You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    25 Permanent Manufacturing & Production jobs found in Minnesota

    Filter4
    Clear all
      • Detroit Lakes, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • Various Shifts Available
      Spherion Staffing is currently seeking 1st and 2nd shift Machine Operators in Detroit Lakes, MN. Ideal candidates will have machine operator experience in a manufacturing environment. These are direct hire positions with growing company in Detroit Lakes.Responsibilities:- Operate press brake machine to bend parts per specified order- Use measuring tools such as caliper, tape measure, protractor, scales- Consistently lift parts from waist to chest level varying in weight- Ability to recognize tooling changes and different setups needed to fulfill requirements of job - Ability to work independently and as a team to get job done- Read and apply print reading to customer specificationsWorking hours: Various Shifts AvailableSkills:- Experience reading blue prints and schematics- Task-focusedEducation:High SchoolExperience:0-1 yearsQualifications:- Ability to stand for long periods of time- Ability to complete repetitive tasksSchedule:1st shift 6 am - 2:15 pm Mon - Fri2nd shift 2:15 pm - 12:30 am Mon - Thurs To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is currently seeking 1st and 2nd shift Machine Operators in Detroit Lakes, MN. Ideal candidates will have machine operator experience in a manufacturing environment. These are direct hire positions with growing company in Detroit Lakes.Responsibilities:- Operate press brake machine to bend parts per specified order- Use measuring tools such as caliper, tape measure, protractor, scales- Consistently lift parts from waist to chest level varying in weight- Ability to recognize tooling changes and different setups needed to fulfill requirements of job - Ability to work independently and as a team to get job done- Read and apply print reading to customer specificationsWorking hours: Various Shifts AvailableSkills:- Experience reading blue prints and schematics- Task-focusedEducation:High SchoolExperience:0-1 yearsQualifications:- Ability to stand for long periods of time- Ability to complete repetitive tasksSchedule:1st shift 6 am - 2:15 pm Mon - Fri2nd shift 2:15 pm - 12:30 am Mon - Thurs To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Detroit Lakes, Minnesota
      • Permanent
      • $20.00 - $25.00 per hour
      • Various Shifts Available
      Spherion Staffing is currently seeking welders in Detroit Lakes. Ideal candidates will have MIG welding experience and be able to read and apply print reading to customer specifications. This is a direct hire opportunity with a growing manufacturing company.Responsibilities:- Weld parts to specification using torch / plasma cutting- Primarily MIG welding with an occasional need to do TIG weld- Weld steel and stainless components according to blueprints and customer orders- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Ability to read blue prints- Team player- MIG welding experienceEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to consistently lift varying weights to shoulder level and higher- Ability to work on repetitive tasks for long periods of timeSchedule: 1st shift: 6a - 2:15p Mon - Fri2nd shift: 2:15 pm - 12:30 am Mon - Thurs To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is currently seeking welders in Detroit Lakes. Ideal candidates will have MIG welding experience and be able to read and apply print reading to customer specifications. This is a direct hire opportunity with a growing manufacturing company.Responsibilities:- Weld parts to specification using torch / plasma cutting- Primarily MIG welding with an occasional need to do TIG weld- Weld steel and stainless components according to blueprints and customer orders- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Ability to read blue prints- Team player- MIG welding experienceEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to consistently lift varying weights to shoulder level and higher- Ability to work on repetitive tasks for long periods of timeSchedule: 1st shift: 6a - 2:15p Mon - Fri2nd shift: 2:15 pm - 12:30 am Mon - Thurs To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • St Peter, Minnesota
      • Permanent
      • $17.50 - $19.75 per hour
      • 6:00 AM - 4:30 PM
      DIRECT HIRE ALERT!!! We have exciting news! Spherion Staffing has partnered with leading boat manufacturer, Alumacraft in St. Peter, and we are seeking dedicated Assemblers to join the Alumacraft family! These positions are long-term, DIRECT HIRE WITH GREAT PAY AND FULL BENEFITS. Hours for 1st shift are Monday - Thursday from 6:00 a.m. - 4:30 p.m. with OT on Fridays (as needed). Pay $17.50 - $19.75/hour plus benefitsResponsibilities:Installing interior boat components such as brackets etc., carpeting, gluing, sawing, filing, glue gun usage, stapling, vacuuming, and foaming gun use.Select and prepare components for boats, inspect quality of material prior to and following installation using tape measure, jigs, and gauges to insure proper fit and alignment of interior boat components.Inserting die corresponding to size of rivet head in hammer.Dressing triggers to pound and shape head on rivet shank.Drilling holes using air drill.Helps to physically move boat from station to station.May clean or align holes and make adjustments to fit parts.Able to work different stations to meet production needs.Working hours: 6:00 AM - 4:30 PMSkills:Ability to stand and work in various positions for several hours on concreteAbility to see and read complicated instructionsMust be accurate and detail orientated.Education:No Degree RequiredExperience:0-1 yearsQualifications:Strong attendance recordAbility to manually move product and materials up to 50 lbs. through regular physical exertion, including but not limited to climbing, lifting, carrying, pushing pulling and bending. DON'T WAIT, APPLY TODAY! Call Jennifer to schedule an immediate phone interview: 507-934-8259!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      DIRECT HIRE ALERT!!! We have exciting news! Spherion Staffing has partnered with leading boat manufacturer, Alumacraft in St. Peter, and we are seeking dedicated Assemblers to join the Alumacraft family! These positions are long-term, DIRECT HIRE WITH GREAT PAY AND FULL BENEFITS. Hours for 1st shift are Monday - Thursday from 6:00 a.m. - 4:30 p.m. with OT on Fridays (as needed). Pay $17.50 - $19.75/hour plus benefitsResponsibilities:Installing interior boat components such as brackets etc., carpeting, gluing, sawing, filing, glue gun usage, stapling, vacuuming, and foaming gun use.Select and prepare components for boats, inspect quality of material prior to and following installation using tape measure, jigs, and gauges to insure proper fit and alignment of interior boat components.Inserting die corresponding to size of rivet head in hammer.Dressing triggers to pound and shape head on rivet shank.Drilling holes using air drill.Helps to physically move boat from station to station.May clean or align holes and make adjustments to fit parts.Able to work different stations to meet production needs.Working hours: 6:00 AM - 4:30 PMSkills:Ability to stand and work in various positions for several hours on concreteAbility to see and read complicated instructionsMust be accurate and detail orientated.Education:No Degree RequiredExperience:0-1 yearsQualifications:Strong attendance recordAbility to manually move product and materials up to 50 lbs. through regular physical exertion, including but not limited to climbing, lifting, carrying, pushing pulling and bending. DON'T WAIT, APPLY TODAY! Call Jennifer to schedule an immediate phone interview: 507-934-8259!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 5:00 AM - 3:15 PM
