You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    11 jobs found in Springville, Utah

    Filter1
    Clear all
      • Springville, Utah
      • Temp to Perm
      • $19.75 per hour
      • 11:00 PM - 7:30 AM
      Spherion is seeking an Equipment Prep and Sanitation Technician (EPSU) to join our team! You will clean, sanitize, and set up industrial production machinery and equipment. These jobs support a food manufacturing environment. Production lines are cleaned between shifts and during lunch. Pressure washer hoses are used. These are graveyard evening shifts - 5 eight hour shifts each week. Hours are 11pm to 7:30 am. Pay is $19.75 per hour. Experience with heavy lifting is required. If you have experience as a sanitation worker, production worker, warehouse associate, laborer, or construction worker this could be a good fit for you.Responsibilities:Clean, sanitize, and set up industrial machinery and pipeline distribution systemsClean pans used to supply production areasPerform routine cleaning of machinesRemove waste/ trash from production work areasAdhere to all safety policies and proceduresWorking hours: 11:00 PM - 7:30 AMSkills:Must be able to lift 50 lbs on a regular basisMust be able to communicate in EnglishEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to work in a wet environmentAbility to handle physical workload Please apply and then call or text "EPSU" to 385-448-2466 to schedule a phone interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is seeking an Equipment Prep and Sanitation Technician (EPSU) to join our team! You will clean, sanitize, and set up industrial production machinery and equipment. These jobs support a food manufacturing environment. Production lines are cleaned between shifts and during lunch. Pressure washer hoses are used. These are graveyard evening shifts - 5 eight hour shifts each week. Hours are 11pm to 7:30 am. Pay is $19.75 per hour. Experience with heavy lifting is required. If you have experience as a sanitation worker, production worker, warehouse associate, laborer, or construction worker this could be a good fit for you.Responsibilities:Clean, sanitize, and set up industrial machinery and pipeline distribution systemsClean pans used to supply production areasPerform routine cleaning of machinesRemove waste/ trash from production work areasAdhere to all safety policies and proceduresWorking hours: 11:00 PM - 7:30 AMSkills:Must be able to lift 50 lbs on a regular basisMust be able to communicate in EnglishEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to work in a wet environmentAbility to handle physical workload Please apply and then call or text "EPSU" to 385-448-2466 to schedule a phone interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Springville, Utah
      • Temp to Perm
      • $22.00 - $30.00 per hour
      • 7:00 AM - 3:30 AM
      Spherion is hiring CNC Machinists for a valve-manufacturing company in Springville. We are looking for motivated Machinists to work with the Machine Shop team. You will be setting up and operating CNC machines as well as manual machines such as vertical/horizontal machining centers, lathes, mills, and other gear cutting equipment. The weekly schedule is a 7am-3:30pm or 3:15pm-1:45am shift, Monday through Friday with overtime available for the near future. Pay starts between $22-$30/hr depending on experience with a great opportunity to go permanent after 3-4 months of high-quality performance.Responsibilities:--Use component drawings, routers, and verbal instructions to produce parts that meet specifications--Maintain quality control by measuring and inspecting finished parts--Maintain equipment by adjusting as needed and performing routine preventative inspections--Plan and lay-out work based on design drawings or sketches--Set-up machines to properly produce any type of componentWorking hours: 7:00 AM - 3:30 AMSkills:--Metal cutting knowledge to make good decisions in fabricating parts--High attention to detail--Comfortable working around machineryEducation:High SchoolExperience:1-4 yearsQualifications:--1-2 years of related experience or a machinist Certificate--High school degree required--Ability to lift up to 50 lbs This is the perfect chance to get on with at world-class company. Apply today and we'll schedule you for a phone interview right away!