You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    17 jobs found for Welding in Minnesota

    Filter2
    Clear all
      • Owatonna, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 5:00 AM - 4:00 PM (Various Shifts Available)
      TOURING TUESDAYS - HIRING EVENT!!MAY 24TH, 2022Hiring Event Schedule   2:00 PM - 6:00 PMBenefitsSign-on BonusesYear-end cash bonusPerformance and wage review after 90 days of employmentPaid HolidaysPTOSafety equipment reimbursementProfit-sharing and 401K ContributionsMedical, Dental, Vision, 401K, Short/Long Term Disability, and much moreOvertime AvailableCompetitive SalariesClean work environmentResponsibilities:Assembly Responsibilities:Follow technical instructions, interpret engineering blueprints and technical termsDiscern quality of parts and materials used in productionInventory parts and tools used in the assembling processFollow company procedures and directivesTest finished products for defectsMaintain the tools used to create productsKeep a clean and well-maintained workspaceWelding Responsibilities:Responsible for designing, cutting, and permanently joining metal parts together by using high heat equipment and welding processes such as MIG, TIG, and arc welding.Operate hand-welding and flame-cutting equipment such as an oxyacetylene torch, electric arc machine, and robotic welding cells.Working with materials such as steel, iron, and titanium, and composite materials such as plastics.Able to set up and install welding components/equipment according to set specificationsAble to read blueprints and drawings to identify welding measurements and positions.Fabricator Responsibilities:Able to fabricate sheet metalSet up job and proper toolingShear, punch, brake, and fabricate parts per established procedures and production standardsAble to use measuring tools accurately including angle gauges, tape measure, and Vernier calipersAble to read blueprints and interpret dimensions and tolerancesWorking hours: 5:00 AM - 4:00 PM (Various Shifts Available)Skills:Able to Weld, Fabricate or Assemble partsOperate hand and power toolsRead blueprintsEducation:High SchoolExperience:0-1 yearsQualifications:Experience in Welding, Fabrication or Assembly APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      TOURING TUESDAYS - HIRING EVENT!!MAY 24TH, 2022Hiring Event Schedule   2:00 PM - 6:00 PMBenefitsSign-on BonusesYear-end cash bonusPerformance and wage review after 90 days of employmentPaid HolidaysPTOSafety equipment reimbursementProfit-sharing and 401K ContributionsMedical, Dental, Vision, 401K, Short/Long Term Disability, and much moreOvertime AvailableCompetitive SalariesClean work environmentResponsibilities:Assembly Responsibilities:Follow technical instructions, interpret engineering blueprints and technical termsDiscern quality of parts and materials used in productionInventory parts and tools used in the assembling processFollow company procedures and directivesTest finished products for defectsMaintain the tools used to create productsKeep a clean and well-maintained workspaceWelding Responsibilities:Responsible for designing, cutting, and permanently joining metal parts together by using high heat equipment and welding processes such as MIG, TIG, and arc welding.Operate hand-welding and flame-cutting equipment such as an oxyacetylene torch, electric arc machine, and robotic welding cells.Working with materials such as steel, iron, and titanium, and composite materials such as plastics.Able to set up and install welding components/equipment according to set specificationsAble to read blueprints and drawings to identify welding measurements and positions.Fabricator Responsibilities:Able to fabricate sheet metalSet up job and proper toolingShear, punch, brake, and fabricate parts per established procedures and production standardsAble to use measuring tools accurately including angle gauges, tape measure, and Vernier calipersAble to read blueprints and interpret dimensions and tolerancesWorking hours: 5:00 AM - 4:00 PM (Various Shifts Available)Skills:Able to Weld, Fabricate or Assemble partsOperate hand and power toolsRead blueprintsEducation:High SchoolExperience:0-1 yearsQualifications:Experience in Welding, Fabrication or Assembly APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Detroit Lakes, Minnesota
      • Permanent
      • $20.00 - $25.00 per hour
      • Various Shifts Available
      Spherion Staffing is currently seeking welders in Detroit Lakes. Ideal candidates will have MIG welding experience and be able to read and apply print reading to customer specifications. This is a direct hire opportunity with a growing manufacturing company.Responsibilities:- Weld parts to specification using torch / plasma cutting- Primarily MIG welding with an occasional need to do TIG weld- Weld steel and stainless components according to blueprints and customer orders- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Ability to read blue prints- Team player- MIG welding experienceEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to consistently lift varying weights to shoulder level and higher- Ability to work on repetitive tasks for long periods of timeSchedule: 1st shift: 6a - 2:15p Mon - Fri2nd shift: 2:15 pm - 12:30 am Mon - Thurs To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is currently seeking welders in Detroit Lakes. Ideal candidates will have MIG welding experience and be able to read and apply print reading to customer specifications. This is a direct hire opportunity with a growing manufacturing company.Responsibilities:- Weld parts to specification using torch / plasma cutting- Primarily MIG welding with an occasional need to do TIG weld- Weld steel and stainless components according to blueprints and customer orders- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Ability to read blue prints- Team player- MIG welding experienceEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to consistently lift varying weights to shoulder level and higher- Ability to work on repetitive tasks for long periods of timeSchedule: 1st shift: 6a - 2:15p Mon - Fri2nd shift: 2:15 pm - 12:30 am Mon - Thurs To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $20.00 - $25.00 per hour
      • 4:45 PM - 3:15 AM
