You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    142 jobs found for Maintenance

    Filter2
    Clear all
      • Detroit Lakes, Minnesota
      • Permanent
      • $20.10 per hour
      • 7:00 AM - 3:30 PM
      Are you ready to take your maintenance skills to the next level? Spherion Staffing is currently seeking a maintenance technician to work for a growing company in Detroit Lakes, MN.Responsibilities:- Knowledgeable in all aspects of equipment maintenance- Knowledgeable in computers, wiring, programming, robotics, electrical work- Perform preventative maintenance on all plant equipment to ensure maximum productivity- Work with operations to ensure plant equipment is operating when necessary, through diagnosis, troubleshooting, and repairWorking hours: 7:00 AM - 3:30 PMSkills:- Maintenance aptitude- Mathematical skillsEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to work in a safe manner and follow all safety policies and procedures- Meet quality standards by demonstrating accuracy and thoroughness- Ability to work well with other team members, vendors, and customers To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you ready to take your maintenance skills to the next level? Spherion Staffing is currently seeking a maintenance technician to work for a growing company in Detroit Lakes, MN.Responsibilities:- Knowledgeable in all aspects of equipment maintenance- Knowledgeable in computers, wiring, programming, robotics, electrical work- Perform preventative maintenance on all plant equipment to ensure maximum productivity- Work with operations to ensure plant equipment is operating when necessary, through diagnosis, troubleshooting, and repairWorking hours: 7:00 AM - 3:30 PMSkills:- Maintenance aptitude- Mathematical skillsEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to work in a safe manner and follow all safety policies and procedures- Meet quality standards by demonstrating accuracy and thoroughness- Ability to work well with other team members, vendors, and customers To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Brenham, Texas
      • Temp to Perm
      • $13.00 - $15.00 per hour
      • 6:00 AM - 7:00 PM
      Spherion Staffing is looking for a mechanic to repair and maintain machinery for a manufacturing company in the Brenham, TX area.Responsibilities:Analyzes mechanical and operational problems.Maintain maximum production and quality.Reviews production schedule.Monitors machines during production hours and run cycles.Tests equipment following repairs and maintenance.Schedules preventative maintenance checks.Keep up with inventory for machines.Report and provide feedback to Maintenance Supervisor.Maintain and enforce SOPs.Support a team oriented environment.Comply with company procedures and processes.Working hours: 6:00 AM - 7:00 PMSkills:Excellent mechanical skills.Strong work ethic and ability to prioritize.Team player.Very punctual.Able to keep work environment clean and organized.Education:High SchoolExperience:1-4 yearsQualifications:Previous experience in a maintenance role.High School diploma or equivalent. Apply nowSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for a mechanic to repair and maintain machinery for a manufacturing company in the Brenham, TX area.Responsibilities:Analyzes mechanical and operational problems.Maintain maximum production and quality.Reviews production schedule.Monitors machines during production hours and run cycles.Tests equipment following repairs and maintenance.Schedules preventative maintenance checks.Keep up with inventory for machines.Report and provide feedback to Maintenance Supervisor.Maintain and enforce SOPs.Support a team oriented environment.Comply with company procedures and processes.Working hours: 6:00 AM - 7:00 PMSkills:Excellent mechanical skills.Strong work ethic and ability to prioritize.Team player.Very punctual.Able to keep work environment clean and organized.Education:High SchoolExperience:1-4 yearsQualifications:Previous experience in a maintenance role.High School diploma or equivalent. Apply nowSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • McGregor, Texas
      • Permanent
      • $25.00 - $30.00 per hour
      • 8:30 AM - 5:00 PM
      The Maintenance Technician 2 is responsible for the maintenance of machinery and auxiliary equipment. He/ She will engage in the repair of automated computerized machine controls, and repair and maintain machines, equipment, buildings and grounds.Responsibilities:Makes major electrical, mechanical, and construction repairs and installation involving schematics and/or blueprint interpretation.Troubleshoots drive related issues to component level of controllers.Determines root cause of failures and recommends preventive actions. Communicates same through work order system comments/history.Communicates consistently with internal customers regarding status of equipment in shop.Advises supervisor of needs for outside services and works with service representatives on equipment and controls repair and installation. Shows competency in several crafts and performs handyman aspects in all trades.Constructs sketches of mechanical or construction alterations/installations and electrical circuitry.Prepares bills of material on jobs requiring major material use and initiates purchase requisitions.Makes day to day work-related decisions.Uses various material handling equipment such as hoists, carts, lifts, fork trucks and hand trucks in moving light to heavy weight material.Uses a variety of lock-out/tag-out devices as required per plant LOTO Plan.Working hours: 8:30 AM - 5:00 PMSkills:PLC EXPERIENCE IS A MUSTHigh School Diploma or GED equivalent required.Strong mechanical and electrical skills.Comprehension of schematics/blueprints.Knowledge of Hydraulic/pneumatic systems desirable.Self-starter and motivated to maintain building/machines to 100% uptime via strong preventative activities.Willingness to change, flex and learn, Self-motivated, work pride, Innovative, Customer focused, Critical thinkingTeamworkMechanical Aptitude, Computer Skills and Standard Work AdherenceEducation:High SchoolExperience:1-4 yearsQualifications:PLC EXPERIENCE IS A MUSTDegree in Industrial Maintenance Technology or equivalent preferred.Experience with Industrial Machinery preferred.Three (3) plus years of experience in Maintenance is preferred. This is a DIRECT HIRE opportunity, not a temp-to-hire.  We are currently sourcing candidates directly for a manufacturing client of ours in McGregor.  If selected, you will be an employee of our client from the start.  If insterested, please apply online at www.spherion.com/apply and when asked to choose an office, choose: TX 75064 WACO then send your resume to solmelton@spherion.com to let me know you've completed your application.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Maintenance Technician 2 is responsible for the maintenance of machinery and auxiliary equipment. He/ She will engage in the repair of automated computerized machine controls, and repair and maintain machines, equipment, buildings and grounds.Responsibilities:Makes major electrical, mechanical, and construction repairs and installation involving schematics and/or blueprint interpretation.Troubleshoots drive related issues to component level of controllers.Determines root cause of failures and recommends preventive actions. Communicates same through work order system comments/history.Communicates consistently with internal customers regarding status of equipment in shop.Advises supervisor of needs for outside services and works with service representatives on equipment and controls repair and installation. Shows competency in several crafts and performs handyman aspects in all trades.Constructs sketches of mechanical or construction alterations/installations and electrical circuitry.Prepares bills of material on jobs requiring major material use and initiates purchase requisitions.Makes day to day work-related decisions.Uses various material handling equipment such as hoists, carts, lifts, fork trucks and hand trucks in moving light to heavy weight material.Uses a variety of lock-out/tag-out devices as required per plant LOTO Plan.Working hours: 8:30 AM - 5:00 PMSkills:PLC EXPERIENCE IS A MUSTHigh School Diploma or GED equivalent required.Strong mechanical and electrical skills.Comprehension of schematics/blueprints.Knowledge of Hydraulic/pneumatic systems desirable.Self-starter and motivated to maintain building/machines to 100% uptime via strong preventative activities.Willingness to change, flex and learn, Self-motivated, work pride, Innovative, Customer focused, Critical thinkingTeamworkMechanical Aptitude, Computer Skills and Standard Work AdherenceEducation:High SchoolExperience:1-4 yearsQualifications:PLC EXPERIENCE IS A MUSTDegree in Industrial Maintenance Technology or equivalent preferred.Experience with Industrial Machinery preferred.Three (3) plus years of experience in Maintenance is preferred. This is a DIRECT HIRE opportunity, not a temp-to-hire.  We are currently sourcing candidates directly for a manufacturing client of ours in McGregor.  If selected, you will be an employee of our client from the start.  If insterested, please apply online at www.spherion.com/apply and when asked to choose an office, choose: TX 75064 WACO then send your resume to solmelton@spherion.com to let me know you've completed your application.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Brenham, Texas
