You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    5 jobs found for Maintenance

    Filter2
    Clear all
      • Lebanon, Indiana
      • Permanent
      • $85,000 - $100,000 per year
      • Various Shifts Available
      Spherion is hiring a Maintenance and Reliability Engineer in Lebanon, IN. If you like traveling, this is the position for YOU!- Up to 80% travel- Bonuses- Opportunity to make your mark as a member of an Industry Leading company!Shift:Not a 40 hour a week shift, early starts/late finishes-closer to 60-70 hours a week with a lot of travel required, 80% travelPay: $85k - $100k + 15% BonusResponsibilities:Develop and support Maintenance Reliability Engineers Network/ enhance and roll out good practices/preventative and predictive maintenance across Division along with the implementation of SAP PM.Ensure good practices for all areas that preserve our assets functionality, reliability and integrity are developed and embedded within each site to deliver quicker on time in full, consistent qualitative and stronger products. Transfer Technical knowledge and support development of the organization, methods & tools towards more proactive (condition based) maintenance approach.Work with sites Maintenance Departments leads and Reliability Engineers in the roll out of these practices to prioritize maintenance work and improve reliability of our assets. Support complex troubleshooting and benchmark asset performance while developing the organization root cause analysis capabilities.Working hours: Various Shifts AvailableSkills:Education & Certicications:Master degree (preferable engineering, technology, process) or equivalent via experience.H&S (IOSH Managing Safely)Job Specific Technical Requirements:Corrugator or Converting Manufacturing Processes experienceEngineering qualificationsAdvocate for lean principles, proven lean transformation experience/ experience in lean change management & TPM ImplementationPassion for continuous improvement and strong will to deliver resultsAnalytical and conceptual skillsEducation:BachelorsExperience:1-4 yearsQualifications:Minimum 5 years in a position in a corrugated manufacturing environment (Engineering/Maintenance)Ability to work in/with/between various culturesProven experience in project management, project management skillsGood communication skills, able to work in a systematic and rigorous wayWorks collaboratively with others. Inspires to a common purpose.Strong leadership and coaching skills with the proven ability to set a vision, manage change, strategically plan for continuous improvement and the ability to influence people at all levels within the organizationFluent in English. Knowledge of other languages is a plus. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring a Maintenance and Reliability Engineer in Lebanon, IN. If you like traveling, this is the position for YOU!- Up to 80% travel- Bonuses- Opportunity to make your mark as a member of an Industry Leading company!Shift:Not a 40 hour a week shift, early starts/late finishes-closer to 60-70 hours a week with a lot of travel required, 80% travelPay: $85k - $100k + 15% BonusResponsibilities:Develop and support Maintenance Reliability Engineers Network/ enhance and roll out good practices/preventative and predictive maintenance across Division along with the implementation of SAP PM.Ensure good practices for all areas that preserve our assets functionality, reliability and integrity are developed and embedded within each site to deliver quicker on time in full, consistent qualitative and stronger products. Transfer Technical knowledge and support development of the organization, methods & tools towards more proactive (condition based) maintenance approach.Work with sites Maintenance Departments leads and Reliability Engineers in the roll out of these practices to prioritize maintenance work and improve reliability of our assets. Support complex troubleshooting and benchmark asset performance while developing the organization root cause analysis capabilities.Working hours: Various Shifts AvailableSkills:Education & Certicications:Master degree (preferable engineering, technology, process) or equivalent via experience.H&S (IOSH Managing Safely)Job Specific Technical Requirements:Corrugator or Converting Manufacturing Processes experienceEngineering qualificationsAdvocate for lean principles, proven lean transformation experience/ experience in lean change management & TPM ImplementationPassion for continuous improvement and strong will to deliver resultsAnalytical and conceptual skillsEducation:BachelorsExperience:1-4 yearsQualifications:Minimum 5 years in a position in a corrugated manufacturing environment (Engineering/Maintenance)Ability to work in/with/between various culturesProven experience in project management, project management skillsGood communication skills, able to work in a systematic and rigorous wayWorks collaboratively with others. Inspires to a common purpose.Strong leadership and coaching skills with the proven ability to set a vision, manage change, strategically plan for continuous improvement and the ability to influence people at all levels within the organizationFluent in English. Knowledge of other languages is a plus. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $74,000 - $90,000 per year
      • 8:00 AM - 5:00 PM
