The Machinist Apprentice will be responsible for loading & unloading parts in and out of a CNC Machines to ensure the parts are in compliance per the drawing and manufacturing inspection plan.Responsibilities:-First priority is keeping production parts loaded and unload in the assigned CNC machines per set-up instructions/work order. The expectation is to keep the spindles running making good parts on time without sacrificing quality. -Inspect parts per manufacturing inspection plan (MIP) and accurately record all results on the MIP document as parts come off the CNCs. -Tag and document all non-conformance parts per the AS9100 procedures/work instructions. -Clocking in and out of work order operations in ERP system (Global). Recording any scrap in ERP system. -Ensure that the shop floor is kept clean and professional. This includes but is not limited to: FOD prevention, putting tooling away, keeping work surfaces clean and organized, keeping CNC machines clean of chips, wiping oil/grease off machines, Sweeping/Mopping floor, general cleaning, putting away company inspection tools, and any other cleaning duty on shop floor per management. -Follow safety procedures and policies. -Ensure that all company guidelines are being followed as outlined in Employee Handbook.Working hours: Various Shifts AvailableSkills:-Understanding of CNC machines, machining, inspection and safety. -Ability to read and understand drawings, specifications and instructions, and communicate them in an understandable manner.-Understanding of production scheduling, and compliance. -Ability to communicate professionally with employees, customers, suppliers and members of industry.Education:High SchoolExperience:1-4 yearsQualifications:-Required: High School or GED equivalent level of applicable experience. -Preferred: Machining technical training by a trade school or college.-Ability to pass a background check and a drug test.-Must be able to lift up to 50lbs Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
The Machinist Apprentice will be responsible for loading & unloading parts in and out of a CNC Machines to ensure the parts are in compliance per the drawing and manufacturing inspection plan.Responsibilities:-First priority is keeping production parts loaded and unload in the assigned CNC machines per set-up instructions/work order. The expectation is to keep the spindles running making good parts on time without sacrificing quality. -Inspect parts per manufacturing inspection plan (MIP) and accurately record all results on the MIP document as parts come off the CNCs. -Tag and document all non-conformance parts per the AS9100 procedures/work instructions. -Clocking in and out of work order operations in ERP system (Global). Recording any scrap in ERP system. -Ensure that the shop floor is kept clean and professional. This includes but is not limited to: FOD prevention, putting tooling away, keeping work surfaces clean and organized, keeping CNC machines clean of chips, wiping oil/grease off machines, Sweeping/Mopping floor, general cleaning, putting away company inspection tools, and any other cleaning duty on shop floor per management. -Follow safety procedures and policies. -Ensure that all company guidelines are being followed as outlined in Employee Handbook.Working hours: Various Shifts AvailableSkills:-Understanding of CNC machines, machining, inspection and safety. -Ability to read and understand drawings, specifications and instructions, and communicate them in an understandable manner.-Understanding of production scheduling, and compliance. -Ability to communicate professionally with employees, customers, suppliers and members of industry.Education:High SchoolExperience:1-4 yearsQualifications:-Required: High School or GED equivalent level of applicable experience. -Preferred: Machining technical training by a trade school or college.-Ability to pass a background check and a drug test.-Must be able to lift up to 50lbs Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local manufacturing is seeking an experienced Quality Inspector. Will be responsible to perform inspections and other quality control functions in support of Manufacturing and Distribution in conformance with customer requirements. Perform and document inspections/verification's on product, components, and processes based upon specified requirements. Use of basic inspection equipment.Responsibilities:-Inspection of circular connectors-Inspection of components and cable assemblies-Inspection of complex cable and harness assemblies-Complete First Article Inspection in accordance AS9102-Incoming inspection of all product; Verification of documentation-Familiar with FOD, ESD and counterfeit part prevention measures.-Familiar with 6S, Best Practice and Lean Manufacturing.-Familiar with RMA processWorking hours: 7:00 AM - 3:00 PMSkills:-Ability to work with inspection equipment & follow instructions-Computer literate: Microsoft OfficeEducation:High SchoolExperience:1-4 yearsQualifications:-High School Diploma or equivalent-1-4 years of experience-Ability to interpret drawings, blueprints and technical documentation.