Thank you for subscribing to your personalized job alerts.

    9 jobs found for Data in Minnesota

    Filter4
    Clear all
      • St Peter, Minnesota
      • Permanent
      • $18.50 per hour
      • 5:00 PM - 3:30 AM
      DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 5:00 p.m. - 3:30 a.m., OT every other FridayPay: $18.50/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 5:00 PM - 3:30 AMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 5:00 p.m. - 3:30 a.m., OT every other FridayPay: $18.50/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 5:00 PM - 3:30 AMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Claremont, Minnesota
      • Permanent
      • $20.00 - $26.00 per hour
      • 6:00 AM - 5:00 PM
      Come and work for a GROWING Company that has recently expanded! 4-10 hour days!Maintenance technicians are responsible for the safe and efficient execution of preventative maintenance programs, conduct planned and unplanned equipment repairs, and are responsible for the operational reliability of equipment, rolling stock, and the overall facility. Position reports to the Maintenance Manager. Position is non-exempt.Responsibilities:1. Perform scheduled preventative maintenance and planned or unplanned repairs using skills and knowledge of the craft trades2. Appropriately inspect and operate all equipment and machinery as necessary including forklifts, telehandlers, and skid loaders safely3. Interpretation of blueprints, manufacturers manuals or similar documents4. Determine methods and materials needed to complete assignments5. Comply with relevant safety regulations and policies in the execution of all job tasks6. Maintain a clean and safe working environment7. Participate in safety, health, and environmental programs8. Be available for overtime or call-in as required9. Provide emergency/unscheduled repairs of production equipment 10. Inspect, troubleshoot, and report on electrical, piping, and mechanical issues11. Perform welding, cutting, grinding, fabrication on plant equipment12. Work with external contractors to install and repair equipment13. Communicate verbally and in writing to coordinate with team members and other departments to safely execute maintenance repair work14. Other duties as assignedWorking hours: 6:00 AM - 5:00 PMSkills:1.-Ability to use a variety of tools from hammers, wrenches, to blowtorches and more2.-Welding knowledge and experience on carbon / stainless steel preferred3.-Troubleshooting skills to be able to follow a problem to the source and solve the issue4.-Ability to read material safety data sheets (MSDS) and ready chemical labels5.-Experience with computerized maintenance management software preferred 6.-Knowledge in Microsoft Office Suite and ability to learn new software applicationsEducation:High SchoolExperience:1-4 yearsQualifications:1. High school diploma or equivalent required. College degree or technical degree/certification; millwright, electrician, welder, pipe-fitter or Instrumentation preferred2. 2 years??? experience in maintenance or repair of mechanical equipment; pumps, valves, compressors, electrical or instrumentation required3. Possess a valid driver???s license and be able to drive DON'T WAIT APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Come and work for a GROWING Company that has recently expanded! 4-10 hour days!Maintenance technicians are responsible for the safe and efficient execution of preventative maintenance programs, conduct planned and unplanned equipment repairs, and are responsible for the operational reliability of equipment, rolling stock, and the overall facility. Position reports to the Maintenance Manager. Position is non-exempt.Responsibilities:1. Perform scheduled preventative maintenance and planned or unplanned repairs using skills and knowledge of the craft trades2. Appropriately inspect and operate all equipment and machinery as necessary including forklifts, telehandlers, and skid loaders safely3. Interpretation of blueprints, manufacturers manuals or similar documents4. Determine methods and materials needed to complete assignments5. Comply with relevant safety regulations and policies in the execution of all job tasks6. Maintain a clean and safe working environment7. Participate in safety, health, and environmental programs8. Be available for overtime or call-in as required9. Provide emergency/unscheduled repairs of production equipment 10. Inspect, troubleshoot, and report on electrical, piping, and mechanical issues11. Perform welding, cutting, grinding, fabrication on plant equipment12. Work with external contractors to install and repair equipment13. Communicate verbally and in writing to coordinate with team members and other departments to safely execute maintenance repair work14. Other duties as assignedWorking hours: 6:00 AM - 5:00 PMSkills:1.-Ability to use a variety of tools from hammers, wrenches, to blowtorches and more2.-Welding knowledge and experience on carbon / stainless steel preferred3.-Troubleshooting skills to be able to follow a problem to the source and solve the issue4.-Ability to read material safety data sheets (MSDS) and ready chemical labels5.-Experience with computerized maintenance management software preferred 6.-Knowledge in Microsoft Office Suite and ability to learn new software applicationsEducation:High SchoolExperience:1-4 yearsQualifications:1. High school diploma or equivalent required. College degree or technical degree/certification; millwright, electrician, welder, pipe-fitter or Instrumentation preferred2. 2 years??? experience in maintenance or repair of mechanical equipment; pumps, valves, compressors, electrical or instrumentation required3. Possess a valid driver???s license and be able to drive DON'T WAIT APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hayward, Minnesota
      • Permanent
      • $17.00 - $25.00 per hour
      • 7:00 AM - 4:15 PM
      This position designs and develops new models, mechanisms, devices, machinery, or adaptations for products under the direction of a Product Engineer. Responsible for correct proportions, consideration of stress, speed, motion, weight, operational details, customer specifications, and the incorporation of usable parts that may be in production. Designs are to include appropriate dimensions, tolerances, fasteners, and joining requirements. Works with engineers to complete the design documentation package including BOM's and routings.Responsibilities:Performs complex engineering calculations using algebraic, trigonometric, and geometric formulas. Uses standard product engineering data to develop product configuration. Utilizes computer aided design techniques to perform applicable design work. May supervise experimental manufacture and testing of finished product. Acts as the design lead for major projects and may supervise the activities of other designers and drafters.OTHER DUTIESPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.Working