You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    12 Permanent jobs found in South Dakota

    Filter3
    Clear all
      • Brookings, South Dakota
      • Permanent
      • $17.00 - $24.00 per hour
      • Various Shifts Available
      Spherion Staffing is searching for Welders-Fabricators-Powder coater and Assembly Techs for a client in Brookings, SD! These position will be responsible for operation of various fabricating machines, welding or Powder Coating and Assembly. Shifts: Days: Mon-Thurs 7am-4:30pm, Friday 7a-11amNights: Mon-Thurs, 4:30pm-3amWeekend: Fri-Sun, 7am-7pmPay: $17-$24.00 /hour+ DOE$2.00 /hour shift differential for night shift$4.00/ hour shift differential for weekendsResponsibilities:-Set up and operate fabricating machines-Read tape measures and calipers-Record and monitor material usage-Maintain a clean and orderly work area-Perform prescribed preventive maintenance on machineResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School Diploma or GED-1 year of manufacturing experience, preferred-Ability to lift 50 pounds -Attention to details -Ability to read and understand blueprintsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is searching for Welders-Fabricators-Powder coater and Assembly Techs for a client in Brookings, SD! These position will be responsible for operation of various fabricating machines, welding or Powder Coating and Assembly. Shifts: Days: Mon-Thurs 7am-4:30pm, Friday 7a-11amNights: Mon-Thurs, 4:30pm-3amWeekend: Fri-Sun, 7am-7pmPay: $17-$24.00 /hour+ DOE$2.00 /hour shift differential for night shift$4.00/ hour shift differential for weekendsResponsibilities:-Set up and operate fabricating machines-Read tape measures and calipers-Record and monitor material usage-Maintain a clean and orderly work area-Perform prescribed preventive maintenance on machineResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School Diploma or GED-1 year of manufacturing experience, preferred-Ability to lift 50 pounds -Attention to details -Ability to read and understand blueprintsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Tea, South Dakota
      • Permanent
      • $80,000 - $100,000 per year
      • 8:00 AM - 5:00 PM
      Spherion Staffing is looking for a Software Developer with at least 2 years' experience developing applications using C#, VB.Net, ASP.Net and SQL Server. The Software Developer will design and develop new software applications in a variety of coding languages such as Microsoft.NET, PHP, and others. Qualified candidates will have a Bachelor's degree in computer programming or related field.Hours: 8:00 am to 5:00 pm Monday - FridayDirect Hire OpportunitySalary $80-100k/year DOEResponsibilities:- Create and modify computer programs based on project specifications- Collaborate with department managers, and other stakeholders to fully understand the tasks that must be accomplished by the software requested- Design, or assist with the design of, a graphical user interface (GUI) as well as data structures as needed- Test programs; coordinate and observe beta testing of new or updated programs- Debug or correct any issues discovered during beta testing- Issue stable release and monitor for any issues- Analyze, review, and revise programs as needed to increase operating efficiency or adapt the program to new requirements- Develop and maintain documentation of program development and revisions- Provide training to end-users- Perform other related duties as assignedResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Bachelor's degree in Computer Programing or related field required-Minimum of two years of related work preferred-Must have exceptional verbal and written communication skills-Strong knowledge of.NET (VB and C#)-Strong knowledge of PHP, HTML, CSS, and JavaScript-Strong knowledge of relational databases (SQL Server, MySQL, Oracle)-Willingness to learn other programming languages-Experience in a manufacturing environment and ERP-Exposure to general networking infrastructure is helpfulEducation:BachelorsExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for a Software Developer with at least 2 years' experience developing applications using C#, VB.Net, ASP.Net and SQL Server. The Software Developer will design and develop new software applications in a variety of coding languages such as Microsoft.NET, PHP, and others. Qualified candidates will have a Bachelor's degree in computer programming or related field.Hours: 8:00 am to 5:00 pm Monday - FridayDirect Hire OpportunitySalary $80-100k/year DOEResponsibilities:- Create and modify computer programs based on project specifications- Collaborate with department managers, and other stakeholders to fully understand the tasks that must be accomplished by the software requested- Design, or assist with the design of, a graphical user interface (GUI) as well as data structures as