Thank you for subscribing to your personalized job alerts.

    43 jobs found in Northwood, Iowa

    Filter2
    Clear all
      • Northwood, Iowa
      • Permanent
      • $18.11 - $22.05 per hour
      • 6:00 AM - 4:30 PM
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hayward, Minnesota
      • Permanent
      • $17.00 - $25.00 per hour
      • 7:00 AM - 4:15 PM
      This position designs and develops new models, mechanisms, devices, machinery, or adaptations for products under the direction of a Product Engineer. Responsible for correct proportions, consideration of stress, speed, motion, weight, operational details, customer specifications, and the incorporation of usable parts that may be in production. Designs are to include appropriate dimensions, tolerances, fasteners, and joining requirements. Works with engineers to complete the design documentation package including BOM's and routings.Responsibilities: Performs complex engineering calculations using algebraic, trigonometric, and geometric formulas. Uses standard product engineering data to develop product configuration. Utilizes computer aided design techniques to perform applicable design work. May supervise experimental manufacture and testing of finished product. Acts as the design lead for major projects and may supervise the activities of other designers and drafters.OTHER DUTIESPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.Working hours: 7:00 AM - 4:15 PMSkills:-High mechanical aptitude-Organizational skills-Must be able to adapt to a physically demanding environment and maintain positive demeanor.Education:High SchoolExperience:1-4 yearsQualifications: High School Diploma or equivalent Must be 18 years of age or older Requires a two-year technical degree/certification. Requires a high degree of technical knowledge and skill. Requires four years of experience in mechanical drafting and design. Must be able to adapt to a physically demanding environment and maintain positive demeanor. Requires passing a pre-employment screening and drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position designs and develops new models, mechanisms, devices, machinery, or adaptations for products under the direction of a Product Engineer. Responsible for correct proportions, consideration of stress, speed, motion, weight, operational details, customer specifications, and the incorporation of usable parts that may be in production. Designs are to include appropriate dimensions, tolerances, fasteners, and joining requirements. Works with engineers to complete the design documentation package including BOM's and routings.Responsibilities: Performs complex engineering calculations using algebraic, trigonometric, and geometric formulas. Uses standard product engineering data to develop product configuration. Utilizes computer aided design techniques to perform applicable design work. May supervise experimental manufacture and testing of finished product. Acts as the design lead for major projects and may supervise the activities of other designers and drafters.OTHER DUTIESPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.Working hours: 7:00 AM - 4:15 PMSkills:-High mechanical aptitude-Organizational skills-Must be able to adapt to a physically demanding environment and maintain positive demeanor.Education:High SchoolExperience:1-4 yearsQualifications: High School Diploma or equivalent Must be 18 years of age or older Requires a two-year technical degree/certification. Requires a high degree of technical knowledge and skill. Requires four years of experience in mechanical drafting and design. Must be able to adapt to a physically demanding environment and maintain positive demeanor. Requires passing a pre-employment screening and drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hayward, Minnesota
      • Permanent
      • $15.00 per hour
      • 6:00 AM - 3:15 PM
      This position will shot blast equipment components to prepare them for lining or painting, shot blast various parts for external customers as specified, and perform glass blast stainless steel components for final appearance after fabrication or welding. Will assist in fabrication and assembly areas.Responsibilities:Operate spray booth for phosphatizing or passivating parts and weldments.Support blasting nozzle for up to ten hours per day in two-hour interval. Report shortages to be replenished to assembly supervisor when supplies run low.Monitor equipment for maintenance and perform preventative maintenance. Perform some preventative maintenance and other duties as assigned. Will assist with lining by using urethane equipment, de-molding, trimming and or grinding to blend seems or custom fit other parts. Will work with two-part urethane in an uncured state, silicone in an uncured state, primer in an uncured state, liquid mold release and xylene on a regular basis. Periodically may be off-site for installation of equipment.Working hours: 6:00 AM - 3:15 PMSkills:-High mechanical aptitude-Organizational skills-Must be able to adapt to a physically demanding environment and maintain positive demeanor. -Must be able to learn blasting and lining techniques, operate equipment, hand tools and lift up to 60lbs and climb a ladder.