89 jobs found for 3rd Shift

Spherion Staffing is hiring General Laborers to work in Warsaw, IN.Shift and Pay:Monday - Friday 10PM - 6:30AM $12.50/HRResponsibilities:Racker/Packer - 1st/3rd shift- Processes parts per Technical Process Sheet- Apply parts to rack for tankroom personnel for anodize process- After processing packer will remove parts from rack- Inspect parts for imperfections- Pack parts for final inspection - Verify quantities of parts before and after processing- Ability to work in fast paced environment - Attention to detail- Follow Safety Guidelines and wear required PPE gearDeep Image Operator - 1st/3rd shift- Processes parts per Technical Process Sheet - Verifies quantities of parts before and after processing - Assists in production enhancing aluminum anodizing products with full color graphics - Visually inspects parts for imperfections before and after process - Ability to work in fast paced environment - Attention to detail - Follow Safety Guidelines and wear required PPE gear Rack Maintenance - 1st shift- Processes parts per Technical Process Sheet - Follow Safety Guidelines and wear required PPE gear - Build, Repair and disassemble racking systems to support floor production - Maintenance tanks to support production staffing - Ability to work in fast paced environment - Attention to detail- Forklift experience preferred Masker - 1st/3rd shift- Processes parts per Technical Process Sheet - Inspect parts for imperfection - Mask off areas of part per blue print prior to anodizing process - Remove masking after anodize - Verify quantities of parts before and after processing - Ability to work in fast paced environment - Attention to detail - Follow Safety Guidelines and wear required PPE gear LFC Plater - 3rd shift- Preparing parts for plating - Controlling rectifiers and plating parameters to achieve desired finish - Verifying and recording processing information on written logs - Recognizing quality problems and provide correction actions- Maintaining process solutions - Ability to read blue prints - Use of X-Ray and other instruments to verify plating thicknessWorking hours: 10:00 PM - 6:30 AMSkills:- Forklift experience - 6 months in the past 18 months- Attention to detail- Ability to work in a fast paced environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:- No degree required Apply Today! Once you apply, call or text 574-306-5566 to speak with a recruiter!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Jeld-Wen, in partnership with Spherion Mid Ohio, has fantastic entry-level assembler positions available in Mount Vernon, Ohio at one of the world’s largest manufacturers of doors and windows! 1st Shift (7am - 3:30pm) 2nd Shift (3:30pm-12am) 3rd Shift (10pm - 6:30am) Monday - Friday (some Saturdays) Overtime as needed - won’t ever work more than a 10hr day Pay Rate 1st Shift - $17.50/hr 2nd Shift - $18.00/hr 3rd Shift - $18.50/hr

