Thank you for subscribing to your personalized job alerts.

    16 jobs found for film

    Filter1
    Clear all
      • Hagerstown, Maryland
      • Temp to Perm
      • $15.00 per hour
      • 6:00 AM - 2:00 PM
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PMSkills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PMSkills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $15.00 per hour
      • 6:00 AM - 2:00 PM
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PMSkills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PMSkills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $15.00 per hour
      • 6:00 AM - 2:00 PM
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PMSkills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PMSkills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $15.00 per hour
      • 6:00 AM - 2:00 PM
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PMSkills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PMSkills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $15.00 per hour
      • 6:00 AM - 2:00 PM (Various Shifts Available)
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PM (Various Shifts Available)Skills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PM (Various Shifts Available)Skills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $15.00 per hour
      • 6:00 AM - 2:00 PM (Various Shifts Available)
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PM (Various Shifts Available)Skills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PM (Various Shifts Available)Skills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temp to Perm
      • $15.00 per hour
      • 6:00 AM - 2:00 PM (Various Shifts Available)
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PM (Various Shifts Available)Skills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position entails operating a Bolx machine, which requires a high level of attention, and close attention to detail. You must have at least 1-2 years of prior manufacturing experience. The schedule follows as:Monday-Friday 6am-2pmFull TimeTemp-Hire The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results. Must be able to read a ruler up to 1/10th of an inchEssential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressResponsibilities:Essential Duties & Responsibilities: - Unroll and lay out film along calibrated scale on cutting table, measure film with ruler and cut film into lengths. - Position patterns or templates on film and marks around pattern/template. - Cut notches or mark film for velcro or assembly. - Trim excess film - Label ID numbers on parts - Seal end of film using air or hand sealer- Use hydraulic clicking press - Operate video jet - Run drawing table- Use T-shirt pressWorking hours: 6:00 AM - 2:00 PM (Various Shifts Available)Skills:The ideal candidate has previous manufacturing experience, shows significant initiative and ability to foresee and correct issues before they arise, and a demonstrated history of following work instructions and producing quality results.-Must be able to read a ruler up to 1/10th of an inchEducation:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED are required. Call 301-739-6900 for more information on this job.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 per hour
      • 6:00 AM - 6:00 PM
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Womelsdorf, Pennsylvania
      • Temp to Perm
      • $14.00 - $15.50 per hour
      • Various Shifts Available
      Production facility looking for dependable candidates for variety of shifts.Responsibilities:You must get your own empty boxes then pick up two bags of chips inspect them to make sure they are sealed and the label is correct and put them into a box. One Temp will pick up full box and put on skid. (not heavy) In addition to packing and stacking they must help keep the equipment and work area clean. That includes disassembling the machines in their entirety and wiping everything down, sweeping the floors, taking out trash, changing film in the baggers.Working hours: Various Shifts AvailableSkills:- Must be able to stand for 12 hours- Ability to bend and stoop.- Reliable work history.Education:No Degree RequiredExperience:0-1 yearsQualifications:Entry level position. Please call or text us today with any questions - 717.273.8811!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Production facility looking for dependable candidates for variety of shifts.Responsibilities:You must get your own empty boxes then pick up two bags of chips inspect them to make sure they are sealed and the label is correct and put them into a box. One Temp will pick up full box and put on skid. (not heavy) In addition to packing and stacking they must help keep the equipment and work area clean. That includes disassembling the machines in their entirety and wiping everything down, sweeping the floors, taking out trash, changing film in the baggers.Working hours: Various Shifts AvailableSkills:- Must be able to stand for 12 hours- Ability to bend and stoop.- Reliable work history.Education:No Degree RequiredExperience:0-1 yearsQualifications:Entry level position. Please call or text us today with any questions - 717.273.8811!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Long Beach, Mississippi
