You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    7 jobs found for Technician in Albert Lea, Minnesota

    Filter2
    Clear all
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 - $20.00 per hour
      • 8:00 AM - 5:00 PM
      You are the business card of our company. You are usually the first and last person to deal with all of the customers and vendors. You must always portray the image and ethics of our company in everything you do. Customer satisfaction will depend on your people skills.The primary function is to integrate between the customer, technician, and vendor while maintaining control and a orderly environment. You will need to identify the customers' problems and expectations, then effectively document and communicate all information to the technician.You must always keep the customers best interest in mind while remembering we are the professionals hired by them to identify and repair their vehicles problems. You must sell our services properly; experience, expertise, equipment, and knowledge. You must also make sure we have delivered what was sold, and that the customer is well aware of what they are paying for and why. You are the primary salesman and receptionist. You must understand our Industry to be able to instill confidence in or technical ability and competence. This must always portray a professional appearance and attitude, both in person and on the telephone. This is inclusive of all contacts; customers, employees, vendors, outside sales, etc.Responsibilities:Address and resolve customer concerns and complaints.Maintain reception area in a clean orderly fashion. Empty trash as necessary. Clean and supply customer bathroom as necessary. Vacuum, mop, dust, and polish office area as necessary.Facilitate special customer needsVehicle or customer pickup or delivery, Towing arrangements, Rental car arrangements.Provide customers with information brochures and diagnostic worksheets.Open/Close and prepare the shop for business operations. Scheduling of all appointments.Allowing adequate time for all diagnosis, repair, additional sell, and carry-over of all operations.Handles technician assignments and job routing.Initiate morning meetings for RAP session with Technicians.Create and completely fill out all Work Orders.All parts and labor operations.Specific notes for warranty, recommended repairs or special customer information.Insure all vehicle information is on work orderCompletion and correct documentation of all customers invoices.Create printed estimates for all work prior to approval, update and properly document any changes or required information.Properly document all approvals per the MN Motor Vehicle Repair Act.Securing approval or authorization of all work orders and validate payment.Maintain workflow and productivity.Be aware of completion status of work in process.Monitor timely arrival of parts.Insure vehicle completion and delivery are meeting commitments, and on track with promises.Scheduling being met as promised: bays and technicians kept busy and productive with work, Technicians available to work on vehicles scheduled.Acquisition of all parts needed for the repair operation, including inventoried parts and maintaining inventory.Answer telephones (promptly and) courteouslyGreet all customers promptly and courteously, even when currently involved with someone else.Park and lock all vehicles in a orderly fashion in designated areas.Send reminder notices for routine maintenance and other follow up programs.Send Thank you cards to all new customers, large purchases and to people that refer new customers.Handle all parts credits and returns: cores, warranties and unused new parts.Working hours: 8:00 AM - 5:00 PMSkills:1.-Must have a good positive attitude and personality. Able to work with the public and maintain a positive attitude in the most stressful environments. Must be able to communicate effectively with customers. Have a basic understanding of the automotive industry.2.-Must be able to work with minimal supervision.3.-Must be able to earn the trust of co-workers, vendors and customers.4.-Must possess a willingness to learn new skills.5.-General understanding of automotive components.6.-Ability to cope with a stressful environment and periods of stress and tension.Education:High SchoolExperience:1-4 yearsQualifications:1.Must have High School diploma.2.Must have good working knowledge of IBM compatible computers.3.Must have good working knowledge of standard office equipment; calculator, multi-line phone system, photocopier.4.Must be able to type/keyboard 40 words per minute on standard keyboard, with less than 5% error.5.Must have good working knowledge of Microsoft Office products: Word, Excel, Publisher, etc. 6.Minimum of 4 years experience in the automotive industry, or Customer relations, or Similar position.7.Formal Automotive Service Advisor Training.8.Valid MN Drivers License.a)No more than 2 MINOR moving violations in the last 3 years.b)No MAJOR violations in the last 5 years.9.Ability to work long hours when required.10.Able to lift 40 pounds.ExpectationsWork appropriate AppearanceGood AttendanceGood AttitudeGoals & objectives Willing to attend self-improvement seminars and job specific training as necessary to continually improve and grow in job skills, with a minimum requirement of 4 hours per month, average.Must be able to speak, read and write (legibly) proper English, no slang, racial slurs, etc.Good customer skills, manners, tact, polite language and gestures (even under pressure).Good listening skills. Work for a reputable locally owned company willing to invest in their employees! Great benefit package.