Responsible for routine repairs, scheduled maintenance and cleaning of assigned knitting machines, sock sizing, occasional size and style changes and correcting any conditions or situations pertaining to the assigned knitting machines that adversely affect the quality or production of goods produced.Responsibilities:Must be able to accurately identify flaws in the product and make the appropriate repair(s) necessary to knitting machines to correct the problem(s).Must be flexible to work on different machines to meet production demands on a daily basis.Read and follow specification charts and materials accurately.Check stop motions daily to ensure they are working properly.Oil knitting machines without automatic oilers every two hours.Ensure that knitting machines with automatic oilers are kept full of needle oil and working properly.Blow off knitting machines with air hose four or more times per shift. Air hose must be at 30 psi.Size socks once per shift.Size socks immediately following a size or style change and anytime requested to do so by the Knitter(s). Size changes, hang one sock inside out and one right side out on machine.Participate in providing and receiving feedback to Supervisor and other members.Listen to instruction and feedback from Supervisor to improve performance.Monitor own break times ? begin work and return from breaks on time.Assist Supervisor in achieving a productive team by assisting other team members with production demands or absences.Perform size and style changes on knitting machines as requested.Make all attempts to reduce waste when threading and repairing machines.Must assume the knitters cycle of machines while Knitters are on break.Must communicate known problems with assigned knitting machines to the next Mechanic coming on duty.Keep all broken needles, sinkers, etc. picked up from the machines and the floor at all times.Accurately complete style and size change slips, lycra tension slips, and any other required paperwork in a timely manner and route them to the appropriate person.Follow all required machine flagging procedures during repairs.Prompt and regular attendance is required.Working hours: 10:30 PM - 7:00 AMSkills:Able to use the following hand tools: Tool pouch and belt, pliers, open end wrenches, allen wrenches, tape measurer, screw drivers, Tape Measurer, Vice Grips, Tweezers, Crescent Wrench, Magnets, Punch, Power Grinder, and more.PROTECTIVE EQUIPMENT REQUIRED: Must wear approved hearing protection (i.e. ear plugs).Must wear long hair pulled back and tied.Must wear safety glasses when neededEducation:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read and write legibly.Must successfully complete the Line Mechanic Training Program.Maintenance or mechanical experience desired.ust achieve a passing grade on Mechanical Comprehension Test. Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Responsible for routine repairs, scheduled maintenance and cleaning of assigned knitting machines, sock sizing, occasional size and style changes and correcting any conditions or situations pertaining to the assigned knitting machines that adversely affect the quality or production of goods produced.Responsibilities:Must be able to accurately identify flaws in the product and make the appropriate repair(s) necessary to knitting machines to correct the problem(s).Must be flexible to work on different machines to meet production demands on a daily basis.Read and follow specification charts and materials accurately.Check stop motions daily to ensure they are working properly.Oil knitting machines without automatic oilers every two hours.Ensure that knitting machines with automatic oilers are kept full of needle oil and working properly.Blow off knitting machines with air hose four or more times per shift. Air hose must be at 30 psi.Size socks once per shift.Size socks immediately following a size or style change and anytime requested to do so by the Knitter(s). Size changes, hang one sock inside out and one right side out on machine.Participate in providing and receiving feedback to Supervisor and other members.Listen to instruction and feedback from Supervisor to improve performance.Monitor own break times ? begin work and return from breaks on time.Assist Supervisor in achieving a productive team by assisting other team members with production demands or absences.Perform size and style changes on knitting machines as requested.Make all attempts to reduce waste when threading and repairing machines.Must assume the knitters cycle of machines while Knitters are on break.Must communicate known problems with assigned knitting machines to the next Mechanic coming on duty.Keep all broken needles, sinkers, etc. picked up from the machines and the floor at all times.Accurately complete style and size change slips, lycra tension slips, and any other required paperwork in a timely manner and route them to the appropriate person.Follow all required machine flagging procedures during repairs.Prompt and regular attendance is required.Working hours: 10:30 PM - 7:00 AMSkills:Able to use the following hand tools: Tool pouch and belt, pliers, open end wrenches, allen wrenches, tape measurer, screw drivers, Tape Measurer, Vice Grips, Tweezers, Crescent Wrench, Magnets, Punch, Power Grinder, and more.PROTECTIVE EQUIPMENT REQUIRED: Must wear approved hearing protection (i.e. ear plugs).Must wear long hair pulled back and tied.Must wear safety glasses when neededEducation:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read and write legibly.Must successfully complete the Line Mechanic Training Program.Maintenance or mechanical experience desired.ust achieve a passing grade on Mechanical Comprehension Test. Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Responsible for routine repairs, scheduled maintenance and cleaning of assigned knitting machines, sock sizing, occasional size and style changes and correcting any conditions or situations pertaining to the assigned knitting machines that adversely affect the quality or production of goods produced.Responsibilities:Must be able to accurately identify flaws in the product and make the appropriate repair(s) necessary to knitting machines to correct the problem(s).Must be flexible to work on different machines to meet production demands on a daily basis.Read and follow specification charts and materials accurately.Check stop motions daily to ensure they are working properly.Oil knitting machines without automatic oilers every two hours.Ensure that knitting machines with automatic oilers are kept full of needle oil and working properly.Blow off knitting machines with air hose four or more times per shift. Air hose must be at 30 psi.Size socks once per shift.Size socks immediately following a size or style change and anytime requested to do so by the Knitter(s). Size changes, hang one sock inside out and one right side out on machine.Participate in providing and receiving feedback to Supervisor and other members.Listen to instruction and feedback from Supervisor to improve performance.Monitor own break times ? begin work and return from breaks on time.Assist Supervisor in achieving a productive team by assisting other team members with production demands or absences.Perform size and style changes on knitting machines as requested.Make all attempts to reduce waste when threading and repairing machines.Must assume the knitters cycle of machines while Knitters are on break.Must communicate known problems with assigned knitting machines to the next Mechanic coming on duty.Keep all broken needles, sinkers, etc. picked up from the machines and the floor at all times.Accurately complete style and size change slips, lycra tension slips, and any other required paperwork in a timely manner and route them to the appropriate person.Follow all required machine flagging procedures during repairs.Prompt and regular attendance is required.Working hours: 10:30 PM - 7:00 AMSkills:Able to use the following hand tools: Tool pouch and belt, pliers, open end wrenches, allen wrenches, tape measurer, screw drivers, Tape Measurer, Vice Grips, Tweezers, Crescent Wrench, Magnets, Punch, Power Grinder, and more.PROTECTIVE EQUIPMENT REQUIRED: Must wear approved hearing protection (i.e. ear plugs).Must wear long hair pulled back and tied.Must wear safety glasses when neededEducation:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read and write legibly.Must successfully complete the Line Mechanic Training Program.Maintenance or mechanical experience desired.ust achieve a passing grade on Mechanical Comprehension Test. Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Looking for full time work that offers great pay and the weekends off? Spherion Mid Ohio has Press Operator positions available in Fredericksburg, Ohio and there has been a pay increase! 2nd Shift (4pm - midnight) 3rd Shift (midnight - 8am) Monday - Friday NEW Starting Pay Rate = $16.00/hr