      • Temporary
      • $11.00 per hour
      • 7:00 AM - 3:30 PM
      Our client is seeking a Material Handler/Packer to work in their warehouse. Apply today and feel free to reach out directly if you have any questions.Responsibilities:- Mounting of cabinets and vaults to pallets and placing them on designated skids.- Mounting of hoods onto cabinets and vaults.- Delivering cabinets and vaults to respective lines.- Producing foam packing inserts by mounting designated mold to platform, lining mold with proper film, injection foam into lined mold, curing, removing and placing formed insert into proper transfer cart.- Prepping finished units, and mechs, for final packaging.- Tracking data (sales order & work order) into designated log for finished units.- Packing prepped machines into final packaging, securing shipping straps, and placing on final shipping pallet.- Any other tasks as assigned by supervisor or manager.Working hours: 7:00 AM - 3:30 PMSkills:- PC fluent and tech friendly- Ability to use hand toolsEducation:High SchoolExperience:0-1 yearsQualifications:- Good communication skills- Ability to work in a physically demanding. Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client is seeking a Material Handler/Packer to work in their warehouse. Apply today and feel free to reach out directly if you have any questions.Responsibilities:- Mounting of cabinets and vaults to pallets and placing them on designated skids.- Mounting of hoods onto cabinets and vaults.- Delivering cabinets and vaults to respective lines.- Producing foam packing inserts by mounting designated mold to platform, lining mold with proper film, injection foam into lined mold, curing, removing and placing formed insert into proper transfer cart.- Prepping finished units, and mechs, for final packaging.- Tracking data (sales order & work order) into designated log for finished units.- Packing prepped machines into final packaging, securing shipping straps, and placing on final shipping pallet.- Any other tasks as assigned by supervisor or manager.Working hours: 7:00 AM - 3:30 PMSkills:- PC fluent and tech friendly- Ability to use hand toolsEducation:High SchoolExperience:0-1 yearsQualifications:- Good communication skills- Ability to work in a physically demanding. Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $14.00 per hour
      • 6:00 AM - 2:30 PM
      The Lacquer Spray Machine (L.S.M.) Cleaners are in charge of maintaining the cleanliness of the machines.Responsibilities:Daily machine cleaning: All 12 machines to be done daily. Each machine should take approximately 20 min. All required personal protective equipment to be worn at all times.1.Shut machine down and apply the correct lockout/tagout on both electrical disconnects.2.Remove dirty cardboard chutes and dispose of properly.3.Using a putty knife, scrape off all excess lacquer from the front of the turrets and other main areas of the machine. More specific instructions given during training.4.Using paper towels, wipe down the remaining areas of the turrets, spray gun nozzles, and all other areas as needed.5.Install new cardboard chutes.6.Apply a thin film of the appropriate grease to all areas as directed in training.7.May be required to assist with other miscellaneous tasks in the plant. Generally some type of cleaning duties, but may vary depending on need.Working hours: 6:00 AM - 2:30 PMSkills:Good time management skills Work well with others MotivatedEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma SAFETY:Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Lacquer Spray Machine (L.S.M.) Cleaners are in charge of maintaining the cleanliness of the machines.Responsibilities:Daily machine cleaning: All 12 machines to be done daily. Each machine should take approximately 20 min. All required personal protective equipment to be worn at all times.1.Shut machine down and apply the correct lockout/tagout on both electrical disconnects.2.Remove dirty cardboard chutes and dispose of properly.3.Using a putty knife, scrape off all excess lacquer from the front of the turrets and other main areas of the machine. More specific instructions given during training.4.Using paper towels, wipe down the remaining areas of the turrets, spray gun nozzles, and all other areas as needed.5.Install new cardboard chutes.6.Apply a thin film of the appropriate grease to all areas as directed in training.7.May be required to assist with other miscellaneous tasks in the plant. Generally some type of cleaning duties, but may vary depending on need.Working hours: 6:00 AM - 2:30 PMSkills:Good time management skills Work well with others MotivatedEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma SAFETY:Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Broken Arrow, Oklahoma
