You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    207 Assembly Manufacturing & Production jobs found

    Filter3
    Clear all
    Page 7
      • Frederick, Maryland
      • Temporary
      • $18.00 per hour
      • 6:00 AM - 3:00 PM
      Give us a call to join the growing Biotech company, Ellume, in the local Frederick area to be an exciting new member to our community.Responsibilities:Reliable to show up to work on time and take minimal time off.Assemble digital diagnostic devices and components.Conduct visual QC checks of products along the production line.Set-Up, stock, and clean work areas.Use simple equipment such as, label printer.Use Personal Protective Equipment (PPE) as well as Electrostatic Discharge Protection (EPA) equipment.Work within Good Manufacturing Practice (GMP) requirements.Comply with Quality Management System (QMS).Working hours: 6:00 AM - 3:00 PMSkills:Fluent in Business English, BOTH verbal & written.Excellent fine motor skills, capable of managing repetitive assembly.Keen attention to detail, able to carefully read & follow instructions.Good organizational skills.Capable of working independently or within a team, while adhering to production timelines.Strong sense of urgency.Exceptional interpersonal skills.Basic digital literacy.Good time-management skills.Education:High SchoolExperience:0-1 yearsQualifications:Must have reliable transportation.Does not call out or come into work late.Works hard day in and day out. Give us a call today at (240)878-0929 or (301) 694-7000 and ask for Desiree or Dakota to join Ellume!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Give us a call to join the growing Biotech company, Ellume, in the local Frederick area to be an exciting new member to our community.Responsibilities:Reliable to show up to work on time and take minimal time off.Assemble digital diagnostic devices and components.Conduct visual QC checks of products along the production line.Set-Up, stock, and clean work areas.Use simple equipment such as, label printer.Use Personal Protective Equipment (PPE) as well as Electrostatic Discharge Protection (EPA) equipment.Work within Good Manufacturing Practice (GMP) requirements.Comply with Quality Management System (QMS).Working hours: 6:00 AM - 3:00 PMSkills:Fluent in Business English, BOTH verbal & written.Excellent fine motor skills, capable of managing repetitive assembly.Keen attention to detail, able to carefully read & follow instructions.Good organizational skills.Capable of working independently or within a team, while adhering to production timelines.Strong sense of urgency.Exceptional interpersonal skills.Basic digital literacy.Good time-management skills.Education:High SchoolExperience:0-1 yearsQualifications:Must have reliable transportation.Does not call out or come into work late.Works hard day in and day out. Give us a call today at (240)878-0929 or (301) 694-7000 and ask for Desiree or Dakota to join Ellume!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Salt Lake City, Utah
      • Permanent
      • $19.42 - $21.28 per hour
      • 6:00 AM - 6:00 PM (Various Shifts Available)
      HIRING IMMEDIATELY! No Assembly experience? NO PROBLEM! We are willing to train the right person!Be part of a fast growing team in the medical industryGreat work environment - full of perks (free gym, free lunch and more)Amazing Benefits including 4 weeks of PAID Vacation; AMAZING Health Insurance, Tuition Reimbursement, 401k and all the perks.Great pay from $19.42 to $21.28 p/hr.Must be able to work the following.-Sunday - Wednesday--or--Wednesday - SaturdayWorking hours: 6:00 AM - 6:00 PM (Various Shifts Available)Responsibilities:This position is responsible for manufacturing products efficiently, accurately, safely, and on time. Operates manufacturing equipment and in-process instrumentation to manufacture regulated products in accordance to QSRs, company policy, and safety regulations.Working hours: 6:00 AM - 6:00 PM (Various Shifts Available)Skills:You will be using your attention to detail skills by assembling medical testing kits with accuracy, high quality standards, high productivity and efficiency.Education:High SchoolExperience:0-1 yearsQualifications:At least 6 months of experience working in a production/manufacturing environment preferredHigh School Diploma or GED. Text MEDICAL to 801-519-5093 and we'll contact you!-- OR --APPLY HERE!Call us, Text us! -- We want to hear from you ASAP! :-)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      HIRING IMMEDIATELY! No Assembly experience? NO PROBLEM! We are willing to train the right person!Be part of a fast growing team in the medical industryGreat work environment - full of perks (free gym, free lunch and more)Amazing Benefits including 4 weeks of PAID Vacation; AMAZING Health Insurance, Tuition Reimbursement, 401k and all the perks.Great pay from $19.42 to $21.28 p/hr.Must be able to work the following.-Sunday - Wednesday--or--Wednesday - SaturdayWorking hours: 6:00 AM - 6:00 PM (Various Shifts Available)Responsibilities:This position is responsible for manufacturing products efficiently, accurately, safely, and on time. Operates manufacturing equipment and in-process instrumentation to manufacture regulated products in accordance to QSRs, company policy, and safety regulations.Working hours: 6:00 AM - 6:00 PM (Various Shifts Available)Skills:You will be using your attention to detail skills by assembling medical testing kits with accuracy, high quality standards, high productivity and efficiency.Education:High SchoolExperience:0-1 yearsQualifications:At least 6 months of experience working in a production/manufacturing environment preferredHigh School Diploma or GED. Text MEDICAL to 801-519-5093 and we'll contact you!-- OR --APPLY HERE!Call us, Text us! -- We want to hear from you ASAP! :-)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $21.80 per hour
      • 10:00 PM - 6:00 PM
      As a CNC Machinist, you will support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics.3rd shift hours: Sunday night - Friday morning, 10:00 p.m. - 6:00 a.m.Pay: Starting at $21.80 an hourResponsibilities:Set up, adjust, and operate basic or specialized machine tools used to perform precision machining operations.Fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.Design fixtures, tooling, or experimental parts to meet special engineering needs.Utilize gauges, micrometers, Vernier calipers, charts, and other tools to measure tolerance, make decisions and record data.Working hours: 10:00 PM - 6:00 PMSkills:Ability to machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.Mechanically inclined and good with hand tools. Our team members.Experience in Lean Manufacturing.Experience using complex technical tools, CAD and CAM.Education:High SchoolExperience:1-4 yearsQualifications:A strong, stable work history.High school Diploma or GED equivalent is required.Degree or Certificate in CNC Machining, Completion Right Skills Now Course or equivalent experience required. This is a Direct Hire Opportunity! Please apply online or call and ask for Jennifer at 507-432-2430.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      As a CNC Machinist, you will support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics.3rd shift hours: Sunday night - Friday morning, 10:00 p.m. - 6:00 a.m.Pay: Starting at $21.80 an hourResponsibilities:Set up, adjust, and operate basic or specialized machine tools used to perform precision machining operations.Fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.Design fixtures, tooling, or experimental parts to meet special engineering needs.Utilize gauges, micrometers, Vernier calipers, charts, and other tools to measure tolerance, make decisions and record data.Working hours: 10:00 PM - 6:00 PMSkills:Ability to machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.Mechanically inclined and good with hand tools. Our team members.Experience in Lean Manufacturing.Experience using complex technical tools, CAD and CAM.Education:High SchoolExperience:1-4 yearsQualifications:A strong, stable work history.High school Diploma or GED equivalent is required.Degree or Certificate in CNC Machining, Completion Right Skills Now Course or equivalent experience required. This is a Direct Hire Opportunity! Please apply online or call and ask for Jennifer at 507-432-2430.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Evans, Georgia
      • Temporary
      • $15.00 - $15.50 per hour
      • 3:00 PM - 12:00 AM
      Interested in a Great job with a Great company!? We are looking for dedicated employees to work full time 40+ hours a week at a production facility in Evans Georgia. Must haves:At least six months of industrial experience using hand tools and power tools. Ability to read assembly directions and assemble with quality. Working hours: 630AM-230PM 1st shift330 PM - 12:30 AM 2nd shiftChance for mandatory overtime.Responsibilities:-Assemble parts using hand tools and power tools-Prepare inventory for shipmentWorking hours: 3:00 PM - 12:00 AMSkills:-Great attitude and willingness to work as a team-Excellent attendance-Commitment to safety and quality-Must have reliable transportation-Hard WorkingEducation:High SchoolExperience:1-4 yearsQualifications:-Must have a high school diploma, GED, or higher education degree-Six months of industrial work experience-Strong knowledge of hand tools and power tools-Ability to lift up to 35 lbs.-Must be able to stand for duration of shift Please apply and then give us a call at 706-868-0911 to review your application.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Interested in a Great job with a Great company!? We are looking for dedicated employees to work full time 40+ hours a week at a production facility in Evans Georgia. Must haves:At least six months of industrial experience using hand tools and power tools. Ability to read assembly directions and assemble with quality. Working hours: 630AM-230PM 1st shift330 PM - 12:30 AM 2nd shiftChance for mandatory overtime.Responsibilities:-Assemble parts using hand tools and power tools-Prepare inventory for shipmentWorking hours: 3:00 PM - 12:00 AMSkills:-Great attitude and willingness to work as a team-Excellent attendance-Commitment to safety and quality-Must have reliable transportation-Hard WorkingEducation:High SchoolExperience:1-4 yearsQualifications:-Must have a high school diploma, GED, or higher education degree-Six months of industrial work experience-Strong knowledge of hand tools and power tools-Ability to lift up to 35 lbs.-Must be able to stand for duration of shift Please apply and then give us a call at 706-868-0911 to review your application.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Flemington, New Jersey
      • Temp to Perm
      • $18.00 per hour
      • 7:30 AM - 6:00 PM
      We are looking for an Assembler who is willing to work in a fast-paced environment. Someone with strong work history and have an Assembly experience.Four Day (10 Hours/Day) Work Weeks with potential OvertimeWorking Hours: Monday - Thursday 7:30am to 6:00pm Tuesday - Friday 7:30am to 6:00pmResponsibilities:Laminating transformersCutting and soldering wiresOperating the oven and varnishing transformersUse the overhead pulley to transport larger transformers around the departmentReading blue prints and schematicsBrazing metal and other materialWinding coils (with or without machinery assistance)Following and completing specific work ordersWorking hours: 7:30 AM - 6:00 PMSkills:Positive attitude with a willingness to learnAlong with the ability to use hand and power tools for electrical wiring, crimping, and solderingAbility to work individually or as part of a teamEducation:High SchoolExperience:1-4 yearsQualifications:Atleast High School graduate Experience with basic electrical concepts preferred. Strong work history Excellent growth opportunities are available for individuals who are willing to learn and develop plus comprehensive benefits package!Spherion?s local offices are waiting to hear from you today! Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for an Assembler who is willing to work in a fast-paced environment. Someone with strong work history and have an Assembly experience.Four Day (10 Hours/Day) Work Weeks with potential OvertimeWorking Hours: Monday - Thursday 7:30am to 6:00pm Tuesday - Friday 7:30am to 6:00pmResponsibilities:Laminating transformersCutting and soldering wiresOperating the oven and varnishing transformersUse the overhead pulley to transport larger transformers around the departmentReading blue prints and schematicsBrazing metal and other materialWinding coils (with or without machinery assistance)Following and completing specific work ordersWorking hours: 7:30 AM - 6:00 PMSkills:Positive attitude with a willingness to learnAlong with the ability to use hand and power tools for electrical wiring, crimping, and solderingAbility to work individually or as part of a teamEducation:High SchoolExperience:1-4 yearsQualifications:Atleast High School graduate Experience with basic electrical concepts preferred. Strong work history Excellent growth opportunities are available for individuals who are willing to learn and develop plus comprehensive benefits package!Spherion?s local offices are waiting to hear from you today! Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Pensacola, Florida