needed- Test programs; coordinate and observe beta testing of new or updated programs- Debug or correct any issues discovered during beta testing- Issue stable release and monitor for any issues- Analyze, review, and revise programs as needed to increase operating efficiency or adapt the program to new requirements- Develop and maintain documentation of program development and revisions- Provide training to end-users- Perform other related duties as assignedResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Bachelor's degree in Computer Programing or related field required-Minimum of two years of related work preferred-Must have exceptional verbal and written communication skills-Strong knowledge of.NET (VB and C#)-Strong knowledge of PHP, HTML, CSS, and JavaScript-Strong knowledge of relational databases (SQL Server, MySQL, Oracle)-Willingness to learn other programming languages-Experience in a manufacturing environment and ERP-Exposure to general networking infrastructure is helpfulEducation:BachelorsExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Alexandria, South Dakota
      • Permanent
      • $20.00 - $25.00 per hour
      • 6:30 AM - 5:00 PM
      Spherion Staffing is looking for an experienced welder for a company located in Alexandria, SD. Shifts:Monday - Thursday 6:30AM - 5PM, overtime may be requiredPay: $20-25/hour DOE Responsibilities:-Read and understand blueprints-Read and understand weld symbols-MIG & TIG welding experience, preferred-Assist win other areas of fabrication-Cleaning and maintenance duties as required-Other duties as assigned by weld leadResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -1 year experience or schooling -Organized, self- motivated and strong communication skills -Lifting up to 50 pounds-Must have basic math skills-Ability to review designs and drawingsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for an experienced welder for a company located in Alexandria, SD. Shifts:Monday - Thursday 6:30AM - 5PM, overtime may be requiredPay: $20-25/hour DOE Responsibilities:-Read and understand blueprints-Read and understand weld symbols-MIG & TIG welding experience, preferred-Assist win other areas of fabrication-Cleaning and maintenance duties as required-Other duties as assigned by weld leadResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -1 year experience or schooling -Organized, self- motivated and strong communication skills -Lifting up to 50 pounds-Must have basic math skills-Ability to review designs and drawingsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Alexandria, South Dakota
      • Permanent
      • $16.00 per hour
      • 6:30 AM - 5:00 PM
      Spherion Staffing has an immediate opening for Assemblers with a company located in Alexandria, SD! Pay: $16/hour Shift: Monday - Thursday 6:30 am - 5:00 pm, overtime may be required Responsibilities:-Checking products against standards and specifications-Follow both written and verbal instructions-Assemble product as required -Read and comprehend instructions-Align material and put together complex units-Keep record of production quantities and time-Report all issues -Prepare and file job work reportsResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -Experience using forklift, pallet jack, material handling equipment -Ability to read and write legibly-Accurately use measuring equipment-Ability to lift up to 50lbs-Should have good computer skills -Hand eye coordination -Must have a good understanding of blue prints and operation layoutsBenefits: -Medical, Dental, Vision Insurance-Retirement account with matched contributions-Paid vacation and sick/ personal leave-Holiday Pay-Attendance bonusesEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has an immediate opening for Assemblers with a company located in Alexandria, SD! Pay: $16/hour Shift: Monday - Thursday 6:30 am - 5:00 pm, overtime may be required Responsibilities:-Checking products against standards and specifications-Follow both written and verbal instructions-Assemble product as required -Read and comprehend instructions-Align material and put together complex units-Keep record of production quantities and time-Report all issues -Prepare and file job work reportsResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -Experience using forklift, pallet jack, material handling equipment -Ability to read and write legibly-Accurately use measuring equipment-Ability to lift up to 50lbs-Should have good computer skills -Hand eye coordination -Must have a good understanding of blue prints and operation layoutsBenefits: -Medical, Dental, Vision Insurance-Retirement account with matched contributions-Paid vacation and sick/ personal leave-Holiday Pay-Attendance bonusesEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Alexandria, South Dakota
      • Permanent
      • $20.00 per hour
      • 6:30 AM - 5:00 PM