      • Temp to Perm
      • $15.00 - $17.00 per hour
      • 8:00 AM - 8:00 PM
      Love. Kindness. Integrity. Compassion. These are the cornerstones of our client's culture. This thriving company is located in Broken Arrow where it laid down roots 30 years ago. Since then, they've grown to open multiple locations in the U.S. where they produce product on state-of-the-art equipment. If you are looking for a work family and career that believes in "safety first", and allows you to grow and share new ideas, this is the home for you!This is a 90-day temp-to-permanent position. Dependable and hard-working employees will have the opportunity to be converted to permanent status earlier than 90-days. Medical, dental, and vision benefits are offered once workers are hired on. Extra pay is available for employees willing to work during the holidays.Swing Shift: 8 am to 8 pm on days one month; 8 pm to 8 am nights the next month; 2 on, 2 off, 3 on, 2 off, 2 on and 3 offPay: $15-$16/hour ($16-$17/hr with perfect attendance)The Line Operator III/IV demonstrates and provides leadership to the production floor combined with an advanced level of knowledge and understanding of the extrusion process and film performance. This role is responsible for ensuring the production line is operating properly in order to meet standards both in quality and production goals while helping to ensure safety standards are maintained. Position demonstrates leadership and engages in training as a Senior Operator. Line Operator III/IV must be knowledgeable in and follow all procedures needed to ensure the proper safe and efficient operation of their production line.Responsibilities:- Monitors schedules and makes preparations for line changeovers and effectively performs screen changes when required- Pulls rolls, properly labels, and packages product that meet established quality standards- Monitors line computers and is able to recognize any wrong or dangerous conditions- Pulls all QA tests and monitors results to ensure quality product is being produced, communicates any quality issues- Further trains in Quality by performing tasks in the lab including researching, testing, and processing rolls with guidance from management to ensure quality standards are being met- Maintains calibration of test equipment based on schedule and assists outside vendors in the quality lab- Stays current and up to date on machinery for production set up and troubleshoots for a variety of issues on assigned line, performs troubleshooting in order to maintain production efforts, fine-tunes equipment- Maintains advanced knowledge of film performance and product lines- Completes all shift and line reports in a timely manner- Other duties as requested or assigned by managementWorking hours: 8:00 AM - 8:00 PMSkills:- Technical aptitude to understand machinery and systems within a production environment- Mechanical aptitude to understand and properly utilize basic hand tools with accuracy- Completes all shift and line reports in a timely manner- Ability to understand and properly utilize scales, weights, and other measurement tools with accuracy- Ability to demonstrate sound judgement while adapting to fast-paced environment and rapid changes- Able to juggle multiple tasks and handle unexpected delays or events while maintaining constant attention to detail- Strong organizational skills combined with good problem-solving skills- Practice and promote teamwork within our organization- Demonstrates leadership qualities and capabilities- Ability to climb onto elevated surfaces off the ground, railcars, silos, utilize ladders, stairs, step stools, and other equipment necessary while following all applicable safety rules and guidelinesEducation:High SchoolExperience:4-7 yearsQualifications:- High level of dependability regarding attendance and punctuality- Excellent verbal and written communication skills- Basic mathematic skills- Ability to pass a background and drug screen- Longevity in previous positions- High School diploma or equivalent- Previous experience in a plastics manufacturing environment Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Love. Kindness. Integrity. Compassion. These are the cornerstones of our client's culture. This thriving company is located in Broken Arrow where it laid down roots 30 years ago. Since then, they've grown to open multiple locations in the U.S. where they produce product on state-of-the-art equipment. If you are looking for a work family and career that believes in "safety first", and allows you to grow and share new ideas, this is the home for you!This is a 90-day temp-to-permanent position. Dependable and hard-working employees will have the opportunity to be converted to permanent status earlier than 90-days. Medical, dental, and vision benefits are offered