You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    9 jobs found for 1st shift in Dodge Center, Minnesota

    Filter2
    Clear all
      • Dodge Center, Minnesota
      • Permanent
      • $15.50 - $17.00 per hour
      • 6:00 AM - 4:30 PM
      Performs a wide variety of tasks in support of manufacturing/production of concrete mixer and refuse truck parts and bodies. Responsible for preparing parts and equipment for paint including removing previously applied paint, cleaning, and degreasing, smoothing surfaces, and protecting unpainted surfaces by masking. These duties require strong attention to detail to adequately prepare the trucks for the next stage in the high-quality manufacturing process.Responsibilities:Wash, clean, and wipe down vehicles to be painted Remove and replace all components as required for painting and sanding Mask, paper, or grease components when appropriate Operate necessary equipment (dual action hand sander, electric lifts, etc.) Use basic hand tools and other small power tools associated with equipment and prep work prior to painting operations Perform minor bodywork and maintain condition of vehicle or component through the entire paint process Train and work in various areas of production in response to production demands Identification, safe handling, and appropriate disposal of materials Follow verbal and written work instructions Attention to detail necessary to adhere to quality standards Maintain a safe and clean work environment by complying with procedures, rules, and regulations Regular attendance required All other duties and responsibilities that are assigned Per 40 CFR 265.16(d)(1-3) - This position requires initial training within 6 months and annual thereafter as a hazardous waste handler as required by the EPA RCRA hazardous waste rules. Responsible for and trained to understand waste hazards, storage time limits, satellite accumulation, marking, labeling, weekly inspections, aisle space, storage, manifest shipping, use and location of emergency equipment, response to spills and fires, evacuation routes, etc.Working hours: 6:00 AM - 4:30 PMSkills:One (1) year of applicable position experienceEnjoys working in a team environmentExperience using hand toolsEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDFollows all safety and compliance regulations APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Performs a wide variety of tasks in support of manufacturing/production of concrete mixer and refuse truck parts and bodies. Responsible for preparing parts and equipment for paint including removing previously applied paint, cleaning, and degreasing, smoothing surfaces, and protecting unpainted surfaces by masking. These duties require strong attention to detail to adequately prepare the trucks for the next stage in the high-quality manufacturing process.Responsibilities:Wash, clean, and wipe down vehicles to be painted Remove and replace all components as required for painting and sanding Mask, paper, or grease components when appropriate Operate necessary equipment (dual action hand sander, electric lifts, etc.) Use basic hand tools and other small power tools associated with equipment and prep work prior to painting operations Perform minor bodywork and maintain condition of vehicle or component through the entire paint process Train and work in various areas of production in response to production demands Identification, safe handling, and appropriate disposal of materials Follow verbal and written work instructions Attention to detail necessary to adhere to quality standards Maintain a safe and clean work environment by complying with procedures, rules, and regulations Regular attendance required All other duties and responsibilities that are assigned Per 40 CFR 265.16(d)(1-3) - This position requires initial training within 6 months and annual thereafter as a hazardous waste handler as required by the EPA RCRA hazardous waste rules. Responsible for and trained to understand waste hazards, storage time limits, satellite accumulation, marking, labeling, weekly inspections, aisle space, storage, manifest shipping, use and location of emergency equipment, response to spills and fires, evacuation routes, etc.Working hours: 6:00 AM - 4:30 PMSkills:One (1) year of applicable position experienceEnjoys working in a team environmentExperience using hand toolsEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDFollows all safety and compliance regulations APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Dodge Center, Minnesota
      • Permanent
      • $17.50 - $19.00 per hour
      • 6:00 AM - 4:30 PM
