You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    60 jobs found in Minnesota

    Filter4
    Clear all
      • Owatonna, Minnesota
      • Temp to Perm
      • $19.12 per hour
      • 6:00 AM - 6:00 PM (Various Shifts Available)
      Work for an outstanding, reputable company in Owatonna, MN. Start a new career today! ***Work 6:00 AM - 6:00 PM (rotating 4 days on, 4 days off)Weekly Pay!Purpose:Ensure that quality packaging materials are supplied to palletizing operations and transport pallets of finished cans to appropriate area of the warehouse.Responsibilities:Responsibilities:-Keep palletizer properly supplied with pallets, top frames, and slip sheets and ensure the quality of all materials.-Keep pallets aligned properly and remove jams as needed.-Make sure pallet inventory is properly sorted, with defective pallets stored in separate area.-Check conditions of forklift and perform basic P.M.?s at start of each shift.-Ensure strappers are full of banding material and pallets are flowing smoothly through lower conveying. Perform band tension check once per shift and document results on check sheet.-Inspect and transport finished pallets to warehouse, referring any H.F.I.s for proper disposition.-Maintain good housekeeping in lower conveying area.-Assist in other areas as needed to maintain a smooth flow of cans through the plant.Working hours: 6:00 AM - 6:00 PM (Various Shifts Available)Skills:-Forklift Experience-Organizational SkillsEducation:No Degree RequiredExperience:1-4 yearsQualifications:Qualifications:-Ability to safely operate all forklifts in plant.-High stacking, double tine experience preferred-Know how to fill tanks and do basic inspections of fork truck at shift start up.-Knowledge of can sizes, lacquer finishes and pack sizes.-Able to read and understand pallet tickets and date codes and production schedules.-Understand dunnage materials specifications, quality packaging requirements and H.F.I. procedures.-Basic understanding of can manufacturing process and quality can specifications.-Working knowledge of palletizing system and lower conveying.-Knowledge of safety regulations which apply to work functions. Work for a great local company in Owatonna, MN. Complete benefit package upon full time employment with the company. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for an outstanding, reputable company in Owatonna, MN. Start a new career today! ***Work 6:00 AM - 6:00 PM (rotating 4 days on, 4 days off)Weekly Pay!Purpose:Ensure that quality packaging materials are supplied to palletizing operations and transport pallets of finished cans to appropriate area of the warehouse.Responsibilities:Responsibilities:-Keep palletizer properly supplied with pallets, top frames, and slip sheets and ensure the quality of all materials.-Keep pallets aligned properly and remove jams as needed.-Make sure pallet inventory is properly sorted, with defective pallets stored in separate area.-Check conditions of forklift and perform basic P.M.?s at start of each shift.-Ensure strappers are full of banding material and pallets are flowing smoothly through lower conveying. Perform band tension check once per shift and document results on check sheet.-Inspect and transport finished pallets to warehouse, referring any H.F.I.s for proper disposition.-Maintain good housekeeping in lower conveying area.-Assist in other areas as needed to maintain a smooth flow of cans through the plant.Working hours: 6:00 AM - 6:00 PM (Various Shifts Available)Skills:-Forklift Experience-Organizational SkillsEducation:No Degree RequiredExperience:1-4 yearsQualifications:Qualifications:-Ability to safely operate all forklifts in plant.-High stacking, double tine experience preferred-Know how to fill tanks and do basic inspections of fork truck at shift start up.-Knowledge of can sizes, lacquer finishes and pack sizes.-Able to read and understand pallet tickets and date codes and production schedules.-Understand dunnage materials specifications, quality packaging requirements and H.F.I. procedures.-Basic understanding of can manufacturing process and quality can specifications.-Working knowledge of palletizing system and lower conveying.-Knowledge of safety regulations which apply to work functions. Work for a great local company in Owatonna, MN. Complete benefit package upon full time employment with the company. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $19.26 per hour
      • 6:00 PM - 6:00 AM (Various Shifts Available)
      Work for an outstanding, reputable company in Owatonna, MN. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off)Weekly Pay!Purpose: Ensure that quality packaging materials are supplied to palletizing operations and transport pallets of finished cans to appropriate area of the warehouse.Responsibilities:-Keep palletizer properly supplied with pallets, top frames, and slip sheets and ensure the quality of all materials.-Keep pallets aligned properly and remove jams as needed.-Make sure pallet inventory is properly sorted, with defective pallets stored in separate area.-Check conditions of forklift and perform basic P.M.?s at start of each shift.-Ensure strappers are full of banding material and pallets are flowing smoothly through lower conveying. Perform band tension check once per shift and document results on check sheet.-Inspect and transport finished pallets to warehouse, referring any H.F.I.s for proper disposition.-Maintain good housekeeping in lower conveying area.-Assist in other areas as needed to maintain a smooth flow of cans through the plant.Working hours: 6:00 PM - 6:00 AM (Various Shifts Available)Skills:-Forklift experienceEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Ability to safely operate all forklifts in plant.-High stacking, double tine experience preferred-Know how to fill tanks and do basic inspections of fork truck at shift start up.-Knowledge of can sizes, lacquer finishes and pack sizes.-Able to read and understand pallet tickets and date codes and production schedules.-Understand dunnage materials specifications, quality packaging requirements and H.F.I. procedures.-Basic understanding of can manufacturing process and quality can specifications.-Working knowledge of palletizing system and lower conveying.-Knowledge of safety regulations which apply to work functions. Work for a great local company in Owatonna, MN. Complete benefit package upon full time employment with the company. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for an outstanding, reputable company in Owatonna, MN. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off)Weekly Pay!Purpose: Ensure that quality packaging materials are supplied to palletizing operations and transport pallets of finished cans to appropriate area of the warehouse.Responsibilities:-Keep palletizer properly supplied with pallets, top frames, and slip sheets and ensure the quality of all materials.-Keep pallets aligned properly and remove jams as needed.-Make sure pallet inventory is properly sorted, with defective pallets stored in separate area.-Check conditions of forklift and perform basic P.M.?s at start of each shift.-Ensure strappers are full of banding material and pallets are flowing smoothly through lower conveying. Perform band tension check once per shift and document results on check sheet.-Inspect and transport finished pallets to warehouse, referring any H.F.I.s for proper disposition.-Maintain good housekeeping in lower conveying area.-Assist in other areas as needed to maintain a smooth flow of cans through the plant.Working hours: 6:00 PM - 6:00 AM (Various Shifts Available)Skills:-Forklift experienceEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Ability to safely operate all forklifts in plant.-High stacking, double tine experience preferred-Know how to fill tanks and do basic inspections of fork truck at shift start up.-Knowledge of can sizes, lacquer finishes and pack sizes.-Able to read and understand pallet tickets and date codes and production schedules.-Understand dunnage materials specifications, quality packaging requirements and H.F.I. procedures.-Basic understanding of can manufacturing process and quality can specifications.-Working knowledge of palletizing system and lower conveying.-Knowledge of safety regulations which apply to work functions. Work for a great local company in Owatonna, MN. Complete benefit package upon full time employment with the company. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $15.81 per hour
      • Various Shifts Available