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring CNC Machinists for a valve-manufacturing company in Springville. We are looking for motivated Machinists to work with the Machine Shop team. You will be setting up and operating CNC machines as well as manual machines such as vertical/horizontal machining centers, lathes, mills, and other gear cutting equipment. The weekly schedule is a 7am-3:30pm or 3:15pm-1:45am shift, Monday through Friday with overtime available for the near future. Pay starts between $22-$30/hr depending on experience with a great opportunity to go permanent after 3-4 months of high-quality performance.Responsibilities:--Use component drawings, routers, and verbal instructions to produce parts that meet specifications--Maintain quality control by measuring and inspecting finished parts--Maintain equipment by adjusting as needed and performing routine preventative inspections--Plan and lay-out work based on design drawings or sketches--Set-up machines to properly produce any type of componentWorking hours: 7:00 AM - 3:30 AMSkills:--Metal cutting knowledge to make good decisions in fabricating parts--High attention to detail--Comfortable working around machineryEducation:High SchoolExperience:1-4 yearsQualifications:--1-2 years of related experience or a machinist Certificate--High school degree required--Ability to lift up to 50 lbs This is the perfect chance to get on with at world-class company. Apply today and we'll schedule you for a phone interview right away!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Springville, Utah
      • Permanent
      • $20.73 per hour
      • Various Shifts Available
      NOW HIRING! This is a direct hire opportunity that requires at least 2 years of continuous employment at a similar company. Apply or text "GP" to 385-448-2466 to schedule a phone interview today!Starting pay is $20.73/hour with multiple opportunities for pay increases! $2000 SIGN ON BONUS!Spherion is seeking a General Production Worker to join our team! You will be working in several areas of the warehouse throughout your shift. Primary job responsibilities include handling and distributing heavy materials, working with heavy machinery, and other labor intensive tasks. These jobs support a food manufacturing environment. Experience with heavy lifting is required. If you have experience as a material handler, shipping and receiving clerk, production worker, warehouse associate, warehouse loader or unloader, warehouse stocker, laborer, or construction worker this could be a good fit for you!This position is a very early morning shifts with 4 ten hour days! Voluntary overtime available as well!Responsibilities:-- Standing on feet for 10 hour shifts-- Lifting 50 pounds on a consistent basis-- Delivering and/or supplying the prepped food to various areas of the warehouse-- Cleaning and sanitizing work areas.-- Using fast-paced, repetitive motions consistently during your 10-hour shift-- Following all health and safety guidelinesWorking hours: Various Shifts AvailableSkills:-- Ability to work in a fast-paced environment-- Ability to lift, push, and pull large quantities of product (a lot of heavy lifting)Education:No Degree RequiredExperience:1-4 yearsQualifications:-- Must be at least 18 years old-- Must be able to pass background check-- Must be able to pass employment verification This company offers AMAZING BENEFITS including medical and dental insurance, a 401K retirement plan, tuition reimbursement, paid parental leave, paid time off, annual raises, referral bonuses and more!This warehouse position offers STABILITY with NUMEROUS career advancement opportunities with a reputable company. If you have previous experience as a laborer, warehouse worker, production worker, construction worker, or laborer please apply!This is a direct hire opportunity that requires at least 2 years of continuous employment at a similar company. Apply or text "GP" to 385-448-2466 to schedule a phone interview today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      NOW HIRING! This is a direct hire opportunity that requires at least 2 years of continuous employment at a similar company. Apply or text "GP" to 385-448-2466 to schedule a phone interview today!Starting pay is $20.73/hour with multiple opportunities for pay increases! $2000 SIGN ON BONUS!Spherion is seeking a General Production Worker to join our team! You will be working in several areas of the warehouse throughout your shift. Primary job responsibilities include handling and distributing heavy materials, working with heavy machinery, and other labor intensive tasks. These jobs support a food manufacturing environment. Experience with heavy lifting is required. If you have experience as a material handler, shipping and receiving clerk, production worker, warehouse associate, warehouse loader or unloader, warehouse stocker, laborer, or construction worker this could be a good fit for you!This position is a very early morning shifts with 4 ten hour days! Voluntary overtime available as well!Responsibilities:-- Standing on feet for 10 hour shifts-- Lifting 50 pounds on a consistent basis-- Delivering and/or supplying the prepped food to various areas of the warehouse-- Cleaning and sanitizing work areas.