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      You are the business card of our company. You are usually the first and last person to deal with all of the customers and vendors. You must always portray the image and ethics of our company in everything you do. Customer satisfaction will depend on your people skills.The primary function is to integrate between the customer, technician, and vendor while maintaining control and a orderly environment. You will need to identify the customers' problems and expectations, then effectively document and communicate all information to the technician.You must always keep the customers best interest in mind while remembering we are the professionals hired by them to identify and repair their vehicles problems. You must sell our services properly; experience, expertise, equipment, and knowledge. You must also make sure we have delivered what was sold, and that the customer is well aware of what they are paying for and why. You are the primary salesman and receptionist. You must understand our Industry to be able to instill confidence in or technical ability and competence. This must always portray a professional appearance and attitude, both in person and on the telephone. This is inclusive of all contacts; customers, employees, vendors, outside sales, etc.Responsibilities:Address and resolve customer concerns and complaints.Maintain reception area in a clean orderly fashion. Empty trash as necessary. Clean and supply customer bathroom as necessary. Vacuum, mop, dust, and polish office area as necessary.Facilitate special customer needsVehicle or customer pickup or delivery, Towing arrangements, Rental car arrangements.Provide customers with information brochures and diagnostic worksheets.Open/Close and prepare the shop for business operations. Scheduling of all appointments.Allowing adequate time for all diagnosis, repair, additional sell, and carry-over of all operations.Handles technician assignments and job routing.Initiate morning meetings for RAP session with Technicians.Create and completely fill out all Work Orders.All parts and labor operations.Specific notes for warranty, recommended repairs or special customer information.Insure all vehicle information is on work orderCompletion and correct documentation of all customers invoices.Create printed estimates for all work prior to approval, update and properly document any changes or required information.Properly document all approvals per the MN Motor Vehicle Repair Act.Securing approval or authorization of all work orders and validate payment.Maintain workflow and productivity.Be aware of completion status of work in process.Monitor timely arrival of parts.Insure vehicle completion and delivery are meeting commitments, and on track with promises.Scheduling being met as promised: bays and technicians kept busy and productive with work, Technicians available to work on vehicles scheduled.Acquisition of all parts needed for the repair operation, including inventoried parts and maintaining inventory.Answer telephones (promptly and) courteouslyGreet all customers promptly and courteously, even when currently involved with someone else.Park and lock all vehicles in a orderly fashion in designated areas.Send reminder notices for routine maintenance and other follow up programs.Send Thank you cards to all new customers, large purchases and to people that refer new customers.Handle all parts credits and returns: cores, warranties and unused new parts.Working hours: 8:00 AM - 5:00 PMSkills:1.-Must have a good positive attitude and personality. Able to work with the public and maintain a positive attitude in the most stressful environments. Must be able to communicate effectively with customers. Have a basic understanding of the automotive industry.2.-Must be able to work with minimal supervision.3.-Must be able to earn the trust of co-workers, vendors and customers.4.-Must possess a willingness to learn new skills.5.-General understanding of automotive components.6.-Ability to cope with a stressful environment and periods of stress and tension.Education:High SchoolExperience:1-4 yearsQualifications:1.Must have High School diploma.2.Must have good working knowledge of IBM compatible computers.3.Must have good working knowledge of standard office equipment; calculator, multi-line phone system, photocopier.4.Must be able to type/keyboard 40 words per minute on standard keyboard, with less than 5% error.5.Must have good working knowledge of Microsoft Office products: Word, Excel, Publisher, etc. 6.Minimum of 4 years experience in the automotive industry, or Customer relations, or Similar position.7.Formal Automotive Service Advisor Training.8.Valid MN Drivers License.a)No more than 2 MINOR moving violations in the last 3 years.b)No MAJOR violations in the last 5 years.9.Ability to work long hours when required.10.Able to lift 40 pounds.ExpectationsWork appropriate AppearanceGood AttendanceGood AttitudeGoals & objectives Willing to attend self-improvement seminars and job specific training as necessary to continually improve and grow in job skills, with a minimum requirement of 4 hours per month, average.Must be able to speak, read and write (legibly) proper English, no slang, racial slurs, etc.Good customer skills, manners, tact, polite language and gestures (even under pressure).Good listening skills. Work for a reputable locally owned company willing to invest in their employees! Great benefit package.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 8:00 AM - 4:30 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 - $20.00 per hour
      • 8:00 AM - 5:00 PM
      A. You are the business card of our company. You are usually the first and last person to deal with all of the customers and vendors. You must always portray the image and ethics of our company in everything you do. Customer satisfaction will depend on your people skills.B. The primary function is to integrate between the customer, technician, and vendor while maintaining control and a orderly environment. You will need to identify the customers' problems and expectations, then effectively document and communicate all information to the technician.C. You must always keep the customers best interest in mind while remembering we are the professionals hired by them to identify and repair their vehicles problems. You must sell our services properly; experience, expertise, equipment, and knowledge. You must also make sure we have delivered what was sold, and that the customer is well aware of what they are paying for and why. D. You are the primary salesman and receptionist. You must understand our Industry to be able to instill confidence in or technical ability and competence. This must always portray a