Thank you for subscribing to your personalized job alerts.

    13 jobs found in belle plaine, minnesota

    Filter2
    • Industry1
      Working in
      Show 13 jobs
      Clear filter
    • Location1
      Location & range
        Show 13 jobs
        Clear filter
      • Job types
        Job types
        Show 13 jobs
        Clear filter
      • Salary
        Salary
        $
        Show 13 jobs
        Clear filter
      Clear all
        • Le Sueur, Minnesota
        • Temp to Perm
        • $13.50 - $14.50 per hour
        • Various Shifts Available
        Spherion with another great entry-level opportunity for you, this one is entry-level. Learn to work in a growing manufacturing facility offering long-term positions with the opportunity to roll over to full-time. This client is willing to train those with no manufacturing experience, which is great!SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $13.502nd shift 3:00 pm - 11:20 pm Mon- Fri - $14.503rd shift 11:00 pm - 7:20 am Mon - Fri - $14.50Responsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions.Operate pallet jack, etc. to load and unload trucks or transport raw material, supplies and products.Set up and use a variety of powered or hand tools to finish edges, glue, remove flash, clear holes, assemble, trim and pack product or parts into shipping cartons.Stand and work at an assigned workstation (s). Processes and operations may be repetitive.Assist elsewhere whenever and wherever needed.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion with another great entry-level opportunity for you, this one is entry-level. Learn to work in a growing manufacturing facility offering long-term positions with the opportunity to roll over to full-time. This client is willing to train those with no manufacturing experience, which is great!SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $13.502nd shift 3:00 pm - 11:20 pm Mon- Fri - $14.503rd shift 11:00 pm - 7:20 am Mon - Fri - $14.50Responsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions.Operate pallet jack, etc. to load and unload trucks or transport raw material, supplies and products.Set up and use a variety of powered or hand tools to finish edges, glue, remove flash, clear holes, assemble, trim and pack product or parts into shipping cartons.Stand and work at an assigned workstation (s). Processes and operations may be repetitive.Assist elsewhere whenever and wherever needed.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Le Sueur, Minnesota
        • Temp to Perm
        • $16.00 - $17.25 per hour
        • Various Shifts Available
        We have a client in Le Sueur looking for production workers, on all of their shifts! This client is offering full-time, long-term positions with opporrtunity to convert to full-time and take on their fabulous benefitts! If you're honest, hardworking, treat others with respect, and want the opportunity to learn and grow, we want to talk to you.SHIFTS AVAILABLE;- 1st Shift (Mon - Thur 5:00am - 3:20 pm) $16.00- 2nd Shift (Mon - Thur 3:00 pm to 1:20 am) +1.25/hr- 3rd Shift (Mon - Thur 9:00 pm to 5:20 am) +1.25/hrResponsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions. Set up and use various tools to finish edges, glue, remove flash, clear holes, saw, sand, straighten, assemble, grind, trim and pack product into shipping cartons.Operate pallet jack, etc., to load and unload trucks or transport raw material, supplies, and products. May operate a forklift after formal training.Stand, bend, twist and work at an assigned workstation(s). Processes and operations may be repetitive.Perform mechanical and safety inspections as well as basic maintenance.Work is generally concentrated on similar machines and processes, and operations. Assist elsewhere whenever and wherever needed.All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        We have a client in Le Sueur looking for production workers, on all of their shifts! This client is offering full-time, long-term positions with opporrtunity to convert to full-time and take on their fabulous benefitts! If you're honest, hardworking, treat others with respect, and want the opportunity to learn and grow, we want to talk to you.SHIFTS AVAILABLE;- 1st Shift (Mon - Thur 5:00am - 3:20 pm) $16.00- 2nd Shift (Mon - Thur 3:00 pm to 1:20 am) +1.25/hr- 3rd Shift (Mon - Thur 9:00 pm to 5:20 am) +1.25/hrResponsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions. Set up and use various tools to finish edges, glue, remove flash, clear holes, saw, sand, straighten, assemble, grind, trim and pack product into shipping cartons.Operate pallet jack, etc., to load and unload trucks or transport raw material, supplies, and products. May operate a forklift after formal training.Stand, bend, twist and work at an assigned workstation(s). Processes and operations may be repetitive.Perform mechanical and safety inspections as well as basic maintenance.Work is generally concentrated on similar machines and processes, and operations. Assist elsewhere whenever and wherever needed.All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Le Center, Minnesota
