Thank you for subscribing to your personalized job alerts.

    9 jobs found in Claremont, Minnesota

    Filter3
    Clear all
      • Claremont, Minnesota
      • Permanent
      • $20.00 - $26.00 per hour
      • 6:00 AM - 5:00 PM
      Come and work for a GROWING Company that has recently expanded! 4-10 hour days!Maintenance technicians are responsible for the safe and efficient execution of preventative maintenance programs, conduct planned and unplanned equipment repairs, and are responsible for the operational reliability of equipment, rolling stock, and the overall facility. Position reports to the Maintenance Manager. Position is non-exempt.Responsibilities:1. Perform scheduled preventative maintenance and planned or unplanned repairs using skills and knowledge of the craft trades2. Appropriately inspect and operate all equipment and machinery as necessary including forklifts, telehandlers, and skid loaders safely3. Interpretation of blueprints, manufacturers manuals or similar documents4. Determine methods and materials needed to complete assignments5. Comply with relevant safety regulations and policies in the execution of all job tasks6. Maintain a clean and safe working environment7. Participate in safety, health, and environmental programs8. Be available for overtime or call-in as required9. Provide emergency/unscheduled repairs of production equipment 10. Inspect, troubleshoot, and report on electrical, piping, and mechanical issues11. Perform welding, cutting, grinding, fabrication on plant equipment12. Work with external contractors to install and repair equipment13. Communicate verbally and in writing to coordinate with team members and other departments to safely execute maintenance repair work14. Other duties as assignedWorking hours: 6:00 AM - 5:00 PMSkills:1.-Ability to use a variety of tools from hammers, wrenches, to blowtorches and more2.-Welding knowledge and experience on carbon / stainless steel preferred3.-Troubleshooting skills to be able to follow a problem to the source and solve the issue4.-Ability to read material safety data sheets (MSDS) and ready chemical labels5.-Experience with computerized maintenance management software preferred 6.-Knowledge in Microsoft Office Suite and ability to learn new software applicationsEducation:High SchoolExperience:1-4 yearsQualifications:1. High school diploma or equivalent required. College degree or technical degree/certification; millwright, electrician, welder, pipe-fitter or Instrumentation preferred2. 2 years??? experience in maintenance or repair of mechanical equipment; pumps, valves, compressors, electrical or instrumentation required3. Possess a valid driver???s license and be able to drive DON'T WAIT APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Come and work for a GROWING Company that has recently expanded! 4-10 hour days!Maintenance technicians are responsible for the safe and efficient execution of preventative maintenance programs, conduct planned and unplanned equipment repairs, and are responsible for the operational reliability of equipment, rolling stock, and the overall facility. Position reports to the Maintenance Manager. Position is non-exempt.Responsibilities:1. Perform scheduled preventative maintenance and planned or unplanned repairs using skills and knowledge of the craft trades2. Appropriately inspect and operate all equipment and machinery as necessary including forklifts, telehandlers, and skid loaders safely3. Interpretation of blueprints, manufacturers manuals or similar documents4. Determine methods and materials needed to complete assignments5. Comply with relevant safety regulations and policies in the execution of all job tasks6. Maintain a clean and safe working environment7. Participate in safety, health, and environmental programs8. Be available for overtime or call-in as required9. Provide emergency/unscheduled repairs of production equipment 10. Inspect, troubleshoot, and report on electrical, piping, and mechanical issues11. Perform welding, cutting, grinding, fabrication on plant equipment12. Work with external contractors to install and repair equipment13. Communicate verbally and in writing to coordinate with team members and other departments to safely execute maintenance repair work14. Other duties as assignedWorking hours: 6:00 AM - 5:00 PMSkills:1.-Ability to use a variety of tools from hammers, wrenches, to blowtorches and more2.-Welding knowledge and experience on carbon / stainless steel preferred3.-Troubleshooting skills to be able to follow a problem to the source and solve the issue4.-Ability to read material safety data sheets (MSDS) and ready chemical labels5.-Experience with computerized maintenance management software preferred 6.-Knowledge in Microsoft Office Suite and ability to learn new software applicationsEducation:High SchoolExperience:1-4 yearsQualifications:1. High school diploma or equivalent required. College degree or technical degree/certification; millwright, electrician, welder, pipe-fitter or Instrumentation preferred2. 2 years??? experience in maintenance or repair of mechanical equipment; pumps, valves, compressors, electrical or instrumentation required3. Possess a valid driver???s license and be able to drive DON'T WAIT APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Blooming Prairie, Minnesota
