Thank you for subscribing to your personalized job alerts.

    117 jobs found in Minnesota

    Filter2
    Clear all
      • Duluth, Minnesota
      • Temp to Perm
      • $15.00 per hour
      • 7:00 AM - 3:30 PM
      Performs fabrication and repetitive line assembly functions in the production of electronic devices (including, but not limited to: components, sub-assemblies, etc.)Responsibilities:-Operates equipment in performing alignment, masking, potting, encapsulating, epoxy and color coding-Reads work orders, follows production drawing and sample assemblies-Tends machines that wind, solder and test components (i.e., wire rack installation and wire threading through nozzles, etc.)-Performs online testing and inspection to ensure parts and assemblies meet production specifications and standards-Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device-Crimps, solders, cements, press fits or performs similar operations to join or secure parts in place-Assembles components; connects component lead wires; assembles and attaches hardware; adjusts or trims materials to achieve electrical characteristicsWorking hours: 7:00 AM - 3:30 PMSkills:-Applies acquired job skills and company policies and procedures. -Attention to detail-Previous electronic assembly preferred but not required.Education:High SchoolExperience:1-4 yearsQualifications:Experience/Education:List (A) Min. level of formal education (or equivalent) required to do the job; (B) Specific/special courses required; (C) Years and type of prior experience required; (D) Training and job orientation time required to perform the job satisfactorily. GED or equivalent and/or 1 - 2 years of related experience; Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Performs fabrication and repetitive line assembly functions in the production of electronic devices (including, but not limited to: components, sub-assemblies, etc.)Responsibilities:-Operates equipment in performing alignment, masking, potting, encapsulating, epoxy and color coding-Reads work orders, follows production drawing and sample assemblies-Tends machines that wind, solder and test components (i.e., wire rack installation and wire threading through nozzles, etc.)-Performs online testing and inspection to ensure parts and assemblies meet production specifications and standards-Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device-Crimps, solders, cements, press fits or performs similar operations to join or secure parts in place-Assembles components; connects component lead wires; assembles and attaches hardware; adjusts or trims materials to achieve electrical characteristicsWorking hours: 7:00 AM - 3:30 PMSkills:-Applies acquired job skills and company policies and procedures. -Attention to detail-Previous electronic assembly preferred but not required.Education:High SchoolExperience:1-4 yearsQualifications:Experience/Education:List (A) Min. level of formal education (or equivalent) required to do the job; (B) Specific/special courses required; (C) Years and type of prior experience required; (D) Training and job orientation time required to perform the job satisfactorily. GED or equivalent and/or 1 - 2 years of related experience; Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $19.00 per hour
      • 4:30 PM - 3:00 AM
      Hi, hi, you mechanical genius. You, the person comfortable working from prints, and using basic hand tools; we have the perfect opportunity for you! We are looking for assemblers who want to work right here in Mankato -- for client that just did a payrate overhaul! This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 4:30PM-3:00AM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 4:30 PM - 3:00 AMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Hi, hi, you mechanical genius. You, the person comfortable working from prints, and using basic hand tools; we have the perfect opportunity for you! We are looking for assemblers who want to work right here in Mankato -- for client that just did a payrate overhaul! This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 4:30PM-3:00AM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 4:30 PM - 3:00 AMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $15.00 per hour
      • 3:30 PM - 2:00 AM
      Jobs! Jobs! Jobs! Did you know, Spherion has partned with a fabulous electronics manufacturer right here in Mankato; we are seeking out both skilled and entry-level assemblers to work on their afternoon shift. This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 3:30 PM - 2:00 AMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Jobs! Jobs! Jobs! Did you know, Spherion has partned with a fabulous electronics manufacturer right here in Mankato; we are seeking out both skilled and entry-level assemblers to work on their afternoon shift. This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 3:30 PM - 2:00 AMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $14.50 per hour
      • 7:00 AM - 3:00 PM
      Our client in North Mankato needs assemblers, people who want to work FT hours, and learn new skills on the job! Entry level position in the Assembly Department for training and learning assembly processes. Assembles and tests sub-assemblies for finished products, valves, or hydraulic cylinders. Performs the following duties under the close supervision of a Manufacturing Supervisor.Responsibilities:Will include, but not limited to the following areas:Gathers blueprints, routing sheets, setting specifications, and all related fixtures and tools necessary to assembly the products when directed. Moves parts to assembly area from storage racks. Fastens parts together with bolts, screws, speed clips, or other fasteners. Uses blueprints, routing sheets, settings specifications, required hand tools and fixtures, and test benches to assist in assembly operation. Uses a variety of hand tools in a safe manner. Assembles parts into repair kits and switches; then packages and moves the products to the shipping department for further processing. Replaces all paper work from assigned job(s); cleans workstation and area for next job. Inspects products prior to packaging and returns rejected products to production departments.Observes packaging operations and inspects containers to verify conformance to specifications.Requisitions containers and other supplies of delivery to work stations.Establishes or adjusts work procedures to meet production schedules. Tallies number of products packaged or records information such as type of products packaged.Learns and maintains time and production records.Operates pallet jack to assist in loading or moving materials and products. Packs parts properly to prevent damage during transportation to next operation. Works overtime as requested/required by supervisor.Follows and monitors work instructions and ISO procedures.Looks for and recommends product and process improvements in support of corporate goals, objectives and activities.Working hours: 7:00 AM - 3:00 PMSkills:Ability to read and understand work instructions. Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, Engineering prints and drawings as well as procedure manuals. Ability to communicate effectively with shipping clerks, other assembly and shop personnel.Education:High SchoolExperience:0-1 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or disabilities to perform the essential functions.High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client in North Mankato needs assemblers, people who want to work FT hours, and learn new skills on the job! Entry level position in the Assembly Department for training and learning assembly processes. Assembles and tests sub-assemblies for finished products, valves, or hydraulic cylinders. Performs the following duties under the close supervision of a Manufacturing Supervisor.Responsibilities:Will include, but not limited to the following areas:Gathers blueprints, routing sheets, setting specifications, and all related fixtures and tools necessary to assembly the products when directed. Moves parts to assembly area from storage racks. Fastens parts together with bolts, screws, speed clips, or other fasteners. Uses blueprints, routing sheets, settings specifications, required hand tools and fixtures, and test benches to assist in assembly operation. Uses a variety of hand tools in a safe manner. Assembles parts into repair kits and switches; then packages and moves the products to the shipping department for further processing. Replaces all paper work from assigned job(s); cleans workstation and area for next job. Inspects products prior to packaging and returns rejected products to production departments.Observes packaging operations and inspects containers to verify conformance to specifications.Requisitions containers and other supplies of delivery to work stations.Establishes or adjusts work procedures to meet production schedules. Tallies number of products packaged or records information such as type of products packaged.Learns and maintains time and production records.Operates pallet jack to assist in loading or moving materials and products. Packs parts properly to prevent damage during transportation to next operation. Works overtime as requested/required by supervisor.Follows and monitors work instructions and ISO procedures.Looks for and recommends product and process improvements in support of corporate goals, objectives and activities.Working hours: 7:00 AM - 3:00 PMSkills:Ability to read and understand work instructions. Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, Engineering prints and drawings as well as procedure manuals. Ability to communicate effectively with shipping clerks, other assembly and shop personnel.Education:High SchoolExperience:0-1 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or disabilities to perform the essential functions.High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Sueur, Minnesota
      • Temp to Perm
      • $17.00 - $18.50 per hour
      • Various Shifts Available
      Spherion with another great manufacturing opportunity for you, this one is for a few skilled production operators. This client is willing to train those with no CNC or machining experience, which is great! In this role you will be: assisting with setup, responsible for quality of work and to appropriately resolve unusual operating conditions.SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $17.002nd shift 3:00 pm - 11:20 pm Mon- Fri - $18.50Responsibilities:Proficiently operates molding, injection, machining, casting, CNC and other manufacturing machines.Rotates to operate on various machines and various processes to fabricate products ranging from simple to elaborate. Generally works at an assigned work station. Does Not ordinarily perform machine setups, but does assist. Maintains equipment and performs lesser repairs.Inspects for quality, defects, and deviations from specifications. Responsible for quality of work and to appropriately resolve unusual operating conditions. Work is generally concentrated on similar machines and processes and operations.May assemble, pack and/or package a wide variety of products or materials. May occasionally operate a forklift. All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English, independent decision making, effective self- management, proven machine operations and/or mechanical aptitude.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs.High School Diploma or GED Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion with another great manufacturing opportunity for you, this one is for a few skilled production operators. This client is willing to train those with no CNC or machining experience, which is great! In this role you will be: assisting with setup, responsible for quality of work and to appropriately resolve unusual operating conditions.SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $17.002nd shift 3:00 pm - 11:20 pm Mon- Fri - $18.50Responsibilities:Proficiently operates molding, injection, machining, casting, CNC and other manufacturing machines.Rotates to operate on various machines and various processes to fabricate products ranging from simple to elaborate. Generally works at an assigned work station. Does Not ordinarily perform machine setups, but does assist. Maintains equipment and performs lesser repairs.Inspects for quality, defects, and deviations from specifications. Responsible for quality of work and to appropriately resolve unusual operating conditions. Work is generally concentrated on similar machines and processes and operations.May assemble, pack and/or package a wide variety of products or materials. May occasionally operate a forklift. All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English, independent decision making, effective self- management, proven machine operations and/or mechanical aptitude.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs.High School Diploma or GED Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Sueur, Minnesota
      • Temp to Perm
      • $13.50 - $14.50 per hour
      • Various Shifts Available
      Spherion with another great entry-level opportunity for you, this one is entry-level. Learn to work in a growing manufacturing facility offering long-term positions with the opportunity to roll over to full-time. This client is willing to train those with no manufacturing experience, which is great!SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $13.502nd shift 3:00 pm - 11:20 pm Mon- Fri - $14.503rd shift 11:00 pm - 7:20 am Mon - Fri - $14.50Responsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions.Operate pallet jack, etc. to load and unload trucks or transport raw material, supplies and products.Set up and use a variety of powered or hand tools to finish edges, glue, remove flash, clear holes, assemble, trim and pack product or parts into shipping cartons.Stand and work at an assigned workstation (s). Processes and operations may be repetitive.Assist elsewhere whenever and wherever needed.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion with another great entry-level opportunity for you, this one is entry-level. Learn to work in a growing manufacturing facility offering long-term positions with the opportunity to roll over to full-time. This client is willing to train those with no manufacturing experience, which is great!SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $13.502nd shift 3:00 pm - 11:20 pm Mon- Fri - $14.503rd shift 11:00 pm - 7:20 am Mon - Fri - $14.50Responsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions.Operate pallet jack, etc. to load and unload trucks or transport raw material, supplies and products.Set up and use a variety of powered or hand tools to finish edges, glue, remove flash, clear holes, assemble, trim and pack product or parts into shipping cartons.Stand and work at an assigned workstation (s). Processes and operations may be repetitive.Assist elsewhere whenever and wherever needed.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 6:00 AM - 2:30 PM
      Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assemblyMaintain a clean and safe workspaceLight material handlingGeneral assembly functionsUse of hand toolsAll other duties as assigned by your managerWorking hours: 6:00 AM - 2:30 PMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAYSpherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assemblyMaintain a clean and safe workspaceLight material handlingGeneral assembly functionsUse of hand toolsAll other duties as assigned by your managerWorking hours: 6:00 AM - 2:30 PMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAYSpherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $16.50 per hour
      • 2:30 PM - 1:00 AM
