Thank you for subscribing to your personalized job alerts.

    24 jobs found for 1st shift in Minnesota

    Filter3
    Clear all
      • Owatonna, Minnesota
      • Permanent
      • $22.50 - $26.50 per hour
      • 7:00 AM - 3:00 PM
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years??? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. APPLY & SHOW US WHAT YOUR MADE OF!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years??? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. APPLY & SHOW US WHAT YOUR MADE OF!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Blooming Prairie, Minnesota
      • Permanent
      • $60,000 - $65,000 per year
      • 7:00 AM - 4:00 PM
      The Tooling Engineer is responsible for the research, design, development, build, validation, and implementation of tooling for new and existing products, manufacturing, and production processes. This position reports to the Plant Manager. A typical day for a Tooling Engineer will consist of a daily conference call about new and existing sales quotations. During this time ECO?s will be reviewed and action plans completed. Afterwards, a discussion with the tooling team will be conducted for evaluation of work duties and deployment of your team. The tooling team keeps our lines producing quality parts efficiently and fast. Your skills with CAD and Solid Works will allow you to draw up plans and solicit quotations for new or improved tooling concepts. Every day provides for a new challenge. Longer term projects will include organization, validation, and improvement to the tooling warehouse. A comprehensive tooling strategy should develop by the end of your first year. This position will be an excellent opportunity for someone wanting challenge and growth with a stellar local company.Responsibilities:Support open cast molding process by assisting in the design, fabrication, validation and repair and maintenance of tooling through the coordination of any outside vendors or internal resources.Develop and manage the production tooling standards as needed.Develop and rate tooling suppliers for quality, delivery, competitive price, and location.Develop preventative maintenance programs, advising on spare parts inventory, and coordinating the repair and servicing of tooling.Active member of the Engineering Team (cross functional group that addresses any design, quality or manufacturing concerns/needs before production starts).Ensure necessary documentation is updated for ongoing engineering changes related to tooling.Manage continuous improvement of existing molding programs to increase profitability, reduce scrap, reduce waste, and downtime reduction.Work with internal and external resources to resolve product or production issues.Lead or assist in corrective or preventive action root cause analysis, implementation, and verification.Manage a dynamic 3-5 person team.Able to work independently and handle multiple priorities.Accepts other duties and assumes other responsibilities as assigned or as need becomes apparent.Working hours: 7:00 AM - 4:00 PMSkills:-Ability to conduct in-dept research and present specific reasoning of recommendations.-Ability to develop project plans, coordinate projects, communicate changes and progress and complete projects on time and on budget.-Mechanically inclined.-Experience in open cast urethane process is preferred.-Good working knowledge of tool room equipment processes, tool design, CAD and SolidWorks?, geometric dimensioning and tolerancing.-Solid communication and organizational skills and ability to work with others to get resultsEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors Degree in Engineering or other Technical Degree, and three years? experience, or equivalent experience, and skill set. Extensive computer skills, including Microsoft Office products.Solid technical, analytical, systematic, and detail-oriented thinking skills. *DIRECT HIRE POSITION!* Benefits Include: Health Insurance, Dental, Vision, PTO, 401K, and more.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Tooling Engineer is responsible for the research, design, development, build, validation, and implementation of tooling for new and existing products, manufacturing, and production processes. This position reports to the Plant Manager. A typical day for a Tooling Engineer will consist of a daily conference call about new and existing sales quotations. During this time ECO?s will be reviewed and action plans completed. Afterwards, a discussion with the tooling team will be conducted for evaluation of work duties and deployment of your team. The tooling team keeps our lines producing quality parts efficiently and fast. Your skills with CAD and Solid Works will allow you to draw up plans and solicit quotations for new or improved tooling concepts. Every day provides for a new challenge. Longer term projects will include organization, validation, and improvement to the tooling warehouse. A comprehensive tooling strategy should develop by the end of your first year. This position will be an excellent opportunity for someone wanting challenge and growth with a stellar local company.Responsibilities:Support open cast molding process by assisting in the design, fabrication, validation and repair and maintenance of tooling through the coordination of any outside vendors or internal resources.Develop and manage the production tooling standards as needed.Develop and rate tooling suppliers for quality, delivery, competitive price, and location.Develop preventative maintenance programs, advising on spare parts inventory, and coordinating the repair and servicing of tooling.Active member of the Engineering Team (cross functional group that addresses any design, quality or manufacturing concerns/needs before production starts).Ensure necessary documentation is updated for ongoing engineering changes related to tooling.Manage continuous improvement of existing molding programs to increase profitability, reduce scrap, reduce waste, and downtime reduction.Work with internal and external resources to resolve product or production issues.Lead or assist in corrective or preventive action root cause analysis, implementation, and verification.Manage a dynamic 3-5 person team.Able to work independently and handle multiple priorities.Accepts other duties and assumes other responsibilities as assigned or as need becomes apparent.Working hours: 7:00 AM - 4:00 PMSkills:-Ability to conduct in-dept research and present specific reasoning of recommendations.-Ability to develop project plans, coordinate projects, communicate changes and progress and complete projects on time and on budget.-Mechanically inclined.-Experience in open cast urethane process is preferred.-Good working knowledge of tool room equipment processes, tool design, CAD and SolidWorks?, geometric dimensioning and tolerancing.-Solid communication and organizational skills and ability to work with others to get resultsEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors Degree in Engineering or other Technical Degree, and three years? experience, or equivalent experience, and skill set. Extensive computer skills, including Microsoft Office products.Solid technical, analytical, systematic, and detail-oriented thinking skills. *DIRECT HIRE POSITION!* Benefits Include: Health Insurance, Dental, Vision, PTO, 401K, and more.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Dodge Center, Minnesota
      • Permanent