      Spherion Staffing has an immediate opening for a Machine Operator with a company located in Alexandria, SD! This candidate will operate various machines to assemble and package products. Qualified applicants should have previous manufacturing or assembly experience.Pay $20/hour Hours: Monday - Thursday 6:30 am - 5:00 pm, overtime may be requiredResponsibilities:-Operate production machines and equipment-Meet production standards-Machine set-ups -Measure and align materials accurately-Inspect and evaluate materials-Support other production areas as needed-Maintain a clean work environment-Other duties as assignedResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -Ability to read and write legibly-Accurately use measuring equipment-Ability to lift up to 50lbs-Should have good computer skills -Hand eye coordination -Must have a good understanding of blue prints and operation layoutsBenefits: -Medical, Dental, Vision Insurance-Retirement account with matched contributions-Paid vacation and sick/ personal leave-Holiday Pay-Attendance bonusesEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has an immediate opening for a Machine Operator with a company located in Alexandria, SD! This candidate will operate various machines to assemble and package products. Qualified applicants should have previous manufacturing or assembly experience.Pay $20/hour Hours: Monday - Thursday 6:30 am - 5:00 pm, overtime may be requiredResponsibilities:-Operate production machines and equipment-Meet production standards-Machine set-ups -Measure and align materials accurately-Inspect and evaluate materials-Support other production areas as needed-Maintain a clean work environment-Other duties as assignedResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -Ability to read and write legibly-Accurately use measuring equipment-Ability to lift up to 50lbs-Should have good computer skills -Hand eye coordination -Must have a good understanding of blue prints and operation layoutsBenefits: -Medical, Dental, Vision Insurance-Retirement account with matched contributions-Paid vacation and sick/ personal leave-Holiday Pay-Attendance bonusesEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Tea, South Dakota
      • Permanent
      • $20.00 - $24.00 per hour
      • 7:00 AM - 4:30 PM
      Spherion Staffing is assisting our client; a local industrial manufacturing company who is looking for 1st shift experienced Welders. The Welder will perform various types of weld and finishing operations using Mig/Tig welding. Qualified candidates should have at least 2 years' welding experience and be forklift certified.Monday-Friday 7 am-4:30 pmDirect Hire OpportunityPay $20-24/hour DOEResponsibilities:-Use blueprints and drawings to plan layouts and procedures-Set up components for welding according to specifications-Weld components using welding equipment in various positions (vertical, and horizontal)-Completes documentation and reporting when required-Tack/Weld a wide variety of metal parts and products as directed-Inspect parts for accuracy and qualityResponsibilities:See AboveWorking hours: 7:00 AM - 4:30 PMSkills:Requirements:-High school diploma/GED-Minimum of 2 years' welding experience -Experience using a variety of welding equipment and procedures (MIG and TIG for repairs as necessary)-Experience in using electrical or manual tools (grinders, jigs, tape measures, etc.)-Ability to read and interpret technical documents and drawings-Must have a clean, valid driver's license-Must have a forklift licenseEducation:High SchoolExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is assisting our client; a local industrial manufacturing company who is looking for 1st shift experienced Welders. The Welder will perform various types of weld and finishing operations using Mig/Tig welding. Qualified candidates should have at least 2 years' welding experience and be forklift certified.Monday-Friday 7 am-4:30 pmDirect Hire OpportunityPay $20-24/hour DOEResponsibilities:-Use blueprints and drawings to plan layouts and procedures-Set up components for welding according to specifications-Weld components using welding equipment in various positions (vertical, and horizontal)-Completes documentation and reporting when required-Tack/Weld a wide variety of metal parts and products as directed-Inspect parts for accuracy and qualityResponsibilities:See AboveWorking hours: 7:00 AM - 4:30 PMSkills:Requirements:-High school diploma/GED-Minimum of 2 years' welding experience -Experience using a variety of welding equipment and procedures (MIG and TIG for repairs as necessary)-Experience in using electrical or manual tools (grinders, jigs, tape measures, etc.)-Ability to read and interpret technical documents and drawings-Must have a clean, valid driver's license-Must have a forklift licenseEducation:High SchoolExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Watertown, South Dakota