      You'll work with the Controls directly, but also work with a variety of teams and be a technical resource for our Maintenance, Operations, and IT teams. This includes enabling maintenance and operations to trouble shoot systems after initial setup.Responsibilities:Safety: You???ll complete an OSHA 10 class, attend monthly safety meetings and put your safety knowledge to work on the production floor. Directly impact our customers: Your solutions within our facility ensures we continue to exceed our customer expectations through on-time delivery and consistent processes.Working hours: 8:00 AM - 5:00 PMSkills:Experience in Lean Manufacturing. Ability to use Microsoft Excel, Word, and Outlook to effectively communicate with internal team members.Education:BachelorsExperience:1-4 yearsQualifications:Experience in programming, developing, configuring for PLC/HMI/SCADA. Experience in process control and automation. In addition, we are looking for an individual with a bachelor???s degree in Electrical Engineering, EET, or a related field. A combination of education and experience may be considered. This is a Direct Hire Opportunity! Please apply online or call and ask for Jennifer at 507-432-2430.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      You'll work with the Controls directly, but also work with a variety of teams and be a technical resource for our Maintenance, Operations, and IT teams. This includes enabling maintenance and operations to trouble shoot systems after initial setup.Responsibilities:Safety: You???ll complete an OSHA 10 class, attend monthly safety meetings and put your safety knowledge to work on the production floor. Directly impact our customers: Your solutions within our facility ensures we continue to exceed our customer expectations through on-time delivery and consistent processes.Working hours: 8:00 AM - 5:00 PMSkills:Experience in Lean Manufacturing. Ability to use Microsoft Excel, Word, and Outlook to effectively communicate with internal team members.Education:BachelorsExperience:1-4 yearsQualifications:Experience in programming, developing, configuring for PLC/HMI/SCADA. Experience in process control and automation. In addition, we are looking for an individual with a bachelor???s degree in Electrical Engineering, EET, or a related field. A combination of education and experience may be considered. This is a Direct Hire Opportunity! Please apply online or call and ask for Jennifer at 507-432-2430.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Alachua, Florida
      • Permanent
      • $31.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion Gainesville, FL has a client looking for a Manufacturing Engineer to be responsible for production, project management and engineering functions within manufacturing. The position includes oversight and maintenance of the manufacturing environment, equipment, and processes with the responsibility of producing safe and effective products on time and within budget. Let's get to work.Direct Hire Opportunity! Alachua, FL Schedule: FT, M-F, 8am - 5pmSalary: $31/hrResponsibilities:- Motivate/mentor technical staff, supporting strategic planning, resource planning and continuous improvement- Work with development and manufacturing team to optimize systems and processes for the orderly, safe, and efficient flow of manufacturing processes- Provide clear, consistent, and measurable direction regarding timelines and deliverables- Ensure the quality and integrity of production and project management activities- Work with Marketing, Regulatory, and R&D in generating timelines and budgets for development projects- Other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:- Familiarity with Medical Device regulations 21CFR Part 820, ISO 13485:2016, EudraLex, etc.- Familiarity with the product realization cycle or a formal design controls process- Ability to support new product development in complex environmentsEducation:BachelorsExperience:1-4 yearsQualifications:- BA / BS degree and 5 years of industry experience in manufacturing of collagen products, tissue-based products and experience with medical devices or, MA / MS degree and 3 years of industry experience in manufacturing of collagen products, tissue-based products, and experience with medical devices- 1 year minimum management experience- Ability to work in a team environment, to establish production metrics - Knowledgeable in aseptic technique and production in clean room environments and cGMP concepts, establishment of production metrics, validation requirements, maintenance cycles, calibration programs, sterilization validation programs and dose audits, environmental monitoring reporting Are you ready to start your next career? Please click apply or call us at 352-378-2300 to inquire about our job opportunities.We offer Medical, Dental, 401(k) and bonuses! We pay weekly!Spherion Gainesville, FL is a drug free workplace.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Gainesville, FL has a client looking for a Manufacturing Engineer to be responsible for production, project management and engineering functions within manufacturing. The position includes oversight and maintenance of the manufacturing environment, equipment, and processes with the responsibility of producing safe and effective products on time and within budget. Let's get to work.Direct Hire Opportunity! Alachua, FL Schedule: FT, M-F, 8am - 5pmSalary: $31/hrResponsibilities:- Motivate/mentor technical staff, supporting strategic planning, resource planning and continuous improvement- Work with development and manufacturing team to optimize systems and processes for the orderly, safe, and efficient flow of manufacturing processes- Provide clear, consistent, and measurable direction regarding timelines and deliverables- Ensure the quality and integrity of production and project management activities- Work with Marketing, Regulatory, and R&D in generating timelines and budgets for development projects- Other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:- Familiarity with Medical Device regulations 21CFR Part 820, ISO 13485:2016, EudraLex, etc.- Familiarity with the product realization cycle or a formal design controls process- Ability to support new product development in complex environmentsEducation:BachelorsExperience:1-4 yearsQualifications:- BA / BS degree and 5 years of industry experience in manufacturing of collagen products, tissue-based products and experience with medical devices or, MA / MS degree and 3 years of industry experience in manufacturing of collagen products, tissue-based products, and experience with medical devices- 1 year minimum management experience- Ability to work in a team environment, to establish production metrics - Knowledgeable in aseptic technique and production in clean room environments and cGMP concepts, establishment of production metrics, validation requirements, maintenance cycles, calibration programs, sterilization validation programs and dose audits, environmental monitoring reporting Are you ready to start your next career? Please click apply or call us at 352-378-2300 to inquire about our job opportunities.We offer Medical, Dental, 401(k) and bonuses! We pay weekly!Spherion Gainesville, FL is a drug free workplace.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Bedford, Massachusetts