      NEW PAY RATE ALERT! Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assembly.All other duties as assigned by your manager. ValuesWorking hours: 2:30 PM - 1:00 AMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      NEW PAY RATE ALERT! Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assembly.All other duties as assigned by your manager. ValuesWorking hours: 2:30 PM - 1:00 AMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temporary
      • $16.75 per hour
      • 4:00 PM - 1:00 AM
      Look at us over here filling allllllll of the 2nd shift positions--great hours, competative pay, awesome right? We have a client in need of assembly workers right here in Mankato. Oh, you don't have experience with assembly? That is OKAY! This client is willing to train, bright, motivated individuals likes yourself, so have no fear!(4) 10 hour shifts Monday - Thursday; take Fridays off!Responsibilities:Performs assembly on assigned products using machinery and/or tools as well as correct production methods to ensure accuracy and quality of finished products. Maintains production output levels consistent with set standards. May perform testing, quality inspections and reworking of deficient components and/or finished products to ensure efficient operation.Ability to read and utilize work orders in the production process. Informs management on issues related to quality, production, and/or safety which may adversely impact meeting the areas goals. Manages parts bin quantities and notifies the production supervisor or lead person when quantities are low or insufficient to maintain production.Documents actions by completing required production and quality forms.Maintains a clean and safe work area by complying with company procedures.Monitors machinery and advises maintenance of necessary repairs.Performs other duties as assigned.Working hours: 4:00 PM - 1:00 AMSkills:Good attendanceAssembly experience is a plus, but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand for 8 hours APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Look at us over here filling allllllll of the 2nd shift positions--great hours, competative pay, awesome right? We have a client in need of assembly workers right here in Mankato. Oh, you don't have experience with assembly? That is OKAY! This client is willing to train, bright, motivated individuals likes yourself, so have no fear!(4) 10 hour shifts Monday - Thursday; take Fridays off!Responsibilities:Performs assembly on assigned products using machinery and/or tools as well as correct production methods to ensure accuracy and quality of finished products. Maintains production output levels consistent with set standards. May perform testing, quality inspections and reworking of deficient components and/or finished products to ensure efficient operation.Ability to read and utilize work orders in the production process. Informs management on issues related to quality, production, and/or safety which may adversely impact meeting the areas goals. Manages parts bin quantities and notifies the production supervisor or lead person when quantities are low or insufficient to maintain production.Documents actions by completing required production and quality forms.Maintains a clean and safe work area by complying with company procedures.Monitors machinery and advises maintenance of necessary repairs.Performs other duties as assigned.Working hours: 4:00 PM - 1:00 AMSkills:Good attendanceAssembly experience is a plus, but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand for 8 hours APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Center, Minnesota
      • Temp to Perm
      • $13.00 - $13.50 per hour
      • 6:00 AM - 2:00 PM
      We love coffee, allllllllll of the coffee, and if you do too, then maybe we should discuss this job opportunity! Spherion in partnership with our client in Le Center, MN is looking for coffee roasters. Make what you LOVE and get a little discount as well, talk about having your cake and eating it too! It's the BEST!Responsibilities:Roasting coffee to customer specificationsDaily inventoryRoaster cleaning and basic maintenanceKeep roasting area cleanGrind coffee to customer specifications Keep production informed of low green coffeePull green coffee beans to be roastedRecording batch information for each roastOperate within standard operating proceduresOperate forklift and pallet jackWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to lift 30-70lbs frequently in a safe manner.Able to push/pull 70+ poundsAble to work overtime with no noticeAble to multi-taskAble to stand for an 8+ hour shift If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We love coffee, allllllllll of the coffee, and if you do too, then maybe we should discuss this job opportunity! Spherion in partnership with our client in Le Center, MN is looking for coffee roasters. Make what you LOVE and get a little discount as well, talk about having your cake and eating it too! It's the BEST!Responsibilities:Roasting coffee to customer specificationsDaily inventoryRoaster cleaning and basic maintenanceKeep roasting area cleanGrind coffee to customer specifications Keep production informed of low green coffeePull green coffee beans to be roastedRecording batch information for each roastOperate within standard operating proceduresOperate forklift and pallet jackWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to lift 30-70lbs frequently in a safe manner.Able to push/pull 70+ poundsAble to work overtime with no noticeAble to multi-taskAble to stand for an 8+ hour shift If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Center, Minnesota
      • Temp to Perm
      • $12.00 - $13.00 per hour
      • 6:00 AM - 2:00 PM
      Is there any better smell than roasted coffee beans? If you love that smell, this position would be right up your alley! Spherion in partnership with their client in Le Center, MN is looking for packagers, bulk packagers. Help make what you LOVE and get a little discount as well, talk about having your cake and eating it too!Responsibilities:Reads work orders to determine what items must be gathered.Pulls customer orders from stock and places orders in appropriate shipping areaWraps protective material around product.Weighs product and adjusts quantity.Folds and/or tapes to seal bags/boxes.Labels products.Packs special arrangements or selections of product.Inspects materials, products, and containers at each step of packaging process.Uses computer to record information such as weight and date packaged.Be mindful of and adhere to GMP?s, Quality and Food Safety requirements.Be able to successfully identify when quality control measures are needed and follow through as required.Strict adherence to all company policies, procedures and safety rules.Detailed orientedWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:At minimum, a High School Diploma (or an equivalent such as a GED) is required.Attention to detail in a fast paced environment.Ability to read, write and interpret basic correspondence in English.Basic computer experience, including Microsoft excel and Word.Consistent and punctual attendance.Able to lift 30 to 50lbs frequently in a safe manner.Ability to successfully complete the pre-employment process. If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Is there any better smell than roasted coffee beans? If you love that smell, this position would be right up your alley! Spherion in partnership with their client in Le Center, MN is looking for packagers, bulk packagers. Help make what you LOVE and get a little discount as well, talk about having your cake and eating it too!Responsibilities:Reads work orders to determine what items must be gathered.Pulls customer orders from stock and places orders in appropriate shipping areaWraps protective material around product.Weighs product and adjusts quantity.Folds and/or tapes to seal bags/boxes.Labels products.Packs special arrangements or selections of product.Inspects materials, products, and containers at each step of packaging process.Uses computer to record information such as weight and date packaged.Be mindful of and adhere to GMP?s, Quality and Food Safety requirements.Be able to successfully identify when quality control measures are needed and follow through as required.Strict adherence to all company policies, procedures and safety rules.Detailed orientedWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:At minimum, a High School Diploma (or an equivalent such as a GED) is required.Attention to detail in a fast paced environment.Ability to read, write and interpret basic correspondence in English.Basic computer experience, including Microsoft excel and Word.Consistent and punctual attendance.Able to lift 30 to 50lbs frequently in a safe manner.Ability to successfully complete the pre-employment process. If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $20.00 - $26.00 per hour
