You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    28 jobs found in Albert Lea, Minnesota

    Filter2
    Clear all
      • Albert Lea, Minnesota
      • Permanent
      • $16.50 per hour
      • 11:00 PM - 7:30 AM
      Entry Level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. Must be willing to shift and work in other areas when needed! Responsible for keeping work area cleaned and organized during and after shift. Must Be: Must Be Able To: Able to ask questions if not fully understanding instructions. Able to identify and report any problems quickly if there are issues with the parts that are being produced so the problem can quickly be fixed before resuming production of poor quality parts. Able to read and clearly understand Specifications Instruction Booklets provided for each part being made. Physical Demands: Mathematical Skills: Competencies: Must be able to demonstrate the following competencies. Analytical ??? Collects and researches all data provided. Design ??? Demonstrates attention to detail. Problem Solving ??? Identifies and resolves problems in a timely manner.Oral Communication ??? Listens and gets clarification.Written Communication ??? Able to read and interpret written information.Quality ??? Demonstrates accuracy and thoroughness, monitors own work to ensure quality. Quantity ??? Meets productivity Standards, Completes work timely. Strives to increase productivity. Works quickly.Safety ??? Observes safety, and reports potentially unsafe conditions.Attendance/Punctuality ??? Is consistently at work and on time.Dependable ??? Follows instructions, responds to management direction. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry Level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. Must be willing to shift and work in other areas when needed! Responsible for keeping work area cleaned and organized during and after shift. Must Be: Must Be Able To: Able to ask questions if not fully understanding instructions. Able to identify and report any problems quickly if there are issues with the parts that are being produced so the problem can quickly be fixed before resuming production of poor quality parts. Able to read and clearly understand Specifications Instruction Booklets provided for each part being made. Physical Demands: Mathematical Skills: Competencies: Must be able to demonstrate the following competencies. Analytical ??? Collects and researches all data provided. Design ??? Demonstrates attention to detail. Problem Solving ??? Identifies and resolves problems in a timely manner.Oral Communication ??? Listens and gets clarification.Written Communication ??? Able to read and interpret written information.Quality ??? Demonstrates accuracy and thoroughness, monitors own work to ensure quality. Quantity ??? Meets productivity Standards, Completes work timely. Strives to increase productivity. Works quickly.Safety ??? Observes safety, and reports potentially unsafe conditions.Attendance/Punctuality ??? Is consistently at work and on time.Dependable ??? Follows instructions, responds to management direction. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 6:00 AM - 2:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:?Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.?Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.?Fabricate components from blueprints and verbal instructions.?Perform assignments in accordance with written quality procedures.?Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.?Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures?Employment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and quali
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:?Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.?Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.?Fabricate components from blueprints and verbal instructions.?Perform assignments in accordance with written quality procedures.?Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.?Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures?Employment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and quali
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 6:00 AM - 2:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:?Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.?Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.?Fabricate components from blueprints and verbal instructions.?Perform assignments in accordance with written quality procedures.?Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.?Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures?Employment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and quali
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:?Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.?Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.?Fabricate components from blueprints and verbal instructions.?Perform assignments in accordance with written quality procedures.?Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.?Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures?Employment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and quali
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 8:00 AM - 4:30 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 per hour
      • 6:00 AM - 2:30 PM
      Industrial PaintingResponsibilities:Spray paint a wide variety of parts with lacquers, enamel, and undercoats to produce flat, gloss, semi-gloss, wrinkle and suede finishes. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as a number of raised or depressed surfaces. Performs visual inspection of all material prior to painting. Thins and strains paints to required consistencies and viscosities to produce specified finishes and high-grade finish. Checks quality of paints and thinners. May operate baking oven and monitors temperatures and bake cycle times.Working hours: 6:00 AM - 2:30 PMSkills:Must have 1+ years of experience with powder and liquid industrial painting and understand the differences and application process. Attention to detail is critical. Must have the ability to take direction and work well with others. Must be able to work well in a team environment. Mechanically inclined.Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent and at least 18 years of age Pre-Employment screening ? includes a drug screen 100% Employee owned and it shows! Voted best place to work for many years! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability HRA 100% Employer Contribution FREE CLINIC Long Term Disability & Life Insurance 100% Employer Paid PTO Tuition Reimbursement Paid Holidays 401K and ESOP Profit SharingSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Industrial PaintingResponsibilities:Spray paint a wide variety of parts with lacquers, enamel, and undercoats to produce flat, gloss, semi-gloss, wrinkle and suede finishes. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as a number of raised or depressed surfaces. Performs visual inspection of all material prior to painting. Thins and strains paints to required consistencies and viscosities to produce specified finishes and high-grade finish. Checks quality of paints and thinners. May operate baking oven and monitors temperatures and bake cycle times.Working hours: 6:00 AM - 2:30 PMSkills:Must have 1+ years of experience with powder and liquid industrial painting and understand the differences and application process. Attention to detail is critical. Must have the ability to take direction and work well with others. Must be able to work well in a team environment. Mechanically inclined.Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent and at least 18 years of age Pre-Employment screening ? includes a drug screen 100% Employee owned and it shows! Voted best place to work for many years! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability HRA 100% Employer Contribution FREE CLINIC Long Term Disability & Life Insurance 100% Employer Paid PTO Tuition Reimbursement Paid Holidays 401K and ESOP Profit SharingSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 5:30 AM
