You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    11 Temp to Perm jobs found in Waseca, Minnesota

    Filter3
    Clear all
      • Owatonna, Minnesota
      • Temp to Perm
      • $19.57 per hour
      • 6:00 AM - 2:30 PM
      Work for a great local company in Owatonna, MN! This is an evaluation to hire position.Entry Level Production Position! Great hours! Weekly pay!Monday-Friday: 6:00 AM - 2:30 PMPOSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PMSkills:-Previous experience in a manufacturing environment-Attention to detail-Work in a fast paced environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.-Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently-Stand, twist, bend and rotate continuously Entry level position. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a great local company in Owatonna, MN! This is an evaluation to hire position.Entry Level Production Position! Great hours! Weekly pay!Monday-Friday: 6:00 AM - 2:30 PMPOSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PMSkills:-Previous experience in a manufacturing environment-Attention to detail-Work in a fast paced environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.-Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently-Stand, twist, bend and rotate continuously Entry level position. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $24.99 per hour
      • 6:00 PM - 6:00 AM
      Work for a company that has been voted best place to work in Southern MN in 2022! This company is looking for a night shift Preventative Maintenance & Repair Technician. Night Shift - 6:00 PM - 6:00 AM (Work 4 days on, 4 days off)*Direct Hire OpportunityTotal Compensation Package upon Full Time Employment:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and 10 holidays-FREE Employee Coverage: Health, Dental, Vision, Life Insurance-401K with company match, Funded Pension Plan and Stock Purchase Plan-Company short-term disability with optional long-term disabilityThe PMR (Preventative, Maintenance, & Repair Technician) ensures that all equipment from the front to the end area is maintained and operating to produce cans which meet quality specifications.Responsibilities:-Recognize and correct unsafe conditions, guarding, procedures, or personnel actions.-Perform daily, weekly and monthly preventative maintenance on all F.E. equipment as required.-Troubleshoot, diagnose, and repair all front end production and support equipment-Train Front End Maintainers on equipment operation and maintenance requirements.-Perform periodic machinery testing/inspection to determine alignment, wear, and operating efficiency.-Complete required documentation on machine maintenance and test results.-Assist in other areas as needed to maintain smooth can flow through the plant.-Maintain cleanliness of all work areas and machines and practice proper safetyprocedures.-Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:-Mechanically inclined-Previous maintenance work on industrial machines preferred-Previous industrial maintenance backgroundEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Able to perform complete overhauls of all Front End equipment, including the replacement, repair and alignment of cupper die set.-Thorough knowledge and understanding of manufacturing process, equipment, and quality specifications.-Ability to demonstrate mechanical aptitude on all can and end making equipment in the plant, depending on the primary area of responsibility assigned.-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a company that has been voted best place to work in Southern MN in 2022! This company is looking for a night shift Preventative Maintenance & Repair Technician. Night Shift - 6:00 PM - 6:00 AM (Work 4 days on, 4 days off)*Direct Hire OpportunityTotal Compensation Package upon Full Time Employment:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and 10 holidays-FREE Employee Coverage: Health, Dental, Vision, Life Insurance-401K with company match, Funded Pension Plan and Stock Purchase Plan-Company short-term disability with optional long-term disabilityThe PMR (Preventative, Maintenance, & Repair Technician) ensures that all equipment from the front to the end area is maintained and operating to produce cans which meet quality specifications.Responsibilities:-Recognize and correct unsafe conditions, guarding, procedures, or personnel actions.-Perform daily, weekly and monthly preventative maintenance on all F.E. equipment as required.-Troubleshoot, diagnose, and repair all front end production and support equipment-Train Front End Maintainers on equipment operation and maintenance requirements.-Perform periodic machinery testing/inspection to determine alignment, wear, and operating efficiency.-Complete required documentation on machine maintenance and test results.-Assist in other areas as needed to maintain smooth can flow through the plant.-Maintain cleanliness of all work areas and machines and practice proper safetyprocedures.-Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:-Mechanically inclined-Previous maintenance work on industrial machines preferred-Previous industrial maintenance backgroundEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Able to perform complete overhauls of all Front End equipment, including the replacement, repair and alignment of cupper die set.-Thorough knowledge and understanding of manufacturing process, equipment, and quality specifications.-Ability to demonstrate mechanical aptitude on all can and end making equipment in the plant, depending on the primary area of responsibility assigned.-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $20.07 per hour