      • Temp to Perm
      • $13.00 - $15.00 per hour
      • 6:00 AM - 7:00 PM
      Spherion Staffing is looking for a mechanic to repair and maintain machinery for a manufacturing company in the Brenham, TX area.Responsibilities:Analyzes mechanical and operational problems.Maintain maximum production and quality.Reviews production schedule.Monitors machines during production hours and run cycles.Tests equipment following repairs and maintenance.Schedules preventative maintenance checks.Keep up with inventory for machines.Report and provide feedback to Maintenance Supervisor.Maintain and enforce SOPs.Support a team oriented environment.Comply with company procedures and processes.Working hours: 6:00 AM - 7:00 PMSkills:Excellent mechanical skills.Strong work ethic and ability to prioritize.Team player.Very punctual.Able to keep work environment clean and organized.Education:High SchoolExperience:1-4 yearsQualifications:Previous experience in a maintenance role.High School diploma or equivalent. Apply nowSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for a mechanic to repair and maintain machinery for a manufacturing company in the Brenham, TX area.Responsibilities:Analyzes mechanical and operational problems.Maintain maximum production and quality.Reviews production schedule.Monitors machines during production hours and run cycles.Tests equipment following repairs and maintenance.Schedules preventative maintenance checks.Keep up with inventory for machines.Report and provide feedback to Maintenance Supervisor.Maintain and enforce SOPs.Support a team oriented environment.Comply with company procedures and processes.Working hours: 6:00 AM - 7:00 PMSkills:Excellent mechanical skills.Strong work ethic and ability to prioritize.Team player.Very punctual.Able to keep work environment clean and organized.Education:High SchoolExperience:1-4 yearsQualifications:Previous experience in a maintenance role.High School diploma or equivalent. Apply nowSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Winchester, Virginia
      • Temporary
      • $21.00 - $25.00 per hour
      • Various Shifts Available
      $21 + DOEvarious shifts:12 hours - days/nights6a-4p tues-friResponsibilities:Performs any combination of tasks needed to maintain machinery, plumbing, & other physical structures of the facility. Observes & checks mechanical devices through preventative maintenance practices to locate repair or recommend repair to these same equipment items. Dismantles defective equipment units to gain access to defective parts using hoists, power, & hand tools. Performs mechanical tasks as described on work orders. Catalogs machine deficiencies & other items that need repair on the machines being serviced. Performs lubrication tasks as needed for preventative maintenance & fills in for the Lubrication Tech as needed.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma & equivalent is requiredComputer SkillsMinimum of 2 years work experience in industrial repair or maintenance .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      $21 + DOEvarious shifts:12 hours - days/nights6a-4p tues-friResponsibilities:Performs any combination of tasks needed to maintain machinery, plumbing, & other physical structures of the facility. Observes & checks mechanical devices through preventative maintenance practices to locate repair or recommend repair to these same equipment items. Dismantles defective equipment units to gain access to defective parts using hoists, power, & hand tools. Performs mechanical tasks as described on work orders. Catalogs machine deficiencies & other items that need repair on the machines being serviced. Performs lubrication tasks as needed for preventative maintenance & fills in for the Lubrication Tech as needed.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma & equivalent is requiredComputer SkillsMinimum of 2 years work experience in industrial repair or maintenance .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Winchester, Virginia
      • Temporary
      • $21.00 - $25.00 per hour
      • Various Shifts Available
      $21 + DOEvarious shifts:12 hours - days/nights6a-4p tues-friResponsibilities:Performs any combination of tasks needed to maintain machinery, plumbing, & other physical structures of the facility. Observes & checks mechanical devices through preventative maintenance practices to locate repair or recommend repair to these same equipment items. Dismantles defective equipment units to gain access to defective parts using hoists, power, & hand tools. Performs mechanical tasks as described on work orders. Catalogs machine deficiencies & other items that need repair on the machines being serviced. Performs lubrication tasks as needed for preventative maintenance & fills in for the Lubrication Tech as needed.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma & equivalent is requiredComputer SkillsMinimum of 2 years work experience in industrial repair or maintenance .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      $21 + DOEvarious shifts:12 hours - days/nights6a-4p tues-friResponsibilities:Performs any combination of tasks needed to maintain machinery, plumbing, & other physical structures of the facility. Observes & checks mechanical devices through preventative maintenance practices to locate repair or recommend repair to these same equipment items. Dismantles defective equipment units to gain access to defective parts using hoists, power, & hand tools. Performs mechanical tasks as described on work orders. Catalogs machine deficiencies & other items that need repair on the machines being serviced. Performs lubrication tasks as needed for preventative maintenance & fills in for the Lubrication Tech as needed.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma & equivalent is requiredComputer SkillsMinimum of 2 years work experience in industrial repair or maintenance .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Reno, Nevada
      • Temp to Perm
      • $18.00 - $20.00 per hour
      • 7:30 AM - 5:30 PM
      The Production Associates are responsible for handling, packaging, labeling and assembling our top quality ingredients. It's the responsibility of this position to assess the quality of materials before and during mixing, processing, cooking, and packaging and to run kitchen equipment safely.Responsibilities:Checks workstation for neat and orderly condition Communicates with outgoing operator regarding daily instructions and production Follow all Good Manufacturing Practices and Standard Operating Procedures.Records production and scrap information on daily production Notifies process technician of unresolved problems with items or equipment Assembles, packs and labels parts according to packaging procedures Complies with all plant and OSHA guidelinesWorking hours: 7:30 AM - 5:30 PMSkills:Ability to read and interpret quality documents, safety rules, operating and maintenance instructions, and procedure manuals.Education:No Degree RequiredExperience:0-1 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Temp to hire opportunity for food manufacturing facility in Northwest Reno.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Production Associates are responsible for handling, packaging, labeling and assembling our top quality ingredients. It's the responsibility of this position to assess the quality of materials before and during mixing, processing, cooking, and packaging and to run kitchen equipment safely.Responsibilities:Checks workstation for neat and orderly condition Communicates with outgoing operator regarding daily instructions and production Follow all Good Manufacturing Practices and Standard Operating Procedures.Records production and scrap information on daily production Notifies process technician of unresolved problems with items or equipment Assembles, packs and labels parts according to packaging procedures Complies with all plant and OSHA guidelinesWorking hours: 7:30 AM - 5:30 PMSkills:Ability to read and interpret quality documents, safety rules, operating and maintenance instructions, and procedure manuals.Education:No Degree RequiredExperience:0-1 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Temp to hire opportunity for food manufacturing facility in Northwest Reno.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Whitestown, Indiana
      • Temp to Perm
      • $17.00 - $18.00 per hour
      • 6:30 AM - 4:30 PM