      • $15.50 - $17.00 per hour
      • 6:00 AM - 4:30 PM
      Performs a wide variety of tasks in support of manufacturing/production of concrete mixer and refuse truck parts and bodies. Responsible for preparing parts and equipment for paint including removing previously applied paint, cleaning, and degreasing, smoothing surfaces, and protecting unpainted surfaces by masking. These duties require strong attention to detail to adequately prepare the trucks for the next stage in the high-quality manufacturing process.Responsibilities:Wash, clean, and wipe down vehicles to be painted Remove and replace all components as required for painting and sanding Mask, paper, or grease components when appropriate Operate necessary equipment (dual action hand sander, electric lifts, etc.) Use basic hand tools and other small power tools associated with equipment and prep work prior to painting operations Perform minor bodywork and maintain condition of vehicle or component through the entire paint process Train and work in various areas of production in response to production demands Identification, safe handling, and appropriate disposal of materials Follow verbal and written work instructions Attention to detail necessary to adhere to quality standards Maintain a safe and clean work environment by complying with procedures, rules, and regulations Regular attendance required All other duties and responsibilities that are assigned Per 40 CFR 265.16(d)(1-3) - This position requires initial training within 6 months and annual thereafter as a hazardous waste handler as required by the EPA RCRA hazardous waste rules. Responsible for and trained to understand waste hazards, storage time limits, satellite accumulation, marking, labeling, weekly inspections, aisle space, storage, manifest shipping, use and location of emergency equipment, response to spills and fires, evacuation routes, etc.Working hours: 6:00 AM - 4:30 PMSkills:One (1) year of applicable position experienceEnjoys working in a team environmentExperience using hand toolsEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDFollows all safety and compliance regulations APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Performs a wide variety of tasks in support of manufacturing/production of concrete mixer and refuse truck parts and bodies. Responsible for preparing parts and equipment for paint including removing previously applied paint, cleaning, and degreasing, smoothing surfaces, and protecting unpainted surfaces by masking. These duties require strong attention to detail to adequately prepare the trucks for the next stage in the high-quality manufacturing process.Responsibilities:Wash, clean, and wipe down vehicles to be painted Remove and replace all components as required for painting and sanding Mask, paper, or grease components when appropriate Operate necessary equipment (dual action hand sander, electric lifts, etc.) Use basic hand tools and other small power tools associated with equipment and prep work prior to painting operations Perform minor bodywork and maintain condition of vehicle or component through the entire paint process Train and work in various areas of production in response to production demands Identification, safe handling, and appropriate disposal of materials Follow verbal and written work instructions Attention to detail necessary to adhere to quality standards Maintain a safe and clean work environment by complying with procedures, rules, and regulations Regular attendance required All other duties and responsibilities that are assigned Per 40 CFR 265.16(d)(1-3) - This position requires initial training within 6 months and annual thereafter as a hazardous waste handler as required by the EPA RCRA hazardous waste rules. Responsible for and trained to understand waste hazards, storage time limits, satellite accumulation, marking, labeling, weekly inspections, aisle space, storage, manifest shipping, use and location of emergency equipment, response to spills and fires, evacuation routes, etc.Working hours: 6:00 AM - 4:30 PMSkills:One (1) year of applicable position experienceEnjoys working in a team environmentExperience using hand toolsEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDFollows all safety and compliance regulations APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Dodge Center, Minnesota
      • Permanent
      • $17.50 - $19.00 per hour
      • 6:00 AM - 4:30 PM
      JOB SUMMARY: Responsible for the application of paint and other coatings using electrostatic / air assist paint guns and other automotive type paint application devices on Company products including military spec paint. This position has the knowledge and skills to perform in any and each area of the paint process.Responsibilities:These duties are not meant to be all-inclusive and other duties may be assigned.Prime, paint, and touchup vehicles with power spray equipment and brushes. Flush tanks, hoses, and guns prior to color changeovers. Mix all types of paints for proper color, formula, conditions, viscosity, and consistency. Perform titrations and mix or adjust chemicals as neededMaintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards. Demonstrate best practices to follow all safe procedures in assembling and testing of all models/products in assigned job functionUpkeep of work area and equipment which may include preventative maintenance tasks. Inspect product before, during, after paint process to ensure specifications are being met.Sand, wash, and condition parts as necessary. Light bodywork may be required.Inspection of completed parts for quality, validate components meetTeam member has the knowledge and skills to perform in every area of the paint process. Assist training new team members on processes and equipment functionsAny other tasks assigned by Supervisor to meet company needs Ability to start training to perform touch-up.Disassemble, clean, repair, adjust and reassemble painting equipment, such as pumps, paint heaters, tanks, spray guns, etc. for proper operation (Repairs are only required in Dodge Center)Apply decals, stencils, and rust-proofing as required (Dodge Center only)Working hours: 6:00 AM - 4:30 PMSkills:Automotive paint experienceManufacturing parts painting experienceWillingness to train in multiple areas to obtain a Painter ll levelEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDSix (6) months of industrial painting experience or completion of internal paint training programMust be able to read checklists, paint codes, Safety logs, JSA's, SWI's etc.Able to proficiently paint in single assigned area Must be able to perform mill checks and readings and help with paint prep (Riceville only)Able to perform fine line painting technique (Riceville only) APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      JOB SUMMARY: Responsible for the application of paint and other coatings using electrostatic / air assist paint guns and other automotive type paint application devices on Company products including military spec paint. This position has the knowledge and skills to perform in any and each area of the paint process.Responsibilities:These duties are not meant to be all-inclusive and other duties may be assigned.Prime, paint, and touchup vehicles with power spray equipment and brushes. Flush tanks, hoses, and guns prior to color changeovers. Mix all types of paints for proper color, formula, conditions, viscosity, and