      • 3:30 PM - 2:00 AM
      Spherion is partnering with a premier electronics manufacturer here in Mankato and offering a DIRECT HIRE Production Supervisor position on 2nd shift -- work immediately for the client and have access to all of their fabulous benefits! Hours are Monday - Thursday from 3:30 p.m. - 2:00 a.m. with OT on Friday, as needed.Responsibilities:Monitor the efficiency of daily production based on safety, quality measures, costs, customer service, and production performance to meet customer satisfactionMaintain a positive attitude will all employees wile providing direction as a strong leaderPromote and develop at team-based working environmentHands on supervision with the ability to run equipment on the production floor as neededProvide training to accomplish the company goals and objectivesAll other duties as assigned by your supervisor/managerWorking hours: 3:30 PM - 2:00 AMSkills:Strong leadership capabilitiesSuperior interpersonal and communication skillsBasic knowledge of Microsoft OfficeAbility to multitask and prioritizeStrong problem-solving skillsAbility to work with a team or independently as neededMust be able to read, write, communicate, and comprehend the English languageMust pass a pre-employment drug screening test and criminal background checkMust be able to meet all physical requirements as outlined in this position descriptionMust follow all company policies outlined in the Employee Handbook of Personnel PoliciesComplete all orientation and training needs as written in policyEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or equivalent requiredTwo- or four-year degree preferred1 year supervisory/management experience APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is partnering with a premier electronics manufacturer here in Mankato and offering a DIRECT HIRE Production Supervisor position on 2nd shift -- work immediately for the client and have access to all of their fabulous benefits! Hours are Monday - Thursday from 3:30 p.m. - 2:00 a.m. with OT on Friday, as needed.Responsibilities:Monitor the efficiency of daily production based on safety, quality measures, costs, customer service, and production performance to meet customer satisfactionMaintain a positive attitude will all employees wile providing direction as a strong leaderPromote and develop at team-based working environmentHands on supervision with the ability to run equipment on the production floor as neededProvide training to accomplish the company goals and objectivesAll other duties as assigned by your supervisor/managerWorking hours: 3:30 PM - 2:00 AMSkills:Strong leadership capabilitiesSuperior interpersonal and communication skillsBasic knowledge of Microsoft OfficeAbility to multitask and prioritizeStrong problem-solving skillsAbility to work with a team or independently as neededMust be able to read, write, communicate, and comprehend the English languageMust pass a pre-employment drug screening test and criminal background checkMust be able to meet all physical requirements as outlined in this position descriptionMust follow all company policies outlined in the Employee Handbook of Personnel PoliciesComplete all orientation and training needs as written in policyEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or equivalent requiredTwo- or four-year degree preferred1 year supervisory/management experience APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 per hour
      • 6:00 PM - 6:00 PM
      Are you a night owl? Do you know someone who is a night owl, only seeking out work when the sun goes down? We are working with a large manufacturer right here in central Mankato offering full-time positions on nights. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.2 days on, 2 days off, 3 days on, 2 days off, rotating shift - 6PM - 6AM; $18Responsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 PM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you a night owl? Do you know someone who is a night owl, only seeking out work when the sun goes down? We are working with a large manufacturer right here in central Mankato offering full-time positions on nights. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.2 days on, 2 days off, 3 days on, 2 days off, rotating shift - 6PM - 6AM; $18Responsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 PM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $21.00 per hour
      • 6:00 AM - 6:00 PM
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $18.26 - $19.12 per hour
      • 6:00 AM - 6:00 PM
      The job also involves stacking of plastic top frames, which is done manually, off the forklift. So it's not all seat time.Responsibilities:Someone with ample forklift experience. They should be willing to stay busy, because they will be.Working hours: 6:00 AM - 6:00 PMSkills:The ideal candidate would also have good organizational skills as they will be responsible for keeping the area in order.Education:High SchoolExperience:0-1 yearsQualifications:Forklift Certified Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The job also involves stacking of plastic top frames, which is done manually, off the forklift. So it's not all seat time.Responsibilities:Someone with ample forklift experience. They should be willing to stay busy, because they will be.Working hours: 6:00 AM - 6:00 PMSkills:The ideal candidate would also have good organizational skills as they will be responsible for keeping the area in order.Education:High SchoolExperience:0-1 yearsQualifications:Forklift Certified Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $17.08 per hour
      • 6:00 AM - 2:30 PM
      End line operator, responsible for packaging can ends as they come off the production line. May use a forklift to move product around the warehouse.Responsibilities:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PMSkills:1.-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.-End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8- hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:High SchoolExperience:0-1 yearsQualifications:???Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently???Stand, twist, bend and rotate ??? continuously, Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      End line operator, responsible for packaging can ends as they come off the production line. May use a forklift to move product around the warehouse.Responsibilities:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PMSkills:1.-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.-End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8- hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:High SchoolExperience:0-1 yearsQualifications:???Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently???Stand, twist, bend and rotate ??? continuously, Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Moorhead, Minnesota
      • Temp to Perm
      • $15.00 - $16.00 per hour
      • 5:00 AM - 1:30 PM