      JOB SUMMARY: Responsible for the application of paint and other coatings using electrostatic / air assist paint guns and other automotive type paint application devices on Company products including military spec paint. This position has the knowledge and skills to perform in any and each area of the paint process.Responsibilities:These duties are not meant to be all-inclusive and other duties may be assigned.Prime, paint, and touchup vehicles with power spray equipment and brushes. Flush tanks, hoses, and guns prior to color changeovers. Mix all types of paints for proper color, formula, conditions, viscosity, and consistency. Perform titrations and mix or adjust chemicals as neededMaintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards. Demonstrate best practices to follow all safe procedures in assembling and testing of all models/products in assigned job functionUpkeep of work area and equipment which may include preventative maintenance tasks. Inspect product before, during, after paint process to ensure specifications are being met.Sand, wash, and condition parts as necessary. Light bodywork may be required.Inspection of completed parts for quality, validate components meetTeam member has the knowledge and skills to perform in every area of the paint process. Assist training new team members on processes and equipment functionsAny other tasks assigned by Supervisor to meet company needs Ability to start training to perform touch-up.Disassemble, clean, repair, adjust and reassemble painting equipment, such as pumps, paint heaters, tanks, spray guns, etc. for proper operation (Repairs are only required in Dodge Center)Apply decals, stencils, and rust-proofing as required (Dodge Center only)Working hours: 6:00 AM - 4:30 PMSkills:Automotive paint experienceManufacturing parts painting experienceWillingness to train in multiple areas to obtain a Painter ll levelEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDSix (6) months of industrial painting experience or completion of internal paint training programMust be able to read checklists, paint codes, Safety logs, JSA's, SWI's etc.Able to proficiently paint in single assigned area Must be able to perform mill checks and readings and help with paint prep (Riceville only)Able to perform fine line painting technique (Riceville only) APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      JOB SUMMARY: Responsible for the application of paint and other coatings using electrostatic / air assist paint guns and other automotive type paint application devices on Company products including military spec paint. This position has the knowledge and skills to perform in any and each area of the paint process.Responsibilities:These duties are not meant to be all-inclusive and other duties may be assigned.Prime, paint, and touchup vehicles with power spray equipment and brushes. Flush tanks, hoses, and guns prior to color changeovers. Mix all types of paints for proper color, formula, conditions, viscosity, and consistency. Perform titrations and mix or adjust chemicals as neededMaintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards. Demonstrate best practices to follow all safe procedures in assembling and testing of all models/products in assigned job functionUpkeep of work area and equipment which may include preventative maintenance tasks. Inspect product before, during, after paint process to ensure specifications are being met.Sand, wash, and condition parts as necessary. Light bodywork may be required.Inspection of completed parts for quality, validate components meetTeam member has the knowledge and skills to perform in every area of the paint process. Assist training new team members on processes and equipment functionsAny other tasks assigned by Supervisor to meet company needs Ability to start training to perform touch-up.Disassemble, clean, repair, adjust and reassemble painting equipment, such as pumps, paint heaters, tanks, spray guns, etc. for proper operation (Repairs are only required in Dodge Center)Apply decals, stencils, and rust-proofing as required (Dodge Center only)Working hours: 6:00 AM - 4:30 PMSkills:Automotive paint experienceManufacturing parts painting experienceWillingness to train in multiple areas to obtain a Painter ll levelEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDSix (6) months of industrial painting experience or completion of internal paint training programMust be able to read checklists, paint codes, Safety logs, JSA's, SWI's etc.Able to proficiently paint in single assigned area Must be able to perform mill checks and readings and help with paint prep (Riceville only)Able to perform fine line painting technique (Riceville only) APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Dodge Center, Minnesota
      • Permanent
      • $15.50 - $17.00 per hour
      • 6:00 AM - 4:30 PM
      The Materials Handler is responsible for supporting internal and external customers through accurate receiving, stocking, delivery, and shipment of materials. In addition, the Materials Handler responsible for operating all material support equipment and performing all material support functions (i.e. receiving, running lines, and shipping) in assigned Operations facility.Responsibilities:These duties are not meant to be all-inclusive and other duties may be assigned.Efficiently locate & pull materials/supplies as listed on production/sales order and stock assigned production areas to maintain inventory levels for production; ability to accurately verify parts & quantities and complete BOLs to receive and/or ship material.Licensed and can operate all material handling equipment (i.e. Stand-up, Sit-down, Combi, Lancer, Tugger) at assigned Operations facility. Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards; use best practices to follow all safe procedures in operation of various material support equipment in assigned Operations facility.Maintain a safe and clean work environment by complying with procedures, rules, and proper 6S standards; follow all safe procedures and practices in assembling and testing of all models in your job function.Working hours: 6:00 AM - 4:30 PMSkills:Six (6) months of applicable position experienceExperience using warehouse technology or electronicsExperience with ship confirmingEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDPrevious experience directly working with material handling equipment (forklift, tugger, etc.), inventory management in a warehouse or manufacturing environment Ability to become forklift certified to operate a forklift/tugger to receive and deliver parts safely and efficiently Basic computer skillsAbility to multi-task and adapt to an ever-changing environment and processes APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Materials Handler is responsible for supporting internal and external customers through accurate receiving, stocking, delivery, and shipment of materials. In addition, the Materials Handler responsible for operating all material support equipment and performing all material support functions (i.e. receiving, running lines, and shipping) in assigned Operations facility.Responsibilities:These duties are not meant to be all-inclusive and other duties may be assigned.Efficiently locate & pull materials/supplies as listed on production/sales order and stock assigned production areas to maintain inventory levels for production; ability to accurately verify parts & quantities and complete BOLs to receive and/or ship material.Licensed and can operate all material handling equipment (i.e. Stand-up, Sit-down, Combi, Lancer, Tugger) at assigned Operations facility. Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards; use best practices to follow all safe procedures in operation of various material support equipment in assigned Operations facility.Maintain a safe and clean work environment by complying with procedures, rules, and proper 6S standards; follow all safe procedures and practices in assembling and testing of all models in your job function.Working hours: 6:00 AM - 4:30 PMSkills:Six (6) months of applicable position experienceExperience using warehouse technology or electronicsExperience with ship confirmingEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or GEDPrevious experience directly working with material handling equipment (forklift, tugger, etc.), inventory management in a warehouse or manufacturing environment Ability to become forklift certified to operate a forklift/tugger to receive and deliver parts safely and efficiently Basic computer skillsAbility to multi-task and adapt to an ever-changing environment and processes APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Blooming Prairie, Minnesota
      • Permanent
      • $60,000 - $65,000 per year
      • 7:00 AM - 4:00 PM
      The Tooling Engineer is responsible for the research, design, development, build, validation, and implementation of tooling for new and existing products, manufacturing, and production processes. This position reports to the Plant Manager. A typical day for a Tooling Engineer will consist of a daily conference call about new and existing sales quotations. During this time ECO?s will be reviewed and action plans completed. Afterwards, a discussion with the tooling team will be conducted for evaluation of work duties and deployment of your team. The tooling team keeps our lines producing quality parts efficiently and fast. Your skills with CAD and Solid Works will allow you to draw up plans and solicit quotations for new or improved tooling concepts. Every day provides for a new challenge. Longer term projects will include organization, validation, and improvement to the tooling warehouse. A comprehensive tooling strategy should develop by the end of your first year. This position will be an excellent opportunity for someone wanting challenge and growth with a stellar local company.Responsibilities:Support open cast molding process by assisting in the design, fabrication, validation and repair and maintenance of tooling through the coordination of any outside vendors or internal resources.Develop and manage the production tooling standards as needed.Develop and rate tooling suppliers for quality, delivery, competitive price, and location.Develop preventative maintenance programs, advising on spare parts inventory, and coordinating the repair and servicing of tooling.Active member of the Engineering Team (cross functional group that addresses any design, quality or manufacturing concerns/needs before production starts).Ensure necessary documentation is updated for ongoing engineering changes related to tooling.Manage continuous improvement of existing molding programs to increase profitability, reduce scrap, reduce waste, and downtime reduction.Work with internal and external resources to resolve product or production issues.Lead or assist in corrective or preventive action root cause analysis, implementation, and verification.Manage a dynamic 3-5 person team.Able to work independently and handle multiple priorities.Accepts other duties and assumes other responsibilities as assigned or as need becomes apparent.Working hours: 7:00 AM - 4:00 PMSkills:-Ability to conduct in-dept research and present specific reasoning of recommendations.