Thank you for subscribing to your personalized job alerts.

    39 jobs found for Assembly in Greencastle, Pennsylvania

    Filter2
    Clear all
      • Hagerstown, Maryland
      • Temp to Perm
      • $12.00 - $14.00 per hour
      • Various Shifts Available
      Working within a lumber facility to assemble trusses and panels to be distributed multiple builders.Multiple shifts available.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:Ability to read measurements on a tape measure or ruler.Use of basic hand tools.Education:High SchoolExperience:0-1 yearsQualifications:No experience necessary - willing to train Please call the Hagerstown Spherion Office at 301-739-6900.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Working within a lumber facility to assemble trusses and panels to be distributed multiple builders.Multiple shifts available.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:Ability to read measurements on a tape measure or ruler.Use of basic hand tools.Education:High SchoolExperience:0-1 yearsQualifications:No experience necessary - willing to train Please call the Hagerstown Spherion Office at 301-739-6900.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $12.00 - $14.00 per hour
      • Various Shifts Available
      Working within a lumber facility to assemble trusses and panels to be distributed multiple builders.Multiple shifts available.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:Ability to read measurements on a tape measure or ruler.Use of basic hand tools.Education:High SchoolExperience:0-1 yearsQualifications:No experience necessary - willing to train Please call the Hagerstown Spherion Office at 301-739-6900.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Working within a lumber facility to assemble trusses and panels to be distributed multiple builders.Multiple shifts available.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:Ability to read measurements on a tape measure or ruler.Use of basic hand tools.Education:High SchoolExperience:0-1 yearsQualifications:No experience necessary - willing to train Please call the Hagerstown Spherion Office at 301-739-6900.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $12.00 - $14.00 per hour
      • Various Shifts Available
      Working within a lumber facility to assemble trusses and panels to be distributed multiple builders.Multiple shifts available.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:Ability to read measurements on a tape measure or ruler.Use of basic hand tools.Education:High SchoolExperience:0-1 yearsQualifications:No experience necessary - willing to train Please call the Hagerstown Spherion Office at 301-739-6900.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Working within a lumber facility to assemble trusses and panels to be distributed multiple builders.Multiple shifts available.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:Ability to read measurements on a tape measure or ruler.Use of basic hand tools.Education:High SchoolExperience:0-1 yearsQualifications:No experience necessary - willing to train Please call the Hagerstown Spherion Office at 301-739-6900.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $12.00 - $14.00 per hour
      • Various Shifts Available
      Working within a lumber facility to assemble trusses and panels to be distributed multiple builders.Multiple shifts available.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:Ability to read measurements on a tape measure or ruler.Use of basic hand tools.Education:High SchoolExperience:0-1 yearsQualifications:No experience necessary - willing to train Please call the Hagerstown Spherion Office at 301-739-6900.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Working within a lumber facility to assemble trusses and panels to be distributed multiple builders.Multiple shifts available.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:Ability to read measurements on a tape measure or ruler.Use of basic hand tools.Education:High SchoolExperience:0-1 yearsQualifications:No experience necessary - willing to train Please call the Hagerstown Spherion Office at 301-739-6900.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $12.00 - $14.00 per hour
      • Various Shifts Available
      Working within a lumber facility to assemble trusses and panels to be distributed multiple builders.Multiple shifts available.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:Ability to read measurements on a tape measure or ruler.Use of basic hand tools.Education:High SchoolExperience:0-1 yearsQualifications:No experience necessary - willing to train Please call the Hagerstown Spherion Office at 301-739-6900.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Working within a lumber facility to assemble trusses and panels to be distributed multiple builders.Multiple shifts available.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:Ability to read measurements on a tape measure or ruler.Use of basic hand tools.Education:High SchoolExperience:0-1 yearsQualifications:No experience necessary - willing to train Please call the Hagerstown Spherion Office at 301-739-6900.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PMSkills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PMSkills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $13.00 - $17.00 per hour
      • Various Shifts Available
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $13.00 - $17.00 per hour
      • Various Shifts Available
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $13.00 - $17.00 per hour
      • Various Shifts Available
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $13.00 - $17.00 per hour
      • Various Shifts Available
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $13.00 - $17.00 per hour
      • Various Shifts Available
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $13.00 - $17.00 per hour
      • Various Shifts Available
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $13.00 - $17.00 per hour
      • Various Shifts Available
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $13.00 - $17.00 per hour
      • Various Shifts Available
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Monday-Friday 8am-5pm OR Monday-Friday 7am-4pmPerform assembly of structures and industrial solutions with aluminum profiles in accordance with specifications,engineering drawings and instructions given.- Drilling and machining operations such as tapping, boring, drilling, boring, countersinking.- Reading technical drawings and blueprints using metric system.- Ensure that all required production documents and journals are kept up to date in accordance with the standardoperating procedures set by the company.- Communicating with the engineers to review designs and solutions.- Perform final review of assemblies and adjustments to correct any defects to ensure the quality of the deliveredproduct before handing over to quality control.- Perform installation, repair, inspection, and adjustment of solutions as required, at the company's facilities or atthe customer's facilities as required by the project from time to time.- Work under the manufacturing and assembly standards of the brand in order to ensure the quality of the assembledsolutions.- Multitask multiple responsibilities within the assembly/production department when needed to meet larger projectdemands.- Maintain the cleanliness and tidiness of the work area and keep it organized.High school diploma or equivalent required.- Requires a minimum of 2-3 years related experience, preferable experience with modular building kit systemswith aluminum profiles (brand examples item, BOSCH Rexroth, Minitec or Tube & Joint systems such asCreform, Trilogiq or NIS).- Profound knowledge of the metric system.- Communicating and Teamworkskills.- Ability to work individually and as part of a team.- High level of integrity and work ethic.- Reading of technical drawings.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $20.06 per hour
