Thank you for subscribing to your personalized job alerts.

    33 jobs found in hayfield, minnesota

    Filter3
    • Industry1
      Working in
      Show 33 jobs
      Clear filter
    • Location1
      Location & range
        Show 33 jobs
        Clear filter
      • Job types
        Job types
        Show 33 jobs
        Clear filter
      • Salary
        Salary
        Show 33 jobs
        Clear filter
      Clear all
        • Owatonna, Minnesota
        • Temporary
        • $25.00 - $30.00 per hour
        • 8:00 AM - 4:30 PM
        We are seeking candidates with previous experience working as an electronics technician in a product development environment.This position is expected to last for 6-months. Responsibilities:Troubleshoot and repair of electronic circuit boardsBuild prototype electronic circuits per the engineering team instructionsPerform complicated solder, de-solder, miscellaneous rework of circuit boards or productsGeneral support the engineering team for new product introductionsPerform design validation testing on new productsWrite reports documenting testing resultsWorking hours: 8:00 AM - 4:30 PMSkills:Good working knowledge of electronic circuitsWorking knowledge of electronics test equipment such as oscilloscopes, multi-meters, etc.Working knowledge of MS Office productsMechanical aptitude desiredEducation:TradeExperience:1-4 yearsQualifications:Two year degree in electronics technology or equivalent Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        We are seeking candidates with previous experience working as an electronics technician in a product development environment.This position is expected to last for 6-months. Responsibilities:Troubleshoot and repair of electronic circuit boardsBuild prototype electronic circuits per the engineering team instructionsPerform complicated solder, de-solder, miscellaneous rework of circuit boards or productsGeneral support the engineering team for new product introductionsPerform design validation testing on new productsWrite reports documenting testing resultsWorking hours: 8:00 AM - 4:30 PMSkills:Good working knowledge of electronic circuitsWorking knowledge of electronics test equipment such as oscilloscopes, multi-meters, etc.Working knowledge of MS Office productsMechanical aptitude desiredEducation:TradeExperience:1-4 yearsQualifications:Two year degree in electronics technology or equivalent Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temp to Perm
        • $14.75 per hour
        • 3:00 PM - 11:00 PM
        For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:MastersExperience:0-1 yearsQualifications:Qualifications / Prior ExperienceLearning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts.Work Environment / Other RequirementsEquipment Operated - Process and quality testing equipment, weigh scales, computer, R&T clocks, various small hand toolsand material movement equipment. Moderate care is required to prevent damage to equipmentWorking Conditions and Hazards - General working conditions are good. Exposed to hazards of machine operation andminimal exposure to fumes from coating operation. Safety equipment required consists of gloves, safety shoes, safetyglasses with side shields, and other PPE safety devices as required. Body jewelry and rings must be post style only. Wearingof rings is not permitted at the Paint Services facility.Physical Effort Required - Continuous standing, visual atte
        For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:MastersExperience:0-1 yearsQualifications:Qualifications / Prior ExperienceLearning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts.Work Environment / Other RequirementsEquipment Operated - Process and quality testing equipment, weigh scales, computer, R&T clocks, various small hand toolsand material movement equipment. Moderate care is required to prevent damage to equipmentWorking Conditions and Hazards - General working conditions are good. Exposed to hazards of machine operation andminimal exposure to fumes from coating operation. Safety equipment required consists of gloves, safety shoes, safetyglasses with side shields, and other PPE safety devices as required. Body jewelry and rings must be post style only. Wearingof rings is not permitted at the Paint Services facility.Physical Effort Required - Continuous standing, visual atte
        • Owatonna, Minnesota
        • Temporary
        • $14.00 per hour
        • 7:00 AM - 3:30 PM (Various Shifts Available)