-Knowledge in math and geometry-Must be able to pass a background check and drug test!-Background in military, aerospace or manufacturing desirable. Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local manufacturing is seeking an experienced Quality Inspector. Will be responsible to perform inspections and other quality control functions in support of Manufacturing and Distribution in conformance with customer requirements. Perform and document inspections/verification's on product, components, and processes based upon specified requirements. Use of basic inspection equipment.Responsibilities:-Inspection of circular connectors-Inspection of components and cable assemblies-Inspection of complex cable and harness assemblies-Complete First Article Inspection in accordance AS9102-Incoming inspection of all product; Verification of documentation-Familiar with FOD, ESD and counterfeit part prevention measures.-Familiar with 6S, Best Practice and Lean Manufacturing.-Familiar with RMA processWorking hours: 7:00 AM - 3:00 PMSkills:-Ability to work with inspection equipment & follow instructions-Computer literate: Microsoft OfficeEducation:High SchoolExperience:1-4 yearsQualifications:-High School Diploma or equivalent-1-4 years of experience-Ability to interpret drawings, blueprints and technical documentation.-Knowledge in math and geometry-Must be able to pass a background check and drug test!-Background in military, aerospace or manufacturing desirable. Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Are you looking for a great opportunity to work with a leading provider of precision machined components? Do you enjoy working with metal and creating a variety of specialty parts?IF SO, we currently have an exciting opportunity for the right Senior Machinist, to start almost immediately, on special projects and complex parts. The successful candidate will have exceptional knowledge of high precision machines and their capabilities.Responsibilities:-Plans, lays out work, sets up and operates all types of lathes, mills or grinders to machine or grind developmental, production or maintenance parts to exacting tolerances and dimensions.-Expected to mentor junior machinists.-Performs other duties as assigned or required.Working hours: 7:00 AM - 4:00 PMSkills:- Experience in GibbsCAM, MasterCAM or Esprit.- Working knowledge of G-Code- Big lathe and 5-axis experience a big plus- Strong math skill/proficient in GD&T- Must be customer focused and possess: -Ability to perform complex set-up and fabrication of machined parts with little or no direction; -In-depth knowledge of machining equipment including ability to use judgment and safe practices; -Ability to read, interpret and explain engineering drawings, sketches and verbal and written instructions; -Skills to maintain the flow of work within the unit using independent judgment in solving moderately to highly complex problems and recommend solutions.-Demonstrated verbal and written communication skills necessary to communicate tactfully and effectively in a technical environment and basic computer skills.-The ability to work both independently and lead in a team environment is essential as is the ability to work extended hours as required.Education:High SchoolExperience:10+ yearsQualifications:-Typically requires a High School Diploma, technical/trade school training or equivalent-10+ plus years related experience-Must be a US Citizen as defined by ITAR. Company offers a great benefit package and Pay is DOE!Apply online today at www.spherion.com/apply/75034 or contact us at 46-470-7300 for additional information.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Are you looking for a great opportunity to work with a leading provider of precision machined components? Do you enjoy working with metal and creating a variety of specialty parts?IF SO, we currently have an exciting opportunity for the right Senior Machinist, to start almost immediately, on special projects and complex parts. The successful candidate will have exceptional knowledge of high precision machines and their capabilities.Responsibilities:-Plans, lays out work, sets up and operates all types of lathes, mills or grinders to machine or grind developmental, production or maintenance parts to exacting tolerances and dimensions.-Expected to mentor junior machinists.-Performs other duties as assigned or required.Working hours: 7:00 AM - 4:00 PMSkills:- Experience in GibbsCAM, MasterCAM or Esprit.- Working knowledge of G-Code- Big lathe and 5-axis experience a big plus- Strong math skill/proficient in GD&T- Must be customer focused and possess: -Ability to perform complex set-up and fabrication of machined parts with little or no direction; -In-depth knowledge of machining equipment including ability to use judgment and safe practices; -Ability to read, interpret and explain engineering drawings, sketches and verbal and written instructions; -Skills to maintain the flow of work within the unit using independent judgment in solving moderately to highly complex problems and recommend solutions.-Demonstrated verbal and written communication skills necessary to communicate tactfully and effectively in a technical environment and basic computer skills.