Manufacturing Support - 3rd ShiftWill work Sunday - Thursday 11:00pm - 7:30am with potential for overtime daily or on FridaysLoading and unloading, Assembly or finishing of product in manufacturing support role. Workers will performs a variety of job duties. Potential for converting to full time with the client after 90 days.Responsibilities:work with metal parts on tables/stands or in floor racksRetrieve metal parts from racks and carrying them to assembly stationsRetrieve attachments off of racksRetrieve boxes of small components (nuts, bolts, etc.) from shelves that are stocked by shipping/receivingAttach nuts, brackets, lights, wiring and plastic components to the bumperPush/pull racks of metal partsMove metal parts from one assembly station to the next as they move thru the assembly processWorking hours: 11:00 PM - 7:30 AMSkills:Ability to walk, stand, bend, twist and lift for entire shift.Education:High SchoolExperience:1-4 yearsQualifications:Previous manufacturing experience helpful but not required.Willing to submit to background check and drug screening requirements. Apply today at spherion.com/apply/75102For every week you work for Spherion from July 12 - September 15, you get an entry to win awesome prizes in The Spherion Works Sweepstakes. We're giving away prizes each week and one lucky employee will drive to work in the grand prize: a new sports car!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Are you looking for a temp-to-perm career path in the manufacturing industry? If so, this could be the opportunity for you! Our client, a large manufacturingcompany in the Carpinteria area, has several immediate needs for **SECOND AND THIRD SHIFT** manufacturing operators to work as part of their team! Employees will set up and operate a variety of machines in order to produce materials, may deliver raw material and intermediates to production sites and/or keep departments clean and orderly. Assists in a variety of routine duties in the operation and preparation of equipment and materials.Responsibilities:- Performs routine tasks such as cleaning, weighing, and setup of systems for operation, packaging, and in-process testing.- Learns and adheres to safety rules for the work area as it pertains to handling chemicals and equipment.- May operate forklift.- Assembles and delivers materials and supplies.- Works from manufacturing procedures and written and verbal instructions.- May perform simple manufacturing or machine operations.- Keeps facility clean and supplies stocked.- May be required to wear special garments in controlled manufacturing environments that include synthetic material coveralls, beard covers, bouffant caps, booties and/or powder free vinyl gloves.- Must be regular and punctual in attendance- Responsible for maintaining quality within the scope of the job description.Working hours: 11:00 AM - 7:00 AMSkills:- Computer literate (Microsoft Excel, Microsoft Word) preferred;- Ability to follow verbal and written instructions.- Good math aptitude.- Previous experience in a manufacturing atmosphere is preferred- May have to pass forklift certification.Education:High SchoolExperience:1-4 yearsQualifications:- High school diploma or general education degree (GED) preferred;- one to three months related experience and/or training; or equivalent combination of education and experience. Apply with resume TODAY to be considered for this great career opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.San Francisco Fair Chance Ordinance:Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.