hours: 7:00 AM - 4:15 PMSkills:-High mechanical aptitude-Organizational skills-Must be able to adapt to a physically demanding environment and maintain positive demeanor.Education:High SchoolExperience:1-4 yearsQualifications:High School Diploma or equivalentMust be 18 years of age or olderRequires a two-year technical degree/certification.Requires a high degree of technical knowledge and skill.Requires four years of experience in mechanical drafting and design.Must be able to adapt to a physically demanding environment and maintain positive demeanor. Requires passing a pre-employment screening and drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position designs and develops new models, mechanisms, devices, machinery, or adaptations for products under the direction of a Product Engineer. Responsible for correct proportions, consideration of stress, speed, motion, weight, operational details, customer specifications, and the incorporation of usable parts that may be in production. Designs are to include appropriate dimensions, tolerances, fasteners, and joining requirements. Works with engineers to complete the design documentation package including BOM's and routings.Responsibilities:Performs complex engineering calculations using algebraic, trigonometric, and geometric formulas. Uses standard product engineering data to develop product configuration. Utilizes computer aided design techniques to perform applicable design work. May supervise experimental manufacture and testing of finished product. Acts as the design lead for major projects and may supervise the activities of other designers and drafters.OTHER DUTIESPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.Working hours: 7:00 AM - 4:15 PMSkills:-High mechanical aptitude-Organizational skills-Must be able to adapt to a physically demanding environment and maintain positive demeanor.Education:High SchoolExperience:1-4 yearsQualifications:High School Diploma or equivalentMust be 18 years of age or olderRequires a two-year technical degree/certification.Requires a high degree of technical knowledge and skill.Requires four years of experience in mechanical drafting and design.Must be able to adapt to a physically demanding environment and maintain positive demeanor. Requires passing a pre-employment screening and drug screen. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $19.50 - $22.50 per hour
      • 3:00 PM - 11:00 PM
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection of coated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts. WHY WAIT | GREAT JOB OPPORTUNITIES NOW | APPLYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection of coated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts. WHY WAIT | GREAT JOB OPPORTUNITIES NOW | APPLYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $19.50 - $22.50 per hour
      • 11:00 PM - 7:00 AM
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required or requested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 11:00 PM - 7:00 AMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability to read shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts APPLY TODAY | FULLTIME OPPORTUNITIES AVAILABLE NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required or requested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 11:00 PM - 7:00 AMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability to read shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts APPLY TODAY | FULLTIME OPPORTUNITIES AVAILABLE NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $19.00 - $23.00 per hour
      • 3:00 PM - 11:00 PM
      $1500 Work Bonus | Direct HireFor assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts. DON'T WAIT, JOBS ARE GOING FAST!! APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      $1500 Work Bonus | Direct HireFor assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts. DON'T WAIT, JOBS ARE GOING FAST!! APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $18.50 - $21.50 per hour
      • 7:00 AM - 3:00 PM
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection of coated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability to read shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receives specific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should be rejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts. APPLY TODAY | GREAT OPPORTUNITIES | THESE WON'T LAST LONG!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection of coated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation of equipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability to read shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player is required. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receives specific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should be rejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safety meetings and other improvement efforts. APPLY TODAY | GREAT OPPORTUNITIES | THESE WON'T LAST LONG!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $21.68 per hour
      • 2:00 PM - 10:00 PM
      Do you love Direct Hire Opportunities that offer great pay and benefits? Don't miss out on this one and APPLY TODAY for this rare opportunity with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Monday - Friday, 2nd shift from 2:00 p.m. - 10:00 p.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 2:00 PM - 10:00 PMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful and be seen as credible in the workplaceEducation
      Do you love Direct Hire Opportunities that offer great pay and benefits? Don't miss out on this one and APPLY TODAY for this rare opportunity with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Monday - Friday, 2nd shift from 2:00 p.m. - 10:00 p.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 2:00 PM - 10:00 PMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful and be seen as credible in the workplaceEducation
      • Mankato, Minnesota
      • Permanent
      • $21.68 per hour
      • 10:00 PM - 6:30 AM
      GREAT PAY! INCREDIBLE BENEFITS!! APPLY TODAY !!! DIRECT HIRE PRODUCTION POSITIONS now available with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Monday - Friday, 3rd shift from 10:00 p.m. - 6:00 a.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 10:00 PM - 6:30 AMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful and be seen as credible in the workplaceEducation:High SchoolExperience:0-1 year
      GREAT PAY! INCREDIBLE BENEFITS!! APPLY TODAY !!! DIRECT HIRE PRODUCTION POSITIONS now available with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Monday - Friday, 3rd shift from 10:00 p.m. - 6:00 a.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 10:00 PM - 6:30 AMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful and be seen as credible in the workplaceEducation:High SchoolExperience:0-1 year

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.