        • Temp to Perm
        • $12.50 - $13.50 per hour
        • 6:00 AM - 2:00 PM
        We love coffee, allllllllll of the coffee, and if you do too, then maybe we should discuss this job opportunity! Spherion in partnership with our client in Le Center, MN is looking for coffee roasters. Make what you LOVE and get a little discount as well, talk about having your cake and eating it too! It's the BEST!Responsibilities:Roasting coffee to customer specificationsDaily inventoryRoaster cleaning and basic maintenanceKeep roasting area cleanGrind coffee to customer specifications Keep production informed of low green coffeePull green coffee beans to be roastedRecording batch information for each roastOperate within standard operating proceduresOperate forklift and pallet jackWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to lift 30-70lbs frequently in a safe manner.Able to push/pull 70+ poundsAble to work overtime with no noticeAble to multi-taskAble to stand for an 8+ hour shift If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        We love coffee, allllllllll of the coffee, and if you do too, then maybe we should discuss this job opportunity! Spherion in partnership with our client in Le Center, MN is looking for coffee roasters. Make what you LOVE and get a little discount as well, talk about having your cake and eating it too! It's the BEST!Responsibilities:Roasting coffee to customer specificationsDaily inventoryRoaster cleaning and basic maintenanceKeep roasting area cleanGrind coffee to customer specifications Keep production informed of low green coffeePull green coffee beans to be roastedRecording batch information for each roastOperate within standard operating proceduresOperate forklift and pallet jackWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to lift 30-70lbs frequently in a safe manner.Able to push/pull 70+ poundsAble to work overtime with no noticeAble to multi-taskAble to stand for an 8+ hour shift If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Le Center, Minnesota
        • Temp to Perm
        • $12.00 - $13.00 per hour
        • 6:00 AM - 2:00 PM
        Is there any better smell than roasted coffee beans? If you love that smell, this position would be right up your alley! Spherion in partnership with their client in Le Center, MN is looking for packagers, bulk packagers. Help make what you LOVE and get a little discount as well, talk about having your cake and eating it too!Responsibilities:Reads work orders to determine what items must be gathered.Pulls customer orders from stock and places orders in appropriate shipping areaWraps protective material around product.Weighs product and adjusts quantity.Folds and/or tapes to seal bags/boxes.Labels products.Packs special arrangements or selections of product.Inspects materials, products, and containers at each step of packaging process.Uses computer to record information such as weight and date packaged.Be mindful of and adhere to GMP?s, Quality and Food Safety requirements.Be able to successfully identify when quality control measures are needed and follow through as required.Strict adherence to all company policies, procedures and safety rules.Detailed orientedWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:At minimum, a High School Diploma (or an equivalent such as a GED) is required.Attention to detail in a fast paced environment.Ability to read, write and interpret basic correspondence in English.Basic computer experience, including Microsoft excel and Word.Consistent and punctual attendance.Able to lift 30 to 50lbs frequently in a safe manner.Ability to successfully complete the pre-employment process. If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Is there any better smell than roasted coffee beans? If you love that smell, this position would be right up your alley! Spherion in partnership with their client in Le Center, MN is looking for packagers, bulk packagers. Help make what you LOVE and get a little discount as well, talk about having your cake and eating it too!Responsibilities:Reads work orders to determine what items must be gathered.Pulls customer orders from stock and places orders in appropriate shipping areaWraps protective material around product.Weighs product and adjusts quantity.Folds and/or tapes to seal bags/boxes.Labels products.Packs special arrangements or selections of product.Inspects materials, products, and containers at each step of packaging process.Uses