We are currently recruiting for 3rd shift Print and Insert Operators! This role is working at the State of WI in a long-term stable contract role with enhanced benefits and bonus opportunities based on production rates! If you have a great attitude, and some mechanical aptitude, this role is for you!Team members at BPAD are trained to use state-of-the-art printing and mailing equipment as well as the programs and systems that are necessary to run that equipment. We work hand in hand with our State partners to ensure that our jobs are completed on time and accurately. We enjoy the satisfaction of knowing that we make a difference to the citizens of Wisconsin, and we accomplish great things for the State. On any given day, our team members might be printing and/or mailing a last-minute job for the Governor, or a standard job for the Department of Transportation. Our print and mail jobs are varied in volume and type, and that just adds to the uniqueness of our work. All of this makes working on assignment at BPAD dynamic and fun.BPAD is a great place to work! Operators on assignment at BPAD enjoy the following:- Paid time off- Paid Holidays- Opportunities to work overtime- Paid breaks- Long term assignment (Spherion has held this contract for over 20 years)- Productivity bonus program- Clean, comfortable, climate-controlled work environment- Cross Training Opportunities- Great Growth Opportunities. In fact, the entire State Leadership Team at BPAD began their careers as Operators with Spherion!The position is located on Madison's east side.3rd shift hours: 11:00 PM - 7:30 AM Sunday-ThursdayResponsibilities:- Operating computerized mail insert equipment and completing detailed tracking paperwork- Working quickly to ensure delivery deadlines are met- Maintaining own work station and assisting where neededWorking hours: 11:00 PM - 7:30 AMSkills:- Candidates must be able to handle high volume print jobs- Candidates must also be reliable and looking for a long-term career role. This is an excellent opportunity with great pay and top incentivesEducation:High SchoolExperience:1-4 yearsQualifications:- High school Diploma/GED required- Previous experience in production- Previous experience in Print/insert operation preferred- Good math skills, good MS Windows knowledge, and a high mechanical aptitude Apply via the apply button in the right hand corner!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

1st Shift & 3rd Shift Forklift Drivers needed for facility in Bedford County!  In this role, you will load and unload product from trucks, verify labeling and placement of material within the warehouse.  Material movement throughout production is required, as is gathering and organizing finished assemblies. This facility maintains a clean and organized warehouse and you'll be a major part of keeping the facility looking spectacular.  

Operate a machine that makes screwsResponsibilities:- Load machine with product to create screws - Operate machine in the proper way- Pack and Label boxes of screwsWorking hours: 11:00 PM - 7:30 AMSkills:- Attention to detail - Ability to standEducation:No Degree RequiredExperience:0-1 yearsQualifications:Knowledge about operating machinery Let's get to Work! Apply Now! Call or text 513-771-4455!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Environmental Technician / Sanitation positions are available in Sandusky at Imagine Baking! If you love to be around the aroma of fresh baked goods this is a perfect opportunity! This is a long-term employment opportunity with benefits! 3rd Shift  9pm -6am Mon thru Thursday 9pm-9am Friday  Saturdays as needed Starting Pay Rate = $14.75 - $17.00/hr 

Visually inspect and manually sort castings according to finishing needs. Use snag grinder and/or face grinder to remove casting defects, place castings in appropriate container to prevent product mixing, direct castings from conveyor belt into tubs on the shakeout operation, perform material handling, other duties as assignedResponsibilities:Visually inspect and manually sort castings according to finishing needs. Use snag grinder and/or face grinder to remove casting defects, place castings in appropriate container to prevent product mixing, direct castings from conveyor belt into tubs on the shakeout operation, perform material handling, other duties as assignedSome overtime may be required as well as some weekendsWorking hours: 8:00 PM - 4:30 AMWorking hours: 8:00 PM - 4:30 AMSkills:FlexibilitySorting, checking, inspecting productDetail-orientedteam playerSafety bootsEducation:High SchoolExperience:1-4 yearsQualifications:1-3 years exp in role-preferredSkillfully use machine tools, hand tools and measuring instrumentsKnowledge of assembly and repair techniques preferred Submit resume online today!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is hiring Machine Operators in the powdered metal industry in St Marys, PA.    Weekly Pay $13/hr to start, $13.50/hr after you worked 300 hours    2nd & 3rd shift opportunities  Job Description:    Operate a variety of production machines    Conduct tests and measurements on products    Inspect the finished parts to detect imperfections  Apply Now or call 814.834.1001 for more information.