        **INCREASED STARTING PAY**This position is accountable for the set-up, assembly and packaging of product to cost-effectively produce high-quality products on a timely basis that meets customer requirements.Responsibilities:Assemble and/or package high quality products that meet customer and design specifications while minimizing scrap/rework costs.Continually monitor methods, processes and procedures to ensure departmental goals are being met related to efficiencies, equipment utilization and time usage in order to maintain or improve cost competitiveness.Provide quality in all goods and services delivered to internal and external customers through an approach of thorough planning, responsible implementation, and continuous improvement.Follow and continually monitor established safety procedures to assure a clean, safe work environment is promoted and maintained.Maintain a positive work atmosphere by behaving and communicating in a manner that interfaces well with customers, clients, co-workers and management members.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Ability to operate hand tools, such as arbor presses, tape machines, and bandersAbility to work overtime including weekends, and alter hours as business needs dictateAbility to work effectively as part of a teamAbility to read and interpret blueprints.Ability to read and understand written EnglishAbility to read and interpret process routings, bills of materials, and proceduresBasic Math skills, including percentages and the ability to count accuratelyOn-line computing skills to record labor transactionsEducation:No Degree RequiredExperience:0-1 yearsQualifications:Prior assembly experience preferred Apply online or call us today at 507-451-3400Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        **INCREASED STARTING PAY**This position is accountable for the set-up, assembly and packaging of product to cost-effectively produce high-quality products on a timely basis that meets customer requirements.Responsibilities:Assemble and/or package high quality products that meet customer and design specifications while minimizing scrap/rework costs.Continually monitor methods, processes and procedures to ensure departmental goals are being met related to efficiencies, equipment utilization and time usage in order to maintain or improve cost competitiveness.Provide quality in all goods and services delivered to internal and external customers through an approach of thorough planning, responsible implementation, and continuous improvement.Follow and continually monitor established safety procedures to assure a clean, safe work environment is promoted and maintained.Maintain a positive work atmosphere by behaving and communicating in a manner that interfaces well with customers, clients, co-workers and management members.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Ability to operate hand tools, such as arbor presses, tape machines, and bandersAbility to work overtime including weekends, and alter hours as business needs dictateAbility to work effectively as part of a teamAbility to read and interpret blueprints.Ability to read and understand written EnglishAbility to read and interpret process routings, bills of materials, and proceduresBasic Math skills, including percentages and the ability to count accuratelyOn-line computing skills to record labor transactionsEducation:No Degree RequiredExperience:0-1 yearsQualifications:Prior assembly experience preferred Apply online or call us today at 507-451-3400Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $17.00 - $20.00 per hour
        • 5:30 AM - 3:30 PM
        SUMMARY / OBJECTIVESet up and safely operate Press Brakes to process/ produce highest quality products by performing the following duties:Responsibilities:ESSENTIAL FUNCTIONS AND PRIMARY RESPONSIBILITIES1. Responsible for operation, proving programs, operating controls, setting all machine functions, deburring and inspection of parts to assure required conformance.2. Set up and document tooling and safe practices for Press Brake operations.3. Verify accuracy of machine settings to confirm accurate tolerances and machine functions.4. Maintain accurate parts on routine repetitive jobs.5. Perform in-process checks to maintain all required tolerances and quality.6. Communicate all production-related items to next shift operators or shift supervisors.7. Detect equipment malfunctions or out-of-tolerances machining and adjust machine within capabilities. Report all machine malfunctions to Management.8. ?Flex? into other Departments and Work Centers to perform needed production/support tasks.SECONDARY RESPONSIBILITIESPerform miscellaneous projects and complete various tasks as requested by management.Working hours: 5:30 AM - 3:30 PMSkills:JOB SPECIFICATIONSEducation, Experience and Credentials--.Knowledge, Skills and Abilities--Ability to run multi axis Press Brake. Set-up experience is beneficial.--Must be able to read and understand written instructions, shop drawings (blueprints), charts, and diagrams.--Ability to read measuring equipment including tape measure, caliper, protractor, etc.Education:TradeExperience:1-4 yearsQualifications:PHYSICAL REQUIREMENTS NECESSARY TO PERFORM THIS JOBIncumbent must be able to:? Lift up to 70 pounds on occasion.TOOLS AND EQUIPMENT USED Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        SUMMARY / OBJECTIVESet up and safely operate Press Brakes to process/ produce highest quality products by performing the following duties:Responsibilities:ESSENTIAL FUNCTIONS AND PRIMARY RESPONSIBILITIES1. Responsible for operation, proving programs, operating controls, setting all machine functions, deburring and inspection of parts to assure required conformance.2. Set up and document tooling and safe practices for Press Brake operations.3. Verify