-Ability to develop project plans, coordinate projects, communicate changes and progress and complete projects on time and on budget.-Mechanically inclined.-Experience in open cast urethane process is preferred.-Good working knowledge of tool room equipment processes, tool design, CAD and SolidWorks?, geometric dimensioning and tolerancing.-Solid communication and organizational skills and ability to work with others to get resultsEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors Degree in Engineering or other Technical Degree, and three years? experience, or equivalent experience, and skill set. Extensive computer skills, including Microsoft Office products.Solid technical, analytical, systematic, and detail-oriented thinking skills. *DIRECT HIRE POSITION!* Benefits Include: Health Insurance, Dental, Vision, PTO, 401K, and more.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Tooling Engineer is responsible for the research, design, development, build, validation, and implementation of tooling for new and existing products, manufacturing, and production processes. This position reports to the Plant Manager. A typical day for a Tooling Engineer will consist of a daily conference call about new and existing sales quotations. During this time ECO?s will be reviewed and action plans completed. Afterwards, a discussion with the tooling team will be conducted for evaluation of work duties and deployment of your team. The tooling team keeps our lines producing quality parts efficiently and fast. Your skills with CAD and Solid Works will allow you to draw up plans and solicit quotations for new or improved tooling concepts. Every day provides for a new challenge. Longer term projects will include organization, validation, and improvement to the tooling warehouse. A comprehensive tooling strategy should develop by the end of your first year. This position will be an excellent opportunity for someone wanting challenge and growth with a stellar local company.Responsibilities:Support open cast molding process by assisting in the design, fabrication, validation and repair and maintenance of tooling through the coordination of any outside vendors or internal resources.Develop and manage the production tooling standards as needed.Develop and rate tooling suppliers for quality, delivery, competitive price, and location.Develop preventative maintenance programs, advising on spare parts inventory, and coordinating the repair and servicing of tooling.Active member of the Engineering Team (cross functional group that addresses any design, quality or manufacturing concerns/needs before production starts).Ensure necessary documentation is updated for ongoing engineering changes related to tooling.Manage continuous improvement of existing molding programs to increase profitability, reduce scrap, reduce waste, and downtime reduction.Work with internal and external resources to resolve product or production issues.Lead or assist in corrective or preventive action root cause analysis, implementation, and verification.Manage a dynamic 3-5 person team.Able to work independently and handle multiple priorities.Accepts other duties and assumes other responsibilities as assigned or as need becomes apparent.Working hours: 7:00 AM - 4:00 PMSkills:-Ability to conduct in-dept research and present specific reasoning of recommendations.-Ability to develop project plans, coordinate projects, communicate changes and progress and complete projects on time and on budget.-Mechanically inclined.-Experience in open cast urethane process is preferred.-Good working knowledge of tool room equipment processes, tool design, CAD and SolidWorks?, geometric dimensioning and tolerancing.-Solid communication and organizational skills and ability to work with others to get resultsEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors Degree in Engineering or other Technical Degree, and three years? experience, or equivalent experience, and skill set. Extensive computer skills, including Microsoft Office products.Solid technical, analytical, systematic, and detail-oriented thinking skills. *DIRECT HIRE POSITION!* Benefits Include: Health Insurance, Dental, Vision, PTO, 401K, and more.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $16.50 per hour
      • 6:00 AM - 4:30 PM