We are hiring for construction laborers in Woodland, PA!  - Weekly pay!  - 2nd or 3rd shift opportunities! - $14/hr starting wage, earn up to $20/hr! Description of position: Repair product in a timely, productive manner Create a useable product Don’t delay, we’re hiring immediately. If you aren’t quite ready to apply, call/text us for more information 814-375-9675

A family owned and operated business located in Dalton, Ohio is looking for CNC and Saw Operators. Positions are available on multiple shifts and provide the opportunity for permanent placement! 1st Shift (6am - 2:30/3:30) 2nd Shift (2:00pm - 10:30pm) 3rd Shift (10pm - 6:30am) Monday - Friday (some Saturday OT) Pay Rate= $12.50 - $15.00/hr

Operate an assigned set of knitting machines and inspect sock quality to produce a product that meets or exceeds customer specifications.Responsibilities:Run knitting machines on different lines to meet production demands on a daily basis.Communicate with the Mechanic regarding flaws in the knitting process and any other conditions pertaining to the knitting machines that could cause off-quality products. Must be able to repair yarn breaks and start up mechanical stops as required. Read and follow work orders and manufacturing specifications accurately.At the beginning of the shift, collect correct materials, per work orders, push the cart to assigned knitting line and place supplies behind knitting machines. Empty carts weigh from twenty-five to thirty pounds. Filled carts weigh from fifty to one hundred pounds. Obtaining yarns should be done at the start and middle of the shift and when a style or color change occurs. Grasp cone(s) of yarn/nylon weighing up to five pounds and place on spindle of yarn rack located behind knitting machine. Spindle heights range from thirty-eight to seventy inches from the floor. Thread the knitting machines by properly threading yarn/nylon through small eyelets as necessary. Requires reaching above shoulder level. Bend over and grasp socks that have accumulated in the knitting machine When cycling, thoroughly inspect the last sock knit at each machine. Inspect additional socks if a defect is observed. With one hand, pull one sock its full length over other hand and arm, twist arm and spread fingers apart to get a close look at the quality of the knitting. Pull sock off arm inside out and repeat process, inspecting the inside of the sock. Pull the sock off right side out. Every sixth sock knit by each assigned machine is to be inspected in this manner. During an eight hour shift, an average of four hundred (400) socks would be inspected in this manner. Complete daily work tickets, production forms and all other required paperwork in a timely manner.Ensure that the correct materials are threaded into each assigned machine. When changing colors, notify your Mechanic so that he can re-size the sock.Notify Mechanic when a sizing problem is detected so Mechanic can size socks and adjust machines as necessary.Participate in five minute exercise program twice daily.Prompt and regular attendance is required.MACHINES, TOOLS USED: Knitting machines, Nippers/scissors, Tweezers, Apron, Wheeled carts, Step stool, Bundle tiesPROTECTIVE EQUIP REQUIRED:Must wear approved hearing protection (i.e. ear plugs)Must wear long hair pulled back.Working hours: 10:30 PM - 6:00 AMSkills:Must possess sufficient manual dexterity, hand/eye coordination and general stamina to work on a highly repetitive job.Education:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read and write legibly.Must be able to add and subtract (including fractions) without using a calculator.No Experience required. Will train Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