once workers are hired on. Extra pay is available for employees willing to work during the holidays.Swing Shift: 8 am to 8 pm on days one month; 8 pm to 8 am nights the next month; 2 on, 2 off, 3 on, 2 off, 2 on and 3 offPay: $15-$16/hour ($16-$17/hr with perfect attendance)The Line Operator III/IV demonstrates and provides leadership to the production floor combined with an advanced level of knowledge and understanding of the extrusion process and film performance. This role is responsible for ensuring the production line is operating properly in order to meet standards both in quality and production goals while helping to ensure safety standards are maintained. Position demonstrates leadership and engages in training as a Senior Operator. Line Operator III/IV must be knowledgeable in and follow all procedures needed to ensure the proper safe and efficient operation of their production line.Responsibilities:- Monitors schedules and makes preparations for line changeovers and effectively performs screen changes when required- Pulls rolls, properly labels, and packages product that meet established quality standards- Monitors line computers and is able to recognize any wrong or dangerous conditions- Pulls all QA tests and monitors results to ensure quality product is being produced, communicates any quality issues- Further trains in Quality by performing tasks in the lab including researching, testing, and processing rolls with guidance from management to ensure quality standards are being met- Maintains calibration of test equipment based on schedule and assists outside vendors in the quality lab- Stays current and up to date on machinery for production set up and troubleshoots for a variety of issues on assigned line, performs troubleshooting in order to maintain production efforts, fine-tunes equipment- Maintains advanced knowledge of film performance and product lines- Completes all shift and line reports in a timely manner- Other duties as requested or assigned by managementWorking hours: 8:00 AM - 8:00 PMSkills:- Technical aptitude to understand machinery and systems within a production environment- Mechanical aptitude to understand and properly utilize basic hand tools with accuracy- Completes all shift and line reports in a timely manner- Ability to understand and properly utilize scales, weights, and other measurement tools with accuracy- Ability to demonstrate sound judgement while adapting to fast-paced environment and rapid changes- Able to juggle multiple tasks and handle unexpected delays or events while maintaining constant attention to detail- Strong organizational skills combined with good problem-solving skills- Practice and promote teamwork within our organization- Demonstrates leadership qualities and capabilities- Ability to climb onto elevated surfaces off the ground, railcars, silos, utilize ladders, stairs, step stools, and other equipment necessary while following all applicable safety rules and guidelinesEducation:High SchoolExperience:4-7 yearsQualifications:- High level of dependability regarding attendance and punctuality- Excellent verbal and written communication skills- Basic mathematic skills- Ability to pass a background and drug screen- Longevity in previous positions- High School diploma or equivalent- Previous experience in a plastics manufacturing environment Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Long Beach, Mississippi
      • Temp to Perm
      • $11.00 per hour
      • 7:00 AM - 3:00 PM
      Our client is seeking a Material Handler/Packer to work in their warehouse. Apply today and feel free to reach out directly if you have any questions.Responsibilities:- Mounting of cabinets and vaults to pallets and placing them on designated skids.- Mounting of hoods onto cabinets and vaults.- Delivering cabinets and vaults to respective lines.- Producing foam packing inserts by mounting designated mold to platform, lining mold with proper film, injection foam into lined mold, curing, removing and placing formed insert into proper transfer cart.- Prepping finished units, and mechs, for final packaging.- Tracking data (sales order & work order) into designated log for finished units.- Packing prepped machines into final packaging, securing shipping straps, and placing on final shipping pallet.- Any other tasks as assigned by supervisor or manager.Working hours: 7:00 AM - 3:00 PMSkills:- PC fluent and tech friendly- Ability to use hand tools- Forklift experienced and adeptEducation:High SchoolExperience:0-1 yearsQualifications:- Good communication skills- Ability to work in a physically demanding environment- Forklift Experienced Feel to reach out directly if you have any questions: 228-818-9191. Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client is seeking a Material Handler/Packer to work in their warehouse. Apply today and feel free to reach out directly if you have any questions.Responsibilities:- Mounting of cabinets and vaults to pallets and placing them on designated skids.