      • Temp to Perm
      • $14.15 per hour
      • 6:00 PM - 6:00 AM (Various Shifts Available)
      Tired of jumping from job to job? Looking for somewhere to stay and grow with? Well we have the job for you! Spherion is hiring several Packout Associates for our client in Cantonment. This position would be great for someone who loves working in a warehouse environment and who can work a rotating shift schedule.The schedule for this position is 6am-6pm and 6pm-6am. You'll work both days and nights with days off throughout the week. (essentially only working about 15 days out the month). The pay for this position is $14.15 per hour. Once hired on with the company, they pay FULL BENEFITS!Responsibilities:Startup and close down of their machine as necessaryRoutine checks and preventative maintenance of equipmentEfficient completion of final assembly and then packaging processes (such as applying fastenings or ties) if requiredProduct labeling and inspection of final productCompletion of distribution documentation may also be a responsibility of packaging operatorsMay be required to move completed boxes of products ? operation of a forklift for those who are qualifiedMaintaining cleanliness of equipment and work areaReporting issues when they arise ? this should be done quickly to minimize any impact on the efficiency of productionQuality checks of their equipment, process or product in accordance with the site?s quality requirementsMaintaining all relevant documentation for their equipment and/or process. This documentation is likely to include quality documentation, ensuring adherence to internal procedures as well as external regulationsWorking hours: 6:00 PM - 6:00 AM (Various Shifts Available)Skills:Communication SkillsAttention to DetailBasic mathematical skillsAbilities:Ability to work in a team environmentPerforms duties with the highest regard for safety and qualityAbility to understand and follow site protocols, policies and proceduresAbility to work on your feet for the entirety of a shiftAbility to lift up to 55 pounds repeatedlyExcellent hand-eye coordinationEducation:High SchoolExperience:1-4 yearsQualifications:Minimum of one year of recent experience in a warehouse settingWork a flexible schedule, working both days and nights in rotationBe accustomed to working in extreme heat or cold weather conditionsBe able to pass a criminal background check and drug testHave 2 forms of valid identification Apply Now!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Tired of jumping from job to job? Looking for somewhere to stay and grow with? Well we have the job for you! Spherion is hiring several Packout Associates for our client in Cantonment. This position would be great for someone who loves working in a warehouse environment and who can work a rotating shift schedule.The schedule for this position is 6am-6pm and 6pm-6am. You'll work both days and nights with days off throughout the week. (essentially only working about 15 days out the month). The pay for this position is $14.15 per hour. Once hired on with the company, they pay FULL BENEFITS!Responsibilities:Startup and close down of their machine as necessaryRoutine checks and preventative maintenance of equipmentEfficient completion of final assembly and then packaging processes (such as applying fastenings or ties) if requiredProduct labeling and inspection of final productCompletion of distribution documentation may also be a responsibility of packaging operatorsMay be required to move completed boxes of products ? operation of a forklift for those who are qualifiedMaintaining cleanliness of equipment and work areaReporting issues when they arise ? this should be done quickly to minimize any impact on the efficiency of productionQuality checks of their equipment, process or product in accordance with the site?s quality requirementsMaintaining all relevant documentation for their equipment and/or process. This documentation is likely to include quality documentation, ensuring adherence to internal procedures as well as external regulationsWorking hours: 6:00 PM - 6:00 AM (Various Shifts Available)Skills:Communication SkillsAttention to DetailBasic mathematical skillsAbilities:Ability to work in a team environmentPerforms duties with the highest regard for safety and qualityAbility to understand and follow site protocols, policies and proceduresAbility to work on your feet for the entirety of a shiftAbility to lift up to 55 pounds repeatedlyExcellent hand-eye coordinationEducation:High SchoolExperience:1-4 yearsQualifications:Minimum of one year of recent experience in a warehouse settingWork a flexible schedule, working both days and nights in rotationBe accustomed to working in extreme heat or cold weather conditionsBe able to pass a criminal background check and drug testHave 2 forms of valid identification Apply Now!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Olive Branch, Mississippi
      • Temp to Perm
      • $15.00 per hour
      • 8:00 AM - 4:30 PM
      We are looking for an energetic individual to join this team as a Mechanical Inspector. This company is a fast paced medical service provider for the top Orthopedic companies in the industry. The business focus is sterile and non-sterile packaging of medical devices. Mechanical inspection and assembly are designed to meet the outsourcing requirements of medical device manufacturers seeking to reduce costs while maintaining high levels of quality, accuracy, and timeliness.This company is FDA and ISO registered and employs a detailed internal quality system to ensure ISO compliance.Responsibilities:The Mechanical Inspector is responsible for verifying product, labeling and packing specifications per the customer's specific requirements. Other responsibilities could include labeling and packaging as required.Working hours: 8:00 AM - 4:30 PMSkills:Ability to use scales/gauges/calipers/Tappi and color chartsAbility to read and understand basic prints/drawingsAdvanced inspection and mechanical aptitudeAbility to calibrate with workmanship expectations of customerKnowledge and execution of issues related to FDA/GMP complianceUnderstanding of GD&T20/20 Vision or corrected 20/20 VisionEducation:High SchoolExperience:1-4 yearsQualifications:Requires High School Diploma or GEDRequires 1-3 years of prior Mechanical Inspection experience Are you comfortable working with computers, a positive attitude, attention to detail and an excellent work ethic? Do you want an opportunity and not just a job? Do you want to be a part of a company experiencing tremendous growth? Are you looking for meaningful work? Do you want to work in a clean, modern environment?Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for an energetic individual to join this team as a Mechanical Inspector. This company is a fast paced medical service provider for the top Orthopedic companies in the industry. The business focus is sterile and non-sterile packaging of medical devices. Mechanical inspection and assembly are designed to meet the outsourcing requirements of medical device manufacturers seeking to reduce costs while maintaining high levels of quality, accuracy, and timeliness.This company is FDA and ISO registered and employs a detailed internal quality system to ensure ISO compliance.Responsibilities:The Mechanical Inspector is responsible for verifying product, labeling and packing specifications per the customer's specific requirements. Other responsibilities could include labeling and packaging as required.Working hours: 8:00 AM - 4:30 PMSkills:Ability to use scales/gauges/calipers/Tappi and color chartsAbility to read and understand basic prints/drawingsAdvanced inspection and mechanical aptitudeAbility to calibrate with workmanship expectations of customerKnowledge and execution of issues related to FDA/GMP complianceUnderstanding of GD&T20/20 Vision or corrected 20/20 VisionEducation:High SchoolExperience:1-4 yearsQualifications:Requires High School Diploma or GEDRequires 1-3 years of prior Mechanical Inspection experience Are you comfortable working with computers, a positive attitude, attention to detail and an excellent work ethic? Do you want an opportunity and not just a job? Do you want to be a part of a company experiencing tremendous growth? Are you looking for meaningful work? Do you want to work in a clean, modern environment?Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Inwood, West Virginia
      • Temp to Perm
      • $14.25 per hour
      • Various Shifts Available
      Ensures product conforms to established quality and customer criteria by performing secondary operationsand product inspection as defined in training sessions, by the controlled visual standards, and within theControl Plans. Work as a team with all manufacturing personnel to maintain a clean and safe workenvironment.Responsibilities:Inspect parts for conformance to established quality criteria.Perform secondary operations such as removing parts from the mold, trimming, decorating, and assembly.package and label parts as specified in the Control Plan.Document and report nonconforming product to Product Specialist or Shift Supervisor.Document readouts from auxiliary equipment.Document downtime and its related cause. Document in-process inspection results. Document and report production quantity to Shift Supervisor. Assist co-workers as necessary. Assist in training new employees as needed. Report any unsafe situations to Production Specialist or Shift Supervisor.Maintain a clean and orderly work environment.Working hours: Various Shifts AvailableSkills:Good communication and interpersonal skills.Education:No Degree RequiredExperience:0-1 yearsQualifications:High School Diploma or GED preferred. Call us today to schedule a in house interview @ 304-267-9668Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Ensures product conforms to established quality and customer criteria by performing secondary operationsand product inspection as defined in training sessions, by the controlled visual standards, and within theControl Plans. Work as a team with all manufacturing personnel to maintain a clean and safe workenvironment.Responsibilities:Inspect parts for conformance to established quality criteria.Perform secondary operations such as removing parts from the mold, trimming, decorating, and assembly.package and label parts as specified in the Control Plan.Document and report nonconforming product to Product Specialist or Shift Supervisor.Document readouts from auxiliary equipment.Document downtime and its related cause. Document in-process inspection results. Document and report production quantity to Shift Supervisor. Assist co-workers as necessary. Assist in training new employees as needed. Report any unsafe situations to Production Specialist or Shift Supervisor.Maintain a clean and orderly work environment.Working hours: Various Shifts AvailableSkills:Good communication and interpersonal skills.Education:No Degree RequiredExperience:0-1 yearsQualifications:High School Diploma or GED preferred. Call us today to schedule a in house interview @ 304-267-9668Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $17.00 per hour