MACHINE OPERATORSLocal manufacturer in Bristol VA needs MACHINE OPERATORS on ALL SHIFTS. . Temp to hire opportunity after 30/60 days based on ATTENDANCE AND PERFORMANCE.Once hired on perm, the company benefits include:10 paid holidays, bereavement, safety glasses and safety shoes bonus. After thirty days of employment/1st of the month, eligible for Medical which includes medical, dental, prescription and vision. Also life insurance and short-***term. Paid vacation and 401-K Profit Sharing Plan and Trust.Pay rate: $13 hr with $.50 shift diff for 2nd and 3rd shift. **Openings on 1st, 2nd and 3rd shift Shift Times: 7am-3pm; 3pm-11pm; 11pm-7am ***Must be able to work OT on Saturday as neededResponsibilities:Operators use roven, resin and paint mixture to create fiberglass materialsWorking hours: 7:00 AM - 3:00 PM (Various Shifts Available)Skills:Machine OperationTape MeasureEducation:No Degree RequiredExperience:0-1 yearsQualifications:REQUIREMENTS:- Manufacturing experience a plus- Able to read a tape measure- Good work history and attendance record- Work in an industrial environment with strong smells- Bending, stooping, and lifting up to 50 lbs. occasionally.- Ability to successfully complete DS and background Eligible candidates may apply at www.spherion.com/apply then contact our office at 423-283-0607 for a phone interview and to be scheduled for a plant tour.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Operate an assigned set of knitting machines and inspect sock quality to produce a product that meets or exceeds customer specifications.Responsibilities:Run knitting machines on different lines to meet production demands on a daily basis.Communicate with the Mechanic regarding flaws in the knitting process and any other conditions pertaining to the knitting machines that could cause off-quality products. Must be able to repair yarn breaks and start up mechanical stops as required. Read and follow work orders and manufacturing specifications accurately.At the beginning of the shift, collect correct materials, per work orders, push the cart to assigned knitting line and place supplies behind knitting machines. Empty carts weigh from twenty-five to thirty pounds. Filled carts weigh from fifty to one hundred pounds. Obtaining yarns should be done at the start and middle of the shift and when a style or color change occurs. Grasp cone(s) of yarn/nylon weighing up to five pounds and place on spindle of yarn rack located behind knitting machine. Spindle heights range from thirty-eight to seventy inches from the floor. Thread the knitting machines by properly threading yarn/nylon through small eyelets as necessary. Requires reaching above shoulder level. Bend over and grasp socks that have accumulated in the knitting machine When cycling, thoroughly inspect the last sock knit at each machine. Inspect additional socks if a defect is observed. With one hand, pull one sock its full length over other hand and arm, twist arm and spread fingers apart to get a close look at the quality of the knitting. Pull sock off arm inside out and repeat process, inspecting the inside of the sock. Pull the sock off right side out. Every sixth sock knit by each assigned machine is to be inspected in this manner. During an eight hour shift, an average of four hundred (400) socks would be inspected in this manner. Complete daily work tickets, production forms and all other required paperwork in a timely manner.Ensure that the correct materials are threaded into each assigned machine. When changing colors, notify your Mechanic so that he can re-size the sock.Notify Mechanic when a sizing problem is detected so Mechanic can size socks and adjust machines as necessary.Participate in five minute exercise program twice daily.Prompt and regular attendance is required.MACHINES, TOOLS USED: Knitting machines, Nippers/scissors, Tweezers, Apron, Wheeled carts, Step stool, Bundle tiesPROTECTIVE EQUIP REQUIRED:Must wear approved hearing protection (i.e. ear plugs)Must wear long hair pulled back.Working hours: 10:30 PM - 6:00 AMSkills:Must possess sufficient manual dexterity, hand/eye coordination and general stamina to work on a highly repetitive job.Education:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read and write legibly.Must be able to add and subtract (including fractions) without using a calculator.No Experience required. Will train Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Production Associate job summary:This is a production associate position for 1st, 2nd and 3rd shift. 1st shift 6am-2:30pm, 2nd shift from 2:00 p.m. to 10 30p.m and 3rd shift 10:30pm-7am. There are slight variances on the shift times. Candidate will operate production machines, ensures the equipment and area is clean and available for the following shift. We are looking for keepers. Those people who want to work for a business that puts employees first, those who want to move into a long term hire position and who want to grow their career with the company, call us.Responsibilities:Production Associate responsibilities:Maintain a safe and clean work space.Carry out production, inspection, packaging and machine operation duties.Perform appropriate duties as assigned by management.Follow established safety rules and regulations.Set up machinery and ensure all materials are readily available.Effectively monitor production equipment.Working hours: Various Shifts AvailableSkills:Production Associate skills:Production associate experience in a manufacturing setting.Committed to quality, safety and communicationTeam-oriented and self-directedAble to stand for a 8 hour work shiftEducation:High SchoolExperience:1-4 yearsQualifications:Production Associate Qualifications:2+ years' production associate experience in a manufacturing settingHigh School Diploma/G.E.D.Background check and drug test required Please enter to win our Ford MustangSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Staffing is hiring Factory Production Workers to work in Columbia City, IN.Shifts and Pay:2nd Shift: Monday-Friday 3PM - 11:30PM - $17.12/HR3rd Shift: Monday-Friday 11PM - 7:30AM - $16.64/HR**Overtime Available**PAY INCREASE AFTER 90 DAYS!2nd Shift: $17.92/HR3rd Shift: $17.42/HRResponsibilities:- Operate automated equipment- Set up and adjust machine and equipment for production runs.- Ensure equipment is adequately supplied with raw material- Address faults and issues on the production line- Clean, lubricate and maintain machine to ensure its optimum operation.- Troubleshoot issues and submit requests for maintenance as needed.- Ensure health and safety requirements and procedures are adhered to.Working hours: Various Shifts AvailableSkills:- Can-do attitude, ownership of your work, and good attendance are essential- Enjoy a dynamic work environment and taking on challenges- Work shifts and overtime as necessary- Ability to work day, afternoon or night shift- Mechanical aptitude and troubleshooting ability- Be able to work in a plant environment- Be able to do hard workEducation:High SchoolExperience:1-4 yearsQualifications:- High School diploma or GED - Must be able to lift up to 50lbs- 2 years of experience in a manufacturing environment- Experience operating manufacturing machinery preferred- Operate forklift, front end loader, and power tools- Pass a drug screen and participate in weekly randomized drug screens Apply Today! Once you apply, call or text 574-306-5566 to speak with a recruiter!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