-The ability to work both independently and lead in a team environment is essential as is the ability to work extended hours as required.Education:High SchoolExperience:10+ yearsQualifications:-Typically requires a High School Diploma, technical/trade school training or equivalent-10+ plus years related experience-Must be a US Citizen as defined by ITAR. Company offers a great benefit package and Pay is DOE!Apply online today at www.spherion.com/apply/75034 or contact us at 46-470-7300 for additional information.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local Manufacturing Company seeking an Experienced CNC Machinist to join their 2nd shift crew.Responsibilities:-Experience with vertical & horizontal mills-Lathe experience with Okuma OSP controls-Setting up mill turn machining centers- Will be editing existing programs as needed-Comprehensive understanding of speeds & feeds for different materials-Set up & run multiple machines at the same timeWorking hours: 2:30 PM - 11:00 PMSkills:-Self Motivated-Must be reliable and dependable for you are working on 2nd Shift.Education:High SchoolExperience:1-4 yearsQualifications:-High school Diploma or Equivalent-Minimum of 2-5 years of machining/manufacturing experience-Strong GDT knowledge-Programming with Espirit knowledge Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local Manufacturing Company seeking an Experienced CNC Machinist to join their 2nd shift crew.Responsibilities:-Experience with vertical & horizontal mills-Lathe experience with Okuma OSP controls-Setting up mill turn machining centers- Will be editing existing programs as needed-Comprehensive understanding of speeds & feeds for different materials-Set up & run multiple machines at the same timeWorking hours: 2:30 PM - 11:00 PMSkills:-Self Motivated-Must be reliable and dependable for you are working on 2nd Shift.Education:High SchoolExperience:1-4 yearsQualifications:-High school Diploma or Equivalent-Minimum of 2-5 years of machining/manufacturing experience-Strong GDT knowledge-Programming with Espirit knowledge Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local Manufacturing company is seeking a connector assembler to assist them on a special project for 3-4 weeks. Seeking someone that has good hand eye coordination.Responsibilities:Will be using tweezers or pliers to place contacts (pins) in the inserts or connectors. Once contacts are loaded you then use a hand press to level contacts.Working hours: 7:00 AM - 3:30 PMSkills:-Good hand eye coordination-Ability to sit for 8 hours a day-Dependable & ReliableEducation:High SchoolExperience:0-1 yearsQualifications:-Ability to work independently-Back to pass a background check & drug test Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local Manufacturing company is seeking a connector assembler to assist them on a special project for 3-4 weeks. Seeking someone that has good hand eye coordination.Responsibilities:Will be using tweezers or pliers to place contacts (pins) in the inserts or connectors. Once contacts are loaded you then use a hand press to level contacts.Working hours: 7:00 AM - 3:30 PMSkills:-Good hand eye coordination-Ability to sit for 8 hours a day-Dependable & ReliableEducation:High SchoolExperience:0-1 yearsQualifications:-Ability to work independently-Back to pass a background check & drug test Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Position available working in a well established aerospace manufacturing organization in Butte Montana. Full-time position working Monday through Friday, 6:00 AM - 4:30 PM. Position has opportunity for long term depending on availability of position and performance.Responsibilities:Working in the wax pattern production for part manufacturing. Dynamic, fast paced manufacturing environment.Working hours: 6:00 AM - 4:30 PMSkills:Ability to work in a production environment with deadlines. Attention to detail critical. Must have adequate eye/hand coordination. Ability to follow tech cards to ensure quality control. Basic computer skills and communication skills, both written and verbal. Use of hand tools to patch, smooth and fill in areas according to specs for consistency. Attention to safety.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED. Ability to read/write/speak English. Pre-employment includes: drug screen, criminal background check, physical assessment. Must have three(3) work related references. To be considered, go to spherion.com/apply. Be sure to attach a detailed resume. For questions or assistance, contact the local Spherion Staffing and Recruiting office in Butte Montana at 406-782-1130 or visit us at 1015 A. South Montana Street. Let's Get To Work !!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Position available working in a well established aerospace manufacturing organization in Butte Montana. Full-time position working Monday through Friday, 6:00 AM - 4:30 PM. Position has opportunity for long term depending on availability of position and performance.Responsibilities:Working in the wax pattern production for part manufacturing. Dynamic, fast paced manufacturing environment.Working hours: 6:00 AM - 4:30 PMSkills:Ability to work in a production environment with deadlines. Attention to detail critical. Must have adequate eye/hand coordination. Ability to follow tech cards to ensure quality control. Basic computer skills and communication skills, both written and verbal. Use of hand tools to patch, smooth and fill in areas according to specs for consistency. Attention to safety.