      1 for 3rd shift (Monday - Thursday from 11pm to 7am) $15.81Operates machining centers, turning centers, centerless grinders and hand operations, by performing the following essential duties and responsibilities, but not limited to the followingResponsibilities:Will include, but not limited to the following areas:Perform change overs and operate work centers as instructed by the Production Team Leader.Setup and operate drill presses, hones and other hand and power tools. Look for and suggest improvements to processes and operations to the Production Team Leader.Seek assistance from a CNC Lead Setter when production issues arise.Monitor quality per ISO work instructions.Perform tool offset adjustments and tool changes as needed to maintain required quality of parts.Pack parts properly to prevent damage during transportation to next operation.Create Documents Change Request (DCR) using kbox when needed to correct or upgrade process documentation.Interpret blueprint and job specifications to determine dimensions and tolerances.Perform inspections and tests to ensure parts meet the quality dictated by associated technical documents.Operate equipment per written instructions.Read and operate inspection equipment to insure a quality product at all times.Assigned work area, tools and gauges will be clean, and kept neat, safe and orderly at all times.Follow all company policies and procedures and applicable laws.Will work overtime as requested by supervisor.Recognize and comply with all safety rules. Hearing and Eye protection will be worn when required.Working hours: Various Shifts AvailableSkills:TRAINING / SAFETY REQUIREMENTS:Employees must complete general safety training such as Right to Know (includes: Hazardous Communication, Emergency Response Plan, AWAIR, and Forklift & Pedestrian Safety) annually. The employee must follow the rules stated in our safety policies and programs including but not limited to the Shop Safety rules. The employee is to report any unsafe conditions, unsafe acts, near misses, illnesses, and injuries to their supervisor immediately.EDUCATION and/or EXPERIENCE: High School Diploma or GED.LANGUAGE SKILLS: Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent).REASONING ABILITY: Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS and ABILITIES: Ability to read blue prints and precision measuring tool/instruments. Ability to operate a computer and have working knowledge of Microsoft Word and Excel. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; and talk or hear. The employee is occasionally required to walk and reach with hands and arms.The employee must occasionally lift and/or move up to 50 pounds. The employee is required to request assistance for anything exceeding 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.Education:High SchoolExperience:1-4 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Don't Wait! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      1 for 3rd shift (Monday - Thursday from 11pm to 7am) $15.81Operates machining centers, turning centers, centerless grinders and hand operations, by performing the following essential duties and responsibilities, but not limited to the followingResponsibilities:Will include, but not limited to the following areas:Perform change overs and operate work centers as instructed by the Production Team Leader.Setup and operate drill presses, hones and other hand and power tools. Look for and suggest improvements to processes and operations to the Production Team Leader.Seek assistance from a CNC Lead Setter when production issues arise.Monitor quality per ISO work instructions.Perform tool offset adjustments and tool changes as needed to maintain required quality of parts.Pack parts properly to prevent damage during transportation to next operation.Create Documents Change Request (DCR) using kbox when needed to correct or upgrade process documentation.Interpret blueprint and job specifications to determine dimensions and tolerances.Perform inspections and tests to ensure parts meet the quality dictated by associated technical documents.Operate equipment per written instructions.Read and operate inspection equipment to insure a quality product at all times.Assigned work area, tools and gauges will be clean, and kept neat, safe and orderly at all times.Follow all company policies and procedures and applicable laws.Will work overtime as requested by supervisor.Recognize and comply with all safety rules. Hearing and Eye protection will be worn when required.Working hours: Various Shifts AvailableSkills:TRAINING / SAFETY REQUIREMENTS:Employees must complete general safety training such as Right to Know (includes: Hazardous Communication, Emergency Response Plan, AWAIR, and Forklift & Pedestrian Safety) annually. The employee must follow the rules stated in our safety policies and programs including but not limited to the Shop Safety rules. The employee is to report any unsafe conditions, unsafe acts, near misses, illnesses, and injuries to their supervisor immediately.EDUCATION and/or EXPERIENCE: High School Diploma or GED.LANGUAGE SKILLS: Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent).REASONING ABILITY: Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS and ABILITIES: Ability to read blue prints and precision measuring tool/instruments. Ability to operate a computer and have working knowledge of Microsoft Word and Excel. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; and talk or hear. The employee is occasionally required to walk and reach with hands and arms.The employee must occasionally lift and/or move up to 50 pounds. The employee is required to request assistance for anything exceeding 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.Education:High SchoolExperience:1-4 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Don't Wait! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $20.00 per hour
      • 4:45 PM - 3:15 AM
      This role will work with Area Leads to complete the stages to prepare and complete tasks to meetproduction timelines. They will work closely with Area Leads and Production Manager to ensuredepartment standards and schedules are met. The laser operation sets the pace for the front of the line.Responsibilities:Review and understand project specifications. Equipment operation for Saw, Plasma table, Press Brake, Iron worker/Shear. May provide support in welding and finishing in Fabrication area.Operate equipment in accordance with safety training and operational training. Inspect for final prep, load, and unload materials for projects. Will require forklift and overheadcrane operation which we will provide training for.??? Conduct training with co-workers on operational use of equipment. Including but not limited to:safety and required PPE, startup/shutdown processes, file upload, material loading/unloading,orienting material/clamping of material cutting condition, testing material cut conditions foroptimal cut, labeling of cut parts, inspection, and equipment maintenance requirements. Follow production schedule for laser processing, which can be subject to change daily due tonon-conformance components, quick ship orders, and cross value stream support. Perform quality assurance checks throughout processes.Working hours: 4:45 PM - 3:15 AMSkills:Ability to lift 25-50 pounds frequently.High level of attention to detail and accuracy.Demonstrated ability to execute on SOP, quality, and safety practices.Education:High SchoolExperience:0-1 yearsQualifications:Demonstrated ability to prioritize and manage workflow effectively to accomplish deadlines.Good communication skills.Must be a team player as they interface with multiple areas to complete tasks. Don't Wait! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This role will work with Area Leads to complete the stages to prepare and complete tasks to meetproduction timelines. They will work closely with Area Leads and Production Manager to ensuredepartment standards and schedules are met. The laser operation sets the pace for the front of the line.Responsibilities:Review and understand project specifications. Equipment operation for Saw, Plasma table, Press Brake, Iron worker/Shear. May provide support in welding and finishing in Fabrication area.Operate equipment in accordance with safety training and operational training. Inspect for final prep, load, and unload materials for projects. Will require forklift and overheadcrane operation which we will provide training for.??? Conduct training with co-workers on operational use of equipment. Including but not limited to:safety and required PPE, startup/shutdown processes, file upload, material loading/unloading,orienting material/clamping of material cutting condition, testing material cut conditions foroptimal cut, labeling of cut parts, inspection, and equipment maintenance requirements. Follow production schedule for laser processing, which can be subject to change daily due tonon-conformance components, quick ship orders, and cross value stream support. Perform quality assurance checks throughout processes.Working hours: 4:45 PM - 3:15 AMSkills:Ability to lift 25-50 pounds frequently.High level of attention to detail and accuracy.Demonstrated ability to execute on SOP, quality, and safety practices.Education:High SchoolExperience:0-1 yearsQualifications:Demonstrated ability to prioritize and manage workflow effectively to accomplish deadlines.Good communication skills.Must be a team player as they interface with multiple areas to complete tasks. Don't Wait! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 per hour
      • 4:45 PM - 3:15 AM