      • 7:30 AM - 4:00 PM
      Spherion has a wonderful temp-to-hire opportunity for you, offering stable hours on 1st shift. We are looking for motivated individuals with an interest in working in electronics manufacturing! Spherion in partnership with our client has some assembly positions available! Interested in learning new things? Working with your hands? Curious about the inner workings of your electronics? This might be the job for you!Responsibilities:Follow technical instructions, interpret engineering blueprints and technical terms.Discern quality of parts and materials used in production.Inventory parts and tools used in the assembling process.Follow company procedures and directives.Test finished products for defects.Maintain the tools used to create products.Keep a clean and well-maintained workspace.Working hours: 7:30 AM - 4:00 PMSkills:Good communication skillsExcellent hand-eye coordinationBasic computer skills such as emailing, record keeping, ordering, inventory management and form filingEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to lift 30#Drug screen/background requiredAbility to operate soldering machinesAbility to create and Interpret technical documentation Don't wait -- apply right now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has a wonderful temp-to-hire opportunity for you, offering stable hours on 1st shift. We are looking for motivated individuals with an interest in working in electronics manufacturing! Spherion in partnership with our client has some assembly positions available! Interested in learning new things? Working with your hands? Curious about the inner workings of your electronics? This might be the job for you!Responsibilities:Follow technical instructions, interpret engineering blueprints and technical terms.Discern quality of parts and materials used in production.Inventory parts and tools used in the assembling process.Follow company procedures and directives.Test finished products for defects.Maintain the tools used to create products.Keep a clean and well-maintained workspace.Working hours: 7:30 AM - 4:00 PMSkills:Good communication skillsExcellent hand-eye coordinationBasic computer skills such as emailing, record keeping, ordering, inventory management and form filingEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to lift 30#Drug screen/background requiredAbility to operate soldering machinesAbility to create and Interpret technical documentation Don't wait -- apply right now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Iowa Park, Texas
      • Temp to Perm
      • $13.00 - $14.95 per hour
      • 12:00 AM - 12:00 PM (Various Shifts Available)
      We are seeking manufacturing workers to join the team of a manufacturer located in Iowa Park, TX. Various departments (see below) and shifts available. Call our office to speak with one of our recruiters to find out more info!Responsibilities:Packing: Ensure that all finished parts are clean and report any damages/ defects to the supervisor. Responsible for inspecting products for quality assurance, packing them into boxes and label, and taking counts to ensure proper hardware is in the box. Assembly: Assembles metal fasteners to the metal roof clamp; responsible for the insertion of rubber blades into the fastener, securing adhesive, and cleaning the piece. Label, weigh, and bag product. CNC Operator: Load and unloading parts into a CNC machine and set it up using the control panel on the machine panel. Follow blueprints to ensure quality parts are produced and isolate any parts that do not meet specs.CNC Stamper: Responsible for stamping company logo onto completed parts by utilizing a stamping machine; must pay close attention to detailPunch Press: Punching holes and stamping logo onto cut metal fasteners. Place the cut fastener into the press and press both buttons on the top of the machine to activate the hydraulic press that comes down and stamps the fastener (2-3 sec process). Remove part from machine and inspect for quality.Working hours: 12:00 AM - 12:00 PM (Various Shifts Available)Skills:Must be highly detail-orientedAbility to perform basic math calculations (add, subtract, multiply, divide)Must be able to read a rulerAbility to read and understand blueprints is a plusEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalenceMust be able to lift up to 50 pounds regularlyMust be able to stand on feet throughout duration of shiftMust be willing to submit to drug screen and background check. Please register at www.spherion.com/apply. Once you've registered, please come to our office at 4020 Call Field Rd Monday-Friday between the hours of 8a-10a or 1p-3p for a prescreen interview. We look forward to seeing you soon!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are seeking manufacturing workers to join the team of a manufacturer located in Iowa Park, TX. Various departments (see below) and shifts available. Call our office to speak with one of our recruiters to find out more info!Responsibilities:Packing: Ensure that all finished parts are clean and report any damages/ defects to the supervisor. Responsible for inspecting products for quality assurance, packing them into boxes and label, and taking counts to ensure proper hardware is in the box. Assembly: Assembles metal fasteners to the metal roof clamp; responsible for the insertion of rubber blades into the fastener, securing adhesive, and cleaning the piece. Label, weigh, and bag product. CNC Operator: Load and unloading parts into a CNC machine and set it up using the control panel on the machine panel. Follow blueprints to ensure quality parts are produced and isolate any parts that do not meet specs.CNC Stamper: Responsible for stamping company logo onto completed parts by utilizing a stamping machine; must pay close attention to detailPunch Press: Punching holes and stamping logo onto cut metal fasteners. Place the cut fastener into the press and press both buttons on the top of the machine to activate the hydraulic press that comes down and stamps the fastener (2-3 sec process). Remove part from machine and inspect for quality.Working hours: 12:00 AM - 12:00 PM (Various Shifts Available)Skills:Must be highly detail-orientedAbility to perform basic math calculations (add, subtract, multiply, divide)Must be able to read a rulerAbility to read and understand blueprints is a plusEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalenceMust be able to lift up to 50 pounds regularlyMust be able to stand on feet throughout duration of shiftMust be willing to submit to drug screen and background check. Please register at www.spherion.com/apply. Once you've registered, please come to our office at 4020 Call Field Rd Monday-Friday between the hours of 8a-10a or 1p-3p for a prescreen interview. We look forward to seeing you soon!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 per hour
      • 3:00 PM - 1:15 AM
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:?Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.?Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm.?Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. ?Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).?Maintain all lubricants and coolants on the machine that are used in daily operation.?Keep work area clean.?Punching, employing recognized tooling and procedures where tolerances are close.?Assist lower-level operators to develop skills and to produce production parts to spec.?Operates all common machine shop equipment and hand tools skillfully.?Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.?Sets up machines for less skills machine operators.?Produces precision items beyond the capabilities of production machine operators.?Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 1:15 AMSkills:--Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments--Requires a high degree of experience and trade skill--Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear--Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:?Requires a high school diploma or GED?Requires a passing pre-employment screening, including a drug screen DIRECT HIRE with 100% Employee owned Company. BENEFITS! BENEFITS! BENEFITS! Including FREE CLINIC for employee and dependents!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:?Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.?Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm.?Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. ?Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).?Maintain all lubricants and coolants on the machine that are used in daily operation.?Keep work area clean.?Punching, employing recognized tooling and procedures where tolerances are close.?Assist lower-level operators to develop skills and to produce production parts to spec.?Operates all common machine shop equipment and hand tools skillfully.?Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.?Sets up machines for less skills machine operators.?Produces precision items beyond the capabilities of production machine operators.?Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 1:15 AMSkills:--Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments--Requires a high degree of experience and trade skill--Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear--Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:?Requires a high school diploma or GED?Requires a passing pre-employment screening, including a drug screen DIRECT HIRE with 100% Employee owned Company. BENEFITS! BENEFITS! BENEFITS! Including FREE CLINIC for employee and dependents!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Essex Junction, Vermont
      • Temp to Perm
      • $19.20 per hour
      • 6:45 PM - 7:15 AM
      We have an exciting new opening with one of our clients, an optical products manufacturer in Essex, Vermont! This manufacturing technician role will perform a variety of processes such as inspection, assembly, tracking and packing various products. If you have previous experience and good attention to detail, apply today!Schedule: Thursday through Saturday, with alternating Wednesdays 6:45pm-7:15amResponsibilities:-Perform visual inspections on lenses-Identify and use various lens templates and eye loops-Work in a clean room environment and rotate work stations-Use tracking sheets/labels and systemsWorking hours: 6:45 PM - 7:15 AMSkills:-Work in a team environment and assist co-workers in various roles within the manufacturing department.-Be good with numbers and capable of writing legibly to fulfill documentation of productionquantities on work orders.-Reading and interpreting documents such as safety rules, operating and maintenance instructions,and procedure manuals.Education:High SchoolExperience:1-4 yearsQualifications:-Quality Control and Quality Inspection experience is a plus-Must be able to stand for long periods of time-High school diploma or general education degree (GED).-Some travel may be required between facilities-Background check required Call or text 802-864-5900 to apply directly!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have an exciting new opening with one of our clients, an optical products manufacturer in Essex, Vermont! This manufacturing technician role will perform a variety of processes such as inspection, assembly, tracking and packing various products. If you have previous experience and good attention to detail, apply today!Schedule: Thursday through Saturday, with alternating Wednesdays 6:45pm-7:15amResponsibilities:-Perform visual inspections on lenses-Identify and use various lens templates and eye loops-Work in a clean room environment and rotate work stations-Use tracking sheets/labels and systemsWorking hours: 6:45 PM - 7:15 AMSkills:-Work in a team environment and assist co-workers in various roles within the manufacturing department.-Be good with numbers and capable of writing legibly to fulfill documentation of productionquantities on work orders.-Reading and interpreting documents such as safety rules, operating and maintenance instructions,and procedure manuals.Education:High SchoolExperience:1-4 yearsQualifications:-Quality Control and Quality Inspection experience is a plus-Must be able to stand for long periods of time-High school diploma or general education degree (GED).-Some travel may be required between facilities-Background check required Call or text 802-864-5900 to apply directly!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Alexandria, South Dakota