A bakery in Somerset is currently looking for a 3rd shift Material Handler.  The purpose of the material handler will wrap or package products from shelves and place on trucks for delivery.  The right candidate will also be cross trained to work in the pack room as well.  Third Shift - 10:00 pm to 6:00 am Sunday through Thursday with possible OT.  Pay is $18.25 per hour. Apply on our website:  www.spherionPAjobs.com click on the "Apply Now" button at the upper right-hand corner and complete our application!      

Operate an assigned set of knitting machines and inspect sock quality to produce a product that meets or exceeds customer specifications.Responsibilities:Run knitting machines on different lines to meet production demands on a daily basis.Communicate with the Mechanic regarding flaws in the knitting process and any other conditions pertaining to the knitting machines that could cause off-quality products. Must be able to repair yarn breaks and start up mechanical stops as required. Read and follow work orders and manufacturing specifications accurately.At the beginning of the shift, collect correct materials, per work orders, push the cart to assigned knitting line and place supplies behind knitting machines. Empty carts weigh from twenty-five to thirty pounds. Filled carts weigh from fifty to one hundred pounds. Obtaining yarns should be done at the start and middle of the shift and when a style or color change occurs. Grasp cone(s) of yarn/nylon weighing up to five pounds and place on spindle of yarn rack located behind knitting machine. Spindle heights range from thirty-eight to seventy inches from the floor. Thread the knitting machines by properly threading yarn/nylon through small eyelets as necessary. Requires reaching above shoulder level. Bend over and grasp socks that have accumulated in the knitting machine When cycling, thoroughly inspect the last sock knit at each machine. Inspect additional socks if a defect is observed. With one hand, pull one sock its full length over other hand and arm, twist arm and spread fingers apart to get a close look at the quality of the knitting. Pull sock off arm inside out and repeat process, inspecting the inside of the sock. Pull the sock off right side out. Every sixth sock knit by each assigned machine is to be inspected in this manner. During an eight hour shift, an average of four hundred (400) socks would be inspected in this manner. Complete daily work tickets, production forms and all other required paperwork in a timely manner.Ensure that the correct materials are threaded into each assigned machine. When changing colors, notify your Mechanic so that he can re-size the sock.Notify Mechanic when a sizing problem is detected so Mechanic can size socks and adjust machines as necessary.Participate in five minute exercise program twice daily.Prompt and regular attendance is required.MACHINES, TOOLS USED: Knitting machines, Nippers/scissors, Tweezers, Apron, Wheeled carts, Step stool, Bundle tiesPROTECTIVE EQUIP REQUIRED:Must wear approved hearing protection (i.e. ear plugs)Must wear long hair pulled back.Working hours: 10:30 PM - 6:00 AMSkills:Must possess sufficient manual dexterity, hand/eye coordination and general stamina to work on a highly repetitive job.Education:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read and write legibly.Must be able to add and subtract (including fractions) without using a calculator.No Experience required. Will train Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Staffing has openings on 3rd shift for Manufacturing- Assembly associates to work with a local manufacturing company. Successful applicant will operate computer automated, high-tech machinery and equipment to produce glass units. This is a VERY physical position.$18/hour10:30pm - 6:30am Sunday - Thursday, OT as neededResponsibilities:- Run production machines that cut glass- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 10:30 PM - 6:30 AMSkills:Requirements:-High School diploma or GED -Previous assembly experience preferred-Must be able to read a tape measure-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basis-Physically capable of manual labor that includes standing, walking, lifting, bending, and reachingEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Are you looking for a new career? Somewhere where you can learn, grow, and work your way up all while maintaining a work-life balance? Spherion Mid Ohio has the perfect opportunity for you! A global manufacturing company located in Wooster, OH, is looking for hardworking Machine Operators to join their team. Their “open-door” policy creates a culture where YOUR voice can be heard. With regular company wide meetings, and even the president walking the floor, you’ll feel heard and valued. Shifts Available: 2nd Shift (2:00pm-10:20pm) 3rd Shift (10:00pm-6:20am) Monday - Friday w/ possible OT Starting Pay Rate = $13.75 - $13.90/hr