      Ooofda, what a GREAT opportunity! Spherion, in partnership with our client is seeking out paint preppers--is that you? If it is, we wanna talk, like right now!Shift: 2nd shift Mon-Thurs 4:30 pm - 3:00 am + OT on Friday -- $18/hourWorking as an integral part of the Paint Department team you will assist in preparing parts for liquid paint or powder coating operations as outlined by job specifications.Responsibilities:Utilize the various sanding and paint systems,Assist in maintaining clean equipment and boothsUnderstands the appropriate handling of hazardous wasteMaintain equipment in proper working order, perform routine calibrationReview and understand project specifications.Inspect for final prep, load, and unload paint and paint suppliesEnsure color and finish tolerances are met.Monitor paint and supply inventories and notify Lead of replenishment needs.Perform quality assurance checks throughout processes.Working hours: 4:45 PM - 3:15 AMSkills:- Ability to proficiently read and write English.- One year of experience in industrial or auto body painting.- Must be familiar with hazardous material handling and disposal regulations.- Ability to read, understand complex blueprints and project specifications.- Ability to maintain a high level of accuracy and attention to detail- Ability to read and execute on SOP, quality and safety processes.- Ability to work independently.- Good communication and team skills.Education:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Ability to lift 25-50 pounds frequently. Do you fit the bill? Then apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Ooofda, what a GREAT opportunity! Spherion, in partnership with our client is seeking out paint preppers--is that you? If it is, we wanna talk, like right now!Shift: 2nd shift Mon-Thurs 4:30 pm - 3:00 am + OT on Friday -- $18/hourWorking as an integral part of the Paint Department team you will assist in preparing parts for liquid paint or powder coating operations as outlined by job specifications.Responsibilities:Utilize the various sanding and paint systems,Assist in maintaining clean equipment and boothsUnderstands the appropriate handling of hazardous wasteMaintain equipment in proper working order, perform routine calibrationReview and understand project specifications.Inspect for final prep, load, and unload paint and paint suppliesEnsure color and finish tolerances are met.Monitor paint and supply inventories and notify Lead of replenishment needs.Perform quality assurance checks throughout processes.Working hours: 4:45 PM - 3:15 AMSkills:- Ability to proficiently read and write English.- One year of experience in industrial or auto body painting.- Must be familiar with hazardous material handling and disposal regulations.- Ability to read, understand complex blueprints and project specifications.- Ability to maintain a high level of accuracy and attention to detail- Ability to read and execute on SOP, quality and safety processes.- Ability to work independently.- Good communication and team skills.Education:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Ability to lift 25-50 pounds frequently. Do you fit the bill? Then apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $18.27 per hour
      • 6:00 PM - 6:00 AM
      The Lacquer Spray Machine (L.S.M.) Operators are responsible for the proper application of the lacquer spray coating to the inside of the can in compliance with quality control specifications. They have primary control of the processing of cans from the point of in-feeding of cans into the conveyer above the spray machines, until they reach the Internal Bake Ovens.***12 HR rotating shift (4 days on, 4 days off)Responsibilities:-Clearing can jams from Lacquer Spray Machines and from upper conveyors.-Check and monitor the following: overall quality and cleanliness of cans, lacquer pressure of machines, temperature, copper sulfate checks on flanges. -Complete and record required process control checks, including: metal exposure of cans, weight on lacquer on inside of cans, film weight distribution.-Maintain cleanliness of machines including the spray nozzles, turrent wheels, lacquer overspray boxes, machine exterior and general work area. Follow all safety procedures and PPE requirements.-Perform routine maintenance including the setting of guns, nozzles, can guides and spray delay.-Perform preventative maintenance which includes the replacement of drive and conveyor belts to the oven, tips, rails, guns, lacquer and vacuum filters.-Follow proper material handling procedures, which includes proper disposal of waste lacquer and labeling of waste barrels.-Perform Equipment Set-up Evaluations on LSMs after adjustment or changes are made.-Monitor and assist other production processes on the Back End to ensure a constant flow of cans into and through the LSM process.-Other duties as required.Working hours: 6:00 PM - 6:00 AMSkills:-Basic mechanical skills-Computer skills to perform data entryEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Knowledge of SPC programs and be able to interpret SPC data for trends, principles graphs charts.-Know how to complete and document an ESE for the LSMs.-Working knowledge of the operation, setup, preventative maintenance & repair, and troubleshooting in the LSM process. This position is a full time opportunity for a great company with great benefits. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Lacquer Spray Machine (L.S.M.) Operators are responsible for the proper application of the lacquer spray coating to the inside of the can in compliance with quality control specifications. They have primary control of the processing of cans from the point of in-feeding of cans into the conveyer above the spray machines, until they reach the Internal Bake Ovens.***12 HR rotating shift (4 days on, 4 days off)Responsibilities:-Clearing can jams from Lacquer Spray Machines and from upper conveyors.-Check and monitor the following: overall quality and cleanliness of cans, lacquer pressure of machines, temperature, copper sulfate checks on flanges. -Complete and record required process control checks, including: metal exposure of cans, weight on lacquer on inside of cans, film weight distribution.-Maintain cleanliness of machines including the spray nozzles, turrent wheels, lacquer overspray boxes, machine exterior and general work area. Follow all safety procedures and PPE requirements.-Perform routine maintenance including the setting of guns, nozzles, can guides and spray delay.-Perform preventative maintenance which includes the replacement of drive and conveyor belts to the oven, tips, rails, guns, lacquer and vacuum filters.-Follow proper material handling procedures, which includes proper disposal of waste lacquer and labeling of waste barrels.-Perform Equipment Set-up Evaluations on LSMs after adjustment or changes are made.-Monitor and assist other production processes on the Back End to ensure a constant flow of cans into and through the LSM process.-Other duties as required.Working hours: 6:00 PM - 6:00 AMSkills:-Basic mechanical skills-Computer skills to perform data entryEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Knowledge of SPC programs and be able to interpret SPC data for trends, principles graphs charts.-Know how to complete and document an ESE for the LSMs.-Working knowledge of the operation, setup, preventative maintenance & repair, and troubleshooting in the LSM process. This position is a full time opportunity for a great company with great benefits. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $18.27 per hour
      • 6:00 PM - 6:00 AM
      ***Rotating 12 HR Shift (4 days on, 4 days off)To safely operate the palletizing machinery ensuring that only quality finished cans are properly loaded and packaged on pallets for shipment to the customer.Responsibilities:-Operate the controls of the palletizing machine so that the proper configuration of cans, slip sheets and top frames are loaded onto each pallet, making sure each pallet has the proper pallet ticket attached.-Stand up tipped cans, replace voids and remove jams to maintain standard production.-Visually examine cans for defects and discard as appropriate. Monitor larger patterns to see if pallet is properly packed and replace missing cans.-Visually examine pallets, top frames and slip-sheets and remove if defective.-Check drops and conveyor system when flow is stopped and clear minor jams as necessary.-Report equipment malfunctions or can quality issues to the Team Leader or Back End Maintainer.-Maintain cleanliness of work area and follow safe working procedures. Report unsafe conditions immediately to the Team Leader.-Maintain proper production ticket printing records.-Complete all required process control checks as specified.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical aptitude -Data entry skills-Basic computer skills-General manufacturing skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Able to read and understand date codes and pallet tickets, know how to operate computer to generate pallet tickets and the procedures for application.-Know and understand overall can quality requirements and be capable for identifying defects.-Know the quality requirements of dunnage (pallets, slip sheets, top frames).-Ability to operate palletizer controls and know the procedures to troubleshoot and correct problems in the palletizing process.-Know how to clear jams out of strappers. This is a long term, full time position with a great company. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      ***Rotating 12 HR Shift (4 days on, 4 days off)To safely operate the palletizing machinery ensuring that only quality finished cans are properly loaded and packaged on pallets for shipment to the customer.Responsibilities:-Operate the controls of the palletizing machine so that the proper configuration of cans, slip sheets and top frames are loaded onto each pallet, making sure each pallet has the proper pallet ticket attached.-Stand up tipped cans, replace voids and remove jams to maintain standard production.