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED. Ability to read/write/speak English. Pre-employment includes: drug screen, criminal background check, physical assessment. Must have three(3) work related references. To be considered, go to spherion.com/apply. Be sure to attach a detailed resume. For questions or assistance, contact the local Spherion Staffing and Recruiting office in Butte Montana at 406-782-1130 or visit us at 1015 A. South Montana Street. Let's Get To Work !!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local manufacturing company is seeking a Full time Production Worker to work in the packaging & production area in the warehouse.Responsibilities:-Will be helping put stickers on bottles, installing holsters, putting clamp on, along with cards for business information. -Will be packaging finished product per job requests-Must have good math skills while working in the fill room for counts, measurements and mixes that require being able to read scales and compute weights for the mix -Will also be tracking and monitoring measured fills and using mathematics to adjust machine measures.-Other duties as assignedWorking hours: 2:00 PM - 10:00 PMSkills:-Seeking someone that is mechanically inclined-Has good math skills-Able to work in repetitive area-Must have dexterity to handle small components for product assembly-Able to work in a fast paced environment and is a team playerEducation:High SchoolExperience:1-4 yearsQualifications:-Highschool Diploma or Equivalent-Ability to be on your feet for 8 hours, lifting, turning, and able to push a pallet jacks & carts-Will be carrying up to 45 lbs-Prior production or warehouse experience a plus!-Able to pass a background & drug test Hours will be Monday-Friday either 2pm-10pm or 3pm-11pm.Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local manufacturing company is seeking a Full time Production Worker to work in the packaging & production area in the warehouse.Responsibilities:-Will be helping put stickers on bottles, installing holsters, putting clamp on, along with cards for business information. -Will be packaging finished product per job requests-Must have good math skills while working in the fill room for counts, measurements and mixes that require being able to read scales and compute weights for the mix -Will also be tracking and monitoring measured fills and using mathematics to adjust machine measures.-Other duties as assignedWorking hours: 2:00 PM - 10:00 PMSkills:-Seeking someone that is mechanically inclined-Has good math skills-Able to work in repetitive area-Must have dexterity to handle small components for product assembly-Able to work in a fast paced environment and is a team playerEducation:High SchoolExperience:1-4 yearsQualifications:-Highschool Diploma or Equivalent-Ability to be on your feet for 8 hours, lifting, turning, and able to push a pallet jacks & carts-Will be carrying up to 45 lbs-Prior production or warehouse experience a plus!-Able to pass a background & drug test Hours will be Monday-Friday either 2pm-10pm or 3pm-11pm.Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Are you mechanically inclined and like working in a production environment? If so, we have the job for you. Local growing manufacturing company is hiring for All Shifts. Seeking entry level candidates that are mechanically inclined that like working in a fast paced production environment. General Assembly Machine Operators work on variety of machine tools such as lathes, drills, milling machines, boring machines and grinders to cut, shape and fit parts to fabricate various parts of a firearm.Responsibilities:- Reads blueprint or job order for product specifications such as dimensions and tolerances, and tooling instructions.- Positions and secures work piece in holding device, machine table, chuck, centers, or fixtures.- Moves controls to position tool and work piece in relation to each other, and to set specified feeds, speeds, and depth of cut.- Starts machine, directs coolant or cutting oil flow, and feeds tool to work piece or vice versa, and engages feed.- Observes operation of machine and verifies conformance of machined work piece to specifications.- Grind, sand, clean, or polish objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools. Measure and mark equipment, objects, or parts to ensure standards are met. - Ensure that parts are machined to specifications and meets quality guidelines..Working hours: Various Shifts AvailableSkills:- Basic mechanical or metalworking skills a plus. - Knowledge and understanding of firearms and how they operate.- Demonstrated ability to utilize power and hand tools, including, but not limited to: drills, lathes, grinders, mills, or other metalworking tools. - Proven ability to complete tasks in a precise and accurate manner.