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentRequired to pass a pre-employment drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position will shot blast equipment components to prepare them for lining or painting, shot blast various parts for external customers as specified, and perform glass blast stainless steel components for final appearance after fabrication or welding. Will assist in fabrication and assembly areas.Responsibilities:Operate spray booth for phosphatizing or passivating parts and weldments.Support blasting nozzle for up to ten hours per day in two-hour interval. Report shortages to be replenished to assembly supervisor when supplies run low.Monitor equipment for maintenance and perform preventative maintenance. Perform some preventative maintenance and other duties as assigned. Will assist with lining by using urethane equipment, de-molding, trimming and or grinding to blend seems or custom fit other parts. Will work with two-part urethane in an uncured state, silicone in an uncured state, primer in an uncured state, liquid mold release and xylene on a regular basis. Periodically may be off-site for installation of equipment.Working hours: 6:00 AM - 3:15 PMSkills:-High mechanical aptitude-Organizational skills-Must be able to adapt to a physically demanding environment and maintain positive demeanor. -Must be able to learn blasting and lining techniques, operate equipment, hand tools and lift up to 60lbs and climb a ladder.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentRequired to pass a pre-employment drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.25 per hour
      • 2:00 PM - 10:30 PM
      FLAVORING OPERATOR (Agglomeration) Job Summary: Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 2:00 PM - 10:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.25, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      FLAVORING OPERATOR (Agglomeration) Job Summary: Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 2:00 PM - 10:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.25, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $20.00 per hour
      • 3:00 PM - 1:15 AM
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 1:15 AMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 1:15 AMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:30 PM
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.61 per hour
      • 6:00 AM - 5:00 PM
      Bagger are filling bags from hoppers and loading onto pallets. Depending on the product line being made, some lines there could be 10 bags per hour, some lines are 30 bags per hour. Bags range from 33 to 55 pounds each.Responsibilities:???Be sure hairnets and/or beard nets and hearing protection are properly worn and in place when entering the building.???Follow all GMP???s, HACCP, and Food Safety programs while in production area.???Correctly fill out required paperwork, such as metal detection sheet, sample bags, and weight check sheet.???When taking samples for lab analysis, make sure they are taken sanitary and safely. ???Responsible for correctly numbering and labeling the finished product.???Acquiring knowledge of the operation of bagging, sealing, and conveying system.???Ensure the weight of finished product is truly what the label states.???Check metal detection as instructed.???Make sure each bag of rework is marked of its contents and taken back to mixer.???Make sure working area is kept neat and tidy throughout entire shift.???Be aware of any changes in the process that may hinder the company???s ability to sell good powder.???Properly inform the incoming shift bagger of any deviations of items that need to be addressed.???Report damaged equipment to a member of management.???Let supervisor know when parts or supplies are needed.???Follow all other safety policy requirements as outlined.???All other duties as dictated by the manager or shift leads.Working hours: 6:00 AM - 5:00 PMSkills:--Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals.--Experience within the food and beverage industry preferred.--Must be able to stand, walk, push or pull for virtually the entire shift. --Ability to lift and place on a pallet, bags weighing up to 25 kg at rate of 90 bags per hour.Education:No Degree RequiredExperience:0-1 yearsQualifications:Passing Drug Screen and pre-employment physical are required. Work where employees are treated like family! Dry Floors, clean casual POSITIVE atmosphere with very friendly Management! Work hard and play hard! The 12hr shifts can get strenuous but the Production Staff averages $60-$70,000 a year with the hours and time and a half on Sundays! It???s not a fast pace, just steady. After 30 days you join the Union and can apply for other positions. The next pay scale is $20.71/hr. AMAZING BENEFITS! Medica Health Insurance covered 70% by employer (100% for spouse), 100% Dental, ST/LT Disability, Company Match 401K, PTO, and more! Employees are provided $185 voucher for Steel Toes boots! There???s even employee showers, lockers and towel service!