      You're an amazing welder; you have trained, you have honed your skills but you are seeking out the right opportunity, yes? Something that suits you, an environment you like, a culture you can jump on board with.We have an opportunity you should have a look at! Spherion is seeking our welders with experience in finish work as well. Applicants should be comfortable in a manufacturing setting and should be comfortable welding and working around fabrication equipment.Monday - Thursday 4:45PM - 3:15AM; OT on FridaysResponsibilities:Welding through established manufacturing processes with minimum instruction and minimum supervisionPerform complete welding and finishing operations Accurately maintain required production recordsMaintain cleanliness of assigned work areaMonitor equipment functionality and report maintenance needsAssist other new welders in learning welding skillsComplete and follow all safety procedures and policiesComplete company provided training to effectively perform required job responsibilitiesWorking hours: 4:45 PM - 3:15 AMSkills:Ability to read and interpret documents such as work instructions and blueprintsAbility to read and execute on SOP, quality and safety processesAbility to use handheld measuring tools such as a tape measure, combination square, and other measuring instrumentsAbility to maintain a high level of accuracy and attention to detailStrong problem-solving skillsAbility to work independentlyGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishA minimum of 2 years experience in a fabrication environment including drilling, welding, and various hand toolsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      You're an amazing welder; you have trained, you have honed your skills but you are seeking out the right opportunity, yes? Something that suits you, an environment you like, a culture you can jump on board with.We have an opportunity you should have a look at! Spherion is seeking our welders with experience in finish work as well. Applicants should be comfortable in a manufacturing setting and should be comfortable welding and working around fabrication equipment.Monday - Thursday 4:45PM - 3:15AM; OT on FridaysResponsibilities:Welding through established manufacturing processes with minimum instruction and minimum supervisionPerform complete welding and finishing operations Accurately maintain required production recordsMaintain cleanliness of assigned work areaMonitor equipment functionality and report maintenance needsAssist other new welders in learning welding skillsComplete and follow all safety procedures and policiesComplete company provided training to effectively perform required job responsibilitiesWorking hours: 4:45 PM - 3:15 AMSkills:Ability to read and interpret documents such as work instructions and blueprintsAbility to read and execute on SOP, quality and safety processesAbility to use handheld measuring tools such as a tape measure, combination square, and other measuring instrumentsAbility to maintain a high level of accuracy and attention to detailStrong problem-solving skillsAbility to work independentlyGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishA minimum of 2 years experience in a fabrication environment including drilling, welding, and various hand toolsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 3:00 PM - 11:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 11:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualificatio
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 11:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualificatio
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 3:00 PM - 11:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 11:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualificatio
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 11:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualificatio
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $18.00 per hour
      • 7:00 AM - 3:15 PM
      Focus on assembling and building machinery through performing a variety of functions in the assembly and fabrication area including but not limited to welding, sawing, drilling, tapping, reaming, and machining. Will use calibrated equipment and machinery, engineering, and simple drawings, as well as written and verbal instructions to perform basic tasks. Will also perform sub assembly and final assembly processes on a variety of mechanical assemblies.Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blueprints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change. Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions. Fabricate components from blueprints and verbal instructions. Perform assignments in accordance with written quality procedures. Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects. Ensure compliance to safety rules and procedures. Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers. Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics. Communicate with engineers, designers, and technicians to resolve assembly discrepancies. Perform ongoing inspection of product during assembly and wiring process and prior to product?s shipment. Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly. Maintain a clean, safe, and orderly work area. Familiar with mechanical and electromechanical components. Perform checks for quality of parts and adjust as required. Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 7:00 AM - 3:15 PMSkills:--Mechanically inclined.--Effectively and safely operate a variety of assigned tools and equipment.--Ability to work independently and in a team setting.--May require heavy lifting.--Proficient with precision measuring instruments. (tape measure, calipers)--Problem solving skills.--.Education:High SchoolExperience:0-1 yearsQualifications:HS Diploma or equivalent.Passing pre-employment drug screen. Direct Hire position. Work for a company voted Best Place to Work many times, and 100% Employee Owed! BENEFITS!
      Focus on assembling and building machinery through performing a variety of functions in the assembly and fabrication area including but not limited to welding, sawing, drilling, tapping, reaming, and machining. Will use calibrated equipment and machinery, engineering, and simple drawings, as well as written and verbal instructions to perform basic tasks. Will also perform sub assembly and final assembly processes on a variety of mechanical assemblies.Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blueprints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change. Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions. Fabricate components from blueprints and verbal instructions. Perform assignments in accordance with written quality procedures. Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects. Ensure compliance to safety rules and procedures. Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers. Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics. Communicate with engineers, designers, and technicians to resolve assembly discrepancies. Perform ongoing inspection of product during assembly and wiring process and prior to product?s shipment. Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly. Maintain a clean, safe, and orderly work area. Familiar with mechanical and electromechanical components. Perform checks for quality of parts and adjust as required. Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 7:00 AM - 3:15 PMSkills:--Mechanically inclined.--Effectively and safely operate a variety of assigned tools and equipment.--Ability to work independently and in a team setting.--May require heavy lifting.--Proficient with precision measuring instruments. (tape measure, calipers)--Problem solving skills.--.Education:High SchoolExperience:0-1 yearsQualifications:HS Diploma or equivalent.Passing pre-employment drug screen. Direct Hire position. Work for a company voted Best Place to Work many times, and 100% Employee Owed! BENEFITS!