professional appearance and attitude, both in person and on the telephone. This is inclusive of all contacts; customers, employees, vendors, outside sales, etc.Responsibilities:Duties and Responsibilities1.Control customer complaints through quality control of all work.2.Address and resolve customer concerns and complaints.3.Target an average of 3 billable hours and $350 total sale per Repair Order.4.Maintain an average overall gross profit of at least 60%.5.Maintain reception area in a clean orderly fashion.6.Facilitate special customer needs: Vehicle or customer pickup or delivery. Towing arrangements as necessary. Rental car arrangements as necessary.7.Provide customers with information brochures and diagnostic worksheets.8.Open and prepare the shop for business operations in the morning by proper time. Close the shop and operations at the appropriate times as necessary.9.Scheduling of all appointments.10.Create and completely fill out all Work Orders.11.Securing approval or authorization of all work orders and validate payment.12..Maintain workflow and productivity.13.Acquisition of all parts needed for the repair operation, including inventoried parts and maintaining inventory.14.Answer telephones (promptly and) courteously, before the second ring if at all possible. m prior repair orders.15.Send Thank you cards to all new customers, large purchases and to people that refer new customers.16.Handle all parts credits and returns: cores, warranties and unused new parts. Must insure proper credit invoice is received from supplier. Maintain returned parts ledger.Working hours: 8:00 AM - 5:00 PMSkills:1.-Positive attitude and personality. Able to work with the public and maintain a positive attitude in the most stressful environments. Must be able to communicate effectively with customers. Have a basic understanding of the automotive industry.2.-Able to work with minimal supervision.3.-Able to earn the trust of co-workers, vendors and customers.4.-Possess a willingness to learn new skills.5.-General understanding of automotive components.6.-Able to cope with a stressful environment and periods of stress and tension.Education:High SchoolExperience:1-4 yearsQualifications:QUALIFICATIONSB.Specific1.High School diploma.2.Good working knowledge of computers.3.Good working knowledge of standard office equipment; calculator, multi-line phone system, photocopier.4.Able to type/keyboard 40 words per minute on standard keyboard, with less than 5% error.5.Good working knowledge of Microsoft Office products: Word, Excel, Publisher, etc. 6.Minimum of 4 years experience in the automotive industry, or Customer relations, or Similar position.7.Formal Automotive Service Advisor Training.8.Valid MN Drivers License.9.Ability to work long hours when required.10.Able to lift 40 pounds. This is a Direct Hire position with a reputable locally owned Auto Repair Shop that has been in business for a very long time. Great Benefits! Monday thru Friday 8-5pm. No Weekends, No Holidays!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A. You are the business card of our company. You are usually the first and last person to deal with all of the customers and vendors. You must always portray the image and ethics of our company in everything you do. Customer satisfaction will depend on your people skills.B. The primary function is to integrate between the customer, technician, and vendor while maintaining control and a orderly environment. You will need to identify the customers' problems and expectations, then effectively document and communicate all information to the technician.C. You must always keep the customers best interest in mind while remembering we are the professionals hired by them to identify and repair their vehicles problems. You must sell our services properly; experience, expertise, equipment, and knowledge. You must also make sure we have delivered what was sold, and that the customer is well aware of what they are paying for and why. D. You are the primary salesman and receptionist. You must understand our Industry to be able to instill confidence in or technical ability and competence. This must always portray a professional appearance and attitude, both in person and on the telephone. This is inclusive of all contacts; customers, employees, vendors, outside sales, etc.Responsibilities:Duties and Responsibilities1.Control customer complaints through quality control of all work.2.Address and resolve customer concerns and complaints.3.Target an average of 3 billable hours and $350 total sale per Repair Order.4.Maintain an average overall gross profit of at least 60%.5.Maintain reception area in a clean orderly fashion.6.Facilitate special customer needs: Vehicle or customer pickup or delivery. Towing arrangements as necessary. Rental car arrangements as necessary.7.Provide customers with information brochures and diagnostic worksheets.8.Open and prepare the shop for business operations in the morning by proper time. Close the shop and operations at the appropriate times as necessary.9.Scheduling of all appointments.10.Create and completely fill out all Work Orders.11.Securing approval or authorization of all work orders and validate payment.12..Maintain workflow and productivity.13.Acquisition of all parts needed for the repair operation, including inventoried parts and maintaining inventory.14.Answer telephones (promptly and) courteously, before the second ring if at all possible. m prior repair orders.15.Send Thank you cards to all new customers, large purchases and to people that refer new customers.16.Handle all parts credits and returns: cores, warranties and unused new parts. Must insure proper credit invoice is received from supplier. Maintain returned parts ledger.Working hours: 8:00 AM - 5:00 PMSkills:1.-Positive attitude and personality. Able to work with the public and maintain a positive attitude in the most stressful environments. Must be able to communicate effectively with customers. Have a basic understanding of the automotive industry.2.-Able to work with minimal supervision.3.-Able to earn the trust of co-workers, vendors and customers.4.-Possess a willingness to learn new skills.5.-General understanding of automotive components.6.