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Bagger are filling bags from hoppers and loading onto pallets. Depending on the product line being made, some lines there could be 10 bags per hour, some lines are 30 bags per hour. Bags range from 33 to 55 pounds each.Responsibilities:???Be sure hairnets and/or beard nets and hearing protection are properly worn and in place when entering the building.???Follow all GMP???s, HACCP, and Food Safety programs while in production area.???Correctly fill out required paperwork, such as metal detection sheet, sample bags, and weight check sheet.???When taking samples for lab analysis, make sure they are taken sanitary and safely. ???Responsible for correctly numbering and labeling the finished product.???Acquiring knowledge of the operation of bagging, sealing, and conveying system.???Ensure the weight of finished product is truly what the label states.???Check metal detection as instructed.???Make sure each bag of rework is marked of its contents and taken back to mixer.???Make sure working area is kept neat and tidy throughout entire shift.???Be aware of any changes in the process that may hinder the company???s ability to sell good powder.???Properly inform the incoming shift bagger of any deviations of items that need to be addressed.???Report damaged equipment to a member of management.???Let supervisor know when parts or supplies are needed.???Follow all other safety policy requirements as outlined.???All other duties as dictated by the manager or shift leads.Working hours: 6:00 AM - 5:00 PMSkills:--Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals.--Experience within the food and beverage industry preferred.--Must be able to stand, walk, push or pull for virtually the entire shift. --Ability to lift and place on a pallet, bags weighing up to 25 kg at rate of 90 bags per hour.Education:No Degree RequiredExperience:0-1 yearsQualifications:Passing Drug Screen and pre-employment physical are required. Work where employees are treated like family! Dry Floors, clean casual POSITIVE atmosphere with very friendly Management! Work hard and play hard! The 12hr shifts can get strenuous but the Production Staff averages $60-$70,000 a year with the hours and time and a half on Sundays! It???s not a fast pace, just steady. After 30 days you join the Union and can apply for other positions. The next pay scale is $20.71/hr. AMAZING BENEFITS! Medica Health Insurance covered 70% by employer (100% for spouse), 100% Dental, ST/LT Disability, Company Match 401K, PTO, and more! Employees are provided $185 voucher for Steel Toes boots! There???s even employee showers, lockers and towel service!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 4:00 AM - 3:15 PM
      This person will engage in a variety of tasks in the Assembly CellResponsibilities:TIG welding and gas soldering. Will perform quality check of parts and adjust as required. Additional duties as assigned by the supervisor or lead.Working hours: 4:00 AM - 3:15 PMSkills:1.-Must have some welding experience. 2.-Must be detail oriented, self-motivated, and able to keep area clean and organized. 3.-Must be able to retain training information.Education:High SchoolExperience:0-1 yearsQualifications:1High-School Diploma or equivalent and be at least 18 years of age.2Required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.3Must be able to work responsibly with limited supervision4Must be capable of lifting and moving up to 30 pounds; frequently lift and move up to 15 pounds5Requires a pre-employment screening, which includes a drug screen. Call to Action: Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This person will engage in a variety of tasks in the Assembly CellResponsibilities:TIG welding and gas soldering. Will perform quality check of parts and adjust as required. Additional duties as assigned by the supervisor or lead.Working hours: 4:00 AM - 3:15 PMSkills:1.-Must have some welding experience. 2.-Must be detail oriented, self-motivated, and able to keep area clean and organized. 3.-Must be able to retain training information.Education:High SchoolExperience:0-1 yearsQualifications:1High-School Diploma or equivalent and be at least 18 years of age.2Required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.3Must be able to work responsibly with limited supervision4Must be capable of lifting and moving up to 30 pounds; frequently lift and move up to 15 pounds5Requires a pre-employment screening, which includes a drug screen. Call to Action: Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:CLASSIFICATIONS:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 7:00 AM - 3:15 PMSkills:-Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.-Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.-Fabricate components from blueprints and verbal instructions.-Perform assignments in accordance with written quality procedures.-Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.-Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! Medical & ST DisabilityHRA ? 100% Employer Contribution, helps pay medical deductibleFree Clinic ? For employees and dependentsLT Disability & Life Insurance ? 100% Employer Pai
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:CLASSIFICATIONS:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 7:00 AM - 3:15 PMSkills:-Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.-Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.-Fabricate components from blueprints and verbal instructions.-Perform assignments in accordance with written quality procedures.-Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.-Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! Medical & ST DisabilityHRA ? 100% Employer Contribution, helps pay medical deductibleFree Clinic ? For employees and dependentsLT Disability & Life Insurance ? 100% Employer Pai