      • Dodge Center, Minnesota
      • Permanent
      • $18.00 - $23.00 per hour
      • 6:00 AM - 4:00 PM (Various Shifts Available)
      ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!1ST AND 2ND SHIFT AVAILABLE $18-23/HR!$1000 HIRING BONUS! $500 ON FIRST DAY!!Responsibilities:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!Working hours: 6:00 AM - 4:00 PM (Various Shifts Available)Skills:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!Education:High SchoolExperience:0-1 yearsQualifications:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!! APPLY NOW!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!1ST AND 2ND SHIFT AVAILABLE $18-23/HR!$1000 HIRING BONUS! $500 ON FIRST DAY!!Responsibilities:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!Working hours: 6:00 AM - 4:00 PM (Various Shifts Available)Skills:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!Education:High SchoolExperience:0-1 yearsQualifications:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!! APPLY NOW!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Detroit Lakes, Minnesota
      • Permanent
      • $24.00 - $26.00 per hour
      • Various Shifts Available
      Are you good at troubleshooting? Do you have a background in maintaining and repairing machines? Spherion Staffing currently has an opening for maintenance technician in the manufacturing industry. This is a direct hire opportunity with benefits available.Responsibilities:- Work with operations to ensure plant equipment is operating when necessary, through diagnosis, troubleshooting, and repair. Issues may be mechanical or electrical.- Perform preventative maintenance on all plant equipment to ensure maximum productivity.- Work with operations to focus on improving productivity through the use of improvements in machines, materials, or processes.- Install and troubleshoot any new equipment as directed.- Repairs die lubrication systems- Clean/Lubricate shafts, bearings, gears, and other machinery- Fabricate equipment to meet maintenance requirements.- Change filers and fluids as needed- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Ability to read and interpret blueprints- Welding and soldering experience- Experience installing and repairing equipment, such as small electrical components- Team player- Manual dexterity- Experience using power toolsEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to stand 8-10 hours per day- Ability to bend, twist, kneel, inspect- One year of maintenance and/or electrical maintenance experience preferredSchedule:1st and 2nd shift available.1st shift: Mon - Fri 7 am - 3:30pm2nd shift: Mon - Thurs 3:30 pm - 2 am To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you good at troubleshooting? Do you have a background in maintaining and repairing machines? Spherion Staffing currently has an opening for maintenance technician in the manufacturing industry. This is a direct hire opportunity with benefits available.Responsibilities:- Work with operations to ensure plant equipment is operating when necessary, through diagnosis, troubleshooting, and repair. Issues may be mechanical or electrical.- Perform preventative maintenance on all plant equipment to ensure maximum productivity.- Work with operations to focus on improving productivity through the use of improvements in machines, materials, or processes.- Install and troubleshoot any new equipment as directed.- Repairs die lubrication systems- Clean/Lubricate shafts, bearings, gears, and other machinery- Fabricate equipment to meet maintenance requirements.- Change filers and fluids as needed- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Ability to read and interpret blueprints- Welding and soldering experience- Experience installing and repairing equipment, such as small electrical components- Team player- Manual dexterity- Experience using power toolsEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to stand 8-10 hours per day- Ability to bend, twist, kneel, inspect- One year of maintenance and/or electrical maintenance experience preferredSchedule:1st and 2nd shift available.1st shift: Mon - Fri 7 am - 3:30pm2nd shift: Mon - Thurs 3:30 pm - 2 am To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hawley, Minnesota
      • Permanent
      • $21.00 - $26.00 per hour
      • 6:00 AM - 4:30 PM
      Do you have manufacturing experience? Are you seeking your next career opportunity with a growing company? Spherion Staffing is currently seeking experienced Fabricators. These are direct hire opportunities.Responsibilities:- Observes operation of equipment and verifies conformance of the work piece to specifications- Perform tooling changes- Perform daily inspections and complete routine maintenance- Assist maintenance and/or service technicians with troubleshooting and basic repairs- Prepare/stage parts for the next operation- Ability to operate a variety of machinery; shear, angle shear, drill press, forklift, press break, punch press, etc.Working hours: 6:00 AM - 4:30 PMSkills:- Read and understand blueprintsEducation:No Degree RequiredExperience:0-1 yearsQualifications:- One year of manufacturing fabrication experience- Experience using various welding equipment- Experience operating hand tools and machinesSchedule: Mon - Thurs 6 am - 4:30 pm. OT on Friday as needed. To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Do you have manufacturing experience? Are you seeking your next career opportunity with a growing company? Spherion Staffing is currently seeking experienced Fabricators. These are direct hire opportunities.Responsibilities:- Observes operation of equipment and verifies conformance of the work piece to specifications- Perform tooling changes- Perform daily inspections and complete routine maintenance- Assist maintenance and/or service technicians with troubleshooting and basic repairs- Prepare/stage parts for the next operation- Ability to operate a variety of machinery; shear, angle shear, drill press, forklift, press break, punch press, etc.Working hours: 6:00 AM - 4:30 PMSkills:- Read and understand blueprintsEducation:No Degree RequiredExperience:0-1 yearsQualifications:- One year of manufacturing fabrication experience- Experience using various welding equipment- Experience operating hand tools and machinesSchedule: Mon - Thurs 6 am - 4:30 pm. OT on Friday as needed. To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Dalton, Minnesota
