You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    12 jobs found for Machine operator in Minnesota

    Filter3
    Clear all
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 3:00 PM - 11:00 PM
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:00 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:00 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $18.00 - $19.50 per hour
      • 10:40 PM - 7:00 AM
      Notifies Team Lead/Operator of quality issues or profile adjustments needed.Reads and understands blue prints and job package.Reads counters, changes lengths and maintains records of production.Ensures all tools are accounted for and put away.Cuts boxes, does packaging end of line tool checks and other packaging aspects as directed by the Team Lead.Performs Total Preventative Maintenance as directed by Team LeadWillingly works in other departments as directed.Able to work in a team environment to the cell aspects.Willingly takes direction from the Team Lead.Maintains required material levels.Follows standard work where ever applicable.May be required to perform other duties as neededResponsibilities:responsibilities: - Packs parts, and performs quality checks, in order to produce quality profiles.Working hours: 10:40 PM - 7:00 AMSkills:Standing, bending, lifting, twisting, and walking on concrete floor.Must be able to lift up to 50 lbs.Read and interpret blueprint and verify dimensions with gauges, which include, optical comparator calipers, push tester, etc.Be able to read 1/64?? and digital ruler.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to work in a cooperative manner with others WHAT ARE YOU WAITING FOR?! | IMMEDIATE OPENINGSSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Notifies Team Lead/Operator of quality issues or profile adjustments needed.Reads and understands blue prints and job package.Reads counters, changes lengths and maintains records of production.Ensures all tools are accounted for and put away.Cuts boxes, does packaging end of line tool checks and other packaging aspects as directed by the Team Lead.Performs Total Preventative Maintenance as directed by Team LeadWillingly works in other departments as directed.Able to work in a team environment to the cell aspects.Willingly takes direction from the Team Lead.Maintains required material levels.Follows standard work where ever applicable.May be required to perform other duties as neededResponsibilities:responsibilities: - Packs parts, and performs quality checks, in order to produce quality profiles.Working hours: 10:40 PM - 7:00 AMSkills:Standing, bending, lifting, twisting, and walking on concrete floor.Must be able to lift up to 50 lbs.Read and interpret blueprint and verify dimensions with gauges, which include, optical comparator calipers, push tester, etc.Be able to read 1/64?? and digital ruler.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to work in a cooperative manner with others WHAT ARE YOU WAITING FOR?! | IMMEDIATE OPENINGSSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.50 - $19.50 per hour
      • 7:00 AM - 3:00 PM
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.50 - $19.50 per hour
      • 11:00 PM - 7:00 AM
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 11:00 PM - 7:00 AMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. COME AND GET THEM - GREAT PERMANENT JOB OPPORTUNITIES!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 11:00 PM - 7:00 AMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. COME AND GET THEM - GREAT PERMANENT JOB OPPORTUNITIES!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.50 - $19.50 per hour
      • 3:00 PM - 11:00 PM
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 3:00 PM - 11:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. WONDERFUL FULL-TIME DIRECT HIRE POSITIONS!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 3:00 PM - 11:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. WONDERFUL FULL-TIME DIRECT HIRE POSITIONS!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $18.00 - $19.50 per hour
      • 2:40 PM - 11:00 PM
      Notifies Team Lead/Operator of quality issues or profile adjustments needed.Reads and understands blue prints and job package.Reads counters, changes lengths and maintains records of production.Ensures all tools are accounted for and put away.Cuts boxes, does packaging end of line tool checks and other packaging aspects as directed by the Team Lead.Performs Total Preventative Maintenance as directed by Team LeadWillingly works in other departments as directed.Able to work in a team environment to the cell aspects.Willingly takes direction from the Team Lead.Maintains required material levels.Follows standard work where ever applicable.May be required to perform other duties as needed.Responsibilities:Responsibilities: - Packs parts, and performs quality checks, in order to produce quality profiles.Working hours: 2:40 PM - 11:00 PMSkills:Standing, bending, lifting, twisting, and walking on concrete floor.Must be able to lift up to 50 lbs.Read and interpret blueprint and verify dimensions with gauges, which include, optical comparator calipers, push tester, etc.Be able to read 1/64?? and digital ruler.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to work in a cooperative manner with others THESE JOBS WILL NOT LAST LONG | AMAZING OPPORTUNITIES!