computer to record information such as weight and date packaged.Be mindful of and adhere to GMP?s, Quality and Food Safety requirements.Be able to successfully identify when quality control measures are needed and follow through as required.Strict adherence to all company policies, procedures and safety rules.Detailed orientedWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:At minimum, a High School Diploma (or an equivalent such as a GED) is required.Attention to detail in a fast paced environment.Ability to read, write and interpret basic correspondence in English.Basic computer experience, including Microsoft excel and Word.Consistent and punctual attendance.Able to lift 30 to 50lbs frequently in a safe manner.Ability to successfully complete the pre-employment process. If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Saint Peter, Minnesota
        • Temp to Perm
        • $14.00 per hour
        • 7:30 AM - 4:00 PM
        Calling all St. Peterans! Spherion has a wonderful temp-to-hire opportunity for you, offering stable hours on 1st shift. We are looking for motivated individuals with an interest in working in electronics manufacturing! Spherion in partnership with our client has SMT operating positions available! Interested in learning new things? Enjoy operating machines? Curious about the inner workings of your electronics? This might be the jobs for you!Responsibilities:1.Performing the load and unload to/from machine.2. Set up the feeder to machine per set up.3. Perform the simple machine set up and change over.4. Identify the basic SMT components.5. Ability to read and set up lists.6. Set up SMD parts to the correct feeder.Working hours: 7:30 AM - 4:00 PMSkills:Basic computer knowledgeMachine operating experienceEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to lift 30#Drug screen/background requiredSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Calling all St. Peterans! Spherion has a wonderful temp-to-hire opportunity for you, offering stable hours on 1st shift. We are looking for motivated individuals with an interest in working in electronics manufacturing! Spherion in partnership with our client has SMT operating positions available! Interested in learning new things? Enjoy operating machines? Curious about the inner workings of your electronics? This might be the jobs for you!Responsibilities:1.Performing the load and unload to/from machine.2. Set up the feeder to machine per set up.3. Perform the simple machine set up and change over.4. Identify the basic SMT components.5. Ability to read and set up lists.6. Set up SMD parts to the correct feeder.Working hours: 7:30 AM - 4:00 PMSkills:Basic computer knowledgeMachine operating experienceEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to lift 30#Drug screen/background requiredSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Saint Peter, Minnesota
        • Permanent
        • $20.73 per hour
        • 5:00 PM - 3:30 AM
        FABRICATORS NEEDED!!!! We are looking for technically skilled candidates with good attention to detail for the position of Fabricator with ALUMACRAFT in St. Peter. These are DIRECT HIRE POSITIONS that include EXCELLENT BENEFITS! Fabricators are responsible for adhering to a production schedule, ensuring that all parts are properly fitted, aligned and secured, and ensuring that safety standards are always met, among other duties.2nd shift: Monday - Thursday 5:00 p.m. - 3:30 a.m. (OT on Fridays, as needed)Responsibilities:Fabricator Responsibilities:Reading and understanding product schematics and assembly instructions.Verifying dimensions and product specifications.Ensuring that all the required parts for assembly are present.Marking cutting lines on material.Ensuring that quality control standards are met.Maintaining a production schedule.Reporting and detailing product malfunctions.Working hours: 5:00 PM - 3:30 AMSkills:Fabricator Requirements:Proficiency operating fabrication machinery.Good dexterity.Attention to detail.Physical stamina.Education:No Degree RequiredExperience:1-4 yearsQualifications:Must be a team player with reliable attendance to help meet our customer demands.Must be accurate and detail oriented to help create a great product. DON'T WAIT, APPLY TODAY! Call Jennifer ASAP to schedule an interview: 507-317-6788.