      • Various Shifts Available
      Monday-Saturday 10pm-6am. Can start ASAP. Must have previous assembly/ sanitation experience.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Monday-Saturday 10pm-6am. Can start ASAP. Must have previous assembly/ sanitation experience.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $20.06 per hour
      • Various Shifts Available
      Monday-Saturday 10pm-6am. Can start ASAP. Must have previous assembly/ sanitation experience.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Monday-Saturday 10pm-6am. Can start ASAP. Must have previous assembly/ sanitation experience.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $15.00 per hour
      • 6:00 AM - 2:00 PM (Various Shifts Available)
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PM (Various Shifts Available)Skills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PM (Various Shifts Available)Skills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $15.00 per hour
      • 6:00 AM - 2:00 PM
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PMSkills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PMSkills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Chambersburg, Pennsylvania
      • Temp to Perm
      • $15.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      Assemble and prepare product for shipmentResponsibilities:Cut material to appropriate lengthsAssemble productWorking hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Attention to detailMeasuringEducation:High SchoolExperience:1-4 yearsQualifications:Prior assembly experience is preferred Please call (717) 262-2430 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Assemble and prepare product for shipmentResponsibilities:Cut material to appropriate lengthsAssemble productWorking hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Attention to detailMeasuringEducation:High SchoolExperience:1-4 yearsQualifications:Prior assembly experience is preferred Please call (717) 262-2430 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Chambersburg, Pennsylvania
      • Temp to Perm
      • $14.50 per hour
      • Various Shifts Available
      Prep, cut, and add fittings to hosesResponsibilities:Follow directionsPrep materialsWorking hours: Various Shifts AvailableSkills:MeasuringEducation:No Degree RequiredExperience:1-4 yearsQualifications:Prior assembly experience is a plus .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Prep, cut, and add fittings to hosesResponsibilities:Follow directionsPrep materialsWorking hours: Various Shifts AvailableSkills:MeasuringEducation:No Degree RequiredExperience:1-4 yearsQualifications:Prior assembly experience is a plus .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Chambersburg, Pennsylvania
      • Temp to Perm
      • $15.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      Assemble and prepare product for shipmentResponsibilities:Cut material to appropriate lengthsAssemble productWorking hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Attention to detailMeasuringEducation:High SchoolExperience:1-4 yearsQualifications:Prior assembly experience is preferred Please call (717) 262-2430 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Assemble and prepare product for shipmentResponsibilities:Cut material to appropriate lengthsAssemble productWorking hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Attention to detailMeasuringEducation:High SchoolExperience:1-4 yearsQualifications:Prior assembly experience is preferred Please call (717) 262-2430 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Chambersburg, Pennsylvania
      • Temp to Perm
      • $15.00 per hour
      • 7:00 AM - 3:30 PM
      Assemble and prepare product for shipmentResponsibilities:Cut material to appropriate lengthsAssemble productWorking hours: 7:00 AM - 3:30 PMSkills:Attention to detailMeasuringEducation:High SchoolExperience:1-4 yearsQualifications:Prior assembly experience is preferred Please call (717) 262-2430 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Assemble and prepare product for shipmentResponsibilities:Cut material to appropriate lengthsAssemble productWorking hours: 7:00 AM - 3:30 PMSkills:Attention to detailMeasuringEducation:High SchoolExperience:1-4 yearsQualifications:Prior assembly experience is preferred Please call (717) 262-2430 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Chambersburg, Pennsylvania
      • Temp to Perm
      • $15.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      Assemble and prepare product for shipmentResponsibilities:Cut material to appropriate lengthsAssemble productWorking hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Attention to detailMeasuringEducation:High SchoolExperience:1-4 yearsQualifications:Prior assembly experience is preferred Please call (717) 262-2430 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Assemble and prepare product for shipmentResponsibilities:Cut material to appropriate lengthsAssemble productWorking hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Attention to detailMeasuringEducation:High SchoolExperience:1-4 yearsQualifications:Prior assembly experience is preferred Please call (717) 262-2430 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Chambersburg, Pennsylvania
      • Temp to Perm
      • $14.50 per hour
      • Various Shifts Available
      Operates equipment to couple various sizes and product lines of Hydraulic Hose Assemblies. Provide a quality product throughout the assembly and inspection process.Temp-hireFull TimeResponsibilities:assembling material to achieve desired result.Working hours: Various Shifts AvailableSkills:Good communication skills, works well as a team player.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED call 717-262-2430Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Operates equipment to couple various sizes and product lines of Hydraulic Hose Assemblies. Provide a quality product throughout the assembly and inspection process.Temp-hireFull TimeResponsibilities:assembling material to achieve desired result.Working hours: Various Shifts AvailableSkills:Good communication skills, works well as a team player.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED call 717-262-2430Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 39 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.