      • Permanent
      • $80,000 - $85,000 per year
      • 8:00 AM - 5:00 PM
      Spherion is hiring for an experienced Process Engineer interested in working at Precix located in New Bedford, MA.This position is responsible for supporting, improving and advancing the rubbermanufacturing process and/or methods and new product development and their launches.Responsibilities:-Develop, evaluate and improve manufacturing process methods using ???hands on??? involvement, if necessary.-Utilize company data acquisition sources to evaluate processes and suggest/implement improvements.-Plan and develop experimental test programs.-Confer with engineering and other appropriate personnel to prepare design modification.-Confer with management and other staff regarding manufacturing capabilities, production schedules and other considerations to facilitate production process improvements.-Evaluate and approve design changes, specifications and drawing releases.-Coordinate activities concerned with technical developments including scheduling, resolving, engineering design and test issues.-Confer with appropriate personnel to help ensure efficient production methods are implemented on new products (pre-production launches).-Research and analyze data such as: customer design proposals and specifications to determine feasibility and costs.-Provide customer with requested/required information for design and approvals.-Evaluate and approve design changes, specifications and drawing release.-Confer with vendors to determine product specifications and arrange for purchase of equipment and materials.-Evaluate, test and implement alternate product according to specifications and quality standards.-Direct and coordinate fabrication and installation activities to ensure products and systems conform to engineering design and customer specifications.-Maintain safety protocols and environmental impacts are reviewed to meet any applicable standards.-Coordinate operation, maintenance and repair activities to obtain optimum utilization of machines and equipment. -Design projects must be managed to specific phases or aspects such as: input, output, verification, and validation.-Prepare and present interim and complete project reports to senior management and others as necessary.-Perform other duties as required or requested.SUPERVISORY RESPONSIBILITES:-Must be capable of managing a work force that includes but is not limited to scheduling workflow, tracking attendance and managing conflict.Working hours: 8:00 AM - 5:00 PMSkills:-Exposure and understanding of Automotive, Aerospace and Industrial Quality Standards.-Six Sigma, continuous improvement, or other problem-solving methodology is necessary for true solution implementation. Experience with lean manufacturing methods is beneficial.-Project management skills, strong organizational skills and analytical skills.-Knowledge of urethane products, a plus.-Proficient with MS Word, Excel, and PowerPoint.-SAP and CAD experience is a plus.-Must be able to work closely with Quality, Operations, Maintenance, Machine Shop, IT, Sales/Marketing, Finance etc. and be able to communicate effectively to coordinate projects/tasks.-Urethane processing experience is a plus.Education:BachelorsExperience:1-4 yearsQualifications:-Bachelor of Science degree in engineering or equivalent in quantifiable rubber/plastic related processing experience. PHYSICAL DEMANDS AND WORK ENVIRONMENT:-Work environment consists of office and manufacturing environments which may have exposure to noise, heat, and rubber smells.-Noise levels are quiet to moderate up to 2/3 of the time.-Noise levels are loud 1/3 of the time.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring for an experienced Process Engineer interested in working at Precix located in New Bedford, MA.This position is responsible for supporting, improving and advancing the rubbermanufacturing process and/or methods and new product development and their launches.Responsibilities:-Develop, evaluate and improve manufacturing process methods using ???hands on??? involvement, if necessary.-Utilize company data acquisition sources to evaluate processes and suggest/implement improvements.-Plan and develop experimental test programs.-Confer with engineering and other appropriate personnel to prepare design modification.-Confer with management and other staff regarding manufacturing capabilities, production schedules and other considerations to facilitate production process improvements.-Evaluate and approve design changes, specifications and drawing releases.-Coordinate activities concerned with technical developments including scheduling, resolving, engineering design and test issues.-Confer with appropriate personnel to help ensure efficient production methods are implemented on new products (pre-production launches).-Research and analyze data such as: customer design proposals and specifications to determine feasibility and costs.-Provide customer with requested/required information for design and approvals.-Evaluate and approve design changes, specifications and drawing release.-Confer with vendors to determine product specifications and arrange for purchase of equipment and materials.-Evaluate, test and implement alternate product according to specifications and quality standards.-Direct and coordinate fabrication and installation activities to ensure products and systems conform to engineering design and customer specifications.