      This person will engage in a variety of tasks in the Assembly Cell.Responsibilities:Some responsibilities will include; TIG welding and gas soldering. Will perform quality check of parts and adjust as required.Working hours: 5:00 AM - 3:15 PMSkills:--Required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.--Must be able to work in repetitive motion with hands, wrist, shoulders, etc. --Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. --Individuals will work near moving mechanical parts of machinery and electrically activated devices. --Must be able to work responsibly with limited supervision--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process--Overtime is typically voluntary. However, during busy production periods overtime will be required--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High-School Diploma or equivalent Must have some welding experience. Must be detail oriented, self-motivated, and able to keep area clean and organized. Must be able to retain training information. Requires a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This person will engage in a variety of tasks in the Assembly Cell.Responsibilities:Some responsibilities will include; TIG welding and gas soldering. Will perform quality check of parts and adjust as required.Working hours: 5:00 AM - 3:15 PMSkills:--Required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.--Must be able to work in repetitive motion with hands, wrist, shoulders, etc. --Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. --Individuals will work near moving mechanical parts of machinery and electrically activated devices. --Must be able to work responsibly with limited supervision--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process--Overtime is typically voluntary. However, during busy production periods overtime will be required--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High-School Diploma or equivalent Must have some welding experience. Must be detail oriented, self-motivated, and able to keep area clean and organized. Must be able to retain training information. Requires a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 6:00 AM - 2:15 PM
      This person will be sanding parts in the Paint/Finish Department.Responsibilities:Sanding Parts.Working hours: 6:00 AM - 2:15 PMSkills:The ideal candidate will have the following:-The sander is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.-The sander must be able to work in repetitive motion with hands, wrist, shoulders, etc. -The sander must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus-Must be able to work responsibly with limited supervision-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process-Overtime is typically voluntary. However, during busy production periods overtime will be required-Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:-High school diploma or equivalent.-Requires passing a pre-employment screening, which includes a drug screen. This is a DIRECT HIRE (permanent) position with a 100% employee owned company that has been voted Best Place to Work many times! Great way to get your foot in the door for these BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This person will be sanding parts in the Paint/Finish Department.Responsibilities:Sanding Parts.Working hours: 6:00 AM - 2:15 PMSkills:The ideal candidate will have the following:-The sander is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.-The sander must be able to work in repetitive motion with hands, wrist, shoulders, etc. -The sander must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus-Must be able to work responsibly with limited supervision-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process-Overtime is typically voluntary. However, during busy production periods overtime will be required-Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:-High school diploma or equivalent.-Requires passing a pre-employment screening, which includes a drug screen. This is a DIRECT HIRE (permanent) position with a 100% employee owned company that has been voted Best Place to Work many times! Great way to get your foot in the door for these BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $17.00 - $21.00 per hour
      • 6:00 AM - 3:15 PM
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required. Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm. Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC). Maintain all lubricants and coolants on the machine that are used in daily operation. Keep work area clean. Punching, employing recognized tooling and procedures where tolerances are close. Assist lower-level operators to develop skills and to produce production parts to spec. Operates all common machine shop equipment and hand tools skillfully. Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill. Sets up machines for less skills machine operators. Produces precision items beyond the capabilities of production machine operators. Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Periodically may be off-site for installation of equipmentWorking hours: 6:00 AM - 3:15 PMSkills:- Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments- Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:1-4 yearsQualifications:Requires a high school diplomaRequires passing pre-employment screening, including a drug screen DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required. Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm. Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC). Maintain all lubricants and coolants on the machine that are used in daily operation. Keep work area clean. Punching, employing recognized tooling and procedures where tolerances are close. Assist lower-level operators to develop skills and to produce production parts to spec. Operates all common machine shop equipment and hand tools skillfully. Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill. Sets up machines for less skills machine operators. Produces precision items beyond the capabilities of production machine operators. Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Periodically may be off-site for installation of equipmentWorking hours: 6:00 AM - 3:15 PMSkills:- Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments- Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:1-4 yearsQualifications:Requires a high school diplomaRequires passing pre-employment screening, including a drug screen DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 6:00 AM - 2:15 PM