-- Using fast-paced, repetitive motions consistently during your 10-hour shift-- Following all health and safety guidelinesWorking hours: Various Shifts AvailableSkills:-- Ability to work in a fast-paced environment-- Ability to lift, push, and pull large quantities of product (a lot of heavy lifting)Education:No Degree RequiredExperience:1-4 yearsQualifications:-- Must be at least 18 years old-- Must be able to pass background check-- Must be able to pass employment verification This company offers AMAZING BENEFITS including medical and dental insurance, a 401K retirement plan, tuition reimbursement, paid parental leave, paid time off, annual raises, referral bonuses and more!This warehouse position offers STABILITY with NUMEROUS career advancement opportunities with a reputable company. If you have previous experience as a laborer, warehouse worker, production worker, construction worker, or laborer please apply!This is a direct hire opportunity that requires at least 2 years of continuous employment at a similar company. Apply or text "GP" to 385-448-2466 to schedule a phone interview today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Springville, Utah
      • Temp to Perm
      • $16.00 per hour
      • 7:00 AM - 3:30 PM
      Spherion is hiring for a Shipping Clerk at an amazing, valve-manufacturing company in Springville. This position involves all aspects of material handling, including pulling parts for work orders, moving production materials, and doing cycle counts. Shift hours are 7am-3:30pm, Monday through Friday, with potential need for overtime until 5pm at the end of the month. This is a long-term position with a fantastic company!Responsibilities:--Accurately pull parts for valve layouts, work orders, spare parts orders, and parts request forms--Help with daily inventory cycle counts--Place parts from receiving into the stock shelves for shop work orders--Support other departments with inventory needs and concernsWorking hours: 7:00 AM - 3:30 PMSkills:--Able to do basic counting & math--High attention to detail to avoid mistake on shipping orders--Able to work comfortably in a fast-paced environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:--6 months of warehouse/shipping experience preferred--Able to lift up to 50lbs throughout the shift This is an incredible opportunity to grow your warehouse and shipping experience. We are hiring right away for these positions, so apply today and we'll schedule you for a phone interview immediately!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring for a Shipping Clerk at an amazing, valve-manufacturing company in Springville. This position involves all aspects of material handling, including pulling parts for work orders, moving production materials, and doing cycle counts. Shift hours are 7am-3:30pm, Monday through Friday, with potential need for overtime until 5pm at the end of the month. This is a long-term position with a fantastic company!Responsibilities:--Accurately pull parts for valve layouts, work orders, spare parts orders, and parts request forms--Help with daily inventory cycle counts--Place parts from receiving into the stock shelves for shop work orders--Support other departments with inventory needs and concernsWorking hours: 7:00 AM - 3:30 PMSkills:--Able to do basic counting & math--High attention to detail to avoid mistake on shipping orders--Able to work comfortably in a fast-paced environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:--6 months of warehouse/shipping experience preferred--Able to lift up to 50lbs throughout the shift This is an incredible opportunity to grow your warehouse and shipping experience. We are hiring right away for these positions, so apply today and we'll schedule you for a phone interview immediately!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Springville, Utah
      • Temp to Perm
      • $19.25 per hour
      • Various Shifts Available
      NOW HIRING! CONTRATANDO AHORA EN ESPANOL!!!Starting pay is $19.25/hour with multiple opportunities for pay increases!This position is a very early morning shift with 4 ten hour shifts! Voluntary overtime available as well!Spherion is seeking a General Production Worker to join our team! You will be working in all areas of the warehouse throughout your shift. Primary job responsibilities include handling heavy products, distributing raw materials, working with heavy machinery, and other physically demanding tasks. These jobs support a food manufacturing environment. Experience with heavy lifting is required. If you have experience as a material handler, shipping and receiving clerk, production worker, warehouse associate, warehouse loader or unloader, warehouse stocker, laborer, or construction worker this could be a good fit for you!Responsibilities:-- Standing on feet for 10 hour shifts-- Lifting 50 pounds on a consistent basis-- Delivering and/or supplying the prepped food to various areas of the warehouse-- Cleaning and sanitizing work areas.