Thank you for subscribing to your personalized job alerts.

    3 jobs found in warsaw

    Filter1
    Clear all
      • Warsaw, Indiana
      • Temp to Perm
      • $16.25 per hour
      • Various Shifts Available
      Spherion Staffing is hiring Production Operators for a facility in Warsaw, IN.Pay is $16.25/HR1st Shift: 6:30am - 3pm2nd Shift: 10:30pm - 7amSummary:Under the supervision of the Production Supervisor, ensures proper running and cleaning of production equipment in the manufacture of powder coatings.Responsibilities:ALL PRODUCTION EMPLOYEES1. Packaging and palletizing of finished product into boxes, drums, gaylords, and supersacks from 15 lb to 2000 lbs.2. General housekeeping.3. Cleaning grinders, extruders, testing equipment and charging equipment4. Fork Lift operation5. Floor Scrubber operation6. Sampling of raw materials and/or finished good.7. Recording of batch variables and logging data.8. Perform all work safely and injury-free. Must actively participate in improving department and plant safety performance.9. Perform duties according to ISO 14001 procedures and environmentalWEIGH UP OPERATORS:1. Wash totes2. Charge product3. Weigh up critical raws4. Loading and blending of dry materials.5. Sample room (pre-mix)1. Extrude/grind/sieve sample and obtain QC analysis for testing.6. Stage raw materials for batches per batch tickets7. Record data8. Transport totes to blender/blend/sampleEXTRUDER OPERATORS:1. Must possess basic mechanical aptitude.2. Ability to determine screw profile for product as determined on batch ticketor run history by interacting with extruder operator on previous shift.3. Ability to determine cleanliness of machine.4. Operation of grinder and extruder production lines5. Wash and clean totes.6. Dust collector filter replacement on the grinders7. Transport totes of QC approved material to upper level mezzanine.8. Extrude product ? adjust feed rate to allow maximum capacity per productspecification.9. Transport tote to Post-Add station if necessary.10. Transport extruded product to ACM staging area.ACM OPERATORS:1. Grind totes in sequence to minimize contamination at leadperson?s request.2. Must determine cleanliness of machine prior to running product by interacting with previous shift ACM operator.3. Transport tote of approved flake, run a contamination, sieve check and pullsample for QC4. Make adjustments as necessary, re-clean machine if contaminated5. Perform particle size analysis ? adjust if necessary (every 18 boxes)6. Pull samples as required for QC (every 27 boxes)AUTO PACK OPERATOR:1. Monitor operation of Auto Packaging System2. Monitor case erector3. Ensure case erector is equipped with:Boxesmaterial in bag inserterTies for bag closerEnsure case sealer has tape4. Transport full skids, stretch wrap and move to finished goods staging area.Working hours: Various Shifts AvailableSkills:Strong tow motor driving skillsGood computer skills with Microsoft Office: Word, Excel, PowerPoint, etc.Some experience with SAP preferredJob requires good interpersonal and communication skills with the ability to interface with client personnel in a confidential manner.Ability to lift 55 lbs. several times/dailyEducation:High SchoolExperience:0-1 yearsQualifications:Minimum high school diploma or equivalent.Basic math skillsSafety Qualifications: Attend and participate in Warsaw Plant Programs/Committees/Training asrequired, such as Department Safety, Plant Safety, Behavioural Safety,Housekeeping Audit Teams, ISO, Life Saving Rules or any other safetyprograms.Participate in the Warsaw Safety Journey. Adhere to the Golden Principle which is Simply to intervene to stop work if conditions or behaviour are unsafe. If interested, Apply Today! Once you apply,
      Spherion Staffing is hiring Production Operators for a facility in Warsaw, IN.Pay is $16.25/HR1st Shift: 6:30am - 3pm2nd Shift: 10:30pm - 7amSummary:Under the supervision of the Production Supervisor, ensures proper running and cleaning of production equipment in the manufacture of powder coatings.Responsibilities:ALL PRODUCTION EMPLOYEES1. Packaging and palletizing of finished product into boxes, drums, gaylords, and supersacks from 15 lb to 2000 lbs.2. General housekeeping.3. Cleaning grinders, extruders, testing equipment and charging equipment4. Fork Lift operation5. Floor Scrubber operation6. Sampling of raw materials and/or finished good.7. Recording of batch variables and logging data.8. Perform all work safely and injury-free. Must actively participate in improving department and plant safety performance.9. Perform duties according to ISO 14001 procedures and environmentalWEIGH UP OPERATORS:1. Wash totes2. Charge product3. Weigh up critical raws4. Loading and blending of dry materials.5. Sample room (pre-mix)1. Extrude/grind/sieve sample and obtain QC analysis for testing.6. Stage raw materials for batches per batch tickets7. Record data8. Transport totes to blender/blend/sampleEXTRUDER OPERATORS:1. Must possess basic mechanical aptitude.2. Ability to determine screw profile for product as determined on batch ticketor run history by interacting with extruder operator on previous shift.3. Ability to determine cleanliness of machine.4. Operation of grinder and extruder production lines5. Wash and clean totes.6. Dust collector filter replacement on the grinders7. Transport totes of QC