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Apply acquired trade skills such as electrical, mechanical and plumbing to complete assembly process.Follow ISO procedures.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to product?s shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Set-up and performs Assembly Department operations with minimum supervision.Familiar with mechanical and electromechanical components.Thorough understanding of part prints (tolerances, symbols, etc.).Perform checks for quality of parts and make adjustments as required.Perform other duties as assigned.Working hours: 6:00 AM - 2:15 PMSkills:--Familiar with mechanical and electromechanical components--Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes--Good motivation and communication skills--Problem solving skillsEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or equivalentEntry level or 1-2 years of assembly experience Manual dexterityAbility to work in a team settingA positive can-do attitudeRefuse to be satisfied with average performanceAble to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over headAble to lift up to 50 lbs DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Apply acquired trade skills such as electrical, mechanical and plumbing to complete assembly process.Follow ISO procedures.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to product?s shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Set-up and performs Assembly Department operations with minimum supervision.Familiar with mechanical and electromechanical components.Thorough understanding of part prints (tolerances, symbols, etc.).Perform checks for quality of parts and make adjustments as required.Perform other duties as assigned.Working hours: 6:00 AM - 2:15 PMSkills:--Familiar with mechanical and electromechanical components--Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes--Good motivation and communication skills--Problem solving skillsEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or equivalentEntry level or 1-2 years of assembly experience Manual dexterityAbility to work in a team settingA positive can-do attitudeRefuse to be satisfied with average performanceAble to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over headAble to lift up to 50 lbs DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $80,000 - $90,000 per year
      • 8:00 AM - 5:00 PM
      Operations ManagerWe are looking for an experienced Operations Manager to oversee our cabinet manufacturing with a focus on accuracy and meeting deadlines.This kind company has been offering high-quality, custom cabinetry to clients and builders throughout the Twin Cities and southern Minnesota for 46 years. Join this thriving, family-owned business as they continue to expand production capabilities.Responsibilities:Manage production schedule with shop SupervisorOversee production scheduleSetting and reaching production goalsForecasting using sales scheduleMaking sure final measures are completed in a timely mannerManage a team of 6-8 employeesEnsure training of new employeesHiring of subcontractors for installation/deliveryWork with AR on billings and collectionsOther duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:--We believe we accomplish more together than alone. We are looking for individuals who fit our Core Values:--Approachable and Resourceful--Driven--Work as a Team--Craftsmanship--Solution DrivenEducation:No Degree RequiredExperience:1-4 yearsQualifications:5+ years experience in Operations ManagementCarpentry experience preferredExcellent networking and relationship-building skillsTime management skillsGreat communication skills, verbal and written Direct Hire position! Day Shift, Monday thru Friday! BenefitsHealth insurance- company pays 100% of employee-only premium on lowest cost planPaid vacationPaid holidaysPaid sick leave401k and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Operations ManagerWe are looking for an experienced Operations Manager to oversee our cabinet manufacturing with a focus on accuracy and meeting deadlines.This kind company has been offering high-quality, custom cabinetry to clients and builders throughout the Twin Cities and southern Minnesota for 46 years. Join this thriving, family-owned business as they continue to expand production capabilities.Responsibilities:Manage production schedule with shop SupervisorOversee production scheduleSetting and reaching production goalsForecasting using sales scheduleMaking sure final measures are completed in a timely mannerManage a team of 6-8 employeesEnsure training of new employeesHiring of subcontractors for installation/deliveryWork with AR on billings and collectionsOther duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:--We believe we accomplish more together than alone. We are looking for individuals who fit our Core Values:--Approachable and Resourceful--Driven--Work as a Team--Craftsmanship--Solution DrivenEducation:No Degree RequiredExperience:1-4 yearsQualifications:5+ years experience in Operations ManagementCarpentry experience preferredExcellent networking and relationship-building skillsTime management skillsGreat communication skills, verbal and written Direct Hire position! Day Shift, Monday thru Friday! BenefitsHealth insurance- company pays 100% of employee-only premium on lowest cost planPaid vacationPaid holidaysPaid sick leave401k and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $23.50 - $25.00 per hour
      • 6:30 AM - 4:00 PM
      Machinist able to operate and maintain a manual Lathe Milling Machine.Responsibilities:Ability to operate and maintain a manual lathe & milling machineReviews drawings, instructions, blueprints or samples to ensure accurate production.Takes precise measurements for cutting or shaping.Can convert fractions to decimals and read caliper/micrometer calibration.Program CNC Mill with conversational programming and or G-code preferred but not requiredPerform production, adjusts feed and other settings as necessary.Checks output for quality assuranceIdentifies need for machine maintenanceMaintains a safe and clean workstation.Ability to accomplish related tasks as needed and in a timely manner.Working hours: 6:30 AM - 4:00 PMSkills:--Excellent coordination and mechanical skills--Attention to detail, accuracy, and safety--Solid written and verbal communication skills--Proficient in math--Basic computer skills--Ability to lift 50 pounds and perform repetitive tasks--Punctual--Self-motivated.Education:High SchoolExperience:1-4 yearsQualifications:High school or equivalent (Preferred)Machining: 2 years (Required)Drug free work: 2 years (Preferred)Blueprint reading: 2 years (Preferred)Conversational programming or G-Code: 2 years (Preferred) This is a Direct Hire position (NOT temp or