-- Using fast-paced, repetitive motions consistently during your 10-hour shift-- Following all health and safety guidelinesWorking hours: Various Shifts AvailableSkills:-- Ability to work in a fast-paced environment-- Ability to lift, push, and pull large quantities of product (a lot of heavy lifting)Education:No Degree RequiredExperience:0-1 yearsQualifications:-- Must be at least 18 years old-- Must be able to pass background check-- Must be able to pass employment verification Amazing benefits after getting hired on including medical and dental insurance, a 401K retirement plan, tuition reimbursement, paid parental leave, paid time off, annual raises, referral bonuses and more!This warehouse position offers STABILITY with NUMEROUS career advancement opportunities with a reputable company who offers phenomenal benefits with lots of voluntary overtime available. If you have previous experience as a laborer, warehouse worker, production worker, construction worker, or laborer please apply!Available for English and Spanish speakers!Call/text today to schedule a phone interview! Our phone number is: (385) 448-2466.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      NOW HIRING! CONTRATANDO AHORA EN ESPANOL!!!Starting pay is $19.25/hour with multiple opportunities for pay increases!This position is a very early morning shift with 4 ten hour shifts! Voluntary overtime available as well!Spherion is seeking a General Production Worker to join our team! You will be working in all areas of the warehouse throughout your shift. Primary job responsibilities include handling heavy products, distributing raw materials, working with heavy machinery, and other physically demanding tasks. These jobs support a food manufacturing environment. Experience with heavy lifting is required. If you have experience as a material handler, shipping and receiving clerk, production worker, warehouse associate, warehouse loader or unloader, warehouse stocker, laborer, or construction worker this could be a good fit for you!Responsibilities:-- Standing on feet for 10 hour shifts-- Lifting 50 pounds on a consistent basis-- Delivering and/or supplying the prepped food to various areas of the warehouse-- Cleaning and sanitizing work areas.-- Using fast-paced, repetitive motions consistently during your 10-hour shift-- Following all health and safety guidelinesWorking hours: Various Shifts AvailableSkills:-- Ability to work in a fast-paced environment-- Ability to lift, push, and pull large quantities of product (a lot of heavy lifting)Education:No Degree RequiredExperience:0-1 yearsQualifications:-- Must be at least 18 years old-- Must be able to pass background check-- Must be able to pass employment verification Amazing benefits after getting hired on including medical and dental insurance, a 401K retirement plan, tuition reimbursement, paid parental leave, paid time off, annual raises, referral bonuses and more!This warehouse position offers STABILITY with NUMEROUS career advancement opportunities with a reputable company who offers phenomenal benefits with lots of voluntary overtime available. If you have previous experience as a laborer, warehouse worker, production worker, construction worker, or laborer please apply!Available for English and Spanish speakers!Call/text today to schedule a phone interview! Our phone number is: (385) 448-2466.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Provo, Utah
      • Temp to Perm
      • $16.00 - $17.00 per hour
      • 6:00 AM - 2:30 PM
      Spherion is hiring for a metal target manufacturing company in Provo. We are looking for general laborers to assist the manufacturing process in the Paint department. Day shift schedule: 6am-2:30pm, Mon-Fri, $16/hr; Swing shift schedule: 1:30pm-11pm, Mon-Fri, $17/hr. This a great opportunity to start a long-term job with a reputable company in Provo.Responsibilities:--Load metal material into the paint machine--Unload finished material and deliver to the Quality team for inspection--Inspect finished product to ensure proper painting procedure--Other duties as assignedWorking hours: 6:00 AM - 2:30 PMSkills:--Able to lift up to 50 lbs throughout the shift--Comfortable with a warehouse or manufacturing environment--Team player--Solid communication skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:--6 months of warehouse or manufacturing experience preferred--Painting experience is plus! We are hiring immediately for these positions, so don't delay on submitting your application. We'll get you scheduled for a phone interview right away!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring for a metal target manufacturing company in Provo. We are looking for general laborers to assist the manufacturing process in the Paint department. Day shift schedule: 6am-2:30pm, Mon-Fri, $16/hr; Swing shift schedule: 1:30pm-11pm, Mon-Fri, $17/hr. This a great opportunity to start a long-term job with a reputable company in Provo.Responsibilities:--Load metal material into the paint machine--Unload finished material and deliver to the Quality team for inspection--Inspect finished product to ensure proper painting procedure--Other duties as assignedWorking hours: 6:00 AM - 2:30 PMSkills:--Able to lift up to 50 lbs throughout the shift--Comfortable with a warehouse or manufacturing environment--Team player--Solid communication skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:--6 months of warehouse or manufacturing experience preferred--Painting experience is plus! We are hiring immediately for these positions, so don't delay on submitting your application. We'll get you scheduled for a phone interview right away!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Orem, Utah