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:?Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. ?Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)?Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspections?Conducting Pre-Operational activities?Testing and evaluating raw material and finished product?Writing HOLD tags and assigning and/or assisting with the disposition of product?Reviewing finished production folders as part of the positive release program?Must maintain department safety rules compliance and be a positive safety role model. ?Responsible for ensuring an organized, clean and safe work environment.?Follow all Food safety practices and processes applicable to the department. ?Execute what is required by the company QMS.?Monitor and maintain all food safety activities as part of daily tasks.?Enforce food safety plan while producing product.?Promote food safety and quality to all departments?Support and assist the manufacturing teams to meet customer and product quality performance requirements. ?Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.?Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.?Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionWorking hours: 6:00 PM - 5:30 AMSkills:--Clear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.--Able to manage time and workload efficiently, and the ability to prioritize and modify priorities accordingly--Good safety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.--Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.--Able to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.--Demonstrate ability to work and develop others in a team environment--Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplace--Ability and willingness to learn, practice, and improve documented work procedures--Demonstrated ability to function in a fast-paced environment --Verbal and written communication skills sufficient to discuss, develop, and implement plans. --High sensitivity to quality and on time delivery of materials and servicesEducation:High SchoolExperience:0-1 yearsQualifications:?Experience with Microsoft Office, including Excel, Outlook, and Word ?Able to perform basic mathematical equations?Ability to adapt in a team and/or individual setting to allow achievement of company goals ?Established communication, problem solving, and attention to detail skills?Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.?Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements?PCQI and HACCP certified desired Temp to PERM!!! Once roll to PERM, wages increase to $18.50/HR!! PLUS AMAZING BENEFITS that include FREE Well@Work Clinic, Medical, Dental/Vision Ins, Medical Flex Spending Pan, Dependent Care, PTO and Holiday Pay, Retirement 401K match, Life Ins, ?and MORE!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:?Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. ?Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)?Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspections?Conducting Pre-Operational activities?Testing and evaluating raw material and finished product?Writing HOLD tags and assigning and/or assisting with the disposition of product?Reviewing finished production folders as part of the positive release program?Must maintain department safety rules compliance and be a positive safety role model. ?Responsible for ensuring an organized, clean and safe work environment.?Follow all Food safety practices and processes applicable to the department. ?Execute what is required by the company QMS.?Monitor and maintain all food safety activities as part of daily tasks.?Enforce food safety plan while producing product.?Promote food safety and quality to all departments?Support and assist the manufacturing teams to meet customer and product quality performance requirements. ?Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.?Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.?Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionWorking hours: 6:00 PM - 5:30 AMSkills:--Clear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.--Able to manage time and workload efficiently, and the ability to prioritize and modify priorities accordingly--Good safety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.--Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.--Able to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.--Demonstrate ability to work and develop others in a team environment--Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplace--Ability and willingness to learn, practice, and improve documented work procedures--Demonstrated ability to function in a fast-paced environment --Verbal and written communication skills sufficient to discuss, develop, and implement plans. --High sensitivity to quality and on time delivery of materials and servicesEducation:High SchoolExperience:0-1 yearsQualifications:?Experience with Microsoft Office, including Excel, Outlook, and Word ?Able to perform basic mathematical equations?Ability to adapt in a team and/or individual setting to allow achievement of company goals ?Established communication, problem solving, and attention to detail skills?Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.?Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements?PCQI and HACCP certified desired Temp to PERM!!! Once roll to PERM, wages increase to $18.50/HR!! PLUS AMAZING BENEFITS that include FREE Well@Work Clinic, Medical, Dental/Vision Ins, Medical Flex Spending Pan, Dependent Care, PTO and Holiday Pay, Retirement 401K match, Life Ins, ?and MORE!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 6:00 AM - 2:25 PM
      FLAVORING OPERATOR (Agglomeration) Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:?Basic mechanical aptitude by using machine specific tools.?Ability to work safely when learning the equipment and surroundings?Properly lock out and tag out equipment.?Good Manufacturing Practices (GMPs) and how to keep the product safe?Assist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.?Learn how to tear down equipment for cleaning?Learning how to assemble the equipment?Setting flow rates and starting equipment?Keeping up with equipment and product when running.Working hours: 6:00 AM - 2:25 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the ?Best Place to Work? many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $17 (1ST Shift) plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      FLAVORING OPERATOR (Agglomeration) Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:?Basic mechanical aptitude by using machine specific tools.?Ability to work safely when learning the equipment and surroundings?Properly lock out and tag out equipment.?Good Manufacturing Practices (GMPs) and how to keep the product safe?Assist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.?Learn how to tear down equipment for cleaning?Learning how to assemble the equipment?Setting flow rates and starting equipment?Keeping up with equipment and product when running.Working hours: 6:00 AM - 2:25 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the ?Best Place to Work? many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $17 (1ST Shift) plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 5:00 AM - 2:15 PM
      The candidate will spray paint a wide variety of parts with lacquers, enamel, and undercoats to produce flat, gloss, semi-gloss, wrinkle and suede finishes.Responsibilities:Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as a number of raised or depressed surfaces. Performs visual inspection of all material prior to painting. Thins and strains paints to required consistencies and viscosities to produce specified finishes and high-grade finish. Checks quality of paints and thinners. May operate baking oven and monitors temperatures and bake cycle times.Working hours: 5:00 AM - 2:15 PMSkills:--Must have 1+ years of experience with powder and liquid industrial painting and understand the differences and application process.--Attention to detail is critical.--Must have the ability to take direction and work well with others. --Mechanically inclined.Education:High SchoolExperience:0-1 yearsQualifications:???Requires a high school diploma or equivalent.???Requires passing a pre-employment screening, which includes a drug screen. *DIRECT HIRE* position with a 100% Employee Owned Company, and it shows!! BENEFITS, BENEFITS, BENEFITS!! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation and Sick Time, Tuition Reimbursement, Wellness Programs, Employee Assistance Programs, Paid Holidays, 401K and ESOP, Profit Sharing, and more!! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The candidate will spray paint a wide variety of parts with lacquers, enamel, and undercoats to produce flat, gloss, semi-gloss, wrinkle and suede finishes.Responsibilities:Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as a number of raised or depressed surfaces. Performs visual inspection of all material prior to painting. Thins and strains paints to required consistencies and viscosities to produce specified finishes and high-grade finish. Checks quality of paints and thinners. May operate baking oven and monitors temperatures and bake cycle times.Working hours: 5:00 AM - 2:15 PMSkills:--Must have 1+ years of experience with powder and liquid industrial painting and understand the differences and application process.--Attention to detail is critical.--Must have the ability to take direction and work well with others. --Mechanically inclined.Education:High SchoolExperience:0-1 yearsQualifications:???Requires a high school diploma or equivalent.???Requires passing a pre-employment screening, which includes a drug screen. *DIRECT HIRE* position with a 100% Employee Owned Company, and it shows!! BENEFITS, BENEFITS, BENEFITS!! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation and Sick Time, Tuition Reimbursement, Wellness Programs, Employee Assistance Programs, Paid Holidays, 401K and ESOP, Profit Sharing, and more!! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Tends machine that performs packaging operation.Responsibilities:Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 6:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $18.50/hr, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Tends machine that performs packaging operation.Responsibilities:Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 6:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $18.50/hr, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      The Warehouse Operator is responsible for receiving shipments, shipping orders, repalletization, inventory control, and Master Sanitation Cleaning. Must be knowledgeable and comply with all Quality Control (QC), Quality Assurance (QA), and good manufacturing practices (GMPs).Responsibilities:?Operate forklift as per operation guidelines to include safety procedures and guidelines?Inventory control in D365; read and understand lot numbers and scales; ensure all paperwork is complete (including time cards) in an accurate and timely manner; ensure documentation complies with SECS standards?Keep a neat, clean, and orderly work setting by completing the cleaning tasks as assigned; complete the Master Sanitation Schedule as necessary?Observe safety and security procedures, determine appropriate action beyond guidelines, and report potentially unsafe conditions?Monitor product quality to meet Company standards; report to Supervisor any deviation from scheduling or quality of service that may become a potential liability?Report to your Supervisor any failure to adhere to Balchem Corporation?s work ethics and standards?Perform other duties as assigned.?Adhere to all Company policies and procedures, i.e. personnel, safety, and equipment maintenance and upkeep?Become proficient in areas of production and safety policies and procedures (accident/injury reporting, blood borne pathogens, confined spaces, emergency evacuation, equipment operation/maintenance, hazard communication, ladders, lockout/tag out, personal protective equipment, etc.)Working hours: 6:00 PM - 6:30 AMSkills:--Computer literacy is required (prefer experience in warehouse inventory management systems, such as MRP/ERP)--Individual must be equipped with motivation, organization, time management, documentation, and communication skills (both orally and written)--Must have excellent attention to detail and have the ability to multi-task and prioritize--Individual should demonstrate work ethics (punctual, dependable, and trustworthy)--The ability to read and comprehend simple instructions, short correspondence, memos, and to write simple correspondence is also necessary--Individual must be able to pass any required examinations necessary to perform essential functions of the job--The ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization, as well as communicate and handle conflict in a professional manner is required--The ability to give and welcome feedback and contribute to building a positive team spirit is necessaryEducation:High SchoolExperience:0-1 yearsQualifications:WORKING CONDITIONS:?Individual will continually be required to stand, walk, use hands to finger, handle or feel, to talk and hear, and to utilize specific vision abilities including but not limited to close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus?Regularly required to climb, balance, stoop, kneel, crouch, and crawl, using proper ergonomic principles, taste, smell, and lift up to 25 pounds?Periodically required to lift up to and above 50 and 100 pounds, utilizing safe and proper lift techniques and equipment?Individual will rarely be required to sit?Individual will operate equipment, including but not limited to computers, drafting equipment and instruments involving scientific meters and measuring devices?The ability to distinguish colors is required?Anyone working in the plant or entering the plant must adhere to the personal protective equipment policies and procedures?All personal protective equipment furnished must be worn by all employees when required or needed to perform proper and safe working conditions?Individual may rarely be exposed to wet or humid conditions, working near moving mechanical parts, work in extreme heat (non-weather), work in high noise levels and vibration?Individual may also be periodically working in high or precarious places, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, and extreme cold (non-weather)Passing Drug Screen and Back Ground Pre-Employment screening CALL TO ACTION: Voted the Best Place to Work many years! TEMP-TO-PERMANENT POSITIONS! Once roll to Perm PAY IMMEDIATELY INCREASES by $1/HR plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Warehouse Operator is responsible for receiving shipments, shipping orders, repalletization, inventory control, and Master Sanitation Cleaning. Must be knowledgeable and comply with all Quality Control (QC), Quality Assurance (QA), and good manufacturing practices (GMPs).Responsibilities:?Operate forklift as per operation guidelines to include safety procedures and guidelines?Inventory control in D365; read and understand lot numbers and scales; ensure all paperwork is complete (including time cards) in an accurate and timely manner; ensure documentation complies with SECS standards?Keep a neat, clean, and orderly work setting by completing the cleaning tasks as assigned; complete the Master Sanitation Schedule as necessary?Observe safety and security procedures, determine appropriate action beyond guidelines, and report potentially unsafe conditions?Monitor product quality to meet Company standards; report to Supervisor any deviation from scheduling or quality of service that may become a potential liability?Report to your Supervisor any failure to adhere to Balchem Corporation?s work ethics and standards?Perform other duties as assigned.?Adhere to all Company policies and procedures, i.e. personnel, safety, and equipment maintenance and upkeep?Become proficient in areas of production and safety policies and procedures (accident/injury reporting, blood borne pathogens, confined spaces, emergency evacuation, equipment operation/maintenance, hazard communication, ladders, lockout/tag out, personal protective equipment, etc.)Working hours: 6:00 PM - 6:30 AMSkills:--Computer literacy is required (prefer experience in warehouse inventory management systems, such as MRP/ERP)--Individual must be equipped with motivation, organization, time management, documentation, and communication skills (both orally and written)--Must have excellent attention to detail and have the ability to multi-task and prioritize--Individual should demonstrate work ethics (punctual, dependable, and trustworthy)--The ability to read and comprehend simple instructions, short correspondence, memos, and to write simple correspondence is also necessary--Individual must be able to pass any required examinations necessary to perform essential functions of the job--The ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization, as well as communicate and handle conflict in a professional manner is required--The ability to give and welcome feedback and contribute to building a positive team spirit is necessaryEducation:High SchoolExperience:0-1 yearsQualifications:WORKING CONDITIONS:?Individual will continually be required to stand, walk, use hands to finger, handle or feel, to talk and hear, and to utilize specific vision abilities including but not limited to close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus?Regularly required to climb, balance, stoop, kneel, crouch, and crawl, using proper ergonomic principles, taste, smell, and lift up to 25 pounds?Periodically required to lift up to and above 50 and 100 pounds, utilizing safe and proper lift techniques and equipment?Individual will rarely be required to sit?Individual will operate equipment, including but not limited to computers, drafting equipment and instruments involving scientific meters and measuring devices?The ability to distinguish colors is required?Anyone working in the plant or entering the plant must adhere to the personal protective equipment policies and procedures?All personal protective equipment furnished must be worn by all employees when required or needed to perform proper and safe working conditions?Individual may rarely be exposed to wet or humid conditions, working near moving mechanical parts, work in extreme heat (non-weather), work in high noise levels and vibration?Individual may also be periodically working in high or precarious places, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, and extreme cold (non-weather)Passing Drug Screen and Back Ground Pre-Employment screening CALL TO ACTION: Voted the Best Place to Work many years! TEMP-TO-PERMANENT POSITIONS! Once roll to Perm PAY IMMEDIATELY INCREASES by $1/HR plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 3:00 PM - 1:15 AM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 3:00 PM - 1:15 AMSkills:--Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.--Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.--Fabricate components from blueprints and verbal instructions.--Perform assignments in accordance with written quality procedures.--Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.--Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! ?Medical & ST Disability?HRA ? 100% Employer Contribution, helps pay medical deductible?Free Clinic ? For employees and dependents?LT Disability & Life Insurance ? 100% Employer Paid
