You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    34 jobs found for Maintenance in Florida

    Filter2
    Clear all
      • Naples, Florida
      • Permanent
      • $20.00 - $23.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion has partnered with a local Behavioral Health Center in the Naples area seeking to directly hire Facilities Maintenance personnel to keep safe and beautifully maintain their Main Campus plus additional locations in Collier County.Responsibilities:- Construction, maintenance, preventative maintenance and repairs for various structures and campus facilities.- Painting, masonry, closed circuit TV inspection, carpentry, electrical, plumbing, HVAC, drywall, grounds work and attic work.- Basic trouble-shooting, installation and in-field repair for a variety of equipment and components.- Driving pick-up trucks and vans for transportation of tools or materials.- Recognizing and reporting deterioration, repair needs, and maintenance issues.- Operating hand-held manual, electrical, and gas-powered tools (shovels, mixers, sprayers, drills, hammers, pressure washers, etc.) plus small equipment (jack hammers, concrete saws, chain saws, skill saw, etc.).- Recording work orders, materials utilization, supplies inventory, cost estimates, labor hours, maintenance logs and fuel logs.- Ensuring the cleanliness and performance level of all tools, equipment and vehicles to maintain operational efficiency and comply with department policy.Working hours: 8:00 AM - 5:00 PMSkills:- 1 years of experience in trade or maintenance = Required- General knowledge of all trades related to maintenance = Required- Ability to climb, balance, stoop, kneel, crouch and crawl = Required- Demonstrated safety when lifting, carrying, pushing or pulling 20-100 lbs. = Required- Adherence to OHSA, JHACO, AHCA and DLC standards for residential maintenance = Required- Commitment to Internal Customer Service = Required- Staying compliant on all trainings and immunizations = Required- Ability to pass a Level II DCF Mental Health Fingerprinting, Drug Screen and Local Criminal Check = RequiredEducation:High SchoolExperience:1-4 yearsQualifications:- High School Diploma or GED = Preferred (Vocational/Certificates can be substituted)- Valid FL Driver's License with clean record = Required *Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has partnered with a local Behavioral Health Center in the Naples area seeking to directly hire Facilities Maintenance personnel to keep safe and beautifully maintain their Main Campus plus additional locations in Collier County.Responsibilities:- Construction, maintenance, preventative maintenance and repairs for various structures and campus facilities.- Painting, masonry, closed circuit TV inspection, carpentry, electrical, plumbing, HVAC, drywall, grounds work and attic work.- Basic trouble-shooting, installation and in-field repair for a variety of equipment and components.- Driving pick-up trucks and vans for transportation of tools or materials.- Recognizing and reporting deterioration, repair needs, and maintenance issues.- Operating hand-held manual, electrical, and gas-powered tools (shovels, mixers, sprayers, drills, hammers, pressure washers, etc.) plus small equipment (jack hammers, concrete saws, chain saws, skill saw, etc.).- Recording work orders, materials utilization, supplies inventory, cost estimates, labor hours, maintenance logs and fuel logs.- Ensuring the cleanliness and performance level of all tools, equipment and vehicles to maintain operational efficiency and comply with department policy.Working hours: 8:00 AM - 5:00 PMSkills:- 1 years of experience in trade or maintenance = Required- General knowledge of all trades related to maintenance = Required- Ability to climb, balance, stoop, kneel, crouch and crawl = Required- Demonstrated safety when lifting, carrying, pushing or pulling 20-100 lbs. = Required- Adherence to OHSA, JHACO, AHCA and DLC standards for residential maintenance = Required- Commitment to Internal Customer Service = Required- Staying compliant on all trainings and immunizations = Required- Ability to pass a Level II DCF Mental Health Fingerprinting, Drug Screen and Local Criminal Check = RequiredEducation:High SchoolExperience:1-4 yearsQualifications:- High School Diploma or GED = Preferred (Vocational/Certificates can be substituted)- Valid FL Driver's License with clean record = Required *Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Rockledge, Florida
      • Temp to Perm
      • $17.00 - $25.00 per hour
      • 8:00 AM - 5:00 PM
      Industrial Manufacturing Maintenance Technician: $17-$25/hr If find helper then $15-$22/hrRole will depend on experience and KnowledgeIndustrial Manufacturing Maintenance Technician: Will be under the supervision of the Maintenance Manager, will perform general maintenance and repairs of large production machinery, in addition to facility maintenance including plumbing, electrical, basic carpentry, heating and cooling, and other building systems.Maintenance Technician/Helper: Will assists the Maintenance Manager and the Industrial Mfg. Maintenance Technician with installation and repairs of machinery, equipment, physical structures, and pipe and electrical systems, in addition to facility maintenance.Responsibilities:Duties/Responsibilities for the Industrial Maintenance Tech??? Performs preventive maintenance inspections and service on manufacturing equipment.??? Performs preventive maintenance and repair on fork trucks, pallet jacks, stand on jacks, tractors, trailers, box trucks and other Company veihicles??? Troubleshoots issues to determine necessary repairs.??? Thoroughly cleans machines and machine parts, removing parts and reinstalling as necessary.??? Oils and lubricates moving parts on machines to ensure effective performance.??? Records and reports damaged, worn, or broken parts.??? Orders and installs replacement parts for machines.??? Identifies the causes of unexpected breakdowns of machines.??? Repairs broken machines quickly and efficiently.??? Prepares reports documenting work performed.??? Cleans, organizes, inventories, stocks, and otherwise maintains shop areas, parts, tools, and supplies. ??? Performs general repairs that do not require a specialized technician. Example may include repairing drywall, painting, and repairing doors, plumbing fixtures and other building fixtures.??? Performs routine maintenance on building systems.??? Cleans and assists with upkeep of the facilities??? Performs other related duties as assigned. IF AT A HELPER LEVEL THEN:??? Assists with preventive maintenance inspections and service on machines.??? Thoroughly cleans machines and machine parts.??? Oils and lubricates moving parts on machines to ensure effective performance.??? Assists with repairs of broken machines.??? Assists with the cleaning, organizing, stocking, and other duties as assigned to maintain shop areas, parts, tools, and supplies. ??? Performs general repairs that do not require a specialized technician. Example may include repairing drywall, painting, and repairing doors, plumbing fixtures and other building fixtures.??? Performs routine maintenance on building systems.??? Cleans and assists with upkeep of the facilities??? Performs other related duties as assigned.Working hours: 8:00 AM - 5:00 PMSkills:For the Industrial Maintenance Tech:Required Skills/Abilities: --Ability to follow instructions from supervisors.--Mechanically inclined with great problem-solving skills.--Knowledge of general carpentry and repair.--Trained or certified in welding, pipe fitting, electrical, plumbing.--Works well independently and with others.--Good communication skills.--Organized with attention to detail.--Ability to work in a fast-paced and stressful environment.IF AT A HELPER LEVEL THEN all the skills above are not required.Education:High SchoolExperience:4-7 yearsQualifications:--Must have a minimum of 2-4 years' related experience in a manufacturing facility.--Vocational or community college with related coursework or equivalent experience, a plus.ADDITIONAL INFO:Physical Requirements: ??? Prolonged periods standing and walking.??? Able to bend, stretch, push, pull, and move as needed
      Industrial Manufacturing Maintenance Technician: $17-$25/hr If find helper then $15-$22/hrRole will depend on experience and KnowledgeIndustrial Manufacturing Maintenance Technician: Will be under the supervision of the Maintenance Manager, will perform general maintenance and repairs of large production machinery, in addition to facility maintenance including plumbing, electrical, basic carpentry, heating and cooling, and other building systems.Maintenance Technician/Helper: Will assists the Maintenance Manager and the Industrial Mfg. Maintenance Technician with installation and repairs of machinery, equipment, physical structures, and pipe and electrical systems, in addition to facility maintenance.Responsibilities:Duties/Responsibilities for the Industrial Maintenance Tech??? Performs preventive maintenance inspections and service on manufacturing equipment.??? Performs preventive maintenance and repair on fork trucks, pallet jacks, stand on jacks, tractors, trailers, box trucks and other Company veihicles??? Troubleshoots issues to determine necessary repairs.??? Thoroughly cleans machines and machine parts, removing parts and reinstalling as necessary.??? Oils and lubricates moving parts on machines to ensure effective performance.??? Records and reports damaged, worn, or broken parts.??? Orders and installs replacement parts for machines.??? Identifies the causes of unexpected breakdowns of machines.??? Repairs broken machines quickly and efficiently.??? Prepares reports documenting work performed.??? Cleans, organizes, inventories, stocks, and otherwise maintains shop areas, parts, tools, and supplies. ??? Performs general repairs that do not require a specialized technician. Example may include repairing drywall, painting, and repairing doors, plumbing fixtures and other building fixtures.??? Performs routine maintenance on building systems.??? Cleans and assists with upkeep of the facilities??? Performs other related duties as assigned. IF AT A HELPER LEVEL THEN:??? Assists with preventive maintenance inspections and service on machines.??? Thoroughly cleans machines and machine parts.??? Oils and lubricates moving parts on machines to ensure effective performance.??? Assists with repairs of broken machines.??? Assists with the cleaning, organizing, stocking, and other duties as assigned to maintain shop areas, parts, tools, and supplies. ??? Performs general repairs that do not require a specialized technician. Example may include repairing drywall, painting, and repairing doors, plumbing fixtures and other building fixtures.??? Performs routine maintenance on building systems.??? Cleans and assists with upkeep of the facilities??? Performs other related duties as assigned.Working hours: 8:00 AM - 5:00 PMSkills:For the Industrial Maintenance Tech:Required Skills/Abilities: --Ability to follow instructions from supervisors.--Mechanically inclined with great problem-solving skills.--Knowledge of general carpentry and repair.--Trained or certified in welding, pipe fitting, electrical, plumbing.--Works well independently and with others.--Good communication skills.--Organized with attention to detail.--Ability to work in a fast-paced and stressful environment.IF AT A HELPER LEVEL THEN all the skills above are not required.Education:High SchoolExperience:4-7 yearsQualifications:--Must have a minimum of 2-4 years' related experience in a manufacturing facility.--Vocational or community college with related coursework or equivalent experience, a plus.ADDITIONAL INFO:Physical Requirements: ??? Prolonged periods standing and walking.??? Able to bend, stretch, push, pull, and move as needed