      • Contract
      We are seeking an experienced Senior Electrical Engineer to work as a part of a team engaged in the design of tactical unmanned air systems. Primarily, the use of circuit design tools to create schematics, design printed board assemblies (PCAs), build and test electrical assemblies, and transition designs from engineering development into manufacturing. The EE will work closely with mechanical engineers to design UAS subsystems such as antennas and wiring harnesses, and with software engineers to support functional and processing requirements. The EE will contribute to quality and reliability in our products by participating in peer reviews and by thoroughly documenting all work. The EE will support our production team in troubleshooting electrical issues related to the product design. Other responsibilities include building and evaluating prototypes and working with technicians and vendors to build designs.The successful candidate will demonstrate complete understanding of circuit design and analysis, familiarity with circuit testing equipment, and experience with variety of circuit fabrication techniques, including circuit test and measurement equipment, experience with a variety of circuit fabrication techniquesThis is a full time, Contract role based onsite in the greater Salt Lake City, Utah area and offers flexible work hours: 4x10 hour days (Mon-Thu), 3 days off per week with flexible start times (must be present from 9a-3p; come in earlier or stay later to work 10 hours per day).  Due to industry requirements, applicants must be a U.S. Citizen or a Permanent Resident.Requirements:Bachelor’s degree from an accredited college in a related discipline with 5 years professional experience; or 3 years of professional experience with a related Master’s degree. Electrical Engineering degree(s) preferred.Complete understanding of both analog and digital circuit design principlesCircuit design and board layout experienceExtensive laboratory experience using common engineering tools including logic analyzers, oscilloscopes, power supplies, function generators, digital multi-meters, and other support equipmentStrong written, communication, and presentation skillsOther duties as assignedDesired skills:Experience using Altium for circuit design and board layoutExperience programming with C/C++, Python, and/or QtFamiliarity with Arduino and/or Raspberry PiExperience with small drone/UAS or RC aircraftExperience with configuration management tool(s) such as Enterprise Product Data Management (EPDM)Experience with development and execution of test plansDesire to assume ownership of tasks and drive to closure quickly and efficientlyCall to Action:Come join a multi-disciplinary engineering team with mechanical, electrical, software and systems expertise. As an EE, you will play an integral part in expanding our portfolio of platforms and programs, to include developing new products while supporting current products.  Comprehensive benefits package includes a very competitive starting salary and flexible work hours: typically4x10 hour days (Mon-Thu), 3 days off per week with flexible start times.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected status.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are seeking an experienced Senior Electrical Engineer to work as a part of a team engaged in the design of tactical unmanned air systems. Primarily, the use of circuit design tools to create schematics, design printed board assemblies (PCAs), build and test electrical assemblies, and transition designs from engineering development into manufacturing. The EE will work closely with mechanical engineers to design UAS subsystems such as antennas and wiring harnesses, and with software engineers to support functional and processing requirements. The EE will contribute to quality and reliability in our products by participating in peer reviews and by thoroughly documenting all work. The EE will support our production team in troubleshooting electrical issues related to the product design. Other responsibilities include building and evaluating prototypes and working with technicians and vendors to build designs.The successful candidate will demonstrate complete understanding of circuit design and analysis, familiarity with circuit testing equipment, and experience with variety of circuit fabrication techniques, including circuit test and measurement equipment, experience with a variety of circuit fabrication techniquesThis is a full time, Contract role based onsite in the greater Salt Lake City, Utah area and offers flexible work hours: 4x10 hour days (Mon-Thu), 3 days off per week with flexible start times (must be present from 9a-3p; come in earlier or stay later to work 10 hours per day).  