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 3:00 PM - 1:15 AMSkills:--Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.--Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.--Fabricate components from blueprints and verbal instructions.--Perform assignments in accordance with written quality procedures.--Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.--Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! ?Medical & ST Disability?HRA ? 100% Employer Contribution, helps pay medical deductible?Free Clinic ? For employees and dependents?LT Disability & Life Insurance ? 100% Employer Paid
      • Albert Lea, Minnesota
      • Permanent
      • $25.00 - $30.00 per hour
      • 7:00 AM - 3:30 PM
      Machinist-Tool Maker for a molded manufactured parts company.Responsibilities:Machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Machining skills.Mechanically inclined.Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling.CNC experience helpful but not required. Detail Oriented.Self Motivated.Dependable.Team Player.Education:No Degree RequiredExperience:1-4 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs.Able to work at a fast pace.Able to stand and walking all day.Able to work in a repetitive work environment.Able to add, subtract, multiply, and divide in all units of measure.Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Machinist-Tool Maker for a molded manufactured parts company.Responsibilities:Machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Machining skills.Mechanically inclined.Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling.CNC experience helpful but not required. Detail Oriented.Self Motivated.Dependable.Team Player.Education:No Degree RequiredExperience:1-4 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs.Able to work at a fast pace.Able to stand and walking all day.Able to work in a repetitive work environment.Able to add, subtract, multiply, and divide in all units of measure.Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.50 per hour
      • 3:00 PM - 11:00 PM
      Entry Level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:00 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. Must be willing to shift and work in other areas when needed! Responsible for keeping work area cleaned and organized during and after shift. Must Be: Must Be Able To: Able to ask questions if not fully understanding instructions. Able to identify and report any problems quickly if there are issues with the parts that are being produced so the problem can quickly be fixed before resuming production of poor quality parts. Able to read and clearly understand Specifications Instruction Booklets provided for each part being made. Physical Demands: Mathematical Skills: Competencies: Must be able to demonstrate the following competencies. Analytical ??? Collects and researches all data provided. Design ??? Demonstrates attention to detail. Problem Solving ??? Identifies and resolves problems in a timely manner.Oral Communication ??? Listens and gets clarification.Written Communication ??? Able to read and interpret written information.Quality ??? Demonstrates accuracy and thoroughness, monitors own work to ensure quality. Quantity ??? Meets productivity Standards, Completes work timely. Strives to increase productivity. Works quickly.Safety ??? Observes safety, and reports potentially unsafe conditions.Attendance/Punctuality ??? Is consistently at work and on time.Dependable ??? Follows instructions, responds to management direction. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry Level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:00 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. Must be willing to shift and work in other areas when needed! Responsible for keeping work area cleaned and organized during and after shift. Must Be: Must Be Able To: Able to ask questions if not fully understanding instructions. Able to identify and report any problems quickly if there are issues with the parts that are being produced so the problem can quickly be fixed before resuming production of poor quality parts. Able to read and clearly understand Specifications Instruction Booklets provided for each part being made. Physical Demands: Mathematical Skills: Competencies: Must be able to demonstrate the following competencies. Analytical ??? Collects and researches all data provided. Design ??? Demonstrates attention to detail. Problem Solving ??? Identifies and resolves problems in a timely manner.Oral Communication ??? Listens and gets clarification.Written Communication ??? Able to read and interpret written information.Quality ??? Demonstrates accuracy and thoroughness, monitors own work to ensure quality. Quantity ??? Meets productivity Standards, Completes work timely. Strives to increase productivity. Works quickly.Safety ??? Observes safety, and reports potentially unsafe conditions.Attendance/Punctuality ??? Is consistently at work and on time.Dependable ??? Follows instructions, responds to management direction. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 6:00 AM - 2:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:??? Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.??? Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.??? Fabricate components from blueprints and verbal instructions.??? Perform assignments in accordance with written quality procedures.??? Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.??? Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:--The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.--Must have welding experience and meet the skill level needed to fabricate quality products. --Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.--Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.--Individuals will work near moving mechanical parts of machinery and electrically activated devices. --Individuals are occasionally exposed to airborne particles.--Perform math skills of addition, subtraction, multiplication, and division--Knowledge of decimals, fractions, and metric/English conversions--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders--Lift and position parts into fixturesEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or equivalent.Pre-employment screening, which includes a drug screen. *DIRECT HIRE* with a 100% Employee Owned Company! AMAZING BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation and Sick Time, Tuition Reimbursement, Wellness Programs, Employee Assistance Programs, Paid Holidays, 401K and ESOP, Profit Sharing, and much more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:??? Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.??? Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.??? Fabricate components from blueprints and verbal instructions.??? Perform assignments in accordance with written quality procedures.??? Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.??? Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:--The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.--Must have welding experience and meet the skill level needed to fabricate quality products. --Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.--Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.--Individuals will work near moving mechanical parts of machinery and electrically activated devices. --Individuals are occasionally exposed to airborne particles.--Perform math skills of addition, subtraction, multiplication, and division--Knowledge of decimals, fractions, and metric/English conversions--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders--Lift and position parts into fixturesEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or equivalent.Pre-employment screening, which includes a drug screen. *DIRECT HIRE* with a 100% Employee Owned Company! AMAZING BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation and Sick Time, Tuition Reimbursement, Wellness Programs, Employee Assistance Programs, Paid Holidays, 401K and ESOP, Profit Sharing, and much more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $75,000 - $94,000 per year