      • 2:30 PM - 11:00 PM
      Work for a great company in Owatonna, MN! They are hiring an Entry Level Production worker on 2nd shift. This is an evaluation to hire position. Entry level! Great hours! Weekly pay!Hours: 2:30 PM - 11:00 PM, Monday-FridayPOSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. -Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:30 PM - 11:00 PMSkills:-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.-Attention to detailEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently-Stand, twist, bend and rotate continuously Apply today! Don't miss out on this great opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a great company in Owatonna, MN! They are hiring an Entry Level Production worker on 2nd shift. This is an evaluation to hire position. Entry level! Great hours! Weekly pay!Hours: 2:30 PM - 11:00 PM, Monday-FridayPOSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. -Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:30 PM - 11:00 PMSkills:-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.-Attention to detailEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently-Stand, twist, bend and rotate continuously Apply today! Don't miss out on this great opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $22.08 per hour
      • 2:00 PM - 11:00 PM
      Work for a great, reputable company in Owatonna, MN! They are the leader in can manufacturing and they just won best place to work in Southern, MN in 2022!Hours: 2:00 PM - 11:00 PM, Monday-Friday***Direct Hire Opportunity***Amazing BenefitsJOB PURPOSE:To safely ensure that all end center equipment is maintained and operating to produce finished can lids which meet all process specifications.Responsibilities:-Perform set-up and maintenance of all end center equipment, which includes: upender, unwinder, multi-die press, curler, liner, oven, bagging station and conveying.-Perform set-up and maintenance of all support systems, which include compound supply, air and vacuum systems.-Inspect, upend and load coils onto the unwinder and feed into the press. Transfer materials and finished product to and from end center as needed.-Complete required quality checks to ensure process is within specification and enter data into the computer. -Perform visual checks of finished lids to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Assist in other production areas as needed to maintain a smooth flow of cans and lids through the plant.-Maintain cleanliness of all work areas and follow all safety procedures and work practices-Performs other job-related duties as required or assignedWorking hours: 2:00 PM - 11:00 PMSkills:-Previous experience in Industrial MaintenanceEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills, including working knowledge of pneumatics and hydraulics.-Working knowledge of multi die press set-up and operation. -Thorough knowledge and understanding of quality specifications.-Basic knowledge of plumbing and electrical components.-Ability to use precision measurements devices such as calipers, micrometers, dial indicators and feeler gauges.-Ability to safely operate production forklift and maintain certification.-Knowledge of safety regulations which apply to work functions. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a great, reputable company in Owatonna, MN! They are the leader in can manufacturing and they just won best place to work in Southern, MN in 2022!Hours: 2:00 PM - 11:00 PM, Monday-Friday***Direct Hire Opportunity***Amazing BenefitsJOB PURPOSE:To safely ensure that all end center equipment is maintained and operating to produce finished can lids which meet all process specifications.Responsibilities:-Perform set-up and maintenance of all end center equipment, which includes: upender, unwinder, multi-die press, curler, liner, oven, bagging station and conveying.-Perform set-up and maintenance of all support systems, which include compound supply, air and vacuum systems.-Inspect, upend and load coils onto the unwinder and feed into the press. Transfer materials and finished product to and from end center as needed.-Complete required quality checks to ensure process is within specification and enter data into the computer. -Perform visual checks of finished lids to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Assist in other production areas as needed to maintain a smooth flow of cans and lids through the plant.-Maintain cleanliness of all work areas and follow all safety procedures and work practices-Performs other job-related duties as required or assignedWorking hours: 2:00 PM - 11:00 PMSkills:-Previous experience in Industrial MaintenanceEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills, including working knowledge of pneumatics and hydraulics.-Working knowledge of multi die press set-up and operation. -Thorough knowledge and understanding of quality specifications.-Basic knowledge of plumbing and electrical components.-Ability to use precision measurements devices such as calipers, micrometers, dial indicators and feeler gauges.-Ability to safely operate production forklift and maintain certification.-Knowledge of safety regulations which apply to work functions. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $16.73 - $19.00 per hour