Due to industry requirements, applicants must be a U.S. Citizen or a Permanent Resident.Requirements:Bachelor’s degree from an accredited college in a related discipline with 5 years professional experience; or 3 years of professional experience with a related Master’s degree. Electrical Engineering degree(s) preferred.Complete understanding of both analog and digital circuit design principlesCircuit design and board layout experienceExtensive laboratory experience using common engineering tools including logic analyzers, oscilloscopes, power supplies, function generators, digital multi-meters, and other support equipmentStrong written, communication, and presentation skillsOther duties as assignedDesired skills:Experience using Altium for circuit design and board layoutExperience programming with C/C++, Python, and/or QtFamiliarity with Arduino and/or Raspberry PiExperience with small drone/UAS or RC aircraftExperience with configuration management tool(s) such as Enterprise Product Data Management (EPDM)Experience with development and execution of test plansDesire to assume ownership of tasks and drive to closure quickly and efficientlyCall to Action:Come join a multi-disciplinary engineering team with mechanical, electrical, software and systems expertise. As an EE, you will play an integral part in expanding our portfolio of platforms and programs, to include developing new products while supporting current products.  Comprehensive benefits package includes a very competitive starting salary and flexible work hours: typically4x10 hour days (Mon-Thu), 3 days off per week with flexible start times.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected status.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Orem, Utah
      • Contract
      We are seeking an Embedded Software Engineer I to work on exciting products for our military customers.  As a part of a growing engineering team engaged in the design of tactical unmanned air systems. The primary responsibility includes the development and testing of real-time embedded software using languages such as C, C++, Python, Bash Script, HTML, and JAVA.  This role will also develop software for various targets and be responsible for functional tests, peer reviews, working with electrical and mechanical engineers during integration and test, and support internal and external customers while troubleshooting software issues.This is a full time, long term Contract role with the potential of permanent hire.  Site based position, located in the greater Salt Lake City, Utah area and offers a flexible work schedule: 4x10 hour days (Mon-Thu), with flexible start times (must be present from 9a-3p; come in earlier or stay later to work 10 hours per day).  Due to industry requirements, applicants must be a U.S. Citizen or a Permanent Resident.Requirements: Experience programming with C, C++, Python, and JAVAExperience with multi-threaded programming.Experience with software lifecycle tools (i.e. JIRA, Confluence, Bitbucket, Git, Jenkins etc.)Experience developing controls algorithms for UAS applications or similarDegree from accredited college in Software Engineering or Computer ScienceDesired Skills:Experience with software lifecycle tools (i.e. JIRA, Confluence, Bitbucket, Git, etc.)Experience developing within the following IDE frameworks: QT, Android studio, EclipseExperience with small drone/UAS or RC aircraftExperience developing controls algorithms for UAS applications or similarCall to Action:Come join a multi-disciplinary engineering team with mechanical, electrical, software and systems expertise. As a Senior Embedded Software Engineer, you will play an integral part in expanding our portfolio of platforms and programs, to include developing new products while supporting current products.  Comprehensive benefits package includes a very competitive starting salary and flexible work hours: typically4x10 hour days (Mon-Thu), 3 days off per week with flexible start times.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are seeking an Embedded Software Engineer I to work on exciting products for our military customers.  As a part of a growing engineering team engaged in the design of tactical unmanned air systems. The primary responsibility includes the development and testing of real-time embedded software using languages such as C, C++, Python, Bash Script, HTML, and JAVA.  This role will also develop software for various targets and be responsible for functional tests, peer reviews, working with electrical and mechanical engineers during integration and test, and support internal and external customers while troubleshooting software issues.This is a full time, long term Contract role with the potential of permanent hire.  