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Tends machine that performs packaging operation.Responsibilities:Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 6:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $18.50/hr, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Tends machine that performs packaging operation.Responsibilities:Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 6:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $18.50/hr, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 3:00 PM - 11:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 11:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualificatio
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 11:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualificatio
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 5:00 AM - 3:15 PM
      This person will engage in the assembling of parts or assemblies into units by interpreting specifications, blueprints, and job orders.Responsibilities:This person will also engage in foaming and tend to machine that sprays resins and foaming materials. This person will also work on duties as assigned by the supervisor or lead person.Working hours: 5:00 AM - 3:15 PMSkills:The ideal candidate will have the following:-The foamer is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.-The foamer must be able to work in repetitive motion with hands, wrist, shoulders, etc. -The foamer must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus-Must be able to work responsibly with limited supervision-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process-Overtime is typically voluntary. However, during busy production periods overtime will be required-Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Requires passing a pre-employment screening, which includes a drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This person will engage in the assembling of parts or assemblies into units by interpreting specifications, blueprints, and job orders.Responsibilities:This person will also engage in foaming and tend to machine that sprays resins and foaming materials. This person will also work on duties as assigned by the supervisor or lead person.Working hours: 5:00 AM - 3:15 PMSkills:The ideal candidate will have the following:-The foamer is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.-The foamer must be able to work in repetitive motion with hands, wrist, shoulders, etc. -The foamer must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus-Must be able to work responsibly with limited supervision-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process-Overtime is typically voluntary. However, during busy production periods overtime will be required-Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Requires passing a pre-employment screening, which includes a drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 5:00 AM - 3:15 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 5:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 5:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 6:00 AM - 2:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 5:00 AM - 3:15 PM
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 5:00 AM - 3:15 PMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Experience is a factory setting-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRegularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.Requires passing pre-employment screening, including a drug screen Call to Action: Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 5:00 AM - 3:15 PMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Experience is a factory setting-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRegularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.Requires passing pre-employment screening, including a drug screen Call to Action: Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 8:00 AM - 4:30 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities: Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications: Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS: The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates! HRA 100% Employer Contribution, helps pay medical deductible! Free Clinic For covered employees and their dependents! Long Term Disability & Life Insurance 100% Employer Paid! Personal Time Off - Vacation and Sick Time Tuition Reimbursement Up to $4,000 per year! Wellness Programs, Employee Assistance Programs, We Care Program, and more. Paid Holidays Eligible on 1st day of employment! 401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee. Profit Sharing Share the companys profit! Clean and safe work environment. (MNSHARP Approved Worksites) Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities: Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications: Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS: The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates! HRA 100% Employer Contribution, helps pay medical deductible! Free Clinic For covered employees and their dependents! Long Term Disability & Life Insurance 100% Employer Paid! Personal Time Off - Vacation and Sick Time Tuition Reimbursement Up to $4,000 per year! Wellness Programs, Employee Assistance Programs, We Care Program, and more. Paid Holidays Eligible on 1st day of employment! 401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee. Profit Sharing Share the companys profit! Clean and safe work environment. (MNSHARP Approved Worksites) Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 3:00 PM - 1:15 AM