      • 8:00 AM - 4:30 PM
      This position supports the work of the Operations Department and Compliance Department staff by performing a range of administrative and office duties including but not limited to: program-specific data entry and verification; creating spreadsheets from collected data; typing documents such as memos, letters, meeting minutes, reports, correspondence, and administrative forms; participating in the development of program forms and newsletters; and organizing all logistics for meetings.Responsibilities:1.Performs tasks in support of multiple operational areas. These tasks are complex and time sensitive and must be completed in an accurate manner by assuring the details of all aspects of each area are effectively processed so that program interventions are timely and can be accurately measured and reported. 2.Compile and organize moderately complex information for inclusion in reports, budgets and presentations; prepare charts, graphs, or other presentations of varying complexity.3.Maintain data integrity with important member information and meet requirements of compliance standards.4.Coordinate the overall logistics for various committee meetings and ad hoc meetings. This includes scheduling meetings, and coordinating meeting logistics such as technology, food, and space setup, compiling and sending out agendas, obtaining multiple reports from internal staff, assembling printed and electronic meeting packets, and distributing materials to committee members.5.Assist department staff with general office support including but not limited to scheduling meetings, document management, and report generation to ensure efficient department operations. 6. Proofread, format, revise and edit materials such as reports, policies and procedures and department presentations and be able to discern when to ask questions for clarification.7.Coordinate the timely and accurate completion of major projects, documents and reports required to meet contractual managed care requirements.8.Complete mailings, document retrieval, and storage of documents necessary for multiple operational processes to ensure timely completion.9.Perform other duties as assigned within the scope, responsibility, and requirements of the job.Working hours: 8:00 AM - 4:30 PMSkills:-Detailed-Experience using computer and software programs-Previous office experienceEducation:High SchoolExperience:1-4 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the specific job duties.Language Skills: Must be able to read and write in English.Mathematical Skills: Must have sufficient mathematical skills to perform basic numeric functions.Accuracy: Most of the work is not checked or verified but is monitored through frequent reporting. Errors or omissions would cause delays, some waste of time.Reasoning Ability: Makes workflow and prioritizing decisions independently based upon knowledge of departmental objectives; Requires use of some judgment to comply with or carry out instructions, minor decision making, routine problem solving.Physical demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential responsibilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential responsibilities.While performing the responsibilities of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms.The employee must occasionally lift and/or move up to 5 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential responsibilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the specific job duties.The noise level in the work environment is usually low.Travel: This position requires minimal in-town travel. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position supports the work of the Operations Department and Compliance Department staff by performing a range of administrative and office duties including but not limited to: program-specific data entry and verification; creating spreadsheets from collected data; typing documents such as memos, letters, meeting minutes, reports, correspondence, and administrative forms; participating in the development of program forms and newsletters; and organizing all logistics for meetings.Responsibilities:1.Performs tasks in support of multiple operational areas. These tasks are complex and time sensitive and must be completed in an accurate manner by assuring the details of all aspects of each area are effectively processed so that program interventions are timely and can be accurately measured and reported. 