Site based position, located in the greater Salt Lake City, Utah area and offers a flexible work schedule: 4x10 hour days (Mon-Thu), with flexible start times (must be present from 9a-3p; come in earlier or stay later to work 10 hours per day).  Due to industry requirements, applicants must be a U.S. Citizen or a Permanent Resident.Requirements: Experience programming with C, C++, Python, and JAVAExperience with multi-threaded programming.Experience with software lifecycle tools (i.e. JIRA, Confluence, Bitbucket, Git, Jenkins etc.)Experience developing controls algorithms for UAS applications or similarDegree from accredited college in Software Engineering or Computer ScienceDesired Skills:Experience with software lifecycle tools (i.e. JIRA, Confluence, Bitbucket, Git, etc.)Experience developing within the following IDE frameworks: QT, Android studio, EclipseExperience with small drone/UAS or RC aircraftExperience developing controls algorithms for UAS applications or similarCall to Action:Come join a multi-disciplinary engineering team with mechanical, electrical, software and systems expertise. As a Senior Embedded Software Engineer, you will play an integral part in expanding our portfolio of platforms and programs, to include developing new products while supporting current products.  Comprehensive benefits package includes a very competitive starting salary and flexible work hours: typically4x10 hour days (Mon-Thu), 3 days off per week with flexible start times.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Orem, Utah
      • Contract
      We are seeking an entry level Software Engineer to join to Operations Engineering group and aid in the development and programming of test fixtures used to produce world class UAV systems.This is a full time, Contract role based onsite in the greater Salt Lake City, Utah area and offers flexible work hours: 4x10 hour days (Mon-Thu), 3 days off per week with flexible start times (must be present from 9a-3p; come in earlier or stay later to work 10 hours per day).  Due to industry requirements, applicants must be a U.S. Citizen or a Permanent Resident.Technical Requirements:Languages and libraries:Python and the PyQt5 libraryC++ and QT FrameworkC (STM32 microcontrollers) OptionalHardware:Experience with the Raspberry Pi and their GPIOsExperience with ArduinosKnowledge of the following protocols or signals:I2C, UART, CAN & PWMSoftware developer tools:GIT, Visual Studio Code, Qt Creator, STM32 Cube IDExtras:Knowledge of Ardupilot, Mavlink, Uavcan and drones in generalCall to Action:Come join a multi-disciplinary engineering team with mechanical, electrical, software and systems expertise. As an entry level Software Engineer, you will play an integral part in expanding our portfolio of platforms and programs, to include developing new products while supporting current products.  Flexible work hours: typically4x10 hour days (Mon-Thu), 3 days off per week with flexible start times.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected status.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are seeking an entry level Software Engineer to join to Operations Engineering group and aid in the development and programming of test fixtures used to produce world class UAV systems.This is a full time, Contract role based onsite in the greater Salt Lake City, Utah area and offers flexible work hours: 4x10 hour days (Mon-Thu), 3 days off per week with flexible start times (must be present from 9a-3p; come in earlier or stay later to work 10 hours per day).  Due to industry requirements, applicants must be a U.S. Citizen or a Permanent Resident.Technical Requirements:Languages and libraries:Python and the PyQt5 libraryC++ and QT FrameworkC (STM32 microcontrollers) OptionalHardware:Experience with the Raspberry Pi and their GPIOsExperience with ArduinosKnowledge of the following protocols or signals:I2C, UART, CAN & PWMSoftware developer tools:GIT, Visual Studio Code, Qt Creator, STM32 Cube IDExtras:Knowledge of Ardupilot, Mavlink, Uavcan and drones in generalCall to Action:Come join a multi-disciplinary engineering team with mechanical, electrical, software and systems expertise. As an entry level Software Engineer, you will play an integral part in expanding our portfolio of platforms and programs, to include developing new products while supporting current products.  Flexible work hours: typically4x10 hour days (Mon-Thu), 3 days off per week with flexible start times.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected status.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Orem, Utah
      • Temp to Perm
      • $18.00 per hour
      • 8:00 AM - 6:00 PM