      • Permanent
      • $17.50 - $25.00 per hour
      • 6:00 AM - 4:30 PM
      Are you a welder seeking your next career opportunity? Are you looking to join a growing company where you can put your weld skills to good use? Spherion Staffing currently has direct hire welding opportunities available.Responsibilities:- Lay out, fit, and weld raw materials, fabricated and cast components- Assemble miscellaneous, ornamental, and structural components such as ornamental railings, stairs, ladders, overhead sign structures, building and bridge parts and components- Set up equipment and welds parts using arc, gas-shielded arc, submerged arc, or gas welding equipment- Operate power and hand tools such as grinders, drills, saws- Other duties as assignedWorking hours: 6:00 AM - 4:30 PMSkills:- Basic mathematical skills- Successfully perform AWS welds in flat, horizontal, vertical positionsEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to take and pass weld test- Ability to read and interpret shop drawings- Work in a efficient, safe, accurate manner- Ability to lift up to 50 lbs on a regular basisSchedule:Mon - Thurs 6 am - 4:30 pm. Fri 6 am - noon or job is completed. To be considered, please apply online at www.spherion.com/apply. If you have any questions please contact Missi Abfalter at 218-346-3801.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you a welder seeking your next career opportunity? Are you looking to join a growing company where you can put your weld skills to good use? Spherion Staffing currently has direct hire welding opportunities available.Responsibilities:- Lay out, fit, and weld raw materials, fabricated and cast components- Assemble miscellaneous, ornamental, and structural components such as ornamental railings, stairs, ladders, overhead sign structures, building and bridge parts and components- Set up equipment and welds parts using arc, gas-shielded arc, submerged arc, or gas welding equipment- Operate power and hand tools such as grinders, drills, saws- Other duties as assignedWorking hours: 6:00 AM - 4:30 PMSkills:- Basic mathematical skills- Successfully perform AWS welds in flat, horizontal, vertical positionsEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to take and pass weld test- Ability to read and interpret shop drawings- Work in a efficient, safe, accurate manner- Ability to lift up to 50 lbs on a regular basisSchedule:Mon - Thurs 6 am - 4:30 pm. Fri 6 am - noon or job is completed. To be considered, please apply online at www.spherion.com/apply. If you have any questions please contact Missi Abfalter at 218-346-3801.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $27.00 - $30.00 per hour
      • 6:00 AM - 4:00 PM
      Structural Steel Detailer - DrafterResponsibilities:Drafter transfers information off contract documents/governing codes and draft them in shop drawing format.Working hours: 6:00 AM - 4:00 PMSkills:Proficient at reading and understanding prints and specifications.Knowledgeable in AISC Standard connections, charts and code of standard practices.Knowledgeable in IBC, OSHA, NAAMM, NOMMA, ASTM, and ANSI Codes.Knowledgeable in AWS Welding symbols.Familiar with standard steel shapes and sizes.Good working knowledge of steel joists and deck.Education:No Degree RequiredExperience:1-4 yearsQualifications:Competent at using AutoCAD 2014, SDS2, Microsoft Office, and Adobe.Must be neat, punctual, dependable, have attention to details, follow instructions, work under pressure, organized, able to multi-task and willing to learn.Should be able to make changes to shop drawings and follow through with the changes completely.Ability to pass a drug/alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant: Company 30%, empl 70%. To offset the deductible, company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Structural Steel Detailer - DrafterResponsibilities:Drafter transfers information off contract documents/governing codes and draft them in shop drawing format.Working hours: 6:00 AM - 4:00 PMSkills:Proficient at reading and understanding prints and specifications.Knowledgeable in AISC Standard connections, charts and code of standard practices.Knowledgeable in IBC, OSHA, NAAMM, NOMMA, ASTM, and ANSI Codes.Knowledgeable in AWS Welding symbols.Familiar with standard steel shapes and sizes.Good working knowledge of steel joists and deck.Education:No Degree RequiredExperience:1-4 yearsQualifications:Competent at using AutoCAD 2014, SDS2, Microsoft Office, and Adobe.Must be neat, punctual, dependable, have attention to details, follow instructions, work under pressure, organized, able to multi-task and willing to learn.Should be able to make changes to shop drawings and follow through with the changes completely.Ability to pass a drug/alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant: Company 30%, empl 70%. To offset the deductible, company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Winthrop, Minnesota
      • Permanent
      • $24.00 - $28.00 per hour
      • 6:00 PM - 6:00 AM
      Spherion has a DIRECT HIRE opportunity for a Maintenance/Boiler Technician in Winthrop, MN. This is a full time, direct hire position NO PROBATIONARY period! In this role, and under general direction, you will perform a variety of skilled work in the maintenance, alteration, and repair of mechanical systems, equipment, and tools. Also performs a wide variety of skilled maintenance tasks including daily and routine tasks, and preventive maintenance checks.Hours: 6:00 p.m. - 6:00 a.m. plus two weekends a monthResponsibilities:Responsible to keep management informed of any plant maintenance issues.Repair and maintenance of all plant equipment; primarily equipment and areas.Actively support and implement preventative maintenance programs.Must have welding and electrical experience.Must have ability to troubleshoot issues and repair as necessary.Ensure repairs and maintenance work has a minimal effect on production time.Follow all DFA GMPs and work in a manner consistent with all corporate and regulatory, food safety, quality and sanitation requirements.Attends required training, including but not limited to: GMPs, HAACP, SQF, Safety, etc.Working hours: 6:00 PM - 6:00 AMSkills:Ability to read, speak & understand both oral and written instructionsSkilled in problem solving & willingness to work in a team environmentBasic computer