2.Compile and organize moderately complex information for inclusion in reports, budgets and presentations; prepare charts, graphs, or other presentations of varying complexity.3.Maintain data integrity with important member information and meet requirements of compliance standards.4.Coordinate the overall logistics for various committee meetings and ad hoc meetings. This includes scheduling meetings, and coordinating meeting logistics such as technology, food, and space setup, compiling and sending out agendas, obtaining multiple reports from internal staff, assembling printed and electronic meeting packets, and distributing materials to committee members.5.Assist department staff with general office support including but not limited to scheduling meetings, document management, and report generation to ensure efficient department operations. 6. Proofread, format, revise and edit materials such as reports, policies and procedures and department presentations and be able to discern when to ask questions for clarification.7.Coordinate the timely and accurate completion of major projects, documents and reports required to meet contractual managed care requirements.8.Complete mailings, document retrieval, and storage of documents necessary for multiple operational processes to ensure timely completion.9.Perform other duties as assigned within the scope, responsibility, and requirements of the job.Working hours: 8:00 AM - 4:30 PMSkills:-Detailed-Experience using computer and software programs-Previous office experienceEducation:High SchoolExperience:1-4 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the specific job duties.Language Skills: Must be able to read and write in English.Mathematical Skills: Must have sufficient mathematical skills to perform basic numeric functions.Accuracy: Most of the work is not checked or verified but is monitored through frequent reporting. Errors or omissions would cause delays, some waste of time.Reasoning Ability: Makes workflow and prioritizing decisions independently based upon knowledge of departmental objectives; Requires use of some judgment to comply with or carry out instructions, minor decision making, routine problem solving.Physical demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential responsibilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential responsibilities.While performing the responsibilities of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms.The employee must occasionally lift and/or move up to 5 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential responsibilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the specific job duties.The noise level in the work environment is usually low.Travel: This position requires minimal in-town travel. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $22.58 per hour
      • 6:00 PM - 6:00 AM
      Work for an outstanding, reputable company in Owatonna, MN as a Front End Maintainer. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off)***Direct Hire Opportunity and room for growth!Total Compensation Package upon full time employment with the company:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and holidays-Comprehensive healthcare where company pays 100% of the cost for employee coverage.-401K with company match, active Pension Plan and Stock Purchase Plan-Company paid life insurance and short-term disability with optional long-term disabilityPurpose:The Front End Maintainer is responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems. This position is similar to a Machine Operator and an Industrial Maintenance Technician. Start your career today! Apply now! Urgently hiring.Responsibilities:-The Industrial Mechanic/Machine Operator will inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.-Set-up, maintenance and machine operation of the upender, unwinder, lubricator, and cupping press.-Set-up maintenance and machine operation of the body makers, trimmers, and conveying systems.-Inspect and monitor, then enter into computer the following can specifications:-flange wall thickness - mid-wall thickness - dome depth - trim can height-The machine operator will perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.-Assist in other areas as needed to maintain smooth can flow through the plant.-Complete required paperwork and documentation such as coil log, check sheets, etc.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Performs other job-related duties as required or assigned.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical aptitudeEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today! This company has great benefits and a great culture! Don't miss out on this opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for an outstanding, reputable company in Owatonna, MN as a Front End Maintainer. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off)***Direct Hire Opportunity and room for growth!Total Compensation Package upon full time employment with the company:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and holidays-Comprehensive healthcare where company pays 100% of the cost for employee coverage.-401K with company match, active Pension Plan and Stock Purchase Plan-Company paid life insurance and short-term disability with optional long-term disabilityPurpose:The Front End Maintainer is responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems. This position is similar to a Machine Operator and an Industrial Maintenance Technician. Start your career today! Apply now! Urgently hiring.Responsibilities:-The Industrial Mechanic/Machine Operator will inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.