accuracy of machine settings to confirm accurate tolerances and machine functions.4. Maintain accurate parts on routine repetitive jobs.5. Perform in-process checks to maintain all required tolerances and quality.6. Communicate all production-related items to next shift operators or shift supervisors.7. Detect equipment malfunctions or out-of-tolerances machining and adjust machine within capabilities. Report all machine malfunctions to Management.8. ?Flex? into other Departments and Work Centers to perform needed production/support tasks.SECONDARY RESPONSIBILITIESPerform miscellaneous projects and complete various tasks as requested by management.Working hours: 5:30 AM - 3:30 PMSkills:JOB SPECIFICATIONSEducation, Experience and Credentials--.Knowledge, Skills and Abilities--Ability to run multi axis Press Brake. Set-up experience is beneficial.--Must be able to read and understand written instructions, shop drawings (blueprints), charts, and diagrams.--Ability to read measuring equipment including tape measure, caliper, protractor, etc.Education:TradeExperience:1-4 yearsQualifications:PHYSICAL REQUIREMENTS NECESSARY TO PERFORM THIS JOBIncumbent must be able to:? Lift up to 70 pounds on occasion.TOOLS AND EQUIPMENT USED Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $15.95 per hour
        • 11:30 AM - 8:30 PM
        Stock Associate - Picker PackerResponsibilities:Unpacks and places parts received from suppliers and customers on shelves in the correct alphanumeric sequence or proper location within the stockroom in a neat and orderly fashion. Removes all packing material and waste product disposing in proper receptacle.Secondary Function:May assist in the pulling of product using an electronic scanner, placing product in proper container for shipment. Additionally, may assist in loading product into trucks for shipmentWorking hours: 11:30 AM - 8:30 PMSkills:-Ability to lift / carry by hand freight weighing up to 50 pounds several times a week. -Able to push/pull up to 300 lbs using mechanical aids, such as hand trucks, barrel dollies, hydraulic lifts, etc. -Ability to bend, twist, squat, climb, push and pull and move at a quick speed of pace. -Ability to work with computer scanning equipment. -Ability to follow instructions and complete required training. -Must be able to work both independently and in a team environment. -Must have basic written and verbal communication skills (documentation, communication with peers, supervisors and customers.)Education:High SchoolExperience:0-1 yearsQualifications:Requires completion of a high school diploma, general education degree (GED) or equivalent combination of experience and education. Must be functionally literate (able to read numbers, read/write at a 4th grade level). Must be able to pass a background check. Must be able to work in a drug free atmosphere. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Stock Associate - Picker PackerResponsibilities:Unpacks and places parts received from suppliers and customers on shelves in the correct alphanumeric sequence or proper location within the stockroom in a neat and orderly fashion. Removes all packing material and waste product disposing in proper receptacle.Secondary Function:May assist in the pulling of product using an electronic scanner, placing product in proper container for shipment. Additionally, may assist in loading product into trucks for shipmentWorking hours: 11:30 AM - 8:30 PMSkills:-Ability to lift / carry by hand freight weighing up to 50 pounds several times a week. -Able to push/pull up to 300 lbs using mechanical aids, such as hand trucks, barrel dollies, hydraulic lifts, etc. -Ability to bend, twist, squat, climb, push and pull and move at a quick speed of pace. -Ability to work with computer scanning equipment. -Ability to follow instructions and complete required training. -Must be able to work both independently and in a team environment. -Must have basic written and verbal communication skills (documentation, communication with peers, supervisors and customers.)Education:High SchoolExperience:0-1 yearsQualifications:Requires completion of a high school diploma, general education degree (GED) or equivalent combination of experience and education. Must be functionally literate (able to read numbers, read/write at a 4th grade level). Must be able to pass a background check. Must be able to work in a drug free atmosphere. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $15.50 per hour
        • 6:00 AM - 6:30 PM