- Mounting of hoods onto cabinets and vaults.- Delivering cabinets and vaults to respective lines.- Producing foam packing inserts by mounting designated mold to platform, lining mold with proper film, injection foam into lined mold, curing, removing and placing formed insert into proper transfer cart.- Prepping finished units, and mechs, for final packaging.- Tracking data (sales order & work order) into designated log for finished units.- Packing prepped machines into final packaging, securing shipping straps, and placing on final shipping pallet.- Any other tasks as assigned by supervisor or manager.Working hours: 7:00 AM - 3:00 PMSkills:- PC fluent and tech friendly- Ability to use hand tools- Forklift experienced and adeptEducation:High SchoolExperience:0-1 yearsQualifications:- Good communication skills- Ability to work in a physically demanding environment- Forklift Experienced Feel to reach out directly if you have any questions: 228-818-9191. Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Springville, Utah
      • Permanent
      • $20.41 per hour
      • Various Shifts Available
      NOW OFFERING A $2000 for direct hire candidates! This job offers STABILITY with NUMEROUS career advancement opportunities with a reputable company who offers phenomenal benefits with lots of overtime. This is a manufacturing environment. If you have previous experience as a laborer, warehouse worker, production worker, machine operator, assembly line worker, or even if you have previously worked for Amazon, this could be a great fit for you.Responsibilities:- Checks all issued ingredients for quality and quantity- Follows recipe in preparing ingredients.- Labels ingredients and completes all paperwork.- Prepares product for weighers and operators. Weighs products when necessary.- Maintains adequate supply of ingredients, film, and pictorials to keep all aspects of operations functioning at maximum capacity.- Ensures proper rotation sequence of ingredients, pans,- Understands and follows all mid-shift and end of shift procedures regarding food storage, WIP, paperwork, housekeeping, etc.- Hand loads, tapes, and stacks cases, ensuring accurate stamping and quality of code.- Sorts sub-standard product out and maintains appearance of product for later inspection.- Watches for foreign matter in product and notifies Team Leader or QA when foreign material is present.- Weighs products at or above minimum speed consistently and accurately.- Keeps prepweigher stations, etc. adequately supplied to avoid line downtime.- Meets requirement of obtaining at least one back-up on the core line within 30 days of accepting General Production position.- Performs all other duties as assigned by Team Leader.Working hours: Various Shifts AvailableSkills:- Must be able and willing to lift, bend, pull, etc. heavy commodities and equipment repeatedly for a 10 hr shift.- Basic computer data entry is required- Work overtime as neededEducation:No Degree RequiredExperience:1-4 yearsQualifications:Be able to pass a background check and drug screen prior to start date. We have 20 openings for swing shift! Swing shift typically starts between 2 and 5 pm and goes for 10 hours. Apply and interview TODAY! Call for more information at (385) 448-2466.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      NOW OFFERING A $2000 for direct hire candidates! This job offers STABILITY with NUMEROUS career advancement opportunities with a reputable company who offers phenomenal benefits with lots of overtime. This is a manufacturing environment. If you have previous experience as a laborer, warehouse worker, production worker, machine operator, assembly line worker, or even if you have previously worked for Amazon, this could be a great fit for you.Responsibilities:- Checks all issued ingredients for quality and quantity- Follows recipe in preparing ingredients.- Labels ingredients and completes all paperwork.- Prepares product for weighers and operators. Weighs products when necessary.- Maintains adequate supply of ingredients, film, and pictorials to keep all aspects of operations functioning at maximum capacity.- Ensures proper rotation sequence of ingredients, pans,- Understands and follows all mid-shift and end of shift procedures regarding food storage, WIP, paperwork, housekeeping, etc.- Hand loads, tapes, and stacks cases, ensuring accurate stamping and quality of code.- Sorts sub-standard product out and maintains appearance of product for later inspection.- Watches for foreign matter in product and notifies Team Leader or QA when foreign material is present.- Weighs products at or above minimum speed consistently and accurately.- Keeps prepweigher stations, etc. adequately supplied to avoid line downtime.- Meets requirement of obtaining at least one back-up on the core line within 30 days of accepting General Production position.- Performs all other duties as assigned by Team Leader.Working hours: Various Shifts AvailableSkills:- Must be able and willing to lift, bend, pull, etc. heavy commodities and equipment repeatedly for a 10 hr shift.- Basic computer data entry is required- Work overtime as neededEducation:No Degree RequiredExperience:1-4 yearsQualifications:Be able to pass a background check and drug screen prior to start date. We have 20 openings for swing shift! Swing shift typically starts between 2 and 5 pm and goes for 10 hours. Apply and interview TODAY! Call for more information at (385) 448-2466.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Boise, Idaho