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        FABRICATORS NEEDED!!!! We are looking for technically skilled candidates with good attention to detail for the position of Fabricator with ALUMACRAFT in St. Peter. These are DIRECT HIRE POSITIONS that include EXCELLENT BENEFITS! Fabricators are responsible for adhering to a production schedule, ensuring that all parts are properly fitted, aligned and secured, and ensuring that safety standards are always met, among other duties.2nd shift: Monday - Thursday 5:00 p.m. - 3:30 a.m. (OT on Fridays, as needed)Responsibilities:Fabricator Responsibilities:Reading and understanding product schematics and assembly instructions.Verifying dimensions and product specifications.Ensuring that all the required parts for assembly are present.Marking cutting lines on material.Ensuring that quality control standards are met.Maintaining a production schedule.Reporting and detailing product malfunctions.Working hours: 5:00 PM - 3:30 AMSkills:Fabricator Requirements:Proficiency operating fabrication machinery.Good dexterity.Attention to detail.Physical stamina.Education:No Degree RequiredExperience:1-4 yearsQualifications:Must be a team player with reliable attendance to help meet our customer demands.Must be accurate and detail oriented to help create a great product. DON'T WAIT, APPLY TODAY! Call Jennifer ASAP to schedule an interview: 507-317-6788.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Saint Peter, Minnesota
        • Permanent
        • $20.76 per hour
        • 5:00 PM - 3:30 AM
        Monday - Thursday 5:00 p.m. - 3:30 a.m., OT on Fridays (as needed). As an industrial spray painter, you will spray surfaces of finished boats and products with protective material such as enamel, epoxy, formcoat, and Linex.Responsibilities:Essential Duties and Responsibilities:Paint primer, and a premium finish and clear coat using HVLP and high pressure airless equipment.Selecting and mixing coating paints to desired color and prepare spraying equipment such as cleaning or adjusting spray guns.Be capable of reading and understanding technical documents such as paint mixing procedures and maintaining sprayer equipment as required.Have the ability and desire to become efficient with painting techniques, meet company productivity rates, maintain mil thickness, and learn all aspects of job as required.Cleaning spraying equipment with solvent or other recommended cleaning solutions daily.Maintaining the paint mix room while following the company safety policies.Maintaining proper respirator care and operation and using the breathing air supply system when spraying epoxy paints.Continue to grow your lean knowledge and use the tools to identify and assist with continuous improvement.Comply with safety regulations and maintain clean and orderly work areas.Ability to write routine reports and correspondence.Working hours: 5:00 PM - 3:30 AMSkills:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.- Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals.- Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.- Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to walk; use hands to finger,(operate spray gun) handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and ability to adjust focus.Education:No Degree RequiredExperience:1-4 yearsQualifications:Industrial painting experience required. DON'T WAIT, APPLY TODAY! Call Jennifer to set up an interview at 507-317-6788Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Monday - Thursday 5:00 p.m. - 3:30 a.m., OT on Fridays (as needed). As an industrial spray painter, you will spray surfaces of finished boats and products with protective material such as enamel, epoxy, formcoat, and Linex.Responsibilities:Essential Duties and Responsibilities:Paint primer, and a premium finish and clear coat using HVLP and high pressure airless equipment.Selecting and mixing coating paints to desired color and prepare spraying equipment such as cleaning or adjusting spray guns.Be capable of reading and understanding technical documents such as paint mixing procedures and maintaining sprayer equipment as required.Have the ability and desire to become efficient with painting techniques, meet company productivity rates, maintain mil thickness, and learn all aspects of job as required.Cleaning spraying equipment with solvent or other recommended cleaning solutions daily.Maintaining the paint mix room while following the company safety policies.Maintaining proper respirator care and operation and using the breathing air supply system when spraying epoxy paints.Continue to grow your lean knowledge and use the tools to identify and assist with continuous improvement.Comply with safety regulations and maintain clean and orderly work areas.Ability to write routine reports and correspondence.Working hours: 5:00 PM - 3:30 AMSkills:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.- Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals.- Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.- Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to walk; use hands to finger,(operate spray gun) handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and ability to adjust focus.Education:No Degree RequiredExperience:1-4 yearsQualifications:Industrial painting experience required. DON'T WAIT, APPLY TODAY! Call Jennifer to set up an interview at 507-317-6788Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Saint Peter, Minnesota