      • Permanent
      • $17.00 - $20.00 per hour
      • 6:00 AM - 2:30 PM
      Spherion Staffing has several openings for Production Technicians. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in a clean and safe production environment.Responsibilities:Job Duties:Perform work as apparent or assigned. This might include but is not limited to the following activities:Assemble products per specifications and prescribed procedures.Set up and operate machines, processes or equipment. Monitor life of tooling and sharpen toolsPerform inspections, tests and audits on processes, products and components. Diagnose faults, conduct repairs, and utilize appropriate measuring, inspection and test equipment and procedures to assure consistency in parts produced.Insure that all parts meet specifications, finishes and special handling requirements utilizing appropriate documentation.Utilize proper storage, handling and disposal methods of all materials, including hazardous material when applicable.Assist in maintaining department supplies and consumables.Assist in the operation of the waste water treatment system to ensure effluents meet EPA parameters. Assist with the filing of all required EPA reporting.Supports the department and continuous improvement concepts by suggesting changes and improvements.Keep department and machines clean and orderly, and maintain housekeeping requirements.Perform work in a safe manner by following safety rules and insuring that proper safety equipment is used.Troubleshoot, maintain and perform routine maintenance / preventative maintenance on department machines and equipment. Maintain department records per established procedures.Seeks and recommends ways to eliminate potential quality problems, to improve procedures and methods, and to increase productivity using the Quality Management System (policy, procedure, work instructions).Working hours: 6:00 AM - 2:30 PMSkills:see aboveEducation:High SchoolExperience:0-1 yearsQualifications:Qualifications:High school diploma or GED.Physical ability to lift, carry and maneuver 65 pounds. Physical ability to stand all day.Demonstrated ability to read and interpret all applicable blueprints, schematics and diagrams.Demonstrated ability to work in a cooperative and team oriented environment.Demonstrated ability to communicate (verbal/written) effectively with customers, suppliers and other employees. To be considered for this position please call or email Greg Stafford 605-335-6010 or gregorystafford@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has several openings for Production Technicians. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in a clean and safe production environment.Responsibilities:Job Duties:Perform work as apparent or assigned. This might include but is not limited to the following activities:Assemble products per specifications and prescribed procedures.Set up and operate machines, processes or equipment. Monitor life of tooling and sharpen toolsPerform inspections, tests and audits on processes, products and components. Diagnose faults, conduct repairs, and utilize appropriate measuring, inspection and test equipment and procedures to assure consistency in parts produced.Insure that all parts meet specifications, finishes and special handling requirements utilizing appropriate documentation.Utilize proper storage, handling and disposal methods of all materials, including hazardous material when applicable.Assist in maintaining department supplies and consumables.Assist in the operation of the waste water treatment system to ensure effluents meet EPA parameters. Assist with the filing of all required EPA reporting.Supports the department and continuous improvement concepts by suggesting changes and improvements.Keep department and machines clean and orderly, and maintain housekeeping requirements.Perform work in a safe manner by following safety rules and insuring that proper safety equipment is used.Troubleshoot, maintain and perform routine maintenance / preventative maintenance on department machines and equipment. Maintain department records per established procedures.Seeks and recommends ways to eliminate potential quality problems, to improve procedures and methods, and to increase productivity using the Quality Management System (policy, procedure, work instructions).Working hours: 6:00 AM - 2:30 PMSkills:see aboveEducation:High SchoolExperience:0-1 yearsQualifications:Qualifications:High school diploma or GED.Physical ability to lift, carry and maneuver 65 pounds. Physical ability to stand all day.Demonstrated ability to read and interpret all applicable blueprints, schematics and diagrams.Demonstrated ability to work in a cooperative and team oriented environment.Demonstrated ability to communicate (verbal/written) effectively with customers, suppliers and other employees. To be considered for this position please call or email Greg Stafford 605-335-6010 or gregorystafford@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Brandon, South Dakota