temp-to-hire) that comes with a full Benefit Package for a local family owned company for generations! Benefits:Employee discountHealth insuranceHealth savings accountLife insurancePaid time offRetirement planVision insuranceSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Machinist able to operate and maintain a manual Lathe Milling Machine.Responsibilities:Ability to operate and maintain a manual lathe & milling machineReviews drawings, instructions, blueprints or samples to ensure accurate production.Takes precise measurements for cutting or shaping.Can convert fractions to decimals and read caliper/micrometer calibration.Program CNC Mill with conversational programming and or G-code preferred but not requiredPerform production, adjusts feed and other settings as necessary.Checks output for quality assuranceIdentifies need for machine maintenanceMaintains a safe and clean workstation.Ability to accomplish related tasks as needed and in a timely manner.Working hours: 6:30 AM - 4:00 PMSkills:--Excellent coordination and mechanical skills--Attention to detail, accuracy, and safety--Solid written and verbal communication skills--Proficient in math--Basic computer skills--Ability to lift 50 pounds and perform repetitive tasks--Punctual--Self-motivated.Education:High SchoolExperience:1-4 yearsQualifications:High school or equivalent (Preferred)Machining: 2 years (Required)Drug free work: 2 years (Preferred)Blueprint reading: 2 years (Preferred)Conversational programming or G-Code: 2 years (Preferred) This is a Direct Hire position (NOT temp or temp-to-hire) that comes with a full Benefit Package for a local family owned company for generations! Benefits:Employee discountHealth insuranceHealth savings accountLife insurancePaid time offRetirement planVision insuranceSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $29.00 per hour
      • 7:00 AM - 3:10 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 7:00 AM - 3:10 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs a
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 7:00 AM - 3:10 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs a
      • St Peter, Minnesota
      • Permanent
      • $18.00 per hour
      • 6:00 AM - 4:30 PM
      DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 6:00 a.m. - 4:30 p.m., OT on Fridays as neededPay: $18.00/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 6:00 AM - 4:30 PMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 6:00 a.m. - 4:30 p.m., OT on Fridays as neededPay: $18.00/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 6:00 AM - 4:30 PMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $29.00 per hour
      • 5:00 AM - 3:10 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 5:00 AM - 3:10 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs a
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 5:00 AM - 3:10 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs a
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 5:00 AM - 3:10 PM
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Apply acquired trade skills such as electrical, mechanical and plumbing to complete assembly process.Follow ISO procedures.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to product?s shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Set-up and performs Assembly Department operations with minimum supervision.Familiar with mechanical and electromechanical components.Thorough understanding of part prints (tolerances, symbols, etc.).Perform checks for quality of parts and make adjustments as required.Perform other duties as assigned.Working hours: 5:00 AM - 3:10 PMSkills:--Familiar with mechanical and electromechanical components--Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes--Good motivation and communication skills--Problem solving skillsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentEntry level or 1-2 years of assembly experience Manual dexterityAbility to work in a team settingA positive can-do attitudeRefuse to be satisfied with average performanceAble to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over headAble to lift up to 50 lbs DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Apply acquired trade skills such as electrical, mechanical and plumbing to complete assembly process.Follow ISO procedures.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to product?s shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Set-up and performs Assembly Department operations with minimum supervision.Familiar with mechanical and electromechanical components.Thorough understanding of part prints (tolerances, symbols, etc.).Perform checks for quality of parts and make adjustments as required.Perform other duties as assigned.Working hours: 5:00 AM - 3:10 PMSkills:--Familiar with mechanical and electromechanical components--Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes--Good motivation and communication skills--Problem solving skillsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentEntry level or 1-2 years of assembly experience Manual dexterityAbility to work in a team settingA positive can-do attitudeRefuse to be satisfied with average performanceAble to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over headAble to lift up to 50 lbs DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $70,000 - $90,000 per year
      • 5:00 AM - 4:00 PM
      Work for a leading manufacturer and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! This experienced Production Manager will lead and motivate a team of production team members to achieve a safe work environment and the efficient running of our operations. This role will execute upon the manufacturing plan by utilizing available resources, labor, materials, support, and capital to optimize production. In this position you would emphasize improved safety, higher quality, lower cost, and better delivery by developing improved product flow, production / inventory / capacity planning, process reliability, waste elimination, and individual / organizational development consistent with the strategic plan.Responsibilities:-Ensuring timely completion of work and advising the organization of departmental status including equipment problems, process problems, and employee performance issues-Managing labor resources to ensure that an appropriate quantity and skill level are available through selection, training, and personnel development-Supporting daily continuous process improvement and waste elimination to enhance our competitive edge through maintaining Gemba board metrics / Paretos and identifying and leading improvements in the areas of responsibility-Improving safety performance by maintaining safety system compliance and 5S realization-Leading team to comply with ISO certification requirements and guarantee quality system conformance-Driving machine reliability by ensuring the preventative maintenance system is executed and maintained-Improving inventory performance with best practices and implementing reliable inventory systems-Supporting development of