      Spherion Staffing is looking for full time 1st shift Manufacturing Associates to assist in the manufacture of pre-hung and slab interior and exterior doors. Includes stock and special order door types. Qualified applicants must be able to lift up to 50#'s repetitively and have previous warehouse/forklift experienceMonday-Friday 5 am-1:30 pmPay: $15-16/hour DOEResponsibilities:- Perform tasks related to the production of slabs and pre-hung units. Includes but not limited to building pre-hung units, transoms and side lights, applying spreader bars and fee, cutting and apply head stop, creating cut outs and cutting down doors/frames, manning the hanging table- Ensure quality product is being produced and meets specifications outlined in the order. If feasible, fix or repair raw materials so they can be used in production- Properly package doors or units in required manner to ensure minimal damage during movement and shipping- Properly document raw material substitutions to ensure accurate inventory and communication to line workers- Report any maintenance needs for line equipment to Line Lead for escalation to Production Foreman- Wear proper safety equipment and use proper safety techniques at all times- Assist in maintaining a clean production environment at all times. Includes but not limited to maintaining clean floor/walkways, emptying trash cans and recycling as appropriateResponsibilities:See aboveWorking hours: 5:00 AM - 1:30 PMSkills:Requirements: -Lifting of 50#'s frequently, and/or 20#s constantly to move objects by carrying, pushing, pulling or lifting-Good communication skills, both oral and written-Warehouse and forklift experience preferred-Ability to operate hand and power toolsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for full time 1st shift Manufacturing Associates to assist in the manufacture of pre-hung and slab interior and exterior doors. Includes stock and special order door types. Qualified applicants must be able to lift up to 50#'s repetitively and have previous warehouse/forklift experienceMonday-Friday 5 am-1:30 pmPay: $15-16/hour DOEResponsibilities:- Perform tasks related to the production of slabs and pre-hung units. Includes but not limited to building pre-hung units, transoms and side lights, applying spreader bars and fee, cutting and apply head stop, creating cut outs and cutting down doors/frames, manning the hanging table- Ensure quality product is being produced and meets specifications outlined in the order. If feasible, fix or repair raw materials so they can be used in production- Properly package doors or units in required manner to ensure minimal damage during movement and shipping- Properly document raw material substitutions to ensure accurate inventory and communication to line workers- Report any maintenance needs for line equipment to Line Lead for escalation to Production Foreman- Wear proper safety equipment and use proper safety techniques at all times- Assist in maintaining a clean production environment at all times. Includes but not limited to maintaining clean floor/walkways, emptying trash cans and recycling as appropriateResponsibilities:See aboveWorking hours: 5:00 AM - 1:30 PMSkills:Requirements: -Lifting of 50#'s frequently, and/or 20#s constantly to move objects by carrying, pushing, pulling or lifting-Good communication skills, both oral and written-Warehouse and forklift experience preferred-Ability to operate hand and power toolsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 6:00 AM - 3:10 PM
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:???Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 6:00 AM - 3:10 PMSkills:Reliable and dependabilityEducation:High SchoolExperience:0-1 yearsQualifications:???High School Diploma or equivalent???Required to pass a pre-employment Drug Screen and Background. Get your foot in the door at this amazing company! Apply NOW! DIRECT HIRE position with an Employee Owned Company that takes great care of their employees, and has much growth opportunity! The Benefit Package is OUTSTANDING! Medical, HRA with 100% Employer Contribution, FREE CLINIC, L/T & S/Term Disability & Life Insurance, PTO, Tuition Reimbursement, 401K and ESOP, and so much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:???Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 6:00 AM - 3:10 PMSkills:Reliable and dependabilityEducation:High SchoolExperience:0-1 yearsQualifications:???High School Diploma or equivalent???Required to pass a pre-employment Drug Screen and Background. Get your foot in the door at this amazing company! Apply NOW! DIRECT HIRE position with an Employee Owned Company that takes great care of their employees, and has much growth opportunity! The Benefit Package is OUTSTANDING! Medical, HRA with 100% Employer Contribution, FREE CLINIC, L/T & S/Term Disability & Life Insurance, PTO, Tuition Reimbursement, 401K and ESOP, and so much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Perham, Minnesota
      • Temporary
      • $16.00 - $18.00 per hour
      • 6:00 AM - 4:00 PM
      Spherion Staffing currently has an opening for a general laborer in Perham, MN. This is an opportunity to work for a growing company who is entering their busy season. This position requires repetitive heavy lifting and a shower after work. You will get dirty!Responsibilities:- Operate hand tool to grind out holes filled with dried feed on pellet mill rollers- Place roller in grinding machine- Sweep, keep work area clean and free of debris- Quality check parts upon completionWorking hours: 6:00 AM - 4:00 PMSkills:- Team player- Mechanically inclinedEducation:No Degree RequiredExperience:0-1 yearsQualifications:- Must be able to complete repetitive tasks- Ability to stand for long periods of time- Ability to lift up to 50 lbsSchedule:Mon - Fri 6 am - 4:30 pm. Willing to be flexible on schedule. To be considered, please apply online at www.spherion.com/perhamIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing currently has an opening for a general laborer in Perham, MN. This is an opportunity to work for a growing company who is entering their busy season. This position requires repetitive heavy lifting and a shower after work. You will get dirty!Responsibilities:- Operate hand tool to grind out holes filled with dried feed on pellet mill rollers- Place roller in grinding machine- Sweep, keep work area clean and free of debris- Quality check parts upon completionWorking hours: 6:00 AM - 4:00 PMSkills:- Team player- Mechanically inclinedEducation:No Degree RequiredExperience:0-1 yearsQualifications:- Must be able to complete repetitive tasks- Ability to stand for long periods of time- Ability to lift up to 50 lbsSchedule:Mon - Fri 6 am - 4:30 pm. Willing to be flexible on schedule. To be considered, please apply online at www.spherion.com/perhamIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 2:30 PM - 1:00 AM
      Spherion Staffing is looking for energetic and quality driven team members to join our client's manufacturing team in upper North Mankato! We currently have an open position in our clients press department running and operating equipment working the afternoon shift, perfect for you 'late risers'!. Shifts AvailableMon- Thursday 2:30PM-1:00AMResponsibilities:Set up and operate feeder end of pressRetrieve stock for jobs to be printed.Have knowledge of paper weights, finishes, grain, direction, etc.Obtain stock and cut it to specifications when necessary.Keep press properly supplied of ink, chemicals, blankets, etc.Notify lead operator of low inventory of house inks or paper.Ensure that equipment is cleaned and maintained in proper working condition. Notify lead operator of any concerns.Keep work area and equipment clean.Able to distinguish color variances while jobs are running on press.Perform other related duties as requested.Working hours: 2:30 PM - 1:00 AMSkills:Working ConditionsOn Feet entire shiftLifting up to 50 lbs.Repetitive bending, twisting, joggingEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma/GED and drug test required APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for energetic and quality driven team members to join our client's manufacturing team in upper North Mankato! We currently have an open position in our clients press department running and operating equipment working the afternoon shift, perfect for you 'late risers'!. Shifts AvailableMon- Thursday 2:30PM-1:00AMResponsibilities:Set up and operate feeder end of pressRetrieve stock for jobs to be printed.Have knowledge of paper weights, finishes, grain, direction, etc.Obtain stock and cut it to specifications when necessary.Keep press properly supplied of ink, chemicals, blankets, etc.Notify lead operator of low inventory of house inks or paper.Ensure that equipment is cleaned and maintained in proper working condition. Notify lead operator of any concerns.Keep work area and equipment clean.Able to distinguish color variances while jobs are running on press.Perform other related duties as requested.Working hours: 2:30 PM - 1:00 AMSkills:Working ConditionsOn Feet entire shiftLifting up to 50 lbs.Repetitive bending, twisting, joggingEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma/GED and drug test required APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $15.00 per hour