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 3:00 PM - 1:15 AMSkills:Skills: Reliable and dependabilityEducation:High SchoolExperience:0-1 yearsQualifications:QualificationsHigh School Diploma or equivalentRequired to pass a pre-employment Drug Screen and Background. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 3:00 PM - 1:15 AMSkills:Skills: Reliable and dependabilityEducation:High SchoolExperience:0-1 yearsQualifications:QualificationsHigh School Diploma or equivalentRequired to pass a pre-employment Drug Screen and Background. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 6:00 AM - 3:10 PM
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:?Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 6:00 AM - 3:10 PMSkills:Reliable and dependabilityEducation:High SchoolExperience:0-1 yearsQualifications:?High School Diploma or equivalent?Required to pass a pre-employment Drug Screen and Background. Get your foot in the door at this amazing company! Apply NOW! DIRECT HIRE position with an Employee Owned Company that takes great care of their employees, and has much growth opportunity! The Benefit Package is OUTSTANDING! Medical, HRA with 100% Employer Contribution, FREE CLINIC, L/T & S/Term Disability & Life Insurance, PTO, Tuition Reimbursement, 401K and ESOP, and so much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:?Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 6:00 AM - 3:10 PMSkills:Reliable and dependabilityEducation:High SchoolExperience:0-1 yearsQualifications:?High School Diploma or equivalent?Required to pass a pre-employment Drug Screen and Background. Get your foot in the door at this amazing company! Apply NOW! DIRECT HIRE position with an Employee Owned Company that takes great care of their employees, and has much growth opportunity! The Benefit Package is OUTSTANDING! Medical, HRA with 100% Employer Contribution, FREE CLINIC, L/T & S/Term Disability & Life Insurance, PTO, Tuition Reimbursement, 401K and ESOP, and so much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 3:00 PM - 11:00 PM
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:00 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:00 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 3:00 PM - 1:15 AM
      This person will engage in the assembling of parts or assemblies into units by interpreting specifications, blueprints, and job orders.Responsibilities:This person will also engage in foaming and tend to machine that sprays resins and foaming materials. This person will also work on duties as assigned by the supervisor or lead person.Working hours: 3:00 PM - 1:15 AMSkills:The ideal candidate will have the following:-The foamer is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.-The foamer must be able to work in repetitive motion with hands, wrist, shoulders, etc. -The foamer must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus-Must be able to work responsibly with limited supervision-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process-Overtime is typically voluntary. However, during busy production periods overtime will be required-Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Requires passing a pre-employment screening, which includes a drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This person will engage in the assembling of parts or assemblies into units by interpreting specifications, blueprints, and job orders.Responsibilities:This person will also engage in foaming and tend to machine that sprays resins and foaming materials. This person will also work on duties as assigned by the supervisor or lead person.Working hours: 3:00 PM - 1:15 AMSkills:The ideal candidate will have the following:-The foamer is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.-The foamer must be able to work in repetitive motion with hands, wrist, shoulders, etc. -The foamer must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus-Must be able to work responsibly with limited supervision-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process-Overtime is typically voluntary. However, during busy production periods overtime will be required-Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Requires passing a pre-employment screening, which includes a drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $40,000 - $50,000 per year
      • 8:00 AM - 5:00 PM