annual budgets and executing plans to meet the productivity goal of the organization-Managing key projects to fulfill strategic objectives-Supporting product teams with improving products and processes to increase customer satisfaction and profitabilityWorking hours: 5:00 AM - 4:00 PMSkills:--Proven commitment to change and continuous improvement--Ability to communicate verbally and in written form--Analytical and problem-solving ability--Proven ability to motivate teams and manage conflict--Computer skills (business system, email, spreadsheet and word processing)--Experience with ERP systems and product flow--Ability to read and interpret prints, drawings, and layoutsEducation:BachelorsExperience:1-4 yearsQualifications:-Bachelor or Associate degree (bachelor???s preferred); equivalent leadership experience will be considered in lieu of degree-Three to five (3-5) years proven manufacturing experience-Three (3) years management or leadership experience-Experience in lean manufacturing environment Direct Hire position! Work for a leading manufacturer, and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! Benefit offerings include:-Paid Time Off-9 Paid Holidays-Generous Profit Sharing-Medical, Dental and Vision Insurance-Spending Accounts ??? HSA, FSA, DCFSA-Company Paid Short-term and Long-term Disability Insurance-401k Retirement Plan with Company Match-Company Paid Life Insurance-Supplemental Life Insurance-Tuition Assistance Program-Onsite Fitness Center-Employee Assistance Program-Short-term Incentive PlanSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and
      Work for a leading manufacturer and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! This experienced Production Manager will lead and motivate a team of production team members to achieve a safe work environment and the efficient running of our operations. This role will execute upon the manufacturing plan by utilizing available resources, labor, materials, support, and capital to optimize production. In this position you would emphasize improved safety, higher quality, lower cost, and better delivery by developing improved product flow, production / inventory / capacity planning, process reliability, waste elimination, and individual / organizational development consistent with the strategic plan.Responsibilities:-Ensuring timely completion of work and advising the organization of departmental status including equipment problems, process problems, and employee performance issues-Managing labor resources to ensure that an appropriate quantity and skill level are available through selection, training, and personnel development-Supporting daily continuous process improvement and waste elimination to enhance our competitive edge through maintaining Gemba board metrics / Paretos and identifying and leading improvements in the areas of responsibility-Improving safety performance by maintaining safety system compliance and 5S realization-Leading team to comply with ISO certification requirements and guarantee quality system conformance-Driving machine reliability by ensuring the preventative maintenance system is executed and maintained-Improving inventory performance with best practices and implementing reliable inventory systems-Supporting development of annual budgets and executing plans to meet the productivity goal of the organization-Managing key projects to fulfill strategic objectives-Supporting product teams with improving products and processes to increase customer satisfaction and profitabilityWorking hours: 5:00 AM - 4:00 PMSkills:--Proven commitment to change and continuous improvement--Ability to communicate verbally and in written form--Analytical and problem-solving ability--Proven ability to motivate teams and manage conflict--Computer skills (business system, email, spreadsheet and word processing)--Experience with ERP systems and product flow--Ability to read and interpret prints, drawings, and layoutsEducation:BachelorsExperience:1-4 yearsQualifications:-Bachelor or Associate degree (bachelor???s preferred); equivalent leadership experience will be considered in lieu of degree-Three to five (3-5) years proven manufacturing experience-Three (3) years management or leadership experience-Experience in lean manufacturing environment Direct Hire position! Work for a leading manufacturer, and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! Benefit offerings include:-Paid Time Off-9 Paid Holidays-Generous Profit Sharing-Medical, Dental and Vision Insurance-Spending Accounts ??? HSA, FSA, DCFSA-Company Paid Short-term and Long-term Disability Insurance-401k Retirement Plan with Company Match-Company Paid Life Insurance-Supplemental Life Insurance-Tuition Assistance Program-Onsite Fitness Center-Employee Assistance Program-Short-term Incentive PlanSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and
      • Albert Lea, Minnesota
      • Permanent
      • $20.00 - $26.00 per hour
      • 7:00 AM - 3:15 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and adjust as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Travel is required with this position and can be extensive at times. Which requires flexibility to working hours and days. Weekends may be required at times, however minimal.Responsibilities:?Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. ?Diagnoses cause of any malfunction and performs repair. ?Communicates with production department to obtain needed parts. ?Saves and tags parts of the job if under warranty or if requested by the customer. ?Examines equipment to determine if further safety or service work is required or recommended. ?Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. ?Documents all work performed and recommended on the repair. ?Cycle equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. ?Report machinery defects or malfunctions to supervisor and/or customer. ?Keeps shop area neat and clean. ?Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. ?Operates all tools and equipment in a safe manner. ?Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:--Degree, diploma, or certificate in Industrial Maintenance or five years of installation/maintenance experience. --Must have experience with electrical wiring and reading schematics for electrical, hydraulics, and pneumatics. Knowledge of programming is a plus. --Must have mechanical and equipment assembly aptitude. Welding and or machining experience is a plus.--Must have good communication skills, problem solving skills and be well organized. --Must be able to work a flexible schedule as this position includes travel to customers' facilities.Education:High SchoolExperience:1-4 yearsQualifications:?Must be able to travel up to 30% of the time. ?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Perform math skills of addition, subtraction, multiplication, and division.?Knowledge of decimals, fractions, and metric/English conversions.?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.?Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture. ?Using a specified training format, work closely in training new installation/service technicians.?Requires a pre-employment screening which includes, however not limited to, a drug screen and driving report. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP,