      • Leesburg, Florida
      • Permanent
      • $24.00 per hour
      • 11:00 PM - 7:00 AM
      Spherion Staffing has partnered with a fast growing pre-fab concrete company located in Leesburg to directly hire a Maintenance Tech II.The schedule is Sunday to Thursday from11:00 pm to 7:00 am, with a minimum starting pay rate is $25/hr.As part of a High Performance Work Team, you will assist with the ongoing development of maintenance programs such as RWP (Reliability Workflow Process), PMO (preventive Maintenance Optimization) and PdM (Predictive Maintenance). Organizes and performs proactive service, repairs, troubleshooting and overhauls to production related equipment and processing systems in a manner that ensures Safety, Reliability, and Housekeeping standards are met.Responsibilities:Specific duties include, but are not limited to:- Executes complex repairs and major overhauls to system components, and associated equipment, utilizing original equipment manufacturers recommendations and specifications - Performs the required maintenance to ensure the facility and equipment are operating correctly.- Provides mechanical and technical guidance and expertise to level 1 technicians to continually improve the education, experience and skill set within the department (teach/coach/mentor). - Conducts Predictive Maintenance inspections using predictive technologies like Vibration analysis, ultrasonic, oil analysis, Thermography.- Performs all maintenance activities in a safe, clean and efficient manner.- Replace and repair parts, rebuild equipment, align gears, shafts, pulleys and belts.- Utilizes illustrated parts breakdown manuals and operational manuals in the repair, modification and maintenance of equipment.- Performs inventory control of parts and equipment used from inventory.- Responds to all assigned maintenance work orders in a timely manner. - Performs preventive maintenance (PM) activities in accordance with the preventive maintenance plan. - Records activities in the CMMSWorking hours: 11:00 PM - 7:00 AMSkills:- Mechanical or electrical experience- Required: 2 - 5 year related experience- Prior electro-mechanical experience a plus- Proficient in performing equipment preventive maintenance.- Able to diagnose equipment faults and malfunctions.- Knowledgeable of OSHA regulations.- Must be able to work in a fast paced, high volume environment, and have a strong attention to detail. - Must be a proactive "self starter" - Must have a mechanical aptitude. - Lean 5S and/or other Six Sigma experience is a plus.- Dependability and ability to adapt to change are essential. - Ability to operate powered lift equipment (forklift, wave picker, hoists, etc.).- Requires forklift certification or ability to become forklift certified.Education:No Degree RequiredExperience:1-4 yearsQualifications:- High school diploma or general education certification.- Basic Computer skills- CMRT (Certified Maintenance and Reliability Technician) highly preferred- Vibration ISO level 1 preferred- UE (Ultrasonic) Level 1 preferred- MLT1 (Machinery Lubrication Technician 1) preferred- Ability to speak and communicate effectively utilizing the English language. For immediate consideration apply today with your resume or call/text our office at 352-728-8787.Spherion Staffing1710 Citrus Blvd. Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Ge
      Spherion Staffing has partnered with a fast growing pre-fab concrete company located in Leesburg to directly hire a Maintenance Tech II.The schedule is Sunday to Thursday from11:00 pm to 7:00 am, with a minimum starting pay rate is $25/hr.As part of a High Performance Work Team, you will assist with the ongoing development of maintenance programs such as RWP (Reliability Workflow Process), PMO (preventive Maintenance Optimization) and PdM (Predictive Maintenance). Organizes and performs proactive service, repairs, troubleshooting and overhauls to production related equipment and processing systems in a manner that ensures Safety, Reliability, and Housekeeping standards are met.Responsibilities:Specific duties include, but are not limited to:- Executes complex repairs and major overhauls to system components, and associated equipment, utilizing original equipment manufacturers recommendations and specifications - Performs the required maintenance to ensure the facility and equipment are operating correctly.- Provides mechanical and technical guidance and expertise to level 1 technicians to continually improve the education, experience and skill set within the department (teach/coach/mentor). - Conducts Predictive Maintenance inspections using predictive technologies like Vibration analysis, ultrasonic, oil analysis, Thermography.- Performs all maintenance activities in a safe, clean and efficient manner.- Replace and repair parts, rebuild equipment, align gears, shafts, pulleys and belts.- Utilizes illustrated parts breakdown manuals and operational manuals in the repair, modification and maintenance of equipment.- Performs inventory control of parts and equipment used from inventory.- Responds to all assigned maintenance work orders in a timely manner. - Performs preventive maintenance (PM) activities in accordance with the preventive maintenance plan. - Records activities in the CMMSWorking hours: 11:00 PM - 7:00 AMSkills:- Mechanical or electrical experience- Required: 2 - 5 year related experience- Prior electro-mechanical experience a plus- Proficient in performing equipment preventive maintenance.- Able to diagnose equipment faults and malfunctions.- Knowledgeable of OSHA regulations.- Must be able to work in a fast paced, high volume environment, and have a strong attention to detail. - Must be a proactive "self starter" - Must have a mechanical aptitude. - Lean 5S and/or other Six Sigma experience is a plus.- Dependability and ability to adapt to change are essential. - Ability to operate powered lift equipment (forklift, wave picker, hoists, etc.).- Requires forklift certification or ability to become forklift certified.Education:No Degree RequiredExperience:1-4 yearsQualifications:- High school diploma or general education certification.- Basic Computer skills- CMRT (Certified Maintenance and Reliability Technician) highly preferred- Vibration ISO level 1 preferred- UE (Ultrasonic) Level 1 preferred- MLT1 (Machinery Lubrication Technician 1) preferred- Ability to speak and communicate effectively utilizing the English language. For immediate consideration apply today with your resume or call/text our office at 352-728-8787.Spherion Staffing1710 Citrus Blvd. Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Ge
      • Bradenton, Florida
      • Permanent
      • $22.00 - $28.00 per hour
      • 7:00 AM - 4:30 PM
      Spherion is actively recruiting for a direct hire opportunity for a CNC Maintenance Mechanic with an industrial products manufacturing company in the Sarasota area.Responsibilities:Experienced Mechanic for troubleshooting, repairs and preventative maintenance of a large number of production equipment from basic hydraulic equipment to complex CNC machinery, performing both electrical and mechanical work.Working under the general direction of the Director of Manufacturing with minimum supervision, the Maintenance Mechanic is responsible for the internal maintenance of CNC equipment such as STAR?s, Hass, Doosan?s CNC machines and a variety of other manufacturing equipment.Working hours: 7:00 AM - 4:30 PMSkills:Performs all maintenance mechanic operations on a wide variety of electronic, electro-mechanical, and mechanical equipment to ensure continual operation of equipment and facility.Respond to emergency breakdowns of equipment to keep production loss to a minimum.Work with contractors and other maintenance personnel, if necessary, to ensure repairs are made properly and with minimum impact on operations.Provide a high level of service to all internal and external customers. Contribute to positive teamwork environment.Maintain clean and safe work environment. Follow safety and environmental procedures and regulations. Report safety incidents to supervisor.Perform other duties as assigned. Participate in trainings. Accomplish related results as needed.Education:High SchoolExperience:1-4 yearsQualifications:The candidate must have 2 years of direct maintenance and repair experience on automated machinery including CNC equipment.Ability to read and understand part manuals, electrical and mechanical schematics, assembly instructions, technical documents, and troubleshooting guides.Demonstrate high degree of industrial mechanic, pneumatic, hydraulic and electrical aptitude and repair abilities.Ability to multitask job duties effectively and efficiently.Knowledge of 5S and Lean Manufacturing practices. Please respond with an updated resume for immediate considerationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is actively recruiting for a direct hire opportunity for a CNC Maintenance Mechanic with an industrial products manufacturing company in the Sarasota area.Responsibilities:Experienced Mechanic for troubleshooting, repairs and preventative maintenance of a large number of production equipment from basic hydraulic equipment to complex CNC machinery, performing both electrical and mechanical work.Working under the general direction of the Director of Manufacturing with minimum supervision, the Maintenance Mechanic is responsible for the internal maintenance of CNC equipment such as STAR?s, Hass, Doosan?s CNC machines and a variety of other manufacturing equipment.Working hours: 7:00 AM - 4:30 PMSkills:Performs all maintenance mechanic operations on a wide variety of electronic, electro-mechanical, and mechanical equipment to ensure continual operation of equipment and facility.Respond to emergency breakdowns of equipment to keep production loss to a minimum.Work with contractors and other maintenance personnel, if necessary, to ensure repairs are made properly and with minimum impact on operations.Provide a high level of service to all internal and external customers. Contribute to positive teamwork environment.Maintain clean and safe work environment. Follow safety and environmental procedures and regulations. Report safety incidents to supervisor.Perform other duties as assigned. Participate in trainings. Accomplish related results as needed.Education:High SchoolExperience:1-4 yearsQualifications:The candidate must have 2 years of direct maintenance and repair experience on automated machinery including CNC equipment.Ability to read and understand part manuals, electrical and mechanical schematics, assembly instructions, technical documents, and troubleshooting guides.Demonstrate high degree of industrial mechanic, pneumatic, hydraulic and electrical aptitude and repair abilities.Ability to multitask job duties effectively and efficiently.Knowledge of 5S and Lean Manufacturing practices. Please respond with an updated resume for immediate considerationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Leesburg, Florida
      • Permanent
      • $29.85 per hour
      • 11:00 PM - 7:00 AM