-Able to cope with a stressful environment and periods of stress and tension.Education:High SchoolExperience:1-4 yearsQualifications:QUALIFICATIONSB.Specific1.High School diploma.2.Good working knowledge of computers.3.Good working knowledge of standard office equipment; calculator, multi-line phone system, photocopier.4.Able to type/keyboard 40 words per minute on standard keyboard, with less than 5% error.5.Good working knowledge of Microsoft Office products: Word, Excel, Publisher, etc. 6.Minimum of 4 years experience in the automotive industry, or Customer relations, or Similar position.7.Formal Automotive Service Advisor Training.8.Valid MN Drivers License.9.Ability to work long hours when required.10.Able to lift 40 pounds. This is a Direct Hire position with a reputable locally owned Auto Repair Shop that has been in business for a very long time. Great Benefits! Monday thru Friday 8-5pm. No Weekends, No Holidays!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 5:30 AM
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:?Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. ?Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)?Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspections?Conducting Pre-Operational activities?Testing and evaluating raw material and finished product?Writing HOLD tags and assigning and/or assisting with the disposition of product?Reviewing finished production folders as part of the positive release program?Must maintain department safety rules compliance and be a positive safety role model. ?Responsible for ensuring an organized, clean and safe work environment.?Follow all Food safety practices and processes applicable to the department. ?Execute what is required by the company QMS.?Monitor and maintain all food safety activities as part of daily tasks.?Enforce food safety plan while producing product.?Promote food safety and quality to all departments?Support and assist the manufacturing teams to meet customer and product quality performance requirements. ?Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.?Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.?Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionWorking hours: 6:00 PM - 5:30 AMSkills:--Clear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.--Able to manage time and workload efficiently, and the ability to prioritize and modify priorities accordingly--Good safety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.--Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.--Able to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.--Demonstrate ability to work and develop others in a team environment--Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplace--Ability and willingness to learn, practice, and improve documented work procedures--Demonstrated ability to function in a fast-paced environment --Verbal and written communication skills sufficient to discuss, develop, and implement plans. --High sensitivity to quality and on time delivery of materials and servicesEducation:High SchoolExperience:0-1 yearsQualifications:?Experience with Microsoft Office, including Excel, Outlook, and Word ?Able to perform basic mathematical equations?Ability to adapt in a team and/or individual setting to allow achievement of company goals ?Established communication, problem solving, and attention to detail skills?Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.?Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements?PCQI and HACCP certified desired Temp to PERM!!! Once roll to PERM, wages increase to $18.50/HR!! PLUS AMAZING BENEFITS that include FREE Well@Work Clinic, Medical, Dental/Vision Ins, Medical Flex Spending Pan, Dependent Care, PTO and Holiday Pay, Retirement 401K match, Life Ins, ?and MORE!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:?Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. ?Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)?Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspections?Conducting Pre-Operational activities?Testing and evaluating raw material and finished product?Writing HOLD tags and assigning and/or assisting with the disposition of product?Reviewing finished production folders as part of the positive release program?Must maintain department safety rules compliance and be a positive safety role model. ?Responsible for ensuring an organized, clean and safe work environment.?Follow all Food safety practices and processes applicable to the department. ?Execute what is required by the company QMS.?Monitor and maintain all food safety activities as part of daily tasks.?Enforce food safety plan while producing product.?Promote food safety and quality to all departments?Support and assist the manufacturing teams to meet customer and product quality performance requirements. ?Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.?Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.?Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionWorking hours: 6:00 PM - 5:30 AMSkills:--Clear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.--Able to manage time and workload efficiently, and the ability to prioritize and modify priorities accordingly--Good safety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.--Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.--Able to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.--Demonstrate ability to work and develop others in a team environment--Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplace--Ability and willingness to learn, practice, and improve documented work procedures--Demonstrated ability to function in a fast-paced environment --Verbal and written communication skills sufficient to discuss, develop, and implement plans. --High sensitivity to quality and on time delivery of materials and servicesEducation:High SchoolExperience:0-1 yearsQualifications:?Experience with Microsoft Office, including Excel, Outlook, and Word ?Able to perform basic mathematical equations?Ability to adapt in a team and/or individual setting to allow achievement of company goals ?Established communication, problem solving, and attention to detail skills?Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.?Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements?PCQI and HACCP certified desired Temp to PERM!!! Once roll to PERM, wages increase to $18.50/HR!! PLUS AMAZING BENEFITS that include FREE Well@Work Clinic, Medical, Dental/Vision Ins, Medical Flex Spending Pan, Dependent Care, PTO and Holiday Pay, Retirement 401K match, Life Ins, ?and MORE!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 8:00 AM - 4:30 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 7:00 AM - 3:15 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 5:30 AM