consistency. Perform titrations and mix or adjust chemicals as neededMaintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards. Demonstrate best practices to follow all safe procedures in assembling and testing of all models/products in assigned job functionUpkeep of work area and equipment which may include preventative maintenance tasks. Inspect product before, during, after paint process to ensure specifications are being met.Sand, wash, and condition parts as necessary. Light bodywork may be required.Inspection of completed parts for quality, validate components meetTeam member has the knowledge and skills to perform in every area of the paint process. Assist training new team members on processes and equipment functionsAny other tasks assigned by Supervisor to meet company needs Ability to start training to perform touch-up.Disassemble, clean, repair, adjust and reassemble painting equipment, such as pumps, paint heaters, tanks, spray guns, etc. for proper operation (Repairs are only required in Dodge Center)Apply decals, stencils, and rust-proofing as required (Dodge Center only)Working hours: 6:00 AM - 4:30 PMSkills:Automotive paint experienceManufacturing parts painting experienceWillingness to train in multiple areas to obtain a Painter ll levelEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDSix (6) months of industrial painting experience or completion of internal paint training programMust be able to read checklists, paint codes, Safety logs, JSA's, SWI's etc.Able to proficiently paint in single assigned area Must be able to perform mill checks and readings and help with paint prep (Riceville only)Able to perform fine line painting technique (Riceville only) APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Dodge Center, Minnesota
      • Permanent
      • $15.50 - $17.00 per hour
      • 6:00 AM - 4:30 PM
      The Materials Handler is responsible for supporting internal and external customers through accurate receiving, stocking, delivery, and shipment of materials. In addition, the Materials Handler responsible for operating all material support equipment and performing all material support functions (i.e. receiving, running lines, and shipping) in assigned Operations facility.Responsibilities:These duties are not meant to be all-inclusive and other duties may be assigned.Efficiently locate & pull materials/supplies as listed on production/sales order and stock assigned production areas to maintain inventory levels for production; ability to accurately verify parts & quantities and complete BOLs to receive and/or ship material.Licensed and can operate all material handling equipment (i.e. Stand-up, Sit-down, Combi, Lancer, Tugger) at assigned Operations facility. Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards; use best practices to follow all safe procedures in operation of various material support equipment in assigned Operations facility.Maintain a safe and clean work environment by complying with procedures, rules, and proper 6S standards; follow all safe procedures and practices in assembling and testing of all models in your job function.Working hours: 6:00 AM - 4:30 PMSkills:Six (6) months of applicable position experienceExperience using warehouse technology or electronicsExperience with ship confirmingEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDPrevious experience directly working with material handling equipment (forklift, tugger, etc.), inventory management in a warehouse or manufacturing environment Ability to become forklift certified to operate a forklift/tugger to receive and deliver parts safely and efficiently Basic computer skillsAbility to multi-task and adapt to an ever-changing environment and processes APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Materials Handler is responsible for supporting internal and external customers through accurate receiving, stocking, delivery, and shipment of materials. In addition, the Materials Handler responsible for operating all material support equipment and performing all material support functions (i.e. receiving, running lines, and shipping) in assigned Operations facility.Responsibilities:These duties are not meant to be all-inclusive and other duties may be assigned.Efficiently locate & pull materials/supplies as listed on production/sales order and stock assigned production areas to maintain inventory levels for production; ability to accurately verify parts & quantities and complete BOLs to receive and/or ship material.Licensed and can operate all material handling equipment (i.e. Stand-up, Sit-down, Combi, Lancer, Tugger) at assigned Operations facility. Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards; use best practices to follow all safe procedures in operation of various material support equipment in assigned Operations facility.Maintain a safe and clean work environment by complying with procedures, rules, and proper 6S standards; follow all safe procedures and practices in assembling and testing of all models in your job function.Working hours: 6:00 AM - 4:30 PMSkills:Six (6) months of applicable position experienceExperience using warehouse technology or electronicsExperience with ship confirmingEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDPrevious experience directly working with material handling equipment (forklift, tugger, etc.), inventory management in a warehouse or manufacturing environment Ability to become forklift certified to operate a forklift/tugger to receive and deliver parts safely and efficiently Basic computer skillsAbility to multi-task and adapt to an ever-changing environment and processes APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 5:00 AM - 3:15 PM
      This person will engage in the assembling of parts or assemblies into units by interpreting specifications, blueprints, and job orders.Responsibilities:This person will also engage in foaming and tend to machine that sprays resins and foaming materials. This person will also work on duties as assigned by the supervisor or lead person.Working hours: 5:00 AM - 3:15 PMSkills:The ideal candidate will have the following:-The foamer is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.-The foamer must be able to work in repetitive motion with hands, wrist, shoulders, etc. -The foamer must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus-Must be able to work responsibly with limited supervision-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process-Overtime is typically voluntary. However, during busy production periods overtime will be required-Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Requires passing a pre-employment screening, which includes a drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This person will engage in the assembling of parts or assemblies into units by interpreting specifications, blueprints, and job orders.Responsibilities:This person will also engage in foaming and tend to machine that sprays resins and foaming materials. This person will also work on duties as assigned by the supervisor or lead person.Working hours: 5:00 AM - 3:15 PMSkills:The ideal candidate will have the following:-The foamer is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.-The foamer must be able to work in repetitive motion with hands, wrist, shoulders, etc. -The foamer must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus-Must be able to work responsibly with limited supervision-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process-Overtime is typically voluntary. However, during busy production periods overtime will be required-Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Requires passing a pre-employment screening, which includes a drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:30 PM