      • Permanent
      • $20.00 per hour
      • 6:30 AM - 5:00 PM
      Spherion Staffing has an immediate opening for a Machine Operator with a company located in Alexandria, SD! This candidate will operate various machines to assemble and package products. Qualified applicants should have previous manufacturing or assembly experience.Pay $20/hour Hours: Monday - Thursday 6:30 am - 5:00 pm, overtime may be requiredResponsibilities:-Operate production machines and equipment-Meet production standards-Machine set-ups -Measure and align materials accurately-Inspect and evaluate materials-Support other production areas as needed-Maintain a clean work environment-Other duties as assignedResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -Ability to read and write legibly-Accurately use measuring equipment-Ability to lift up to 50lbs-Should have good computer skills -Hand eye coordination -Must have a good understanding of blue prints and operation layoutsBenefits: -Medical, Dental, Vision Insurance-Retirement account with matched contributions-Paid vacation and sick/ personal leave-Holiday Pay-Attendance bonusesEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has an immediate opening for a Machine Operator with a company located in Alexandria, SD! This candidate will operate various machines to assemble and package products. Qualified applicants should have previous manufacturing or assembly experience.Pay $20/hour Hours: Monday - Thursday 6:30 am - 5:00 pm, overtime may be requiredResponsibilities:-Operate production machines and equipment-Meet production standards-Machine set-ups -Measure and align materials accurately-Inspect and evaluate materials-Support other production areas as needed-Maintain a clean work environment-Other duties as assignedResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -Ability to read and write legibly-Accurately use measuring equipment-Ability to lift up to 50lbs-Should have good computer skills -Hand eye coordination -Must have a good understanding of blue prints and operation layoutsBenefits: -Medical, Dental, Vision Insurance-Retirement account with matched contributions-Paid vacation and sick/ personal leave-Holiday Pay-Attendance bonusesEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Williamsport, Maryland
      • Temporary
      • $16.25 per hour
      • Various Shifts Available
      1st shift: Mon-Fri 7AM-3:30PM - $16.25 per hour Position Summary: Responsible for moving materials, supplies, components to designated areas within the facility. Printing and process of pick tickets and manufacturing orders (MOs). Assembly of components to finished goods parts for customer's orders. Picking/packing of orders and processing for shipment.Essential Job Functions and Accountabilities: Must have shipping, receiving experienceMust have inventory experienceFulfilling pull tickets and getting parts to proper location in a timely mannerOperating, loading/unloading trucksAbility to identify, label parts and ensure quantity of parts to be shippedMust be able to work independentlyMust be able to use counting scaleAbility to follow up on pull ticketsAbility to learn and retain general knowledge of quantification of parts along with when and where they goAbility to read MOs and obtain correct product type and quantity to runInform Supervisor of any issues with operation or qualityMaintain a clean workstation and facilityMust wear proper PPE at all times and conform to all safety rules and regulationsPerform any other task asked by ManagementResponsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      1st shift: Mon-Fri 7AM-3:30PM - $16.25 per hour Position Summary: Responsible for moving materials, supplies, components to designated areas within the facility. Printing and process of pick tickets and manufacturing orders (MOs). Assembly of components to finished goods parts for customer's orders. Picking/packing of orders and processing for shipment.Essential Job Functions and Accountabilities: Must have shipping, receiving experienceMust have inventory experienceFulfilling pull tickets and getting parts to proper location in a timely mannerOperating, loading/unloading trucksAbility to identify, label parts and ensure quantity of parts to be shippedMust be able to work independentlyMust be able to use counting scaleAbility to follow up on pull ticketsAbility to learn and retain general knowledge of quantification of parts along with when and where they goAbility to read MOs and obtain correct product type and quantity to runInform Supervisor of any issues with operation or qualityMaintain a clean workstation and facilityMust wear proper PPE at all times and conform to all safety rules and regulationsPerform any other task asked by ManagementResponsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Dalton, Minnesota
      • Temp to Perm
      • $15.00 - $17.00 per hour
      • 6:00 AM - 4:30 PM
      Do you pride yourself in your work? Do you want to work for a company that is known for high quality standards and products? Spherion has the company and the job for you. This is a great opportunity to get in on the ground floor with a local company that is doing big things. We are hiring highly motivated and reliable talent that wish to excel and are driven to fabricate and assembly ornamental and structural components.Responsibilities:-Assemble parts by bolting and riveting-Operate power and hand tools, such as, grinders, drills, and saws-Safely operate forklifts, overhead cranes and other material handling equipment-Locate and mark bending and cutting lines onto work-piece-Set up and operate fabricating machines such as brakes, saws, rollers, shears, flame cutters, and drill presses-Fabricate and assemble sheet metal products-Remove metal chips and shavings from surfaces of machines and wipes surfaces of machines to remove excess oil.-Deburr or polish parts-Clean around work areas-Change tools on powered equipmentWorking hours: 6:00 AM - 4:30 PMSkills:-Work efficiently, accurately and safely-Read a shop drawingEducation:High SchoolExperience:0-1 yearsQualifications:-Must be able to lift 50lbs regularly-Must be able to stand for complete shift-Walk the length of workstation-Bend to pick up items, lift and reach to work table heightMonday-Thursday: 6:00am to 4:30pmFriday: 6:00am to 12:00pm To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Do you pride yourself in your work? Do you want to work for a company that is known for high quality standards and products? Spherion has the company and the job for you. This is a great opportunity to get in on the ground floor with a local company that is doing big things. We are hiring highly motivated and reliable talent that wish to excel and are driven to fabricate and assembly ornamental and structural components.Responsibilities:-Assemble parts by bolting and riveting-Operate power and hand tools, such as, grinders, drills, and saws-Safely operate forklifts, overhead cranes and other material handling equipment-Locate and mark bending and cutting lines onto work-piece-Set up and operate fabricating machines such as brakes, saws, rollers, shears, flame cutters, and drill presses-Fabricate and assemble sheet metal products-Remove metal chips and shavings from surfaces of machines and wipes surfaces of machines to remove excess oil.-Deburr or polish parts-Clean around work areas-Change tools on powered equipmentWorking hours: 6:00 AM - 4:30 PMSkills:-Work efficiently, accurately and safely-Read a shop drawingEducation:High SchoolExperience:0-1 yearsQualifications:-Must be able to lift 50lbs regularly-Must be able to stand for complete shift-Walk the length of workstation-Bend to pick up items, lift and reach to work table heightMonday-Thursday: 6:00am to 4:30pmFriday: 6:00am to 12:00pm To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Indianapolis, Indiana
      • Permanent
      • $18.20 - $18.40 per hour
      • Various Shifts Available
      Spherion is hiring Production Associates to begin work immediately in Indianapolis, IN!This is a Direct Hire Opportunity! 1st shift: 6am to 4:30pm $18.20/hr2nd Shift: 5pm-3:30am $18.40/hr(Need to be flexible for both)SUMMARYUnder general direct supervision perform assembly, wiring, adjusting or testing operations in the construction of furnaces, air conditioners and associated components. Works from simple drawings, employing small hand tools and pneumatic drill motors and drivers on repetitive diversified operationsResponsibilities:- Assembling tubing and pipe fittings.- Assembling fabricated sheet metal parts.- Assembling motors, shafts and fan assemblies.- Stripping wires, forming, soldering and assembling small electrical components.- Cutting and forming tubes.- Testing and adjusting to meet operating specifications.- Packing units in cartons or crates where specified.- Perform other similar or less skilled work.- Follow all site safety rules listed in the associate handbook, cardinal rule cards, job specific standard work and any EHS training documents.- Report all chemical spills and other environmental concerns to their supervisor, security or EHS immediately.Working hours: Various Shifts AvailableSkills:- Must be able to work from simple drawings.- Must be able to follow sequence of operations and exercise some judgement in making of minor decisions.- Must be able to read and write, and add and subtract whole numbers.Education:High SchoolExperience:1-4 yearsQualifications:- Must have a high school diploma, GED or equivalent qualification- Must be available to work on 1st shift or 2nd shift - Must pass a background check, drug screen and physical If interested, Apply Today! Once you apply, call or text 317-843-2512 to schedule your orientation.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring Production Associates to begin work immediately in Indianapolis, IN!This is a Direct Hire Opportunity! 1st shift: 6am to 4:30pm $18.20/hr2nd Shift: 5pm-3:30am $18.40/hr(Need to be flexible for both)SUMMARYUnder general direct supervision perform assembly, wiring, adjusting or testing operations in the construction of furnaces, air conditioners and associated components. Works from simple drawings, employing small hand tools and pneumatic drill motors and drivers on repetitive diversified operationsResponsibilities:- Assembling tubing and pipe fittings.- Assembling fabricated sheet metal parts.- Assembling motors, shafts and fan assemblies.- Stripping wires, forming, soldering and assembling small electrical components.- Cutting and forming tubes.- Testing and adjusting to meet operating specifications.- Packing units in cartons or crates where specified.- Perform other similar or less skilled work.- Follow all site safety rules listed in the associate handbook, cardinal rule cards, job specific standard work and any EHS training documents.- Report all chemical spills and other environmental concerns to their supervisor, security or EHS immediately.Working hours: Various Shifts AvailableSkills:- Must be able to work from simple drawings.- Must be able to follow sequence of operations and exercise some judgement in making of minor decisions.- Must be able to read and write, and add and subtract whole numbers.Education:High SchoolExperience:1-4 yearsQualifications:- Must have a high school diploma, GED or equivalent qualification- Must be available to work on 1st shift or 2nd shift - Must pass a background check, drug screen and physical If interested, Apply Today! Once you apply, call or text 317-843-2512 to schedule your orientation.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Indianapolis, Indiana