-Visually examine cans for defects and discard as appropriate. Monitor larger patterns to see if pallet is properly packed and replace missing cans.-Visually examine pallets, top frames and slip-sheets and remove if defective.-Check drops and conveyor system when flow is stopped and clear minor jams as necessary.-Report equipment malfunctions or can quality issues to the Team Leader or Back End Maintainer.-Maintain cleanliness of work area and follow safe working procedures. Report unsafe conditions immediately to the Team Leader.-Maintain proper production ticket printing records.-Complete all required process control checks as specified.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical aptitude -Data entry skills-Basic computer skills-General manufacturing skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Able to read and understand date codes and pallet tickets, know how to operate computer to generate pallet tickets and the procedures for application.-Know and understand overall can quality requirements and be capable for identifying defects.-Know the quality requirements of dunnage (pallets, slip sheets, top frames).-Ability to operate palletizer controls and know the procedures to troubleshoot and correct problems in the palletizing process.-Know how to clear jams out of strappers. This is a long term, full time position with a great company. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $15.00 per hour
      • 3:30 PM - 2:00 AM
      Jobs! Jobs! Jobs! Did you know, Spherion has partned with a fabulous electronics manufacturer right here in Mankato; we are seeking out both skilled and entry-level assemblers to work on their afternoon shift. This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 3:30 PM - 2:00 AMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Jobs! Jobs! Jobs! Did you know, Spherion has partned with a fabulous electronics manufacturer right here in Mankato; we are seeking out both skilled and entry-level assemblers to work on their afternoon shift. This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 3:30 PM - 2:00 AMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Sueur, Minnesota
      • Temp to Perm
      • $16.00 - $17.25 per hour
      • Various Shifts Available
      We have a client in Le Sueur looking for production workers, on all of their shifts! This client is offering full-time, long-term positions with opporrtunity to convert to full-time and take on their fabulous benefitts! If you're honest, hardworking, treat others with respect, and want the opportunity to learn and grow, we want to talk to you.SHIFTS AVAILABLE;- 1st Shift (Mon - Thur 5:00am - 3:20 pm) $16.00- 2nd Shift (Mon - Thur 3:00 pm to 1:20 am) +1.25/hr- 3rd Shift (Mon - Thur 9:00 pm to 5:20 am) +1.25/hrResponsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions. Set up and use various tools to finish edges, glue, remove flash, clear holes, saw, sand, straighten, assemble, grind, trim and pack product into shipping cartons.Operate pallet jack, etc., to load and unload trucks or transport raw material, supplies, and products. May operate a forklift after formal training.Stand, bend, twist and work at an assigned workstation(s). Processes and operations may be repetitive.Perform mechanical and safety inspections as well as basic maintenance.Work is generally concentrated on similar machines and processes, and operations. Assist elsewhere whenever and wherever needed.All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have a client in Le Sueur looking for production workers, on all of their shifts! This client is offering full-time, long-term positions with opporrtunity to convert to full-time and take on their fabulous benefitts! If you're honest, hardworking, treat others with respect, and want the opportunity to learn and grow, we want to talk to you.SHIFTS AVAILABLE;- 1st Shift (Mon - Thur 5:00am - 3:20 pm) $16.00- 2nd Shift (Mon - Thur 3:00 pm to 1:20 am) +1.25/hr- 3rd Shift (Mon - Thur 9:00 pm to 5:20 am) +1.25/hrResponsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions. Set up and use various tools to finish edges, glue, remove flash, clear holes, saw, sand, straighten, assemble, grind, trim and pack product into shipping cartons.Operate pallet jack, etc., to load and unload trucks or transport raw material, supplies, and products. May operate a forklift after formal training.Stand, bend, twist and work at an assigned workstation(s). Processes and operations may be repetitive.Perform mechanical and safety inspections as well as basic maintenance.Work is generally concentrated on similar machines and processes, and operations. Assist elsewhere whenever and wherever needed.All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Sueur, Minnesota
      • Temp to Perm
      • $17.00 - $18.50 per hour
      • Various Shifts Available
      Spherion with another great manufacturing opportunity for you, this one is for a few skilled production operators. This client is willing to train those with no CNC or machining experience, which is great! In this role you will be: assisting with setup, responsible for quality of work and to appropriately resolve unusual operating conditions.SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $17.002nd shift 3:00 pm - 11:20 pm Mon- Fri - $18.50Responsibilities:Proficiently operates molding, injection, machining, casting, CNC and other manufacturing machines.Rotates to operate on various machines and various processes to fabricate products ranging from simple to elaborate. Generally works at an assigned work station. Does Not ordinarily perform machine setups, but does assist. Maintains equipment and performs lesser repairs.Inspects for quality, defects, and deviations from specifications. Responsible for quality of work and to appropriately resolve unusual operating conditions. Work is generally concentrated on similar machines and processes and operations.May assemble, pack and/or package a wide variety of products or materials. May occasionally operate a forklift. All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English, independent decision making, effective self- management, proven machine operations and/or mechanical aptitude.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs.High School Diploma or GED Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion with another great manufacturing opportunity for you, this one is for a few skilled production operators. This client is willing to train those with no CNC or machining experience, which is great! In this role you will be: assisting with setup, responsible for quality of work and to appropriately resolve unusual operating conditions.SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $17.002nd shift 3:00 pm - 11:20 pm Mon- Fri - $18.50Responsibilities:Proficiently operates molding, injection, machining, casting, CNC and other manufacturing machines.Rotates to operate on various machines and various processes to fabricate products ranging from simple to elaborate. Generally works at an assigned work station. Does Not ordinarily perform machine setups, but does assist. Maintains equipment and performs lesser repairs.Inspects for quality, defects, and deviations from specifications. Responsible for quality of work and to appropriately resolve unusual operating conditions. Work is generally concentrated on similar machines and processes and operations.May assemble, pack and/or package a wide variety of products or materials. May occasionally operate a forklift. All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English, independent decision making, effective self- management, proven machine operations and/or mechanical aptitude.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs.High School Diploma or GED Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Sueur, Minnesota
      • Temp to Perm
      • $13.50 - $14.50 per hour
      • Various Shifts Available
      Spherion with another great entry-level opportunity for you, this one is entry-level. Learn to work in a growing manufacturing facility offering long-term positions with the opportunity to roll over to full-time. This client is willing to train those with no manufacturing experience, which is great!SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $13.502nd shift 3:00 pm - 11:20 pm Mon- Fri - $14.503rd shift 11:00 pm - 7:20 am Mon - Fri - $14.50Responsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions.Operate pallet jack, etc. to load and unload trucks or transport raw material, supplies and products.Set up and use a variety of powered or hand tools to finish edges, glue, remove flash, clear holes, assemble, trim and pack product or parts into shipping cartons.Stand and work at an assigned workstation (s). Processes and operations may be repetitive.Assist elsewhere whenever and wherever needed.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion with another great entry-level opportunity for you, this one is entry-level. Learn to work in a growing manufacturing facility offering long-term positions with the opportunity to roll over to full-time. This client is willing to train those with no manufacturing experience, which is great!SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $13.502nd shift 3:00 pm - 11:20 pm Mon- Fri - $14.503rd shift 11:00 pm - 7:20 am Mon - Fri - $14.50Responsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions.Operate pallet jack, etc. to load and unload trucks or transport raw material, supplies and products.Set up and use a variety of powered or hand tools to finish edges, glue, remove flash, clear holes, assemble, trim and pack product or parts into shipping cartons.Stand and work at an assigned workstation (s). Processes and operations may be repetitive.Assist elsewhere whenever and wherever needed.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Blue Earth, Minnesota