        • Permanent
        • $19.23 per hour
        • 6:00 AM - 4:30 PM
        FABRICATORS NEEDED!!!! We are looking for technically skilled candidates with good attention to detail for the position of Fabricator with ALUMACRAFT in St. Peter. These are DIRECT HIRE POSITIONS that include EXCELLENT BENEFITS! Fabricators are responsible for adhering to a production schedule, ensuring that all parts are properly fitted, aligned and secured, and ensuring that safety standards are always met, among other duties.1st shift: Monday - Thursday 6:00 a.m. - 4:30 p.m. (OT on Fridays, as needed)Responsibilities:Fabricator Responsibilities:Reading and understanding product schematics and assembly instructions.Verifying dimensions and product specifications.Ensuring that all the required parts for assembly are present.Marking cutting lines on material.Ensuring that quality control standards are met.Maintaining a production schedule.Reporting and detailing product malfunctions.Working hours: 6:00 AM - 4:30 PMSkills:Fabricator Requirements:Proficiency operating fabrication machinery.Good dexterity.Attention to detail.Physical stamina.Education:No Degree RequiredExperience:1-4 yearsQualifications:Must be a team player with reliable attendance to help meet our customer demands.Must be accurate and detail oriented to help create a great product. DON'T WAIT, APPLY TODAY! Call Jennifer ASAP to schedule an interview: 507-317-6788.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        FABRICATORS NEEDED!!!! We are looking for technically skilled candidates with good attention to detail for the position of Fabricator with ALUMACRAFT in St. Peter. These are DIRECT HIRE POSITIONS that include EXCELLENT BENEFITS! Fabricators are responsible for adhering to a production schedule, ensuring that all parts are properly fitted, aligned and secured, and ensuring that safety standards are always met, among other duties.1st shift: Monday - Thursday 6:00 a.m. - 4:30 p.m. (OT on Fridays, as needed)Responsibilities:Fabricator Responsibilities:Reading and understanding product schematics and assembly instructions.Verifying dimensions and product specifications.Ensuring that all the required parts for assembly are present.Marking cutting lines on material.Ensuring that quality control standards are met.Maintaining a production schedule.Reporting and detailing product malfunctions.Working hours: 6:00 AM - 4:30 PMSkills:Fabricator Requirements:Proficiency operating fabrication machinery.Good dexterity.Attention to detail.Physical stamina.Education:No Degree RequiredExperience:1-4 yearsQualifications:Must be a team player with reliable attendance to help meet our customer demands.Must be accurate and detail oriented to help create a great product. DON'T WAIT, APPLY TODAY! Call Jennifer ASAP to schedule an interview: 507-317-6788.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Saint Peter, Minnesota
        • Permanent
        • $18.50 - $21.10 per hour
        • 5:00 PM - 3:30 AM
        DIRECT HIRE ALERT!!! We have exciting news! Spherion Staffing has partnered with leading boat manufacturer, Alumacraft in St. Peter, and we are seeking dedicated Assemblers to join the Alumacraft family! These positions are long-term, DIRECT HIRE WITH GREAT PAY AND FULL BENEFITS. Hours for 2nd shift are Monday - Thursday from 5:00 p.m. - 3:30 a.m. with OT on Fridays (as needed).Responsibilities:Installing interior boat components such as brackets etc., carpeting, gluing, sawing, filing, glue gun usage, stapling, vacuuming, and foaming gun use.Select and prepare components for boats, inspect quality of material prior to and following installation using tape measure, jigs, and gauges to insure proper fit and alignment of interior boat components.Inserting die corresponding to size of rivet head in hammer.Dressing triggers to pound and shape head on rivet shank.Drilling holes using air drill.Helps to physically move boat from station to station.May clean or align holes and make adjustments to fit parts.Able to work different stations to meet production needs.Working hours: 5:00 PM - 3:30 AMSkills:Ability to stand and work in various positions for several hours on concreteAbility to see and read complicated instructionsMust be accurate and detail orientated.Education:No Degree RequiredExperience:0-1 yearsQualifications:Strong attendance recordAbility to manually move product and materials up to 50 lbs. through regular physical exertion, including but not limited to climbing, lifting, carrying, pushing pulling and bending. DON'T WAIT, APPLY TODAY! Call Jennifer to schedule a phone interview with Jennifer ASAP at 507-317-6788 they are going quick!