      • Permanent
      • $60,000 - $80,000 per year
      • 8:00 AM - 5:00 PM
      The position of Quality Manager will involve some special projects with work direction possibly coming from multiple sources. Products manufactured are widely used in the grain, concrete, aggregate, mining, and agricultural industries. MAJOR AREAS OF ACCOUNTABILITY Quality System:o Maintenance of the ISO9001 Certified Quality System.o Manage and carry on Internal Audits.o Coordinate External Audits with an official registrar company. Product Quality: Vendors Quality and performance. Incoming material inspection. Internal Product Quality: Internal processes quality and controls, and final quality controls. Customers Quality: Manage costumer complaints and costumer relations regarding quality. Create stability and processes to support the QMS.Responsibilities: Oversee all product development procedures to ensure compliance of quality standards. Verify that the purchased raw material or products from suppliers meet the specifications. Monitor the vendors performance. Supervise the inspectors, technicians and other staff and provide guidance and feedback. Inspect final output to guarantee that requirements are achieved, approving the right products, and rejecting defective ones. Keep accurate documentation of all processes and procedures in the plant. Analyze data to detect deviations from the standards. Submit detailed reports as needed. Be the driver of the continuous improvement in the plant.Working hours: 8:00 AM - 5:00 PMSkills:-Proven experience as Quality Manager and ISO experience.-Outstanding communication skills.-Excellent organizational and leadership skills.-Proficient in MS Office and knowledge of data analysis.-In-depth understanding of quality control procedures and relevant legal standards.-Certification as Internal Auditor is an advantage -Ability to be flexible and patient with lack of structureEducation:BachelorsExperience:4-7 yearsQualifications: Bachelors degree in Quality, Operations, Manufacturing Engineering, or other related field or equivalent experience to obtain required knowledge base 5-7 years relevant experience Weld experience ASQ and/or Six Sigma Certification preferred Direct experience with a quality function and/or quality related responsibilities Direct experience in team facilitation and group leadership Previous supervisory or management experience, skills and responsibility is required Must be able to demonstrate good interpersonal skills; ability to work with others efficiently and effectively both one-on-one and as a part of a team/group Effective communication skills, both verbal and written *DIRECT HIRE POSITION!* Benefits Include: Health Insurance, Dental, Vision, PTO, 401K, and more.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The position of Quality Manager will involve some special projects with work direction possibly coming from multiple sources. Products manufactured are widely used in the grain, concrete, aggregate, mining, and agricultural industries. MAJOR AREAS OF ACCOUNTABILITY Quality System:o Maintenance of the ISO9001 Certified Quality System.o Manage and carry on Internal Audits.o Coordinate External Audits with an official registrar company. Product Quality: Vendors Quality and performance. Incoming material inspection. Internal Product Quality: Internal processes quality and controls, and final quality controls. Customers Quality: Manage costumer complaints and costumer relations regarding quality. Create stability and processes to support the QMS.Responsibilities: Oversee all product development procedures to ensure compliance of quality standards. Verify that the purchased raw material or products from suppliers meet the specifications. Monitor the vendors performance. Supervise the inspectors, technicians and other staff and provide guidance and feedback. Inspect final output to guarantee that requirements are achieved, approving the right products, and rejecting defective ones. Keep accurate documentation of all processes and procedures in the plant. Analyze data to detect deviations from the standards. Submit detailed reports as needed. Be the driver of the continuous improvement in the plant.Working hours: 8:00 AM - 5:00 PMSkills:-Proven experience as Quality Manager and ISO experience.-Outstanding communication skills.-Excellent organizational and leadership skills.-Proficient in MS Office and knowledge of data analysis.-In-depth understanding of quality control procedures and relevant legal standards.