      • Permanent
      • $18.20 - $18.40 per hour
      • Various Shifts Available
      Spherion is hiring Production Associates to begin work immediately in Indianapolis, IN!This is a Direct Hire Opportunity! 1st shift: 6am to 4:30pm $18.20/hr2nd Shift: 5pm-3:30am $18.40/hr(Need to be flexible for both)SUMMARYUnder general direct supervision perform assembly, wiring, adjusting or testing operations in the construction of furnaces, air conditioners and associated components. Works from simple drawings, employing small hand tools and pneumatic drill motors and drivers on repetitive diversified operationsResponsibilities:- Assembling tubing and pipe fittings.- Assembling fabricated sheet metal parts.- Assembling motors, shafts and fan assemblies.- Stripping wires, forming, soldering and assembling small electrical components.- Cutting and forming tubes.- Testing and adjusting to meet operating specifications.- Packing units in cartons or crates where specified.- Perform other similar or less skilled work.- Follow all site safety rules listed in the associate handbook, cardinal rule cards, job specific standard work and any EHS training documents.- Report all chemical spills and other environmental concerns to their supervisor, security or EHS immediately.Working hours: Various Shifts AvailableSkills:- Must be able to work from simple drawings.- Must be able to follow sequence of operations and exercise some judgement in making of minor decisions.- Must be able to read and write, and add and subtract whole numbers.Education:High SchoolExperience:1-4 yearsQualifications:- Must have a high school diploma, GED or equivalent qualification- Must be available to work on 1st shift or 2nd shift - Must pass a background check, drug screen and physical If interested, Apply Today! Once you apply, call or text 317-843-2512 to schedule your orientation.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring Production Associates to begin work immediately in Indianapolis, IN!This is a Direct Hire Opportunity! 1st shift: 6am to 4:30pm $18.20/hr2nd Shift: 5pm-3:30am $18.40/hr(Need to be flexible for both)SUMMARYUnder general direct supervision perform assembly, wiring, adjusting or testing operations in the construction of furnaces, air conditioners and associated components. Works from simple drawings, employing small hand tools and pneumatic drill motors and drivers on repetitive diversified operationsResponsibilities:- Assembling tubing and pipe fittings.- Assembling fabricated sheet metal parts.- Assembling motors, shafts and fan assemblies.- Stripping wires, forming, soldering and assembling small electrical components.- Cutting and forming tubes.- Testing and adjusting to meet operating specifications.- Packing units in cartons or crates where specified.- Perform other similar or less skilled work.- Follow all site safety rules listed in the associate handbook, cardinal rule cards, job specific standard work and any EHS training documents.- Report all chemical spills and other environmental concerns to their supervisor, security or EHS immediately.Working hours: Various Shifts AvailableSkills:- Must be able to work from simple drawings.- Must be able to follow sequence of operations and exercise some judgement in making of minor decisions.- Must be able to read and write, and add and subtract whole numbers.Education:High SchoolExperience:1-4 yearsQualifications:- Must have a high school diploma, GED or equivalent qualification- Must be available to work on 1st shift or 2nd shift - Must pass a background check, drug screen and physical If interested, Apply Today! Once you apply, call or text 317-843-2512 to schedule your orientation.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Kalispell, Montana
      • Temp to Perm
      • $17.00 per hour
      • 6:00 AM - 4:30 PM
      Are you looking to learn a new trade as a machine operator? This entry-level position work is prescribed and completed with close supervision. Duties will be clearly defined, and methods and tasks are described in detail.Responsibilities:-Will safely operate at least one major shop tool (CNC Router, Laser, Water Jet, Sheet Metal Brake, Teflon Press, Manual Mill, or Manual Lathe) performing basic operations in producing prototype parts, production parts, modifications and repairs to existing parts and assemblies. -Supports in-house customers, such as manufacturing, engineering, business units. Portrays a customer service approach. Interfaces effectively and courteously with customers and co-workers. -Utilizes Work Orders, blueprints, sketches, written and verbal instructions to determine machining process, procedures, tooling and fixtures requirements. -Performs basic machining and/or assembly tasks utilizing standard machine shop equipment, such as surface grinders, drill presses, grinders, sanders, band saws, routers, and/or standard power tools. -Performs visual and dimensional inspections to verify compliance with specifications. Uses calipers, micrometers, gauges, indicators, and other inspection tools. Performs rework as necessary. -Maintains cleanliness of the work area and ensures proper handling of tools, equipment, and stock to prevent loss. Conforms to departmental safety requirements.Working hours: 6:00 AM - 4:30 PMSkills:-Familiar with standard machine shop equipment such as surface grinders, drill presses, grinders, sanders, band saws, routers, and/or standard power tools.-Must be willing to develop skills to perform basic, repetitive and manual activities in the jobEducation:High SchoolExperience:0-1 yearsQualifications:-Prior machining or machine shop experience is a plus-Ability to stand for 10 hours a day, 4 days a week.-Ability to pass a background check Dayshift available!Apply online at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you looking to learn a new trade as a machine operator? This entry-level position work is prescribed and completed with close supervision. Duties will be clearly defined, and methods and tasks are described in detail.Responsibilities:-Will safely operate at least one major shop tool (CNC Router, Laser, Water Jet, Sheet Metal Brake, Teflon Press, Manual Mill, or Manual Lathe) performing basic operations in producing prototype parts, production parts, modifications and repairs to existing parts and assemblies. -Supports in-house customers, such as manufacturing, engineering, business units. Portrays a customer service approach. Interfaces effectively and courteously with customers and co-workers. -Utilizes Work Orders, blueprints, sketches, written and verbal instructions to determine machining process, procedures, tooling and fixtures requirements. -Performs basic machining and/or assembly tasks utilizing standard machine shop equipment, such as surface grinders, drill presses, grinders, sanders, band saws, routers, and/or standard power tools. -Performs visual and dimensional inspections to verify compliance with specifications. Uses calipers, micrometers, gauges, indicators, and other inspection tools. Performs rework as necessary. -Maintains cleanliness of the work area and ensures proper handling of tools, equipment, and stock to prevent loss. Conforms to departmental safety requirements.Working hours: 6:00 AM - 4:30 PMSkills:-Familiar with standard machine shop equipment such as surface grinders, drill presses, grinders, sanders, band saws, routers, and/or standard power tools.-Must be willing to develop skills to perform basic, repetitive and manual activities in the jobEducation:High SchoolExperience:0-1 yearsQualifications:-Prior machining or machine shop experience is a plus-Ability to stand for 10 hours a day, 4 days a week.-Ability to pass a background check Dayshift available!Apply online at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Sparks, Nevada
      • Temp to Perm
      • $19.00 - $23.00 per hour
      • 7:00 AM - 4:30 PM
      Spherion Staffing Reno, NV is recruiting for a sewing machine operator/upholsterer position for manufacturing facility in Sparks, NV off Vista Blvd.The Upholsterer builds assemblies to specified bill of materials.They need to have sound hand-eye coordination and be able to cope with moderate physical effort.All Upholstery employees will be classified and evaluated according to the Tier system based on skills. The Upholsterer position is a safety sensitive position.Responsibilities:Can read an order accurately and follow build instructions/line drawingsBuilds assemblies to specified bill of materials (BOM)PrepSteam out imperfectionApply seat pan and appropriate sticker(s)Apply J-bar and back shellAssembly arms for various stylesApply arms to seatApply slider to seatAdhere to all safety policies and practicesAdditional duties as assigned based on skills and knowledgeWorking hours: 7:00 AM - 4:30 PMSkills:An individual should demonstrate the following competencies to perform the essential functions of this position successfully.Time Management - Managing one's own time under the guidelines of the department supervisor to accomplish daily production goalsCritical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problemsActive Listener - Gives full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.Quality control-demonstrates accuracy, thoroughness and monitors own work to ensure qualityAdaptability-adapts to changes in the work environment and able to deal with change, delays or unexpected eventsDependability-consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performanceSafety and security-the individual actively promotes and personally observes safety and security procedures, and uses equipment and materials properlyEducation:No Degree RequiredExperience:1-4 yearsQualifications:A high school diploma/degree or GED is preferredExperience working at manufacturing facility combined with a willingness to learn a new skills set will be considered as commensurate with any of the above qualifications for any internal transfers.Physical Demands:Vision, hearing and speaking to meet performance standardAbility to read and interpret documents such as safety rules, operating, maintenance instructions, and procedure manuals.Required to stand for long periods of time and to walk frequently.The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.The employee must frequently lift and/or move up to 50 pounds.Work Environment:Typical production area in an environment that contains dust, odors, moderate level noise, and temperature & ventilation variations while wearing safety glasses Spherion Staffing Reno, NV is recruiting for a temp to hire opportunity for Sparks, NV manufacturing facility.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing Reno, NV is recruiting for a sewing machine operator/upholsterer position for manufacturing facility in Sparks, NV off Vista Blvd.The Upholsterer builds assemblies to specified bill of materials.They need to have sound hand-eye coordination and be able to cope with moderate physical effort.All Upholstery employees will be classified and evaluated according to the Tier system based on skills. The Upholsterer position is a safety sensitive position.Responsibilities:Can read an order accurately and follow build instructions/line drawingsBuilds assemblies to specified bill of materials (BOM)PrepSteam out imperfectionApply seat pan and appropriate sticker(s)Apply J-bar and back shellAssembly arms for various stylesApply arms to seatApply slider to seatAdhere to all safety policies and practicesAdditional duties as assigned based on skills and knowledgeWorking hours: 7:00 AM - 4:30 PMSkills:An individual should demonstrate the following competencies to perform the essential functions of this position successfully.Time Management - Managing one's own time under the guidelines of the department supervisor to accomplish daily production goalsCritical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problemsActive Listener - Gives full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.Quality control-demonstrates accuracy, thoroughness and monitors own work to ensure qualityAdaptability-adapts to changes in the work environment and able to deal with change, delays or unexpected eventsDependability-consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performanceSafety and security-the individual actively promotes and personally observes safety and security procedures, and uses equipment and materials properlyEducation:No Degree RequiredExperience:1-4 yearsQualifications:A high school diploma/degree or GED is preferredExperience working at manufacturing facility combined with a willingness to learn a new skills set will be considered as commensurate with any of the above qualifications for any internal transfers.Physical Demands:Vision, hearing and speaking to meet performance standardAbility to read and interpret documents such as safety rules, operating, maintenance instructions, and procedure manuals.Required to stand for long periods of time and to walk frequently.The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.The employee must frequently lift and/or move up to 50 pounds.Work Environment:Typical production area in an environment that contains dust, odors, moderate level noise, and temperature & ventilation variations while wearing safety glasses Spherion Staffing Reno, NV is recruiting for a temp to hire opportunity for Sparks, NV manufacturing facility.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Reading, Pennsylvania