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        DIRECT HIRE ALERT!!! We have exciting news! Spherion Staffing has partnered with leading boat manufacturer, Alumacraft in St. Peter, and we are seeking dedicated Assemblers to join the Alumacraft family! These positions are long-term, DIRECT HIRE WITH GREAT PAY AND FULL BENEFITS. Hours for 2nd shift are Monday - Thursday from 5:00 p.m. - 3:30 a.m. with OT on Fridays (as needed).Responsibilities:Installing interior boat components such as brackets etc., carpeting, gluing, sawing, filing, glue gun usage, stapling, vacuuming, and foaming gun use.Select and prepare components for boats, inspect quality of material prior to and following installation using tape measure, jigs, and gauges to insure proper fit and alignment of interior boat components.Inserting die corresponding to size of rivet head in hammer.Dressing triggers to pound and shape head on rivet shank.Drilling holes using air drill.Helps to physically move boat from station to station.May clean or align holes and make adjustments to fit parts.Able to work different stations to meet production needs.Working hours: 5:00 PM - 3:30 AMSkills:Ability to stand and work in various positions for several hours on concreteAbility to see and read complicated instructionsMust be accurate and detail orientated.Education:No Degree RequiredExperience:0-1 yearsQualifications:Strong attendance recordAbility to manually move product and materials up to 50 lbs. through regular physical exertion, including but not limited to climbing, lifting, carrying, pushing pulling and bending. DON'T WAIT, APPLY TODAY! Call Jennifer to schedule a phone interview with Jennifer ASAP at 507-317-6788 they are going quick!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Saint Peter, Minnesota
        • Permanent
        • $17.00 - $19.60 per hour
        • 6:00 AM - 4:30 PM
        DIRECT HIRE ALERT!!! We have exciting news! Spherion Staffing has partnered with leading boat manufacturer, Alumacraft in St. Peter, and we are seeking dedicated Assemblers to join the Alumacraft family! These positions are long-term, DIRECT HIRE WITH GREAT PAY AND FULL BENEFITS. Hours for 1st shift are Monday - Thursday from 6:00 a.m. - 4:30 p.m. with OT on Fridays (as needed).Responsibilities:Installing interior boat components such as brackets etc., carpeting, gluing, sawing, filing, glue gun usage, stapling, vacuuming, and foaming gun use.Select and prepare components for boats, inspect quality of material prior to and following installation using tape measure, jigs, and gauges to insure proper fit and alignment of interior boat components.Inserting die corresponding to size of rivet head in hammer.Dressing triggers to pound and shape head on rivet shank.Drilling holes using air drill.Helps to physically move boat from station to station.May clean or align holes and make adjustments to fit parts.Able to work different stations to meet production needs.Working hours: 6:00 AM - 4:30 PMSkills:Ability to stand and work in various positions for several hours on concreteAbility to see and read complicated instructionsMust be accurate and detail orientated.Education:No Degree RequiredExperience:0-1 yearsQualifications:Strong attendance record.Ability to manually move product and materials up to 50 lbs. through regular physical exertion, including but not limited to climbing, lifting, carrying, pushing pulling and bending. DON'T WAIT, APPLY TODAY! Call Jennifer to schedule a phone interview with Jennifer ASAP at 507-317-6788 they are going quick!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        DIRECT HIRE ALERT!!! We have exciting news! Spherion Staffing has partnered with leading boat manufacturer, Alumacraft in St. Peter, and we are seeking dedicated Assemblers to join the Alumacraft family! These positions are long-term, DIRECT HIRE WITH GREAT PAY AND FULL BENEFITS. Hours for 1st shift are Monday - Thursday from 6:00 a.m. - 4:30 p.m. with OT on Fridays (as needed).Responsibilities:Installing interior boat components such as brackets etc., carpeting, gluing, sawing, filing, glue gun usage, stapling, vacuuming, and foaming gun use.Select and prepare components for boats, inspect quality of material prior to and following installation using tape measure, jigs, and gauges to insure proper fit and alignment of interior boat components.Inserting die corresponding to size of rivet head in hammer.Dressing triggers to pound and shape head on rivet shank.Drilling holes using air drill.Helps to physically move boat from station to station.May clean or align holes and make adjustments to fit parts.Able to work different stations to meet production needs.Working hours: 6:00 AM - 4:30 PMSkills:Ability to stand and work in various positions for several hours on concreteAbility to see and read complicated instructionsMust be accurate and detail orientated.Education:No Degree RequiredExperience:0-1 yearsQualifications:Strong attendance record.Ability to manually move product and materials up to 50 lbs. through regular physical exertion, including but not limited to climbing, lifting, carrying, pushing pulling and bending. DON'T WAIT, APPLY TODAY! Call Jennifer to schedule a phone interview with Jennifer ASAP at 507-317-6788 they are going quick!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Saint Peter, Minnesota