-Certification as Internal Auditor is an advantage -Ability to be flexible and patient with lack of structureEducation:BachelorsExperience:4-7 yearsQualifications: Bachelors degree in Quality, Operations, Manufacturing Engineering, or other related field or equivalent experience to obtain required knowledge base 5-7 years relevant experience Weld experience ASQ and/or Six Sigma Certification preferred Direct experience with a quality function and/or quality related responsibilities Direct experience in team facilitation and group leadership Previous supervisory or management experience, skills and responsibility is required Must be able to demonstrate good interpersonal skills; ability to work with others efficiently and effectively both one-on-one and as a part of a team/group Effective communication skills, both verbal and written *DIRECT HIRE POSITION!* Benefits Include: Health Insurance, Dental, Vision, PTO, 401K, and more.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Blooming Prairie, Minnesota
      • Permanent
      • $60,000 - $65,000 per year
      • 7:00 AM - 4:00 PM
      The Tooling Engineer is responsible for the research, design, development, build, validation, and implementation of tooling for new and existing products, manufacturing, and production processes. This position reports to the Plant Manager. A typical day for a Tooling Engineer will consist of a daily conference call about new and existing sales quotations. During this time ECO?s will be reviewed and action plans completed. Afterwards, a discussion with the tooling team will be conducted for evaluation of work duties and deployment of your team. The tooling team keeps our lines producing quality parts efficiently and fast. Your skills with CAD and Solid Works will allow you to draw up plans and solicit quotations for new or improved tooling concepts. Every day provides for a new challenge. Longer term projects will include organization, validation, and improvement to the tooling warehouse. A comprehensive tooling strategy should develop by the end of your first year. This position will be an excellent opportunity for someone wanting challenge and growth with a stellar local company.Responsibilities: Support open cast molding process by assisting in the design, fabrication, validation and repair and maintenance of tooling through the coordination of any outside vendors or internal resources. Develop and manage the production tooling standards as needed. Develop and rate tooling suppliers for quality, delivery, competitive price, and location. Develop preventative maintenance programs, advising on spare parts inventory, and coordinating the repair and servicing of tooling. Active member of the Engineering Team (cross functional group that addresses any design, quality or manufacturing concerns/needs before production starts). Ensure necessary documentation is updated for ongoing engineering changes related to tooling. Manage continuous improvement of existing molding programs to increase profitability, reduce scrap, reduce waste, and downtime reduction. Work with internal and external resources to resolve product or production issues. Lead or assist in corrective or preventive action root cause analysis, implementation, and verification. Manage a dynamic 3-5 person team. Able to work independently and handle multiple priorities. Accepts other duties and assumes other responsibilities as assigned or as need becomes apparent.Working hours: 7:00 AM - 4:00 PMSkills:-Ability to conduct in-dept research and present specific reasoning of recommendations.-Ability to develop project plans, coordinate projects, communicate changes and progress and complete projects on time and on budget.-Mechanically inclined.-Experience in open cast urethane process is preferred.-Good working knowledge of tool room equipment processes, tool design, CAD and SolidWorks?, geometric dimensioning and tolerancing.-Solid communication and organizational skills and ability to work with others to get resultsEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors Degree in Engineering or other Technical Degree, and three years? experience, or equivalent experience, and skill set. Extensive computer skills, including Microsoft Office products. Solid technical, analytical, systematic, and detail-oriented thinking skills. *DIRECT HIRE POSITION!* Benefits Include: Health Insurance, Dental, Vision, PTO, 401K, and more.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Tooling Engineer is responsible for the research, design, development, build, validation, and implementation of tooling for new and existing products, manufacturing, and production processes. This position reports to the Plant Manager. A typical day for a Tooling Engineer will consist of a daily conference call about new and existing sales quotations. During this time ECO?s will be reviewed and action plans completed. Afterwards, a discussion with the tooling team will be conducted for evaluation of work duties and deployment of your team. The tooling team keeps our lines producing quality parts efficiently and fast. Your skills with CAD and Solid Works will allow you to draw up plans and solicit quotations for