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:30 PM
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.50 - $40.50 per hour
      • 7:00 AM - 3:00 PM
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! JOBS ARE DISAPPEARING FAST.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! JOBS ARE DISAPPEARING FAST.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:CLASSIFICATIONS:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 7:00 AM - 3:15 PMSkills:-Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.-Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.-Fabricate components from blueprints and verbal instructions.-Perform assignments in accordance with written quality procedures.-Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.-Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! Medical & ST DisabilityHRA ? 100% Employer Contribution, helps pay medical deductibleFree Clinic ? For employees and dependentsLT Disability & Life Insurance ? 100% Employer Pai
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:CLASSIFICATIONS:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 7:00 AM - 3:15 PMSkills:-Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.-Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.-Fabricate components from blueprints and verbal instructions.-Perform assignments in accordance with written quality procedures.-Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.-Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! Medical & ST DisabilityHRA ? 100% Employer Contribution, helps pay medical deductibleFree Clinic ? For employees and dependentsLT Disability & Life Insurance ? 100% Employer Pai
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 4:00 AM - 3:15 PM
      This person will engage in a variety of tasks in the Assembly CellResponsibilities:TIG welding and gas soldering. Will perform quality check of parts and adjust as required. Additional duties as assigned by the supervisor or lead.Working hours: 4:00 AM - 3:15 PMSkills:1.-Must have some welding experience. 2.-Must be detail oriented, self-motivated, and able to keep area clean and organized. 3.-Must be able to retain training information.Education:High SchoolExperience:0-1 yearsQualifications:1High-School Diploma or equivalent and be at least 18 years of age.2Required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.3Must be able to work responsibly with limited supervision4Must be capable of lifting and moving up to 30 pounds; frequently lift and move up to 15 pounds5Requires a pre-employment screening, which includes a drug screen. Call to Action: Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This person will engage in a variety of tasks in the Assembly CellResponsibilities:TIG welding and gas soldering. Will perform quality check of parts and adjust as required. Additional duties as assigned by the supervisor or lead.Working hours: 4:00 AM - 3:15 PMSkills:1.-Must have some welding experience. 2.-Must be detail oriented, self-motivated, and able to keep area clean and organized. 3.-Must be able to retain training information.Education:High SchoolExperience:0-1 yearsQualifications:1High-School Diploma or equivalent and be at least 18 years of age.2Required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.3Must be able to work responsibly with limited supervision4Must be capable of lifting and moving up to 30 pounds; frequently lift and move up to 15 pounds5Requires a pre-employment screening, which includes a drug screen. Call to Action: Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.50 - $19.50 per hour
      • 7:00 AM - 3:00 PM
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $16.00 - $18.00 per hour
      • 6:00 AM - 2:30 PM
      We are looking for innovative, positive, and team-oriented individuals who are willing to learn new skills and want to make an impact in a rapidly growing organization. We are a wire and cable assembly manufacturer that serves many different industries, including Power Generation, Medical, and the Recreational Vehicle market to name a few. COMPETITIVE STARTING WAGE OF $16.00-$18/hrResponsibilities:???General cable assembly. ???Responsible for soldering, crimping, harnessing, and panel assembly. ???Perform quality assurance checks designated for each job, function or assignment. ???Ability to cross-train to fill-in on other production lines or departments, as needed. ???Maintains good housekeeping and clean work areas in assigned work sites. ???Ability to meet production standards on specific assignments.Working hours: 6:00 AM - 2:30 PMSkills:--Ability to clearly understand verbal and written instructions and drawings. --Good vision and finger dexterity. --Good employment history. --Desire to be a team player. --Enjoy having fun!Education:High SchoolExperience:0-1 yearsQualifications:PREFERRED EXPERIENCE ???Hand crimping ???One to two years of preparing wires and components for harnessing, soldering, and distribution. ???Experience/Ability to read prints ???Terminal Press Operation PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is required to frequently stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; crouch; talk or hear. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. EDUCATION ???High school diploma or equivalent. First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.Flexible part time hours available! Hiring for both FT and PT hours!M-FRI: 6:00 AM - 2:30 PMFT: 40 hrs.per wk.PT: 15-20 hrs. per wk. Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits available for full time employees.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for innovative, positive, and team-oriented individuals who are willing to learn new skills and want to make an impact in a rapidly growing organization. We are a wire and cable assembly manufacturer that serves many different industries, including Power Generation, Medical, and the Recreational Vehicle market to name a few. COMPETITIVE STARTING WAGE OF $16.00-$18/hrResponsibilities:???General cable assembly. ???Responsible for soldering, crimping, harnessing, and panel assembly. ???Perform quality assurance checks designated for each job, function or assignment. ???Ability to cross-train to fill-in on other production lines or departments, as needed. ???Maintains good housekeeping and clean work areas in assigned work sites. ???Ability to meet production standards on specific assignments.Working hours: 6:00 AM - 2:30 PMSkills:--Ability to clearly understand verbal and written instructions and drawings. --Good vision and finger dexterity. --Good employment history. --Desire to be a team player. --Enjoy having fun!Education:High SchoolExperience:0-1 yearsQualifications:PREFERRED EXPERIENCE ???Hand crimping ???One to two years of preparing wires and components for harnessing, soldering, and distribution. ???Experience/Ability to read prints ???Terminal Press Operation PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is required to frequently stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; crouch; talk or hear. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. EDUCATION ???High school diploma or equivalent. First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.Flexible part time hours available! Hiring for both FT and PT hours!M-FRI: 6:00 AM - 2:30 PMFT: 40 hrs.per wk.PT: 15-20 hrs. per wk. Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits available for full time employees.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hayward, Minnesota