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Notifies Team Lead/Operator of quality issues or profile adjustments needed.Reads and understands blue prints and job package.Reads counters, changes lengths and maintains records of production.Ensures all tools are accounted for and put away.Cuts boxes, does packaging end of line tool checks and other packaging aspects as directed by the Team Lead.Performs Total Preventative Maintenance as directed by Team LeadWillingly works in other departments as directed.Able to work in a team environment to the cell aspects.Willingly takes direction from the Team Lead.Maintains required material levels.Follows standard work where ever applicable.May be required to perform other duties as needed.Responsibilities:Responsibilities: - Packs parts, and performs quality checks, in order to produce quality profiles.Working hours: 2:40 PM - 11:00 PMSkills:Standing, bending, lifting, twisting, and walking on concrete floor.Must be able to lift up to 50 lbs.Read and interpret blueprint and verify dimensions with gauges, which include, optical comparator calipers, push tester, etc.Be able to read 1/64?? and digital ruler.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to work in a cooperative manner with others THESE JOBS WILL NOT LAST LONG | AMAZING OPPORTUNITIES!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $18.00 - $19.50 per hour
      • 6:40 AM - 3:00 PM
      Follows all standard safety procedures as outlined and stated in the Awair Policy and uses all approved safety devices and equipment at all times.Packs parts on extrusion lines, may be required to package multiple lines.Responsible for all aspects of quality checking and recording on the lines being packaged. Also performs quality doublechecks for other lines.Responsibilities:Notifies Team Lead/Operator of quality issues or profile adjustments needed.Reads and understands blue prints and job package.Reads counters, changes lengths and maintains records of production.Ensures all tools are accounted for and put away.Cuts boxes, does packaging end of line tool checks and other packaging aspects as directed by the Team Lead.Performs Total Preventative Maintenance as directed by Team LeadWillingly works in other departments as directed.Able to work in a team environment to the cell aspects.Willingly takes direction from the Team Lead.Maintains required material levels.Follows standard work where ever applicable.May be required to perform other duties as needed.Working hours: 6:40 AM - 3:00 PMSkills:Standing, bending, lifting, twisting, and walking on concrete floor.Must be able to lift up to 50 lbs.Read and interpret blueprint and verify dimensions with gauges, which include, optical comparator calipers, push tester, etc.Be able to read 1/64?? and digital ruler.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to work in a cooperative manner with others APPLY TODAY!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Follows all standard safety procedures as outlined and stated in the Awair Policy and uses all approved safety devices and equipment at all times.Packs parts on extrusion lines, may be required to package multiple lines.Responsible for all aspects of quality checking and recording on the lines being packaged. Also performs quality doublechecks for other lines.Responsibilities:Notifies Team Lead/Operator of quality issues or profile adjustments needed.Reads and understands blue prints and job package.Reads counters, changes lengths and maintains records of production.Ensures all tools are accounted for and put away.Cuts boxes, does packaging end of line tool checks and other packaging aspects as directed by the Team Lead.Performs Total Preventative Maintenance as directed by Team LeadWillingly works in other departments as directed.Able to work in a team environment to the cell aspects.Willingly takes direction from the Team Lead.Maintains required material levels.Follows standard work where ever applicable.May be required to perform other duties as needed.Working hours: 6:40 AM - 3:00 PMSkills:Standing, bending, lifting, twisting, and walking on concrete floor.Must be able to lift up to 50 lbs.Read and interpret blueprint and verify dimensions with gauges, which include, optical comparator calipers, push tester, etc.Be able to read 1/64?? and digital ruler.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to work in a cooperative manner with others APPLY TODAY!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $19.50 - $22.50 per hour
      • 3:00 PM - 11:00 PM
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection of coated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts. WHY WAIT | GREAT JOB OPPORTUNITIES NOW | APPLYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection of coated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts. WHY WAIT | GREAT JOB OPPORTUNITIES NOW | APPLYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $19.50 - $22.50 per hour
      • 11:00 PM - 7:00 AM
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required or requested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 11:00 PM - 7:00 AMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability to read shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts APPLY TODAY | FULLTIME OPPORTUNITIES AVAILABLE NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required or requested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 11:00 PM - 7:00 AMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability to read shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts APPLY TODAY | FULLTIME OPPORTUNITIES AVAILABLE NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $19.00 - $23.00 per hour
      • 3:00 PM - 11:00 PM
      $1500 Work Bonus | Direct HireFor assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts. DON'T WAIT, JOBS ARE GOING FAST!! APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      $1500 Work Bonus | Direct HireFor assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts. DON'T WAIT, JOBS ARE GOING FAST!! APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $18.50 - $21.50 per hour
      • 7:00 AM - 3:00 PM