      • 7:00 AM - 4:00 PM
      The Senior Controls Engineer is responsible for designing, developing, and maintaining electrical control systems for custom industrial deburring, parts washing, metal finishing machines and panel building equipment. In this position you will work on multiple equipment projects and be responsible for the electrical related aspects of each project, from design to installation and commissioning. We use SolidWorks and SolidWorks Electrical software to model various electrical components, enclosures, panel layouts and wiring schematics as needed for new designs and re-design of existing machines. Our Controls Engineer will work with various customer-submitted industrial equipment specifications as they relate to the electrical portion of the equipment order, write programmable logic controller (PLC) programs along with programs for operator touch screens that are used in the machines, inspect the electrical portion of used equipment that is returned for rebuild, confer with vendors and work with purchasing to specify electrical components needed for projects, and work with customers during equipment build and commissioning. You may have the opportunity to travel (domestically and internationally) in order to troubleshoot and service equipment in the field. The work environment is primarily an office position but does include factory work for commissioning and troubleshooting of equipment. Travel may be required to customer facilities to troubleshoot, program and modify equipment or to assist the customer's workers in doing so.Responsibilities:???Serve as a mentor to engineering and manufacturing team members assisting them with the design, panel building, PLC configuration and other areas of expertise.???Design functional electrical systems to meet customer specifications through the development and testing of various components.???Utilizes SolidWorks and other computer aided design techniques to perform design work. Uses SolidWorks Electrical to create and modify electrical schematics. ???Develop new PLC and HMI programs from scratch as required for equipment built for customer orders. ???Conduct detailed research of electrical equipment and systems and report findings.???Develop various testing methods and properties to confirm the functionality of components and systems.???Communicate engineering information with various stakeholders to facilitate successful completion of projects.???Performs a variety of engineering calculations using algebraic, trigonometric, and geometric formulas. ???Use standard product engineering data for the development of product configurations. ???Inspect equipment installations and observe operations to ensure compliance with design and equipment specifications ensuring all safety standards are met.???Participate in experimental manufacture and testing of finished product.Working hours: 7:00 AM - 4:00 PMSkills:--Excellent computer skills to include a working knowledge of Microsoft Office products.--Ability to analyze problems and select proper corrective action. --Excellent written and verbal communications.--Ability to organize tasks and work independently.--Previous experience mentoring preferred.Education:BachelorsExperience:1-4 yearsQualifications:???A degree in engineering, electrical engineering technology, design/drafting, controls, or related field.???A minimum of 3 years??? experience utilizing SolidWorks as a design program.???Extensive work experience in programming and troubleshooting of PLC???s (Allen-Bradley, Siemens, and others) and operator touch screens.???Previous experience in panel design required, with previous experience with panel building preferred.???Experience with three-phase industrial electrical system design and a general working knowledge of industri
      The Senior Controls Engineer is responsible for designing, developing, and maintaining electrical control systems for custom industrial deburring, parts washing, metal finishing machines and panel building equipment. In this position you will work on multiple equipment projects and be responsible for the electrical related aspects of each project, from design to installation and commissioning. We use SolidWorks and SolidWorks Electrical software to model various electrical components, enclosures, panel layouts and wiring schematics as needed for new designs and re-design of existing machines. Our Controls Engineer will work with various customer-submitted industrial equipment specifications as they relate to the electrical portion of the equipment order, write programmable logic controller (PLC) programs along with programs for operator touch screens that are used in the machines, inspect the electrical portion of used equipment that is returned for rebuild, confer with vendors and work with purchasing to specify electrical components needed for projects, and work with customers during equipment build and commissioning. You may have the opportunity to travel (domestically and internationally) in order to troubleshoot and service equipment in the field. The work environment is primarily an office position but does include factory work for commissioning and troubleshooting of equipment. Travel may be required to customer facilities to troubleshoot, program and modify equipment or to assist the customer's workers in doing so.Responsibilities:???Serve as a mentor to engineering and manufacturing team members assisting them with the design, panel building, PLC configuration and other areas of expertise.???Design functional electrical systems to meet customer specifications through the development and testing of various components.???Utilizes SolidWorks and other computer aided design techniques to perform design work. Uses SolidWorks Electrical to create and modify electrical schematics. ???Develop new PLC and HMI programs from scratch as required for equipment built for customer orders. ???Conduct detailed research of electrical equipment and systems and report findings.???Develop various testing methods and properties to confirm the functionality of components and systems.???Communicate engineering information with various stakeholders to facilitate successful completion of projects.???Performs a variety of engineering calculations using algebraic, trigonometric, and geometric formulas. ???Use standard product engineering data for the development of product configurations. ???Inspect equipment installations and observe operations to ensure compliance with design and equipment specifications ensuring all safety standards are met.???Participate in experimental manufacture and testing of finished product.Working hours: 7:00 AM - 4:00 PMSkills:--Excellent computer skills to include a working knowledge of Microsoft Office products.--Ability to analyze problems and select proper corrective action. --Excellent written and verbal communications.--Ability to organize tasks and work independently.--Previous experience mentoring preferred.Education:BachelorsExperience:1-4 yearsQualifications:???A degree in engineering, electrical engineering technology, design/drafting, controls, or related field.???A minimum of 3 years??? experience utilizing SolidWorks as a design program.???Extensive work experience in programming and troubleshooting of PLC???s (Allen-Bradley, Siemens, and others) and operator touch screens.???Previous experience in panel design required, with previous experience with panel building preferred.???Experience with three-phase industrial electrical system design and a general working knowledge of industri
      • Albert Lea, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 6:00 AM - 6:30 PM