      Spherion Staffing has partnered with a fast growing pre-fab concrete company located in Leesburg to directly hire a Maintenance Tech III.The schedule is Sunday to Thursday from11:00 pm to 7:00 am, with a minimum starting pay rate is $29.85/hr.As part of a High Performance Work Team, assists with the ongoing development of maintenance programs such as RWP (Reliability Workflow Process), PMO (preventive Maintenance Optimization) and PdM (Predictive Maintenance).Responsibilities:The Maintenance Tech III will organize and perform proactive service, repairs, troubleshooting and overhauls to production related equipment and processing systems in a manner that ensures Safety, Reliability, and Housekeeping standards are met on 3rd Shift. Specific duties include, but are not limited to:- Executes complex repairs and major overhauls to system components, and associated equipment, utilizing original equipment manufacturers recommendations and specifications - Performs the required maintenance to ensure the facility and equipment are operating correctly.- Provides mechanical and technical guidance and expertise to level 1 technicians to continually improve the education, experience and skill set within the department (teach/coach/mentor). - Conducts Predictive Maintenance inspections using predictive technologies like Vibration analysis, ultrasonic, oil analysis, Thermography.- Performs all maintenance activities in a safe, clean and efficient manner.- Replace and repair parts, rebuild equipment, align gears, shafts, pulleys and belts.- Utilizes illustrated parts breakdown manuals and operational manuals in the repair, modification and maintenance of equipment.- Performs inventory control of parts and equipment used from inventory.- Responds to all assigned maintenance work orders in a timely manner. - Performs preventive maintenance (PM) activities in accordance with the preventive maintenance plan. - Records activities in the CMMSWorking hours: 11:00 PM - 7:00 AMSkills:- Mechanical or electrical experience- Required: 2 - 5 year related experience- Prior electro-mechanical experience a plus- Proficient in performing equipment preventive maintenance.- Able to diagnose equipment faults and malfunctions.- Knowledgeable of OSHA regulations.- Must be able to work in a fast paced, high volume environment, and have a strong attention to detail. - Must be a proactive "self starter" - Must have a mechanical aptitude. - Lean 5S and/or other Six Sigma experience is a plus.- Dependability and ability to adapt to change are essential.- - Ability to operate powered lift equipment (forklift, wave picker, hoists, etc.).- Requires forklift certification or ability to become forklift certified.Education:High SchoolExperience:1-4 yearsQualifications:- High school diploma or general education certification.- Basic Computer skills- CMRT (Certified Maintenance and Reliability Technician) highly preferred- Vibration ISO level 1 preferred- UE (Ultrasonic) Level 1 preferred- MLT1 (Machinery Lubrication Technician 1) preferred- Ability to speak and communicate effectively utilizing the English language. For immediate consideration apply today with your resume or call/text our office at 352-728-8787.Spherion Staffing1710 Citrus Blvd. Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disab
      Spherion Staffing has partnered with a fast growing pre-fab concrete company located in Leesburg to directly hire a Maintenance Tech III.The schedule is Sunday to Thursday from11:00 pm to 7:00 am, with a minimum starting pay rate is $29.85/hr.As part of a High Performance Work Team, assists with the ongoing development of maintenance programs such as RWP (Reliability Workflow Process), PMO (preventive Maintenance Optimization) and PdM (Predictive Maintenance).Responsibilities:The Maintenance Tech III will organize and perform proactive service, repairs, troubleshooting and overhauls to production related equipment and processing systems in a manner that ensures Safety, Reliability, and Housekeeping standards are met on 3rd Shift. Specific duties include, but are not limited to:- Executes complex repairs and major overhauls to system components, and associated equipment, utilizing original equipment manufacturers recommendations and specifications - Performs the required maintenance to ensure the facility and equipment are operating correctly.- Provides mechanical and technical guidance and expertise to level 1 technicians to continually improve the education, experience and skill set within the department (teach/coach/mentor). - Conducts Predictive Maintenance inspections using predictive technologies like Vibration analysis, ultrasonic, oil analysis, Thermography.- Performs all maintenance activities in a safe, clean and efficient manner.- Replace and repair parts, rebuild equipment, align gears, shafts, pulleys and belts.- Utilizes illustrated parts breakdown manuals and operational manuals in the repair, modification and maintenance of equipment.- Performs inventory control of parts and equipment used from inventory.- Responds to all assigned maintenance work orders in a timely manner. - Performs preventive maintenance (PM) activities in accordance with the preventive maintenance plan. - Records activities in the CMMSWorking hours: 11:00 PM - 7:00 AMSkills:- Mechanical or electrical experience- Required: 2 - 5 year related experience- Prior electro-mechanical experience a plus- Proficient in performing equipment preventive maintenance.- Able to diagnose equipment faults and malfunctions.- Knowledgeable of OSHA regulations.- Must be able to work in a fast paced, high volume environment, and have a strong attention to detail. - Must be a proactive "self starter" - Must have a mechanical aptitude. - Lean 5S and/or other Six Sigma experience is a plus.- Dependability and ability to adapt to change are essential.- - Ability to operate powered lift equipment (forklift, wave picker, hoists, etc.).- Requires forklift certification or ability to become forklift certified.Education:High SchoolExperience:1-4 yearsQualifications:- High school diploma or general education certification.- Basic Computer skills- CMRT (Certified Maintenance and Reliability Technician) highly preferred- Vibration ISO level 1 preferred- UE (Ultrasonic) Level 1 preferred- MLT1 (Machinery Lubrication Technician 1) preferred- Ability to speak and communicate effectively utilizing the English language. For immediate consideration apply today with your resume or call/text our office at 352-728-8787.Spherion Staffing1710 Citrus Blvd. Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disab
      • Fort Pierce, Florida
      • Temp to Perm
      • $17.00 - $23.00 per hour
      • 8:00 AM - 5:00 PM
      Summary: The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives.Responsibilities:1. Perform highly diversified duties to install and maintain production machines and the plant facility's equipment.2. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.3. Perform simple machinist duties and responsibilities.4. Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.5. Read and interpret equipment manuals and work orders to perform required maintenance and service.6. Diagnose problems, replace or repair parts, test and make adjustments.7. Perform regular preventive maintenance on machines, equipment and plant facilities.8. Perform a variety of plumbing maintenance and carpentry functions.9. Use a variety of hand and power tools, electric meters and material handling equipment in performing duties.10. Detect faulty operations, defective material and report those and any unusual situations to proper supervision.11. Comply with safety regulations and maintain clean and orderly work areas.Working hours: 8:00 AM - 5:00 PMSkills:Plumbing knowledge to address leaks, clogs or other drainage problemsCarpentry ability to handle basic repairs around the buildingAttention to detail to ensure that all jobs are completed in an exemplary manner and any potential hazards or warning signs of problems are not overlookedPhysical stamina to handle a full shift of being active and working on the buildingMechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.Education:High SchoolExperience:4-7 yearsQualifications:1. Technical Capacity.2. Ethical Conduct.3. Communication Proficiency.4. Results Driven.5. Initiative.6. Knowledge in plumbing, carpentry, electrical, pneumatic, hydraulic, and troubleshooting industrial production machinery. If you have what we are looking for and have the qualifications, please apply today at https://www.spherion.com/apply/. Make sure to upload your resume with AT LEAST THE LAST 7 YEARS OF WORK HISTORY.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Summary: The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives.Responsibilities:1. Perform highly diversified duties to install and maintain production machines and the plant facility's equipment.2. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.3. Perform simple machinist duties and responsibilities.4. Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.5. Read and interpret equipment manuals and work orders to perform required maintenance and service.6. Diagnose problems, replace or repair parts, test and make adjustments.7. Perform regular preventive maintenance on machines, equipment and plant facilities.8. Perform a variety of plumbing maintenance and carpentry functions.9. Use a variety of hand and power tools, electric meters and material handling equipment in performing duties.10. Detect faulty operations, defective material and report those and any unusual situations to proper supervision.11. Comply with safety regulations and maintain clean and orderly work areas.Working hours: 8:00 AM - 5:00 PMSkills:Plumbing knowledge to address leaks, clogs or other drainage problemsCarpentry ability to handle basic repairs around the buildingAttention to detail to ensure that all jobs are completed in an exemplary manner and any potential hazards or warning signs of problems are not overlookedPhysical stamina to handle a full shift of being active and working on the buildingMechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.Education:High SchoolExperience:4-7 yearsQualifications:1. Technical Capacity.2. Ethical Conduct.3. Communication Proficiency.4. Results Driven.5. Initiative.6. Knowledge in plumbing, carpentry, electrical, pneumatic, hydraulic, and troubleshooting industrial production machinery. If you have what we are looking for and have the qualifications, please apply today at https://www.spherion.com/apply/. Make sure to upload your resume with AT LEAST THE LAST 7 YEARS OF WORK HISTORY.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Lakeland, Florida
      • Permanent
      • $68,000 - $110,000 per year
      • 7:00 AM - 4:30 PM