      • Temp to Perm
      • $14.15 per hour
      • 3:00 PM - 12:00 AM
      We are seeking people to join our production team to inspect and package finished goods in designated boxes according to Quality spec sheets, customer specifications and company policies.Responsibilities:- Inspect the finished goods for proper size, adequate coating of product, check for product that does not meet company standards. Ensure the packages are properly coded. Make sure labels and film are centered on the finished packages. Communicate quality and equipment problems with both your Line Leader and Supervisor.- Responsible for discarding waste in the designated garbage bins.- Responsible for packaging finished goods in properly labeled boxes, maintains packing rate that is consistent with the line speed and minimizes product losses through proper handling.- Responsible for the proper set-up of the packing area, including reports. Ensures the use of the correct packaging, labels and codes. Minimize over packing by maintaining count for each individual case of product and minimize the amount of waste falling to the floor.- Package product at a rate consistent with the line speed. Ensure packaged product is properly closed. Sort out those materials that are sub-standard per quality specifications. Clear case sealer when stops occur. Maintain an accurate supply of tape for the case sealer. If necessary, fill preformed boxes with plastic lining.Working hours: 3:00 PM - 12:00 AMSkills:- Work area will be maintained in a safe and clean environment at all times.- When the line is down, seek further direction from your Line Leader or Supervisor as to what you can do to stay productive.- You must be able to rotate through four positions (catching, weighing, packaging and inspecting) at the standards set by each line.Education:No Degree RequiredExperience:0-1 yearsQualifications:- Follows and complies with all universal job qualifications.- Follows all established Good Manufacturing Practices. Please call or text 208-514-2044 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are seeking people to join our production team to inspect and package finished goods in designated boxes according to Quality spec sheets, customer specifications and company policies.Responsibilities:- Inspect the finished goods for proper size, adequate coating of product, check for product that does not meet company standards. Ensure the packages are properly coded. Make sure labels and film are centered on the finished packages. Communicate quality and equipment problems with both your Line Leader and Supervisor.- Responsible for discarding waste in the designated garbage bins.- Responsible for packaging finished goods in properly labeled boxes, maintains packing rate that is consistent with the line speed and minimizes product losses through proper handling.- Responsible for the proper set-up of the packing area, including reports. Ensures the use of the correct packaging, labels and codes. Minimize over packing by maintaining count for each individual case of product and minimize the amount of waste falling to the floor.- Package product at a rate consistent with the line speed. Ensure packaged product is properly closed. Sort out those materials that are sub-standard per quality specifications. Clear case sealer when stops occur. Maintain an accurate supply of tape for the case sealer. If necessary, fill preformed boxes with plastic lining.Working hours: 3:00 PM - 12:00 AMSkills:- Work area will be maintained in a safe and clean environment at all times.- When the line is down, seek further direction from your Line Leader or Supervisor as to what you can do to stay productive.- You must be able to rotate through four positions (catching, weighing, packaging and inspecting) at the standards set by each line.Education:No Degree RequiredExperience:0-1 yearsQualifications:- Follows and complies with all universal job qualifications.- Follows all established Good Manufacturing Practices. Please call or text 208-514-2044 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Broken Arrow, Oklahoma
      • Temp to Perm
      • $13.00 - $13.80 per hour
      • 8:00 AM - 8:00 PM