approved material to upper level mezzanine.8. Extrude product ? adjust feed rate to allow maximum capacity per productspecification.9. Transport tote to Post-Add station if necessary.10. Transport extruded product to ACM staging area.ACM OPERATORS:1. Grind totes in sequence to minimize contamination at leadperson?s request.2. Must determine cleanliness of machine prior to running product by interacting with previous shift ACM operator.3. Transport tote of approved flake, run a contamination, sieve check and pullsample for QC4. Make adjustments as necessary, re-clean machine if contaminated5. Perform particle size analysis ? adjust if necessary (every 18 boxes)6. Pull samples as required for QC (every 27 boxes)AUTO PACK OPERATOR:1. Monitor operation of Auto Packaging System2. Monitor case erector3. Ensure case erector is equipped with:Boxesmaterial in bag inserterTies for bag closerEnsure case sealer has tape4. Transport full skids, stretch wrap and move to finished goods staging area.Working hours: Various Shifts AvailableSkills:Strong tow motor driving skillsGood computer skills with Microsoft Office: Word, Excel, PowerPoint, etc.Some experience with SAP preferredJob requires good interpersonal and communication skills with the ability to interface with client personnel in a confidential manner.Ability to lift 55 lbs. several times/dailyEducation:High SchoolExperience:0-1 yearsQualifications:Minimum high school diploma or equivalent.Basic math skillsSafety Qualifications: Attend and participate in Warsaw Plant Programs/Committees/Training asrequired, such as Department Safety, Plant Safety, Behavioural Safety,Housekeeping Audit Teams, ISO, Life Saving Rules or any other safetyprograms.Participate in the Warsaw Safety Journey. Adhere to the Golden Principle which is Simply to intervene to stop work if conditions or behaviour are unsafe. If interested, Apply Today! Once you apply,
      • Warsaw, Indiana
      • Temp to Perm
      • $16.25 per hour
      • Various Shifts Available
      Spherion Staffing is hiring Production Operators for a facility in Warsaw, IN.Pay is $16.25/HR1st Shift: 6:30am - 3pm2nd Shift: 10:30pm - 7amSummary:Under the supervision of the Production Supervisor, ensures proper running and cleaning of production equipment in the manufacture of powder coatings.Responsibilities:ALL PRODUCTION EMPLOYEES1. Packaging and palletizing of finished product into boxes, drums, gaylords, and supersacks from 15 lb to 2000 lbs.2. General housekeeping.3. Cleaning grinders, extruders, testing equipment and charging equipment4. Fork Lift operation5. Floor Scrubber operation6. Sampling of raw materials and/or finished good.7. Recording of batch variables and logging data.8. Perform all work safely and injury-free. Must actively participate in improving department and plant safety performance.9. Perform duties according to ISO 14001 procedures and environmentalWEIGH UP OPERATORS:1. Wash totes2. Charge product3. Weigh up critical raws4. Loading and blending of dry materials.5. Sample room (pre-mix)1. Extrude/grind/sieve sample and obtain QC analysis for testing.6. Stage raw materials for batches per batch tickets7. Record data8. Transport totes to blender/blend/sampleEXTRUDER OPERATORS:1. Must possess basic mechanical aptitude.2. Ability to determine screw profile for product as determined on batch ticketor run history by interacting with extruder operator on previous shift.3. Ability to determine cleanliness of machine.4. Operation of grinder and extruder production lines5. Wash and clean totes.6. Dust collector filter replacement on the grinders7. Transport totes of QC approved material to upper level mezzanine.8. Extrude product ? adjust feed rate to allow maximum capacity per productspecification.9. Transport tote to Post-Add station if necessary.10. Transport extruded product to ACM staging area.ACM OPERATORS:1. Grind totes in sequence to minimize contamination at leadperson?s request.2. Must determine cleanliness of machine prior to running product by interacting with previous shift ACM operator.3. Transport tote of approved flake, run a contamination, sieve check and pullsample for QC4. Make adjustments as necessary, re-clean machine if contaminated5. Perform particle size analysis ? adjust if necessary (every 18 boxes)6. Pull samples as required for QC (every 27 boxes)AUTO PACK OPERATOR:1. Monitor operation of Auto Packaging System2. Monitor case erector3. Ensure case erector is equipped with:Boxesmaterial in bag inserterTies for bag closerEnsure case sealer has tape4. Transport full skids, stretch wrap and move to finished goods staging area.Working hours: Various Shifts AvailableSkills:Strong tow motor driving skillsGood computer skills with Microsoft Office: Word, Excel, PowerPoint, etc.Some experience with SAP preferredJob requires good interpersonal and communication skills with the ability to interface with client personnel in a confidential manner.Ability to lift 55 lbs. several times/dailyEducation:High SchoolExperience:0-1 yearsQualifications:Minimum high school diploma or equivalent.Basic math skillsSafety Qualifications: Attend and participate in Warsaw Plant Programs/Committees/Training asrequired, such as Department Safety, Plant Safety, Behavioural Safety,Housekeeping Audit Teams, ISO, Life Saving Rules or any other safetyprograms.Participate in the Warsaw Safety Journey. Adhere to the Golden Principle which is Simply to intervene to stop work if conditions or behaviour are unsafe. If interested, Apply Today! Once y