      • Permanent
      • $90,000 - $115,000 per year
      • 8:00 AM - 5:00 PM
      Spherion is currently interviewing for an Accountant Manager to work directly for one of our local clients in the Sioux Falls area. The Accounting Manager is responsible for managing and coordinating the activities and operations of the accounting department and staff, including general accounting, accounts receivable, accounts payable and treasury accounting for the location as well as assisting in reviewing and reporting of business unit and consolidated financial results. Direct Hire OpportunitySalary 90-115k/year DOEResponsibilities:- Assist in the review and reporting of business unit and consolidated financial results, including the preparation and/or review of financial report analyses along with financial presentations for senior management and the Board of Directors- Assist in the review and preparation of Company's external reporting (10-K/10-Q)- Review and analyze the organization's accounting operation; establish, develop, and/or recommend accounting policies to management- Prepare and analyze financial and operational reports including reports required by regulatory agencies, banks, investors, and other external parties- Manage monthly accounting close cycle; review journal entries and monthly general ledger account reconciliations- Review and analyze complex financial information and transactions- Participate in the implementation and testing of financial systems- Analyze, review, and manage general ledger, accounts payable, and accounts receivable systems- Develop, implement, and monitor systems for general accounting- Review, update and ensure adherence to accounting and Sarbanes-Oxley controls- Manage accounting and tax return for the Company Foundation- Coordinate year-end audits for business units- Hire, train, supervise, motivate, and develop general accounting, accounts payable and accounts receivable staff; manage schedules and workflow- Assign duties and monitor quality of work; assure staff conforms to organizational policies, accounting controls and government regulations- Provide day-to-day guidance and oversight of subordinates; actively work to promote and recognize performance- Remain up to date on overall activities of the team, identify problem areas and take corrective actions- Other tasks as assignedResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:- Bachelor's degree (B. A.) in Accounting, Finance, or equivalent- Certified Public Accountant (CPA) certification is a plus but NOT required - Minimum of eight years related experience- Minimum of 3 years of supervisory experience- Excellent written and verbal communication skills- Knowledge of manufacturing, financial reporting, and cost accounting- Demonstrated ability to supervise and motivate subordinates- Proficient on ERP systems and MS Office- Commitment to excellence and high standards- Acute attention to detail- Ability to work with all levels of management- Strong organizational, problem-solving, and analytical skills- Able to manage priorities and workflow- Sound judgment with the ability to make timely and sound decisions- Versatile, flexible, and a willingness to work within constantly changing priorities with enthusiasmEducation:BachelorsExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. E
      Spherion is currently interviewing for an Accountant Manager to work directly for one of our local clients in the Sioux Falls area. The Accounting Manager is responsible for managing and coordinating the activities and operations of the accounting department and staff, including general accounting, accounts receivable, accounts payable and treasury accounting for the location as well as assisting in reviewing and reporting of business unit and consolidated financial results. Direct Hire OpportunitySalary 90-115k/year DOEResponsibilities:- Assist in the review and reporting of business unit and consolidated financial results, including the preparation and/or review of financial report analyses along with financial presentations for senior management and the Board of Directors- Assist in the review and preparation of Company's external reporting (10-K/10-Q)- Review and analyze the organization's accounting operation; establish, develop, and/or recommend accounting policies to management- Prepare and analyze financial and operational reports including reports required by regulatory agencies, banks, investors, and other external parties- Manage monthly accounting close cycle; review journal entries and monthly general ledger account reconciliations- Review and analyze complex financial information and transactions- Participate in the implementation and