You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    3 jobs found for Temperature in Minnesota

    Filter2
    Clear all
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Tends machine that performs packaging operation.Responsibilities:Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 6:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $18.50/hr, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Tends machine that performs packaging operation.Responsibilities:Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 6:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $18.50/hr, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $18.27 per hour
      • 6:00 PM - 6:00 AM
      Work for a great, reputable company in Owatonna, MN. Full benefit package upon direct hire with the company. WEEKLY PAY! The Lacquer Spray Machine (L.S.M.) Operators are responsible for the application of the lacquer spray coating to the inside of the can in compliance with quality control specifications. They have primary control of the processing of cans from the point of feeding of cans into the conveying above the spray machines, until they reach the Internal Bake Ovens.6PM - 6AM. Work 4 days on, have 4 days off. Work 6 months out of the year! Apply today!Responsibilities:-Clearing can jams from Lacquer Spray Machines and from upper conveyors.-Check and monitor the following: Clean canworks, Overall quality of cans, Lacquer pressure of machines, Temperature of lacquer, Copper sulfate checks on flanges.-Monitor, measure and enter into the computer the following data: Metal exposure of cans, weight of lacquer inside the cans, film weight distribution -Maintain cleanliness of machines including the spray nozzles, turrent wheels, lacquer overspray boxes, machine exterior and general work area. Follow all safety procedures and PPE requirements.-Perform routine maintenance including the setting of guns, nozzles, can guides and spray delay.-Perform preventative maintenance which includes the replacement of drive and conveyor belts to the oven, tips, rails, guns, lacquer and vacuum filters.-Follow proper material handling procedures, which includes proper disposal of waste lacquer and labeling of waste barrels.-Perform Equipment Set-up Evaluations (ESE) on LSMs after adjustment or changes are made.-Monitor and assist other production processes on the Back End to ensure a constant flow of cans into and through the LSM process.-Other duties as required.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical aptitudeEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Basic computer skills to perform data entry.-Basic mechanical skills-Basic machine operating skills Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a great, reputable company in Owatonna, MN. Full benefit package upon direct hire with the company. WEEKLY PAY! The Lacquer Spray Machine (L.S.M.) Operators are responsible for the application of the lacquer spray coating to the inside of the can in compliance with quality control specifications. They have primary control of the processing of cans from the point of feeding of cans into the conveying above the spray machines, until they reach the Internal Bake Ovens.6PM - 6AM. Work 4 days on, have 4 days off. Work 6 months out of the year! Apply today!Responsibilities:-Clearing can jams from Lacquer Spray Machines and from upper conveyors.-Check and monitor the following: Clean canworks, Overall quality of cans, Lacquer pressure of machines, Temperature of lacquer, Copper sulfate checks on flanges.-Monitor, measure and enter into the computer the following data: Metal exposure of cans, weight of lacquer inside the cans, film weight distribution -Maintain cleanliness of machines including the spray nozzles, turrent wheels, lacquer overspray boxes, machine exterior and general work area. Follow all safety procedures and PPE requirements.-Perform routine maintenance including the setting of guns, nozzles, can guides and spray delay.-Perform preventative maintenance which includes the replacement of drive and conveyor belts to the oven, tips, rails, guns, lacquer and vacuum filters.-Follow proper material handling procedures, which includes proper disposal of waste lacquer and labeling of waste barrels.-Perform Equipment Set-up Evaluations (ESE) on LSMs after adjustment or changes are made.-Monitor and assist other production processes on the Back End to ensure a constant flow of cans into and through the LSM process.-Other duties as required.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical aptitudeEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Basic computer skills to perform data entry.-Basic mechanical skills-Basic machine operating skills Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $15.75 per hour
      • 7:00 AM - 3:00 PM (Various Shifts Available)