      • Temp to Perm
      • $15.00 per hour
      • 2:30 PM - 11:00 PM
      Spherion has partnered with a manufacturing client in Blue Earth, MN to fill their mixing and labor positions on 2nd shift! These positions offer full-time hours and are temp to hire! The Production Laborer is responsible for performing duties to load and unload mixing machines with large sacks of food ingredients as is consistent with specifications.Responsibilities:Follow mixing instructions Verify ingredients and cut open bags of ingredientsLoad and unload ingredientsSet-up mixing machine, turn on timer, and operate dischargerEnsure products produced meet quality and food safety standardsCheck yields and investigate discrepanciesMaintain accurate production recordsAssist in cleaning equipmentNotify supervisor of unusual problems, delays, and/or safety issuesFollow SOPs, GMPs safety rules, sanitation rules, good housekeeping procedures, and company rules of conductWorking hours: 2:30 PM - 11:00 PMSkills:Ability to work independently.Education:No Degree RequiredExperience:1-4 yearsQualifications:This position requires frequent moving and constant exertion of heavy physical effort. Prior experience in a position requiring heavy lifting is desirable.Ability to work in a standing position, climb stairs, and lift or move 50 - 56 pounds with or without reasonable accommodation is required. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has partnered with a manufacturing client in Blue Earth, MN to fill their mixing and labor positions on 2nd shift! These positions offer full-time hours and are temp to hire! The Production Laborer is responsible for performing duties to load and unload mixing machines with large sacks of food ingredients as is consistent with specifications.Responsibilities:Follow mixing instructions Verify ingredients and cut open bags of ingredientsLoad and unload ingredientsSet-up mixing machine, turn on timer, and operate dischargerEnsure products produced meet quality and food safety standardsCheck yields and investigate discrepanciesMaintain accurate production recordsAssist in cleaning equipmentNotify supervisor of unusual problems, delays, and/or safety issuesFollow SOPs, GMPs safety rules, sanitation rules, good housekeeping procedures, and company rules of conductWorking hours: 2:30 PM - 11:00 PMSkills:Ability to work independently.Education:No Degree RequiredExperience:1-4 yearsQualifications:This position requires frequent moving and constant exertion of heavy physical effort. Prior experience in a position requiring heavy lifting is desirable.Ability to work in a standing position, climb stairs, and lift or move 50 - 56 pounds with or without reasonable accommodation is required. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Blue Earth, Minnesota
      • Temp to Perm
      • $17.00 per hour
      • 11:00 PM - 7:00 AM
      Calling all of your production folks in the Blue Earth area -- we have some long-term general laborer roles available on the overnight shift with a large food manufacturer. The General Laborer position has two main job components: 1) basic line tasks on our cereal/ingredient packaging lines, and 2) cleaning tasks. All GL's rotate assignments throughout each workday. 3rd Shift 10:50PM-7AMResponsibilities:Palletize, shrink wrap, and record and certify quantities.Perform cleaning duties such as sweeping and sanitizing. Cleaning duties often require working at heights using a scissor-lift. During changeovers, GL???s may work entire shifts of cleaning duties. Perform varied line duties such as checking code dates, aligning bags on conveyors, refilling cardboard stock, moving product and materials with a pallet jack, filling and weighing bulk product containers, assembling boxes, etc. Other duties as assigned.Working hours: 11:00 PM - 7:00 AMSkills:Ability to communicate verbally and in written form.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED preferred, but not required.Must be able to tolerate the above-listed physical and environmental demands of this position with or without accommodations.Must have some work experience doing manual labor within the last 5 years.Previous manufacturing experience preferred. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Calling all of your production folks in the Blue Earth area -- we have some long-term general laborer roles available on the overnight shift with a large food manufacturer. The General Laborer position has two main job components: 1) basic line tasks on our cereal/ingredient packaging lines, and 2) cleaning tasks. All GL's rotate assignments throughout each workday. 3rd Shift 10:50PM-7AMResponsibilities:Palletize, shrink wrap, and record and certify quantities.Perform cleaning duties such as sweeping and sanitizing. Cleaning duties often require working at heights using a scissor-lift. During changeovers, GL???s may work entire shifts of cleaning duties. Perform varied line duties such as checking code dates, aligning bags on conveyors, refilling cardboard stock, moving product and materials with a pallet jack, filling and weighing bulk product containers, assembling boxes, etc. Other duties as assigned.Working hours: 11:00 PM - 7:00 AMSkills:Ability to communicate verbally and in written form.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED preferred, but not required.Must be able to tolerate the above-listed physical and environmental demands of this position with or without accommodations.Must have some work experience doing manual labor within the last 5 years.Previous manufacturing experience preferred. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $20.95 per hour
      • 6:00 PM - 6:00 AM
      The Front End Maintainers initiate the can making process. Steel coils are transported by a forklift to the up-ender where they are tipped on to their side. They are then transported again by coil car to the unwinder where they are mounted in place. Two Front End Maintainers guide the steel sheet through the lubricator and into the press. From this point the Machine Maintenance Technicians are responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.***The Machine Maintenance Technicians work 12-hour shifts (4 days on, 4 days off).Responsibilities:-Inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.-Set-up, maintenance and operation of the upender, unwinder, lubricator, and cupping press.-Set-up maintenance and operation of the body makers, trimmers, and conveying systems.-Inspect and monitor, then enter into computer the following can specifications: flange wall thickness, mid-wall thickness, dome depth, trim can height-Perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.-Assist in other areas as needed to maintain smooth can flow through the plant.-Complete required paperwork and documentation such as coil log, check sheets, etc.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Performs other job-related duties as required or assigned.Working hours: 6:00 PM - 6:00 AMSkills:-Advanced mechanical skills (working knowledge of pneumatics and hydraulics)-Basic computer skillsEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Thorough knowledge and understanding of can and end manufacturing process, equipment, and quality specifications.-Ability to demonstrate strong mechanical aptitude on all machines in the plant, depending on the primary area of responsibility assigned.-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. This is a direct hire opportunity for a company with great benefits! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Front End Maintainers initiate the can making process. Steel coils are transported by a forklift to the up-ender where they are tipped on to their side. They are then transported again by coil car to the unwinder where they are mounted in place. Two Front End Maintainers guide the steel sheet through the lubricator and into the press. From this point the Machine Maintenance Technicians are responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.***The Machine Maintenance Technicians work 12-hour shifts (4 days on, 4 days off).Responsibilities:-Inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.-Set-up, maintenance and operation of the upender, unwinder, lubricator, and cupping press.-Set-up maintenance and operation of the body makers, trimmers, and conveying systems.-Inspect and monitor, then enter into computer the following can specifications: flange wall thickness, mid-wall thickness, dome depth, trim can height-Perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.-Assist in other areas as needed to maintain smooth can flow through the plant.-Complete required paperwork and documentation such as coil log, check sheets, etc.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Performs other job-related duties as required or assigned.Working hours: 6:00 PM - 6:00 AMSkills:-Advanced mechanical skills (working knowledge of pneumatics and hydraulics)-Basic computer skillsEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Thorough knowledge and understanding of can and end manufacturing process, equipment, and quality specifications.-Ability to demonstrate strong mechanical aptitude on all machines in the plant, depending on the primary area of responsibility assigned.-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. This is a direct hire opportunity for a company with great benefits! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $16.50 per hour