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and adjust as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Travel is required with this position and can be extensive at times. Which requires flexibility to working hours and days. Weekends may be required at times, however minimal.Responsibilities:?Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. ?Diagnoses cause of any malfunction and performs repair. ?Communicates with production department to obtain needed parts. ?Saves and tags parts of the job if under warranty or if requested by the customer. ?Examines equipment to determine if further safety or service work is required or recommended. ?Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. ?Documents all work performed and recommended on the repair. ?Cycle equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. ?Report machinery defects or malfunctions to supervisor and/or customer. ?Keeps shop area neat and clean. ?Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. ?Operates all tools and equipment in a safe manner. ?Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:--Degree, diploma, or certificate in Industrial Maintenance or five years of installation/maintenance experience. --Must have experience with electrical wiring and reading schematics for electrical, hydraulics, and pneumatics. Knowledge of programming is a plus. --Must have mechanical and equipment assembly aptitude. Welding and or machining experience is a plus.--Must have good communication skills, problem solving skills and be well organized. --Must be able to work a flexible schedule as this position includes travel to customers' facilities.Education:High SchoolExperience:1-4 yearsQualifications:?Must be able to travel up to 30% of the time. ?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Perform math skills of addition, subtraction, multiplication, and division.?Knowledge of decimals, fractions, and metric/English conversions.?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.?Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture. ?Using a specified training format, work closely in training new installation/service technicians.?Requires a pre-employment screening which includes, however not limited to, a drug screen and driving report. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP,
      • Hayward, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 5:00 AM - 2:15 PM
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 5:00 AM - 2:15 PMSkills:--Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments--Experience is a factory setting--Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRegularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.Requires passing pre-employment screening, including a drug screen DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 5:00 AM - 2:15 PMSkills:--Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments--Experience is a factory setting--Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRegularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.Requires passing pre-employment screening, including a drug screen DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 6:00 AM - 2:15 PM
      Masker in the Paint Line on 1st Shift.Responsibilities:Duties will include masking, taping and plugging parts prior to hanging on paint line. Duties will include sanding & buffing pieces prior to hanging on paint line. Sanding, grinding, and buffing.Working hours: 6:00 AM - 2:15 PMSkills:- Must have attention to detail.- High School Diploma or equivalent.- Paint Line, sanding, grinding, buffing or texturizing experience is a plus, but not required.- Good hand and eye coordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalent.Must be able to meet physical requirements.Must be flexible to work overtime hours as assigned.Passing pre-employment screenings including Drug Screen & Background. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Masker in the Paint Line on 1st Shift.Responsibilities:Duties will include masking, taping and plugging parts prior to hanging on paint line. Duties will include sanding & buffing pieces prior to hanging on paint line. Sanding, grinding, and buffing.Working hours: 6:00 AM - 2:15 PMSkills:- Must have attention to detail.- High School Diploma or equivalent.- Paint Line, sanding, grinding, buffing or texturizing experience is a plus, but not required.- Good hand and eye coordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalent.Must be able to meet physical requirements.Must be flexible to work overtime hours as assigned.Passing pre-employment screenings including Drug Screen & Background. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 5:00 AM - 3:10 PM
      This is an entry job or temporary position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 5:00 AM - 3:10 PMSkills:--Manual dexterity--Ability to work in a team setting--A positive can-do attitude--Motivation and communication skills--Problem solving skills and basic math skills--Refuse to be satisfied with average performance--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentRequires passing a pre-employment screening. Which includes a drug screenMust be 18 years of age or older. Fabrication background and or experience is preferred. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an entry job or temporary position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 5:00 AM - 3:10 PMSkills:--Manual dexterity--Ability to work in a team setting--A positive can-do attitude--Motivation and communication skills--Problem solving skills and basic math skills--Refuse to be satisfied with average performance--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentRequires passing a pre-employment screening. Which includes a drug screenMust be 18 years of age or older. Fabrication background and or experience is preferred. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $17.00 - $19.00 per hour
      • 5:00 AM - 2:15 PM