new or improved tooling concepts. Every day provides for a new challenge. Longer term projects will include organization, validation, and improvement to the tooling warehouse. A comprehensive tooling strategy should develop by the end of your first year. This position will be an excellent opportunity for someone wanting challenge and growth with a stellar local company.Responsibilities: Support open cast molding process by assisting in the design, fabrication, validation and repair and maintenance of tooling through the coordination of any outside vendors or internal resources. Develop and manage the production tooling standards as needed. Develop and rate tooling suppliers for quality, delivery, competitive price, and location. Develop preventative maintenance programs, advising on spare parts inventory, and coordinating the repair and servicing of tooling. Active member of the Engineering Team (cross functional group that addresses any design, quality or manufacturing concerns/needs before production starts). Ensure necessary documentation is updated for ongoing engineering changes related to tooling. Manage continuous improvement of existing molding programs to increase profitability, reduce scrap, reduce waste, and downtime reduction. Work with internal and external resources to resolve product or production issues. Lead or assist in corrective or preventive action root cause analysis, implementation, and verification. Manage a dynamic 3-5 person team. Able to work independently and handle multiple priorities. Accepts other duties and assumes other responsibilities as assigned or as need becomes apparent.Working hours: 7:00 AM - 4:00 PMSkills:-Ability to conduct in-dept research and present specific reasoning of recommendations.-Ability to develop project plans, coordinate projects, communicate changes and progress and complete projects on time and on budget.-Mechanically inclined.-Experience in open cast urethane process is preferred.-Good working knowledge of tool room equipment processes, tool design, CAD and SolidWorks?, geometric dimensioning and tolerancing.-Solid communication and organizational skills and ability to work with others to get resultsEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors Degree in Engineering or other Technical Degree, and three years? experience, or equivalent experience, and skill set. Extensive computer skills, including Microsoft Office products. Solid technical, analytical, systematic, and detail-oriented thinking skills. *DIRECT HIRE POSITION!* Benefits Include: Health Insurance, Dental, Vision, PTO, 401K, and more.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.00 - $19.00 per hour
      • Various Shifts Available
      Assist with the set-up and operate all die casting machines and trim presses, in the efficient and safe production of qualityzinc parts.Responsibilities:Operate (manually or automatically) die casting machine and trim press to produce the required number of quality parts foreach order. May assist in having tooling and gaging pre-set, pre-staged and ready to deliver to machine prior to set up.Assist with set up of die casting machines and automatic extractors so they function properly in the production of quality zincparts. - Clean machine, inspect and mount new die in the proper manner, make necessary hookups and settings, proceed tomake first shot together with necessary adjustments for the desired quality of a zinc part. - Obtain approval from Lead forproduction run. Routinely check the quality of parts run. Set up trim tools and operate trim press for die cast parts not selftrimmed by machine and make routine quality checks on parts trimmed. 6. Maintain accurate production records. Understandand may operate other die casting machines, trim presses and support equipment in the department as production requiresor during machine breakdowns. May fill in for Pot Tender as work load requires. Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Inspect parts coming off the die cast machine and trim press to determine if quality standards are met. Errors in judgementmay not be detected until they have caused noticeable costs in time and money.Education:High SchoolExperience:0-1 yearsQualifications:Mechanical aptitude is necessary in setting up and operating die casting machines, trimmers, pots and support equipment.Skill in working with common hand tools. High School graduate or GED. On the job training to learn the setups, adjustments,and operating requirements of the various die casting machines and trimmers. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Assist with the set-up and operate all die casting machines and trim presses, in the efficient and safe production of qualityzinc parts.Responsibilities:Operate (manually or automatically) die casting machine and trim press to produce the required number of quality parts foreach order. May assist in having tooling and gaging pre-set, pre-staged and ready to deliver to machine prior to set up.Assist with set up of die casting machines and automatic extractors so they function properly in the production of quality zincparts. - Clean machine, inspect and mount new die in the proper manner, make necessary hookups and settings, proceed tomake first shot together with necessary adjustments for the desired quality of a zinc part. - Obtain approval from Lead forproduction run. Routinely check the quality of parts run. Set up trim tools and operate trim press for die cast parts not selftrimmed by machine and make routine quality checks on parts trimmed. 6. Maintain accurate production records. Understandand may operate other die casting machines, trim presses and support equipment in the department as production requiresor during machine breakdowns. May fill in for Pot Tender as work load requires. Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Inspect parts coming off the die cast machine and trim press to determine if quality standards are met. Errors in judgementmay not be detected until they have caused noticeable costs in time and money.Education:High SchoolExperience:0-1 yearsQualifications:Mechanical aptitude is necessary in setting up and operating die casting machines, trimmers, pots and support equipment.Skill in working with common hand tools. High School graduate or GED. On the job training to learn the setups, adjustments,and operating requirements of the various die casting machines and trimmers. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.00 - $19.00 per hour
      • Various Shifts Available
      Set up and operate department machines to perform hobbing, induction heat treating, Plus associated equipment, inaccordance with established production and quality standards.Responsibilities:Operate machine in performing required operations in accordance with established production and quality standards.Perform required machine setups consistent with machine and product specifications; changes tools, cutters, fixtures, etc.Use gauges to check certain parts to assure they conform to quality and engineering blueprints and specifications.Make machine adjustments and tool changes as necessary to correct or maintain product quality.Clean machine and work area and assure proper lubricants and coolants are adequately applied to machine.Make minor machine repairs and notify Lead of machine malfunctions.Order parts and benchstock as required.Maintain accurate production records and fill out work order for completed orders.Review and interpret dispatch list for work to be done and due dates.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Problem Solving and Decision Making - Determine appropriate setup for product being manufactured. Assure sufficientcoolant and lubricant is applied to machine. Determine tooling wear and the need for replacement. Determine when machineadjustments or repairs are required. Determine if parts meet quality standards. Errors in judgment may be detected insubsequent steps or not until they have caused noticeable costs in time or money.Relations with Others - Interacts with other machine operators, Lead in department, Inspection personnel, MaterialHandlers and Tool and Die Maintenance personnel. The incumbent may participate in small group activities such as taskteams, safety meetings and other improvement efforts.Learning Period - At least two months is required to learn the basics of the job. To handle all aspects of the job withminimum supervision takes two years or more.Education:High SchoolExperience:0-1 yearsQualifications:Skills/Abilities - Read shop orders and all associated documents, above average mechanical aptitude, using measuringdevices and hand tools, and work independently. Must be fluent in the English language, both written and spoken.Training and Experience - Machine setup and operation. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set up and operate department machines to perform hobbing, induction heat treating, Plus associated equipment, inaccordance with established production and quality standards.Responsibilities:Operate machine in performing required operations in accordance with established production and quality standards.Perform required machine setups consistent with machine and product specifications; changes tools, cutters, fixtures, etc.Use gauges to check certain parts to assure they conform to quality and engineering blueprints and specifications.Make machine adjustments and tool changes as necessary to correct or maintain product quality.Clean machine and work area and assure proper lubricants and coolants are adequately applied to machine.Make minor machine repairs and notify Lead of machine malfunctions.Order parts and benchstock as required.Maintain accurate production records and fill out work order for completed orders.Review and interpret dispatch list for work to be done and due dates.