      • 6:00 AM - 4:30 PM
      Performs assembly of mechanical and electromechanical component parts and or/upholstered parts.ASSEMBLER HOURS ARE MONDAY THROUGH THURSDAY; 6 AM UNTIL 4:30 PM. OVERTIME IS DONE ON FRIDAYS.Responsibilities:-Assembles various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.-Analyzes rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.-Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.-Maintains a safe and clean working environment.-Perform other duties as assigned.Working hours: 6:00 AM - 4:30 PMSkills:-Mechanical aptitude-Understanding of safetyEducation:High SchoolExperience:0-1 yearsQualifications:-High School Diploma or equivalent-Previous experience in manufacturing environment -Ability to read blueprints-Experience with hand tools Apply Today! Urgently hiring multiple candidates.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Performs assembly of mechanical and electromechanical component parts and or/upholstered parts.ASSEMBLER HOURS ARE MONDAY THROUGH THURSDAY; 6 AM UNTIL 4:30 PM. OVERTIME IS DONE ON FRIDAYS.Responsibilities:-Assembles various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.-Analyzes rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.-Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.-Maintains a safe and clean working environment.-Perform other duties as assigned.Working hours: 6:00 AM - 4:30 PMSkills:-Mechanical aptitude-Understanding of safetyEducation:High SchoolExperience:0-1 yearsQualifications:-High School Diploma or equivalent-Previous experience in manufacturing environment -Ability to read blueprints-Experience with hand tools Apply Today! Urgently hiring multiple candidates.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $16.50 per hour
      • 2:30 PM - 1:00 AM
      NEW PAY RATE ALERT! Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assembly.All other duties as assigned by your manager. ValuesWorking hours: 2:30 PM - 1:00 AMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      NEW PAY RATE ALERT! Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assembly.All other duties as assigned by your manager. ValuesWorking hours: 2:30 PM - 1:00 AMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Temp to Perm
      • $18.00 per hour
      • 2:30 PM - 1:00 AM
      A leader in portable and permanent power distribution solutions. The Distro Assembler will be responsible for building small electrical boxes to very large boxes. Must be able to follow blue pints and directions. This is a physical position.Responsibilities:Building small to very large boxesRead and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsPerform other duties and projects as assignedWorking hours: 2:30 PM - 1:00 AMSkills:-Ability to read instructions, safely operate machines and visually inspect parts produced-Accuracy and timeliness in completion of work assignments is a must-Excellent communication skills-Frequent lifting, standing, and bending required-Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts-Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices We value our employees and look for people that want to grow with our company. We have a very clean new plant with super helpful friendly Supervisors! A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A leader in portable and permanent power distribution solutions. The Distro Assembler will be responsible for building small electrical boxes to very large boxes. Must be able to follow blue pints and directions. This is a physical position.Responsibilities:Building small to very large boxesRead and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsPerform other duties and projects as assignedWorking hours: 2:30 PM - 1:00 AMSkills:-Ability to read instructions, safely operate machines and visually inspect parts produced-Accuracy and timeliness in completion of work assignments is a must-Excellent communication skills-Frequent lifting, standing, and bending required-Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts-Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices We value our employees and look for people that want to grow with our company. We have a very clean new plant with super helpful friendly Supervisors! A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Temp to Perm
      • $17.00 per hour
      • 6:00 AM - 2:30 PM
      A leader in portable and permanent power distribution solutions. Under the direction of the Supervisor and/or the Value Stream Manager, the Ditro Assembler will be responsible for building small electrical boxes to very large boxes. Must be able to follow blue pints and directions. This is a physical position.Responsibilities:?Building small to very large boxes?Read and interpret engineering drawings as needed for accurate and safe performance of the job?Following Standard Operating Procedures and/or Standard Work?Ensure a high level of quality by completing required in-process quality checks?Follow work order directions and safely produce the quantity of parts required and within the required specifications?Complete and maintain all required paperwork necessary in the operation?Operate specific assembly tools?Perform other duties and projects as assignedWorking hours: 6:00 AM - 2:30 PMSkills:--Ability to read instructions, safely operate machines and visually inspect parts produced--Accuracy and timeliness in completion of work assignments is a must--Excellent communication skills--Frequent lifting, standing, and bending required--Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts--Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. ?Basic understanding & reading of specifications & blueprints?Basic understanding of assembly?Basic understanding of basic electrical assembly?Knowledge of assembly practices CALL TO ACTION:We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A leader in portable and permanent power distribution solutions. Under the direction of the Supervisor and/or the Value Stream Manager, the Ditro Assembler will be responsible for building small electrical boxes to very large boxes. Must be able to follow blue pints and directions. This is a physical position.Responsibilities:?Building small to very large boxes?Read and interpret engineering drawings as needed for accurate and safe performance of the job?Following Standard Operating Procedures and/or Standard Work?Ensure a high level of quality by completing required in-process quality checks?Follow work order directions and safely produce the quantity of parts required and within the required specifications?Complete and maintain all required paperwork necessary in the operation?Operate specific assembly tools?Perform other duties and projects as assignedWorking hours: 6:00 AM - 2:30 PMSkills:--Ability to read instructions, safely operate machines and visually inspect parts produced--Accuracy and timeliness in completion of work assignments is a must--Excellent communication skills--Frequent lifting, standing, and bending required--Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts--Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. ?Basic understanding & reading of specifications & blueprints?Basic understanding of assembly?Basic understanding of basic electrical assembly?Knowledge of assembly practices CALL TO ACTION:We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Temp to Perm
      • $17.00 per hour
      • 5:00 AM - 2:30 PM
      Pre Assembler will be working with hand tools and looking at sales order sheets. This is a very hands on position and can be physical at times. The candidate needs to be able to communicate, read and follow directions. This is a standing position for 8hrs or more.Responsibilities:Pre Assembler will be working with hand tools and looking at sales order sheets. Read and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsSome electrical wiringPerform other duties and projects as assignedWorking hours: 5:00 AM - 2:30 PMSkills:-Ability to read instructions, safely operate machines and visually inspect parts produced-Accuracy and timeliness in completion of work assignments is a must-Excellent communication skills-Frequent lifting, standing, and bending required-Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts-Attention to detail is a mustEducation:No Degree RequiredExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices LOVE YOUR JOB! Everyone we place here says they LOVE their job! CLEAN, NEW, TEMPURATURE CONTROLLED FACILITY, with thee friendliest staff! These are PERMANENT POSITIONS! We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Pre Assembler will be working with hand tools and looking at sales order sheets. This is a very hands on position and can be physical at times. The candidate needs to be able to communicate, read and follow directions. This is a standing position for 8hrs or more.Responsibilities:Pre Assembler will be working with hand tools and looking at sales order sheets. Read and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsSome electrical wiringPerform other duties and projects as assignedWorking hours: 5:00 AM - 2:30 PMSkills:-Ability to read instructions, safely operate machines and visually inspect parts produced-Accuracy and timeliness in completion of work assignments is a must-Excellent communication skills-Frequent lifting, standing, and bending required-Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts-Attention to detail is a mustEducation:No Degree RequiredExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices LOVE YOUR JOB! Everyone we place here says they LOVE their job! CLEAN, NEW, TEMPURATURE CONTROLLED FACILITY, with thee friendliest staff! These are PERMANENT POSITIONS! We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 - $21.00 per hour