      We are looking for an experienced electronics assembler.4 day work week. Shift is Mon-Thurs 8 am-6 pm.Responsibilities:Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment. Build products such as electric motors, computers, electronic control devices, and sensing equipment.Working hours: 8:00 AM - 6:00 PMSkills:solderingEducation:No Degree RequiredExperience:0-1 yearsQualifications:We are looking for someone with previous electronics assembly experience. We can train on our specific product. Please apply online and then call or text 801-221-0550 to schedule an interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for an experienced electronics assembler.4 day work week. Shift is Mon-Thurs 8 am-6 pm.Responsibilities:Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment. Build products such as electric motors, computers, electronic control devices, and sensing equipment.Working hours: 8:00 AM - 6:00 PMSkills:solderingEducation:No Degree RequiredExperience:0-1 yearsQualifications:We are looking for someone with previous electronics assembly experience. We can train on our specific product. Please apply online and then call or text 801-221-0550 to schedule an interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Orem, Utah
      • Temp to Perm
      • $40,000 - $50,000 per year
      • 6:00 AM - 4:30 PM
      We are looking for a mechanical drafters to join a world-class engineering team. These jobs can be either contract or contract-to-hire based on performance and company need.Work schedule is Mon-Thurs so you get a 3 day weekend every week!Responsibilities:Job duties include creating mechanical design documentation using CAD tools. Candidate musthave experience manipulating existing CAD models in consultation with the engineering team.The drafter will plan, lay out, draw, and revise part, assembly, and installation engineeringdrawings. The drafter will collaborate as part of an integrated multi-disciplinary team,contributing design ideas to improve quality, function, and manufacturability. The drafter willalso be expected to participate in prototyping, building, and testing of mechanical designs.Working hours: 6:00 AM - 4:30 PMSkills:Related technical college coursework completed equivalent to an associate degreeEnrolled in a related technical degree-seeking college programExperience building small VTOL Unmanned Aircraft Systems (SUAS) or RC aircraftExperience creating mechanical drawings and assembly documentation for a productionenvironmentAbility and desire to assume ownership of tasks and drive to closure quickly and efficientlyMicrosoft Office (Excel, WORD, PowerPoint, Project) experienceEducation:No Degree RequiredExperience:1-4 yearsQualifications:Drafting experience (1 year) including use of engineering drawing templates and creatingdrawings for products and molds.Experience modeling and generating drawings using Solidworks, Creo or other similarsoftwareExcellent written and verbal communication skillsExperience working in a fast-paced small business environment using agile engineeringmethodologiesSolutions-focused and energetic attitude with a desire to deliver quality and excellence Please apply now to be considered.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for a mechanical drafters to join a world-class engineering team. These jobs can be either contract or contract-to-hire based on performance and company need.Work schedule is Mon-Thurs so you get a 3 day weekend every week!Responsibilities:Job duties include creating mechanical design documentation using CAD tools. Candidate musthave experience manipulating existing CAD models in consultation with the engineering team.The drafter will plan, lay out, draw, and revise part, assembly, and installation engineeringdrawings. The drafter will collaborate as part of an integrated multi-disciplinary team,contributing design ideas to improve quality, function, and manufacturability. The drafter willalso be expected to participate in prototyping, building, and testing of mechanical designs.Working hours: 6:00 AM - 4:30 PMSkills:Related technical college coursework completed equivalent to an associate degreeEnrolled in a related technical degree-seeking college programExperience building small VTOL Unmanned Aircraft Systems (SUAS) or RC aircraftExperience creating mechanical drawings and assembly documentation for a productionenvironmentAbility and desire to assume ownership of tasks and drive to closure quickly and efficientlyMicrosoft Office (Excel, WORD, PowerPoint, Project) experienceEducation:No Degree RequiredExperience:1-4 yearsQualifications:Drafting experience (1 year) including use of engineering drawing templates and creatingdrawings for products and molds.Experience modeling and generating drawings using Solidworks, Creo or other similarsoftwareExcellent written and verbal communication skillsExperience working in a fast-paced small business environment using agile engineeringmethodologiesSolutions-focused and energetic attitude with a desire to deliver quality and excellence Please apply now to be considered.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.