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Problem Solving and Decision Making - Determine appropriate setup for product being manufactured. Assure sufficientcoolant and lubricant is applied to machine. Determine tooling wear and the need for replacement. Determine when machineadjustments or repairs are required. Determine if parts meet quality standards. Errors in judgment may be detected insubsequent steps or not until they have caused noticeable costs in time or money.Relations with Others - Interacts with other machine operators, Lead in department, Inspection personnel, MaterialHandlers and Tool and Die Maintenance personnel. The incumbent may participate in small group activities such as taskteams, safety meetings and other improvement efforts.Learning Period - At least two months is required to learn the basics of the job. To handle all aspects of the job withminimum supervision takes two years or more.Education:High SchoolExperience:0-1 yearsQualifications:Skills/Abilities - Read shop orders and all associated documents, above average mechanical aptitude, using measuringdevices and hand tools, and work independently. Must be fluent in the English language, both written and spoken.Training and Experience - Machine setup and operation. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $20.00 - $22.00 per hour
      • Various Shifts Available
      Set up and operate department machines to perform hobbing, induction heat treating, Plus associated equipment, inaccordance with established production and quality standards.Responsibilities:Operate machine in performing required operations in accordance with established production and quality standards.Perform required machine setups consistent with machine and product specifications; changes tools, cutters, fixtures, etc.Use gauges to check certain parts to assure they conform to quality and engineering blueprints and specifications.Make machine adjustments and tool changes as necessary to correct or maintain product quality.Clean machine and work area and assure proper lubricants and coolants are adequately applied to machine.Make minor machine repairs and notify Lead of machine malfunctions.Order parts and benchstock as required.Maintain accurate production records and fill out work order for completed orders.Review and interpret dispatch list for work to be done and due dates.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Problem Solving and Decision Making - Determine appropriate setup for product being manufactured. Assure sufficientcoolant and lubricant is applied to machine. Determine tooling wear and the need for replacement. Determine when machineadjustments or repairs are required. Determine if parts meet quality standards. Errors in judgment may be detected insubsequent steps or not until they have caused noticeable costs in time or money.Relations with Others - Interacts with other machine operators, Lead in department, Inspection personnel, MaterialHandlers and Tool and Die Maintenance personnel. The incumbent may participate in small group activities such as taskteams, safety meetings and other improvement efforts.Learning Period - At least two months is required to learn the basics of the job. To handle all aspects of the job withminimum supervision takes two years or more.Education:High SchoolExperience:1-4 yearsQualifications:Skills/Abilities - Read shop orders and all associated documents, above average mechanical aptitude, using measuringdevices and hand tools, and work independently. Must be fluent in the English language, both written and spoken.Training and Experience - Machine setup and operation. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set up and operate department machines to perform hobbing, induction heat treating, Plus associated equipment, inaccordance with established production and quality standards.Responsibilities:Operate machine in performing required operations in accordance with established production and quality standards.Perform required machine setups consistent with machine and product specifications; changes tools, cutters, fixtures, etc.Use gauges to check certain parts to assure they conform to quality and engineering blueprints and specifications.Make machine adjustments and tool changes as necessary to correct or maintain product quality.Clean machine and work area and assure proper lubricants and coolants are adequately applied to machine.Make minor machine repairs and notify Lead of machine malfunctions.Order parts and benchstock as required.Maintain accurate production records and fill out work order for completed orders.Review and interpret dispatch list for work to be done and due dates.