      • 6:00 PM - 6:00 PM
      Are you a night owl? Do you know someone who is a night owl, only seeking out work when the sun goes down? We are working with a large manufacturer right here in central Mankato offering full-time positions on nights. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.2 days on, 2 days off, 3 days on, 2 days off, rotating shift - 6PM - 6AM;Responsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 PM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you a night owl? Do you know someone who is a night owl, only seeking out work when the sun goes down? We are working with a large manufacturer right here in central Mankato offering full-time positions on nights. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.2 days on, 2 days off, 3 days on, 2 days off, rotating shift - 6PM - 6AM;Responsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 PM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 - $21.00 per hour
      • 6:00 AM - 6:00 PM
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 AM - 4:30 PM
      If you are looking to put your mechanical aptitude to the test, we have the perfect opportunity for you; we are looking for assemblers who are comfortable navigating blueprints and using hand tools. This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 6AM - 4:30PM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 6:00 AM - 4:30 PMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      If you are looking to put your mechanical aptitude to the test, we have the perfect opportunity for you; we are looking for assemblers who are comfortable navigating blueprints and using hand tools. This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 6AM - 4:30PM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 6:00 AM - 4:30 PMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $19.00 per hour
      • 4:30 PM - 3:00 AM
      Hi, hi, you mechanical genius. You, the person comfortable working from prints, and using basic hand tools; we have the perfect opportunity for you! We are looking for assemblers who want to work right here in Mankato -- for client that just did a payrate overhaul! This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 4:30PM-3:00AM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 4:30 PM - 3:00 AMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Hi, hi, you mechanical genius. You, the person comfortable working from prints, and using basic hand tools; we have the perfect opportunity for you! We are looking for assemblers who want to work right here in Mankato -- for client that just did a payrate overhaul! This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 4:30PM-3:00AM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 4:30 PM - 3:00 AMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Perham, Minnesota
      • Temp to Perm
      • $16.38 - $22.27 per hour
      • Various Shifts Available
      Spherion is currently hiring for a variety of machine operator, general labor, warehouse and maintenance positions for a food manufacturing company in the Perham area. This is a great opportunity to work with a top employer in the area that offers opportunity for advancement, great pay, benefits and an excellent employee culture. Applicants that are interested in working a mid or overnight position are encouraged to apply.Responsibilities:Operate a variety of machinery and equipment to assist with the food manufacturing process. Multiple positions open from bagger operators and operators within the mill.Prior forklift experience for warehouse positionsGeneral labor positions responsible for palletizing bags of completed product and doing general cleaning of the production floorWorking hours: Various Shifts AvailableSkills:Mechanically inclinedAbility to follow written direction Good communication skillsEducation:High SchoolExperience:0-1 yearsQualifications:Highly reliableWillingness to learnAbility to lift up to 50-60lbs repetitivelyAbility to stand 8-10hrs per dayRepetitive hand motions To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is currently hiring for a variety of machine operator, general labor, warehouse and maintenance positions for a food manufacturing company in the Perham area. This is a great opportunity to work with a top employer in the area that offers opportunity for advancement, great pay, benefits and an excellent employee culture. Applicants that are interested in working a mid or overnight position are encouraged to apply.Responsibilities:Operate a variety of machinery and equipment to assist with the food manufacturing process. Multiple positions open from bagger operators and operators within the mill.Prior forklift experience for warehouse positionsGeneral labor positions responsible for palletizing bags of completed product and doing general cleaning of the production floorWorking hours: Various Shifts AvailableSkills:Mechanically inclinedAbility to follow written direction Good communication skillsEducation:High SchoolExperience:0-1 yearsQualifications:Highly reliableWillingness to learnAbility to lift up to 50-60lbs repetitivelyAbility to stand 8-10hrs per dayRepetitive hand motions To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Perham, Minnesota
      • Temp to Perm
      • $16.50 per hour
      • 6:00 AM - 4:00 PM
      Do you enjoy doing repetitive work? Do you want to learn a new trade and start your career in manufacturing? Spherion Staffing is currently hiring general laborers to work with an industrial client. Ideal candidates will have an attention for detail, willingness to learn and grow with an industry leading company.Responsibilities:- Hanging, sanding, blowoff, tac off, packaging, indexing products- Follow control plans for customer product making sure that production and quality demands are met- Works diligently to achieve daily production demands- Works daily to improve production rejects- Report in a timely manner production issues, materials required and other production related information to the Production Supervisor- Performs tasks in a safe, efficient and timely manner.- Completes additional duties as required.- Follow all work instruction related to job responsibilities in each areaWorking hours: 6:00 AM - 4:00 PMSkills:- Team player- Good oral and written communication skillsEducation:High SchoolExperience:0-1 yearsQualifications:- Ability to work in a safe and efficient manner- Ability to lift up to 50 lbsSchedule:Mon - Thurs 6 am - 4 pm, Fridays OT as needed To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Do you enjoy doing repetitive work? Do you want to learn a new trade and start your career in manufacturing? Spherion Staffing is currently hiring general laborers to work with an industrial client. Ideal candidates will have an attention for detail, willingness to learn and grow with an industry leading company.Responsibilities:- Hanging, sanding, blowoff, tac off, packaging, indexing products- Follow control plans for customer product making sure that production and quality demands are met- Works diligently to achieve daily production demands- Works daily to improve production rejects- Report in a timely manner production issues, materials required and other production related information to the Production Supervisor- Performs tasks in a safe, efficient and timely manner.- Completes additional duties as required.- Follow all work instruction related to job responsibilities in each areaWorking hours: 6:00 AM - 4:00 PMSkills:- Team player- Good oral and written communication skillsEducation:High SchoolExperience:0-1 yearsQualifications:- Ability to work in a safe and efficient manner- Ability to lift up to 50 lbsSchedule:Mon - Thurs 6 am - 4 pm, Fridays OT as needed To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Frazee, Minnesota
      • Temp to Perm
      • $15.00 - $25.00 per hour
      • 7:00 AM - 3:30 PM