        The Lacquer Spray Machine (L.S.M.) Operators are responsible for the application of the lacquer spray coating to the inside of the can in compliance with quality control specifications. They have primary control of the processing of cans from the point of infeeding of cans into the conveying above the spray machines, until they reach the Internal Bake Ovens (I.B.O.?s).Responsibilities:1. Clearing can jams from Lacquer Spray Machines and from upper conveyors.2. Check and monitor the following: Clean canworksOverall quality of cans Lacquer pressure of LSMsesTemperature of lacquerCopper sulfate checks on flanges3. Monitor, measure and enter into the computer the following data: Metal exposure of cans Weight of lacquer on inside of cansFilm weight distribution 4. Maintain cleanliness of machines including the spray nozzles, turrent wheels, lacquer overspray boxes, machine exterior and general work area. Follow all safety procedures and PPE requirements.5. Perform routine maintenance including the setting of guns, nozzles, can guides and spray delay.6. Perform preventative maintenance which includes the replacement of drive and conveyor belts to the oven, tips, rails, guns, lacquer and vacuum filters.7. Follow proper material handling procedures, which includes proper disposal of waste lacquer and labeling of waste barrels.8. Perform Equipment Set-up Evaluations (ESE) on LSMs after adjustment or changes are made.9. Monitor and assist other production processes on the Back End to ensure a constant flow of cans into and through the LSM process.10. Other duties as required.Working hours: 6:00 AM - 6:30 PMSkills:1. Basic Mechanical Skills2. Basic computer skills to perform data entry.Education:High SchoolExperience:0-1 yearsQualifications:Knowledge of SPC programs and be able to interpret SPC data for trends, principles graphs charts4. Know how to complete and document an ESE for the LSMs.5. Working knowledge of the operation, setup, preventative maintenance & repair, and troubleshooting in the LSM process.6AM - 6PM. 4 on 4 off - could go to full-time. Immediate Openings! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The Lacquer Spray Machine (L.S.M.) Operators are responsible for the application of the lacquer spray coating to the inside of the can in compliance with quality control specifications. They have primary control of the processing of cans from the point of infeeding of cans into the conveying above the spray machines, until they reach the Internal Bake Ovens (I.B.O.?s).Responsibilities:1. Clearing can jams from Lacquer Spray Machines and from upper conveyors.2. Check and monitor the following: Clean canworksOverall quality of cans Lacquer pressure of LSMsesTemperature of lacquerCopper sulfate checks on flanges3. Monitor, measure and enter into the computer the following data: Metal exposure of cans Weight of lacquer on inside of cansFilm weight distribution 4. Maintain cleanliness of machines including the spray nozzles, turrent wheels, lacquer overspray boxes, machine exterior and general work area. Follow all safety procedures and PPE requirements.5. Perform routine maintenance including the setting of guns, nozzles, can guides and spray delay.6. Perform preventative maintenance which includes the replacement of drive and conveyor belts to the oven, tips, rails, guns, lacquer and vacuum filters.7. Follow proper material handling procedures, which includes proper disposal of waste lacquer and labeling of waste barrels.8. Perform Equipment Set-up Evaluations (ESE) on LSMs after adjustment or changes are made.9. Monitor and assist other production processes on the Back End to ensure a constant flow of cans into and through the LSM process.10. Other duties as required.Working hours: 6:00 AM - 6:30 PMSkills:1. Basic Mechanical Skills2. Basic computer skills to perform data entry.Education:High SchoolExperience:0-1 yearsQualifications:Knowledge of SPC programs and be able to interpret SPC data for trends, principles graphs charts4. Know how to complete and document an ESE for the LSMs.5. Working knowledge of the operation, setup, preventative maintenance & repair, and troubleshooting in the LSM process.6AM - 6PM. 4 on 4 off - could go to full-time. Immediate Openings! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $14 per year
        • 2:00 PM - 10:30 PM
        To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.Responsibilities:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:00 PM - 10:30 PMSkills:1.-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.-End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third.Education:High SchoolExperience:0-1 yearsQualifications:Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequentlyStand, twist, bend and rotate continuously, Immediate Openings! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.Responsibilities:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:00 PM - 10:30 PMSkills:1.-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.-End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third.Education:High SchoolExperience:0-1 yearsQualifications:Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequentlyStand, twist, bend and rotate continuously, Immediate Openings! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $14.00 - $14.65 per hour
        • 3:30 PM - 2:00 AM