      • Permanent
      • $19.00 per hour
      • 7:00 AM - 7:00 PM (Various Shifts Available)
      The Injection Molding Utility-Quality Inspector is responsible for handling materials and general/basic operation and upkeep of machinery in the mold shop.Responsibilities:Ensures all safety procedures are followed and actively works to improve our safety program.Ensures all quality procedures are followed and actively works to improve our quality program.Follows all procedures & work instructionsWorks to maintain a clean & organized working environment (5s)The requirements for completing the quality check procedures in the Molding Department will consist primarily of one - full part inspections for all running machines, visual inspections of parts on all machines, end box inspectionsConduct molding department first piece checks within 15 minutes of receipt of email notification (when possible)Conduct daily tensile testing on all automotive links to verify they meet mechanical requirementsConduct pitch testing of links dailyCommunicate deviations, concerns, process improvement suggestions to both the Molding Manager and Quality ManagerComplete all required paperwork and documentation as instructed and enter data into manufacturing systems and/or databasesMaintain a positive attitude and strong work ethic meeting the high standard required of all personnelMaintain quality of daily activities- (thoroughly investigates issues, uses sound judgement, etc.)Notify the Quality Manager and Production Manager of any deviations that will affect the assembly of and shipping of an order on time. (email address will be provided)Work overtime when required and necessaryOther duties as assignedWorking hours: 7:00 AM - 7:00 PM (Various Shifts Available)Skills:Must be able to work in the USMust be an effective communicatorAbility to use measuring equipment such as calipers, micrometers and tape measuresFamiliarity with MSOffice SuiteHigh School Diploma or equivalentEducation:High SchoolExperience:1-4 yearsQualifications:Detail orientedCommunicates effectivelyWorks well within a Team environmentMust be able to complete tasks effectively, efficiently and accurately with exceptional attention to detailAbility to frequently lift up to 55 pounds.This position is very active and requires frequent standing, walking, bending, kneeling, stooping, crouching, crawling, climbing; use of hands to finger, handle or feel, reach with hands and arms.This position requires frequent communications with other employees. Must be able to exchange accurate information in these situations.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Looking for a positive, motivated individual that wants to join a talented Team in a company currently undergoing a large expansion project - NEW MACHINES, NEW TECHNOLOGY, NEW FACILITY!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Injection Molding Utility-Quality Inspector is responsible for handling materials and general/basic operation and upkeep of machinery in the mold shop.Responsibilities:Ensures all safety procedures are followed and actively works to improve our safety program.Ensures all quality procedures are followed and actively works to improve our quality program.Follows all procedures & work instructionsWorks to maintain a clean & organized working environment (5s)The requirements for completing the quality check procedures in the Molding Department will consist primarily of one - full part inspections for all running machines, visual inspections of parts on all machines, end box inspectionsConduct molding department first piece checks within 15 minutes of receipt of email notification (when possible)Conduct daily tensile testing on all automotive links to verify they meet mechanical requirementsConduct pitch testing of links dailyCommunicate deviations, concerns, process improvement suggestions to both the Molding Manager and Quality ManagerComplete all required paperwork and documentation as instructed and enter data into manufacturing systems and/or databasesMaintain a positive attitude and strong work ethic meeting the high standard required of all personnelMaintain quality of daily activities- (thoroughly investigates issues, uses sound judgement, etc.)Notify the Quality Manager and Production Manager of any deviations that will affect the assembly of and shipping of an order on time. (email address will be provided)Work overtime when required and necessaryOther duties as assignedWorking hours: 7:00 AM - 7:00 PM (Various Shifts Available)Skills:Must be able to work in the USMust be an effective communicatorAbility to use measuring equipment such as calipers, micrometers and tape measuresFamiliarity with MSOffice SuiteHigh School Diploma or equivalentEducation:High SchoolExperience:1-4 yearsQualifications:Detail orientedCommunicates effectivelyWorks well within a Team environmentMust be able to complete tasks effectively, efficiently and accurately with exceptional attention to detailAbility to frequently lift up to 55 pounds.This position is very active and requires frequent standing, walking, bending, kneeling, stooping, crouching, crawling, climbing; use of hands to finger, handle or feel, reach with hands and arms.This position requires frequent communications with other employees. Must be able to exchange accurate information in these situations.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Looking for a positive, motivated individual that wants to join a talented Team in a company currently undergoing a large expansion project - NEW MACHINES, NEW TECHNOLOGY, NEW FACILITY!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Madison, Wisconsin
      • Temp to Perm
      • $22.00 per hour
      • Various Shifts Available
      1st and 2nd shifts available!Spherion is recruiting a Production Technician for our client! This innovative company develops, manufactures and sells radiotherapy systems for alternative cancer treatments. The Production Technician is responsible for assembling, testing, and shipping activities that will allow the company to provide products that meet customer needs and in accordance with regulatory requirements. This position reports to the Production Supervisor.Responsibilities:- Assembly and manufacture of product, in accordance with quality system requirements, manufacturing procedures, and manufacturing instructions- Perform or assist in received materials, in-process product, and final product inspection/test- Participate in development and review of manufacturing procedures to help ensure manufacturing requirements and goals are achieved- Assist in development of manufacturing instructions that document and control the manufacturing process- Assist the development of manufacturing tool and fixture requirements, and promote ongoing control- Assist the training of manufacturing area personnel, as required- Assist in deployment of product changes to ensure correct implementation- Assist the development of facility requirements to accommodate production, including workflow, shelving, other storage, and workstations- Assist review of packaging and shipping requirements so the product can be transported to the customer without damage- Assist operation of the Material Rejection Area (MRA) to promote resolution of material issues, including the promotion of timely corrective action by the supplier(s)- Provide feedback to Engineering personnel concerning manufacturing needs and product enhancements that would improve both quality and ease of manufacturing/servicing of the product- Interface and support regulatory affairs as required to help ensure production processes and facilities are in accordance with FDA, OSHA and other applicable regulations- Implementation and use of special facility controls that may be required, for example ESD, cleanliness, etc.- Ensure safety and quality considerations and requirements are pro-actively addressed and implemented in product production processes- Assist in the timely resolution of safety and quality issues raised by customers or staff- Supports the companys Quality System and Safety and Health Program by following procedures and advising othersWorking hours: Various Shifts AvailableSkills:- Experience in interpretation and use of product design drawings and related documentation- Experience in the operation of heavily documented and controlled production processes- Experience in product testing and understanding of calibration control- Experience in ESD and cleanliness special control processes- Good written and verbal communication skills, with all levels of employees, suppliers, and customers are preferred- Experience with personal computer systems, including word processing, spreadsheet reports, and E-mail- Experience with safety and health (OSHA), FDA and ISO 9001 quality system requirements- Must regularly lift and/or move physical inventory weighing up to 75 pounds- Frequently required to climb ladders, kneel, crouch, or crawl as required during the manufacturing, inspection, and testing of components and products- Must be able to spend long periods of time standingEducation:High SchoolExperience:1-4 yearsQualifications:- Associate degree in a production, manufacturing engineering, general engineering field, or at least three years experience working in manufacturing or engineering activities Apply via the Apply button in the top right hand corner today!Spherion has helped thousands of people just like you find work happiness! Our experienced staf