-Set-up, maintenance and machine operation of the upender, unwinder, lubricator, and cupping press.-Set-up maintenance and machine operation of the body makers, trimmers, and conveying systems.-Inspect and monitor, then enter into computer the following can specifications:-flange wall thickness - mid-wall thickness - dome depth - trim can height-The machine operator will perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.-Assist in other areas as needed to maintain smooth can flow through the plant.-Complete required paperwork and documentation such as coil log, check sheets, etc.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Performs other job-related duties as required or assigned.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical aptitudeEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today! This company has great benefits and a great culture! Don't miss out on this opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $24.00 per hour
      • 8:00 AM - 4:30 PM
      This position provides after sales support and repair services to corporate accounts and end users by addressing product repair requests and Service Repair Center inquiries while continuously supporting our commitment to customer satisfaction.Responsibilities:Provide prompt and courteous service to customers by telephone, chat, and email.Use strong communication skills to effectively listen, interpret, and respond to customer needs. Provide accurate information to customers and about repair ticket status, billing information, repair procedures, and general Service Repair questions.Make appropriate decisions regarding credits to accounts and sales order priority to ensure customer retention and satisfaction.Demonstrate a full understanding of SAP, C4C, and other online resources to respond to internal and external customer's questions and order requests.Accurately enter tickets into C4C to fulfill requests from account representatives.Maintain spreadsheets and charts relating to each national chain, OE entity, or Distributor as required by customer agreements and performance metrics.Act as a support function for other Customer Specialist team members on processes, procedures, and requirements.Work effectively with Service Repair departments to assure customer satisfaction and departmental goals are met.Continually comply with updated process methods in Customer Specialist department.Based on customer needs, make recommendations for changes to current processes in Service departments.Working hours: 8:00 AM - 4:30 PM - Hybrid Remote (In-office 2 days per week)Skills:General knowledge of repair and service processesGeneral knowledge of the products and their accessoriesEffective verbal and written communicationGeneral PC skills, including email, internet, Microsoft Word, and ExcelKeyboarding skills at 50 wpm typing and 6,000 cph data entry (Ability to accurately enter alpha numeric data)Effective Time management and problem solving skillsDetail orientated and Individual decision makingCommitment to long term customer retentionAbility to effectively communicate complex information using a professional presence in all situationsAbility to handle conflict during customer interactions while maintaining tact and customer service skills when assisting the next customerAbility to maintain a solid, credible customer relationshipAbility to function effectively independently and in a team environmentAbility to perform multiple tasks simultaneouslyEducation:AssociateExperience:4-7 yearsQualifications:Associates Degree in related field or equivalent is requiredFive years call center/office experience in customer service or direct contact with customers is requiredApply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position provides after sales support and repair services to corporate accounts and end users by addressing product repair requests and Service Repair Center inquiries while continuously supporting our commitment to customer satisfaction.Responsibilities:Provide prompt and courteous service to customers by telephone, chat, and email.Use strong communication skills to effectively listen, interpret, and respond to customer needs. Provide accurate information to customers and about repair ticket status, billing information, repair procedures, and general Service Repair questions.Make appropriate decisions regarding credits to accounts and sales order priority to ensure customer retention and satisfaction.Demonstrate a full understanding of SAP, C4C, and other online resources to respond to internal and external customer's questions and order requests.Accurately enter tickets into C4C to fulfill requests from account representatives.Maintain spreadsheets and charts relating to each national chain, OE entity, or Distributor as required by customer agreements and performance metrics.Act as a support function for other Customer Specialist team members on processes, procedures, and requirements.Work effectively with Service Repair departments to assure customer satisfaction and departmental goals are met.Continually comply with updated process methods in Customer Specialist department.Based on customer needs, make recommendations for changes to current processes in Service departments.Working hours: 8:00 AM - 4:30 PM - Hybrid Remote (In-office 2 days per week)Skills:General knowledge of repair and service processesGeneral knowledge of the products and their accessoriesEffective verbal and written communicationGeneral PC skills, including email, internet, Microsoft Word, and ExcelKeyboarding skills at 50 wpm typing and 6,000 cph data entry (Ability to accurately enter alpha numeric data)Effective Time management and problem solving skillsDetail orientated and Individual decision makingCommitment to long term customer retentionAbility to effectively communicate complex information using a professional presence in all situationsAbility to handle conflict during customer interactions while maintaining tact and customer service skills when assisting the next customerAbility to maintain a solid, credible customer relationshipAbility to function effectively independently and in a team environmentAbility to perform multiple tasks simultaneouslyEducation:AssociateExperience:4-7 yearsQualifications:Associates Degree in related field or equivalent is requiredFive years call center/office experience in customer service or direct contact with customers is requiredApply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $24.00 - $26.00 per hour
      • 8:00 AM - 4:30 PM
      This position is responsible for supporting automotive engineers through testing and troubleshooting prototype designs and making recommendations for continuous improvement.Responsibilities:Support vehicle content development through requirements, design, development, and QA phase.Gather information from vehicles, OE testers, and benchmark tools (reverse engineering).Access and research new information from the web as well as information related to the development of vehicle data, service instructions, and manualsIdentify and procure vehicles for analysis, development, and validation.Utilize automotive bus analyzers and diagnostic equipment to ensure the quality of productsUtilize knowledge of vehicle mechanical fundamentals in order to validate designsWorking hours: 8:00 AM - 4:30 PMSkills:Skilled in the usage of automotive test equipmentModerate knowledge and experience using PC applications such as MS Excel, MS Word, etc.Basic knowledge of databases, MS AccessPC configuration and installation skillsBasic math knowledge such as number systems, basic algebraClear and effective communication skills to work well in a team environment.Ability to follow and understand detailed test proceduresDemonstrated ability to be a self-starterDemonstrated ability to organize work and scheduleAbility to read flow charts including process maps, test plans, and flowsAbility to navigate the internet for research purposesAbility to work independently and with a teamEducation:TradeExperience:0-1 yearsQualifications:Knowledge of fundamental automotive technologiesKnowledge of basic vehicle systems including onboard controls, engine performance, transmission, ABS, and SIR modules Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is responsible for supporting automotive engineers through testing and troubleshooting prototype designs and making recommendations for continuous improvement.Responsibilities:Support vehicle content development through requirements, design, development, and QA phase.Gather information from vehicles, OE testers, and benchmark tools (reverse engineering).Access and research new information from the web as well as information related to the development of vehicle data, service instructions, and manualsIdentify and procure vehicles for analysis, development, and validation.Utilize automotive bus analyzers and diagnostic equipment to ensure the quality of productsUtilize knowledge of vehicle mechanical fundamentals in order to validate designsWorking hours: 8:00 AM - 4:30 PMSkills:Skilled in the usage of automotive test equipmentModerate knowledge and experience using PC applications such as MS Excel, MS Word, etc.Basic knowledge of databases, MS AccessPC configuration and installation skillsBasic math knowledge such as number systems, basic algebraClear and effective communication skills to work well in a team environment.Ability to follow and understand detailed test proceduresDemonstrated ability to be a self-starterDemonstrated ability to organize work and scheduleAbility to read flow charts including process maps, test plans, and flowsAbility to navigate the internet for research purposesAbility to work independently and with a teamEducation:TradeExperience:0-1 yearsQualifications:Knowledge of fundamental automotive technologiesKnowledge of basic vehicle systems including onboard controls, engine performance, transmission, ABS, and SIR modules Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $25.00 - $28.00 per hour
      • 8:00 AM - 5:00 PM