      The Warehouse Operator is responsible for receiving shipments, shipping orders, repalletization, inventory control, and Master Sanitation Cleaning. Must be knowledgeable and comply with all Quality Control (QC), Quality Assurance (QA), and good manufacturing practices (GMPs).Responsibilities:?Operate forklift as per operation guidelines to include safety procedures and guidelines?Inventory control in D365; read and understand lot numbers and scales; ensure all paperwork is complete (including time cards) in an accurate and timely manner; ensure documentation complies with SECS standards?Keep a neat, clean, and orderly work setting by completing the cleaning tasks as assigned; complete the Master Sanitation Schedule as necessary?Observe safety and security procedures, determine appropriate action beyond guidelines, and report potentially unsafe conditions?Monitor product quality to meet Company standards; report to Supervisor any deviation from scheduling or quality of service that may become a potential liability?Report to your Supervisor any failure to adhere to the Corporation?s work ethics and standards?Perform other duties as assigned.?Adhere to all Company policies and procedures, i.e. personnel, safety, and equipment maintenance and upkeep?Become proficient in areas of production and safety policies and procedures (accident/injury reporting, blood borne pathogens, confined spaces, emergency evacuation, equipment operation/maintenance, hazard communication, ladders, lockout/tag out, personal protective equipment, etc.)Working hours: 6:00 AM - 6:30 PMSkills:--Computer literacy is required (prefer experience in warehouse inventory management systems, such as MRP/ERP)--Individual must be equipped with motivation, organization, time management, documentation, and communication skills (both orally and written)--Must have excellent attention to detail and have the ability to multi-task and prioritize--Individual should demonstrate work ethics (punctual, dependable, and trustworthy)--The ability to read and comprehend simple instructions, short correspondence, memos, and to write simple correspondence is also necessary--Individual must be able to pass any required examinations necessary to perform essential functions of the job--The ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization, as well as communicate and handle conflict in a professional manner is required--The ability to give and welcome feedback and contribute to building a positive team spirit is necessaryEducation:High SchoolExperience:0-1 yearsQualifications:?Individual will continually be required to stand, walk, use hands to finger, handle or feel, to talk and hear, and to utilize specific vision abilities including but not limited to close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus?Regularly required to climb, balance, stoop, kneel, crouch, and crawl, using proper ergonomic principles, taste, smell, and lift up to 25 pounds?Periodically required to lift up to and above 50 and 100 pounds, utilizing safe and proper lift techniques and equipment?Individual will rarely be required to sit?Individual will operate equipment, including but not limited to computers, drafting equipment and instruments involving scientific meters and measuring devices?The ability to distinguish colors is required?Requires anyone working in the plant or entering the plant must adhere to the personal protective equipment policies and procedures?All personal protective equipment furnished must be worn by all employees when required or needed to perform proper and safe working conditions?Individual may rarely be exposed to wet or humid conditions, working near moving mechanical parts, work in extreme heat (non-weather), work in high noise levels and vibration?Individual may also be periodically working in high or precarious places, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, and extreme cold (non-weather)Passing Drug Screen and Background Pre-Employment Screening Voted the Best Place to Work many years! TEMP-TO-PERMANENT POSITIONS! Once roll to Perm PAY IMMEDIATELY INCREASES by $1/HR plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Warehouse Operator is responsible for receiving shipments, shipping orders, repalletization, inventory control, and Master Sanitation Cleaning. Must be knowledgeable and comply with all Quality Control (QC), Quality Assurance (QA), and good manufacturing practices (GMPs).Responsibilities:?Operate forklift as per operation guidelines to include safety procedures and guidelines?Inventory control in D365; read and understand lot numbers and scales; ensure all paperwork is complete (including time cards) in an accurate and timely manner; ensure documentation complies with SECS standards?Keep a neat, clean, and orderly work setting by completing the cleaning tasks as assigned; complete the Master Sanitation Schedule as necessary?Observe safety and security procedures, determine appropriate action beyond guidelines, and report potentially unsafe conditions?Monitor product quality to meet Company standards; report to Supervisor any deviation from scheduling or quality of service that may become a potential liability?Report to your Supervisor any failure to adhere to the Corporation?s work ethics and standards?Perform other duties as assigned.?Adhere to all Company policies and procedures, i.e. personnel, safety, and equipment maintenance and upkeep?Become proficient in areas of production and safety policies and procedures (accident/injury reporting, blood borne pathogens, confined spaces, emergency evacuation, equipment operation/maintenance, hazard communication, ladders, lockout/tag out, personal protective equipment, etc.)Working hours: 6:00 AM - 6:30 PMSkills:--Computer literacy is required (prefer experience in warehouse inventory management systems, such as MRP/ERP)--Individual must be equipped with motivation, organization, time management, documentation, and communication skills (both orally and written)--Must have excellent attention to detail and have the ability to multi-task and prioritize--Individual should demonstrate work ethics (punctual, dependable, and trustworthy)--The ability to read and comprehend simple instructions, short correspondence, memos, and to write simple correspondence is also necessary--Individual must be able to pass any required examinations necessary to perform essential functions of the job--The ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization, as well as communicate and handle conflict in a professional manner is required--The ability to give and welcome feedback and contribute to building a positive team spirit is necessaryEducation:High SchoolExperience:0-1 yearsQualifications:?Individual will continually be required to stand, walk, use hands to finger, handle or feel, to talk and hear, and to utilize specific vision abilities including but not limited to close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus?Regularly required to climb, balance, stoop, kneel, crouch, and crawl, using proper ergonomic principles, taste, smell, and lift up to 25 pounds?Periodically required to lift up to and above 50 and 100 pounds, utilizing safe and proper lift techniques and equipment?Individual will rarely be required to sit?Individual will operate equipment, including but not limited to computers, drafting equipment and instruments involving scientific meters and measuring devices?The ability to distinguish colors is required?Requires anyone working in the plant or entering the plant must adhere to the personal protective equipment policies and procedures?All personal protective equipment furnished must be worn by all employees when required or needed to perform proper and safe working conditions?Individual may rarely be exposed to wet or humid conditions, working near moving mechanical parts, work in extreme heat (non-weather), work in high noise levels and vibration?Individual may also be periodically working in high or precarious places, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, and extreme cold (non-weather)Passing Drug Screen and Background Pre-Employment Screening Voted the Best Place to Work many years! TEMP-TO-PERMANENT POSITIONS! Once roll to Perm PAY IMMEDIATELY INCREASES by $1/HR plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 3:00 PM - 11:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 11:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualificatio
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 11:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualificatio
      • Albert Lea, Minnesota
      • Permanent
      • $16.50 per hour
      • 7:00 AM - 3:30 PM
      Entry Level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 7:00 AM - 3:30 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry Level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 7:00 AM - 3:30 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 5:30 AM