      • Permanent
      • $17.00 - $25.00 per hour
      • 7:00 AM - 4:15 PM
      This position designs and develops new models, mechanisms, devices, machinery, or adaptations for products under the direction of a Product Engineer. Responsible for correct proportions, consideration of stress, speed, motion, weight, operational details, customer specifications, and the incorporation of usable parts that may be in production. Designs are to include appropriate dimensions, tolerances, fasteners, and joining requirements. Works with engineers to complete the design documentation package including BOM's and routings.Responsibilities:Performs complex engineering calculations using algebraic, trigonometric, and geometric formulas. Uses standard product engineering data to develop product configuration. Utilizes computer aided design techniques to perform applicable design work. May supervise experimental manufacture and testing of finished product. Acts as the design lead for major projects and may supervise the activities of other designers and drafters.OTHER DUTIESPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.Working hours: 7:00 AM - 4:15 PMSkills:-High mechanical aptitude-Organizational skills-Must be able to adapt to a physically demanding environment and maintain positive demeanor.Education:High SchoolExperience:1-4 yearsQualifications:High School Diploma or equivalentMust be 18 years of age or olderRequires a two-year technical degree/certification.Requires a high degree of technical knowledge and skill.Requires four years of experience in mechanical drafting and design.Must be able to adapt to a physically demanding environment and maintain positive demeanor. Requires passing a pre-employment screening and drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position designs and develops new models, mechanisms, devices, machinery, or adaptations for products under the direction of a Product Engineer. Responsible for correct proportions, consideration of stress, speed, motion, weight, operational details, customer specifications, and the incorporation of usable parts that may be in production. Designs are to include appropriate dimensions, tolerances, fasteners, and joining requirements. Works with engineers to complete the design documentation package including BOM's and routings.Responsibilities:Performs complex engineering calculations using algebraic, trigonometric, and geometric formulas. Uses standard product engineering data to develop product configuration. Utilizes computer aided design techniques to perform applicable design work. May supervise experimental manufacture and testing of finished product. Acts as the design lead for major projects and may supervise the activities of other designers and drafters.OTHER DUTIESPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.Working hours: 7:00 AM - 4:15 PMSkills:-High mechanical aptitude-Organizational skills-Must be able to adapt to a physically demanding environment and maintain positive demeanor.Education:High SchoolExperience:1-4 yearsQualifications:High School Diploma or equivalentMust be 18 years of age or olderRequires a two-year technical degree/certification.Requires a high degree of technical knowledge and skill.Requires four years of experience in mechanical drafting and design.Must be able to adapt to a physically demanding environment and maintain positive demeanor. Requires passing a pre-employment screening and drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • St Peter, Minnesota
      • Permanent
      • $17.00 - $19.60 per hour
      • 6:00 AM - 4:30 PM
      DIRECT HIRE ALERT!!! We have exciting news! Spherion Staffing has partnered with leading boat manufacturer, Alumacraft in St. Peter, and we are seeking dedicated Assemblers to join the Alumacraft family! These positions are long-term, DIRECT HIRE WITH GREAT PAY AND FULL BENEFITS. Hours for 1st shift are Monday - Thursday from 6:00 a.m. - 4:30 p.m. with OT on Fridays (as needed).Responsibilities:Installing interior boat components such as brackets etc., carpeting, gluing, sawing, filing, glue gun usage, stapling, vacuuming, and foaming gun use.Select and prepare components for boats, inspect quality of material prior to and following installation using tape measure, jigs, and gauges to insure proper fit and alignment of interior boat components.Inserting die corresponding to size of rivet head in hammer.Dressing triggers to pound and shape head on rivet shank.Drilling holes using air drill.Helps to physically move boat from station to station.May clean or align holes and make adjustments to fit parts.Able to work different stations to meet production needs.Working hours: 6:00 AM - 4:30 PMSkills:Ability to stand and work in various positions for several hours on concreteAbility to see and read complicated instructionsMust be accurate and detail orientated.Education:No Degree RequiredExperience:0-1 yearsQualifications:Strong attendance recordAbility to manually move product and materials up to 50 lbs. through regular physical exertion, including but not limited to climbing, lifting, carrying, pushing pulling and bending. DON'T WAIT, APPLY TODAY! Call Jennifer to schedule an immediate phone interview: 507-934-8259!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      DIRECT HIRE ALERT!!! We have exciting news! Spherion Staffing has partnered with leading boat manufacturer, Alumacraft in St. Peter, and we are seeking dedicated Assemblers to join the Alumacraft family! These positions are long-term, DIRECT HIRE WITH GREAT PAY AND FULL BENEFITS. Hours for 1st shift are Monday - Thursday from 6:00 a.m. - 4:30 p.m. with OT on Fridays (as needed).Responsibilities:Installing interior boat components such as brackets etc., carpeting, gluing, sawing, filing, glue gun usage, stapling, vacuuming, and foaming gun use.Select and prepare components for boats, inspect quality of material prior to and following installation using tape measure, jigs, and gauges to insure proper fit and alignment of interior boat components.Inserting die corresponding to size of rivet head in hammer.Dressing triggers to pound and shape head on rivet shank.Drilling holes using air drill.Helps to physically move boat from station to station.May clean or align holes and make adjustments to fit parts.Able to work different stations to meet production needs.Working hours: 6:00 AM - 4:30 PMSkills:Ability to stand and work in various positions for several hours on concreteAbility to see and read complicated instructionsMust be accurate and detail orientated.Education:No Degree RequiredExperience:0-1 yearsQualifications:Strong attendance recordAbility to manually move product and materials up to 50 lbs. through regular physical exertion, including but not limited to climbing, lifting, carrying, pushing pulling and bending. DON'T WAIT, APPLY TODAY! Call Jennifer to schedule an immediate phone interview: 507-934-8259!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $16.00 - $18.00 per hour
      • 6:00 AM - 2:30 PM
