You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    4 jobs found for Maintenance in Faribault, Minnesota

    Filter4
    Clear all
      • Owatonna, Minnesota
      • Temp to Perm
      • $20.95 per hour
      • 6:00 PM - 6:00 AM
      Work for an outstanding, reputable company in Owatonna, MN as a Machine Operator/Maintenance Mechanic. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off) - Work 6 months out of the year!***Direct Hire OpportunityTotal Compensation Package upon full time employment with the company:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and holidays-Comprehensive healthcare where company pays 100% of the cost for employee coverage.-401K with company match, active Pension Plan and Stock Purchase Plan-Company paid life insurance and short-term disability with optional long-term disabilityPurpose:The Machine Operator is responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.Responsibilities:-The Industrial Mechanic/Machine Operator will inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.-Set-up, maintenance and machine operation of the upender, unwinder, lubricator, and cupping press.-Set-up maintenance and machine operation of the body makers, trimmers, and conveying systems.-Inspect and monitor, then enter into computer the following can specifications:-flange wall thickness - mid-wall thickness - dome depth - trim can height-The machine operator will perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.-Assist in other areas as needed to maintain smooth can flow through the plant.-Complete required paperwork and documentation such as coil log, check sheets, etc.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Performs other job-related duties as required or assigned.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical AptitudeEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Knowledge in pneumatics, hydraulics-Knowledge using micrometers, calipers-Mechanical knowledge-Previous experience in machine operating Start your career today! Apply now! Urgently hiring.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for an outstanding, reputable company in Owatonna, MN as a Machine Operator/Maintenance Mechanic. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off) - Work 6 months out of the year!***Direct Hire OpportunityTotal Compensation Package upon full time employment with the company:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and holidays-Comprehensive healthcare where company pays 100% of the cost for employee coverage.-401K with company match, active Pension Plan and Stock Purchase Plan-Company paid life insurance and short-term disability with optional long-term disabilityPurpose:The Machine Operator is responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.Responsibilities:-The Industrial Mechanic/Machine Operator will inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.-Set-up, maintenance and machine operation of the upender, unwinder, lubricator, and cupping press.-Set-up maintenance and machine operation of the body makers, trimmers, and conveying systems.-Inspect and monitor, then enter into computer the following can specifications:-flange wall thickness - mid-wall thickness - dome depth - trim can height-The machine operator will perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.-Assist in other areas as needed to maintain smooth can flow through the plant.-Complete required paperwork and documentation such as coil log, check sheets, etc.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Performs other job-related duties as required or assigned.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical AptitudeEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Knowledge in pneumatics, hydraulics-Knowledge using micrometers, calipers-Mechanical knowledge-Previous experience in machine operating Start your career today! Apply now! Urgently hiring.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $18.27 per hour
      • 6:00 PM - 6:00 AM
      Work for a great, reputable company in Owatonna, MN. Full benefit package upon direct hire with the company. WEEKLY PAY! The Lacquer Spray Machine (L.S.M.) Operators are responsible for the application of the lacquer spray coating to the inside of the can in compliance with quality control specifications. They have primary control of the processing of cans from the point of feeding of cans into the conveying above the spray machines, until they reach the Internal Bake Ovens.6PM - 6AM. Work 4 days on, have 4 days off. Work 6 months out of the year! Apply today!Responsibilities:-Clearing can jams from Lacquer Spray Machines and from upper conveyors.-Check and monitor the following: Clean canworks, Overall quality of cans, Lacquer pressure of machines, Temperature of lacquer, Copper sulfate checks on flanges.-Monitor, measure and enter into the computer the following data: Metal exposure of cans, weight of lacquer inside the cans, film weight distribution -Maintain cleanliness of machines including the spray nozzles, turrent wheels, lacquer overspray boxes, machine exterior and general work area. Follow all safety procedures and PPE requirements.-Perform routine maintenance including the setting of guns, nozzles, can guides and spray delay.-Perform preventative maintenance which includes the replacement of drive and conveyor belts to the oven, tips, rails, guns, lacquer and vacuum filters.-Follow proper material handling procedures, which includes proper disposal of waste lacquer and labeling of waste barrels.-Perform Equipment Set-up Evaluations (ESE) on LSMs after adjustment or changes are made.-Monitor and assist other production processes on the Back End to ensure a constant flow of cans into and through the LSM process.-Other duties as required.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical aptitudeEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Basic computer skills to perform data entry.-Basic mechanical skills-Basic machine operating skills Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a great, reputable company in Owatonna, MN. Full benefit package upon direct hire with the company. WEEKLY PAY! The Lacquer Spray Machine (L.S.M.) Operators are responsible for the application of the lacquer spray coating to the inside of the can in compliance with quality control specifications. They have primary control of the processing of cans from the point of feeding of cans into the conveying above the spray machines, until they reach the Internal Bake Ovens.6PM - 6AM. Work 4 days on, have 4 days off. Work 6 months out of the year! Apply today!Responsibilities:-Clearing can jams from Lacquer Spray Machines and from upper conveyors.-Check and monitor the following: Clean canworks, Overall quality of cans, Lacquer pressure of machines, Temperature of lacquer, Copper sulfate checks on flanges.-Monitor, measure and enter into the computer the following data: Metal exposure of cans, weight of lacquer inside the cans, film weight distribution -Maintain cleanliness of machines including the spray nozzles, turrent wheels, lacquer overspray boxes, machine exterior and general work area. Follow all safety procedures and PPE requirements.-Perform routine maintenance including the setting of guns, nozzles, can guides and spray delay.-Perform preventative maintenance which includes the replacement of drive and conveyor belts to the oven, tips, rails, guns, lacquer and vacuum filters.-Follow proper material handling procedures, which includes proper disposal of waste lacquer and labeling of waste barrels.-Perform Equipment Set-up Evaluations (ESE) on LSMs after adjustment or changes are made.-Monitor and assist other production processes on the Back End to ensure a constant flow of cans into and through the LSM process.-Other duties as required.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical aptitudeEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Basic computer skills to perform data entry.-Basic mechanical skills-Basic machine operating skills Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $17.08 per hour
      • 6:00 AM - 2:30 PM (Various Shifts Available)
      POSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PM (Various Shifts Available)Skills:-Previous work in a manufacturing environment preferred but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.-Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently and stand, twist, bend and rotate continuously. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      POSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PM (Various Shifts Available)Skills:-Previous work in a manufacturing environment preferred but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.-Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently and stand, twist, bend and rotate continuously. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $17.58 per hour
      • 2:30 PM - 11:00 PM (Various Shifts Available)
      A local, reputable company in Owatonna, MN is looking for an entry level production worker. This position is an 8 hour shift. Job Purpose: To safely ensure that all production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:30 PM - 11:00 PM (Various Shifts Available)Skills:-Entry level production-Attention to detailEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to stand your entire shift and lift 8.5 pounds-Stand, bend, twist, rotate continuously Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A local, reputable company in Owatonna, MN is looking for an entry level production worker. This position is an 8 hour shift. Job Purpose: To safely ensure that all production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:30 PM - 11:00 PM (Various Shifts Available)Skills:-Entry level production-Attention to detailEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to stand your entire shift and lift 8.5 pounds-Stand, bend, twist, rotate continuously Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    Explore over 4 jobs in Faribault

    It looks like you want to switch your language. This will reset your filters on your current job search.