      Spherion is hiring for Manufacturing Specialist in Whitestown, IN! Pay is $17- $18/HRShift is Monday - Friday 6:30AM - 4:30PMResponsibilities:The manufacturing production specialist will be involved in operating, troubleshooting, and maintaining various types of automation equipment used in the packaging of seed.- The candidate will work heavily with an HMI (Human Machine Interface) to control and manipulate the operations of machinery. They will be expected to take ownership of their processing area along with working with coworkers toachieve success.- Experience with Microsoft office is necessary and experience with WMS (Warehouse Management System) is strongly desired.- Manufacturing Production Specialists are involved in all facets of small material manufacturing and production.- Indoor material processing and packaging activities may include receiving, scanning, cleaning, treating, sorting, counting, labeling or warehousing seed work. May be responsible for preventive maintenance of equipment in assigned areas and ensuring operations process and procedures are followed through.- Manufacturing Production Specialist responsibilities may also include electronic data collection in laboratory settings utilizing PC and handheld data collection devices.- Additionally, maybe responsible for transporting small materials to appropriate work centers.- Activities may require bending and lifting 50 lbs, long periods of sitting or standing.- Extended hours may be requested during the peak seasons. Individuals must be able to adhere to all client SOPs and to support all site safety and regulatory compliance requirements.Working hours: 6:30 AM - 4:30 PMSkills:Previous experience with MS Office / Excel and other standard computer and software systems is required.Education:High SchoolExperience:4-7 yearsQualifications:- Highschool Diploma Required- Basic mechanical ability/understanding of equipment maintenance (able to operate and trouble shoot equipment) may be required.- 4-6 Years of Experience Apply Today! Once you apply, call or text 317-870-5555 to speak with a recruiter directly!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring for Manufacturing Specialist in Whitestown, IN! Pay is $17- $18/HRShift is Monday - Friday 6:30AM - 4:30PMResponsibilities:The manufacturing production specialist will be involved in operating, troubleshooting, and maintaining various types of automation equipment used in the packaging of seed.- The candidate will work heavily with an HMI (Human Machine Interface) to control and manipulate the operations of machinery. They will be expected to take ownership of their processing area along with working with coworkers toachieve success.- Experience with Microsoft office is necessary and experience with WMS (Warehouse Management System) is strongly desired.- Manufacturing Production Specialists are involved in all facets of small material manufacturing and production.- Indoor material processing and packaging activities may include receiving, scanning, cleaning, treating, sorting, counting, labeling or warehousing seed work. May be responsible for preventive maintenance of equipment in assigned areas and ensuring operations process and procedures are followed through.- Manufacturing Production Specialist responsibilities may also include electronic data collection in laboratory settings utilizing PC and handheld data collection devices.- Additionally, maybe responsible for transporting small materials to appropriate work centers.- Activities may require bending and lifting 50 lbs, long periods of sitting or standing.- Extended hours may be requested during the peak seasons. Individuals must be able to adhere to all client SOPs and to support all site safety and regulatory compliance requirements.Working hours: 6:30 AM - 4:30 PMSkills:Previous experience with MS Office / Excel and other standard computer and software systems is required.Education:High SchoolExperience:4-7 yearsQualifications:- Highschool Diploma Required- Basic mechanical ability/understanding of equipment maintenance (able to operate and trouble shoot equipment) may be required.- 4-6 Years of Experience Apply Today! Once you apply, call or text 317-870-5555 to speak with a recruiter directly!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Decatur, Indiana
      • Temp to Perm
      • $17.25 per hour
      • Various Shifts Available
      Spherion Staffing is hiring CNC Programmers for our client in Decatur, IN!Pay is $17.25/HRResponsibilities:- Translate the requirements of detailed part drawings into measurements for production- Perform proper set-up and calibration procedures for all equipment and accessories to be used on projects- Ensure that every machine procedure is done in accordance with the strict guidelines of the company- Follow all company safety protocol Inspect the work area and machines that were used during the day prior to leaving at the end of each shift- Attend and actively participate in training classes and safety sessionWorking hours: Various Shifts AvailableSkills:- Must possess high level basic math skills- Proven history of working with gauges and caliperEducation:High SchoolExperience:1-4 yearsQualifications:- High school diploma/GED required- 2+ years' experience using production machinery- Extensive knowledge of machine maintenance and operation required If Interested Apply Today! Then call or text (260) 706-5050 to schedule your interview!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is hiring CNC Programmers for our client in Decatur, IN!Pay is $17.25/HRResponsibilities:- Translate the requirements of detailed part drawings into measurements for production- Perform proper set-up and calibration procedures for all equipment and accessories to be used on projects- Ensure that every machine procedure is done in accordance with the strict guidelines of the company- Follow all company safety protocol Inspect the work area and machines that were used during the day prior to leaving at the end of each shift- Attend and actively participate in training classes and safety sessionWorking hours: Various Shifts AvailableSkills:- Must possess high level basic math skills- Proven history of working with gauges and caliperEducation:High SchoolExperience:1-4 yearsQualifications:- High school diploma/GED required- 2+ years' experience using production machinery- Extensive knowledge of machine maintenance and operation required If Interested Apply Today! Then call or text (260) 706-5050 to schedule your interview!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $22.50 - $26.50 per hour
      • 3:00 PM - 11:00 PM
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. FANTASTIC OPPORTUNITIES !!! DO NOT WAIT - WE WANT TO GET YOU IN A JOB !!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. FANTASTIC OPPORTUNITIES !!! DO NOT WAIT - WE WANT TO GET YOU IN A JOB !!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Whitestown, Indiana
      • Temp to Perm
      • $19.00 - $20.00 per hour
      • 6:30 AM - 4:30 PM
      Spherion is hiring for Machine Operator in Whitestown, IN! Pay is $19- $20/HRShift is Monday - Friday 6:30AM - 4:30PMResponsibilities:The manufacturing production specialist will be involved in operating, troubleshooting, and maintaining various types of automation equipment used in the packaging of seed.- The candidate will work heavily with an HMI (Human Machine Interface) to control and manipulate the operations of machinery. They will be expected to take ownership of their processing area along with working with coworkers toachieve success.- Experience with Microsoft office is necessary and experience with WMS (Warehouse Management System) is strongly desired.- Manufacturing Production Specialists are involved in all facets of small material manufacturing and production.- Indoor material processing and packaging activities may include receiving, scanning, cleaning, treating, sorting, counting, labeling or warehousing seed work. May be responsible for preventive maintenance of equipment in assigned areas and ensuring operations process and procedures are followed through.- Manufacturing Production Specialist responsibilities may also include electronic data collection in laboratory settings utilizing PC and handheld data collection devices.- Additionally, maybe responsible for transporting small materials to appropriate work centers.- Activities may require bending and lifting 50 lbs, long periods of sitting or standing.- Extended hours may be requested during the peak seasons. Individuals must be able to adhere to all client SOPs and to support all site safety and regulatory compliance requirements.Working hours: 6:30 AM - 4:30 PMSkills:Previous experience with MS Office / Excel and other standard computer and software systems is required.Education:High SchoolExperience:4-7 yearsQualifications:- Highschool Diploma Required- Basic mechanical ability/understanding of equipment maintenance (able to operate and trouble shoot equipment) may be required.- 4-6 Years of Experience Apply Today! Once you apply, call or text 317-870-5555 to speak with a recruiter directly!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring for Machine Operator in Whitestown, IN! Pay is $19- $20/HRShift is Monday - Friday 6:30AM - 4:30PMResponsibilities:The manufacturing production specialist will be involved in operating, troubleshooting, and maintaining various types of automation equipment used in the packaging of seed.- The candidate will work heavily with an HMI (Human Machine Interface) to control and manipulate the operations of machinery. They will be expected to take ownership of their processing area along with working with coworkers toachieve success.- Experience with Microsoft office is necessary and experience with WMS (Warehouse Management System) is strongly desired.