      1st and 2nd shifts available!Spherion is recruiting a Production Technician for our client! This innovative company develops, manufactures and sells radiotherapy systems for alternative cancer treatments. The Production Technician is responsible for assembling, testing, and shipping activities that will allow the company to provide products that meet customer needs and in accordance with regulatory requirements. This position reports to the Production Supervisor.Responsibilities:- Assembly and manufacture of product, in accordance with quality system requirements, manufacturing procedures, and manufacturing instructions- Perform or assist in received materials, in-process product, and final product inspection/test- Participate in development and review of manufacturing procedures to help ensure manufacturing requirements and goals are achieved- Assist in development of manufacturing instructions that document and control the manufacturing process- Assist the development of manufacturing tool and fixture requirements, and promote ongoing control- Assist the training of manufacturing area personnel, as required- Assist in deployment of product changes to ensure correct implementation- Assist the development of facility requirements to accommodate production, including workflow, shelving, other storage, and workstations- Assist review of packaging and shipping requirements so the product can be transported to the customer without damage- Assist operation of the Material Rejection Area (MRA) to promote resolution of material issues, including the promotion of timely corrective action by the supplier(s)- Provide feedback to Engineering personnel concerning manufacturing needs and product enhancements that would improve both quality and ease of manufacturing/servicing of the product- Interface and support regulatory affairs as required to help ensure production processes and facilities are in accordance with FDA, OSHA and other applicable regulations- Implementation and use of special facility controls that may be required, for example ESD, cleanliness, etc.- Ensure safety and quality considerations and requirements are pro-actively addressed and implemented in product production processes- Assist in the timely resolution of safety and quality issues raised by customers or staff- Supports the companys Quality System and Safety and Health Program by following procedures and advising othersWorking hours: Various Shifts AvailableSkills:- Experience in interpretation and use of product design drawings and related documentation- Experience in the operation of heavily documented and controlled production processes- Experience in product testing and understanding of calibration control- Experience in ESD and cleanliness special control processes- Good written and verbal communication skills, with all levels of employees, suppliers, and customers are preferred- Experience with personal computer systems, including word processing, spreadsheet reports, and E-mail- Experience with safety and health (OSHA), FDA and ISO 9001 quality system requirements- Must regularly lift and/or move physical inventory weighing up to 75 pounds- Frequently required to climb ladders, kneel, crouch, or crawl as required during the manufacturing, inspection, and testing of components and products- Must be able to spend long periods of time standingEducation:High SchoolExperience:1-4 yearsQualifications:- Associate degree in a production, manufacturing engineering, general engineering field, or at least three years experience working in manufacturing or engineering activities Apply via the Apply button in the top right hand corner today!Spherion has helped thousands of people just like you find work happiness! Our experienced staf
      • Lebanon, New Jersey
      • Temp to Perm
      • $15.00 - $16.00 per hour
      • 7:00 AM - 3:30 PM
      The Production Assembler position helps in performing all tasks involved in the production of the company's products including manufacturing, assembly, and/or packaging of products. All technicians carry out the production process by closely following the standard operating procedures as they relate to materials handling, equipment operation, and finished goods packaging. This position follows standard work methods and practices safe work habits to ensure production is as efficient and safe as possible.Hours:- 1st Shift: 7:00am - 3:30pm- 2nd Shift: 3:00pm-12:00amLocation:- Lebanon, NJ.- Branchburg, NJ.Responsibilities:- Ability to learn how to follow complex procedures- Read draft drawings of products and perform work as assigned by Production Manager- Adherence to good manufacturing principles- Ability to work with hands to assemble products ? must have good hand dexterity- Inspection of in-process and finished product ? must have 20/20 corrected vision- Pack finished goods into correct packages and boxes- Attach appropriate labels and tags to products and packages- Place finished good on designated pallet or where specifically instructed to place- Must have ability to work well with others- Ability to lift up to 25 lbs. on occasional basis- Must be able to stand long periods of time when necessaryWorking hours: 7:00 AM - 3:30 PMSkills:- Able to read and write in basic english- Good dexirity (Hand/eye coordination)- Needs to be 20/20 corrected vision if they have glasses- Cannot be smokers- Can work in a Sterile EnviromentEducation:High SchoolExperience:1-4 yearsQualifications:- Minimum of a High School diploma- Prior Cleanroom experience preferred but not necessary- Work Authorization- Must be able to legally work in the US Spherion?s local offices are waiting to hear from you today!Apply online today or text 609-734-0003 to schedule an interview with a recruiter today! We can?t wait to hear from you!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Production Assembler position helps in performing all tasks involved in the production of the company's products including manufacturing, assembly, and/or packaging of products. All technicians carry out the production process by closely following the standard operating procedures as they relate to materials handling, equipment operation, and finished goods packaging. This position follows standard work methods and practices safe work habits to ensure production is as efficient and safe as possible.Hours:- 1st Shift: 7:00am - 3:30pm- 2nd Shift: 3:00pm-12:00amLocation:- Lebanon, NJ.- Branchburg, NJ.Responsibilities:- Ability to learn how to follow complex procedures- Read draft drawings of products and perform work as assigned by Production Manager- Adherence to good manufacturing principles- Ability to work with hands to assemble products ? must have good hand dexterity- Inspection of in-process and finished product ? must have 20/20 corrected vision- Pack finished goods into correct packages and boxes- Attach appropriate labels and tags to products and packages- Place finished good on designated pallet or where specifically instructed to place- Must have ability to work well with others- Ability to lift up to 25 lbs. on occasional basis- Must be able to stand long periods of time when necessaryWorking hours: 7:00 AM - 3:30 PMSkills:- Able to read and write in basic english- Good dexirity (Hand/eye coordination)- Needs to be 20/20 corrected vision if they have glasses- Cannot be smokers- Can work in a Sterile EnviromentEducation:High SchoolExperience:1-4 yearsQualifications:- Minimum of a High School diploma- Prior Cleanroom experience preferred but not necessary- Work Authorization- Must be able to legally work in the US Spherion?s local offices are waiting to hear from you today!Apply online today or text 609-734-0003 to schedule an interview with a recruiter today! We can?t wait to hear from you!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Watertown, South Dakota
      • Permanent
      • $17.00 - $20.00 per hour
      • 6:00 AM - 2:30 PM
      Spherion Staffing has several openings for Production Technicians. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in a clean and safe production environment.Responsibilities:Job Duties:Perform work as apparent or assigned. This might include but is not limited to the following activities:Assemble products per specifications and prescribed procedures.Set up and operate machines, processes or equipment. Monitor life of tooling and sharpen toolsPerform inspections, tests and audits on processes, products and components. Diagnose faults, conduct repairs, and utilize appropriate measuring, inspection and test equipment and procedures to assure consistency in parts produced.Insure that all parts meet specifications, finishes and special handling requirements utilizing appropriate documentation.Utilize proper storage, handling and disposal methods of all materials, including hazardous material when applicable.Assist in maintaining department supplies and consumables.Assist in the operation of the waste water treatment system to ensure effluents meet EPA parameters. Assist with the filing of all required EPA reporting.Supports the department and continuous improvement concepts by suggesting changes and improvements.Keep department and machines clean and orderly, and maintain housekeeping requirements.Perform work in a safe manner by following safety rules and insuring that proper safety equipment is used.Troubleshoot, maintain and perform routine maintenance / preventative maintenance on department machines and equipment. Maintain department records per established procedures.Seeks and recommends ways to eliminate potential quality problems, to improve procedures and methods, and to increase productivity using the Quality Management System (policy, procedure, work instructions).Working hours: 6:00 AM - 2:30 PMSkills:see aboveEducation:High SchoolExperience:0-1 yearsQualifications:Qualifications:High school diploma or GED.Physical ability to lift, carry and maneuver 65 pounds. Physical ability to stand all day.Demonstrated ability to read and interpret all applicable blueprints, schematics and diagrams.Demonstrated ability to work in a cooperative and team oriented environment.Demonstrated ability to communicate (verbal/written) effectively with customers, suppliers and other employees. To be considered for this position please call or email Greg Stafford 605-335-6010 or gregorystafford@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has several openings for Production Technicians. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in a clean and safe production environment.Responsibilities:Job Duties:Perform work as apparent or assigned. This might include but is not limited to the following activities:Assemble products per specifications and prescribed procedures.Set up and operate machines, processes or equipment. Monitor life of tooling and sharpen toolsPerform inspections, tests and audits on processes, products and components. Diagnose faults, conduct repairs, and utilize appropriate measuring, inspection and test equipment and procedures to assure consistency in parts produced.Insure that all parts meet specifications, finishes and special handling requirements utilizing appropriate documentation.Utilize proper storage, handling and disposal methods of all materials, including hazardous material when applicable.Assist in maintaining department supplies and consumables.Assist in the operation of the waste water treatment system to ensure effluents meet EPA parameters. Assist with the filing of all required EPA reporting.Supports the department and continuous improvement concepts by suggesting changes and improvements.Keep department and machines clean and orderly, and maintain housekeeping requirements.Perform work in a safe manner by following safety rules and insuring that proper safety equipment is used.Troubleshoot, maintain and perform routine maintenance / preventative maintenance on department machines and equipment. Maintain department records per established procedures.Seeks and recommends ways to eliminate potential quality problems, to improve procedures and methods, and to increase productivity using the Quality Management System (policy, procedure, work instructions).Working hours: 6:00 AM - 2:30 PMSkills:see aboveEducation:High SchoolExperience:0-1 yearsQualifications:Qualifications:High school diploma or GED.Physical ability to lift, carry and maneuver 65 pounds. Physical ability to stand all day.Demonstrated ability to read and interpret all applicable blueprints, schematics and diagrams.Demonstrated ability to work in a cooperative and team oriented environment.Demonstrated ability to communicate (verbal/written) effectively with customers, suppliers and other employees. To be considered for this position please call or email Greg Stafford 605-335-6010 or gregorystafford@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Muncy, Pennsylvania
      • Permanent
      • 2pm-1130pm
      Person fabricates, constructs, erects, installs and repairs products that are comprised primarily of wood and plastics. The performance of this work shall be in accordance with the following essential duties and responsibilities. 
      Person fabricates, constructs, erects, installs and repairs products that are comprised primarily of wood and plastics. The performance of this work shall be in accordance with the following essential duties and responsibilities. 