      • 7:00 AM - 3:30 PM
      JOBS! JOBS! JOBS! The ideal candidate for this position will need to be able to be cross-trained to perform a variety of tasks that may include: receive and sort laundry, inspect garment/coverall for all mending needs, operate equipment such as dryers and ironers, and bundling of clean garments to be re-distributed to customers.Responsibilities:Work in assigned area of production responsibility as scheduled in a safe and efficient manner.Attend departmental and branch meetings as needed to engage and complete education and training.Assist fellow production workers by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment.Consistently seek the improvement and development in assigned role/job and skills. Seek to develop multiple areas of capability in order to support the production team.Create and support a culture of adherence to branch standardization in support of, financial, service, and safety goals.Other duties as assigned by supervisor or manager.Working hours: 7:00 AM - 3:30 PMSkills:Basic Math reasoning skillsCapability to work in a fast-paced work environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:Lifting Ability; up to 25-50 pounds continuouslyAttendance is an essential function of the job Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      JOBS! JOBS! JOBS! The ideal candidate for this position will need to be able to be cross-trained to perform a variety of tasks that may include: receive and sort laundry, inspect garment/coverall for all mending needs, operate equipment such as dryers and ironers, and bundling of clean garments to be re-distributed to customers.Responsibilities:Work in assigned area of production responsibility as scheduled in a safe and efficient manner.Attend departmental and branch meetings as needed to engage and complete education and training.Assist fellow production workers by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment.Consistently seek the improvement and development in assigned role/job and skills. Seek to develop multiple areas of capability in order to support the production team.Create and support a culture of adherence to branch standardization in support of, financial, service, and safety goals.Other duties as assigned by supervisor or manager.Working hours: 7:00 AM - 3:30 PMSkills:Basic Math reasoning skillsCapability to work in a fast-paced work environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:Lifting Ability; up to 25-50 pounds continuouslyAttendance is an essential function of the job Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $16.00 - $17.50 per hour
      • Various Shifts Available
      You want to work part-time? Why not PICK THE DAYS YOU WORK? Spherion is partnering with Angie's to fill part-time packaging and production positions in their North Mankato plant. Basically, you can work 8-4 (days or nights) 3 days a week (have to be same days every week -- awesome right? The DAY shift pays $16/HR and the NIGHT shift pays $17.50/Hr -Responsibilities:Adhere to all safety policies and proceduresMaintain a clean and organized production area to promote a safe work environmentPre-inspect kettle popping/ packaging station to ensure all equipment is proper, intact and in safe working conditionNotify supervisor immediately if any unsafe or potentially hazardous conditions are discoveredProduction:Maintain and demonstrate a thorough understanding of processing specifications for varying products and materials.Identify and setup correct raw materials, recipes and utensils associated with each product.Execute exact measurements per recipe to ensure gold standard is met. Operate multiple electric kettles, simultaneously and efficiently.Add ingredients to electric kettle.Remove popped corn form kettles and dispense into bins.Effectively maintain kettle uptime to ensure efficient production flow for entire production shift.Monitor kettle performance and report kettle deficiencies to floor leadershipAssist with materials delivery as needed.Configure packaging equipment and materials for proper line setup during product changeovers and startupsAssemble corrugate items into cases or displays, package bags and palletize finished product to match specification Operate pallet jackWorking hours: Various Shifts AvailableSkills:Must be able to effectively use the English language, in verbal and written formMust be able to effectively communicate and interpret work instructions and safety rules using EnglishEducation:High SchoolExperience:0-1 yearsQualifications:Education and/or Experience:High school diploma or general education degree (GED)Three or more month's related experience or other food production experience or manufacturing experience APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      You want to work part-time? Why not PICK THE DAYS YOU WORK? Spherion is partnering with Angie's to fill part-time packaging and production positions in their North Mankato plant. Basically, you can work 8-4 (days or nights) 3 days a week (have to be same days every week -- awesome right? The DAY shift pays $16/HR and the NIGHT shift pays $17.50/Hr -Responsibilities:Adhere to all safety policies and proceduresMaintain a clean and organized production area to promote a safe work environmentPre-inspect kettle popping/ packaging station to ensure all equipment is proper, intact and in safe working conditionNotify supervisor immediately if any unsafe or potentially hazardous conditions are discoveredProduction:Maintain and demonstrate a thorough understanding of processing specifications for varying products and materials.Identify and setup correct raw materials, recipes and utensils associated with each product.Execute exact measurements per recipe to ensure gold standard is met. Operate multiple electric kettles, simultaneously and efficiently.Add ingredients to electric kettle.Remove popped corn form kettles and dispense into bins.Effectively maintain kettle uptime to ensure efficient production flow for entire production shift.Monitor kettle performance and report kettle deficiencies to floor leadershipAssist with materials delivery as needed.Configure packaging equipment and materials for proper line setup during product changeovers and startupsAssemble corrugate items into cases or displays, package bags and palletize finished product to match specification Operate pallet jackWorking hours: Various Shifts AvailableSkills:Must be able to effectively use the English language, in verbal and written formMust be able to effectively communicate and interpret work instructions and safety rules using EnglishEducation:High SchoolExperience:0-1 yearsQualifications:Education and/or Experience:High school diploma or general education degree (GED)Three or more month's related experience or other food production experience or manufacturing experience APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 6:00 AM - 6:00 PM