- Manufacturing Production Specialists are involved in all facets of small material manufacturing and production.- Indoor material processing and packaging activities may include receiving, scanning, cleaning, treating, sorting, counting, labeling or warehousing seed work. May be responsible for preventive maintenance of equipment in assigned areas and ensuring operations process and procedures are followed through.- Manufacturing Production Specialist responsibilities may also include electronic data collection in laboratory settings utilizing PC and handheld data collection devices.- Additionally, maybe responsible for transporting small materials to appropriate work centers.- Activities may require bending and lifting 50 lbs, long periods of sitting or standing.- Extended hours may be requested during the peak seasons. Individuals must be able to adhere to all client SOPs and to support all site safety and regulatory compliance requirements.Working hours: 6:30 AM - 4:30 PMSkills:Previous experience with MS Office / Excel and other standard computer and software systems is required.Education:High SchoolExperience:4-7 yearsQualifications:- Highschool Diploma Required- Basic mechanical ability/understanding of equipment maintenance (able to operate and trouble shoot equipment) may be required.- 4-6 Years of Experience Apply Today! Once you apply, call or text 317-870-5555 to speak with a recruiter directly!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Baconton, Georgia
      • Permanent
      • $60,000 per year
      • 8:00 AM - 5:00 PM
      Spherion has partnered with a fast paced facility seeking an experienced Terminal Supervisor to join their team. This position oversees terminal in a manner that maximizes efficiency and utilizes equipment in the most economical way possible to ensure premium levels of service to our members and customers. This is an amazing direct hire opportunity that offers a salary + benefits package.Responsibilities:- Facilitates goals and objectives outlined by regional terminal management, Responsible for managing and making recommendations regarding terminal-level expenses with assistance of regional terminal management. Ensures the operation provides premium levels of services to both customers and members. - Ensures all operational, safety, and personnel reports are both accurate and completed on time. Responsible for evaluating current and proposed systems and procedures and determining and implementing changes as necessary. Submits recommendations for development of, and compliance with, transportation policies, procedures and programs. Conducts continuous analyses of vehicle and driver assignments and analyzes scheduling for possible consolidation, reviews and revises to increase efficiency and to lower costs. Assists regional terminal management in the administration, safety, and compliance with DOT Regulations. - Equipment & Maintenance Ensures all company equipment is properly cleaned & maintained, utilized, and accounted for and used in a manner that is both efficient and cost effective for both company and its members; ensure all tractor and trailer equipment meet both DOT, and DOA standards; communicate and coordinate company equipment needs with Maintenance. Responsible for terminal operation and maintenance of electronic communication systems. General facilities maintenance; maintain a clean, safe, and organized work environment. - Personnel Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws which includes interviewing, hiring, and training employees, planning, assigning, and directing work, appraising performance, rewarding and disciplining employees, addressing complaints and resolving problems. Ensures all employees are properly trained and understand the job assignments including company hardware and/or software. ? Ensures all employees adhere, and are held accountable, in accordance to company polices Facilitates a healthy, professional, and positive atmosphere for all employees Ensures all company drivers conduct and adhere to both DOT, and DOA standards - Other related duties as assigned Working hours: 8:00 AM - 5:00 PMSkills:- Ability to work in a diverse and fast-paced atmosphere both independently and as a team. - Must have high level of interpersonal skills to communicate with both internal/external customers. - Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. - Ability to write routine reports and correspondence. - Ability to speak effectively before groups of customers or employees of organization. - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. - Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. - Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.-Education:AssociateExperience:1-4 yearsQualifications:- Associate's degree - 2+ years supervisory experience in transportation operations; or equivalent combination of education and experience. Please apply with a current resume for immediate consideration.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has partnered with a fast paced facility seeking an experienced Terminal Supervisor to join their team. This position oversees terminal in a manner that maximizes efficiency and utilizes equipment in the most economical way possible to ensure premium levels of service to our members and customers. This is an amazing direct hire opportunity that offers a salary + benefits package.Responsibilities:- Facilitates goals and objectives outlined by regional terminal management, Responsible for managing and making recommendations regarding terminal-level expenses with assistance of regional terminal management. Ensures the operation provides premium levels of services to both customers and members. - Ensures all operational, safety, and personnel reports are both accurate and completed on time. Responsible for evaluating current and proposed systems and procedures and determining and implementing changes as necessary. Submits recommendations for development of, and compliance with, transportation policies, procedures and programs. Conducts continuous analyses of vehicle and driver assignments and analyzes scheduling for possible consolidation, reviews and revises to increase efficiency and to lower costs. Assists regional terminal management in the administration, safety, and compliance with DOT Regulations. - Equipment & Maintenance Ensures all company equipment is properly cleaned & maintained, utilized, and accounted for and used in a manner that is both efficient and cost effective for both company and its members; ensure all tractor and trailer equipment meet both DOT, and DOA standards; communicate and coordinate company equipment needs with Maintenance. Responsible for terminal operation and maintenance of electronic communication systems. General facilities maintenance; maintain a clean, safe, and organized work environment. - Personnel Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws which includes interviewing, hiring, and training employees, planning, assigning, and directing work, appraising performance, rewarding and disciplining employees, addressing complaints and resolving problems. Ensures all employees are properly trained and understand the job assignments including company hardware and/or software. ? Ensures all employees adhere, and are held accountable, in accordance to company polices Facilitates a healthy, professional, and positive atmosphere for all employees Ensures all company drivers conduct and adhere to both DOT, and DOA standards - Other related duties as assigned Working hours: 8:00 AM - 5:00 PMSkills:- Ability to work in a diverse and fast-paced atmosphere both independently and as a team. - Must have high level of interpersonal skills to communicate with both internal/external customers. - Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. - Ability to write routine reports and correspondence. - Ability to speak effectively before groups of customers or employees of organization. - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. - Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. - Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.-Education:AssociateExperience:1-4 yearsQualifications:- Associate's degree - 2+ years supervisory experience in transportation operations; or equivalent combination of education and experience. Please apply with a current resume for immediate consideration.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.50 - $40.50 per hour
      • 3:00 PM - 11:00 PM
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 3:00 PM - 11:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! THESE OPPORTUNITIES ARE PASSING YOU BY.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 3:00 PM - 11:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! THESE OPPORTUNITIES ARE PASSING YOU BY.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $22.50 - $26.50 per hour
      • 11:00 PM - 7:00 AM
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 11:00 PM - 7:00 AMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. HURRY TO THESE JOBS, BEFORE THEY DISAPPEAR !!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 11:00 PM - 7:00 AMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. HURRY TO THESE JOBS, BEFORE THEY DISAPPEAR !!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $17.20 - $21.00 per hour