      • Madison, Wisconsin
      • Temp to Perm
      • $22.00 per hour
      • Various Shifts Available
      1st and 2nd shifts available!Spherion is recruiting a Test Technician for our client! This innovative company develops, manufactures and sells radiotherapy systems for alternative cancer treatments. The Test Technician is responsible for manufacturing and shipping activities that will allow the company to provide products that meet customer needs and in accordance with regulatory requirements. This position is offered for assembly and test operations in our electronics department. Key qualifications for this role include experience with oscilloscopes, DMM and other electronic test equipment.Responsibilities:- Perform or assist in received materials, in-process product, and final product inspection/test- Participate in the development and review of manufacturing procedures to help ensure manufacturing requirements and goals are achieved- Assist in the development of manufacturing instructions, that document and control the manufacturing process- Assist the development of manufacturing tool and fixture requirements, and promote ongoing control- Assist the training of manufacturing area personnel, as required- Assist in deployment of product changes (CNs) to ensure correct implementation- Assist the development of facility requirements to accommodate production, including workflow, shelving, other storage, and workstations- Assist review of packaging and shipping requirements so the product can be transported to the customer without damage- Assist operation of the Material Rejection Area (MRA) to promote resolution of material issues, including the promotion of timely corrective action by the supplier(s)- Provide feedback to Engineering personnel concerning manufacturing needs and product enhancements that would improve both quality and ease of manufacturing/servicing of the product- Interface and support regulatory affairs as required to help ensure production processes and facilities are in accordance with FDA, OSHA and other applicable regulations- Implementation and use of special facility controls that may be required, for example, ESD, cleanliness, etc.- Ensure safety and quality considerations and requirements are proactively addressed and implemented in product production processes- Assist in the timely resolution of safety and quality issues raised by customers or staff.- Supports the companys Quality System and Safety and Health Program by following procedures and advising othersWorking hours: Various Shifts AvailableSkills:- Experience in interpretation and use of product design drawings and related documentation- Experience with personal computer systems, as well as Windows OS and related applications- Experience in the operation of heavily documented and controlled production processes- Experience in product testing and understanding of calibration control- Experience in ESD and cleanliness special control processes- Familiarity and experience with oscilloscopes, DMM and other electronic test equipment- Experience with safety and health (OSHA), FDA and ISO 9001 quality system requirements- Good written and verbal communication skills, with all levels of employees, suppliers, and customers is preferred- Must regularly lift and/or move physical inventory weighing up to 75 pounds- Frequently required to climb ladders, kneel, crouch, or crawl as required during the manufacturing, inspection, and testing of components and products- Must be able to spend long periods of time standingEducation:High SchoolExperience:1-4 yearsQualifications:- Associates or Technical degree in Electronics, Computer Technology, or related discipline is required- Three years experience working in manufacturing test or engineering activities required Apply via the Apply button in the top right hand corner today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      1st and 2nd shifts available!Spherion is recruiting a Test Technician for our client! This innovative company develops, manufactures and sells radiotherapy systems for alternative cancer treatments. The Test Technician is responsible for manufacturing and shipping activities that will allow the company to provide products that meet customer needs and in accordance with regulatory requirements. This position is offered for assembly and test operations in our electronics department. Key qualifications for this role include experience with oscilloscopes, DMM and other electronic test equipment.Responsibilities:- Perform or assist in received materials, in-process product, and final product inspection/test- Participate in the development and review of manufacturing procedures to help ensure manufacturing requirements and goals are achieved- Assist in the development of manufacturing instructions, that document and control the manufacturing process- Assist the development of manufacturing tool and fixture requirements, and promote ongoing control- Assist the training of manufacturing area personnel, as required- Assist in deployment of product changes (CNs) to ensure correct implementation- Assist the development of facility requirements to accommodate production, including workflow, shelving, other storage, and workstations- Assist review of packaging and shipping requirements so the product can be transported to the customer without damage- Assist operation of the Material Rejection Area (MRA) to promote resolution of material issues, including the promotion of timely corrective action by the supplier(s)- Provide feedback to Engineering personnel concerning manufacturing needs and product enhancements that would improve both quality and ease of manufacturing/servicing of the product- Interface and support regulatory affairs as required to help ensure production processes and facilities are in accordance with FDA, OSHA and other applicable regulations- Implementation and use of special facility controls that may be required, for example, ESD, cleanliness, etc.- Ensure safety and quality considerations and requirements are proactively addressed and implemented in product production processes- Assist in the timely resolution of safety and quality issues raised by customers or staff.- Supports the companys Quality System and Safety and Health Program by following procedures and advising othersWorking hours: Various Shifts AvailableSkills:- Experience in interpretation and use of product design drawings and related documentation- Experience with personal computer systems, as well as Windows OS and related applications- Experience in the operation of heavily documented and controlled production processes- Experience in product testing and understanding of calibration control- Experience in ESD and cleanliness special control processes- Familiarity and experience with oscilloscopes, DMM and other electronic test equipment- Experience with safety and health (OSHA), FDA and ISO 9001 quality system requirements- Good written and verbal communication skills, with all levels of employees, suppliers, and customers is preferred- Must regularly lift and/or move physical inventory weighing up to 75 pounds- Frequently required to climb ladders, kneel, crouch, or crawl as required during the manufacturing, inspection, and testing of components and products- Must be able to spend long periods of time standingEducation:High SchoolExperience:1-4 yearsQualifications:- Associates or Technical degree in Electronics, Computer Technology, or related discipline is required- Three years experience working in manufacturing test or engineering activities required Apply via the Apply button in the top right hand corner today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Evans, Georgia
      • Temporary
      • $35.00 - $38.00 per hour
      • 7:00 AM - 3:00 PM
      Growing Columbia County manufacturing facility is adding to the team! If you're eager to join an organization where you'll be designing tooling, fixtures, and machines for manufacturing operations that are safe, high quality, manufacture-able, accurate and meet project scope error-free, then this is the position you've been searching for!.In this position you will design and implement tooling, fixturing, and machinery to support new process development and continuous improvement projects. This position will collaborate with manufacturing engineering teams to develop equipment solutions for assembly and manufacturing. In addition, you will responsible for researching new technologies and innovations in order to implement cost effective and efficient solutions. If you thrive when responsible for managing project deadlines for both the tool & equipment design team as well as the tool and die department, read on to learn more.Responsibilities include:Coordinate the repair, rebuild and improvement of tooling, fixturing, and machineryResponsible for quoting and project deadlines for new tooling and equipment design projects.Reviews and approves designs, drawings, details, etc. at the group level. Specifies, requisitions, and buys tooling materials and components. Expedites tooling projects to insure their timely completion.Performs as liaison, when assigned, with equipment manufacturers, sub-contractors and tooling service firms engaged by the company.Support NPD and continuous improvement projects by collaborating with engineering and operations teams to ensure project deadlines are achievedProvides engineering assistance during tool construction and initial tool tryout and debug. Ensures that tools are dimensionally verified and are production ready when released.Establish process for design request and direct equipment design and tool and die team prioritiesKeeps abreast of new developments in the field of tooling, applications and methods. Recommends the adoption of innovations when applications are feasible to improve quality and production or reduce manufacturing costs.Maintain tool drawing file to insure that all tool designs are maintained in as-built status in accordance to QSP-0096Must be able to manage multiple projects concurrentlyWorking hours: 7:00 AM - 3:00 PMSkills:The ideal candidate:--Ability to manage multiple projects with time sensitivity--Creativity in problem solving--Proven ability to meet deadlines--Clear communicator and can convert complex ideas into designs--Strong collaborationEducation:AssociateExperience:4-7 yearsQualifications:Qualified candidates should possess:--Min two-year degree required--5+ years of experience as a tool & die or equipment designer--Must be proficient in the use of CAD--Pro E software experience preferred--Strong background in die/fixture design, metal working materials, mechanics, and heat treating--Required experience and familiarity with CNC machine tools and parts making--Preferred experience with WindchillDon't delay, submit your resume and application today: www.spherion.com/apply/75751Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Growing Columbia County manufacturing facility is adding to the team! If you're eager to join an organization where you'll be designing tooling, fixtures, and machines for manufacturing operations that are safe, high quality, manufacture-able, accurate and meet project scope error-free, then this is the position you've been searching for!.In this position you will design and implement tooling, fixturing, and machinery to support new process development and continuous improvement projects. This position will collaborate with manufacturing engineering teams to develop equipment solutions for assembly and manufacturing. In addition, you will responsible for researching new technologies and innovations in order to implement cost effective and efficient solutions. If you thrive when responsible for managing project deadlines for both the tool & equipment design team as well as the tool and die department, read on to learn more.Responsibilities include:Coordinate the repair, rebuild and improvement of tooling, fixturing, and machineryResponsible for quoting and project deadlines for new tooling and equipment design projects.Reviews and approves designs, drawings, details, etc. at the group level. Specifies, requisitions, and buys tooling materials and components. Expedites tooling projects to insure their timely completion.Performs as liaison, when assigned, with equipment manufacturers, sub-contractors and tooling service firms engaged by the company.Support NPD and continuous improvement projects by collaborating with engineering and operations teams to ensure project deadlines are achievedProvides engineering assistance during tool construction and initial tool tryout and debug. Ensures that tools are dimensionally verified and are production ready when released.Establish process for design request and direct equipment design and tool and die team prioritiesKeeps abreast of new developments in the field of tooling, applications and methods. Recommends the adoption of innovations when applications are feasible to improve quality and production or reduce manufacturing costs.Maintain tool drawing file to insure that all tool designs are maintained in as-built status in accordance to QSP-0096Must be able to manage multiple projects concurrentlyWorking hours: 7:00 AM - 3:00 PMSkills:The ideal candidate:--Ability to manage multiple projects with time sensitivity--Creativity in problem solving--Proven ability to meet deadlines--Clear communicator and can convert complex ideas into designs--Strong collaborationEducation:AssociateExperience:4-7 yearsQualifications:Qualified candidates should possess:--Min two-year degree required--5+ years of experience as a tool & die or equipment designer--Must be proficient in the use of CAD--Pro E software experience preferred--Strong background in die/fixture design, metal working materials, mechanics, and heat treating--Required experience and familiarity with CNC machine tools and parts making--Preferred experience with WindchillDon't delay, submit your resume and application today: www.spherion.com/apply/75751Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Montgomery, Pennsylvania
      • Temporary
      • 6am-430pm
      We are currently hiring for Welders in Montgomery. Joins, fabricates, and repairs metal and other weld able material by applying appropriate welding techniques. Interprets blueprints, specifications and diagrams to determine appropriate welding process. Inspects completed welds to determine structural soundness.
      We are currently hiring for Welders in Montgomery. Joins, fabricates, and repairs metal and other weld able material by applying appropriate welding techniques. Interprets blueprints, specifications and diagrams to determine appropriate welding process. Inspects completed welds to determine structural soundness.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.