-Maintain safety protocols and environmental impacts are reviewed to meet any applicable standards.-Coordinate operation, maintenance and repair activities to obtain optimum utilization of machines and equipment. -Design projects must be managed to specific phases or aspects such as: input, output, verification, and validation.-Prepare and present interim and complete project reports to senior management and others as necessary.-Perform other duties as required or requested.SUPERVISORY RESPONSIBILITES:-Must be capable of managing a work force that includes but is not limited to scheduling workflow, tracking attendance and managing conflict.Working hours: 8:00 AM - 5:00 PMSkills:-Exposure and understanding of Automotive, Aerospace and Industrial Quality Standards.-Six Sigma, continuous improvement, or other problem-solving methodology is necessary for true solution implementation. Experience with lean manufacturing methods is beneficial.-Project management skills, strong organizational skills and analytical skills.-Knowledge of urethane products, a plus.-Proficient with MS Word, Excel, and PowerPoint.-SAP and CAD experience is a plus.-Must be able to work closely with Quality, Operations, Maintenance, Machine Shop, IT, Sales/Marketing, Finance etc. and be able to communicate effectively to coordinate projects/tasks.-Urethane processing experience is a plus.Education:BachelorsExperience:1-4 yearsQualifications:-Bachelor of Science degree in engineering or equivalent in quantifiable rubber/plastic related processing experience. PHYSICAL DEMANDS AND WORK ENVIRONMENT:-Work environment consists of office and manufacturing environments which may have exposure to noise, heat, and rubber smells.-Noise levels are quiet to moderate up to 2/3 of the time.-Noise levels are loud 1/3 of the time.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fresno, California
      • Permanent
      • $140,000 - $170,000 per year
      • 8:00 AM - 5:00 PM
      A leader in the Engineering Department, this role will direct, supervise and be accountable for capital programs, projects, strategic initiatives, and vendor relationships, etc., This role will also oversee the Engineering & Maintenance staff to provide the highest executional effectiveness to support the operations of the organization.Responsibilities:???Identifying/solving issues and managing scope, budget and quality in a proactive, timely manner???Engineering support activities to facilitate completion of specific projects.???Schedule, budget, coordinate project objectives within budgetary limits and reporting status???Process engineering and equipment layout, integration, and specification services for projects that include a comparative analysis and executive summary for senior management???Vendor equipment investigation, selection, price negotiation, coordination, and procurement efforts related to projects???Participate in monthly and/or weekly project reviews for technical and design concerns with Senior Management???Preparation and review of scope documents, job specifications, proficiency evaluation, price negotiations and contract terms???Analyze and plan for installation of equipment and related construction activities???Management of on-site contractors???Inspects work progress, equipment and construction sites.???Project start-up and commissioning equipment???Management of Process & Package Specifications & SourcingWorking hours: 8:00 AM - 5:00 PMSkills:Extensive experience with high and/or low acid processing engineering and application.Competency in Auto-CAD.Working knowledge of PLC, RS Logix and Wonderware.Education:BachelorsExperience:7-10 yearsQualifications:BS Degree in Engineering or related course study.Minimum 7 years of experience (10 + years preferred) in an Engineering management role in a Food Manufacturing or related environment. Send resume to rogerstiles@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.San Francisco Fair Chance Ordinance:Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.
      A leader in the Engineering Department, this role will direct, supervise and be accountable for capital programs, projects, strategic initiatives, and vendor relationships, etc., This role will also oversee the Engineering & Maintenance staff to provide the highest executional effectiveness to support the operations of the organization.Responsibilities:???Identifying/solving issues and managing scope, budget and quality in a proactive, timely manner???Engineering support activities to facilitate completion of specific projects.???Schedule, budget, coordinate project objectives within budgetary limits and reporting status???Process engineering and equipment layout, integration, and specification services for projects that include a comparative analysis and executive summary for senior management???Vendor equipment investigation, selection, price negotiation, coordination, and procurement efforts related to projects???Participate in monthly and/or weekly project reviews for technical and design concerns with Senior Management???Preparation and review of scope documents, job specifications, proficiency evaluation, price negotiations and contract terms???Analyze and plan for installation of equipment and related construction activities???Management of on-site contractors???Inspects work progress, equipment and construction sites.???Project start-up and commissioning equipment???Management of Process & Package Specifications & SourcingWorking hours: 8:00 AM - 5:00 PMSkills:Extensive experience with high and/or low acid processing engineering and application.Competency in Auto-CAD.Working knowledge of PLC, RS Logix and Wonderware.Education:BachelorsExperience:7-10 yearsQualifications:BS Degree in Engineering or related course study.Minimum 7 years of experience (10 + years preferred) in an Engineering management role in a Food Manufacturing or related environment. Send resume to rogerstiles@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.San Francisco Fair Chance Ordinance:Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.