cope of Role:This position is part of the production team, reporting directly to the shift supervisor and/or team leader2nd and 3rd shift available.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:No Degree RequiredExperience:0-1 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Are you ready to join the growing Powdered Metal industry? We are hiring Operators in Sykesville! Weekly Pay!  1st, 2nd & 3rd shift opportunities! 8hr shifts .50/hr shift differentials for 2nd & 3rd shifts! Job Descritpion: Operate equipment to maintain product Handle manufactured products properly to not cause damage Perform all required inspections and tasks for the process Don't delay, we're hiring as quickly as possible! Apply now! www.spherionpajobs.com/apply.php 

2nd & 3rd shift, make your own schedule, choose hours & days of the week you work.Responsibilities:Working in some aspect of assembly on production line.Working hours: Various Shifts AvailableSkills:Ability to lift up to 40lbs & be on your feet for your entire shift.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma or GED .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Operate an assigned set of knitting machines and inspect sock quality to produce a product that meets or exceeds customer specifications.Responsibilities:Run knitting machines on different lines to meet production demands on a daily basis.Communicate with the Mechanic regarding flaws in the knitting process and any other conditions pertaining to the knitting machines that could cause off-quality products. Must be able to repair yarn breaks and start up mechanical stops as required. Read and follow work orders and manufacturing specifications accurately.At the beginning of the shift, collect correct materials, per work orders, push the cart to assigned knitting line and place supplies behind knitting machines. Empty carts weigh from twenty-five to thirty pounds. Filled carts weigh from fifty to one hundred pounds. Obtaining yarns should be done at the start and middle of the shift and when a style or color change occurs. Grasp cone(s) of yarn/nylon weighing up to five pounds and place on spindle of yarn rack located behind knitting machine. Spindle heights range from thirty-eight to seventy inches from the floor. Thread the knitting machines by properly threading yarn/nylon through small eyelets as necessary. Requires reaching above shoulder level. Bend over and grasp socks that have accumulated in the knitting machine When cycling, thoroughly inspect the last sock knit at each machine. Inspect additional socks if a defect is observed. With one hand, pull one sock its full length over other hand and arm, twist arm and spread fingers apart to get a close look at the quality of the knitting. Pull sock off arm inside out and repeat process, inspecting the inside of the sock. Pull the sock off right side out. Every sixth sock knit by each assigned machine is to be inspected in this manner. During an eight hour shift, an average of four hundred (400) socks would be inspected in this manner. Complete daily work tickets, production forms and all other required paperwork in a timely manner.Ensure that the correct materials are threaded into each assigned machine. When changing colors, notify your Mechanic so that he can re-size the sock.Notify Mechanic when a sizing problem is detected so Mechanic can size socks and adjust machines as necessary.Participate in five minute exercise program twice daily.Prompt and regular attendance is required.MACHINES, TOOLS USED: Knitting machines, Nippers/scissors, Tweezers, Apron, Wheeled carts, Step stool, Bundle tiesPROTECTIVE EQUIP REQUIRED:Must wear approved hearing protection (i.e. ear plugs)Must wear long hair pulled back.Working hours: 10:30 PM - 6:00 AMSkills:Must possess sufficient manual dexterity, hand/eye coordination and general stamina to work on a highly repetitive job.Education:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read and write legibly.Must be able to add and subtract (including fractions) without using a calculator.No Experience required. Will train Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.