- Demonstrated ability to communicate effectively with customers, co-workers, and supervisors.Education:High SchoolExperience:1-4 yearsQualifications:-High school diploma or equivalent required. Specialized training in metalworking or manufacturing preferred but not required!-Ability to lift/move up to 25 pounds and move up to 50 pounds-Ability to stand for 10 hours a day-Able to pass a background check. Current schedule available are:Dayshift: Monday -Thursday, 10 hour shifts (day shift 6:20am - 4:50pm)Evening shift: Monday-Thursday 10 hours shifts (4:40pm - 3:10am ) plus a shift differentialWeekend Shift: Friday -Sunday 12 hour shifts (weekend shift 6:00am - 6:30pm) plus a shift differentialHowever shift schedules may vary and require flexibility as demanded by business requirements.Apply online today at www.spherion.com/kalispell or email your resume to nikkidemars@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Are you mechanically inclined and like working in a production environment? If so, we have the job for you. Local growing manufacturing company is hiring for All Shifts. Seeking entry level candidates that are mechanically inclined that like working in a fast paced production environment. General Assembly Machine Operators work on variety of machine tools such as lathes, drills, milling machines, boring machines and grinders to cut, shape and fit parts to fabricate various parts of a firearm.Responsibilities:- Reads blueprint or job order for product specifications such as dimensions and tolerances, and tooling instructions.- Positions and secures work piece in holding device, machine table, chuck, centers, or fixtures.- Moves controls to position tool and work piece in relation to each other, and to set specified feeds, speeds, and depth of cut.- Starts machine, directs coolant or cutting oil flow, and feeds tool to work piece or vice versa, and engages feed.- Observes operation of machine and verifies conformance of machined work piece to specifications.- Grind, sand, clean, or polish objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools. Measure and mark equipment, objects, or parts to ensure standards are met. - Ensure that parts are machined to specifications and meets quality guidelines..Working hours: Various Shifts AvailableSkills:- Basic mechanical or metalworking skills a plus. - Knowledge and understanding of firearms and how they operate.- Demonstrated ability to utilize power and hand tools, including, but not limited to: drills, lathes, grinders, mills, or other metalworking tools. - Proven ability to complete tasks in a precise and accurate manner.- Demonstrated ability to communicate effectively with customers, co-workers, and supervisors.Education:High SchoolExperience:1-4 yearsQualifications:-High school diploma or equivalent required. Specialized training in metalworking or manufacturing preferred but not required!-Ability to lift/move up to 25 pounds and move up to 50 pounds-Ability to stand for 10 hours a day-Able to pass a background check. Current schedule available are:Dayshift: Monday -Thursday, 10 hour shifts (day shift 6:20am - 4:50pm)Evening shift: Monday-Thursday 10 hours shifts (4:40pm - 3:10am ) plus a shift differentialWeekend Shift: Friday -Sunday 12 hour shifts (weekend shift 6:00am - 6:30pm) plus a shift differentialHowever shift schedules may vary and require flexibility as demanded by business requirements.Apply online today at www.spherion.com/kalispell or email your resume to nikkidemars@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Do you enjoy working with your hands and assembling product? If so we are seeking several Full Assembly/ Full Builders. Will be operating hand tools, machining equipment and utilizing finishing material (sandpaper, etc.) to perform assembly and finishing work on gun components (primarily gun stocks).Responsibilities:-Reads blueprint or job order for product specifications such as dimensions and tolerances, and tooling instructions.-Positions and secures work piece in holding device, machine table, chuck, centers, or fixtures.-Operates machines and equipment other than machine tools.-Grinds, sands, cleans, or polishes objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools. Measure and mark equipment, objects, or parts to ensure standards are met. -Trims, scrapes, or deburrs objects or parts, using chisels, scrapers, and other hand tools and equipment. -Fills cracks or imperfections using appropriate compounds.-Applies special finishes for color and to prevent corrosion.-Record product and processing data and information on specified forms. -Set up and operates metalworking machines to cut, shape, and fit parts to machine various parts of a firearm.-Ensure that firearm is assembled to specifications and meets quality guidelines.Working hours: Various Shifts AvailableSkills:-Proven ability to complete tasks in a precise and accurate manner.-Demonstrated ability to utilize power and hand tools, including, but not limited to: drills, lathes, mills, grinders, sanders, or other wood and metalworking tools.Education:High SchoolExperience:0-1 yearsQualifications:-High school diploma or equivalent required. Specialized training in metalworking or manufacturing preferred.