      Spherion Staffing has partnered with a energy solutions and manufacturing company to grow their engineering team. Currently recruiting for a direct hire Industrial Electrician to perform inspection, repair and maintenance on high voltage electrical equipment and service within aggregate processing and distribution sites.Responsibilities:Perform electrical inspection, diagnosis, and repairs on industrial power generation equipment.Install, adjust and maintain all electrical equipment, gauges and instruments.Troubleshoot, evaluate and coordinate electrical needs, repairs and modifications.Ensure that manufacturers? standards of repair and maintenance are performed on all equipment.Perform additional responsibilities as requested or assigned.Wear proper safety equipment while on plant grounds.Meet or exceed company safety standards.Must be able to accurately complete all required paperwork and communicating all concerns with management.Must maintain a clean working facility as well as equipment.Must be able to maintain acceptable attendance in a flexible work schedule.Properly follow & promote all company policies and OSHA/MSHA regulations for safe working procedures and environment.Must maintain at all times a strict adherence to safety requirements and procedures.Must be available to travel and work at multiple sites within your geographic region.Must possess a professional attitude while interacting with peers, customers and general public.May be required to operate vehicles or heavy equipment as needed for work site.Working hours: 7:00 AM - 4:30 PMSkills:Bilingual a plus.Education:High SchoolExperience:4-7 yearsQualifications:High school graduate. Prefer Associates Degree or equivalent in electrical maintenance experience.5 years electrical maintenance experience.2 years industrial experience.Individuals must possess the following knowledge, skills and abilities or be able to explain and demonstrate that they can perform the essential functions of the job with or without reasonable accommodations, using some combination of skills and abilities. Power distribution experience or understanding up to 4160 volts required.Programmable logic control and digital drive experience preferredElectrical troubleshooting skills and experience with motor control circuits and relay logic.Able to prioritize tasks and work as a team member, as well as individually. Be able to install electrical equipment such as panel boards, disconnect switches, etc.Have experience bending, threading, and installing rigid conduit. Have experience in cable and wire termination.Be willing to perform physically demanding tasks, such as working from heights, climbing ladders, etc.Observe all safety policies and procedures to ensure jobs are completed safely.Be able to lift 50 pounds.Be motivated and willing to attend additional training classes to keep up with a changing industry.Work as part of a team.High school graduate. Prefer Associates Degree or equivalent in electrical maintenance experience.Have strong verbal and written communication skills.Be able to read, write, and speak English. Please apply with a current resume for immediate consideration by a member of our Professional Services recruiting team!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any
      Spherion Staffing has partnered with a energy solutions and manufacturing company to grow their engineering team. Currently recruiting for a direct hire Industrial Electrician to perform inspection, repair and maintenance on high voltage electrical equipment and service within aggregate processing and distribution sites.Responsibilities:Perform electrical inspection, diagnosis, and repairs on industrial power generation equipment.Install, adjust and maintain all electrical equipment, gauges and instruments.Troubleshoot, evaluate and coordinate electrical needs, repairs and modifications.Ensure that manufacturers? standards of repair and maintenance are performed on all equipment.Perform additional responsibilities as requested or assigned.Wear proper safety equipment while on plant grounds.Meet or exceed company safety standards.Must be able to accurately complete all required paperwork and communicating all concerns with management.Must maintain a clean working facility as well as equipment.Must be able to maintain acceptable attendance in a flexible work schedule.Properly follow & promote all company policies and OSHA/MSHA regulations for safe working procedures and environment.Must maintain at all times a strict adherence to safety requirements and procedures.Must be available to travel and work at multiple sites within your geographic region.Must possess a professional attitude while interacting with peers, customers and general public.May be required to operate vehicles or heavy equipment as needed for work site.Working hours: 7:00 AM - 4:30 PMSkills:Bilingual a plus.Education:High SchoolExperience:4-7 yearsQualifications:High school graduate. Prefer Associates Degree or equivalent in electrical maintenance experience.5 years electrical maintenance experience.2 years industrial experience.Individuals must possess the following knowledge, skills and abilities or be able to explain and demonstrate that they can perform the essential functions of the job with or without reasonable accommodations, using some combination of skills and abilities. Power distribution experience or understanding up to 4160 volts required.Programmable logic control and digital drive experience preferredElectrical troubleshooting skills and experience with motor control circuits and relay logic.Able to prioritize tasks and work as a team member, as well as individually. Be able to install electrical equipment such as panel boards, disconnect switches, etc.Have experience bending, threading, and installing rigid conduit. Have experience in cable and wire termination.Be willing to perform physically demanding tasks, such as working from heights, climbing ladders, etc.Observe all safety policies and procedures to ensure jobs are completed safely.Be able to lift 50 pounds.Be motivated and willing to attend additional training classes to keep up with a changing industry.Work as part of a team.High school graduate. Prefer Associates Degree or equivalent in electrical maintenance experience.Have strong verbal and written communication skills.Be able to read, write, and speak English. Please apply with a current resume for immediate consideration by a member of our Professional Services recruiting team!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any
      • Fort Pierce, Florida
      • Temp to Perm
      • $20.00 - $25.00 per hour
      • 3:30 PM - 2:00 AM
      Summary: The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives.Responsibilities:1. Perform highly diversified duties to install and maintain production machines and the plant facility's equipment.2. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.3. Perform simple machinist duties and responsibilities.4. Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.5. Read and interpret equipment manuals and work orders to perform required maintenance and service.6. Diagnose problems, replace or repair parts, test and make adjustments.7. Perform regular preventive maintenance on machines, equipment and plant facilities.8. Perform a variety of plumbing maintenance and carpentry functions.9. Use a variety of hand and power tools, electric meters and material handling equipment in performing duties.10. Detect faulty operations, defective material and report those and any unusual situations to proper supervision.11. Comply with safety regulations and maintain clean and orderly work areas.Working hours: 3:30 PM - 2:00 AMSkills:Plumbing knowledge to address leaks, clogs or other drainage problemsCarpentry ability to handle basic repairs around the buildingAttention to detail to ensure that all jobs are completed in an exemplary manner and any potential hazards or warning signs of problems are not overlookedPhysical stamina to handle a full shift of being active and working on the buildingMechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.Education:High SchoolExperience:4-7 yearsQualifications:1. Technical Capacity.2. Ethical Conduct.3. Communication Proficiency.4. Results Driven.5. Initiative.6. Knowledge in plumbing, carpentry, electrical, pneumatic, hydraulic, and troubleshooting industrial production machinery. If you have what we are looking for and have the qualifications, please apply today at https://www.spherion.com/apply/. Make sure to upload your resume with AT LEAST THE LAST 7 YEARS OF WORK HISTORY.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Summary: The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives.Responsibilities:1. Perform highly diversified duties to install and maintain production machines and the plant facility's equipment.2. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.3. Perform simple machinist duties and responsibilities.4. Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.5. Read and interpret equipment manuals and work orders to perform required maintenance and service.6. Diagnose problems, replace or repair parts, test and make adjustments.7. Perform regular preventive maintenance on machines, equipment and plant facilities.8. Perform a variety of plumbing maintenance and carpentry functions.9. Use a variety of hand and power tools, electric meters and material handling equipment in performing duties.10. Detect faulty operations, defective material and report those and any unusual situations to proper supervision.11. Comply with safety regulations and maintain clean and orderly work areas.Working hours: 3:30 PM - 2:00 AMSkills:Plumbing knowledge to address leaks, clogs or other drainage problemsCarpentry ability to handle basic repairs around the buildingAttention to detail to ensure that all jobs are completed in an exemplary manner and any potential hazards or warning signs of problems are not overlookedPhysical stamina to handle a full shift of being active and working on the buildingMechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.Education:High SchoolExperience:4-7 yearsQualifications:1. Technical Capacity.2. Ethical Conduct.3. Communication Proficiency.4. Results Driven.5. Initiative.6. Knowledge in plumbing, carpentry, electrical, pneumatic, hydraulic, and troubleshooting industrial production machinery. If you have what we are looking for and have the qualifications, please apply today at https://www.spherion.com/apply/. Make sure to upload your resume with AT LEAST THE LAST 7 YEARS OF WORK HISTORY.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Gainesville, Florida
      • Temp to Perm
      • $14.00 per hour
      • 7:00 AM - 5:30 PM
      Spherion Gainesville, FL has a client actively looking for a Groundskeeper/Landscaper to perform physical labor relating to basic grounds and landscaping maintenance. Let's get to work. Temporary with the possibility of a permanent positionGainesville, FL Schedule: FT Salary: $14Responsibilities:- Mow, trim, edge, weed, plant, water, fertilize, mulch grounds- Operate and maintain grounds keeping machinery - Prune shrubs- General maintenance - Other duties as assignedWorking hours: 7:00 AM - 5:30 PMSkills:- Ability to work outdoors for 8 hours per dayEducation:High SchoolExperience:0-1 yearsQualifications:- High School Diploma or GED preferred- Must have prior outdoor work experience Are you ready to start your next career? Please click here https://www.spherion.com/apply/75796/ to apply or call 352-378-2300 to inquire about our job opportunities.We offer Medical, Dental, 401(k) and bonuses! We pay weekly!Spherion Gainesville, FL is a drug free workplace.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Gainesville, FL has a client actively looking for a Groundskeeper/Landscaper to perform physical labor relating to basic grounds and landscaping maintenance. Let's get to work. Temporary with the possibility of a permanent positionGainesville, FL Schedule: FT Salary: $14Responsibilities:- Mow, trim, edge, weed, plant, water, fertilize, mulch grounds- Operate and maintain grounds keeping machinery - Prune shrubs- General maintenance - Other duties as assignedWorking hours: 7:00 AM - 5:30 PMSkills:- Ability to work outdoors for 8 hours per dayEducation:High SchoolExperience:0-1 yearsQualifications:- High School Diploma or GED preferred- Must have prior outdoor work experience Are you ready to start your next career? Please click here https://www.spherion.com/apply/75796/ to apply or call 352-378-2300 to inquire about our job opportunities.We offer Medical, Dental, 401(k) and bonuses! We pay weekly!Spherion Gainesville, FL is a drug free workplace.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Pensacola, Florida
      • Temp to Perm
      • $15.00 per hour
      • 6:30 AM - 4:30 PM (Various Shifts Available)