        • Permanent
        • $19.75 - $33.00 per hour
        • 6:00 AM - 4:00 PM
        DIRECT HIRE- Spherion, in Partnership with ALUMACRAFT is looking for experienced MIG/TIG welders working with aluminium. We have an amazing opportunity to build and expand on your welding experience! This is a DIrect Hire position that includes EXCELLENT PAY AND BENEFITS 1st shift: Monday -Thursday 6:00 a.m. - 4:30 p.m., OT on Fridays (as needed)Pay rate is determined by experience and skill set, with opportunity for substantial increases based on performance, growth, and attendance during your first year of employment. Don't miss out on this great opportunity!Responsibilities:- Operate safety equipment and use safe work habits.- Weld components in flat, vertical, or overhead positions.- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.- Detect faulty operation of equipment or defective materials and notify supervisors.- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material- Examine product for defects and measure to ensure conformance with specifications.- Recognize, set up, and operate hand and power tools common to the welding trade- Lay out, position, align, and secure parts and assemblies prior to assembly- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, etc- Analyze engineering drawings, blueprints, specifications, sketches, work orders, etc.- Fill holes, and increase the size of metal parts.Working hours: 6:00 AM - 4:00 PMSkills:Ability to read and interpret work instructions and printsMeasuring and reading tolerancesEducation:High SchoolExperience:0-1 yearsQualifications:6+ months of MIG & TIG welding experienceAluminum welding experience required. DON'T WAIT, APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        DIRECT HIRE- Spherion, in Partnership with ALUMACRAFT is looking for experienced MIG/TIG welders working with aluminium. We have an amazing opportunity to build and expand on your welding experience! This is a DIrect Hire position that includes EXCELLENT PAY AND BENEFITS 1st shift: Monday -Thursday 6:00 a.m. - 4:30 p.m., OT on Fridays (as needed)Pay rate is determined by experience and skill set, with opportunity for substantial increases based on performance, growth, and attendance during your first year of employment. Don't miss out on this great opportunity!Responsibilities:- Operate safety equipment and use safe work habits.- Weld components in flat, vertical, or overhead positions.- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.- Detect faulty operation of equipment or defective materials and notify supervisors.- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material- Examine product for defects and measure to ensure conformance with specifications.- Recognize, set up, and operate hand and power tools common to the welding trade- Lay out, position, align, and secure parts and assemblies prior to assembly- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, etc- Analyze engineering drawings, blueprints, specifications, sketches, work orders, etc.- Fill holes, and increase the size of metal parts.Working hours: 6:00 AM - 4:00 PMSkills:Ability to read and interpret work instructions and printsMeasuring and reading tolerancesEducation:High SchoolExperience:0-1 yearsQualifications:6+ months of MIG & TIG welding experienceAluminum welding experience required. DON'T WAIT, APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Saint Peter, Minnesota
        • Permanent
        • $19.75 - $33.00 per hour
        • 5:00 PM - 3:30 AM