-Basic mechanical and wood/composite/metalworking skills required with high attention to detail. -Knowledge and understanding of firearms and how they operate.-Ability to stand for 10 hours a day-Ability to pass a background check Current schedule is Dayshift: Monday - Thursday, 10 hour shifts (day shift 6:00am - 4:30pm). Possible Evening shifts 4:40pm - 3:10am ), or Weekend Shift, Friday -Sunday 12 hour shifts (weekend shift 6:00am - 6:30pm)Pay is $15.00 an hour and shift differentials apply.Apply online today at www.spherion.com/kalispell or email your resume to nikkidemars@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Do you enjoy working with your hands and assembling product? If so we are seeking several Full Assembly/ Full Builders. Will be operating hand tools, machining equipment and utilizing finishing material (sandpaper, etc.) to perform assembly and finishing work on gun components (primarily gun stocks).Responsibilities:-Reads blueprint or job order for product specifications such as dimensions and tolerances, and tooling instructions.-Positions and secures work piece in holding device, machine table, chuck, centers, or fixtures.-Operates machines and equipment other than machine tools.-Grinds, sands, cleans, or polishes objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools. Measure and mark equipment, objects, or parts to ensure standards are met. -Trims, scrapes, or deburrs objects or parts, using chisels, scrapers, and other hand tools and equipment. -Fills cracks or imperfections using appropriate compounds.-Applies special finishes for color and to prevent corrosion.-Record product and processing data and information on specified forms. -Set up and operates metalworking machines to cut, shape, and fit parts to machine various parts of a firearm.-Ensure that firearm is assembled to specifications and meets quality guidelines.Working hours: Various Shifts AvailableSkills:-Proven ability to complete tasks in a precise and accurate manner.-Demonstrated ability to utilize power and hand tools, including, but not limited to: drills, lathes, mills, grinders, sanders, or other wood and metalworking tools.Education:High SchoolExperience:0-1 yearsQualifications:-High school diploma or equivalent required. Specialized training in metalworking or manufacturing preferred.-Basic mechanical and wood/composite/metalworking skills required with high attention to detail. -Knowledge and understanding of firearms and how they operate.-Ability to stand for 10 hours a day-Ability to pass a background check Current schedule is Dayshift: Monday - Thursday, 10 hour shifts (day shift 6:00am - 4:30pm). Possible Evening shifts 4:40pm - 3:10am ), or Weekend Shift, Friday -Sunday 12 hour shifts (weekend shift 6:00am - 6:30pm)Pay is $15.00 an hour and shift differentials apply.Apply online today at www.spherion.com/kalispell or email your resume to nikkidemars@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local Manufacturing Company is seeking an Experienced Quality Control CMM Programmer Inspector to join their team. The Quality Inspector supports incoming, in-process and outgoing part inspection of close tolerance parts to insure product meets customer's specifications.Responsibilities:-Programming and operation of CMM, Experience with Zeiss Calypso is a plus-Application of GD&T -Dimensional inspection of precision parts -Completing inspection reports-Final inspection reportingWorking hours: Various Shifts AvailableSkills:-Ability to convey dimensional findings to machine shop personnel-Ability to use optical comparator -Ability to perform inspection with height gage and hand held measuring toolsEducation:High SchoolExperience:10+ yearsQualifications:-10 years experience minimum-Experience with inspection equipment, including programming/ operating CMM -Dimensional GD&T knowledge-Working Knowledge of aerospace QMS systems -Able to pass background check -Must be legally authorized to work in the U.S. without sponsorship-Prior aerospace experience Apply online today at www.spherion.com/kalispellSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local Manufacturing Company is seeking an Experienced Quality Control CMM Programmer Inspector to join their team. The Quality Inspector supports incoming, in-process and outgoing part inspection of close tolerance parts to insure product meets customer's specifications.Responsibilities:-Programming and operation of CMM, Experience with Zeiss Calypso is a plus-Application of GD&T -Dimensional inspection of precision parts -Completing inspection reports-Final inspection reportingWorking hours: Various Shifts AvailableSkills:-Ability to convey dimensional findings to machine shop personnel-Ability to use optical comparator -Ability to perform inspection with height gage and hand held measuring toolsEducation:High SchoolExperience:10+ yearsQualifications:-10 years experience minimum-Experience with inspection equipment, including programming/ operating CMM -Dimensional GD&T knowledge-Working Knowledge