      We have 2 openings for our Aerospace client. We have openings on 1st shift 6:30 AM- 4 PM and 2nd shift 4:00PM -1:30AM. This position pays $13/ per hour and is a Full-Time Temp to Hire Position. This employee should be proficient in Data Entry and Excel to be considered.Responsibilities:-Perform day-to-day data entry requirements for the aircraft maintenance visit.-Provide accountability for aircraft paperwork.-Support aircraft Production requests as necessary.Working hours: 6:30 AM - 4:30 PM (Various Shifts Available)Skills:-The incumbent normally performs the duty assignment at his or her discretion and is limited only by policies set by administrative or legislative authority.-Must be able to work without direct supervision.-A high level of interpersonal skills is required to maintain an effective relationship between various departments, management and customer representatives.-Essential responsibilities are performed in a climate controlled office but not limited to the office.-Must be able to work odd shift times and weekends.Education:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalentPrevious data entry experience required.Demonstrated proficiency in MS Excel and Data entry Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have 2 openings for our Aerospace client. We have openings on 1st shift 6:30 AM- 4 PM and 2nd shift 4:00PM -1:30AM. This position pays $13/ per hour and is a Full-Time Temp to Hire Position. This employee should be proficient in Data Entry and Excel to be considered.Responsibilities:-Perform day-to-day data entry requirements for the aircraft maintenance visit.-Provide accountability for aircraft paperwork.-Support aircraft Production requests as necessary.Working hours: 6:30 AM - 4:30 PM (Various Shifts Available)Skills:-The incumbent normally performs the duty assignment at his or her discretion and is limited only by policies set by administrative or legislative authority.-Must be able to work without direct supervision.-A high level of interpersonal skills is required to maintain an effective relationship between various departments, management and customer representatives.-Essential responsibilities are performed in a climate controlled office but not limited to the office.-Must be able to work odd shift times and weekends.Education:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalentPrevious data entry experience required.Demonstrated proficiency in MS Excel and Data entry Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Wildwood, Florida
      • Temp to Perm
      • $14.00 per hour
      • 7:30 AM - 4:30 PM
      Spherion Staffing Leesburg, FL has partnered with the largest golf car retailer in the US located in The Villages to fill Service Technician positions.The schedule is Monday to Friday 7:30 am to 4:30 pm and possible overtime.The starting pay rate is $14/hr.Responsibilities:Service Technicians will perform repairs and maintenance to golf carts. The duties may include battery replacement/charging, tire replacement, engine repairs, wiring, oil/fluid changes and more.Working hours: 7:30 AM - 4:30 PMSkills:- Ability to examine carts to determine needed repairs- Ability to use hand and power tools- Ability to work with others- Ability to enter data on work ordersEducation:High SchoolExperience:1-4 yearsQualifications:- minimum 1-2 years mechanic experience- Background check and drug screens required for all candidates made a conditional offer For immediate consideration apply today with your resume or call/text our office at 352-728-8787.Spherion Staffing1710 Citrus Blvd. Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing Leesburg, FL has partnered with the largest golf car retailer in the US located in The Villages to fill Service Technician positions.The schedule is Monday to Friday 7:30 am to 4:30 pm and possible overtime.The starting pay rate is $14/hr.Responsibilities:Service Technicians will perform repairs and maintenance to golf carts. The duties may include battery replacement/charging, tire replacement, engine repairs, wiring, oil/fluid changes and more.Working hours: 7:30 AM - 4:30 PMSkills:- Ability to examine carts to determine needed repairs- Ability to use hand and power tools- Ability to work with others- Ability to enter data on work ordersEducation:High SchoolExperience:1-4 yearsQualifications:- minimum 1-2 years mechanic experience- Background check and drug screens required for all candidates made a conditional offer For immediate consideration apply today with your resume or call/text our office at 352-728-8787.Spherion Staffing1710 Citrus Blvd. Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Gainesville, Florida
      • Temp to Perm
      • $16.00 per hour
      • 6:00 AM - 6:00 PM
      Spherion Gainesville, FL has a client looking for a Welder to join their team! You will be responsible for performing fabrications and welding. The ideal candidate has previous welding experience and a willingness to learn and be a part of the team. Let's get to work. Immediate Opening!Gainesville, FLSalary: $16/hrSchedule: Mon - Sat, 40 plus hours/weekPlease email resumes to Rose Crane - rosecrane@spherion.comResponsibilities:- Perform welding on aluminum parts to repair parts- Perform repairs as required- Read blueprints and schematics to perform any procedures- Maintain equipment and set up components- Test and inspect welded surfaces- Assist Supervisor in materials inventory- Other duties as assignedWorking hours: 6:00 AM - 6:00 PMSkills:- Proven/demonstrated ability with heavy machinery and toolsEducation:High SchoolExperience:1-4 yearsQualifications:- High School Diploma or equivalent- 1+ years? experience in welding- Equivalent education and work experience may be considered- Forklift experience preferred- Ability to read blueprints and schematics preferred- MIG Welding Experience required Are you ready to start your next career? Please click here https://www.spherion.com/apply/75796/ to apply or call 352-378-2300 to inquire about our job opportunities.We offer Medical, Dental, 401(k) and bonuses! We pay weekly!Spherion Gainesville, FL is a drug free workplace.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Gainesville, FL has a client looking for a Welder to join their team! You will be responsible for performing fabrications and welding. The ideal candidate has previous welding experience and a willingness to learn and be a part of the team. Let's get to work. Immediate Opening!Gainesville, FLSalary: $16/hrSchedule: Mon - Sat, 40 plus hours/weekPlease email resumes to Rose Crane - rosecrane@spherion.comResponsibilities:- Perform welding on aluminum parts to repair parts- Perform repairs as required- Read blueprints and schematics to perform any procedures- Maintain equipment and set up components- Test and inspect welded surfaces- Assist Supervisor in materials inventory- Other duties as assignedWorking hours: 6:00 AM - 6:00 PMSkills:- Proven/demonstrated ability with heavy machinery and toolsEducation:High SchoolExperience:1-4 yearsQualifications:- High School Diploma or equivalent- 1+ years? experience in welding- Equivalent education and work experience may be considered- Forklift experience preferred- Ability to read blueprints and schematics preferred- MIG Welding Experience required Are you ready to start your next career? Please click here https://www.spherion.com/apply/75796/ to apply or call 352-378-2300 to inquire about our job opportunities.We offer Medical, Dental, 401(k) and bonuses! We pay weekly!Spherion Gainesville, FL is a drug free workplace.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Zephyrhills, Florida
      • Temp to Perm
      • $18.00 - $20.00 per hour
      • Various Shifts Available
      Spherion is currently seeking Blow Mold Machine Operators to fill a temp to PERMANENT position!!The Blow Mold Machine Operator will operate blow-mold, grinders, trimmer machines, and conveyor systems. They are responsible for troubleshooting process problems and performing minor maintenance to ensure continued operation of the production line.WORK SCHEDULE: 2-2-3 Rotating Shift- 12 hour shifts1st Shift: 7:00am- 7:00pm 2nd shift: 7:00pm- 7:00amResponsibilities:~ Operate blow-mold machines (including wheels, reciprocating or shuttle machines) to ensure production of quality bottles~ Perform audits, weights and quality checks~ Troubleshoot and process problems~ Perform minor maintenance to ensure continued operation of the production line ~ Ensure compliance with corporate and plant safety standards~ Repair or replace pneumatic and hydraulic lines~ Assist with preventative maintenance, mold, neck and blow pin and other mechanical changes~ Grind excess bottle and materials~ Train blow-mold employees ~ Prepare and document daily production reports, including rejects, regrinds and line efficiencies and other duties as assigned.Working hours: Various Shifts AvailableSkills:~ Attention to detail is key~ Ability to stand for 10-12 hours per day~ Ability to work in non-temperature controlled warehouse~ Ability to submit to background check and drug screen~ Basic mathematical skills & computer experienceEducation:No Degree RequiredExperience:1-4 yearsQualifications:~ 1-2 years of machine operating experience~ Excellent history of attendance and communication~ Good work ethic and positive attitude Is this the job for you? Here are a few ways to apply: - Click the APPLY button on this job posting - Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 - Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!- Email resume to: naturecoast-fl@spherion.comSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is currently seeking Blow Mold Machine Operators to fill a temp to PERMANENT position!!The Blow Mold Machine Operator will operate blow-mold, grinders, trimmer machines, and conveyor systems. They are responsible for troubleshooting process problems and performing minor maintenance to ensure continued operation of the production line.WORK SCHEDULE: 2-2-3 Rotating Shift- 12 hour shifts1st Shift: 7:00am- 7:00pm 2nd shift: 7:00pm- 7:00amResponsibilities:~ Operate blow-mold machines (including wheels, reciprocating or shuttle machines) to ensure production of quality bottles~ Perform audits, weights and quality checks~ Troubleshoot and process problems~ Perform minor maintenance to ensure continued operation of the production line ~ Ensure compliance with corporate and plant safety standards~ Repair or replace pneumatic and hydraulic lines~ Assist with preventative maintenance, mold, neck and blow pin and other mechanical changes~ Grind excess bottle and materials~ Train blow-mold employees ~ Prepare and document daily production reports, including rejects, regrinds and line efficiencies and other duties as assigned.Working hours: Various Shifts AvailableSkills:~ Attention to detail is key~ Ability to stand for 10-12 hours per day~ Ability to work in non-temperature controlled warehouse~ Ability to submit to background check and drug screen~ Basic mathematical skills & computer experienceEducation:No Degree RequiredExperience:1-4 yearsQualifications:~ 1-2 years of machine operating experience~ Excellent history of attendance and communication~ Good work ethic and positive attitude Is this the job for you? Here are a few ways to apply: - Click the APPLY button on this job posting - Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 - Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!- Email resume to: naturecoast-fl@spherion.comSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mulberry, Florida
      • Permanent
      • $18.00 - $26.00 per hour
      • 8:00 AM - 5:00 PM