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:?Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. ?Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)?Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspections?Conducting Pre-Operational activities?Testing and evaluating raw material and finished product?Writing HOLD tags and assigning and/or assisting with the disposition of product?Reviewing finished production folders as part of the positive release program?Must maintain department safety rules compliance and be a positive safety role model. ?Responsible for ensuring an organized, clean and safe work environment.?Follow all Food safety practices and processes applicable to the department. ?Execute what is required by the company QMS.?Monitor and maintain all food safety activities as part of daily tasks.?Enforce food safety plan while producing product.?Promote food safety and quality to all departments?Support and assist the manufacturing teams to meet customer and product quality performance requirements. ?Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.?Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.?Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionWorking hours: 6:00 PM - 5:30 AMSkills:--Clear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.--Able to manage time and workload efficiently, and the ability to prioritize and modify priorities accordingly--Good safety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.--Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.--Able to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.--Demonstrate ability to work and develop others in a team environment--Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplace--Ability and willingness to learn, practice, and improve documented work procedures--Demonstrated ability to function in a fast-paced environment --Verbal and written communication skills sufficient to discuss, develop, and implement plans. --High sensitivity to quality and on time delivery of materials and servicesEducation:High SchoolExperience:0-1 yearsQualifications:?Experience with Microsoft Office, including Excel, Outlook, and Word ?Able to perform basic mathematical equations?Ability to adapt in a team and/or individual setting to allow achievement of company goals ?Established communication, problem solving, and attention to detail skills?Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.?Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements?PCQI and HACCP certified desired Temp to PERM!!! Once roll to PERM, wages increase to $18.50/HR!! PLUS AMAZING BENEFITS that include FREE Well@Work Clinic, Medical, Dental/Vision Ins, Medical Flex Spending Pan, Dependent Care, PTO and Holiday Pay, Retirement 401K match, Life Ins, ?and MORE!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:?Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. ?Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)?Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspections?Conducting Pre-Operational activities?Testing and evaluating raw material and finished product?Writing HOLD tags and assigning and/or assisting with the disposition of product?Reviewing finished production folders as part of the positive release program?Must maintain department safety rules compliance and be a positive safety role model. ?Responsible for ensuring an organized, clean and safe work environment.?Follow all Food safety practices and processes applicable to the department. ?Execute what is required by the company QMS.?Monitor and maintain all food safety activities as part of daily tasks.?Enforce food safety plan while producing product.?Promote food safety and quality to all departments?Support and assist the manufacturing teams to meet customer and product quality performance requirements. ?Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.?Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.?Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionWorking hours: 6:00 PM - 5:30 AMSkills:--Clear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.--Able to manage time and workload efficiently, and the ability to prioritize and modify priorities accordingly--Good safety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.--Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.--Able to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.--Demonstrate ability to work and develop others in a team environment--Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplace--Ability and willingness to learn, practice, and improve documented work procedures--Demonstrated ability to function in a fast-paced environment --Verbal and written communication skills sufficient to discuss, develop, and implement plans. --High sensitivity to quality and on time delivery of materials and servicesEducation:High SchoolExperience:0-1 yearsQualifications:?Experience with Microsoft Office, including Excel, Outlook, and Word ?Able to perform basic mathematical equations?Ability to adapt in a team and/or individual setting to allow achievement of company goals ?Established communication, problem solving, and attention to detail skills?Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.?Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements?PCQI and HACCP certified desired Temp to PERM!!! Once roll to PERM, wages increase to $18.50/HR!! PLUS AMAZING BENEFITS that include FREE Well@Work Clinic, Medical, Dental/Vision Ins, Medical Flex Spending Pan, Dependent Care, PTO and Holiday Pay, Retirement 401K match, Life Ins, ?and MORE!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.25 per hour
      • 2:00 PM - 10:30 PM
      FLAVORING OPERATOR (Agglomeration) Job Summary: Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 2:00 PM - 10:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.25, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      FLAVORING OPERATOR (Agglomeration) Job Summary: Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 2:00 PM - 10:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.25, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 8:00 AM - 4:30 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 7:00 AM - 3:15 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
      • Northwood, Iowa
      • Permanent
      • $18.11 - $22.05 per hour
      • 6:00 AM - 4:30 PM
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $20.50 - $22.00 per hour
      • 6:00 AM - 4:00 PM
      Industrial PainterResponsibilities:Using paint guns to uniformly coat metal products for customers.Working hours: 6:00 AM - 4:00 PMSkills:Background in painting products for customers with paint gunEducation:High SchoolExperience:1-4 yearsQualifications:Ability to lift 50 lbs.Ability to pass a drug and alcohol screenPunctualDependable Direct Hire with a locally owned company! Great Benefits:-401(k) matching-Employee discount-Health insurance-Health savings account-Life insurance-Paid time off-Retirement planSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Industrial PainterResponsibilities:Using paint guns to uniformly coat metal products for customers.Working hours: 6:00 AM - 4:00 PMSkills:Background in painting products for customers with paint gunEducation:High SchoolExperience:1-4 yearsQualifications:Ability to lift 50 lbs.Ability to pass a drug and alcohol screenPunctualDependable Direct Hire with a locally owned company! Great Benefits:-401(k) matching-Employee discount-Health insurance-Health savings account-Life insurance-Paid time off-Retirement planSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $17.50 - $19.00 per hour
      • 6:00 AM - 4:00 PM
      Laborers assist welders in all aspects of fabrication and assembly in shop and field site work areas. And assist painters and bead blasters in prepping/coating projects.Responsibilities:Operate all hand/automated tools including tape measure, steel square, wrenches, ratchets, grinders, chop saws, come-a-longs, jacks, chain hoists, clamps, welding dogs & pad-eyes, etc.Lay out, position, and secure parts and assemblies using hoists, pry bars, wrenches, hammer, and wedges as directed.Remove rough spots, slag, etc. from work piece, using portable grinder, wire brush, hand file, bench grinder, wire wheel, etc.Lift, move, transport steel parts using hydraulic lifts, plate clamps, chain hoists, dollies and hand carts.Observe and follows all company safety rules and regulations.Clean and maintain an orderly work area.Work well with others to ensure quality of work while maintaining scheduling demands.Performs other miscellaneous tasks as directed by management.Working hours: 6:00 AM - 4:00 PMSkills:Ability to communicate both verbally as well as through written communication.Reliable and punctual.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to lift 50 pounds.Must possess adequate sight, hearing and use of limbs for all aspects of job.Able to work for periods of time while kneeling, crouching, crawling, climbing steps as well as the ability to work from a ladder.Ability to pass a drug and alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical, $1,200yr HSA, and more. HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Laborers assist welders in all aspects of fabrication and assembly in shop and field site work areas. And assist painters and bead blasters in prepping/coating projects.Responsibilities:Operate all hand/automated tools including tape measure, steel square, wrenches, ratchets, grinders, chop saws, come-a-longs, jacks, chain hoists, clamps, welding dogs & pad-eyes, etc.Lay out, position, and secure parts and assemblies using hoists, pry bars, wrenches, hammer, and wedges as directed.Remove rough spots, slag, etc. from work piece, using portable grinder, wire brush, hand file, bench grinder, wire wheel, etc.Lift, move, transport steel parts using hydraulic lifts, plate clamps, chain hoists, dollies and hand carts.Observe and follows all company safety rules and regulations.Clean and maintain an orderly work area.Work well with others to ensure quality of work while maintaining scheduling demands.Performs other miscellaneous tasks as directed by management.Working hours: 6:00 AM - 4:00 PMSkills:Ability to communicate both verbally as well as through written communication.Reliable and punctual.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to lift 50 pounds.Must possess adequate sight, hearing and use of limbs for all aspects of job.Able to work for periods of time while kneeling, crouching, crawling, climbing steps as well as the ability to work from a ladder.Ability to pass a drug and alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical, $1,200yr HSA, and more. HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $27.00 - $30.00 per hour