      Love. Kindness. Integrity. Compassion. These are the cornerstones of our client's culture. This thriving company is located in Broken Arrow where it laid down roots 30 years ago. Since then, they've grown to open multiple locations in the U.S. where they produce product on state of the art equipment. If you are looking for a work family and career that believes in "safety first", and allows you to grow and share new ideas, this is the home for you!This is a 90-day temp to permanent position. Dependable and hard-working employees will have the opportunity to be converted to permanent status earlier than 90-days. Medical, dental, and vision benefits are offered once workers are hired on. Extra pay is available for employees willing to work during the holidays.Swing Shift: 8 to 8 days one month; nights the next; 2 on, 2 off, 3 on, 2 off, 2 on and 3 offPay: $13/hour (with perfect attendance); Differential available upon permanent placement - $13.30 (day shift) / $13.80 (night shift)Responsibilities:The Extrusion Assistant Tech is responsible for basic operations of the extrusion lines, packaging, labeling, and quality of product the lines generate.- Pulls, trims, lifts, and loads finished product- Threads lines- Cuts and accurately weighs, reports and discards scrap- Reads and interprets set up sheets- Wraps completed pallet trays with stretch film to prepare for shipping- Pulls pallets from pallet stacks- Assists with ensuring line operates continuously, notifying Sr. Operator or Team Manager of any issues- Operates manual or electric pallet jacks- Completes QC paperwork accurately following established standardsWorking hours: 8:00 AM - 8:00 PMSkills:- Ability to demonstrate sound judgment and attention to detail in a fast-paced environment- Strong organizational skills combined with good problem-solving skills- Collaboration and team attitude- Basic mathematics skillsEducation:High SchoolExperience:1-4 yearsQualifications:-Dependability and punctuality- Ability to lift a minimum of 65 lbs. on a continual basis for a 12-hour shift (with another team member assisting)- Ability to climb onto machinery and rolling staircases while following all applicable safety rules and guidelines- Previous experience in a plastics manufacturing environment is preferred- Ability to pass a drug screen and background check- High School/Equiv If you are in the market for a long term career, we have found the perfect position for you! Apply today! You may also call the office for additional information. 918/971-5900Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Love. Kindness. Integrity. Compassion. These are the cornerstones of our client's culture. This thriving company is located in Broken Arrow where it laid down roots 30 years ago. Since then, they've grown to open multiple locations in the U.S. where they produce product on state of the art equipment. If you are looking for a work family and career that believes in "safety first", and allows you to grow and share new ideas, this is the home for you!This is a 90-day temp to permanent position. Dependable and hard-working employees will have the opportunity to be converted to permanent status earlier than 90-days. Medical, dental, and vision benefits are offered once workers are hired on. Extra pay is available for employees willing to work during the holidays.Swing Shift: 8 to 8 days one month; nights the next; 2 on, 2 off, 3 on, 2 off, 2 on and 3 offPay: $13/hour (with perfect attendance); Differential available upon permanent placement - $13.30 (day shift) / $13.80 (night shift)Responsibilities:The Extrusion Assistant Tech is responsible for basic operations of the extrusion lines, packaging, labeling, and quality of product the lines generate.- Pulls, trims, lifts, and loads finished product- Threads lines- Cuts and accurately weighs, reports and discards scrap- Reads and interprets set up sheets- Wraps completed pallet trays with stretch film to prepare for shipping- Pulls pallets from pallet stacks- Assists with ensuring line operates continuously, notifying Sr. Operator or Team Manager of any issues- Operates manual or electric pallet jacks- Completes QC paperwork accurately following established standardsWorking hours: 8:00 AM - 8:00 PMSkills:- Ability to demonstrate sound judgment and attention to detail in a fast-paced environment- Strong organizational skills combined with good problem-solving skills- Collaboration and team attitude- Basic mathematics skillsEducation:High SchoolExperience:1-4 yearsQualifications:-Dependability and punctuality- Ability to lift a minimum of 65 lbs. on a continual basis for a 12-hour shift (with another team member assisting)- Ability to climb onto machinery and rolling staircases while following all applicable safety rules and guidelines- Previous experience in a plastics manufacturing environment is preferred- Ability to pass a drug screen and background check- High School/Equiv If you are in the market for a long term career, we have found the perfect position for you! Apply today! You may also call the office for additional information. 918/971-5900Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.