        Assemble and test high-quality products.Responsibilities:-Assure high-quality products through product testing including complex electronic systems and troubleshooting issues that may arise.-Perform setup operations for both equipment and cells including any necessary sub-assemblies to assure efficient and high quality assembly of electronic products.-Safely operate tools and equipment including: impact tools, arbor presses, tape machines, staple guns, pneumatic presses and banders.Working hours: 3:30 PM - 2:00 AMSkills:-Solder training preferred-Automated equipment experienceEducation:High SchoolExperience:1-4 yearsQualifications:-Prior assembly experience preferred-Experience using hand tools 2nd shift positions available immediately. Please call 507-451-3400 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Assemble and test high-quality products.Responsibilities:-Assure high-quality products through product testing including complex electronic systems and troubleshooting issues that may arise.-Perform setup operations for both equipment and cells including any necessary sub-assemblies to assure efficient and high quality assembly of electronic products.-Safely operate tools and equipment including: impact tools, arbor presses, tape machines, staple guns, pneumatic presses and banders.Working hours: 3:30 PM - 2:00 AMSkills:-Solder training preferred-Automated equipment experienceEducation:High SchoolExperience:1-4 yearsQualifications:-Prior assembly experience preferred-Experience using hand tools 2nd shift positions available immediately. Please call 507-451-3400 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temp to Perm
        • $14.00 - $15.00 per hour
        • 9:30 AM - 6:00 PM
        This position is responsible for the accurate picking, packing, shipping & receiving of inventoried products on a timely basis to meet internal and external customer needs in support of goals and objectives.Responsibilities:Performs a variety of functions involved with shipping, receiving and storage of parts, materials and products.Functions may include preparing parts/materials for shipment, pack material, verifying materials and quantities, maintaining inventory, verifying stock counts, moving parts and materials to proper areas.Operates a variety of motorized and hand powered material handling equipment as well as scales, postage meters, conveyor systems.Performs work from printed order copies as well as various other written and verbal instructions.Maintains a variety of records pertaining to shipping, receiving, unloading trucks.Working hours: 9:30 AM - 6:00 PMSkills:Ability to use computer terminals.Job duties require use of arithmetic, reading, writing, and measuring equipment.Education:High SchoolExperience:0-1 yearsQualifications:Applicants must have good interpersonal and conflict resolution skills.Applicants must be able and willing to support different areas and functions within the warehouse as business requires. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        This position is responsible for the accurate picking, packing, shipping & receiving of inventoried products on a timely basis to meet internal and external customer needs in support of goals and objectives.Responsibilities:Performs a variety of functions involved with shipping, receiving and storage of parts, materials and products.Functions may include preparing parts/materials for shipment, pack material, verifying materials and quantities, maintaining inventory, verifying stock counts, moving parts and materials to proper areas.Operates a variety of motorized and hand powered material handling equipment as well as scales, postage meters, conveyor systems.Performs work from printed order copies as well as various other written and verbal instructions.Maintains a variety of records pertaining to shipping, receiving, unloading trucks.Working hours: 9:30 AM - 6:00 PMSkills:Ability to use computer terminals.Job duties require use of arithmetic, reading, writing, and measuring equipment.Education:High SchoolExperience:0-1 yearsQualifications:Applicants must have good interpersonal and conflict resolution skills.Applicants must be able and willing to support different areas and functions within the warehouse as business requires. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $15.00 per hour
        • 5:00 AM - 3:30 PM
        This position is responsible for counting and verifying on-hand inventory quantities, which include raw steel and unfinished and finished product, and for consistent cycle counting for all part numbers to assure that accurate inventories are readily available to meet customer needs.Responsibilities:Audit warehouse operations for accuracy and correctness and recommend corrective action in the following areas to assure proper part identification and stock rotation:1.- Part number2.- Part description rotating stock3.- Part location4.- Unmarked partsWorking hours: 5:00 AM - 3:30 PMSkills:Job duties require use of arithmetic, reading, writing, and measuring equipment.Applicants must have good interpersonal and conflict resolution skills.Applicants must be able and willing to support different areas and functions within the warehouse as business requires.Education:High SchoolExperience:0-1 yearsQualifications:Participate as a contributing member of cross-functional teams to address and solve inventory accuracy issues.Assist in the resolution inventory inaccuracies to assure that inventory levels are accurately reflected to support production and customer needs. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        This position is responsible for counting and verifying on-hand inventory quantities, which include raw steel and unfinished and finished product, and for consistent cycle counting for all part numbers to assure that accurate inventories are readily available to meet customer needs.Responsibilities:Audit warehouse operations for accuracy and correctness and recommend corrective action in the following areas to assure proper part identification and stock rotation:1.- Part number2.- Part description rotating stock3.- Part location4.- Unmarked partsWorking hours: 5:00 AM - 3:30 PMSkills:Job duties require use of arithmetic, reading, writing, and measuring equipment.Applicants must have good interpersonal and conflict resolution skills.Applicants must be able and willing to support different areas and functions within the warehouse as business requires.Education:High SchoolExperience:0-1 yearsQualifications:Participate as a contributing member of cross-functional teams to address and solve inventory accuracy issues.Assist in the resolution inventory inaccuracies to assure that inventory levels are accurately reflected to support production and customer needs. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $14.50 per hour
        • 2:00 PM - 10:30 PM
        To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:00 PM - 10:30 PMSkills:1.-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.-End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8 hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:High SchoolExperience:0-1 yearsQualifications:PHYSICAL DEMANDS: Ability to Lift and carry up to 8.5lbs from floor to 60 inches-frequently. Stand, twist, bend and rotate ? continuously, Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:00 PM - 10:30 PMSkills:1.-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.-End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8 hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:High SchoolExperience:0-1 yearsQualifications:PHYSICAL DEMANDS: Ability to Lift and carry up to 8.5lbs from floor to 60 inches-frequently. Stand, twist, bend and rotate ? continuously, Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Austin, Minnesota
        • Permanent
        • $21.00 - $22.00 per hour
        • 6:00 AM - 4:00 PM
        SHEAR/BRAKE OPERATORResponsibilities:Read and understand shop drawings to fabricate structural projects to designOperate Brake equipment ? form material to precise dimensionsLayout piece parts for shearing/formingRead and understand a tape measureMeasure accuratelyCustom bending/formingAttention to Details is a MUSTLift up to 50 pounds and operate an overhead hoistOperate various hand toolsWork safely and efficiently while completing tasksWorking hours: 6:00 AM - 4:00 PMSkills:-Previous Shear/Brake experience-Previous blueprint reading experience required-Ability to work with several supervisors-Ability to work independently-Ability to work in a team environment-Basic knowledge of equipment and its maintenance-Multi-task-Attendance is a priorityEducation:High SchoolExperience:0-1 yearsQualifications:Education: -High school or equivalent (Preferred)Experience: -Shear/Brake: 1 year (Required) DIRECT HIRE! Immediate opening with locally family owned company. Apply Today!Great Benefits:-401(k) matching-Employee discount-Health insurance-Health savings account-Life insurance-Paid time off-Retirement planSchedule:-10 hour shift-12 hour shift-8 hour shift-Day shift-Monday to FridaySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        SHEAR/BRAKE OPERATORResponsibilities:Read and understand shop drawings to fabricate structural projects to designOperate Brake equipment ? form material to precise dimensionsLayout piece parts for shearing/formingRead and understand a tape measureMeasure accuratelyCustom bending/formingAttention to Details is a MUSTLift up to 50 pounds and operate an overhead hoistOperate various hand toolsWork safely and efficiently while completing tasksWorking hours: 6:00 AM - 4:00 PMSkills:-Previous Shear/Brake experience-Previous blueprint reading experience required-Ability to work with several supervisors-Ability to work independently-Ability to work in a team environment-Basic knowledge of equipment and its maintenance-Multi-task-Attendance is a priorityEducation:High SchoolExperience:0-1 yearsQualifications:Education: -High school or equivalent (Preferred)Experience: -Shear/Brake: 1 year (Required) DIRECT HIRE! Immediate opening with locally family owned company. Apply Today!Great Benefits:-401(k) matching-Employee discount-Health insurance-Health savings account-Life insurance-Paid time off-Retirement planSchedule:-10 hour shift-12 hour shift-8 hour shift-Day shift-Monday to FridaySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temp to Perm
        • $15.00 per hour
        • 6:00 AM - 2:30 PM