      Performs assembly of mechanical and electromechanical component parts and or/upholstered parts.ASSEMBLER HOURS ARE MONDAY THROUGH THURSDAY; 6 AM UNTIL 4:30 PM. OVERTIME IS DONE ON FRIDAYS.Responsibilities:-Assembles various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.-Analyzes rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.-Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.-Maintains a safe and clean working environment.-Perform other duties as assigned.Working hours: 6:00 AM - 4:30 PMSkills:-Mechanical aptitude-Understanding of safetyEducation:High SchoolExperience:0-1 yearsQualifications:-High School Diploma or equivalent-Previous experience in manufacturing environment -Ability to read blueprints-Experience with hand tools Apply Today! Urgently hiring multiple candidates.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Performs assembly of mechanical and electromechanical component parts and or/upholstered parts.ASSEMBLER HOURS ARE MONDAY THROUGH THURSDAY; 6 AM UNTIL 4:30 PM. OVERTIME IS DONE ON FRIDAYS.Responsibilities:-Assembles various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.-Analyzes rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.-Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.-Maintains a safe and clean working environment.-Perform other duties as assigned.Working hours: 6:00 AM - 4:30 PMSkills:-Mechanical aptitude-Understanding of safetyEducation:High SchoolExperience:0-1 yearsQualifications:-High School Diploma or equivalent-Previous experience in manufacturing environment -Ability to read blueprints-Experience with hand tools Apply Today! Urgently hiring multiple candidates.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.50 - $40.50 per hour
      • 7:00 AM - 3:00 PM
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! JOBS ARE DISAPPEARING FAST.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! JOBS ARE DISAPPEARING FAST.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $22.50 - $26.50 per hour
      • 7:00 AM - 3:00 PM
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years??? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. APPLY & SHOW US WHAT YOUR MADE OF!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years??? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. APPLY & SHOW US WHAT YOUR MADE OF!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $18.00 - $19.50 per hour
      • 6:40 AM - 3:00 PM
      Follows all standard safety procedures as outlined and stated in the Awair Policy and uses all approved safety devices and equipment at all times.Packs parts on extrusion lines, may be required to package multiple lines.Responsible for all aspects of quality checking and recording on the lines being packaged. Also performs quality doublechecks for other lines.Responsibilities:Notifies Team Lead/Operator of quality issues or profile adjustments needed.Reads and understands blue prints and job package.Reads counters, changes lengths and maintains records of production.Ensures all tools are accounted for and put away.Cuts boxes, does packaging end of line tool checks and other packaging aspects as directed by the Team Lead.Performs Total Preventative Maintenance as directed by Team LeadWillingly works in other departments as directed.Able to work in a team environment to the cell aspects.Willingly takes direction from the Team Lead.Maintains required material levels.Follows standard work where ever applicable.May be required to perform other duties as needed.Working hours: 6:40 AM - 3:00 PMSkills:Standing, bending, lifting, twisting, and walking on concrete floor.Must be able to lift up to 50 lbs.Read and interpret blueprint and verify dimensions with gauges, which include, optical comparator calipers, push tester, etc.Be able to read 1/64?? and digital ruler.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to work in a cooperative manner with others APPLY TODAY!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Follows all standard safety procedures as outlined and stated in the Awair Policy and uses all approved safety devices and equipment at all times.Packs parts on extrusion lines, may be required to package multiple lines.Responsible for all aspects of quality checking and recording on the lines being packaged. Also performs quality doublechecks for other lines.Responsibilities:Notifies Team Lead/Operator of quality issues or profile adjustments needed.Reads and understands blue prints and job package.Reads counters, changes lengths and maintains records of production.Ensures all tools are accounted for and put away.Cuts boxes, does packaging end of line tool checks and other packaging aspects as directed by the Team Lead.Performs Total Preventative Maintenance as directed by Team LeadWillingly works in other departments as directed.Able to work in a team environment to the cell aspects.Willingly takes direction from the Team Lead.Maintains required material levels.Follows standard work where ever applicable.May be required to perform other duties as needed.Working hours: 6:40 AM - 3:00 PMSkills:Standing, bending, lifting, twisting, and walking on concrete floor.Must be able to lift up to 50 lbs.Read and interpret blueprint and verify dimensions with gauges, which include, optical comparator calipers, push tester, etc.Be able to read 1/64?? and digital ruler.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to work in a cooperative manner with others APPLY TODAY!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.50 - $19.50 per hour
      • 7:00 AM - 3:00 PM
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    Explore over 9 jobs in Dodge Center

    It looks like you want to switch your language. This will reset your filters on your current job search.