testing of financial systems- Analyze, review, and manage general ledger, accounts payable, and accounts receivable systems- Develop, implement, and monitor systems for general accounting- Review, update and ensure adherence to accounting and Sarbanes-Oxley controls- Manage accounting and tax return for the Company Foundation- Coordinate year-end audits for business units- Hire, train, supervise, motivate, and develop general accounting, accounts payable and accounts receivable staff; manage schedules and workflow- Assign duties and monitor quality of work; assure staff conforms to organizational policies, accounting controls and government regulations- Provide day-to-day guidance and oversight of subordinates; actively work to promote and recognize performance- Remain up to date on overall activities of the team, identify problem areas and take corrective actions- Other tasks as assignedResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:- Bachelor's degree (B. A.) in Accounting, Finance, or equivalent- Certified Public Accountant (CPA) certification is a plus but NOT required - Minimum of eight years related experience- Minimum of 3 years of supervisory experience- Excellent written and verbal communication skills- Knowledge of manufacturing, financial reporting, and cost accounting- Demonstrated ability to supervise and motivate subordinates- Proficient on ERP systems and MS Office- Commitment to excellence and high standards- Acute attention to detail- Ability to work with all levels of management- Strong organizational, problem-solving, and analytical skills- Able to manage priorities and workflow- Sound judgment with the ability to make timely and sound decisions- Versatile, flexible, and a willingness to work within constantly changing priorities with enthusiasmEducation:BachelorsExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. E
      • Brookings, South Dakota
      • Permanent
      • $15.00 - $20.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion Staffing is looking for a CNC Machinist to work with a client in the Brookings, SD area. The CNC Machinist will operate CNC machines to safely produce parts that meet company objectives for safety, quality and productivity while machining centers to fabricate metallic and nonmetallic parts. Qualified applicants should have a 1-2 year certificate from college or a technical school along with 1-2 years related experience or training. Direct Hire Opportunity$15-20/ hour DOEMonday - Friday 8 am- 5 pm Responsibilities:-Operate a variety of CNC machines -Set up and operates machine to verify accuracy of machine settings or programmed control data-Operate metal welding equipment to rebuild or fabricate parts-Set up and operates machine on trial run to verify accuracy of machine settings or programmed control data-Verify conformance of finished work piece to specifications-Work cooperatively with Production and Maintenance personnel in troubleshooting manufacturing problems-Participate in ordering supplies and other materials-Manage vendors when outsourced work is required for specific projects-Develop and adhere to project timelines and give periodic reports-Adjust tools and replace as necessary while maintaining a clean, safe work area-Perform daily maintenance of machines-Perform side operations during machine cycle time as required-Other duties as assignedResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Certificate from college or Technical School-1-2 years related Machinist experience-Read and understand CNC programs -Read and understand layouts and blueprints-Perform operations under minimum supervisor and maintain performance levels-Understanding of safety rules and regulationsBenefits: -Paid time off-401K-Tuition reimbursement-Wellness programs-Short / long term disability-Dental -Prescription coverageEducation:TradeExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for a CNC Machinist to work with a client in the Brookings, SD area. The CNC Machinist will operate CNC machines to safely produce parts that meet company objectives for safety, quality and productivity while machining centers to fabricate metallic and nonmetallic parts. Qualified applicants should have a 1-2 year certificate from college or a technical school along with 1-2 years related experience or training. Direct Hire Opportunity$15-20/ hour DOEMonday - Friday 8 am- 5 pm Responsibilities:-Operate a variety of CNC machines -Set up and operates machine to verify accuracy of machine settings or programmed control data-Operate metal welding equipment to rebuild or fabricate parts-Set up and operates machine on trial run to verify accuracy of machine settings or programmed control data-Verify conformance of finished work piece to specifications-Work cooperatively with Production and Maintenance personnel in troubleshooting manufacturing problems-Participate in