      We are looking for innovative, positive, and team-oriented individuals who are willing to learn new skills and want to make an impact in a rapidly growing organization. We are a wire and cable assembly manufacturer that serves many different industries, including Power Generation, Medical, and the Recreational Vehicle market to name a few. COMPETITIVE STARTING WAGE OF $16.00-$18/hrResponsibilities:General cable assembly. Responsible for soldering, crimping, harnessing, and panel assembly. Perform quality assurance checks designated for each job, function or assignment. Ability to cross-train to fill-in on other production lines or departments, as needed. Maintains good housekeeping and clean work areas in assigned work sites. Ability to meet production standards on specific assignments.Working hours: 6:00 AM - 2:30 PMSkills:-Ability to clearly understand verbal and written instructions and drawings. -Good vision and finger dexterity. -Good employment history. -Desire to be a team player. -Enjoy having fun!Education:High SchoolExperience:0-1 yearsQualifications:Hand crimping One to two years of preparing wires and components for harnessing, soldering, and distribution. Experience/Ability to read prints Terminal Press Operation PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is required to frequently stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; crouch; talk or hear. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. EDUCATION High school diploma or equivalent. First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.Flexible part time hours available! M-FRI: 6:00 AM - 2:30 PMFT: 40 hrs.per wk. 56001Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for innovative, positive, and team-oriented individuals who are willing to learn new skills and want to make an impact in a rapidly growing organization. We are a wire and cable assembly manufacturer that serves many different industries, including Power Generation, Medical, and the Recreational Vehicle market to name a few. COMPETITIVE STARTING WAGE OF $16.00-$18/hrResponsibilities:General cable assembly. Responsible for soldering, crimping, harnessing, and panel assembly. Perform quality assurance checks designated for each job, function or assignment. Ability to cross-train to fill-in on other production lines or departments, as needed. Maintains good housekeeping and clean work areas in assigned work sites. Ability to meet production standards on specific assignments.Working hours: 6:00 AM - 2:30 PMSkills:-Ability to clearly understand verbal and written instructions and drawings. -Good vision and finger dexterity. -Good employment history. -Desire to be a team player. -Enjoy having fun!Education:High SchoolExperience:0-1 yearsQualifications:Hand crimping One to two years of preparing wires and components for harnessing, soldering, and distribution. Experience/Ability to read prints Terminal Press Operation PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is required to frequently stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; crouch; talk or hear. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. EDUCATION High school diploma or equivalent. First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.Flexible part time hours available! M-FRI: 6:00 AM - 2:30 PMFT: 40 hrs.per wk. 56001Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 6:00 AM - 2:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:30 PM
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $20.00 - $22.00 per hour
      • 6:00 AM - 2:30 PM
      To plan, organize, and control production and personnel, ensuring that product is produced efficiently, on time, and to standard.Responsibilities:?Oversee all aspects of production to ensure productivity, quality, and safety standards are being met or exceeded.?Participate in assessing staffing needs and being involved in the interview and selection process.?Responsible for employee concerns and personnel management of direct reports.?Ensure production optimization by implementing 5S, lean initiatives, and continuous improvement.?Work in partnership with all members of management to ensure successful day-to-day operations.?Ensure that all product manufacturing is performed in accordance with specifications, instructions and requirements.?Monitor production activities and adjust personnel placement and schedules for on-time delivery.?Maintain communication with human resources, customer service, and engineering to allow for consistent and successful operations.?Ensure the work policies and standards set forth in the Kato Cable Employee Handbook are followed.?Adhere to the Quality Policy, including all items assigned to this position in accordance with ISO policies, procedures, and work instructions.?Display appropriate work ethics in the workplace and group settings which provides a positive influence on consumer workers. ?Other duties as assigned.Working hours: 6:00 AM - 2:30 PMSkills:--Experience, Competencies and EducationMust possess an education or experience level that permits the employee to effectively communicate and perform duties, assignments, and responsibilities of the job. Must also have basic computer knowledge. Must be a cooperative, versatile, flexible, reliable, organized, friendly, and self-motivated professional.At least 5 years of previous management experience in a production/ manufacturing setting required.--Language SkillsAbility to read, analyze and interpret the documents relating to the job, function, or assignment. --Mathematical SkillsAbility to perform basic mathematical equations and understand company metrics.--Reasoning AbilityAbility to deal with a variety of job assignments. Must have advanced critical thinking, decision making, multi-tasking, and problem-solving skills. Ability to make decisions when identifying in-process problems.Education:BachelorsExperience:1-4 yearsQualifications:PREFERRED EXPERIENCE?Bachelor?s Degree?Proficient in MS Office, Word, Excel, PowerPoint, Outlook ACCOUNTABILITIES AND MEASURES?Ability to accomplish assigned tasks safely.?Adherence to the Quality Policy and ISO Procedural Requirements. ?Ability to maintain clean work areas and follow good housekeeping practices. ?Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs.?Ability to work effectively, courteously and respectfully with other personnel. Direct Hire position at a staple employer with Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      To plan, organize, and control production and personnel, ensuring that product is produced efficiently, on time, and to standard.Responsibilities:?Oversee all aspects of production to ensure productivity, quality, and safety standards are being met or exceeded.?Participate in assessing staffing needs and being involved in the interview and selection process.?Responsible for employee concerns and personnel management of direct reports.?Ensure production optimization by implementing 5S, lean initiatives, and continuous improvement.?Work in partnership with all members of management to ensure successful day-to-day operations.?Ensure that all product manufacturing is performed in accordance with specifications, instructions and requirements.?Monitor production activities and adjust personnel placement and schedules for on-time delivery.?Maintain communication with human resources, customer service, and engineering to allow for consistent and successful operations.?Ensure the work policies and standards set forth in the Kato Cable Employee Handbook are followed.?Adhere to the Quality Policy, including all items assigned to this position in accordance with ISO policies, procedures, and work instructions.?Display appropriate work ethics in the workplace and group settings which provides a positive influence on consumer workers. ?Other duties as assigned.Working hours: 6:00 AM - 2:30 PMSkills:--Experience, Competencies and EducationMust possess an education or experience level that permits the employee to effectively communicate and perform duties, assignments, and responsibilities of the job. Must also have basic computer knowledge. Must be a cooperative, versatile, flexible, reliable, organized, friendly, and self-motivated professional.At least 5 years of previous management experience in a production/ manufacturing setting required.