      • 1:00 PM - 1:00 AM
      Spherion has a great DIRECT HIRE opportunity for a Weekend HOURS Maintenance Technician. (Friday-Sunday 1pm-1:30am)The ideal candidate will take initiative, solve problems, and make decisions. We are seeking a Maintenance Technician to make sure our equipment is running smoothly Friday, Saturday and Sunday. This is a unique work schedule that could be perfect for someone who has other obligations/interests during the standard work week! In this role, you will keep the plant and equipment running in a safe and efficient manner and maintain/repair building and equipment in accordance with established company policies and procedures.Responsibilities:Manage start-up to make sure equipment is in proper operating condition.Demand Maintenance as assigned: Skill in diagnosing equipment defects and making necessary repairs.Maintain, repair and troubleshoot machinery, ovens, mechanical lift trucks, and facilities problems as needed for production issues and efficiency.Safety operate various machines, including a Band Saw, Break Press, Mill, Lathe, Grinder, etc.Inspect machines and equipment for conformance with operational standards.Maintain all areas of the shop, boiler room, and the interior/exterior of the plant.Troubleshoot electrical functions (i.e. motors, controls, PLC function, and other basic wiring)Confers with management and suppliers to resolve maintenance problems and recommends measures to improve operations and conditions of machines and equipmentComplete Preventative Maintenance tasks as assigned.Assist with inventory control of tools and parts on hand.Work with tools and power equipment as well as material handling.Operate mechanical forklift, pallet jack, battery-changer and stock picker. Follow Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) training, along with company pre-requisite programs, Standard Operating Procedures (SOPs), and Standard Sanitation Operating Procedures (SSOPs).Performs other duties and responsibilities as necessary.Working hours: 1:00 PM - 1:00 AMSkills:Ability to read and interpret documents such as safety rules, operating and/or maintenance instructions and procedure manuals.Ability to write routine breakdown, preventive maintenance and other maintenance related reports and correspondence.Intermediate verbal communication skills in English.Ability to add and subtract, multiply, and divide using whole numbers, common fractions, and decimals.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades (i.e. welding, tap measure, band saw, lathe, caliper, micrometer, etc.).Self-motivated, able to work unsupervised and with teamsProject orientedMulti-tasking abilityAttention to detailAbility to work in a fast-paced environmentWork well with othersExcellent verbal and written communication skills; must work effectively with all levels of management and team membersEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED1-5 years of related experience and/or training or equivalent combination of education and experiencePreferred: Basic knowledge of manufacturing.Facility maintenance experience preferredIndustrial mechanical experience.Knowledge of hydraulics, pneumatics and electronicsKnowledge of electrical/mechanical safety practicesPrior Knowledge of food processing equipment helpful. Electrical and electrical troubleshooting of 120/240/480 3ph sy
      Spherion has a great DIRECT HIRE opportunity for a Weekend HOURS Maintenance Technician. (Friday-Sunday 1pm-1:30am)The ideal candidate will take initiative, solve problems, and make decisions. We are seeking a Maintenance Technician to make sure our equipment is running smoothly Friday, Saturday and Sunday. This is a unique work schedule that could be perfect for someone who has other obligations/interests during the standard work week! In this role, you will keep the plant and equipment running in a safe and efficient manner and maintain/repair building and equipment in accordance with established company policies and procedures.Responsibilities:Manage start-up to make sure equipment is in proper operating condition.Demand Maintenance as assigned: Skill in diagnosing equipment defects and making necessary repairs.Maintain, repair and troubleshoot machinery, ovens, mechanical lift trucks, and facilities problems as needed for production issues and efficiency.Safety operate various machines, including a Band Saw, Break Press, Mill, Lathe, Grinder, etc.Inspect machines and equipment for conformance with operational standards.Maintain all areas of the shop, boiler room, and the interior/exterior of the plant.Troubleshoot electrical functions (i.e. motors, controls, PLC function, and other basic wiring)Confers with management and suppliers to resolve maintenance problems and recommends measures to improve operations and conditions of machines and equipmentComplete Preventative Maintenance tasks as assigned.Assist with inventory control of tools and parts on hand.Work with tools and power equipment as well as material handling.Operate mechanical forklift, pallet jack, battery-changer and stock picker. Follow Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) training, along with company pre-requisite programs, Standard Operating Procedures (SOPs), and Standard Sanitation Operating Procedures (SSOPs).Performs other duties and responsibilities as necessary.Working hours: 1:00 PM - 1:00 AMSkills:Ability to read and interpret documents such as safety rules, operating and/or maintenance instructions and procedure manuals.Ability to write routine breakdown, preventive maintenance and other maintenance related reports and correspondence.Intermediate verbal communication skills in English.Ability to add and subtract, multiply, and divide using whole numbers, common fractions, and decimals.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades (i.e. welding, tap measure, band saw, lathe, caliper, micrometer, etc.).Self-motivated, able to work unsupervised and with teamsProject orientedMulti-tasking abilityAttention to detailAbility to work in a fast-paced environmentWork well with othersExcellent verbal and written communication skills; must work effectively with all levels of management and team membersEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED1-5 years of related experience and/or training or equivalent combination of education and experiencePreferred: Basic knowledge of manufacturing.Facility maintenance experience preferredIndustrial mechanical experience.Knowledge of hydraulics, pneumatics and electronicsKnowledge of electrical/mechanical safety practicesPrior Knowledge of food processing equipment helpful. Electrical and electrical troubleshooting of 120/240/480 3ph sy
      • West Springfield, Massachusetts
      • Permanent
      • $43,680 - $56,550 per year
      • 6:00 PM - 1:45 AM
      Pressman involves the preparation, layout, operation and maintenance of printing presses and related equipment. The positions included two full-time and two part-time.:Pressman responsibilitiesPressman assists the Press/Mail Team Leader or acts in place of the Press-Mail Team Leader, with the set-up, execution and maintenance of the daily press operation producing commercial print publications in a cost-effective manner achieving the highest quality standards possible using existing technology. Must meet internal/external expectations for reproduction quality, content freshness and productivity while cost-effectively managing materials consumption.Working hours: 6:00 PM - 1:45 AMPressman skills:Setting and maintaining a balance of ink and water, registration of printing, operating ABB ink setting controls, and operating press folders, as well as handling, preparing and loading paper on the press, preparation of pasters, preparing the reel room report, and related duties. Ensuring quality control during a press run, and the cleanup and maintenance of printing units and folders. Checking reproduction during a press run to see if it is clear, registered, and that the ink is properly set within a specified density range.Responsible for minimizing white waste, printed waste, and press downtime attributed to paster breaks, running breaks, and other mechanical or operational failures. Must work together as a team to produce consistent quality of reproduction, to meet dispatch schedules, and to maintain an efficient and cost effective operation. Responsible for assisting with training for Trainees and press/mail assistants.Education:High SchoolExperience:1-4 yearsQualifications:Pressman qualifications:High School diploma or equivalent1-4 years experience Please apply with us online at https://www.spherion.com/apply/75058Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Pressman involves the preparation, layout, operation and maintenance of printing presses and related equipment. The positions included two full-time and two part-time.:Pressman responsibilitiesPressman assists the Press/Mail Team Leader or acts in place of the Press-Mail Team Leader, with the set-up, execution and maintenance of the daily press operation producing commercial print publications in a cost-effective manner achieving the highest quality standards possible using existing