      Perform inspection, repair and maintenance on high voltage electrical equipment and servicewithin aggregate processing and distribution sites. Provide inspection and reporting services ofsite equipment. Fosters teamwork, positive work environment and overall safety of yourself andothers.Responsibilities:Perform electrical inspection, diagnosis, and repairs on industrial power generation equipment.Install, adjust and maintain all electrical equipment, gauges and instruments.??? Troubleshoot, evaluate and coordinate electrical needs, repairs and modifications.??? Ensure that manufacturers??? standards of repair and maintenance are performed on allequipment.??? Perform additional responsibilities as requested or assigned.??? Wear proper safety equipment while on plant grounds.??? Meet or exceed company safety standards.??? Must be able to accurately complete all required paperwork and communicating allconcerns with management.??? Must maintain a clean working facility as well as equipment.??? Must be able to maintain acceptable attendance in a flexible work schedule.??? Properly follow & promote all company policies and OSHA/MSHA regulations for safeworking procedures and environment.??? Must maintain at all times a strict adherence to safety requirements and procedures.??? Must be available to travel and work at multiple sites within your geographic region.??? Must possess a professional attitude while interacting with peers, customers and generalpublic.??? May be required to operate vehicles or heavy equipment as needed for work site.Working hours: 8:00 AM - 5:00 PMSkills:- 5 years electrical maintenance experience.- 2 years industrial experience.- Power distribution experience or understanding up to 4160 volts required.- Programmable logic control and digital drive experience preferred- Electrical troubleshooting skills and experience with motor control circuits and relay logic.- Able to prioritize tasks and work as a team member, as well as individually.- Be able to install electrical equipment such as panel boards, disconnect switches, etc.- Have experience bending, threading, and installing rigid conduit.- Have experience in cable and wire termination.- Be willing to perform physically demanding tasks, such as working from heights, climbingladders, etc.- Observe all safety policies and procedures to ensure jobs are completed safely.- Be able to lift 50 pounds.- Be motivated and willing to attend additional training classes to keep up with a changingindustry.- Work as part of a team.- High school graduate. Prefer Associates Degree or equivalent in electrical maintenanceexperience.- Have strong verbal and written communication skills.- Be able to read, write, and speak English.- Bilingual a plus.Education:High SchoolExperience:4-7 yearsQualifications:??? Must pass pre-employment physical, drug screen, criminal background check and drivingrecord review.??? Must be willing to work flexible schedule including: nights, weekends and holidays whennecessary.??? Must be legally authorized to work in The United States.??? Must demonstrate a strong commitment to??safety.??? Regular and timely attendance is required.Knowledge/Skill Requirements??? Ability to understand and follow verbal and written instructions.??? Ability to effectively communicate verbally and in writing.??? Ability to use power tools. Direct Hire Opportunity!email resume to melissatomachesky@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform inspection, repair and maintenance on high voltage electrical equipment and servicewithin aggregate processing and distribution sites. Provide inspection and reporting services ofsite equipment. Fosters teamwork, positive work environment and overall safety of yourself andothers.Responsibilities:Perform electrical inspection, diagnosis, and repairs on industrial power generation equipment.Install, adjust and maintain all electrical equipment, gauges and instruments.??? Troubleshoot, evaluate and coordinate electrical needs, repairs and modifications.??? Ensure that manufacturers??? standards of repair and maintenance are performed on allequipment.??? Perform additional responsibilities as requested or assigned.??? Wear proper safety equipment while on plant grounds.??? Meet or exceed company safety standards.??? Must be able to accurately complete all required paperwork and communicating allconcerns with management.??? Must maintain a clean working facility as well as equipment.??? Must be able to maintain acceptable attendance in a flexible work schedule.??? Properly follow & promote all company policies and OSHA/MSHA regulations for safeworking procedures and environment.??? Must maintain at all times a strict adherence to safety requirements and procedures.??? Must be available to travel and work at multiple sites within your geographic region.??? Must possess a professional attitude while interacting with peers, customers and generalpublic.??? May be required to operate vehicles or heavy equipment as needed for work site.Working hours: 8:00 AM - 5:00 PMSkills:- 5 years electrical maintenance experience.- 2 years industrial experience.- Power distribution experience or understanding up to 4160 volts required.- Programmable logic control and digital drive experience preferred- Electrical troubleshooting skills and experience with motor control circuits and relay logic.- Able to prioritize tasks and work as a team member, as well as individually.- Be able to install electrical equipment such as panel boards, disconnect switches, etc.- Have experience bending, threading, and installing rigid conduit.- Have experience in cable and wire termination.- Be willing to perform physically demanding tasks, such as working from heights, climbingladders, etc.- Observe all safety policies and procedures to ensure jobs are completed safely.- Be able to lift 50 pounds.- Be motivated and willing to attend additional training classes to keep up with a changingindustry.- Work as part of a team.- High school graduate. Prefer Associates Degree or equivalent in electrical maintenanceexperience.- Have strong verbal and written communication skills.- Be able to read, write, and speak English.- Bilingual a plus.Education:High SchoolExperience:4-7 yearsQualifications:??? Must pass pre-employment physical, drug screen, criminal background check and drivingrecord review.??? Must be willing to work flexible schedule including: nights, weekends and holidays whennecessary.??? Must be legally authorized to work in The United States.??? Must demonstrate a strong commitment to??safety.??? Regular and timely attendance is required.Knowledge/Skill Requirements??? Ability to understand and follow verbal and written instructions.??? Ability to effectively communicate verbally and in writing.??? Ability to use power tools. Direct Hire Opportunity!email resume to melissatomachesky@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Sarasota, Florida
      • Temp to Perm
      • $16.00 - $18.00 per hour
      • 7:30 AM - 4:00 PM
      Spherion Sarasota is looking for a Machine operator to work in a team environment handling various duties involving machine operation.Responsibilities:Understands and follow all cGMP manufacturing procedures, SOPs, Work Orders and production schedules. Performs manufacturing operations with a quality focus and meets production requirements.Deals with fillers, tablets and powers. Will weight and measure raw materials to align with production standards.Accurately completes paperwork associated with production orders and batch records.Performs machine setup and tear down.Troubleshooting issues and making machine adjustments.Maintains a safe working environment by complying with procedures and regulations.Able to work different shifts, split shifts, weekends and overtime when necessary.Performs other duties as assigned by Management.Working hours: 7:30 AM - 4:00 PMSkills:Prior production oriented machine operation skills and experience (must be above entry-level skills) Mechanical aptitudeAbility to solve problems, troubleshoot and stay on schedule with production.Education:High SchoolExperience:4-7 yearsQualifications:High School Diploma, GED or commensurate work experience requiredAbility to work within a team environment4 + years related work experience in machine operation, production or maintenance in a high volume, high product mix industry; regulated industry, preferred Ability to add, subtract, multiply, and divide requiredAbility to speak, read, write and understand English languageAbility to use small hand tools, pallet jack, and hand cart. Apply now. We're local. You're local. Lets get you working. Great temp to hire option for the properly skilled candidate.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Sarasota is looking for a Machine operator to work in a team environment handling various duties involving machine operation.Responsibilities:Understands and follow all cGMP manufacturing procedures, SOPs, Work Orders and production schedules. Performs manufacturing operations with a quality focus and meets production requirements.Deals with fillers, tablets and powers. Will weight and measure raw materials to align with production standards.Accurately completes paperwork associated with production orders and batch records.Performs machine setup and tear down.Troubleshooting issues and making machine adjustments.Maintains a safe working environment by complying with procedures and regulations.Able to work different shifts, split shifts, weekends and overtime when necessary.Performs other duties as assigned by Management.Working hours: 7:30 AM - 4:00 PMSkills:Prior production oriented machine operation skills and experience (must be above entry-level skills) Mechanical aptitudeAbility to solve problems, troubleshoot and stay on schedule with production.Education:High SchoolExperience:4-7 yearsQualifications:High School Diploma, GED or commensurate work experience requiredAbility to work within a team environment4 + years related work experience in machine operation, production or maintenance in a high volume, high product mix industry; regulated industry, preferred Ability to add, subtract, multiply, and divide requiredAbility to speak, read, write and understand English languageAbility to use small hand tools, pallet jack, and hand cart. Apply now. We're local. You're local. Lets get you working. Great temp to hire option for the properly skilled candidate.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Crestview, Florida
      • Temp to Perm
      • $14.42 - $14.92 per hour
      • 8:00 PM - 7:00 AM