      Logistics Coordinator (Import/Export Shipments and Inventory) for a company that specializes in providing customized ingredient systems. They offer Nutrient Premixes and Spray-dried formulations for the Fortification of food, as well as innovative Antioxidant Systems for the protection of recipes in human nutrition, animal nutrition, and personal care.Responsibilities:-Answer incoming calls, greet clients at the door, and other general clerical duties.-Assess and resolve issues relating to transportation, customer inquiries, import and export, and inventory. -Manage customer PO?s and input into ERP system (Quickbooks)-Create Customs paperwork for export shipments.-Work with customers, suppliers and freight companies to arrange for shipment/delivery.-Obtain and send appropriate paperwork with each shipment via driver and via email direct to the customer.-Create daily UPS, DHL, FedEx shipments with correct packaging, labeling and paperwork.-Obtain samples per customer request and ship in a timely manner, communicating tracking info with the customer.-Run daily shipping reports and update Quality and Shipping department on any changes.-Calculate daily production reconciliations, build assemblies for finished goods and adjust raw material and finished goods inventories accordingly.-Will be cross trained to fill in as needed for other office personnel.Working hours: 8:00 AM - 5:00 PMSkills:--Effective Communication (English), including written, verbal, and interpersonal communication.--Quick critical thinking and problem-solving skills--Excellent customer service/relations skills--Organization and time management skills--Ability to work in a fast paced, ever changing Team environment.--Proficient in MS Office tools including, Excel, Word, Power Point, Teams and Outlook.Education:No Degree RequiredExperience:1-4 yearsQualifications:-Required experience with IMPORT/EXPORT shipments and associated paperwork.-Required Inventory management skills-Experience with shipping Hazardous goods a plus -Experience with Quickbooks a plus This company has corporate backing that continually invests in growth and state of the art equipment?.but a ?locally owned family atmosphere? that cares about their employees. Where you?re not just a number, you?re part of the family. This is a Direct Hire position with an impressive Benefits Package including great Family Health Insurance that is paid 70% by the company for the employee, 100% for Spouse, and 70% for children. 100% Dental, ST/LT Disability, Company Match 401K, PTO and much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Logistics Coordinator (Import/Export Shipments and Inventory) for a company that specializes in providing customized ingredient systems. They offer Nutrient Premixes and Spray-dried formulations for the Fortification of food, as well as innovative Antioxidant Systems for the protection of recipes in human nutrition, animal nutrition, and personal care.Responsibilities:-Answer incoming calls, greet clients at the door, and other general clerical duties.-Assess and resolve issues relating to transportation, customer inquiries, import and export, and inventory. -Manage customer PO?s and input into ERP system (Quickbooks)-Create Customs paperwork for export shipments.-Work with customers, suppliers and freight companies to arrange for shipment/delivery.-Obtain and send appropriate paperwork with each shipment via driver and via email direct to the customer.-Create daily UPS, DHL, FedEx shipments with correct packaging, labeling and paperwork.-Obtain samples per customer request and ship in a timely manner, communicating tracking info with the customer.-Run daily shipping reports and update Quality and Shipping department on any changes.-Calculate daily production reconciliations, build assemblies for finished goods and adjust raw material and finished goods inventories accordingly.-Will be cross trained to fill in as needed for other office personnel.Working hours: 8:00 AM - 5:00 PMSkills:--Effective Communication (English), including written, verbal, and interpersonal communication.--Quick critical thinking and problem-solving skills--Excellent customer service/relations skills--Organization and time management skills--Ability to work in a fast paced, ever changing Team environment.--Proficient in MS Office tools including, Excel, Word, Power Point, Teams and Outlook.Education:No Degree RequiredExperience:1-4 yearsQualifications:-Required experience with IMPORT/EXPORT shipments and associated paperwork.-Required Inventory management skills-Experience with shipping Hazardous goods a plus -Experience with Quickbooks a plus This company has corporate backing that continually invests in growth and state of the art equipment?.but a ?locally owned family atmosphere? that cares about their employees. Where you?re not just a number, you?re part of the family. This is a Direct Hire position with an impressive Benefits Package including great Family Health Insurance that is paid 70% by the company for the employee, 100% for Spouse, and 70% for children. 100% Dental, ST/LT Disability, Company Match 401K, PTO and much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 2:00 PM - 10:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Other duties as assignedWorking hours: 2:00 PM - 10:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:Required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesPHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands or fingers, and talk and hear, reach, bend, stoop, stand for long periods of time, reach over head, and lifting up to 50 lbs. ** DIRECT HIRE ** Great Benefits, Incl: Medical & Short-Term Disability- Low premium rates!HRA 100% Emplo