technology. Must meet internal/external expectations for reproduction quality, content freshness and productivity while cost-effectively managing materials consumption.Working hours: 6:00 PM - 1:45 AMPressman skills:Setting and maintaining a balance of ink and water, registration of printing, operating ABB ink setting controls, and operating press folders, as well as handling, preparing and loading paper on the press, preparation of pasters, preparing the reel room report, and related duties. Ensuring quality control during a press run, and the cleanup and maintenance of printing units and folders. Checking reproduction during a press run to see if it is clear, registered, and that the ink is properly set within a specified density range.Responsible for minimizing white waste, printed waste, and press downtime attributed to paster breaks, running breaks, and other mechanical or operational failures. Must work together as a team to produce consistent quality of reproduction, to meet dispatch schedules, and to maintain an efficient and cost effective operation. Responsible for assisting with training for Trainees and press/mail assistants.Education:High SchoolExperience:1-4 yearsQualifications:Pressman qualifications:High School diploma or equivalent1-4 years experience Please apply with us online at https://www.spherion.com/apply/75058Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Clovis, California
      • Temp to Perm
      • $18.00 - $20.00 per hour
      • 7:00 AM - 4:00 PM
      Preventative Maintenance Technician will perform semi -skilled preventative maintenance and will work directly with staff that perform skilledmaintenance, tearing down racks and relocating them in the building. Painting walkway paths, machinery, etc. and assisting Maintenance personal.Responsibilities:1. Ability to interact with supervisors, staff, vendors, and the public using a positivecollaborative approach.2. Ability to consistently complete assigned work while attending to multiple tasks andprioritizing projects to meet deadlines as directed.3. Ability to problem solve and engage necessary staff/supervisors to address emergingfacility issues.4. Initiative and ability to work with minimal direction/monitoring; sound judgment anddecision making capabilities are essential.5. General knowledge of line voltage and low voltage electrical systems, plumbing,carpentry, cabinetry, locksmith/door/hardware, painting, welding skills, and mechanicalequipment/, fire/security systems and maintenance trades.6. General knowledge of maintenance/grounds equipment operation, maintenance and repair.7. Ability to maintain confidential information.8. Ability to operate computers and learn specific software programs.9. Must model and maintain exemplary attendance and punctuality.10. Performs other duties as assigned by administrator and/or designee.Working hours: 7:00 AM - 4:00 PMSkills:While performing the duties of this job, the employee is frequently required to bend, crawl, sit,talk, move about, hear and speak.The employee must occasionally lift and/or move up to 55 pounds and more than 55 poundsusing appropriate equipment. Specific vision abilities required by this job include close vision, distance vision, color vision,peripheral vision, depth perception, and the ability to adjust focus. Employee is required to useproperly use such safety equipment as is appropriate to the work to prevent injury to self orothers.Education:TradeExperience:1-4 yearsQualifications:High school graduate or equivalent.Successful recent work experience in a field related to this position. If this is a job that you have previous job experience, go online to www.spherion.com/apply/75050Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.San Francisco Fair Chance Ordinance:Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.
      Preventative Maintenance Technician will perform semi -skilled preventative maintenance and will work directly with staff that perform skilledmaintenance, tearing down racks and relocating them in the building. Painting walkway paths, machinery, etc. and assisting Maintenance personal.Responsibilities:1. Ability to interact with supervisors, staff, vendors, and the public using a positivecollaborative approach.2. Ability to consistently complete assigned work while attending to multiple tasks andprioritizing projects to meet deadlines as directed.3. Ability to problem solve and engage necessary staff/supervisors to address emergingfacility issues.4. Initiative and ability to work with minimal direction/monitoring; sound judgment anddecision making capabilities are essential.5. General knowledge of line voltage and low voltage electrical systems, plumbing,carpentry, cabinetry, locksmith/door/hardware, painting, welding skills, and mechanicalequipment/, fire/security systems and maintenance trades.6. General knowledge of maintenance/grounds equipment operation, maintenance and repair.7. Ability to maintain confidential information.8. Ability to operate computers and learn specific software programs.9. Must model and maintain exemplary attendance and punctuality.10. Performs other duties as assigned by administrator and/or designee.Working hours: 7:00 AM - 4:00 PMSkills:While performing the duties of this job, the employee is frequently required to bend, crawl, sit,talk, move about, hear and speak.The employee must occasionally lift and/or move up to 55 pounds and more than 55 poundsusing appropriate equipment. Specific vision abilities required by this job include close vision, distance vision, color vision,peripheral vision, depth perception, and the ability to adjust focus. Employee is required to useproperly use such safety equipment as is appropriate to the work to prevent injury to self orothers.Education:TradeExperience:1-4 yearsQualifications:High school graduate or equivalent.Successful recent work experience in a field related to this position. If this is a job that you have previous job experience, go online to www.spherion.com/apply/75050Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.San Francisco Fair Chance Ordinance:Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 8:00 AM - 4:30 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.50 - $40.50 per hour
      • 7:00 AM - 3:00 PM
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! JOBS ARE DISAPPEARING FAST.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! JOBS ARE DISAPPEARING FAST.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Van Buren, Indiana
      • Temp to Perm
      • $17.25 - $19.25 per hour
      • Various Shifts Available
      Weaver Popcorn has IMMEDIATE OPENINGS for skilled Machine Operators in Van Buren, IN!Shifts & Pay:DAYS: 4:30 AM - 4:45PM - $17.25/HRNIGHTS: 4:30PM - 4:45AM - $19.25/HRROTATING 2-2-3 SCHEDULEInterested candidates preferably have experience in a manufacturing environment and must have a mechanical aptitude, and basic computer knowledge.Responsibilities:Operate equipment as trained and required per the SOPOperate machinery to include tasks of troubleshooting, maintenance, and repairs as required to fix or improve integrity and functionality of equipmentPerform all quality checksProduce products to required specificationsPerform Lockout/Tagout whenever service, maintenance, or repair will be performed.Working hours: Various Shifts AvailableSkills:Benefits Offered once Employee is hired on Full Time with Weaver!Dental InsuranceVision InsuranceHealth Insurance401k MatchEducation:High SchoolExperience:1-4 yearsQualifications:High school education or equivalentValid Operators LicenseBasic computer knowledgeAble to stand 8 to 12 hours per shiftAble to lift up to 50 lbs If interested, Apply Today!Once you apply, call or text us at 260-496-9900 to get started ASAP!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Weaver Popcorn has IMMEDIATE OPENINGS for skilled Machine Operators in Van Buren, IN!Shifts & Pay:DAYS: 4:30 AM - 4:45PM - $17.25/HRNIGHTS: 4:30PM - 4:45AM - $19.25/HRROTATING 2-2-3 SCHEDULEInterested candidates preferably have experience in a manufacturing environment and must have a mechanical aptitude, and basic computer knowledge.Responsibilities:Operate equipment as trained and required per the SOPOperate machinery to include tasks of troubleshooting, maintenance, and repairs as required to fix or improve integrity and functionality of equipmentPerform all quality checksProduce products to required specificationsPerform Lockout/Tagout whenever service, maintenance, or repair will be performed.Working hours: Various Shifts AvailableSkills:Benefits Offered once Employee is hired on Full Time with Weaver!Dental InsuranceVision InsuranceHealth Insurance401k MatchEducation:High SchoolExperience:1-4 yearsQualifications:High school education or equivalentValid Operators LicenseBasic computer knowledgeAble to stand 8 to 12 hours per shiftAble to lift up to 50 lbs If interested, Apply Today!Once you apply, call or text us at 260-496-9900 to get started ASAP!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $14.50 per hour
      • 7:00 AM - 3:00 PM