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Problem Solving and Decision Making - Determine appropriate setup for product being manufactured. Assure sufficientcoolant and lubricant is applied to machine. Determine tooling wear and the need for replacement. Determine when machineadjustments or repairs are required. Determine if parts meet quality standards. Errors in judgment may be detected insubsequent steps or not until they have caused noticeable costs in time or money.Relations with Others - Interacts with other machine operators, Lead in department, Inspection personnel, MaterialHandlers and Tool and Die Maintenance personnel. The incumbent may participate in small group activities such as taskteams, safety meetings and other improvement efforts.Learning Period - At least two months is required to learn the basics of the job. To handle all aspects of the job withminimum supervision takes two years or more.Education:High SchoolExperience:1-4 yearsQualifications:Skills/Abilities - Read shop orders and all associated documents, above average mechanical aptitude, using measuringdevices and hand tools, and work independently. Must be fluent in the English language, both written and spoken.Training and Experience - Machine setup and operation. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $15.00 - $17.50 per hour
      • Various Shifts Available
      Assemble finished window hardware products for shipment to customer, according to output plan, while maintaining qualitystandards.Responsibilities:Assemble metal parts: a. May walk to producing area to get pan of parts for assembly and complete necessary paperwork.b. Read order to verify parts are correct. c. Check quality of components before assembling by referring to written standardsfor quality control and/or blueprints. d. Record daily individual or work center production quantity on Production Board and inred book. e. Inspects final assembly by referring to written criteria. f. Assemble boxes for final packing of product.May assist in machine set-up as necessary.Assist in training department personnel with operations and procedures.Meets briefly with following shift to communicate problems, possible solutions and issues requiring attention.- May make minor adjustments to machines to keep them in working order.- May act as back-up Material Handler, as necessary.- May occasionally check and approve work of temporary personnel.- May stock parts at work center and stack finished goods on pallet.- May perform minor preventive maintenance on machinery.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Learn to read blueprints, operate assembly equipment and use computer to verify informationEducation:No Degree RequiredExperience:0-1 yearsQualifications:Supervision Received - Under regular supervision, only exceptional or unusual tasks are fully checked, normal tasks arespot-checked on a regular basis, generally daily. Assignments are specific, incumbent uses standardized methods tocomplete.Problem solving and Decision Making - Assesses parts to determine if they meet quality standards, if they do not, mayshut down machine and notify Lead.Relations with Others - Interacts with personnel from Assembly area, Plating, Punch Press and Maintenance. Mayparticipate in small group activities such as Quality Circles, task teams, safety meetings and other improvement efforts.Learning Period - The basics of working in the Assembly area can be learned in two to three weeks. To handle all aspectsof the job with minimal supervision requires six to nine months of on-the-job training. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Assemble finished window hardware products for shipment to customer, according to output plan, while maintaining qualitystandards.Responsibilities:Assemble metal parts: a. May walk to producing area to get pan of parts for assembly and complete necessary paperwork.b. Read order to verify parts are correct. c. Check quality of components before assembling by referring to written standardsfor quality control and/or blueprints. d. Record daily individual or work center production quantity on Production Board and inred book. e. Inspects final assembly by referring to written criteria. f. Assemble boxes for final packing of product.May assist in machine set-up as necessary.Assist in training department personnel with operations and procedures.Meets briefly with following shift to communicate problems, possible solutions and issues requiring attention.- May make minor adjustments to machines to keep them in working order.- May act as back-up Material Handler, as necessary.- May occasionally check and approve work of temporary personnel.- May stock parts at work center and stack finished goods on pallet.- May perform minor preventive maintenance on machinery.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Learn to read blueprints, operate assembly equipment and use computer to verify informationEducation:No Degree RequiredExperience:0-1 yearsQualifications:Supervision Received - Under regular supervision, only exceptional or unusual tasks are fully checked, normal tasks arespot-checked on a regular basis, generally daily. Assignments are specific, incumbent uses standardized methods tocomplete.Problem solving and Decision Making - Assesses parts to determine if they meet quality standards, if they do not, mayshut down machine and notify Lead.Relations with Others - Interacts with personnel from Assembly area, Plating, Punch Press and Maintenance. Mayparticipate in small group activities such as Quality Circles, task teams, safety meetings and other improvement efforts.Learning Period - The basics of working in the Assembly area can be learned in two to three weeks. To handle all aspectsof the job with minimal supervision requires six to nine months of on-the-job training. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $16.00 - $18.00 per hour