--Language SkillsAbility to read, analyze and interpret the documents relating to the job, function, or assignment. --Mathematical SkillsAbility to perform basic mathematical equations and understand company metrics.--Reasoning AbilityAbility to deal with a variety of job assignments. Must have advanced critical thinking, decision making, multi-tasking, and problem-solving skills. Ability to make decisions when identifying in-process problems.Education:BachelorsExperience:1-4 yearsQualifications:PREFERRED EXPERIENCE?Bachelor?s Degree?Proficient in MS Office, Word, Excel, PowerPoint, Outlook ACCOUNTABILITIES AND MEASURES?Ability to accomplish assigned tasks safely.?Adherence to the Quality Policy and ISO Procedural Requirements. ?Ability to maintain clean work areas and follow good housekeeping practices. ?Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs.?Ability to work effectively, courteously and respectfully with other personnel. Direct Hire position at a staple employer with Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 6:00 AM - 3:10 PM
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:?Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 6:00 AM - 3:10 PMSkills:Reliable and dependabilityEducation:High SchoolExperience:0-1 yearsQualifications:?High School Diploma or equivalent?Required to pass a pre-employment Drug Screen and Background. Get your foot in the door at this amazing company! Apply NOW! DIRECT HIRE position with an Employee Owned Company that takes great care of their employees, and has much growth opportunity! The Benefit Package is OUTSTANDING! Medical, HRA with 100% Employer Contribution, FREE CLINIC, L/T & S/Term Disability & Life Insurance, PTO, Tuition Reimbursement, 401K and ESOP, and so much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:?Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 6:00 AM - 3:10 PMSkills:Reliable and dependabilityEducation:High SchoolExperience:0-1 yearsQualifications:?High School Diploma or equivalent?Required to pass a pre-employment Drug Screen and Background. Get your foot in the door at this amazing company! Apply NOW! DIRECT HIRE position with an Employee Owned Company that takes great care of their employees, and has much growth opportunity! The Benefit Package is OUTSTANDING! Medical, HRA with 100% Employer Contribution, FREE CLINIC, L/T & S/Term Disability & Life Insurance, PTO, Tuition Reimbursement, 401K and ESOP, and so much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $17.00 - $28.00 per hour
      • 8:00 AM - 5:00 PM
      This company sells, services and finances all makes and models of vehicles. They also sell, service and repair all makes and models of open and enclosed Trailers. And they?re also known for selling and installing Custom Accessories. And are looking for Certified Automotive Technicians!Responsibilities:Service and repairs on all makes and models of Vehicles. Tire & accessory installation-light mechanical. And Trailer service/repair?.requires less mechanical but good handyman skills. (Can train on this).Working hours: 8:00 AM - 5:00 PMSkills:*A-LEVEL: Must have current certifications and 4-5 yrs of experience*B-LEVEL: Current certifications but less than 2-3 yrs of experience*C-LEVEL: General Technician.good hand skills but limited formal training and experienceEducation:TradeExperience:1-4 yearsQualifications:Qualifications: No HS Diploma required. Mechanical skills.Dependable! Passing Drug Screen Call to Action: Direct Hire position with much growth potential and opportunity for the right candidates! Can expand into Trailer and Parts/Accessory Sales.with increased earning potential. New CLEAN facility with state of the art equipment. When you work for this family owned and operated company you truly become part of their family! They are not afraid to invest in additional training and education for the long-haul employees. Are you a Race fan?..gear head? Want the opportunity to work on Race Cars??and perhaps one day be able to RACE ONE?!! This is a potential perk when you work here! Always been an admirer of old & new muscle cars? This family is too, and they pursue this type of business! Click Apply Now!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This company sells, services and finances all makes and models of vehicles. They also sell, service and repair all makes and models of open and enclosed Trailers. And they?re also known for selling and installing Custom Accessories. And are looking for Certified Automotive Technicians!Responsibilities:Service and repairs on all makes and models of Vehicles. Tire & accessory installation-light mechanical. And Trailer service/repair?.requires less mechanical but good handyman skills. (Can train on this).Working hours: 8:00 AM - 5:00 PMSkills:*A-LEVEL: Must have current certifications and 4-5 yrs of experience*B-LEVEL: Current certifications but less than 2-3 yrs of experience*C-LEVEL: General Technician.good hand skills but limited formal training and experienceEducation:TradeExperience:1-4 yearsQualifications:Qualifications: No HS Diploma required. Mechanical skills.Dependable! Passing Drug Screen Call to Action: Direct Hire position with much growth potential and opportunity for the right candidates! Can expand into Trailer and Parts/Accessory Sales.with increased earning potential. New CLEAN facility with state of the art equipment. When you work for this family owned and operated company you truly become part of their family! They are not afraid to invest in additional training and education for the long-haul employees. Are you a Race fan?..gear head? Want the opportunity to work on Race Cars??and perhaps one day be able to RACE ONE?!! This is a potential perk when you work here! Always been an admirer of old & new muscle cars? This family is too, and they pursue this type of business! Click Apply Now!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $17.50 - $19.00 per hour
      • 6:30 AM - 4:00 PM