      Our client in North Mankato needs assemblers, people who want to work FT hours, and learn new skills on the job! Entry level position in the Assembly Department for training and learning assembly processes. Assembles and tests sub-assemblies for finished products, valves, or hydraulic cylinders. Performs the following duties under the close supervision of a Manufacturing Supervisor.Responsibilities:Will include, but not limited to the following areas:Gathers blueprints, routing sheets, setting specifications, and all related fixtures and tools necessary to assembly the products when directed. Moves parts to assembly area from storage racks. Fastens parts together with bolts, screws, speed clips, or other fasteners. Uses blueprints, routing sheets, settings specifications, required hand tools and fixtures, and test benches to assist in assembly operation. Uses a variety of hand tools in a safe manner. Assembles parts into repair kits and switches; then packages and moves the products to the shipping department for further processing. Replaces all paper work from assigned job(s); cleans workstation and area for next job. Inspects products prior to packaging and returns rejected products to production departments.Observes packaging operations and inspects containers to verify conformance to specifications.Requisitions containers and other supplies of delivery to work stations.Establishes or adjusts work procedures to meet production schedules. Tallies number of products packaged or records information such as type of products packaged.Learns and maintains time and production records.Operates pallet jack to assist in loading or moving materials and products. Packs parts properly to prevent damage during transportation to next operation. Works overtime as requested/required by supervisor.Follows and monitors work instructions and ISO procedures.Looks for and recommends product and process improvements in support of corporate goals, objectives and activities.Working hours: 7:00 AM - 3:00 PMSkills:Ability to read and understand work instructions. Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, Engineering prints and drawings as well as procedure manuals. Ability to communicate effectively with shipping clerks, other assembly and shop personnel.Education:High SchoolExperience:0-1 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or disabilities to perform the essential functions.High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client in North Mankato needs assemblers, people who want to work FT hours, and learn new skills on the job! Entry level position in the Assembly Department for training and learning assembly processes. Assembles and tests sub-assemblies for finished products, valves, or hydraulic cylinders. Performs the following duties under the close supervision of a Manufacturing Supervisor.Responsibilities:Will include, but not limited to the following areas:Gathers blueprints, routing sheets, setting specifications, and all related fixtures and tools necessary to assembly the products when directed. Moves parts to assembly area from storage racks. Fastens parts together with bolts, screws, speed clips, or other fasteners. Uses blueprints, routing sheets, settings specifications, required hand tools and fixtures, and test benches to assist in assembly operation. Uses a variety of hand tools in a safe manner. Assembles parts into repair kits and switches; then packages and moves the products to the shipping department for further processing. Replaces all paper work from assigned job(s); cleans workstation and area for next job. Inspects products prior to packaging and returns rejected products to production departments.Observes packaging operations and inspects containers to verify conformance to specifications.Requisitions containers and other supplies of delivery to work stations.Establishes or adjusts work procedures to meet production schedules. Tallies number of products packaged or records information such as type of products packaged.Learns and maintains time and production records.Operates pallet jack to assist in loading or moving materials and products. Packs parts properly to prevent damage during transportation to next operation. Works overtime as requested/required by supervisor.Follows and monitors work instructions and ISO procedures.Looks for and recommends product and process improvements in support of corporate goals, objectives and activities.Working hours: 7:00 AM - 3:00 PMSkills:Ability to read and understand work instructions. Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, Engineering prints and drawings as well as procedure manuals. Ability to communicate effectively with shipping clerks, other assembly and shop personnel.Education:High SchoolExperience:0-1 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or disabilities to perform the essential functions.High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Kenton, Ohio
      • Temp to Perm
      • $18.00 - $0.00 per hour
      We are hiring immediately for Mold Setters for a company in Kenton, OH. Earn up to $18.00 an hour. Responsibilities for the Mold Setters: This position ensures the efficient mold changes and operation of production equipment. Supports maintenance projects and repairs. Responsible for the assembly and disassembly of tooling. Responsible for press set-up after tooling changes. Changes tooling as required by the production schedule. Communicates tooling issues. Troubleshoots plant maintenance and safety issues if applicable. Informs appropriate individuals of maintenance item needed and maintains adequate supply. Supports and maintains preventative/predictive maintenance program (including documentation). Organizes and maintains the mold area. Other duties as necessary and as assigned by supervisor. Requirements for the Mold Setters: High School Diploma or GED 5 years of experience in manufacturing / production environment Good interpersonal communication skills Working knowledge/experience in manufacturing processes, electrical, pneumatic, hydraulic, and preventative maintenance Proficiency in Microsoft Office computer application programs and good keyboarding skills Basic operating knowledge of foam molding processes and equipment Forklift operator certification Basic math skills Good oral and written communication skills Compensation & Benefits for the Mold Setters: Earn $18.00 an hour Work schedule is Sunday through Saturday with shift schedules between 8 to 12 hours daily. Normal work week is 40 hours. Full benefits once hired in No travel is expected for this position Spherion offers ACA compliant health insurance once you start working! For additional details, please ask during your orientation with us!! Apply today by filling out our online 'Apply Now' application at ApplyOhio.com and then calling the Spherion of Kenton office at (937) 565-4289!
      We are hiring immediately for Mold Setters for a company in Kenton, OH. Earn up to $18.00 an hour. Responsibilities for the Mold Setters: This position ensures the efficient mold changes and operation of production equipment. Supports maintenance projects and repairs. Responsible for the assembly and disassembly of tooling. Responsible for press set-up after tooling changes. Changes tooling as required by the production schedule. Communicates tooling issues. Troubleshoots plant maintenance and safety issues if applicable. Informs appropriate individuals of maintenance item needed and maintains adequate supply. Supports and maintains preventative/predictive maintenance program (including documentation). Organizes and maintains the mold area. Other duties as necessary and as assigned by supervisor. Requirements for the Mold Setters: High School Diploma or GED 5 years of experience in manufacturing / production environment Good interpersonal communication skills Working knowledge/experience in manufacturing processes, electrical, pneumatic, hydraulic, and preventative maintenance Proficiency in Microsoft Office computer application programs and good keyboarding skills Basic operating knowledge of foam molding processes and equipment Forklift operator certification Basic math skills Good oral and written communication skills Compensation & Benefits for the Mold Setters: Earn $18.00 an hour Work schedule is Sunday through Saturday with shift schedules between 8 to 12 hours daily. Normal work week is 40 hours. Full benefits once hired in No travel is expected for this position Spherion offers ACA compliant health insurance once you start working! For additional details, please ask during your orientation with us!! Apply today by filling out our online 'Apply Now' application at ApplyOhio.com and then calling the Spherion of Kenton office at (937) 565-4289!
      • Erie, Pennsylvania
      • Temp to Perm
      • $13.00 - $16.00 per hour
      • You pick the shift that works for you
      If you have experience in automotive, welding, metal fabrication and want to be able to pick the shift that works for you, this is a great opportunity for you! We are hiring for someone with basic fabrication experience and training will be provided on 1st shift 7am until 3:30pm! You must be able to read basic blueprints and have basic knowledge of maintenance procedures.   Great small team experience working with talented Engineers making products that matter! Apply today by sending your resume to Erie-Pa@spherion.com or call us at 814-454-7305!