      Imagine having a 3 day weekend every other weekend this summer, or just working less days, total...in general! Spherion and our client are looking for Production Associates to work the DAY shift. The Production Associate is responsible for working safely and efficiently on the production line to process and package food that meets food safety and quality requirements. The DAY shift will be working 6:00AM-6:00PM. This shift will be working on a rotating basis and therefore will not be on the same days every week and will required you to work every other weekend.Responsibilities:Adhere to all safety policies and proceduresMaintain a clean and organized production area to promote a safe work environmentPre-inspect kettle popping/ packaging station to ensure all equipment is proper, intact and in safe working conditionNotify supervisor immediately if any unsafe or potentially hazardous conditions are discoveredProduction:Maintain and demonstrate a thorough understanding of processing specifications for varying products and materials.Identify and setup correct raw materials, recipes and utensils associated with each product.Execute exact measurements per recipe to ensure gold standard is met. Operate multiple electric kettles, simultaneously and efficiently.Add ingredients to electric kettle.Remove popped corn form kettles and dispense into bins.Effectively maintain kettle uptime to ensure efficient production flow for entire production shift.Monitor kettle performance and report kettle deficiencies to floor leadershipAssist with materials delivery as needed.Configure packaging equipment and materials for proper line setup during product changeovers and startupsAssemble corrugate items into cases or displays, package bags and palletize finished product to match specification Operate pallet jackWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to effectively use the English language, in verbal and written formMust be able to effectively communicate and interpret work instructions and safety rules using EnglishEducation:High SchoolExperience:0-1 yearsQualifications:Education and/or Experience:High school diploma or general education degree (GED)Three or more month's related experience or other food production experience or manufacturing experience APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Imagine having a 3 day weekend every other weekend this summer, or just working less days, total...in general! Spherion and our client are looking for Production Associates to work the DAY shift. The Production Associate is responsible for working safely and efficiently on the production line to process and package food that meets food safety and quality requirements. The DAY shift will be working 6:00AM-6:00PM. This shift will be working on a rotating basis and therefore will not be on the same days every week and will required you to work every other weekend.Responsibilities:Adhere to all safety policies and proceduresMaintain a clean and organized production area to promote a safe work environmentPre-inspect kettle popping/ packaging station to ensure all equipment is proper, intact and in safe working conditionNotify supervisor immediately if any unsafe or potentially hazardous conditions are discoveredProduction:Maintain and demonstrate a thorough understanding of processing specifications for varying products and materials.Identify and setup correct raw materials, recipes and utensils associated with each product.Execute exact measurements per recipe to ensure gold standard is met. Operate multiple electric kettles, simultaneously and efficiently.Add ingredients to electric kettle.Remove popped corn form kettles and dispense into bins.Effectively maintain kettle uptime to ensure efficient production flow for entire production shift.Monitor kettle performance and report kettle deficiencies to floor leadershipAssist with materials delivery as needed.Configure packaging equipment and materials for proper line setup during product changeovers and startupsAssemble corrugate items into cases or displays, package bags and palletize finished product to match specification Operate pallet jackWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to effectively use the English language, in verbal and written formMust be able to effectively communicate and interpret work instructions and safety rules using EnglishEducation:High SchoolExperience:0-1 yearsQualifications:Education and/or Experience:High school diploma or general education degree (GED)Three or more month's related experience or other food production experience or manufacturing experience APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Waseca, Minnesota
      • Permanent
      • $18.00 - $21.00 per hour
      • 6:00 AM - 2:25 PM
      The Extruder Technician role will be responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly.Responsibilities:??? Coordinate and supervise daily machine start up and shut down??? Understand product quality requirements, provide related guidance, and assure products produced conform??? Work to become Rhino???s extrusion and injection molding processing expert??? Troubleshoot product and process issues and problems??? Perform/Coordinate daily equipment maintenance as specified??? Assist with documentation of equipment operation and maintenance schedules/plans??? Gain proficiency in operation of all major equipment ??? Provide training and cross-training to designated personnel??? Provide input regarding equipment repair, upgrade, and replacement??? Promote culture of safety, efficiency, and teamworkWorking hours: 6:00 AM - 2:25 PMSkills:--Comfortable in a flexible team environment--Able to work well independently to complete daily workload--Quick Thinking, Ability to problem solve--Attention to detail--Mechanically inclined--Ability to think outside the box, with a goal of improving processes and systems--Follows directions and adheres to company policiesEducation:High SchoolExperience:4-7 yearsQualifications:??? High school diploma or equivalent??? 5+ years manufacturing experience, or equivalent??? Flexible, easy going, attitude??? Basic knowledge in math, addition, subtraction, multiplication, division, and percentages.??? Working knowledge of manufacturing equipment and tools.??? Possesses basic computer skills.??? Effective communication skills.??? Candidates must pass a pre-employment background check, drug screen and be eligible for employment without sponsorship. Direct Hire position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business.Company Benefits include:??? Medical insurance with company contribution, dental, vision, and supplemental life insurance programs also available. ??? Company paid life, short and long-term disability insurance??? Paid Holidays and paid time off??? Company sponsored retirement plan with matching contributionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Extruder Technician role will be responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly.Responsibilities:??? Coordinate and supervise daily machine start up and shut down??? Understand product quality requirements, provide related guidance, and assure products produced conform??? Work to become Rhino???s extrusion and injection molding processing expert??? Troubleshoot product and process issues and problems??? Perform/Coordinate daily equipment maintenance as specified??? Assist with documentation of equipment operation and maintenance schedules/plans??? Gain proficiency in operation of all major equipment ??? Provide training and cross-training to designated personnel??? Provide input regarding equipment repair, upgrade, and replacement??? Promote culture of safety, efficiency, and teamworkWorking hours: 6:00 AM - 2:25 PMSkills:--Comfortable in a flexible team environment--Able to work well independently to complete daily workload--Quick Thinking, Ability to problem solve--Attention to detail--Mechanically inclined--Ability to think outside the box, with a goal of improving processes and systems--Follows directions and adheres to company policiesEducation:High SchoolExperience:4-7 yearsQualifications:??? High school diploma or equivalent??? 5+ years manufacturing experience, or equivalent??? Flexible, easy going, attitude??? Basic knowledge in math, addition, subtraction, multiplication, division, and percentages.??? Working knowledge of manufacturing equipment and tools.??? Possesses basic computer skills.??? Effective communication skills.??? Candidates must pass a pre-employment background check, drug screen and be eligible for employment without sponsorship. Direct Hire position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business.Company Benefits include:??? Medical insurance with company contribution, dental, vision, and supplemental life insurance programs also available. ??? Company paid life, short and long-term disability insurance??? Paid Holidays and paid time off??? Company sponsored retirement plan with matching contributionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $20.00 per hour
      • 3:00 PM - 1:15 AM
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 1:15 AMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 1:15 AMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:CLASSIFICATIONS:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 7:00 AM - 3:15 PMSkills:-Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.-Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.-Fabricate components from blueprints and verbal instructions.-Perform assignments in accordance with written quality procedures.-Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.-Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! Medical & ST DisabilityHRA ? 100% Employer Contribution, helps pay medical deductibleFree Clinic ? For employees and dependentsLT Disability & Life Insurance ? 100% Employer Pai
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:CLASSIFICATIONS:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 7:00 AM - 3:15 PMSkills:-Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.-Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.-Fabricate components from blueprints and verbal instructions.-Perform assignments in accordance with written quality procedures.-Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.-Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! Medical & ST DisabilityHRA ? 100% Employer Contribution, helps pay medical deductibleFree Clinic ? For employees and dependentsLT Disability & Life Insurance ? 100% Employer Pai
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 3:00 PM - 1:15 AM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 3:00 PM - 1:15 AMSkills:--Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.--Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.--Fabricate components from blueprints and verbal instructions.--Perform assignments in accordance with written quality procedures.--Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.--Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:???The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.???The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.???Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.???Individuals will work near moving mechanical parts of machinery and electrically activated devices. ???Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division???Knowledge of decimals, fractions, and metric/English conversions???Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders???Lift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! ???Medical & ST Disability???HRA ??? 100% Employer Contribution, helps pay medical deductible???Free Clinic ??? For employees and dependents???LT Disability & Life Insurance
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 3:00 PM - 1:15 AMSkills:--Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.--Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.--Fabricate components from blueprints and verbal instructions.--Perform assignments in accordance with written quality procedures.--Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.--Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:???The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.???The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.???Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.???Individuals will work near moving mechanical parts of machinery and electrically activated devices. ???Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division???Knowledge of decimals, fractions, and metric/English conversions???Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders???Lift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! ???Medical & ST Disability???HRA ??? 100% Employer Contribution, helps pay medical deductible???Free Clinic ??? For employees and dependents???LT Disability & Life Insurance
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:30 PM
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 2:00 PM - 10:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Other duties as assignedWorking hours: 2:00 PM - 10:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:Required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesPHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands or fingers, and talk and hear, reach, bend, stoop, stand for long periods of time, reach over head, and lifting up to 50 lbs. ** DIRECT HIRE ** Great Benefits, Incl: Medical & Short-Term Disability- Low premium rates!HRA 100% Emplo
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Other duties as assignedWorking hours: 2:00 PM - 10:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:Required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesPHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands or fingers, and talk and hear, reach, bend, stoop, stand for long periods of time, reach over head, and lifting up to 50 lbs. ** DIRECT HIRE ** Great Benefits, Incl: Medical & Short-Term Disability- Low premium rates!HRA 100% Emplo
      • Faribault, Minnesota
      • Temp to Perm
      • $17.00 per hour
      • 6:00 AM - 2:30 PM
      A leader in portable and permanent power distribution solutions. Under the direction of the Supervisor and/or the Value Stream Manager, the Ditro Assembler will be responsible for building small electrical boxes to very large boxes. Must be able to follow blue pints and directions. This is a physical position.Responsibilities:Building small to very large boxesRead and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsPerform other duties and projects as assignedWorking hours: 6:00 AM - 2:30 PMSkills:--Ability to read instructions, safely operate machines and visually inspect parts produced--Accuracy and timeliness in completion of work assignments is a must--Excellent communication skills--Frequent lifting, standing, and bending required--Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts--Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A leader in portable and permanent power distribution solutions. Under the direction of the Supervisor and/or the Value Stream Manager, the Ditro Assembler will be responsible for building small electrical boxes to very large boxes. Must be able to follow blue pints and directions. This is a physical position.Responsibilities:Building small to very large boxesRead and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsPerform other duties and projects as assignedWorking hours: 6:00 AM - 2:30 PMSkills:--Ability to read instructions, safely operate machines and visually inspect parts produced--Accuracy and timeliness in completion of work assignments is a must--Excellent communication skills--Frequent lifting, standing, and bending required--Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts--Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 117 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.