      Spherion Staffing is currently seeking experienced CNC Machine Operators to work at a client location. The ideal candidate will have prior experience tending machines with set up experience being ideal. Client is willing to train if applicant is passionate and driven to learn. Direct hire or Temp to Hire opportunities available depending on level of experience.Responsibilities:-Operate CNC lathe and mill in a safe and efficient manner-Perform tool wear offsets-Perform daily and regular cleaning and light maintenance tasks on CNC machinery-Assist in the organization and maintenance of the shop environment-Provide feedback and input into process improvement within department-QC parts against customer orders-Fill out required paperwork and documentationWorking hours: 7:00 AM - 3:30 PMSkills:-Ability to read and interpret blue prints-Experience with calipers, micrometers, measuring tools-Excellent communication and listening skillsEducation:High SchoolExperience:1-4 yearsQualifications:-Self sufficient-Team player-Mathematical aptitude-Ability to use jib To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is currently seeking experienced CNC Machine Operators to work at a client location. The ideal candidate will have prior experience tending machines with set up experience being ideal. Client is willing to train if applicant is passionate and driven to learn. Direct hire or Temp to Hire opportunities available depending on level of experience.Responsibilities:-Operate CNC lathe and mill in a safe and efficient manner-Perform tool wear offsets-Perform daily and regular cleaning and light maintenance tasks on CNC machinery-Assist in the organization and maintenance of the shop environment-Provide feedback and input into process improvement within department-QC parts against customer orders-Fill out required paperwork and documentationWorking hours: 7:00 AM - 3:30 PMSkills:-Ability to read and interpret blue prints-Experience with calipers, micrometers, measuring tools-Excellent communication and listening skillsEducation:High SchoolExperience:1-4 yearsQualifications:-Self sufficient-Team player-Mathematical aptitude-Ability to use jib To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Perham, Minnesota
      • Temp to Perm
      • $18.00 per hour
      • 6:00 PM - 12:00 AM
      Spherion is looking to fill a temporary cleaning project. This is a 4 week position where you would be required to do a detailed and thorough cleaning for a manufacturing company. Prior cleaning experience would be nice to have but not required.Responsibilities:Use basic cleaning supplies to detail clean powder room Clean in tight spaces or crevassesWorking hours: 6:00 PM - 12:00 AMSkills:Detail orientatedReliableAbility to work independentlyEducation:High SchoolExperience:0-1 yearsQualifications:Ability to work entire 4 week project To be considered, please apply online at www.spherion.com/perhamIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is looking to fill a temporary cleaning project. This is a 4 week position where you would be required to do a detailed and thorough cleaning for a manufacturing company. Prior cleaning experience would be nice to have but not required.Responsibilities:Use basic cleaning supplies to detail clean powder room Clean in tight spaces or crevassesWorking hours: 6:00 PM - 12:00 AMSkills:Detail orientatedReliableAbility to work independentlyEducation:High SchoolExperience:0-1 yearsQualifications:Ability to work entire 4 week project To be considered, please apply online at www.spherion.com/perhamIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Dalton, Minnesota
      • Temp to Perm
      • $15.00 - $17.00 per hour
      • 6:00 AM - 4:30 PM
      Do you pride yourself in your work? Do you want to work for a company that is known for high quality standards and products? Spherion has the company and the job for you. This is a great opportunity to get in on the ground floor with a local company that is doing big things. We are hiring highly motivated and reliable talent that wish to excel and are driven to fabricate and assembly ornamental and structural components.Responsibilities:Assembles parts by bolting and rivetingOperate power and hand tools, such as, grinders, drills, and sawsSafely operate forklifts, overhead cranes and other material handling equipmentLocates and marks bending and cutting lines onto work-pieceSets up and operates fabricating machines such as brakes, saws, rollers, shears, flame cutters, and drill pressesFabricates and assembles sheet metal productsRemoves metal chips and shavings from surfaces of machines and wipes surfaces of machines to remove excess oil.Deburrs or polishes partsCleans around work areasChanges tools on powered equipmentWorking hours: 6:00 AM - 4:30 PMSkills:Work efficiently, accurately and safely.Read a shop drawing,Education:High SchoolExperience:1-4 yearsQualifications:Must be able to lift 50lbs regularlyMust be able to stand for complete shiftWalk the length of workstationBend to pick up items, lift and reach to work table heightMonday-Thursday: 6:00am to 4:30pmFriday: 6:00am to 12:00pm To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Do you pride yourself in your work? Do you want to work for a company that is known for high quality standards and products? Spherion has the company and the job for you. This is a great opportunity to get in on the ground floor with a local company that is doing big things. We are hiring highly motivated and reliable talent that wish to excel and are driven to fabricate and assembly ornamental and structural components.Responsibilities:Assembles parts by bolting and rivetingOperate power and hand tools, such as, grinders, drills, and sawsSafely operate forklifts, overhead cranes and other material handling equipmentLocates and marks bending and cutting lines onto work-pieceSets up and operates fabricating machines such as brakes, saws, rollers, shears, flame cutters, and drill pressesFabricates and assembles sheet metal productsRemoves metal chips and shavings from surfaces of machines and wipes surfaces of machines to remove excess oil.Deburrs or polishes partsCleans around work areasChanges tools on powered equipmentWorking hours: 6:00 AM - 4:30 PMSkills:Work efficiently, accurately and safely.Read a shop drawing,Education:High SchoolExperience:1-4 yearsQualifications:Must be able to lift 50lbs regularlyMust be able to stand for complete shiftWalk the length of workstationBend to pick up items, lift and reach to work table heightMonday-Thursday: 6:00am to 4:30pmFriday: 6:00am to 12:00pm To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Detroit Lakes, Minnesota
      • Temp to Perm
      • $16.00 - $18.00 per hour
      • Various Shifts Available
      Spherion Staffing is currently seeking to fill 1st and 2nd shift positions with a manufacturing client in Detroit Lakes.Responsibilities:- Able to remove parts from metal sheeting and remove slag and tabs, sort by flat, form and material thickness- Utilize jib crane to move heavier sheets of metal- Utilize hand tools such as grinders to remove burrs from metal- Assemble finished parts using print schematics- Inspect and QC product- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Ability to read and apply print reading to customer specificationsEducation:High SchoolExperience:0-1 yearsQualifications:- Ability to stand and work on repetitive tasks for long periods of timeSchedule:- 1st and 2nd shifts available - 1st shift Mon - Fri 6 am - 2:15 pm- 2nd shift Mon - Thurs 2:15 pm - 12:30 am To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is currently seeking to fill 1st and 2nd shift positions with a manufacturing client in Detroit Lakes.Responsibilities:- Able to remove parts from metal sheeting and remove slag and tabs, sort by flat, form and material thickness- Utilize jib crane to move heavier sheets of metal- Utilize hand tools such as grinders to remove burrs from metal- Assemble finished parts using print schematics- Inspect and QC product- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Ability to read and apply print reading to customer specificationsEducation:High SchoolExperience:0-1 yearsQualifications:- Ability to stand and work on repetitive tasks for long periods of timeSchedule:- 1st and 2nd shifts available - 1st shift Mon - Fri 6 am - 2:15 pm- 2nd shift Mon - Thurs 2:15 pm - 12:30 am To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Detroit Lakes, Minnesota
      • Temp to Perm
      • $20.00 - $30.00 per hour
      • Various Shifts Available
      Spherion Staffing is currently seeking a welder to work in a manufacturing environment. Employees will primarily be doing MIG welding but may occasionally do TIG. The ideal candidate will be able to read prints and weld parts per customer specification. Successful applicants should have prior welding experience.Responsibilities:-Steel or Stainless steel welding-Ability to complete torch / plasma cutting-Consistently lifting various weights and material-QC welds against customer specsWorking hours: Various Shifts AvailableSkills:-Print reading and application to welds-Must be a team playerEducation:High SchoolExperience:1-4 yearsQualifications:-Willingness to learn and take direction-Ability to work on repetitive tasks at times To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is currently seeking a welder to work in a manufacturing environment. Employees will primarily be doing MIG welding but may occasionally do TIG. The ideal candidate will be able to read prints and weld parts per customer specification. Successful applicants should have prior welding experience.Responsibilities:-Steel or Stainless steel welding-Ability to complete torch / plasma cutting-Consistently lifting various weights and material-QC welds against customer specsWorking hours: Various Shifts AvailableSkills:-Print reading and application to welds-Must be a team playerEducation:High SchoolExperience:1-4 yearsQualifications:-Willingness to learn and take direction-Ability to work on repetitive tasks at times To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 60 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.