knowledgeEducation:High SchoolExperience:1-4 yearsQualifications:1 year mechanical background required, 2+ years preferredHS Diploma/GED preferredStanding, twisting, pushing, pulling throughout shiftLifting, carrying, and/or lowering 60-90 poundsOccasional lifting, carrying, and/or lowering 90-120 poundsRepetition of hand/wrist, doing simple graspingMust be able to stand for long periods of time Don't wait, apply today! Please call Jennifer at 507-432-2430Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has a DIRECT HIRE opportunity for a Maintenance/Boiler Technician in Winthrop, MN. This is a full time, direct hire position NO PROBATIONARY period! In this role, and under general direction, you will perform a variety of skilled work in the maintenance, alteration, and repair of mechanical systems, equipment, and tools. Also performs a wide variety of skilled maintenance tasks including daily and routine tasks, and preventive maintenance checks.Hours: 6:00 p.m. - 6:00 a.m. plus two weekends a monthResponsibilities:Responsible to keep management informed of any plant maintenance issues.Repair and maintenance of all plant equipment; primarily equipment and areas.Actively support and implement preventative maintenance programs.Must have welding and electrical experience.Must have ability to troubleshoot issues and repair as necessary.Ensure repairs and maintenance work has a minimal effect on production time.Follow all DFA GMPs and work in a manner consistent with all corporate and regulatory, food safety, quality and sanitation requirements.Attends required training, including but not limited to: GMPs, HAACP, SQF, Safety, etc.Working hours: 6:00 PM - 6:00 AMSkills:Ability to read, speak & understand both oral and written instructionsSkilled in problem solving & willingness to work in a team environmentBasic computer knowledgeEducation:High SchoolExperience:1-4 yearsQualifications:1 year mechanical background required, 2+ years preferredHS Diploma/GED preferredStanding, twisting, pushing, pulling throughout shiftLifting, carrying, and/or lowering 60-90 poundsOccasional lifting, carrying, and/or lowering 90-120 poundsRepetition of hand/wrist, doing simple graspingMust be able to stand for long periods of time Don't wait, apply today! Please call Jennifer at 507-432-2430Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $17.20 - $21.00 per hour
      • 1:00 PM - 1:00 AM
      Spherion has a great DIRECT HIRE opportunity for a WEEKEND Maintenance Technician! The ideal candidate will take initiative, solve problems, and make decisions. We are seeking a Maintenance Technician to make sure our equipment is running smoothly Friday, Saturday and Sunday. This is a unique work schedule that could be perfect for someone who has other obligations/interests during the standard work week! Hours: Friday - Sunday, 1:00 p.m. - 1:30 a.m.Responsibilities:Manage start-up to make sure equipment is in proper operating condition.Demand Maintenance as assigned: Skill in diagnosing equipment defects and making necessary repairs.Maintain, repair and troubleshoot machinery, ovens, mechanical lift trucks, and facilities problems as needed for production issues and efficiency.Safety operate various machines, including a Band Saw, Break Press, Mill, Lathe, Grinder, etc.Inspect machines and equipment for conformance with operational standards.Maintain all areas of the shop, boiler room, and the interior/exterior of the plant.Troubleshoot electrical functions (i.e. motors, controls, PLC function, and other basic wiring)Confers with management and suppliers to resolve maintenance problems and recommends measures to improve operations and conditions of machines and equipmentComplete Preventative Maintenance tasks as assigned.Assist with inventory control of tools and parts on hand.Work with tools and power equipment as well as material handling.Operate mechanical forklift, pallet jack, battery-changer and stock picker. Follow Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) training, along with company pre-requisite programs, Standard Operating Procedures (SOPs), and Standard Sanitation Operating Procedures (SSOPs).Performs other duties and responsibilities as necessary.Working hours: 1:00 PM - 1:00 AMSkills:Ability to read and interpret documents such as safety rules, operating and/or maintenance instructions and procedure manuals.Ability to write routine breakdown, preventive maintenance and other maintenance related reports and correspondence.Intermediate verbal communication skills in English.Ability to add and subtract, multiply, and divide using whole numbers, common fractions, and decimals.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades (i.e. welding, tap measure, band saw, lathe, caliper, micrometer, etc.).Self-motivated, able to work unsupervised and with teamsProject orientedMulti-tasking abilityAttention to detailAbility to work in a fast-paced environmentWork well with othersExcellent verbal and written communication skills; must work effectively with all levels of management and team membersEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED1-5 years of related experience and/or training or equivalent combination of education and experiencePreferred: Basic knowledge of manufacturing.Facility maintenance experience preferredIndustrial mechanical experience.Knowledge of hydraulics, pneumatics and electronicsKnowledge of electrical/mechanical safety practicesPrior Knowledge of food processing equipment helpful. Electrical and electrical troubleshooting of 120/240/480 3ph systems.Troubleshooting PLC and frequency drives.Welding (both MIG and TIG).Bachelors Degree Machining or Electrical This is a DIRECT HIRE opportunity. You will be hired direct
