Thank you for subscribing to your personalized job alerts.

    5 jobs found in west fargo

    Filter2
    • Industry1
      Working in
      Show 5 jobs
      Clear filter
    • Location1
      Location & range
        Show 5 jobs
        Clear filter
      • Job types
        Job types
        Show 5 jobs
        Clear filter
      • Salary
        Salary
        $
        Show 5 jobs
        Clear filter
      Clear all
        • West Fargo, North Dakota
        • Temp to Perm
        • $14.00 - $16.00 per hour
        • 6:00 AM - 4:30 PM
        Spherion Staffing is looking for several Truss Assemblers to work a full time day shift with a local company. This position will be assembling trusses as specified on production drawings using precut wood components and metal connector plates. Work with station crew members to meet production goals in a safe and efficient manner.Monday-Friday 6 am-4:30 pm (some Saturdays 8am-1 pm)Pay $14-16/hour DOEResponsibilities:- Maintain a safe and clean work environment by complying with company's safety policies- Verify that pre-cut parts for orders are the correct size, grade, angle and length- Perform quality checks on material prior to assembly and on completed truss prior ejecting off assemble table- Set truss jig on assembly table to match production drawings- Lift and place precut components in truss jig as specified on production drawings- Attach connector plates to truss joints, as specifies by production drawings, using a hammer- Operate preset roller to press connector plates into truss lumber- Eject completed truss to out-feed rollers to be transferred to truss finish rollerResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-Must have basic math skills-Ability to read tape measure-Ability to read and understand production drawings-Ability to operate pneumatic nail/staple gun-Ability to lift and carry up to 50 pounds -Ability to Lift /Push completed floor trusses weighing up to 75 lbs onto stacking cartEducation:High SchoolExperience:0-1 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is looking for several Truss Assemblers to work a full time day shift with a local company. This position will be assembling trusses as specified on production drawings using precut wood components and metal connector plates. Work with station crew members to meet production goals in a safe and efficient manner.Monday-Friday 6 am-4:30 pm (some Saturdays 8am-1 pm)Pay $14-16/hour DOEResponsibilities:- Maintain a safe and clean work environment by complying with company's safety policies- Verify that pre-cut parts for orders are the correct size, grade, angle and length- Perform quality checks on material prior to assembly and on completed truss prior ejecting off assemble table- Set truss jig on assembly table to match production drawings- Lift and place precut components in truss jig as specified on production drawings- Attach connector plates to truss joints, as specifies by production drawings, using a hammer- Operate preset roller to press connector plates into truss lumber- Eject completed truss to out-feed rollers to be transferred to truss finish rollerResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-Must have basic math skills-Ability to read tape measure-Ability to read and understand production drawings-Ability to operate pneumatic nail/staple gun-Ability to lift and carry up to 50 pounds -Ability to Lift /Push completed floor trusses weighing up to 75 lbs onto stacking cartEducation:High SchoolExperience:0-1 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • West Fargo, North Dakota
        • Temp to Perm
        • $19.00 - $22.00 per hour
        • 6:00 AM - 4:30 PM
        Spherion Staffing has multiple Press Brake Operator positions available on 1st shift.The Press Brake Operators will produce precision metal parts as specified by the work order, job specifications, and blueprints. The position performs all levels of set-ups, creates simple programs manually or using software, and prepares minor fixture designs for CNC lathes and millsMonday thru Thursday 6am to 4:30pmPay: $19-20/hour DOEResponsibilities:- Review work order to identify job specifications and required material and parts- Locate, measure, and check quality of material to be fabricated- Set-up, calibrate, and adjust machines and equipment to job specifications- Prepare and organize raw material on pallets to maximize workspace- Operate brake, shear, and press machinery to form raw material into parts according to job specifications and blueprints from work orders- Review completed work to ensure parts meet company and customer quality requirements in accordance with ISO 9001- Load and unload completed material and parts onto pallets- Track and record rejected parts, time cycles, production levels, and tool control- Follow safety precautions and company guidelines- Perform regular cleaning and maintenance duties on machines, tools, equipment, and work area by checking oil, changing oil filters, calibrating mechanisms, and checking for accuracy- Deliver cut material and parts to other departments for the next stage in processingResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-High School diploma or GED-2 plus years of prior work experience setting up machines, interpreting blueprints, drafting flat lay-outs, and operating CNC metal fabrication machinery-Must exhibit good attention to detail to identify and understand detailed job requirements and ensure job