      • 6:00 AM - 4:00 PM
      Structural Steel Detailer - DrafterResponsibilities:Drafter transfers information off contract documents/governing codes and draft them in shop drawing format.Working hours: 6:00 AM - 4:00 PMSkills:Proficient at reading and understanding prints and specifications.Knowledgeable in AISC Standard connections, charts and code of standard practices.Knowledgeable in IBC, OSHA, NAAMM, NOMMA, ASTM, and ANSI Codes.Knowledgeable in AWS Welding symbols.Familiar with standard steel shapes and sizes.Good working knowledge of steel joists and deck.Education:No Degree RequiredExperience:1-4 yearsQualifications:Competent at using AutoCAD 2014, SDS2, Microsoft Office, and Adobe.Must be neat, punctual, dependable, have attention to details, follow instructions, work under pressure, organized, able to multi-task and willing to learn.Should be able to make changes to shop drawings and follow through with the changes completely.Ability to pass a drug/alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant: Company 30%, empl 70%. To offset the deductible, company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Structural Steel Detailer - DrafterResponsibilities:Drafter transfers information off contract documents/governing codes and draft them in shop drawing format.Working hours: 6:00 AM - 4:00 PMSkills:Proficient at reading and understanding prints and specifications.Knowledgeable in AISC Standard connections, charts and code of standard practices.Knowledgeable in IBC, OSHA, NAAMM, NOMMA, ASTM, and ANSI Codes.Knowledgeable in AWS Welding symbols.Familiar with standard steel shapes and sizes.Good working knowledge of steel joists and deck.Education:No Degree RequiredExperience:1-4 yearsQualifications:Competent at using AutoCAD 2014, SDS2, Microsoft Office, and Adobe.Must be neat, punctual, dependable, have attention to details, follow instructions, work under pressure, organized, able to multi-task and willing to learn.Should be able to make changes to shop drawings and follow through with the changes completely.Ability to pass a drug/alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant: Company 30%, empl 70%. To offset the deductible, company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $27.00 - $30.00 per hour
      • 6:00 AM - 4:00 PM
      Structural Steel Detailer - DrafterResponsibilities:Drafter transfers information off contract documents/governing codes and draft them in shop drawing format.Working hours: 6:00 AM - 4:00 PMSkills:Proficient at reading and understanding prints and specifications.Knowledgeable in AISC Standard connections, charts and code of standard practices.Knowledgeable in IBC, OSHA, NAAMM, NOMMA, ASTM, and ANSI Codes.Knowledgeable in AWS Welding symbols.Familiar with standard steel shapes and sizes.Good working knowledge of steel joists and deck.Education:No Degree RequiredExperience:1-4 yearsQualifications:Competent at using AutoCAD 2014, SDS2, Microsoft Office, and Adobe.Must be neat, punctual, dependable, have attention to details, follow instructions, work under pressure, organized, able to multi-task and willing to learn.Should be able to make changes to shop drawings and follow through with the changes completely.Ability to pass a drug/alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant: Company 30%, empl 70%. To offset the deductible, company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Structural Steel Detailer - DrafterResponsibilities:Drafter transfers information off contract documents/governing codes and draft them in shop drawing format.Working hours: 6:00 AM - 4:00 PMSkills:Proficient at reading and understanding prints and specifications.Knowledgeable in AISC Standard connections, charts and code of standard practices.Knowledgeable in IBC, OSHA, NAAMM, NOMMA, ASTM, and ANSI Codes.Knowledgeable in AWS Welding symbols.Familiar with standard steel shapes and sizes.Good working knowledge of steel joists and deck.Education:No Degree RequiredExperience:1-4 yearsQualifications:Competent at using AutoCAD 2014, SDS2, Microsoft Office, and Adobe.Must be neat, punctual, dependable, have attention to details, follow instructions, work under pressure, organized, able to multi-task and willing to learn.Should be able to make changes to shop drawings and follow through with the changes completely.Ability to pass a drug/alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant: Company 30%, empl 70%. To offset the deductible, company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Blooming Prairie, Minnesota
      • Permanent
      • $20.00 - $23.00 per hour
      • 7:00 AM - 4:00 PM
      The Scheduling and Engineering Coordinator will have a wide range of responsibilities. The role will require a flexible and dynamic person who is patient and yet, assertive. Solid interpersonal skills will help you maneuver the complexities of the role. Most of all, employees are there to support each other and have fun.Responsibilities:Maintain billing and routings on front end process.Coordinate scheduling workflow for multiple products.Assist with helping at the front when needed.Clerical responsibilities.Accepts other duties and assumes other responsibilities as assigned or as need becomes apparentWorking hours: 7:00 AM - 4:00 PMSkills:--Proficient in Excel: formulas, pivot tables, charts and graphs--Familiar with Bill of Materials and Routing--Familiar with cycle counting--Able to demonstrate and keep quality standards--Solid communication skills and ability to work with others to get results.--Able to work independently and as a team while handle multiple priorities.--Ability to multi-task with ability to prioritize.Education:AssociateExperience:1-4 yearsQualifications:Associate (Preferred)Manufacturing: 1 year (Preferred)Microsoft Excel: 1 year (Preferred)Knowledge of Microsoft Business CentralTechnical Certificate: APIC?s preferred or the willingness to pursueTwo Year Technical Degree in Engineering/Supply Chain Management Great Company, apply today! Benefits:401(k)401(k) matchingDental insuranceEmployee discountHealth insuranceHealth savings accountLife insurancePaid time offReferral programRetirement planVision insuranceSchedule:8 hour shiftMonday to FridaySupplemental Pay:Bonus paySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Scheduling and Engineering Coordinator will have a wide range of responsibilities. The role will require a flexible and dynamic person who is patient and yet, assertive. Solid interpersonal skills will help you maneuver the complexities of the role. Most of all, employees are there to support each other and have fun.Responsibilities:Maintain billing and routings on front end process.Coordinate scheduling workflow for multiple products.Assist with helping at the front when needed.Clerical responsibilities.Accepts other duties and assumes other responsibilities as assigned or as need becomes apparentWorking hours: 7:00 AM - 4:00 PMSkills:--Proficient in Excel: formulas, pivot tables, charts and graphs--Familiar with Bill of Materials and Routing--Familiar with cycle counting--Able to demonstrate and keep quality standards--Solid communication skills and ability to work with others to get results.--Able to work independently and as a team while handle multiple priorities.--Ability to multi-task with ability to prioritize.Education:AssociateExperience:1-4 yearsQualifications:Associate (Preferred)Manufacturing: 1 year (Preferred)Microsoft Excel: 1 year (Preferred)Knowledge of Microsoft Business CentralTechnical Certificate: APIC?s preferred or the willingness to pursueTwo Year Technical Degree in Engineering/Supply Chain Management Great Company, apply today! Benefits:401(k)401(k) matchingDental insuranceEmployee discountHealth insuranceHealth savings accountLife insurancePaid time offReferral programRetirement planVision insuranceSchedule:8 hour shiftMonday to FridaySupplemental Pay:Bonus paySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.