of aerospace QMS systems -Able to pass background check -Must be legally authorized to work in the U.S. without sponsorship-Prior aerospace experience Apply online today at www.spherion.com/kalispellSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local Manufacturing Company seeking a candidate that is self-inspired to learn and demonstrates a high degree of customer service while positively contributing to our team. Welders/Fabricators will utilize the necessary skills and procedures to construct items used in the production of specialized communication units produced by the Company.Responsibilities:Fabricate and weld metal and/or aluminum by applying the appropriate welding techniques. Must maintain a good proficiency rate, avoiding any rework. Complete extra training to achieve a higher level of skill and accuracy. -Requires the ability to weld both metal and aluminum using MIG, TIG, spool gun, and push-pull. -Strong points would be in fabrication concepts, practices, and procedures within the welding field. -Relies on experience and judgment to accomplish goals. -Works under general supervision; typically reports to a supervisor or manager. -May be cross-trained to work on a variety of processes including, but not limited to: flooring installation, electrical systems, plumbing, door and window installation, stabilizing systems, HVAC, cabinet and countertop making, welding and technology integration.Working hours: Various Shifts AvailableSkills:-Understands the significance of the Company's Core Values and displays a demonstrated willingness to apply them to your work.-2-5+ years of experience of interpreting blueprints, specifications, diagrams or schematics and determining appropriate welding process. -2-5+ years of experience and knowledge of MIG, TIG, spool gun, or push-pull welding applications. -Knowledge of machines and tools, including their designs, uses, repair, and maintenance.-Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. -Basic knowledge of the Metric and Imperial Measurement Systems, and how to calculate with them.Education:High SchoolExperience:1-4 yearsQualifications:-High School Graduate, Diploma or GED received. Further education or an apprenticeship desired. -2-5+ years of previous welding and metal fabrication experience. -Good math skills including understanding numerical data and taking accurate measurements. -Must have valuable clear vision, being able to see details at close range.-Required knowledge and experience with: Interpreting blueprints, specifications, diagrams or schematics, determining appropriate welding process, MIG, TIG, spool gun, push-pull welding applications. Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local Manufacturing Company seeking a candidate that is self-inspired to learn and demonstrates a high degree of customer service while positively contributing to our team. Welders/Fabricators will utilize the necessary skills and procedures to construct items used in the production of specialized communication units produced by the Company.Responsibilities:Fabricate and weld metal and/or aluminum by applying the appropriate welding techniques. Must maintain a good proficiency rate, avoiding any rework. Complete extra training to achieve a higher level of skill and accuracy. -Requires the ability to weld both metal and aluminum using MIG, TIG, spool gun, and push-pull. -Strong points would be in fabrication concepts, practices, and procedures within the welding field. -Relies on experience and judgment to accomplish goals. -Works under general supervision; typically reports to a supervisor or manager. -May be cross-trained to work on a variety of processes including, but not limited to: flooring installation, electrical systems, plumbing, door and window installation, stabilizing systems, HVAC, cabinet and countertop making, welding and technology integration.Working hours: Various Shifts AvailableSkills:-Understands the significance of the Company's Core Values and displays a demonstrated willingness to apply them to your work.-2-5+ years of experience of interpreting blueprints, specifications, diagrams or schematics and determining appropriate welding process. -2-5+ years of experience and knowledge of MIG, TIG, spool gun, or push-pull welding applications. -Knowledge of machines and tools, including their designs, uses, repair, and maintenance.-Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. -Basic knowledge of the Metric and Imperial Measurement Systems, and how to calculate with them.Education:High SchoolExperience:1-4 yearsQualifications:-High School Graduate, Diploma or GED received. Further education or an apprenticeship desired. -2-5+ years of previous welding and metal fabrication experience. -Good math skills including understanding numerical data and taking accurate measurements. -Must have valuable clear vision, being able to see details at close range.-Required knowledge and experience with: Interpreting blueprints, specifications, diagrams or schematics, determining appropriate welding process, MIG, TIG, spool gun, push-pull welding applications. Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.