      The Project Coordinator is responsible for project organization, scheduling, and installation coordination for standard products to ensure on-time and within scope of all projects.Responsibilities:Serve as a single point of contact to customers after a project becomes an order Develop, track, and update multiple project schedules in a fast-paced environmentInteract with in a professional manner with all designers, engineers, production team members, contractors, and customers.Work effectively in a cross functional team environment to product project objectivesCoordinate engineering design submittals with applications engineering and customerCoordinate field measurements, installation site readiness, and integrates them with the manufacturing scheduleCoordinate all aspects of projects with internal and external partners to ensure product is installed on time and to customer needsCommunicate all project changes and resolution with appropriate team membersAssess field issues, write recalls, and coordinate resolution with customer Adheres to all workplace and trade safety laws, regulations, standards, and practices.Working hours: 8:00 AM - 5:00 PMSkills:Preferred: Experience with Project Management software; TaskRay preferredPreferred: Experience with project management skillsEducation:AssociateExperience:1-4 yearsQualifications:Required: Two-year degree or Vo-tech certificate; or 1-3 years? experience with managing projectsRequired: Demonstrated computer skills: MS Office package. Join this fun group of people who are determined to be successful, help each other out, and encourage each other daily. Apply today to be considered!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Project Coordinator is responsible for project organization, scheduling, and installation coordination for standard products to ensure on-time and within scope of all projects.Responsibilities:Serve as a single point of contact to customers after a project becomes an order Develop, track, and update multiple project schedules in a fast-paced environmentInteract with in a professional manner with all designers, engineers, production team members, contractors, and customers.Work effectively in a cross functional team environment to product project objectivesCoordinate engineering design submittals with applications engineering and customerCoordinate field measurements, installation site readiness, and integrates them with the manufacturing scheduleCoordinate all aspects of projects with internal and external partners to ensure product is installed on time and to customer needsCommunicate all project changes and resolution with appropriate team membersAssess field issues, write recalls, and coordinate resolution with customer Adheres to all workplace and trade safety laws, regulations, standards, and practices.Working hours: 8:00 AM - 5:00 PMSkills:Preferred: Experience with Project Management software; TaskRay preferredPreferred: Experience with project management skillsEducation:AssociateExperience:1-4 yearsQualifications:Required: Two-year degree or Vo-tech certificate; or 1-3 years? experience with managing projectsRequired: Demonstrated computer skills: MS Office package. Join this fun group of people who are determined to be successful, help each other out, and encourage each other daily. Apply today to be considered!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $21.00 per hour
      • 8:00 AM - 4:30 PM
      This position is responsible for properly creating and processing a service return order for a customer returned product, as well as the shipping of repaired product, Loaners, and Exchanges. This process is completed in accordance with quality requirements and time guidelines based on each product. All responsibilities are in support of the company's commitment to customer satisfaction.Responsibilities:-Identify the proper method for disposition of returned product-Verify customer account-Accurately create and fully process sales order -Properly generate invoice for returned product -Correctly administer inventory reductions of service parts used on product-Appropriately administer payment method for repairs completed-Receiving, shipping, and coordination of Vendor repair processes-Closing and preparation of shipments for tickets for repairs, loaners, and exchanges-Pick and ship repair products, loaner and exchange orders-Communicate within the department, with support departments and with external customers and suppliers-Ensure that products are properly serviced and/or returned to customer within time guidelines set by department supervisor-Continually comply with updated service return methodsWorking hours: 8:00 AM - 4:30 PMSkills:-Ability to accurately enter alphanumeric data.-Ability to be flexible working in multiple job locations within department.-Demonstrated ability of being a self-starter -Ability to work independently and with a teamEducation:Associate or equivalent experienceExperience:1-4 yearsQualifications:-Previous order entry experience/Customer and data management-Previous product knowledge-Knowledge of returned goods processes and procedures-Knowledge of SAP/ERP system-Forklift/PIV experience Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is responsible for properly creating and processing a service return order for a customer returned product, as well as the shipping of repaired product, Loaners, and Exchanges. This process is completed in accordance with quality requirements and time guidelines based on each product. All responsibilities are in support of the company's commitment to customer satisfaction.Responsibilities:-Identify the proper method for disposition of returned product-Verify customer account-Accurately create and fully process sales order -Properly generate invoice for returned product -Correctly administer inventory reductions of service parts used on product-Appropriately administer payment method for repairs completed-Receiving, shipping, and coordination of Vendor repair processes-Closing and preparation of shipments for tickets for repairs, loaners, and exchanges-Pick and ship repair products, loaner and exchange orders-Communicate within the department, with support departments and with external customers and suppliers-Ensure that products are properly serviced and/or returned to customer within time guidelines set by department supervisor-Continually comply with updated service return methodsWorking hours: 8:00 AM - 4:30 PMSkills:-Ability to accurately enter alphanumeric data.