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection of coated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability to read shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receives specific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should be rejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts. APPLY TODAY | GREAT OPPORTUNITIES | THESE WON'T LAST LONG!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection of coated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability to read shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receives specific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should be rejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts. APPLY TODAY | GREAT OPPORTUNITIES | THESE WON'T LAST LONG!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Waseca, Minnesota
      • Permanent
      • $20.00 per hour
      • 2:00 PM - 12:00 AM
      Responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly. Mechanical experience required.Responsibilities:oPrepare machines by loading, positioning, and adjusting materials to start a production cycle according to standard operating procedure.oEnsure all safety devices are fully operational and safety procedures are being observed.oControl and adjust machine settings.oFeed raw materials or parts to semi-automated machinery.oPreform quality checks and inspection on finished materials.oKeep records of approved and defective units.oMaintain activity logs.oRemove finished materials from machinery.oPackage materials according to job specifications.oPalletize and complete orders.oMaintain work area in neat and orderly condition.oPerform other duties as assigned.Working hours: 2:00 PM - 12:00 AMSkills:The skill levels required to operate this machine may vary with the type of machine being operated, the number of machines being operated and the frequency of change-overs on those machines. Different levels of operator skill shall be needed for set-up, skills and speed required to operate this machine successfully.Education:No Degree RequiredExperience:0-1 yearsQualifications:oExcellent safety and attendance record.oBasic knowledge in math, addition, subtraction, multiplication, division, and percentages.oWorking knowledge of manufacturing equipment and tools.oPossesses basic computer skills.oEffective communication skills.oAbility to report on time for scheduled shifts and follow company attendance policies.oMust be able to stand and walk for extended periods of time.oMust be able to continually bend, stoop, crouch, reach above shoulder, use arms, wrists, grasp and squeeze with hands, access constricted spaces, and lift and carry up to 75 lbs.Candidates must pass a pre-employment background check, drug screen and be eligible for employment without sponsorship. Direct Hire position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business. New facility, new machinery, A/C plant! NO Weekends and NO Holidays! Benefits include:Medical insurance with company contributionDentalVision Insurance401K Health Savings AccountCompany paid life, short and long-term disability insurancePaid Holidays and paid time offCompany sponsored retirement plan with matching contributionsTuition ReimbursementParental leaveReferral programTuition ReimbursementSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly. Mechanical experience required.Responsibilities:oPrepare machines by loading, positioning, and adjusting materials to start a production cycle according to standard operating procedure.oEnsure all safety devices are fully operational and safety procedures are being observed.oControl and adjust machine settings.oFeed raw materials or parts to semi-automated machinery.oPreform quality checks and inspection on finished materials.oKeep records of approved and defective units.oMaintain activity logs.oRemove finished materials from machinery.oPackage materials according to job specifications.oPalletize and complete orders.oMaintain work area in neat and orderly condition.oPerform other duties as assigned.Working hours: 2:00 PM - 12:00 AMSkills:The skill levels required to operate this machine may vary with the type of machine being operated, the number of machines being operated and the frequency of change-overs on those machines. Different levels of operator skill shall be needed for set-up, skills and speed required to operate this machine successfully.Education:No Degree RequiredExperience:0-1 yearsQualifications:oExcellent safety and attendance record.oBasic knowledge in math, addition, subtraction, multiplication, division, and percentages.oWorking knowledge of manufacturing equipment and tools.oPossesses basic computer skills.oEffective communication skills.oAbility to report on time for scheduled shifts and follow company attendance policies.oMust be able to stand and walk for extended periods of time.oMust be able to continually bend, stoop, crouch, reach above shoulder, use arms, wrists, grasp and squeeze with hands, access constricted spaces, and lift and carry up to 75 lbs.Candidates must pass a pre-employment background check, drug screen and be eligible for employment without sponsorship. Direct Hire position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business. New facility, new machinery, A/C plant! NO Weekends and NO Holidays! Benefits include:Medical insurance with company contributionDentalVision Insurance401K Health Savings AccountCompany paid life, short and long-term disability insurancePaid Holidays and paid time offCompany sponsored retirement plan with matching contributionsTuition ReimbursementParental leaveReferral programTuition ReimbursementSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    Explore over 12 jobs in Minnesota

    It looks like you want to switch your language. This will reset your filters on your current job search.