      We are seeking multiple Packaging/Machine Operators for our client in the Crestview area. They are looking to hire right away, so if this sounds like a position for you, APPLY NOW!Responsibilities:Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functionsDetects and reports defective materials or questionable conditions to the shift supervisor.Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations.Must be familiar with the basic machine functions in order to perform the tasks stated above.Must be willing to accept and receive frequent supervision and assistance with regard to machine set-up.Team PlayerA basic understanding of addition and subtraction.Assist in other areas as neededWorking hours: 8:00 PM - 7:00 AMSkills:Effective communication, include speaking, writing, active listening and taking instructionGood leadership and training skillsQuick troubleshooting and problem-solving skillsAdvanced knowledge of following blueprints and manualsExcellent mechanical skills, including comfort with using tools to make simple repairsGreat time managementKeen attention to detail to identify maintenance, product or operations issuesAbility to stand, sit or be in other physically demanding positions for long periods of timeEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalent.Experience in a fast paced, high volume manufacturing environmentAbility to work in a team oriented environment.Must be able to work in an environment with exposure to heat/cold conditions and levels of noise, and potential exposure to various industrial liquids, oils, gases, and etc.Must be able to stand/walk for up to 10-12 hoursMeeting physical requirements, such as lifting, bending and standing for long periodsMust be able to lift up to 35 pounds with or without reasonable accommodationAdhere to quality service standards and comply with procedures, rules and regulations.Must be able to work a flexible/rotating work schedule, including weekends, holidays, and overtime (covering all shift schedules).Must be able to follow safety standards and practices. Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are seeking multiple Packaging/Machine Operators for our client in the Crestview area. They are looking to hire right away, so if this sounds like a position for you, APPLY NOW!Responsibilities:Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functionsDetects and reports defective materials or questionable conditions to the shift supervisor.Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations.Must be familiar with the basic machine functions in order to perform the tasks stated above.Must be willing to accept and receive frequent supervision and assistance with regard to machine set-up.Team PlayerA basic understanding of addition and subtraction.Assist in other areas as neededWorking hours: 8:00 PM - 7:00 AMSkills:Effective communication, include speaking, writing, active listening and taking instructionGood leadership and training skillsQuick troubleshooting and problem-solving skillsAdvanced knowledge of following blueprints and manualsExcellent mechanical skills, including comfort with using tools to make simple repairsGreat time managementKeen attention to detail to identify maintenance, product or operations issuesAbility to stand, sit or be in other physically demanding positions for long periods of timeEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalent.Experience in a fast paced, high volume manufacturing environmentAbility to work in a team oriented environment.Must be able to work in an environment with exposure to heat/cold conditions and levels of noise, and potential exposure to various industrial liquids, oils, gases, and etc.Must be able to stand/walk for up to 10-12 hoursMeeting physical requirements, such as lifting, bending and standing for long periodsMust be able to lift up to 35 pounds with or without reasonable accommodationAdhere to quality service standards and comply with procedures, rules and regulations.Must be able to work a flexible/rotating work schedule, including weekends, holidays, and overtime (covering all shift schedules).Must be able to follow safety standards and practices. Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Sumterville, Florida
      • Permanent
      • $30.00 - $35.00 per hour
      • 4:00 AM - 4:00 PM
      Spherion Staffing Leesburg, FL has a direct-hire opportunity for an experienced PLC Technician/Electrician to join a well established and growing manufacturer located in Sumterville, FL.The schedule varies and you must be available for day or night shifts as needed for production needs, may require overtime or Saturdays. The minimum starting pay rate is $30/hr and may increase depending on experience.Responsibilities:Installation and repair of electronics associated with machinery or mechanical equipment, specifically manufacturing machines and associated support machinery. Work involves the following: installation of electrical components, diagnose source(s) of trouble (troubleshooting), dismantle or assemble machines (partially or completely), and perform electrical, or electronic repairs as necessary. Replace broken or defective parts; report repairs needed or parts required to complete job assignments. Must have excellent knowledge electrical trade functions(electronics, PLC?s) so maintenance can be successfully performed on all machines; requires extensive training and experience.Extensive knowledge of proper preventive maintenance requirements/processes. Knowledge of machine programming (ladder logic).The PLC Technician/Electrician is a skilled level position and will require minimum of 480 hours of informal/formal training on the job. This training period will be spread over a minimum of 90 days and will additionally include safety and hazardous material handling training. Required to keep all production machinery in top operation condition at all times.Working hours: 4:00 AM - 4:00 PMSkills:-Must be able to lift from 35 to 50 pounds to a maximum of 75 pounds, i.e. 80 pound chain needs to be moved for installation.-Must be able to physically perform all assigned tasks; requires full use of both hands, arms and legs (lifting, bending, turning and crawling underneath machines).-Must possess strong knowledge and understanding in the areas of electrical trade (electronics and PLC's) including PLC ladder logic, panel views PID, VFO, encoder and servo control for automated production lines. -Possess skills to install electrical components and trouble shoot electrical problems on any and all production and support machinery.-Required to communicate in a proper manner and method, all special directions issued by immediate supervisor; must work closely with all other maintenance or construction personnel.-Responsible for preventive maintenance checks on all assigned machines; must maintain accurate and complete PM forms.-Responsible for writing job sheets and finishing all assigned tasks in a timely manner.- Be able to request necessary parts required to perform all repairs.-Will be familiar and work with personnel in all operations and functions of the pultrusion and winding machines; must gain working knowledge of machine functions.- Must possess skills necessary to read and understand electrical schematics.Education:High SchoolExperience:1-4 yearsQualifications:- Knowledge of tools and their uses (grinders, ratchets, drills, etc.)- Ability to drive a forklift and be certified within 90 days-Ability to read English (downtime reports and checklists)-Skills in addition, subtraction, multiplication and division-Knowledge of decimal equivalencies-Knowledge of how to read a tape measure, micrometer, voltage meter and caliper-Must possess basic math skills to include addition, subtraction, multiplication, division and manipulation of fractions and decimals.-Must posses skills to learn to read accurately the following: tape measure, micrometer, caliper, and electrical codes.-May be required to attend specific, designated seminars or take coursework as identified by immediate supervisor.Physical Requirements: -Must be able to lift, move, pull and carry from 10 to 100 pounds, occasionally to a height of four feet; carrying occasionally 10 to 85 pounds a distance of 10 to 40 feet. Must be able to physically For immediate consideration apply with your resume or call/text our office at 352-728-8787.Spherion Leesburg1710 Citrus Blvd. Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing Leesburg, FL has a direct-hire opportunity for an experienced PLC Technician/Electrician to join a well established and growing manufacturer located in Sumterville, FL.The schedule varies and you must be available for day or night shifts as needed for production needs, may require overtime or Saturdays. The minimum starting pay rate is $30/hr and may increase depending on experience.Responsibilities:Installation and repair of electronics associated with machinery or mechanical equipment, specifically manufacturing machines and associated support machinery. Work involves the following: installation of electrical components, diagnose source(s) of trouble (troubleshooting), dismantle or assemble machines (partially or completely), and perform electrical, or electronic repairs as necessary. Replace broken or defective parts; report repairs needed or parts required to complete job assignments. Must have excellent knowledge electrical trade functions(electronics, PLC?s) so maintenance can be successfully performed on all machines; requires extensive training and experience.Extensive knowledge of proper preventive maintenance requirements/processes. Knowledge of machine programming (ladder logic).The PLC Technician/Electrician is a skilled level position and will require minimum of 480 hours of informal/formal training on the job. This training period will be spread over a minimum of 90 days and will additionally include safety and hazardous material handling training. Required to keep all production machinery in top operation condition at all times.Working hours: 4:00 AM - 4:00 PMSkills:-Must be able to lift from 35 to 50 pounds to a maximum of 75 pounds, i.e. 80 pound chain needs to be moved for installation.-Must be able to physically perform all assigned tasks; requires full use of both hands, arms and legs (lifting, bending, turning and crawling underneath machines).-Must possess strong knowledge and understanding in the areas of electrical trade (electronics and PLC's) including PLC ladder logic, panel views PID, VFO, encoder and servo control for automated production lines. -Possess skills to install electrical components and trouble shoot electrical problems on any and all production and support machinery.-Required to communicate in a proper manner and method, all special directions issued by immediate supervisor; must work closely with all other maintenance or construction personnel.-Responsible for preventive maintenance checks on all assigned machines; must maintain accurate and complete PM forms.-Responsible for writing job sheets and finishing all assigned tasks in a timely manner.- Be able to request necessary parts required to perform all repairs.-Will be familiar and work with personnel in all operations and functions of the pultrusion and winding machines; must gain working knowledge of machine functions.- Must possess skills necessary to read and understand electrical schematics.Education:High SchoolExperience:1-4 yearsQualifications:- Knowledge of tools and their uses (grinders, ratchets, drills, etc.)- Ability to drive a forklift and be certified within 90 days-Ability to read English (downtime reports and checklists)-Skills in addition, subtraction, multiplication and division-Knowledge of decimal equivalencies-Knowledge of how to read a tape measure, micrometer, voltage meter and caliper-Must possess basic math skills to include addition, subtraction, multiplication, division and manipulation of fractions and decimals.-Must posses skills to learn to read accurately the following: tape measure, micrometer, caliper, and electrical codes.-May be required to attend specific, designated seminars or take coursework as identified by immediate supervisor.Physical Requirements: -Must be able to lift, move, pull and carry from 10 to 100 pounds, occasionally to a height of four feet; carrying occasionally 10 to 85 pounds a distance of 10 to 40 feet. Must be able to physically For immediate consideration apply with your resume or call/text our office at 352-728-8787.Spherion Leesburg1710 Citrus Blvd. Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Pensacola, Florida
      • Temp to Perm
      • $15.00 per hour
      • 6:30 AM - 4:30 PM