      This position will perform glass blast stainless steel components for final appearance after fabrication or welding and will assist in fabrication and assembly areas.Responsibilities:Operate spray booth for phosphatizing or passivating parts and weldments. Support blasting nozzle for up to ten hours per day in two-hour interval. Report shortages to be replenished to assembly supervisor when supplies run low. Monitor equipment for maintenance and perform preventative maintenance. Perform some preventative maintenance and other duties as assigned. Will assist with lining by using urethane equipment, de-molding, trimming and or grinding to blend seems or custom fit other parts. Will work with two-part urethane in an uncured state, silicone in an uncured state, primer in an uncured state, liquid mold release and xylene on a regular basis. Periodically may be off-site for installation of equipmentWorking hours: 5:00 AM - 2:15 PMSkills:- Spray booth experience.- Mechanical aptitude- De-molding, trimming and or grinding experienceEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Requires passing a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position will perform glass blast stainless steel components for final appearance after fabrication or welding and will assist in fabrication and assembly areas.Responsibilities:Operate spray booth for phosphatizing or passivating parts and weldments. Support blasting nozzle for up to ten hours per day in two-hour interval. Report shortages to be replenished to assembly supervisor when supplies run low. Monitor equipment for maintenance and perform preventative maintenance. Perform some preventative maintenance and other duties as assigned. Will assist with lining by using urethane equipment, de-molding, trimming and or grinding to blend seems or custom fit other parts. Will work with two-part urethane in an uncured state, silicone in an uncured state, primer in an uncured state, liquid mold release and xylene on a regular basis. Periodically may be off-site for installation of equipmentWorking hours: 5:00 AM - 2:15 PMSkills:- Spray booth experience.- Mechanical aptitude- De-molding, trimming and or grinding experienceEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Requires passing a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 - $17.00 per hour
      • 7:00 AM - 3:15 PM
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions.Responsibilities:The candidate will spray paint a wide variety of parts with lacquers, enamel, and undercoats to produce flat, gloss, semi-gloss, wrinkle and suede finishes.Working hours: 7:00 AM - 3:15 PMSkills:--A positive can-do attitude--Refuse to be satisfied with average performance--Able to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over head--Able to lift up to 50 lbsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentEntry level or 1-2 yrs of Assembly experience or 1-2 yrs powder and liquid industrial painting experience. Requires passing a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions.Responsibilities:The candidate will spray paint a wide variety of parts with lacquers, enamel, and undercoats to produce flat, gloss, semi-gloss, wrinkle and suede finishes.Working hours: 7:00 AM - 3:15 PMSkills:--A positive can-do attitude--Refuse to be satisfied with average performance--Able to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over head--Able to lift up to 50 lbsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentEntry level or 1-2 yrs of Assembly experience or 1-2 yrs powder and liquid industrial painting experience. Requires passing a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hayward, Minnesota
      • Permanent
      • $19.00 - $29.00 per hour
      • 6:00 AM - 3:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 3:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs a
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 3:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs a
      • Albert Lea, Minnesota
      • Permanent
      • $55,000 - $70,000 per year
      • 7:00 AM - 4:00 PM
      Develops systems and documentation for specific programs that ensure that products and services provided meet all contractual and program quality requirements.Responsibilities:Participates in the review of design, manufacturing, and test documentation to ensure that applicable program or contract quality requirements are met. Reviews the program quality performance to provide analysis and obtains corrective actions where necessary. Participates in the generation of program-specific quality and test philosophies to ensure compliance with company and customer requirements. Participates in the review of customer or contractual documentation (including proposals) to identify and ensure fulfillment of requirements. Provides interface and support to customer quality concerns to facilitate responsiveness to customers. Establishes and maintains the program quality system plan and documentation to ensure compliance with program requirements. Provides technical and advisory support to the prototype area to ensure the development of products in a manner that produces a quality system and documentation which will provide adherence to customer requirements. Dispositions discrepant material in a manner that ensures product quality and adherence to program requirements. Performs program-specific tasks as required (e.g., customer-required First Article Inspection, PPAP, APQP, PFMEA, SPC, Qualification Test Failure Analysis, etc.) to ensure compliance to individual program requirements. Devises, establishes, and maintains a reporting system for program quality to provide visibility internally and for the customer.Working hours: 7:00 AM - 4:00 PMSkills:--Effective negotiator with track record of accomplishment--Understanding of company/manufacturing big picture and objectives--Computer skills and experience (Microsoft Office Suite, Inspection Expert, Minitab, PiWeb, etc.)--Excellent communication skills (verbal, written and electronic)--Ability to work in a team setting--Attention to detail, well organized and self-motivatedEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors degree in mechanical or electrical engineering or related subject is desired. Associate Degree with three years of quality experience in a manufacturing setting is acceptableWorking knowledge of GD&TLean Background a plusRequires passing a pre-employment screening DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Develops systems and documentation for specific programs that ensure that products and services provided meet all contractual and program quality requirements.Responsibilities:Participates in the review of design, manufacturing, and test documentation to ensure that applicable program or contract quality requirements are met. Reviews the program quality performance to provide analysis and obtains corrective actions where necessary. Participates in the generation of program-specific quality and test philosophies to ensure compliance with company and customer requirements. Participates in the review of customer or contractual documentation (including proposals) to identify and ensure fulfillment of requirements. Provides interface and support to customer quality concerns to facilitate responsiveness to customers. Establishes and maintains the program quality system plan and documentation to ensure compliance with program requirements. Provides technical and advisory support to the prototype area to ensure the development of products in a manner that produces a quality system and documentation which will provide adherence to customer requirements. Dispositions discrepant material in a manner that ensures product quality and adherence to program requirements. Performs program-specific tasks as required (e.g., customer-required First Article Inspection, PPAP, APQP, PFMEA, SPC, Qualification Test Failure Analysis, etc.) to ensure compliance to individual program requirements. Devises, establishes, and maintains a reporting system for program quality to provide visibility internally and for the customer.Working hours: 7:00 AM - 4:00 PMSkills:--Effective negotiator with track record of accomplishment--Understanding of company/manufacturing big picture and objectives--Computer skills and experience (Microsoft Office Suite, Inspection Expert, Minitab, PiWeb, etc.)--Excellent communication skills (verbal, written and electronic)--Ability to work in a team setting--Attention to detail, well organized and self-motivatedEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors degree in mechanical or electrical engineering or related subject is desired. Associate Degree with three years of quality experience in a manufacturing setting is acceptableWorking knowledge of GD&TLean Background a plusRequires passing a pre-employment screening DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $17.00 - $19.00 per hour