        DIRECT HIRE- Spherion, in Partnership with ALUMACRAFT is looking for experienced MIG/TIG welders working with aluminium. We have an amazing opportunity to build and expand on your welding experience! This is a DIrect Hire position that includes EXCELLENT PAY AND BENEFITS 2nd shift: Monday -Thursday 5:00 p.m. - 3:30 a.m., OT on Fridays (as needed)Pay rate is determined by experience and skill set, with opportunity for substantial increases based on performance, growth, and attendance during your first year of employment. Don't miss out on this great opportunity!Responsibilities:- Operate safety equipment and use safe work habits.- Weld components in flat, vertical, or overhead positions.- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.- Detect faulty operation of equipment or defective materials and notify supervisors.- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material- Examine product for defects and measure to ensure conformance with specifications.- Recognize, set up, and operate hand and power tools common to the welding trade- Lay out, position, align, and secure parts and assemblies prior to assembly- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, etc- Analyze engineering drawings, blueprints, specifications, sketches, work orders, etc.- Fill holes, and increase the size of metal parts.Working hours: 5:00 PM - 3:30 AMSkills:Ability to read and interpret work instructions and printsMeasuring and reading tolerancesEducation:High SchoolExperience:0-1 yearsQualifications:6+ months of MIG & TIG welding experienceAluminum welding experience required. DON'T WAIT, APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        DIRECT HIRE- Spherion, in Partnership with ALUMACRAFT is looking for experienced MIG/TIG welders working with aluminium. We have an amazing opportunity to build and expand on your welding experience! This is a DIrect Hire position that includes EXCELLENT PAY AND BENEFITS 2nd shift: Monday -Thursday 5:00 p.m. - 3:30 a.m., OT on Fridays (as needed)Pay rate is determined by experience and skill set, with opportunity for substantial increases based on performance, growth, and attendance during your first year of employment. Don't miss out on this great opportunity!Responsibilities:- Operate safety equipment and use safe work habits.- Weld components in flat, vertical, or overhead positions.- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.- Detect faulty operation of equipment or defective materials and notify supervisors.- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material- Examine product for defects and measure to ensure conformance with specifications.- Recognize, set up, and operate hand and power tools common to the welding trade- Lay out, position, align, and secure parts and assemblies prior to assembly- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, etc- Analyze engineering drawings, blueprints, specifications, sketches, work orders, etc.- Fill holes, and increase the size of metal parts.Working hours: 5:00 PM - 3:30 AMSkills:Ability to read and interpret work instructions and printsMeasuring and reading tolerancesEducation:High SchoolExperience:0-1 yearsQualifications:6+ months of MIG & TIG welding experienceAluminum welding experience required. DON'T WAIT, APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Le Sueur, Minnesota
        • Temp to Perm
        • $13.50 - $14.50 per hour
        • Various Shifts Available
        Spherion with another great entry-level opportunity for you, this one is entry-level. Learn to work in a growing manufacturing facility offering long-term positions with the opportunity to roll over to full-time. This client is willing to train those with no manufacturing experience, which is great!SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $13.502nd shift 3:00 pm - 11:20 pm Mon- Fri - $14.503rd shift 11:00 pm - 7:20 am Mon - Fri - $14.50Responsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions.Operate pallet jack, etc. to load and unload trucks or transport raw material, supplies and products.Set up and use a variety of powered or hand tools to finish edges, glue, remove flash, clear holes, assemble, trim and pack product or parts into shipping cartons.Stand and work at an assigned workstation (s). Processes and operations may be repetitive.Assist elsewhere whenever and wherever needed.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion with another great entry-level opportunity for you, this one is entry-level. Learn to work in a growing manufacturing facility offering long-term positions with the opportunity to roll over to full-time. This client is willing to train those with no manufacturing experience, which is great!SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $13.502nd shift 3:00 pm - 11:20 pm Mon- Fri - $14.503rd shift 11:00 pm - 7:20 am Mon - Fri - $14.50Responsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions.Operate pallet jack, etc. to load and unload trucks or transport raw material, supplies and products.Set up and use a variety of powered or hand tools to finish edges, glue, remove flash, clear holes, assemble, trim and pack product or parts into shipping cartons.Stand and work at an assigned workstation (s). Processes and operations may be repetitive.Assist elsewhere whenever and wherever needed.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

      Thank you for subscribing to your personalized job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.