      Laborers assist welders in all aspects of fabrication and assembly in shop and field site work areas. And assist painters and bead blasters in prepping/coating projects.Responsibilities:Operate all hand/automated tools including tape measure, steel square, wrenches, ratchets, grinders, chop saws, come-a-longs, jacks, chain hoists, clamps, welding dogs & pad-eyes, etc.Lay out, position, and secure parts and assemblies using hoists, pry bars, wrenches, hammer, and wedges as directed.Remove rough spots, slag, etc. from work piece, using portable grinder, wire brush, hand file, bench grinder, wire wheel, etc.Lift, move, transport steel parts using hydraulic lifts, plate clamps, chain hoists, dollies and hand carts.Observe and follows all company safety rules and regulations.Clean and maintain an orderly work area.Work well with others to ensure quality of work while maintaining scheduling demands.Performs other miscellaneous tasks as directed by management.Working hours: 6:30 AM - 4:00 PMSkills:Ability to communicate both verbally as well as through written communication.Reliable and punctual.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to lift 50 pounds.Must possess adequate sight, hearing and use of limbs for all aspects of job.Able to work for periods of time while kneeling, crouching, crawling, climbing steps as well as the ability to work from a ladder.Ability to pass a drug and alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant Company 30%, empl 70%. To offset the deductible?company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Laborers assist welders in all aspects of fabrication and assembly in shop and field site work areas. And assist painters and bead blasters in prepping/coating projects.Responsibilities:Operate all hand/automated tools including tape measure, steel square, wrenches, ratchets, grinders, chop saws, come-a-longs, jacks, chain hoists, clamps, welding dogs & pad-eyes, etc.Lay out, position, and secure parts and assemblies using hoists, pry bars, wrenches, hammer, and wedges as directed.Remove rough spots, slag, etc. from work piece, using portable grinder, wire brush, hand file, bench grinder, wire wheel, etc.Lift, move, transport steel parts using hydraulic lifts, plate clamps, chain hoists, dollies and hand carts.Observe and follows all company safety rules and regulations.Clean and maintain an orderly work area.Work well with others to ensure quality of work while maintaining scheduling demands.Performs other miscellaneous tasks as directed by management.Working hours: 6:30 AM - 4:00 PMSkills:Ability to communicate both verbally as well as through written communication.Reliable and punctual.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to lift 50 pounds.Must possess adequate sight, hearing and use of limbs for all aspects of job.Able to work for periods of time while kneeling, crouching, crawling, climbing steps as well as the ability to work from a ladder.Ability to pass a drug and alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant Company 30%, empl 70%. To offset the deductible?company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Waseca, Minnesota
      • Permanent
      • $18.00 - $21.00 per hour
      • 6:00 AM - 2:25 PM
      The Extruder Technician role will be responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly.Responsibilities:Coordinate and supervise daily machine start up and shut downUnderstand product quality requirements, provide related guidance, and assure products produced conformWork to become Rhinos extrusion and injection molding processing expertTroubleshoot product and process issues and problemsPerform/Coordinate daily equipment maintenance as specifiedAssist with documentation of equipment operation and maintenance schedules/plansGain proficiency in operation of all major equipment Provide training and cross-training to designated personnelProvide input regarding equipment repair, upgrade, and replacementPromote culture of safety, efficiency, and teamworkWorking hours: 6:00 AM - 2:25 PMSkills:--Comfortable in a flexible team environment--Able to work well independently to complete daily workload--Quick Thinking, Ability to problem solve--Attention to detail--Mechanically inclined--Ability to think outside the box, with a goal of improving processes and systems--Follows directions and adheres to company policiesEducation:High SchoolExperience:4-7 yearsQualifications:High school diploma or equivalent5+ years manufacturing experience, or equivalentFlexible, easy going, attitudeBasic knowledge in math, addition, subtraction, multiplication, division, and percentages.Working knowledge of manufacturing equipment and tools.Possesses basic computer skills.Effective communication skills.Candidates must pass a pre-employment background check, drug screen and be eligible for employment without sponsorship. Direct Hire position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business.Company Benefits include:Medical insurance with company contribution, dental, vision, and supplemental life insurance programs also available. Company paid life, short and long-term disability insurancePaid Holidays and paid time offCompany sponsored retirement plan with matching contributionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Extruder Technician role will be responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly.Responsibilities:Coordinate and supervise daily machine start up and shut downUnderstand product quality requirements, provide related guidance, and assure products produced conformWork to become Rhinos extrusion and injection molding processing expertTroubleshoot product and process issues and problemsPerform/Coordinate daily equipment maintenance as specifiedAssist with documentation of equipment operation and maintenance schedules/plansGain proficiency in operation of all major equipment Provide training and cross-training to designated personnelProvide input regarding equipment repair, upgrade, and replacementPromote culture of safety, efficiency, and teamworkWorking hours: 6:00 AM - 2:25 PMSkills:--Comfortable in a flexible team environment--Able to work well independently to complete daily workload--Quick Thinking, Ability to problem solve--Attention to detail--Mechanically inclined--Ability to think outside the box, with a goal of improving processes and systems--Follows directions and adheres to company policiesEducation:High SchoolExperience:4-7 yearsQualifications:High school diploma or equivalent5+ years manufacturing experience, or equivalentFlexible, easy going, attitudeBasic knowledge in math, addition, subtraction, multiplication, division, and percentages.Working knowledge of manufacturing equipment and tools.Possesses basic computer skills.Effective communication skills.Candidates must pass a pre-employment background check, drug screen and be eligible for employment without sponsorship. Direct Hire position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business.Company Benefits include:Medical insurance with company contribution, dental, vision, and supplemental life insurance programs also available. Company paid life, short and long-term disability insurancePaid Holidays and paid time offCompany sponsored retirement plan with matching contributionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 5:00 AM - 3:15 PM
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 5:00 AM - 3:15 PMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Experience is a factory setting-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRegularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.Requires passing pre-employment screening, including a drug screen Call to Action: Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 5:00 AM - 3:15 PMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Experience is a factory setting-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRegularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.Requires passing pre-employment screening, including a drug screen Call to Action: Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.