      Spherion has a great DIRECT HIRE opportunity for a WEEKEND Maintenance Technician! The ideal candidate will take initiative, solve problems, and make decisions. We are seeking a Maintenance Technician to make sure our equipment is running smoothly Friday, Saturday and Sunday. This is a unique work schedule that could be perfect for someone who has other obligations/interests during the standard work week! Hours: Friday - Sunday, 1:00 p.m. - 1:30 a.m.Responsibilities:Manage start-up to make sure equipment is in proper operating condition.Demand Maintenance as assigned: Skill in diagnosing equipment defects and making necessary repairs.Maintain, repair and troubleshoot machinery, ovens, mechanical lift trucks, and facilities problems as needed for production issues and efficiency.Safety operate various machines, including a Band Saw, Break Press, Mill, Lathe, Grinder, etc.Inspect machines and equipment for conformance with operational standards.Maintain all areas of the shop, boiler room, and the interior/exterior of the plant.Troubleshoot electrical functions (i.e. motors, controls, PLC function, and other basic wiring)Confers with management and suppliers to resolve maintenance problems and recommends measures to improve operations and conditions of machines and equipmentComplete Preventative Maintenance tasks as assigned.Assist with inventory control of tools and parts on hand.Work with tools and power equipment as well as material handling.Operate mechanical forklift, pallet jack, battery-changer and stock picker. Follow Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) training, along with company pre-requisite programs, Standard Operating Procedures (SOPs), and Standard Sanitation Operating Procedures (SSOPs).Performs other duties and responsibilities as necessary.Working hours: 1:00 PM - 1:00 AMSkills:Ability to read and interpret documents such as safety rules, operating and/or maintenance instructions and procedure manuals.Ability to write routine breakdown, preventive maintenance and other maintenance related reports and correspondence.Intermediate verbal communication skills in English.Ability to add and subtract, multiply, and divide using whole numbers, common fractions, and decimals.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades (i.e. welding, tap measure, band saw, lathe, caliper, micrometer, etc.).Self-motivated, able to work unsupervised and with teamsProject orientedMulti-tasking abilityAttention to detailAbility to work in a fast-paced environmentWork well with othersExcellent verbal and written communication skills; must work effectively with all levels of management and team membersEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED1-5 years of related experience and/or training or equivalent combination of education and experiencePreferred: Basic knowledge of manufacturing.Facility maintenance experience preferredIndustrial mechanical experience.Knowledge of hydraulics, pneumatics and electronicsKnowledge of electrical/mechanical safety practicesPrior Knowledge of food processing equipment helpful. Electrical and electrical troubleshooting of 120/240/480 3ph systems.Troubleshooting PLC and frequency drives.Welding (both MIG and TIG).Bachelors Degree Machining or Electrical This is a DIRECT HIRE opportunity. You will be hired direct
      • St Peter, Minnesota
      • Permanent
      • $22.00 - $30.00 per hour
      • 4:00 PM - 2:00 AM
      NEW OPPORTUNITY ALERT! Spherion Staffing, in partnership with -BRP-/-AlumaCraft in St. Peter, is accepting applications for a Direct Hire Maintenance Technician. This is a great opportunity to become a valued team member of a fabulous company.2nd shift hours: Monday - Thursday, 4:00 p.m. - 2:30 a.m., OT on FridayPay: $22.00 - $30.00 an hourResponsibilities:As a Maintenance Technician, you will perform daily maintenance, troubleshooting, and repair of production equipment. This position is responsible for equipment uptime, keeping machines and equipment in working order, and performing other routine machinery maintenance. .Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of buildings does not deteriorate.Inspect drives, motors, and belts, check fluid levels, replace filters, and perform other maintenance actions.Use hand and power tools such as hammers, hoists, saws, drills, and wrenches, as well as precision measuring instruments and electronic testing devices.Assemble, install, and repair wiring, electrical components, pipe systems, plumbing, machinery, and equipment.Diagnose mechanical problems and determine how to correct them, read blueprints, repair manuals, or parts catalogs, as necessary.Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.Record type and cost of maintenance or repair work in a computer maintenance management system (GuideTi CMMS), documenting job instructions, time spent, parts used, and hours worked.Clean or lubricate shafts, bearings, gears, and other parts of machinery.Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools.Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, and schematic diagrams.Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from storerooms.Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.Operate cutting torches or welding equipment to cut or join metal parts.Working hours: 4:00 PM - 2:00 AMSkills:You must have the ability to use a computer for entering work orders and related details such as job instructions, time spent, parts used, and time spent. CNC router and press brake experience a big plus.Will consider those with a Certified Maintenance Technician (CMT) with 0 - 1 year of experience.CNC router and press brake experience is preferred.Good interpersonal skillsAbility to prioritize tasksMust have the ability to use a computer for entering work orders and related details. Efficient in Excel, Word and Google Suite.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma or GED and 1-2 years or experience OR Post-Secondary Certificate or Associates degree Apply on line or call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      NEW OPPORTUNITY ALERT! Spherion Staffing, in partnership with -BRP-/-AlumaCraft in St. Peter, is accepting applications for a Direct Hire Maintenance Technician. This is a great opportunity to become a valued team member of a fabulous company.2nd shift hours: Monday - Thursday, 4:00 p.m. - 2:30 a.m., OT on FridayPay: $22.00 - $30.00 an hourResponsibilities:As a Maintenance Technician, you will perform daily maintenance, troubleshooting, and repair of production equipment. This position is responsible for equipment uptime, keeping machines and equipment in working order, and performing other routine machinery maintenance. .Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of buildings does not deteriorate.Inspect drives, motors, and belts, check fluid levels, replace filters, and perform other maintenance actions.Use hand and power tools such as hammers, hoists, saws, drills, and wrenches, as well as precision measuring instruments and electronic testing devices.Assemble, install, and repair wiring, electrical components, pipe systems, plumbing, machinery, and equipment.Diagnose mechanical problems and determine how to correct them, read blueprints, repair manuals, or parts catalogs, as necessary.Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.Record type and cost of maintenance or repair work in a computer maintenance management system (GuideTi CMMS), documenting job instructions, time spent, parts used, and hours worked.Clean or lubricate shafts, bearings, gears, and other parts of machinery.Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools.Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, and schematic diagrams.Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from storerooms.Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.Operate cutting torches or welding equipment to cut or join metal parts.Working hours: 4:00 PM - 2:00 AMSkills:You must have the ability to use a computer for entering work orders and related details such as job instructions, time spent, parts used, and time spent. CNC router and press brake experience a big plus.Will consider those with a Certified Maintenance Technician (CMT) with 0 - 1 year of experience.CNC router and press brake experience is preferred.Good interpersonal skillsAbility to prioritize tasksMust have the ability to use a computer for entering work orders and related details. Efficient in Excel, Word and Google Suite.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma or GED and 1-2 years or experience OR Post-Secondary Certificate or Associates degree Apply on line or call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 7:00 AM - 3:15 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
      • Owatonna, Minnesota
      • Permanent
      • $20.05 - $23.00 per hour
      • 6:00 AM - 6:00 PM
      Repair and maintain a variety of machinery equipment located within the main plant. Demonstrate a steady, upward progression of skills and ability to do increasingly difficult tasks, the abilities will include but not be limited to the following:Responsibilities:Assist with the efficient flow of product through the assigned area and the major repair and maintenance of all machinery in the assigned area.Work with seasonal employees in their day ? to ? day dutiesHandle minor personnel problems. Refer major problems to the Supervisor / Operation MangerIn the off season, will be involved in any number of maintenance activities including machine repair/overhaul, cleaning, building walkways and work platforms, and assisting in the installation of new processing equipment.Must possess a complete set of tools for industrial maintenance.Must have general knowledge of gas and arc welding, how to cut and thread pipe, bolt and thread sizes, how to fasten pulleys and sprockets on shafts and how to adjust conveyors.Experience with hydraulics and pneumaticsAbility to read precision instruments and blue prints Ability to order parts, communicate with the suppliers and service reps from equipment companies.Maintain work area in a clean and orderly manner.May perform other duties as assigned by the SupervisorAdhere to all Company policies and proceduresNotify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Ability to fabricate equipment / ability to use basic shop mathWorking hours: 6:00 AM - 6:00 PMSkills:Knowledge:-One year related experience and / or trainingLanguage Skills:-Ability to read, write and speak EnglishReasoning Ability:-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.TEAMWORK:-Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or general education degree (GED)While performing the duties of this job, the employee is regularly required to: stand, walk, use hands and fingers to handle, feel objects, tools, or controls and reach with hands and arms.The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and / or move up to 50-75 pounds.WORK ENVIRONMENT:While performing the duties of this job, the employee occasionally works near moving mechanical parts.The noise level in the work environment is usually high. Direct Hire opportunity with a reputable company! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Repair and maintain a variety of machinery equipment located within the main plant. Demonstrate a steady, upward progression of skills and ability to do increasingly difficult tasks, the abilities will include but not be limited to the following:Responsibilities:Assist with the efficient flow of product through the assigned area and the major repair and maintenance of all machinery in the assigned area.Work with seasonal employees in their day ? to ? day dutiesHandle minor personnel problems. Refer major problems to the Supervisor / Operation MangerIn the off season, will be involved in any number of maintenance activities including machine repair/overhaul, cleaning, building walkways and work platforms, and assisting in the installation of new processing equipment.Must possess a complete set of tools for industrial maintenance.Must have general knowledge of gas and arc welding, how to cut and thread pipe, bolt and thread sizes, how to fasten pulleys and sprockets on shafts and how to adjust conveyors.Experience with hydraulics and pneumaticsAbility to read precision instruments and blue prints Ability to order parts, communicate with the suppliers and service reps from equipment companies.Maintain work area in a clean and orderly manner.May perform other duties as assigned by the SupervisorAdhere to all Company policies and proceduresNotify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Ability to fabricate equipment / ability to use basic shop mathWorking hours: 6:00 AM - 6:00 PMSkills:Knowledge:-One year related experience and / or trainingLanguage Skills:-Ability to read, write and speak EnglishReasoning Ability:-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.TEAMWORK:-Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or general education degree (GED)While performing the duties of this job, the employee is regularly required to: stand, walk, use hands and fingers to handle, feel objects, tools, or controls and reach with hands and arms.The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and / or move up to 50-75 pounds.WORK ENVIRONMENT:While performing the duties of this job, the employee occasionally works near moving mechanical parts.The noise level in the work environment is usually high. Direct Hire opportunity with a reputable company! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.00 - $35.00 per hour
      • 6:00 AM - 6:00 PM
      Operate and maintain the boiler generation system, air compressor and fire sprinkler system.Responsibilities:Troubleshoot boiler equipment, dealkalizers system, air compressors, and fire sprinkler systems and make the necessary repairs.Analyze and interpret the chemical composition of the boiler water.Maintain accurate records of boiler operations.Must know how to weld and use a cutting torch. Should have a thorough knowledge of pipe threading and welding. Should know the ratings for SCH 40 and SCH 80 pipe, both black and galvanized.Must have a thorough knowledge of all plant steam generation systems and equipment. Must know how to operate and service all steam heating units and steam water-heating units. Must know how to run all chemical tests necessary to operate the boiler.Ability to keep all boilers operating as plant load dictates, monitor boilers, water levels, check water quantities of softeners and dealkalizers and equipment is working properly.Ability to make necessary repairs in the boiler room as needed and maintain safety / efficiency of the boiler room.Boiler operator will monitor doors and lights when plant is not in operations, also includes fire alarm system during shift.Boiler operator will be assigned to work and assist in the cooker jams, repairs or adjustments.Must possess a complete set of tools for mechanical maintenance.Must be able to work independently on all equipment. Should require no supervision.Must be familiar with standard boiler safety procedures, state laws governing boiler safety, and all company safety policies.Back up to Chief Engineer for on call status.Properly maintain / perform preventive maintenance on all heating ventilation and cooling equipment (HVAC).All boiler operators will adhere to instructions from the assigned boiler chief in charge.Boiler operators may be assigned work duties from their manager or chief in charge.Boiler operators will monitor all air systems and vacuum systems where applicable and make necessary arrangements to maintain an adequate air supply and check for excess moisture in the system and bleed system if needed.Maintain work area in a clean and orderly manner. May perform other duties as assigned by the Supervisor. Adhere to all Lakeside Foods policies and procedures.Notify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Working hours: 6:00 AM - 6:00 PMSkills:Language Skills:--Ability to read and to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: --Ability to apply common sense understanding to carry out instructions furnished in written and oral, or diagram form.--Ability to deal with problems involving several concrete variables in standardized situations.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and Lakeside as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand; walk; use hands and fingers to handle or feel objects, tools, or controls and reach with hands and arms. --The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.--The employee must regularly lift and/or move up to 50 po
      Operate and maintain the boiler generation system, air compressor and fire sprinkler system.Responsibilities:Troubleshoot boiler equipment, dealkalizers system, air compressors, and fire sprinkler systems and make the necessary repairs.Analyze and interpret the chemical composition of the boiler water.Maintain accurate records of boiler operations.Must know how to weld and use a cutting torch. Should have a thorough knowledge of pipe threading and welding. Should know the ratings for SCH 40 and SCH 80 pipe, both black and galvanized.Must have a thorough knowledge of all plant steam generation systems and equipment. Must know how to operate and service all steam heating units and steam water-heating units. Must know how to run all chemical tests necessary to operate the boiler.Ability to keep all boilers operating as plant load dictates, monitor boilers, water levels, check water quantities of softeners and dealkalizers and equipment is working properly.Ability to make necessary repairs in the boiler room as needed and maintain safety / efficiency of the boiler room.Boiler operator will monitor doors and lights when plant is not in operations, also includes fire alarm system during shift.Boiler operator will be assigned to work and assist in the cooker jams, repairs or adjustments.Must possess a complete set of tools for mechanical maintenance.Must be able to work independently on all equipment. Should require no supervision.Must be familiar with standard boiler safety procedures, state laws governing boiler safety, and all company safety policies.Back up to Chief Engineer for on call status.Properly maintain / perform preventive maintenance on all heating ventilation and cooling equipment (HVAC).All boiler operators will adhere to instructions from the assigned boiler chief in charge.Boiler operators may be assigned work duties from their manager or chief in charge.Boiler operators will monitor all air systems and vacuum systems where applicable and make necessary arrangements to maintain an adequate air supply and check for excess moisture in the system and bleed system if needed.Maintain work area in a clean and orderly manner. May perform other duties as assigned by the Supervisor. Adhere to all Lakeside Foods policies and procedures.Notify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Working hours: 6:00 AM - 6:00 PMSkills:Language Skills:--Ability to read and to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: --Ability to apply common sense understanding to carry out instructions furnished in written and oral, or diagram form.--Ability to deal with problems involving several concrete variables in standardized situations.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and Lakeside as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand; walk; use hands and fingers to handle or feel objects, tools, or controls and reach with hands and arms. --The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.--The employee must regularly lift and/or move up to 50 po

    Thank you for subscribing to your personalized job alerts.

    Explore over 7 jobs in Minnesota

    It looks like you want to switch your language. This will reset your filters on your current job search.