      Spherion Staffing is hiring Production Operators for a facility in Warsaw, IN.Pay is $16.25/HR1st Shift: 6:30am - 3pm2nd Shift: 10:30pm - 7amSummary:Under the supervision of the Production Supervisor, ensures proper running and cleaning of production equipment in the manufacture of powder coatings.Responsibilities:ALL PRODUCTION EMPLOYEES1. Packaging and palletizing of finished product into boxes, drums, gaylords, and supersacks from 15 lb to 2000 lbs.2. General housekeeping.3. Cleaning grinders, extruders, testing equipment and charging equipment4. Fork Lift operation5. Floor Scrubber operation6. Sampling of raw materials and/or finished good.7. Recording of batch variables and logging data.8. Perform all work safely and injury-free. Must actively participate in improving department and plant safety performance.9. Perform duties according to ISO 14001 procedures and environmentalWEIGH UP OPERATORS:1. Wash totes2. Charge product3. Weigh up critical raws4. Loading and blending of dry materials.5. Sample room (pre-mix)1. Extrude/grind/sieve sample and obtain QC analysis for testing.6. Stage raw materials for batches per batch tickets7. Record data8. Transport totes to blender/blend/sampleEXTRUDER OPERATORS:1. Must possess basic mechanical aptitude.2. Ability to determine screw profile for product as determined on batch ticketor run history by interacting with extruder operator on previous shift.3. Ability to determine cleanliness of machine.4. Operation of grinder and extruder production lines5. Wash and clean totes.6. Dust collector filter replacement on the grinders7. Transport totes of QC approved material to upper level mezzanine.8. Extrude product ? adjust feed rate to allow maximum capacity per productspecification.9. Transport tote to Post-Add station if necessary.10. Transport extruded product to ACM staging area.ACM OPERATORS:1. Grind totes in sequence to minimize contamination at leadperson?s request.2. Must determine cleanliness of machine prior to running product by interacting with previous shift ACM operator.3. Transport tote of approved flake, run a contamination, sieve check and pullsample for QC4. Make adjustments as necessary, re-clean machine if contaminated5. Perform particle size analysis ? adjust if necessary (every 18 boxes)6. Pull samples as required for QC (every 27 boxes)AUTO PACK OPERATOR:1. Monitor operation of Auto Packaging System2. Monitor case erector3. Ensure case erector is equipped with:Boxesmaterial in bag inserterTies for bag closerEnsure case sealer has tape4. Transport full skids, stretch wrap and move to finished goods staging area.Working hours: Various Shifts AvailableSkills:Strong tow motor driving skillsGood computer skills with Microsoft Office: Word, Excel, PowerPoint, etc.Some experience with SAP preferredJob requires good interpersonal and communication skills with the ability to interface with client personnel in a confidential manner.Ability to lift 55 lbs. several times/dailyEducation:High SchoolExperience:0-1 yearsQualifications:Minimum high school diploma or equivalent.Basic math skillsSafety Qualifications: Attend and participate in Warsaw Plant Programs/Committees/Training asrequired, such as Department Safety, Plant Safety, Behavioural Safety,Housekeeping Audit Teams, ISO, Life Saving Rules or any other safetyprograms.Participate in the Warsaw Safety Journey. Adhere to the Golden Principle which is Simply to intervene to stop work if conditions or behaviour are unsafe. If interested, Apply Today! Once y
      • Warsaw, Indiana
      • Temp to Perm
      • $12.00 per hour
      • 12:00 PM - 9:00 PM
      Spherion Staffing is hiring Collection Call Center Agents for our client in Warsaw!Pay is $12.00/HRShift:Monday - Friday: 12 pm - 9 pm*Temp to perm! Able to receive base pay plus commission when hired on!*Responsibilities:This position requires individuals to make collection calls in a call center environment.Customer base is mainly in the medical or utility industry.Looking for individuals who pride themselves on excellent customer service approaches.Working hours: 12:00 PM - 9:00 PMSkills:Computer SkillsTeamwork mentalityCustomer Service skillsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma RequiredPre-employment drug screen and background check If interested apply today! Call or text us at 260-496-9900 to speak with a recruiter!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is hiring Collection Call Center Agents for our client in Warsaw!Pay is $12.00/HRShift:Monday - Friday: 12 pm - 9 pm*Temp to perm! Able to receive base pay plus commission when hired on!*Responsibilities:This position requires individuals to make collection calls in a call center environment.Customer base is mainly in the medical or utility industry.Looking for individuals who pride themselves on excellent customer service approaches.Working hours: 12:00 PM - 9:00 PMSkills:Computer SkillsTeamwork mentalityCustomer Service skillsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma RequiredPre-employment drug screen and background check If interested apply today! Call or text us at 260-496-9900 to speak with a recruiter!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.