      • 6:45 AM - 3:00 PM
      Coolant Technician for CNC Machines - 1st ShiftResponsibilities:Will be responsible for monitoring, changing, refilling, recycling of CNC machine coolants and chip clearing in a safe manner. Clear chips from CNC machines to avoid build-up edge and ensure sufficient chip clearing for machining process. Ensure chip system is performing effectively, in discharging dry coolant-free chips per recycling regulations. Ensure chips are disposed in proper recycling area. CNC Coolant Technician will monitor, dispense properly, and/or refill machine station coolants applicable to the machining processes. Apply coolant application by coolant type, maximum coolant flow rate, type of material machined, chip geometry, chip volume and coolant delivery to the machining cutting zone. Clean up coolant leaks per chemical safety protocol and set up proper signage after cleaning to avoid injuries.Working hours: 6:45 AM - 3:00 PMSkills:--Requires a minimum of two years working in a manufacturing environment.--Individual will be exposed to coolant/lubricant chemicals and airborne particles.--Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.--Individuals will work near moving mechanical parts of machinery and electrically activated devices.Education:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or equivalent. Must be 18 years of age or older. Requires a minimum of two years working in a manufacturing environment Requires passing a pre-employment screening, including a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Coolant Technician for CNC Machines - 1st ShiftResponsibilities:Will be responsible for monitoring, changing, refilling, recycling of CNC machine coolants and chip clearing in a safe manner. Clear chips from CNC machines to avoid build-up edge and ensure sufficient chip clearing for machining process. Ensure chip system is performing effectively, in discharging dry coolant-free chips per recycling regulations. Ensure chips are disposed in proper recycling area. CNC Coolant Technician will monitor, dispense properly, and/or refill machine station coolants applicable to the machining processes. Apply coolant application by coolant type, maximum coolant flow rate, type of material machined, chip geometry, chip volume and coolant delivery to the machining cutting zone. Clean up coolant leaks per chemical safety protocol and set up proper signage after cleaning to avoid injuries.Working hours: 6:45 AM - 3:00 PMSkills:--Requires a minimum of two years working in a manufacturing environment.--Individual will be exposed to coolant/lubricant chemicals and airborne particles.--Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.--Individuals will work near moving mechanical parts of machinery and electrically activated devices.Education:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or equivalent. Must be 18 years of age or older. Requires a minimum of two years working in a manufacturing environment Requires passing a pre-employment screening, including a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $22.86 per hour
      • 2:00 PM - 10:00 PM
      We have another great Direct Hire Opportunity with a fabulous manufacturer in Mankato that offer! Don't miss out on this one and APPLY TODAY for this rare opportunity with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company. Note: All training will be done on 1st shift from 6:00 a.m - 2:00 p.m. with a pay rate of $21.61 an hour. When you move to your regular 2nd shift, you will receive a $1.25 differential for a total of $22.86 an hour!Typical hours will be Monday - Friday, 2nd shift from 2:00 p.m. - 10:00 p.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 2:00 PM - 10:00 PMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for o
      We have another great Direct Hire Opportunity with a fabulous manufacturer in Mankato that offer! Don't miss out on this one and APPLY TODAY for this rare opportunity with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company. Note: All training will be done on 1st shift from 6:00 a.m - 2:00 p.m. with a pay rate of $21.61 an hour. When you move to your regular 2nd shift, you will receive a $1.25 differential for a total of $22.86 an hour!Typical hours will be Monday - Friday, 2nd shift from 2:00 p.m. - 10:00 p.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 2:00 PM - 10:00 PMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for o
      • Mankato, Minnesota
      • Permanent
      • $22.86 per hour
      • 10:00 PM - 6:00 AM
      GREAT PAY and BENEFITS with a GREAT COMPANY! DIRECT HIRE PRODUCTION POSITIONS now available with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company. Note: All training will be done on 1st shift from 6:00 a.m - 2:00 p.m. with a pay rate of $21.61 an hour. When you move to your regular 3rd shift, you will receive a $1.25 differential for a total of $22.86 an hour!Typical hours will be Sunday - Thursday, 3rd shift from 10:00 p.m. - 6:00 a.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained Mix ingredients according to specified procedures and formulasWorking hours: 10:00 PM - 6:00 AMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Abili
      GREAT PAY and BENEFITS with a GREAT COMPANY! DIRECT HIRE PRODUCTION POSITIONS now available with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company. Note: All training will be done on 1st shift from 6:00 a.m - 2:00 p.m. with a pay rate of $21.61 an hour. When you move to your regular 3rd shift, you will receive a $1.25 differential for a total of $22.86 an hour!Typical hours will be Sunday - Thursday, 3rd shift from 10:00 p.m. - 6:00 a.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained Mix ingredients according to specified procedures and formulasWorking hours: 10:00 PM - 6:00 AMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Abili

    Thank you for subscribing to your personalized job alerts.

    Explore over 14 jobs in Minnesota

    It looks like you want to switch your language. This will reset your filters on your current job search.