      Assemble finished window hardware products for shipment to customer, according to output plan, while maintaining quality standards.Responsibilities:Assemble metal parts: a. May walk to producing area to get pan of parts for assembly and complete necessary paperwork.b. Read order to verify parts are correct. c. Check quality of components before assembling by referring to written standards for quality control and/or blueprints.d. Record daily individual or work center production quantity on Production Board and in red book. e. Inspects final assembly by referring to written criteria. f. Assemble boxes for final packing of product. - May assist in machine set-up as necessary.Assist in training department personnel with operations and procedures.Meets briefly with following shift to communicate problems, possible solutions and issues requiring attention.May make minor adjustments to machines to keep them in working order.May act as back-up Material Handler, as necessary.May occasionally check and approve work of temporary personnel.May stock parts at work center and stack finished goods on pallet.May perform minor preventive maintenance on machinery.Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PM (Various Shifts Available)Skills:Learn to read blueprints, operate assembly equipment and use computer to verify information.Qualifications / Prior ExperienceSupervision Received - Under regular supervision, only exceptional or unusual tasks are fully checked, normal tasks are spot-checked on a regular basis, generally daily. Assignments are specific, incumbent uses standardized methods to complete. Problem solving and Decision Making - Assesses parts to determine if they meet quality standards, if they do not, may shut down machine and notify Lead.Relations with Others - Interacts with personnel from Assembly area, Plating, Punch Press and Maintenance.May participate in small group activities such as Quality Circles, task teams, safety meetings and other improvement efforts.Learning Period - The basics of working in the Assembly area can be learned in two to three weeks. To handle all aspects of the job with minimal supervision requires six to nine months of on-the-job training.Education:No Degree RequiredExperience:0-1 yearsQualifications:Equipment Operated - Performs mechanical operations using riveters, presses, air vices, semi-automatic assemblymachines, packaging equipment, calculator, various hand tools. Some care is required to recognize trouble and shut downequipment and power hand tools to prevent or minimize damage.Working Conditions and Hazards - General conditions are good, occasional temperature fluctuations as a result of seasonal changes. Exposure to occasional hazards of machine operation. Uniform safety practices consist of safety shoes,safety glasses and other devices as required.Physical Effort Required - Sitting, standing, walking required. Must be able to lift 40 pounds. Eye-hand coordination necessary. Requires repetitive motion. ALL SHIFTS AVAILABLE | THESE GO VERY QUICKLY - APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Assemble finished window hardware products for shipment to customer, according to output plan, while maintaining quality standards.Responsibilities:Assemble metal parts: a. May walk to producing area to get pan of parts for assembly and complete necessary paperwork.b. Read order to verify parts are correct. c. Check quality of components before assembling by referring to written standards for quality control and/or blueprints.d. Record daily individual or work center production quantity on Production Board and in red book. e. Inspects final assembly by referring to written criteria. f. Assemble boxes for final packing of product. - May assist in machine set-up as necessary.Assist in training department personnel with operations and procedures.Meets briefly with following shift to communicate problems, possible solutions and issues requiring attention.May make minor adjustments to machines to keep them in working order.May act as back-up Material Handler, as necessary.May occasionally check and approve work of temporary personnel.May stock parts at work center and stack finished goods on pallet.May perform minor preventive maintenance on machinery.Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PM (Various Shifts Available)Skills:Learn to read blueprints, operate assembly equipment and use computer to verify information.Qualifications / Prior ExperienceSupervision Received - Under regular supervision, only exceptional or unusual tasks are fully checked, normal tasks are spot-checked on a regular basis, generally daily. Assignments are specific, incumbent uses standardized methods to complete. Problem solving and Decision Making - Assesses parts to determine if they meet quality standards, if they do not, may shut down machine and notify Lead.Relations with Others - Interacts with personnel from Assembly area, Plating, Punch Press and Maintenance.May participate in small group activities such as Quality Circles, task teams, safety meetings and other improvement efforts.Learning Period - The basics of working in the Assembly area can be learned in two to three weeks. To handle all aspects of the job with minimal supervision requires six to nine months of on-the-job training.Education:No Degree RequiredExperience:0-1 yearsQualifications:Equipment Operated - Performs mechanical operations using riveters, presses, air vices, semi-automatic assemblymachines, packaging equipment, calculator, various hand tools. Some care is required to recognize trouble and shut downequipment and power hand tools to prevent or minimize damage.Working Conditions and Hazards - General conditions are good, occasional temperature fluctuations as a result of seasonal changes. Exposure to occasional hazards of machine operation. Uniform safety practices consist of safety shoes,safety glasses and other devices as required.Physical Effort Required - Sitting, standing, walking required. Must be able to lift 40 pounds. Eye-hand coordination necessary. Requires repetitive motion. ALL SHIFTS AVAILABLE | THESE GO VERY QUICKLY - APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    Explore over 3 jobs in Minnesota

    It looks like you want to switch your language. This will reset your filters on your current job search.