      If you have experience in automotive, welding, metal fabrication and want to be able to pick the shift that works for you, this is a great opportunity for you! We are hiring for someone with basic fabrication experience and training will be provided on 1st shift 7am until 3:30pm! You must be able to read basic blueprints and have basic knowledge of maintenance procedures.   Great small team experience working with talented Engineers making products that matter! Apply today by sending your resume to Erie-Pa@spherion.com or call us at 814-454-7305!
      • Owatonna, Minnesota
      • Permanent
      • $22.50 - $26.50 per hour
      • 7:00 AM - 3:00 PM
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years??? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. APPLY & SHOW US WHAT YOUR MADE OF!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years??? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. APPLY & SHOW US WHAT YOUR MADE OF!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.50 - $40.50 per hour
      • 11:00 PM - 7:00 AM
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste.Perform other duties as assigned.Working hours: 11:00 PM - 7:00 AMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools WHAT ARE YOU WAITING FOR?! APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste.Perform other duties as assigned.Working hours: 11:00 PM - 7:00 AMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools WHAT ARE YOU WAITING FOR?! APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Salt Lake City, Utah
      • Temp to Perm
      • $22.00 - $33.00 per hour
      • 6:00 AM - 6:00 PM
      We are Looking for Awesome Machine Operators who want to be part of a fast paced, game changing company in the Salt Lake valley.This role will play an integral part in the operations. Our client has revolutionized the production process and is looking to build an amazing culture of engagement and inclusion from the start. Extraordinary results can be achieved with the right people on the team, and we are committed to training and advancing careers of those showing potential and demonstrating an excellent performance.If you have machine operating experience and are looking for a company that is committed to not only its customers, but also its employees - this is what you've been searching for!!DON'T WAIT!! This job will go quickly and we are HIRING IMMEDIATELY!!Responsibilities:We are looking for qualified Machine Operators responsible for the safe and efficient operation of moderately complex, mechanically operated, high speed machinery in the food production process.This includes:-start-up-operation-adjustment to proper parameters-preventative maintenance-trouble shooting-sanitation and cleaning of the equipment.Working hours: 6:00 AM - 6:00 PMSkills:-Prior machine operating and production experience, preferably in a food manufacturing environment-Attention to detail-Safety conscious-Must be able to lift 50 pounds frequently throughout the day-Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus regularlyEducation:High SchoolExperience:1-4 yearsQualifications:-High School Diploma or GED-1 year production experience (in a food manufacturing environment preferred)-MUST have reliable transportation, not transit accessibleSHIFT:Must be able to work 12 hour shift from 6am - 6pm OR 6pm - 6am on a rotating 2/2/3 schedule. You'll have a 3 day weekend every other weekend! Apply HERE--OR--Send your resume to beverleykeith@spherion.comText MACHINE OPERATOR to 801-519-5093Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are Looking for Awesome Machine Operators who want to be part of a fast paced, game changing company in the Salt Lake valley.This role will play an integral part in the operations. Our client has revolutionized the production process and is looking to build an amazing culture of engagement and inclusion from the start. Extraordinary results can be achieved with the right people on the team, and we are committed to training and advancing careers of those showing potential and demonstrating an excellent performance.If you have machine operating experience and are looking for a company that is committed to not only its customers, but also its employees - this is what you've been searching for!!DON'T WAIT!! This job will go quickly and we are HIRING IMMEDIATELY!!Responsibilities:We are looking for qualified Machine Operators responsible for the safe and efficient operation of moderately complex, mechanically operated, high speed machinery in the food production process.This includes:-start-up-operation-adjustment to proper parameters-preventative maintenance-trouble shooting-sanitation and cleaning of the equipment.Working hours: 6:00 AM - 6:00 PMSkills:-Prior machine operating and production experience, preferably in a food manufacturing environment-Attention to detail-Safety conscious-Must be able to lift 50 pounds frequently throughout the day-Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus regularlyEducation:High SchoolExperience:1-4 yearsQualifications:-High School Diploma or GED-1 year production experience (in a food manufacturing environment preferred)-MUST have reliable transportation, not transit accessibleSHIFT:Must be able to work 12 hour shift from 6am - 6pm OR 6pm - 6am on a rotating 2/2/3 schedule. You'll have a 3 day weekend every other weekend! Apply HERE--OR--Send your resume to beverleykeith@spherion.comText MACHINE OPERATOR to 801-519-5093Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Nacogdoches, Texas
      • Temporary
      • $14.00 - $16.00 per hour
      • Various Shifts Available
      Sets up and operates machine to perform. Demonstrates skills in using machine tools, hand tools, and measuring instruments. Familiar with the metric measuring systems. Possesses an understanding of machine functions and specification standards. Knowledgeable of assembly and repair techniques required.Responsibilities:Routine machine maintenance, welding , sanding, polishing. Routine inspections Repetitive line workWorking hours: Various Shifts AvailableSkills:Ability to understand both written and verbal instructions. Possess strong work ethic. Time management.1-4 years experience in Machine Operation.Education:High SchoolExperience:1-4 yearsQualifications:High School / GED ResumeMust be flexible Apply Today !Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Sets up and operates machine to perform. Demonstrates skills in using machine tools, hand tools, and measuring instruments. Familiar with the metric measuring systems. Possesses an understanding of machine functions and specification standards. Knowledgeable of assembly and repair techniques required.Responsibilities:Routine machine maintenance, welding , sanding, polishing. Routine inspections Repetitive line workWorking hours: Various Shifts AvailableSkills:Ability to understand both written and verbal instructions. Possess strong work ethic. Time management.1-4 years experience in Machine Operation.Education:High SchoolExperience:1-4 yearsQualifications:High School / GED ResumeMust be flexible Apply Today !Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 8:00 AM - 4:30 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 7:00 AM - 3:15 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
      • Nacogdoches, Texas
      • Temporary
      • $12.00 - $14.00 per hour
      • 7:00 AM - 3:00 PM (Various Shifts Available)
      operates CNC ,conventional machines or works assembly stations. brings product to print specifications ,works in manufacturing cells.Responsibilities:maintains a clean facility, maintenance of tools and equipment, performs Q/A checks and adheres to all safety standards & guidelines.Working hours: 7:00 AM - 3:00 PM (Various Shifts Available)Skills:Basic knowledge of use of measuring equipment, ability to read blueprints & design drawings. basic mathematical skills ,demonstrates mechanical aptitude, ability t work in close proximity to other personnel ,possess a positive work ethic.Education:High SchoolExperience:0-1 yearsQualifications:must have experience with hand tools ,mics, calipers, scales, .must possess high school diploma or GED ,must have no record of onsite incidents in the past 12 months. must be willing to work occasional overtime . Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      operates CNC ,conventional machines or works assembly stations. brings product to print specifications ,works in manufacturing cells.Responsibilities:maintains a clean facility, maintenance of tools and equipment, performs Q/A checks and adheres to all safety standards & guidelines.Working hours: 7:00 AM - 3:00 PM (Various Shifts Available)Skills:Basic knowledge of use of measuring equipment, ability to read blueprints & design drawings. basic mathematical skills ,demonstrates mechanical aptitude, ability t work in close proximity to other personnel ,possess a positive work ethic.Education:High SchoolExperience:0-1 yearsQualifications:must have experience with hand tools ,mics, calipers, scales, .must possess high school diploma or GED ,must have no record of onsite incidents in the past 12 months. must be willing to work occasional overtime . Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 142 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.