-Ability to be flexible working in multiple job locations within department.-Demonstrated ability of being a self-starter -Ability to work independently and with a teamEducation:Associate or equivalent experienceExperience:1-4 yearsQualifications:-Previous order entry experience/Customer and data management-Previous product knowledge-Knowledge of returned goods processes and procedures-Knowledge of SAP/ERP system-Forklift/PIV experience Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $24.99 per hour
      • 6:00 PM - 6:00 AM
      Work for a company that was voted best place to work in Southern MN in 2022! They are expanding and looking for a Shift Lead Mechanic on nights.Position Overview: Provide immediate trouble-shooting and maintenance support to all production team members and equipment as well as provide other assistance as needed.Night Shift - 6:00 PM - 6:00 AM (work 4 days on, 4 days off)TOTAL COMPENSATION PACKAGE-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and 10 holidays-FREE Employee Coverage: Health, Dental, Vision, Life Insurance-401K with company match, Funded Pension Plan and Stock Purchase Plan-Company short-term disability with optional long-term disabilityResponsibilities:-Perform the essential functions and provide technical support for the Front, Back and End Line Maintainer, depending on the area of assigned responsibilities.-Assist the team leader in the smooth operation of the facility.-Operate, trouble-shoot and perform required maintenance on all plant equipment and systems as assigned by Team Leaders and/or F.E. or B.E. Coordinators.-Complete required documentation on machine maintenance and quality checks.-Assist in other areas as needed to maintain smooth can flow through the plant.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Act as the team leader during supervisor absences to ensure that work and resources are adequately scheduled.-Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:-Previous experience as a leader-Previous work experience in Maintenance, Repair on Industrial Machines-Highly skilled MechanicEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Thorough knowledge and understanding of can and end manufacturing process, equipment, and quality specifications.-Ability to demonstrate mechanical aptitude on all can and end making equipment in the plant, depending on the primary, depending on the primary area of responsibility assigned.-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a company that was voted best place to work in Southern MN in 2022! They are expanding and looking for a Shift Lead Mechanic on nights.Position Overview: Provide immediate trouble-shooting and maintenance support to all production team members and equipment as well as provide other assistance as needed.Night Shift - 6:00 PM - 6:00 AM (work 4 days on, 4 days off)TOTAL COMPENSATION PACKAGE-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and 10 holidays-FREE Employee Coverage: Health, Dental, Vision, Life Insurance-401K with company match, Funded Pension Plan and Stock Purchase Plan-Company short-term disability with optional long-term disabilityResponsibilities:-Perform the essential functions and provide technical support for the Front, Back and End Line Maintainer, depending on the area of assigned responsibilities.-Assist the team leader in the smooth operation of the facility.-Operate, trouble-shoot and perform required maintenance on all plant equipment and systems as assigned by Team Leaders and/or F.E. or B.E. Coordinators.-Complete required documentation on machine maintenance and quality checks.-Assist in other areas as needed to maintain smooth can flow through the plant.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Act as the team leader during supervisor absences to ensure that work and resources are adequately scheduled.-Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:-Previous experience as a leader-Previous work experience in Maintenance, Repair on Industrial Machines-Highly skilled MechanicEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Thorough knowledge and understanding of can and end manufacturing process, equipment, and quality specifications.-Ability to demonstrate mechanical aptitude on all can and end making equipment in the plant, depending on the primary, depending on the primary area of responsibility assigned.-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    Explore over 8 jobs in Waseca

    It looks like you want to switch your language. This will reset your filters on your current job search.