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Other duties as assignedWorking hours: 2:00 PM - 10:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:Required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesPHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands or fingers, and talk and hear, reach, bend, stoop, stand for long periods of time, reach over head, and lifting up to 50 lbs. ** DIRECT HIRE ** Great Benefits, Incl: Medical & Short-Term Disability- Low premium rates!HRA 100% Emplo
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:30 PM
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 9:00 PM - 6:25 AM
      Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 9:00 PM - 6:25 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.50, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 9:00 PM - 6:25 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.50, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $20.00 per hour
      • 6:00 AM - 2:30 PM
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 6:00 AM - 2:30 PMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Qualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screenCall to Action:Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 6:00 AM - 2:30 PMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Qualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screenCall to Action:Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 11:00 PM - 7:30 AM
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:MastersExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:MastersExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 7:00 AM - 4:00 PM
      The purpose of this position is to ensure work site set up, performs basic to routine window, door and gutter installations and removal, performs work site tear down and clean up of the entire job site in accordance with guidelines.Responsibilities:Duties/Responsibilities:Effectively prepares the job site for set up and tear downInstalls products in accordance with Home Solutions standards and processes Collaborates with the Lead Installer to provide Signature Service on each job sitePlans continual self-learning and development of skillsAssists in meeting or exceeding customer satisfaction and revenue dollars per periodAdheres to proper safety techniquesBuilds and sustains positive relationships with coworkers and customersDemonstrates self-leadership and personal accountabilityDemonstrates responsible attendance, punctuality and work place flexibilityContinually improves processesPerforms other duties as assigned.Working hours: 7:00 AM - 4:00 PMSkills:-Must have a valid driver?s license-Able to communicate with peers and homeowners-Able to organize tasks and jobs requirements-Proficient in the use of tools and equipmentEducation:MastersExperience:0-1 yearsQualifications:High school diploma or equivalent combination of education and experienceTrade school diploma/certificate desiredTwo years general carpentry experience desiredPhysical Requirements: Constantly positions self to remove/install products at various levelsOccasionally ascends/descends a ladder to install productsOccasionally moves windows/doors and equipment weighing up to 75 pounds Occasionally operates power toolsConstantly works in outdoor weather conditions Work for a wonderful locally owned business continually expanding! Direct Hire positionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The purpose of this position is to ensure work site set up, performs basic to routine window, door and gutter installations and removal, performs work site tear down and clean up of the entire job site in accordance with guidelines.Responsibilities:Duties/Responsibilities:Effectively prepares the job site for set up and tear downInstalls products in accordance with Home Solutions standards and processes Collaborates with the Lead Installer to provide Signature Service on each job sitePlans continual self-learning and development of skillsAssists in meeting or exceeding customer satisfaction and revenue dollars per periodAdheres to proper safety techniquesBuilds and sustains positive relationships with coworkers and customersDemonstrates self-leadership and personal accountabilityDemonstrates responsible attendance, punctuality and work place flexibilityContinually improves processesPerforms other duties as assigned.Working hours: 7:00 AM - 4:00 PMSkills:-Must have a valid driver?s license-Able to communicate with peers and homeowners-Able to organize tasks and jobs requirements-Proficient in the use of tools and equipmentEducation:MastersExperience:0-1 yearsQualifications:High school diploma or equivalent combination of education and experienceTrade school diploma/certificate desiredTwo years general carpentry experience desiredPhysical Requirements: Constantly positions self to remove/install products at various levelsOccasionally ascends/descends a ladder to install productsOccasionally moves windows/doors and equipment weighing up to 75 pounds Occasionally operates power toolsConstantly works in outdoor weather conditions Work for a wonderful locally owned business continually expanding! Direct Hire positionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $14.00 - $17.00 per hour
      • 7:00 AM - 4:00 PM