specifications are followed precisely-Ability to work independently with minimal supervision-Ability to use various tools, equipment, and machinery-Ability to see clearly to determine distances and shapesEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has multiple Press Brake Operator positions available on 1st shift.The Press Brake Operators will produce precision metal parts as specified by the work order, job specifications, and blueprints. The position performs all levels of set-ups, creates simple programs manually or using software, and prepares minor fixture designs for CNC lathes and millsMonday thru Thursday 6am to 4:30pmPay: $19-20/hour DOEResponsibilities:- Review work order to identify job specifications and required material and parts- Locate, measure, and check quality of material to be fabricated- Set-up, calibrate, and adjust machines and equipment to job specifications- Prepare and organize raw material on pallets to maximize workspace- Operate brake, shear, and press machinery to form raw material into parts according to job specifications and blueprints from work orders- Review completed work to ensure parts meet company and customer quality requirements in accordance with ISO 9001- Load and unload completed material and parts onto pallets- Track and record rejected parts, time cycles, production levels, and tool control- Follow safety precautions and company guidelines- Perform regular cleaning and maintenance duties on machines, tools, equipment, and work area by checking oil, changing oil filters, calibrating mechanisms, and checking for accuracy- Deliver cut material and parts to other departments for the next stage in processingResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-High School diploma or GED-2 plus years of prior work experience setting up machines, interpreting blueprints, drafting flat lay-outs, and operating CNC metal fabrication machinery-Must exhibit good attention to detail to identify and understand detailed job requirements and ensure job specifications are followed precisely-Ability to work independently with minimal supervision-Ability to use various tools, equipment, and machinery-Ability to see clearly to determine distances and shapesEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • West Fargo, North Dakota
        • Temp to Perm
        • $14.73 - $15.73 per hour
        • 6:00 AM - 4:30 PM
        Spherion Staffing has positions on both 1st and 2nd shifts for Assembly/Disassembly Technicians with a local manufacturing company. The Assembly/Disassembly Technicians will be cleaning parts in the assembly area and will operate a variety of tools and equipment to assemble and disassemble products in a manufacturing environment. This position will also be using a hoist/crane frequently.Pay is $14.73/hour + $1/hour shift differential for 2nd shift1st shift positions is 6am - 4:30pm Monday - Thursday2nd shift schedule is 4:15pm-2:45am Monday - Thursday**must be open to working overtime**Responsibilities:- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications- Use precision measuring devices to effectively assemble and/or disassemble final product - Perform preventive maintenance as required- Assist in identifying issues and initiating corrective action processes as necessary- Perform 5S Audits- Perform Safety Stop Audits observations as required- Identifies and accurately categorizes wear patterns of parts - Troubleshoot quality problemsResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements: -Minimum 2 years job related experience in a manufacturing environment preferred -Must have the ability to effectively interpret blueprints-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environment-Must have good oral and written communication skills -Ability to lift and carry up to 35 pounds -Drug, background screens and physicals are requiredEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has positions on both 1st and 2nd shifts for Assembly/Disassembly Technicians with a local manufacturing company. The Assembly/Disassembly Technicians will be cleaning parts in the assembly area and will operate a variety of tools and equipment to assemble and disassemble products in a manufacturing environment. This position will also be using a hoist/crane frequently.Pay is $14.73/hour + $1/hour shift differential for 2nd shift1st shift positions is 6am - 4:30pm Monday - Thursday2nd shift schedule is 4:15pm-2:45am Monday - Thursday**must be open to working overtime**Responsibilities:- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications- Use precision measuring devices to effectively assemble and/or disassemble final product - Perform preventive maintenance as required- Assist in identifying issues and initiating corrective action processes as necessary- Perform 5S Audits- Perform Safety Stop Audits observations as required- Identifies and accurately categorizes wear patterns of parts - Troubleshoot quality problemsResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements: -Minimum 2 years job related experience in a manufacturing environment preferred -Must have the ability to effectively interpret blueprints-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environment-Must have good oral and written communication skills -Ability to lift and carry up to 35 pounds -Drug, background screens and physicals are requiredEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • West Fargo, North Dakota
        • Temp to Perm