        Ensure that quality packaging materials are supplied to palletizing operations and transport finished quality pallets to the appropriate area of the warehouse.Responsibilities:*Keep palletizer magazines full of pallets, top frames, and slip sheets and ensure the quality of all materials.*Keep pallets aligned properly and remove jams as needed.*Make sure pallet inventory is properly sorted, with defective pallets stored in separate areas.*Check conditions of forklift and perform basic P.M.'s at the start of each shift.*Ensure strappers are full of branding materials and pallets are flowing smoothly through lower conveying.*Perform band tension check once per shift and document results on the check sheet.*Inspect and transport finished pallets to the warehouse, referring any H.F.I.s for proper dispositions.*Maintain good housekeeping in lower conveying area.*Assist in other areas as needed to maintain a smooth flow of cans through the plant.Working hours: 6:00 AM - 2:30 PMSkills:*Ability to safely operate all forklifts in the plant.*Know how to fill tanks and do basic inspections of fork truck at shift startup.*Knowledge of can sizes, lacquer finishes, and pack sizes.*Able to read and understand pallet tickets and date codes*Understand dunnage materials specifications, quality packaging requirements and H.F.I procedures.*Basic understanding of can manufacturing process and quality can specifications.*Working knowledge of palletizing system and lower conveying.*Knowledge of safety regulations that apply to work functions.Education:High SchoolExperience:1-4 yearsQualifications:Someone with ample forklift experience. They should be willing to stay busy because they will be. The job also involves stacking of plastic top frames, which is done manually, of the forklift. So it's not all seat time. The ideal candidate would also have good organizational skills as they will be responsible for keeping the area in order. The schedule is Mon-Fri, 6a-2:30p. There could be some occasional overtime. Most often the overtime would be working until 4:30p. Weekend work would be rare, if at all. Starting rate is $15.00/hr. This would be a long-term position.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Ensure that quality packaging materials are supplied to palletizing operations and transport finished quality pallets to the appropriate area of the warehouse.Responsibilities:*Keep palletizer magazines full of pallets, top frames, and slip sheets and ensure the quality of all materials.*Keep pallets aligned properly and remove jams as needed.*Make sure pallet inventory is properly sorted, with defective pallets stored in separate areas.*Check conditions of forklift and perform basic P.M.'s at the start of each shift.*Ensure strappers are full of branding materials and pallets are flowing smoothly through lower conveying.*Perform band tension check once per shift and document results on the check sheet.*Inspect and transport finished pallets to the warehouse, referring any H.F.I.s for proper dispositions.*Maintain good housekeeping in lower conveying area.*Assist in other areas as needed to maintain a smooth flow of cans through the plant.Working hours: 6:00 AM - 2:30 PMSkills:*Ability to safely operate all forklifts in the plant.*Know how to fill tanks and do basic inspections of fork truck at shift startup.*Knowledge of can sizes, lacquer finishes, and pack sizes.*Able to read and understand pallet tickets and date codes*Understand dunnage materials specifications, quality packaging requirements and H.F.I procedures.*Basic understanding of can manufacturing process and quality can specifications.*Working knowledge of palletizing system and lower conveying.*Knowledge of safety regulations that apply to work functions.Education:High SchoolExperience:1-4 yearsQualifications:Someone with ample forklift experience. They should be willing to stay busy because they will be. The job also involves stacking of plastic top frames, which is done manually, of the forklift. So it's not all seat time. The ideal candidate would also have good organizational skills as they will be responsible for keeping the area in order. The schedule is Mon-Fri, 6a-2:30p. There could be some occasional overtime. Most often the overtime would be working until 4:30p. Weekend work would be rare, if at all. Starting rate is $15.00/hr. This would be a long-term position.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temp to Perm
        • $17.75 per hour
        • 3:00 PM - 10:00 PM
        Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts forfurther operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are beingdispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are notoverloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Knowledge / Skills / AbilitiesWorking hours: 3:00 PM - 10:00 PMSkills:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basicskills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures.Education:No Degree RequiredExperience:0-1 yearsQualifications:Constant noise and heat based on location. Exposure to hazards of machine operation and to wet floor from spray. Someexposure to hot equipment and parts. Uniform safety practices consist of safety shoes, safety glasses with side shields,hearing protection and other devices as required.Requires continuous standing and walking. Occasional moderate to heavy lifting of parts or equipment Immediate Openings! Apply today, and get to work tomorrow!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully