You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    3 jobs found for Technician in St Peter

    Filter2
    Clear all
      • St Peter, Minnesota
      • Permanent
      • $22.00 - $30.00 per hour
      • 4:00 PM - 2:00 AM
      NEW OPPORTUNITY ALERT! Spherion Staffing, in partnership with -BRP-/-AlumaCraft in St. Peter, is accepting applications for a Direct Hire Maintenance Technician. This is a great opportunity to become a valued team member of a fabulous company.2nd shift hours: Monday - Thursday, 4:00 p.m. - 2:30 a.m., OT on FridayPay: $22.00 - $30.00 an hourResponsibilities:As a Maintenance Technician, you will perform daily maintenance, troubleshooting, and repair of production equipment. This position is responsible for equipment uptime, keeping machines and equipment in working order, and performing other routine machinery maintenance. .Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of buildings does not deteriorate.Inspect drives, motors, and belts, check fluid levels, replace filters, and perform other maintenance actions.Use hand and power tools such as hammers, hoists, saws, drills, and wrenches, as well as precision measuring instruments and electronic testing devices.Assemble, install, and repair wiring, electrical components, pipe systems, plumbing, machinery, and equipment.Diagnose mechanical problems and determine how to correct them, read blueprints, repair manuals, or parts catalogs, as necessary.Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.Record type and cost of maintenance or repair work in a computer maintenance management system (GuideTi CMMS), documenting job instructions, time spent, parts used, and hours worked.Clean or lubricate shafts, bearings, gears, and other parts of machinery.Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools.Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, and schematic diagrams.Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from storerooms.Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.Operate cutting torches or welding equipment to cut or join metal parts.Working hours: 4:00 PM - 2:00 AMSkills:You must have the ability to use a computer for entering work orders and related details such as job instructions, time spent, parts used, and time spent. CNC router and press brake experience a big plus.Will consider those with a Certified Maintenance Technician (CMT) with 0 - 1 year of experience.CNC router and press brake experience is preferred.Good interpersonal skillsAbility to prioritize tasksMust have the ability to use a computer for entering work orders and related details. Efficient in Excel, Word and Google Suite.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma or GED and 1-2 years or experience OR Post-Secondary Certificate or Associates degree Apply on line or call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      NEW OPPORTUNITY ALERT! Spherion Staffing, in partnership with -BRP-/-AlumaCraft in St. Peter, is accepting applications for a Direct Hire Maintenance Technician. This is a great opportunity to become a valued team member of a fabulous company.2nd shift hours: Monday - Thursday, 4:00 p.m. - 2:30 a.m., OT on FridayPay: $22.00 - $30.00 an hourResponsibilities:As a Maintenance Technician, you will perform daily maintenance, troubleshooting, and repair of production equipment. This position is responsible for equipment uptime, keeping machines and equipment in working order, and performing other routine machinery maintenance. .Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of buildings does not deteriorate.Inspect drives, motors, and belts, check fluid levels, replace filters, and perform other maintenance actions.Use hand and power tools such as hammers, hoists, saws, drills, and wrenches, as well as precision measuring instruments and electronic testing devices.Assemble, install, and repair wiring, electrical components, pipe systems, plumbing, machinery, and equipment.Diagnose mechanical problems and determine how to correct them, read blueprints, repair manuals, or parts catalogs, as necessary.Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.Record type and cost of maintenance or repair work in a computer maintenance management system (GuideTi CMMS), documenting job instructions, time spent, parts used, and hours worked.Clean or lubricate shafts, bearings, gears, and other parts of machinery.Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools.Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, and schematic diagrams.Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from storerooms.Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.Operate cutting torches or welding equipment to cut or join metal parts.Working hours: 4:00 PM - 2:00 AMSkills:You must have the ability to use a computer for entering work orders and related details such as job instructions, time spent, parts used, and time spent. CNC router and press brake experience a big plus.Will consider those with a Certified Maintenance Technician (CMT) with 0 - 1 year of experience.CNC router and press brake experience is preferred.Good interpersonal skillsAbility to prioritize tasksMust have the ability to use a computer for entering work orders and related details. Efficient in Excel, Word and Google Suite.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma or GED and 1-2 years or experience OR Post-Secondary Certificate or Associates degree Apply on line or call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • St Peter, Minnesota
      • Permanent
      • $19.50 per hour
      • 5:00 PM - 3:30 AM
      DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 5:00 p.m. - 3:30 a.m., OT on Fridays as neededPay: $19.50/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 5:00 PM - 3:30 AMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 5:00 p.m. - 3:30 a.m., OT on Fridays as neededPay: $19.50/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 5:00 PM - 3:30 AMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • St Peter, Minnesota
      • Permanent
      • $18.00 per hour
      • 6:00 AM - 4:30 PM
      DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 6:00 a.m. - 4:30 p.m., OT on Fridays as neededPay: $18.00/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 6:00 AM - 4:30 PMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 6:00 a.m. - 4:30 p.m., OT on Fridays as neededPay: $18.00/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 6:00 AM - 4:30 PMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.