        • $19.00 - $25.00 per hour
        • 6:00 AM - 4:30 PM
        Spherion Staffing is assisting our client; a local industrial manufacturing company who is looking for 1st shift welders. The Welder positions will perform various types of weld and finishing operations and assist as needed with performing 5S Audits. Qualified candidates should have a 2 year Tech degree.6am - 4:30pm. Monday-Thursday; OT Fridays if neededPay $19-25/hour DOEResponsibilities:- Repair non-standard flaws with limited or no assistance- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications - Conduct pre and post inspection on all welded parts- Plan and make difficult or new setups with necessary equipment- Perform preventive maintenance as required- Perform 5S Audits- Perform Safety Stop Audits observations as required- Participate in the CI/PID ProcessResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-Two-year tech school degree or equivalent experience preferred-Minimum 2 years job related experience in a manufacturing environment preferred-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environment -Effective oral and written communication skills-Effective decision making, analytical, and problem solving skills-Ability to effectively interpret blueprints-Ability to organize and prioritize work-Ability to produce quality productsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is assisting our client; a local industrial manufacturing company who is looking for 1st shift welders. The Welder positions will perform various types of weld and finishing operations and assist as needed with performing 5S Audits. Qualified candidates should have a 2 year Tech degree.6am - 4:30pm. Monday-Thursday; OT Fridays if neededPay $19-25/hour DOEResponsibilities:- Repair non-standard flaws with limited or no assistance- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications - Conduct pre and post inspection on all welded parts- Plan and make difficult or new setups with necessary equipment- Perform preventive maintenance as required- Perform 5S Audits- Perform Safety Stop Audits observations as required- Participate in the CI/PID ProcessResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-Two-year tech school degree or equivalent experience preferred-Minimum 2 years job related experience in a manufacturing environment preferred-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environment -Effective oral and written communication skills-Effective decision making, analytical, and problem solving skills-Ability to effectively interpret blueprints-Ability to organize and prioritize work-Ability to produce quality productsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • West Fargo, North Dakota
        • Temp to Perm
        • $19.44 - $22.44 per hour
        • Various Shifts Available
        Spherion Staffing has 1st & 2nd shift Machinist positions available for a local industrial manufacturing company. This Machinist position will operate a variety of machine tools and equipment to accurately machine final product as well as assist in the development of new products and processes.Qualified applicants must have 2 year degree and at least 4 years' of machining experience.1st shift 6 am - 4:30 pm Mon-Thur2nd Shift 4:15 pm-2:45 am Mon-ThurPay: $19.44/hour plus $3 shift differentialResponsibilities:- Use precision measuring devices to effectively machine parts- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications - Ability to set-up, adjust and perform operations with close tolerance and finish requirements on standardized parts- Conduct pre and post inspection on all machined parts- Plan and make difficult or new setups with necessary equipment - Assist in the development of work instructions- Perform preventive maintenance as requiredResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Two-year tech school degree or equivalent experience preferred-Minimum four years job related experience in a manufacturing environment-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environmentEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has 1st & 2nd shift Machinist positions available for a local industrial manufacturing company. This Machinist position will operate a variety of machine tools and equipment to accurately machine final product as well as assist in the development of new products and processes.Qualified applicants must have 2 year degree and at least 4 years' of machining experience.1st shift 6 am - 4:30 pm Mon-Thur2nd Shift 4:15 pm-2:45 am Mon-ThurPay: $19.44/hour plus $3 shift differentialResponsibilities:- Use precision measuring devices to effectively machine parts- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications - Ability to set-up, adjust and perform operations with close tolerance and finish requirements on standardized parts- Conduct pre and post inspection on all machined parts- Plan and make difficult or new setups with necessary equipment - Assist in the development of work instructions- Perform preventive maintenance as requiredResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Two-year tech school degree or equivalent experience preferred-Minimum four years job related experience in a manufacturing environment-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environmentEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

      Thank you for subscribing to your personalized job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.