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:?Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. ?Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)?Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspections?Conducting Pre-Operational activities?Testing and evaluating raw material and finished product?Writing HOLD tags and assigning and/or assisting with the disposition of product?Reviewing finished production folders as part of the positive release program?Must maintain department safety rules compliance and be a positive safety role model. ?Responsible for ensuring an organized, clean and safe work environment.?Follow all Food safety practices and processes applicable to the department. ?Execute what is required by the company QMS.?Monitor and maintain all food safety activities as part of daily tasks.?Enforce food safety plan while producing product.?Promote food safety and quality to all departments?Support and assist the manufacturing teams to meet customer and product quality performance requirements. ?Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.?Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.?Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionWorking hours: 6:00 PM - 5:30 AMSkills:--Clear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.--Able to manage time and workload efficiently, and the ability to prioritize and modify priorities accordingly--Good safety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.--Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.--Able to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.--Demonstrate ability to work and develop others in a team environment--Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplace--Ability and willingness to learn, practice, and improve documented work procedures--Demonstrated ability to function in a fast-paced environment --Verbal and written communication skills sufficient to discuss, develop, and implement plans. --High sensitivity to quality and on time delivery of materials and servicesEducation:High SchoolExperience:0-1 yearsQualifications:?Experience with Microsoft Office, including Excel, Outlook, and Word ?Able to perform basic mathematical equations?Ability to adapt in a team and/or individual setting to allow achievement of company goals ?Established communication, problem solving, and attention to detail skills?Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.?Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements?PCQI and HACCP certified desired Temp to PERM!!! Once roll to PERM, wages increase to $18.50/HR!! PLUS AMAZING BENEFITS that include FREE Well@Work Clinic, Medical, Dental/Vision Ins, Medical Flex Spending Pan, Dependent Care, PTO and Holiday Pay, Retirement 401K match, Life Ins, ?and MORE!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:?Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. ?Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)?Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspections?Conducting Pre-Operational activities?Testing and evaluating raw material and finished product?Writing HOLD tags and assigning and/or assisting with the disposition of product?Reviewing finished production folders as part of the positive release program?Must maintain department safety rules compliance and be a positive safety role model. ?Responsible for ensuring an organized, clean and safe work environment.?Follow all Food safety practices and processes applicable to the department. ?Execute what is required by the company QMS.?Monitor and maintain all food safety activities as part of daily tasks.?Enforce food safety plan while producing product.?Promote food safety and quality to all departments?Support and assist the manufacturing teams to meet customer and product quality performance requirements. ?Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.?Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.?Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionWorking hours: 6:00 PM - 5:30 AMSkills:--Clear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.--Able to manage time and workload efficiently, and the ability to prioritize and modify priorities accordingly--Good safety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.--Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.--Able to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.--Demonstrate ability to work and develop others in a team environment--Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplace--Ability and willingness to learn, practice, and improve documented work procedures--Demonstrated ability to function in a fast-paced environment --Verbal and written communication skills sufficient to discuss, develop, and implement plans. --High sensitivity to quality and on time delivery of materials and servicesEducation:High SchoolExperience:0-1 yearsQualifications:?Experience with Microsoft Office, including Excel, Outlook, and Word ?Able to perform basic mathematical equations?Ability to adapt in a team and/or individual setting to allow achievement of company goals ?Established communication, problem solving, and attention to detail skills?Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.?Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements?PCQI and HACCP certified desired Temp to PERM!!! Once roll to PERM, wages increase to $18.50/HR!! PLUS AMAZING BENEFITS that include FREE Well@Work Clinic, Medical, Dental/Vision Ins, Medical Flex Spending Pan, Dependent Care, PTO and Holiday Pay, Retirement 401K match, Life Ins, ?and MORE!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.