You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    7 jobs found for Independent

    Filter2
    Clear all
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hagerstown, Maryland
      • Temporary
      • $16.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an Assembly position with a company that develops rugged electronic enclosures, modular cabinets and integrated manufacturing systems that are designed to provide precision fabrication, CNC machining and turning and chemical processing.Responsibilities:Responsible for the assembly of a wide variety of products of various sizes under the direction of the Finishing supervisor.Installs hardware in accordance with the customer specifications as shown on the drawings or any other applicable work instructions.Ensures that all issued hardware is accounted for and reports any discrepancies to the supervisor.Be cost effective in utilization of tools, supplies, and equipment.Responsible for the complete and independent setup of the Haeger presses and various other specialty tools needed to install hardware.Cut, trim and glue gasket material as directed by blue prints.Ensures proper assembly of products according to customer supplied specifications and that the product is within specified tolerances.Inspects own work to verify compliance with the customer specifications.Maintains equipment and work areas in a clean, safe, and orderly condition.Records labor hours as required in the Fabritrak system.Performs other duties as assigned by the Finishing Supervisor.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Must be able to read a blueprint and must have manufacturing experience.Basic math skills.Ability to use all types of measuring instruments necessary to inspect work.Education:High SchoolExperience:1-4 yearsQualifications:High School diploma or GED equivalent or demonstrated experience.Must be able to lift 50 pounds. Please call the Hagerstown Spherion Office today to discuss this opportunity 301-739-6900!!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Madison, Wisconsin
      • Temporary
      • $25.00 - $30.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion is recruiting for a temporary Accountant to join the team of our State of Wisconsin client! This position will work under the general supervision of the Department Budget Director, perform accounting functions for all programs, and provide financial management services for the Department of Financial Institutions and the Office of Credit Unions. If you are detail-oriented, thrive on digging into complex issues, and enjoy proposing ideas to implement/improve processes, this position is for you!Responsibilities:- Perform accounting functions for 23 organizational units and ensure that revenue and expenditures are appropriately accounted for- High-level oversight of the Department receipting and cash management functions including making recommendations for agency policies and procedures to ensure appropriate internal controls are in place for the safeguard of assets- Serve as the primary fiscal contact for the development and implementation of new accounting systems and applications- Serve as the primary contact for all e-commerce initiatives within the DepartmentWorking hours: 8:00 AM - 5:00 PMSkills:- Strong organizational skills and the ability to prioritize- Strong critical thinking, analytical, and data gathering skills- Skill in using Microsoft Office applications, with advanced Excel proficiency- Advanced problem-solving skills- Effective written and oral communication skillsEducation:BachelorsExperience:1-4 yearsQualifications:- Bachelors degree or higher in Accounting required- At least two years of equivalent work-related experience (in an accounting or auditing field)- Certified Public Accountant (CPA) professional designation is preferred but not required- Ability to research, analyze and determine responses to complex questions and problems- Ability to reconcile accounts on a periodic basis to other accounting systems- Ability to develop financial policies and procedures- Strong knowledge of the principles of internal control- Ability to advise management on methods to improve accounting or other operational procedures- Ability to communicate fiscal issues effectively with division/program staff- Knowledge of Generally Accepted Accounting Principles (GAAP) applicable to state and local governments- Knowledge of organizational, priority setting, and time management methods and techniques- Knowledge of accounting or ERP systems, preferably PeopleSoft- Strong ability to make sound, independent decisions and to execute such decisions efficiently and effectively in addition to working in a team environment- Ability to use, learn and adapt to changing computer software and applications- Knowledge of program management, long range planning and policy development Apply via the apply button in the top right hand corner today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is recruiting for a temporary Accountant to join the team of our State of Wisconsin client! This position will work under the general supervision of the Department Budget Director, perform accounting functions for all programs, and provide financial management services for the Department of Financial Institutions and the Office of Credit Unions. If you are detail-oriented, thrive on digging into complex issues, and enjoy proposing ideas to implement/improve processes, this position is for you!Responsibilities:- Perform accounting functions for 23 organizational units and ensure that revenue and expenditures are appropriately accounted for- High-level oversight of the Department receipting and cash management functions including making recommendations for agency policies and procedures to ensure appropriate internal controls are in place for the safeguard of assets- Serve as the primary fiscal contact for the development and implementation of new accounting systems and applications- Serve as the primary contact for all e-commerce initiatives within the DepartmentWorking hours: 8:00 AM - 5:00 PMSkills:- Strong organizational skills and the ability to prioritize- Strong critical thinking, analytical, and data gathering skills- Skill in using Microsoft Office applications, with advanced Excel proficiency- Advanced problem-solving skills- Effective written and oral communication skillsEducation:BachelorsExperience:1-4 yearsQualifications:- Bachelors degree or higher in Accounting required- At least two years of equivalent work-related experience (in an accounting or auditing field)- Certified Public Accountant (CPA) professional designation is preferred but not required- Ability to research, analyze and determine responses to complex questions and problems- Ability to reconcile accounts on a periodic basis to other accounting systems- Ability to develop financial policies and procedures- Strong knowledge of the principles of internal control- Ability to advise management on methods to improve accounting or other operational procedures- Ability to communicate fiscal issues effectively with division/program staff- Knowledge of Generally Accepted Accounting Principles (GAAP) applicable to state and local governments- Knowledge of organizational, priority setting, and time management methods and techniques- Knowledge of accounting or ERP systems, preferably PeopleSoft- Strong ability to make sound, independent decisions and to execute such decisions efficiently and effectively in addition to working in a team environment- Ability to use, learn and adapt to changing computer software and applications- Knowledge of program management, long range planning and policy development Apply via the apply button in the top right hand corner today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    Explore over 7 jobs

    It looks like you want to switch your language. This will reset your filters on your current job search.