ordering supplies and other materials-Manage vendors when outsourced work is required for specific projects-Develop and adhere to project timelines and give periodic reports-Adjust tools and replace as necessary while maintaining a clean, safe work area-Perform daily maintenance of machines-Perform side operations during machine cycle time as required-Other duties as assignedResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Certificate from college or Technical School-1-2 years related Machinist experience-Read and understand CNC programs -Read and understand layouts and blueprints-Perform operations under minimum supervisor and maintain performance levels-Understanding of safety rules and regulationsBenefits: -Paid time off-401K-Tuition reimbursement-Wellness programs-Short / long term disability-Dental -Prescription coverageEducation:TradeExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Tea, South Dakota
      • Permanent
      • $20.00 - $24.00 per hour
      • 7:00 AM - 4:30 PM
      Spherion Staffing has 1st shift openings for Press Brake Operators with a client in Tea, SD. The Press Brake Operator will produce precision metal parts as specified by the work order, job specifications, and blueprints.The position performs all levels of set-ups, creates simple programs manually or using software, and prepares minor fixture designs for CNC lathes and millsMonday-Thursday 7 am-4:30 pm and Friday 7 am-11 amPay $20-24/hour DOEDirect Hire Opportunity Responsibilities:- Review work order to identify job specifications and required material and parts- Locate, measure, and check quality of material to be fabricated- Set-up, calibrate, and adjust machines and equipment to job specifications- Prepare and organize raw material on pallets to maximize workspace- Operate brake, shear, and press machinery to form raw material into parts according to job specifications and blueprints from work orders- Review completed work to ensure parts meet company and customer quality requirements - Load and unload completed material and parts onto pallets- Track and record rejected parts, time cycles, production levels, and tool control- Perform regular cleaning and maintenance duties on machines, tools, equipment- Deliver cut material and parts to other departments for the next stage in processingResponsibilities:See aboveWorking hours: 7:00 AM - 4:30 PMSkills:Requirements:-High school diploma or equivalent -3 to 5 years of brake press experience -Clean, valid driver's license-Forklift license-Ability to work on multiple tasks at one time in a fast-paced environment-Ability to work independently as well as in a team environmentEducation:High SchoolExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-610-3350Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has 1st shift openings for Press Brake Operators with a client in Tea, SD. The Press Brake Operator will produce precision metal parts as specified by the work order, job specifications, and blueprints.The position performs all levels of set-ups, creates simple programs manually or using software, and prepares minor fixture designs for CNC lathes and millsMonday-Thursday 7 am-4:30 pm and Friday 7 am-11 amPay $20-24/hour DOEDirect Hire Opportunity Responsibilities:- Review work order to identify job specifications and required material and parts- Locate, measure, and check quality of material to be fabricated- Set-up, calibrate, and adjust machines and equipment to job specifications- Prepare and organize raw material on pallets to maximize workspace- Operate brake, shear, and press machinery to form raw material into parts according to job specifications and blueprints from work orders- Review completed work to ensure parts meet company and customer quality requirements - Load and unload completed material and parts onto pallets- Track and record rejected parts, time cycles, production levels, and tool control- Perform regular cleaning and maintenance duties on machines, tools, equipment- Deliver cut material and parts to other departments for the next stage in processingResponsibilities:See aboveWorking hours: 7:00 AM - 4:30 PMSkills:Requirements:-High school diploma or equivalent -3 to 5 years of brake press experience -Clean, valid driver's license-Forklift license-Ability to work on multiple tasks at one time in a fast-paced environment-Ability to work independently as well as in a team environmentEducation:High SchoolExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-610-3350Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Sioux Falls, South Dakota
      • Permanent
      • $19.00 - $20.00 per hour
      • 7:00 AM - 5:30 PM