      • Various Shifts Available
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: Various Shifts AvailableSkills:Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:0-1 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: Various Shifts AvailableSkills:Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:0-1 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Rochester, Minnesota
      • Permanent
      • $23.00 - $28.00 per hour
      • 8:00 AM - 5:00 PM
      CMM Operators/Quality Inspectors are responsible for providing leadership and direction in support of the company's Quality Management System. This will require an individual who is a self-starter, motivated and multi-task oriented. Candidate should be experienced with inspections in a production/manufacturing environment. CMM Inspectors utilize a CMM for dimensional inspections, (detail parts, components, and assemblies) and provide reports to support inspections performed. Duties will include (but not limited to) receiving an inspection, in-process inspection, final inspection, disposition and control of nonconforming product, first article inspection and record keeping.Responsibilities:Be accountable for working safely by following all safety rules and safe work practices.Always consider safety before action.Operate CMM in automatic program mode, using (PC DMIS) programs.Manipulate CMM results using CADInspection and calibration of inspection fixtures and hand tools.Preparation of layout reports using the computer.Maintain department equipment. Communicate effectively with machinists and operators to maintain acceptable quality. Perform First Article Inspections by hand also with a variety of inspection tools.Must be a demonstrated team player with a positive attitude, superior work ethic, and able to solve issues respectfully with peers and management. Actively participate in continuous improvement initiatives such as 5S and Kaizen events along with zero Defect Quality Initiatives.Working hours: 8:00 AM - 5:00 PMSkills:Must be able to Read/Comprehend English instructions.Computer literate (spreadsheets and word processor)Strong written and oral communication skills and legible handwriting.Ability to work independently with minimal supervision.Understanding of CMM operationsEducation:TradeExperience:1-4 yearsQualifications:PC DMIS experience. (Desireable)CAD skills -Solid Works (Desireable)ISO 9000 and AS9100 experience a plusUnderstand Geometrical Dimensioning & Tolerance in accordance with ANSI Y14.5 Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      CMM Operators/Quality Inspectors are responsible for providing leadership and direction in support of the company's Quality Management System. This will require an individual who is a self-starter, motivated and multi-task oriented. Candidate should be experienced with inspections in a production/manufacturing environment. CMM Inspectors utilize a CMM for dimensional inspections, (detail parts, components, and assemblies) and provide reports to support inspections performed. Duties will include (but not limited to) receiving an inspection, in-process inspection, final inspection, disposition and control of nonconforming product, first article inspection and record keeping.Responsibilities:Be accountable for working safely by following all safety rules and safe work practices.Always consider safety before action.Operate CMM in automatic program mode, using (PC DMIS) programs.Manipulate CMM results using CADInspection and calibration of inspection fixtures and hand tools.Preparation of layout reports using the computer.Maintain department equipment. Communicate effectively with machinists and operators to maintain acceptable quality. Perform First Article Inspections by hand also with a variety of inspection tools.Must be a demonstrated team player with a positive attitude, superior work ethic, and able to solve issues respectfully with peers and management. Actively participate in continuous improvement initiatives such as 5S and Kaizen events along with zero Defect Quality Initiatives.Working hours: 8:00 AM - 5:00 PMSkills:Must be able to Read/Comprehend English instructions.Computer literate (spreadsheets and word processor)Strong written and oral communication skills and legible handwriting.Ability to work independently with minimal supervision.Understanding of CMM operationsEducation:TradeExperience:1-4 yearsQualifications:PC DMIS experience. (Desireable)CAD skills -Solid Works (Desireable)ISO 9000 and AS9100 experience a plusUnderstand Geometrical Dimensioning & Tolerance in accordance with ANSI Y14.5 Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.