      The purpose of this position is to proficiently and precisely stain wood for window and door projects. Work is performed indoors in a controlled temperature environment. Additional duties as assigned to complete projects.Responsibilities:Effectively sanding, prepping, staining, seal and top coating Assemble and dissemble windows and doors to complete stain process Load and unload windows and doors Measure and cut wood to specifics for jobsWorking hours: 7:00 AM - 4:00 PMSkills:Must have a valid drivers license Attention to detail and time management skills Able to organize tasks and jobs requirements Proficient in stainingEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalent combination of education and experience Wood staining experience preferredPhysical Requirements: Occasionally ascends/descends a ladder Occasionally moves windows/doors and equipment weighing up to 75 pounds Occasionally operates power tools Constantly works indoors Direct Hire positions with a great company continually expanding! Work indors in a temperature controlled environment!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The purpose of this position is to proficiently and precisely stain wood for window and door projects. Work is performed indoors in a controlled temperature environment. Additional duties as assigned to complete projects.Responsibilities:Effectively sanding, prepping, staining, seal and top coating Assemble and dissemble windows and doors to complete stain process Load and unload windows and doors Measure and cut wood to specifics for jobsWorking hours: 7:00 AM - 4:00 PMSkills:Must have a valid drivers license Attention to detail and time management skills Able to organize tasks and jobs requirements Proficient in stainingEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalent combination of education and experience Wood staining experience preferredPhysical Requirements: Occasionally ascends/descends a ladder Occasionally moves windows/doors and equipment weighing up to 75 pounds Occasionally operates power tools Constantly works indoors Direct Hire positions with a great company continually expanding! Work indors in a temperature controlled environment!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 11:00 PM - 7:30 AM
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $17.50 - $19.00 per hour
      • 6:30 AM - 4:00 PM
      Laborers assist welders in all aspects of fabrication and assembly in shop and field site work areas. And assist painters and bead blasters in prepping/coating projects.Responsibilities:Operate all hand/automated tools including tape measure, steel square, wrenches, ratchets, grinders, chop saws, come-a-longs, jacks, chain hoists, clamps, welding dogs & pad-eyes, etc.Lay out, position, and secure parts and assemblies using hoists, pry bars, wrenches, hammer, and wedges as directed.Remove rough spots, slag, etc. from work piece, using portable grinder, wire brush, hand file, bench grinder, wire wheel, etc.Lift, move, transport steel parts using hydraulic lifts, plate clamps, chain hoists, dollies and hand carts.Observe and follows all company safety rules and regulations.Clean and maintain an orderly work area.Work well with others to ensure quality of work while maintaining scheduling demands.Performs other miscellaneous tasks as directed by management.Working hours: 6:30 AM - 4:00 PMSkills:Ability to communicate both verbally as well as through written communication.Reliable and punctual.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to lift 50 pounds.Must possess adequate sight, hearing and use of limbs for all aspects of job.Able to work for periods of time while kneeling, crouching, crawling, climbing steps as well as the ability to work from a ladder.Ability to pass a drug and alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant Company 30%, empl 70%. To offset the deductible?company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Laborers assist welders in all aspects of fabrication and assembly in shop and field site work areas. And assist painters and bead blasters in prepping/coating projects.Responsibilities:Operate all hand/automated tools including tape measure, steel square, wrenches, ratchets, grinders, chop saws, come-a-longs, jacks, chain hoists, clamps, welding dogs & pad-eyes, etc.Lay out, position, and secure parts and assemblies using hoists, pry bars, wrenches, hammer, and wedges as directed.Remove rough spots, slag, etc. from work piece, using portable grinder, wire brush, hand file, bench grinder, wire wheel, etc.Lift, move, transport steel parts using hydraulic lifts, plate clamps, chain hoists, dollies and hand carts.Observe and follows all company safety rules and regulations.Clean and maintain an orderly work area.Work well with others to ensure quality of work while maintaining scheduling demands.Performs other miscellaneous tasks as directed by management.Working hours: 6:30 AM - 4:00 PMSkills:Ability to communicate both verbally as well as through written communication.Reliable and punctual.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to lift 50 pounds.Must possess adequate sight, hearing and use of limbs for all aspects of job.Able to work for periods of time while kneeling, crouching, crawling, climbing steps as well as the ability to work from a ladder.Ability to pass a drug and alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant Company 30%, empl 70%. To offset the deductible?company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 43 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.