      Spherion Staffing is looking for Paint Technicians. The Paint Technician is responsible for mixing, matching, and applying paint to cabinets, doors, or panels, completing touchups, and coordinating large painting projects .DIRECT HIRE OPPORTUNITY Pay $19-20.00/hour Schedule: Mon-Thurs, 7am-5:30pm plus mandatory Friday overtime from 7am-3pmResponsibilities:-Apply coatings, such as paint, glaze or lacquer to protect projects-Use of spray guns or brushes-Examine finished surfaces of workspaces-Clean and maintain tools and equipment-Place coated work pieces in ovens or dryers -Select and mix ingredients to prepare coating -Conceal blemishes in work pieces such as nicks and dentsResponsibilities:See AboveWorking hours: 7:00 AM - 5:30 PMSkills:Requirements:-High School diploma or GED-Minimum 6 months experience -Ability to lift 50 pounds consistently and up to 100 pounds frequently-Working with hand tools-Possess good hand-eye coordinationEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered please apply online at www.spherion.com/siouxfalls or call Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for Paint Technicians. The Paint Technician is responsible for mixing, matching, and applying paint to cabinets, doors, or panels, completing touchups, and coordinating large painting projects .DIRECT HIRE OPPORTUNITY Pay $19-20.00/hour Schedule: Mon-Thurs, 7am-5:30pm plus mandatory Friday overtime from 7am-3pmResponsibilities:-Apply coatings, such as paint, glaze or lacquer to protect projects-Use of spray guns or brushes-Examine finished surfaces of workspaces-Clean and maintain tools and equipment-Place coated work pieces in ovens or dryers -Select and mix ingredients to prepare coating -Conceal blemishes in work pieces such as nicks and dentsResponsibilities:See AboveWorking hours: 7:00 AM - 5:30 PMSkills:Requirements:-High School diploma or GED-Minimum 6 months experience -Ability to lift 50 pounds consistently and up to 100 pounds frequently-Working with hand tools-Possess good hand-eye coordinationEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered please apply online at www.spherion.com/siouxfalls or call Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Rapid City, South Dakota
      • Permanent
      • $80,000 - $100,000 per year
      • 8:00 AM - 5:00 PM
      Spherion Staffing is looking for a Service Technician in the Rapid City, SD area. This position performs onsite and offsite services, repairs, technical support and inspections of company products. Qualified candidates must have a High School Diploma and minimum of five (5) years previous experience. Salary: $80-100k/year DOEHours: 8 am -5 pmDirect Hire OpportunityResponsibilities:-Perform on-site and off-site services, troubleshooting, repair and/or installation of company product(s)-Provide technical support to customers on operational or maintenance aspects-Provide trip reports upon return from field-Hold follow up meeting with required personnel to discuss engineering changes and upgrades-Assist with weld inspections to criteria and documentation-Assist with final equipment audits and criteria and documentationResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Five to ten years in field service -Significant travel will be required -Strong customer service and verbal communication skills-Strong mechanical, electrical and hydraulics systems reasoning skills-Valid driver's license with a clean driving record-Must be able to read and interpret basic blueprints-Must be able to perform basic shop math functions and use standard measuring devicesEducation:BachelorsExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for a Service Technician in the Rapid City, SD area. This position performs onsite and offsite services, repairs, technical support and inspections of company products. Qualified candidates must have a High School Diploma and minimum of five (5) years previous experience. Salary: $80-100k/year DOEHours: 8 am -5 pmDirect Hire OpportunityResponsibilities:-Perform on-site and off-site services, troubleshooting, repair and/or installation of company product(s)-Provide technical support to customers on operational or maintenance aspects-Provide trip reports upon return from field-Hold follow up meeting with required personnel to discuss engineering changes and upgrades-Assist with weld inspections to criteria and documentation-Assist with final equipment audits and criteria and documentationResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Five to ten years in field service -Significant travel will be required -Strong customer service and verbal communication skills-Strong mechanical, electrical and hydraulics systems reasoning skills-Valid driver's license with a clean driving record-Must be able to read and interpret basic blueprints-Must be able to perform basic shop math functions and use standard measuring devicesEducation:BachelorsExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    Explore over 6 jobs in South Dakota

    It looks like you want to switch your language. This will reset your filters on your current job search.