      Responsible for the maintenance of inventory with the issuance and receipt of various parts, and supplies, while maintaining appropriate record keeping.Responsibilities:Perform a wide variety of clerical tasks.Perform data entry, typing, and filing of all related dataIssue material directly to aircraft job numbers or department accounts.Transfer material within various store areas. .Return material to inventory.Stock material.Control customer furnished materials.Process materials to be shipped, received and/or delivered:Maintain customer lockup.Package and document materials for shipment.Process incoming materials for distribution.Distribute picked material.Adhere to safe maintenance practices and keep a clean work area.Successfully complete any courses deemed necessary for each interdepartmental position (Stores, Tooling, Shipping, and Receiving, etc.) authorized by the department manager and/or Training Department.Perform any work that may be assigned by his or her supervisor.Ability to use the company intranet system, as needed. (ie, SQBMs, PPM, phone list)Working hours: 6:30 AM - 4:30 PMSkills:Good knowledge of office procedures and equipment including typewriters, copiers, calculators, fax machines, and microcomputers.Ability to prepare routine reportsMaintain specialized files and records.Education:High SchoolExperience:1-4 yearsQualifications:1 year experience with Forklift High school diploma or GED required.1 year experience preferred within a warehouse environment.1 year experience Microsoft Excel and Word Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for the maintenance of inventory with the issuance and receipt of various parts, and supplies, while maintaining appropriate record keeping.Responsibilities:Perform a wide variety of clerical tasks.Perform data entry, typing, and filing of all related dataIssue material directly to aircraft job numbers or department accounts.Transfer material within various store areas. .Return material to inventory.Stock material.Control customer furnished materials.Process materials to be shipped, received and/or delivered:Maintain customer lockup.Package and document materials for shipment.Process incoming materials for distribution.Distribute picked material.Adhere to safe maintenance practices and keep a clean work area.Successfully complete any courses deemed necessary for each interdepartmental position (Stores, Tooling, Shipping, and Receiving, etc.) authorized by the department manager and/or Training Department.Perform any work that may be assigned by his or her supervisor.Ability to use the company intranet system, as needed. (ie, SQBMs, PPM, phone list)Working hours: 6:30 AM - 4:30 PMSkills:Good knowledge of office procedures and equipment including typewriters, copiers, calculators, fax machines, and microcomputers.Ability to prepare routine reportsMaintain specialized files and records.Education:High SchoolExperience:1-4 yearsQualifications:1 year experience with Forklift High school diploma or GED required.1 year experience preferred within a warehouse environment.1 year experience Microsoft Excel and Word Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Naples, Florida
      • Permanent
      • $55,000 - $65,000 per year
      • 7:00 AM - 4:30 PM
      Spherion Staffing has teamed up with a well-established HVAC company in the Naples area to directly hire a Service Manager. The HVAC Service Manager will create a quality-of-service environment through accountability in the field and supported by the office. Providing continuity in the service & installation department through strong leadership, technical knowledge, and training to organize the team of field service/installation technicians to facilitate a strong service department.Responsibilities:- Responsible for supporting the company policies and procedures through technical support, training, call back resolution and working with dissatisfied customers and supporting the owners and company direction. - Assures that the organization and its mission, programs, and services are consistently presented in a strong, positive image. - Oversees and assist with the dispatching of service calls based on urgency, level of service required, contract status of customers, etc. - Communicates regularly with dispatch to ensure that personnel are being scheduled properly by skill level, efficiency and training requirements - Specifies and makes sure that required parts are ordered in timely fashion to ensure work deadlines are met - Prepare and manage HVAC replacement and retrofit projects for emergency and repair HVAC services. - Review maintenance inspections due with dispatcher and assigns mechanics to perform maintenance inspections weekly. - Review of all start up sheets, quality control forms and installation documents - Oversees assigned HVAC service vehicles, monitors vehicles to ensure they are being maintained and operated as required and used according to company policy - Monitors HVAC service vehicles to ensure they are in an acceptable condition to allow technicians to efficiently work out of the vehicle, and that an adequate inventory of parts and material are maintained - Manage and increase service technician performance numbers and metrics. - Supervises and directs the HVAC technicians to effectively perform the functions of equipment repair, installation, start-up, operation, and other duties as required to ensure customer satisfaction - Reviews technicians? work to ensure quality meets established standards, techniques and safety requirements; makes recommendations as requirements to improve quality and productivity - Bring forward challenges you have identified in the field to Operations Manager (OM) and provide solutions. - Implement and enforce new policies and procedures in the field with fellow technicians at the direction of OM. - Participate in the development of policies and procedures to improve the overall performance and function of the service department to ensure consistency, efficiency and quality control. - Required to be on-call and provide a hands on approach - Required to cover for technicians in the field as needed.Working hours: 7:00 AM - 4:30 PMSkills:Ability to communicate effectively, demonstrate leadership, and be service minded is essentialMaintain a spirit of enthusiasm and positive attitude in the office and interact and be accessible to co-workers.Directs training and indoctrination of workers to improve work performance and acquaint workers with company policies and procedures.Build good personal and professional image in the community and always be confident in customer relations.Recruits, interviews, hires and trains HVAC technicians as required to meet workload demands, and company or customer expectations and requirementsResponsible for HVAC technicians' performance appraisals, reviews and for setting improvement goals per company requirementsPositive attitude and committed to achieving company goalsAbility to Problem solve and be Responsive to provide field supervision and technical support to techniciansHonesty a
      Spherion Staffing has teamed up with a well-established HVAC company in the Naples area to directly hire a Service Manager. The HVAC Service Manager will create a quality-of-service environment through accountability in the field and supported by the office. Providing continuity in the service & installation department through strong leadership, technical knowledge, and training to organize the team of field service/installation technicians to facilitate a strong service department.Responsibilities:- Responsible for supporting the company policies and procedures through technical support, training, call back resolution and working with dissatisfied customers and supporting the owners and company direction. - Assures that the organization and its mission, programs, and services are consistently presented in a strong, positive image. - Oversees and assist with the dispatching of service calls based on urgency, level of service required, contract status of customers, etc. - Communicates regularly with dispatch to ensure that personnel are being scheduled properly by skill level, efficiency and training requirements - Specifies and makes sure that required parts are ordered in timely fashion to ensure work deadlines are met - Prepare and manage HVAC replacement and retrofit projects for emergency and repair HVAC services. - Review maintenance inspections due with dispatcher and assigns mechanics to perform maintenance inspections weekly. - Review of all start up sheets, quality control forms and installation documents - Oversees assigned HVAC service vehicles, monitors vehicles to ensure they are being maintained and operated as required and used according to company policy - Monitors HVAC service vehicles to ensure they are in an acceptable condition to allow technicians to efficiently work out of the vehicle, and that an adequate inventory of parts and material are maintained - Manage and increase service technician performance numbers and metrics. - Supervises and directs the HVAC technicians to effectively perform the functions of equipment repair, installation, start-up, operation, and other duties as required to ensure customer satisfaction - Reviews technicians? work to ensure quality meets established standards, techniques and safety requirements; makes recommendations as requirements to improve quality and productivity - Bring forward challenges you have identified in the field to Operations Manager (OM) and provide solutions. - Implement and enforce new policies and procedures in the field with fellow technicians at the direction of OM. - Participate in the development of policies and procedures to improve the overall performance and function of the service department to ensure consistency, efficiency and quality control. - Required to be on-call and provide a hands on approach - Required to cover for technicians in the field as needed.Working hours: 7:00 AM - 4:30 PMSkills:Ability to communicate effectively, demonstrate leadership, and be service minded is essentialMaintain a spirit of enthusiasm and positive attitude in the office and interact and be accessible to co-workers.Directs training and indoctrination of workers to improve work performance and acquaint workers with company policies and procedures.Build good personal and professional image in the community and always be confident in customer relations.Recruits, interviews, hires and trains HVAC technicians as required to meet workload demands, and company or customer expectations and requirementsResponsible for HVAC technicians' performance appraisals, reviews and for setting improvement goals per company requirementsPositive attitude and committed to achieving company goalsAbility to Problem solve and be Responsive to provide field supervision and technical support to techniciansHonesty a
      • Alachua, Florida
      • Permanent
      • $31.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion Gainesville, FL has a client looking for a Manufacturing Engineer to be responsible for production, project management and engineering functions within manufacturing. The position includes oversight and maintenance of the manufacturing environment, equipment, and processes with the responsibility of producing safe and effective products on time and within budget. Let's get to work.Direct Hire Opportunity! Alachua, FL Schedule: FT, M-F, 8am - 5pmSalary: $31/hrResponsibilities:- Motivate/mentor technical staff, supporting strategic planning, resource planning and continuous improvement- Work with development and manufacturing team to optimize systems and processes for the orderly, safe, and efficient flow of manufacturing processes- Provide clear, consistent, and measurable direction regarding timelines and deliverables- Ensure the quality and integrity of production and project management activities- Work with Marketing, Regulatory, and R&D in generating timelines and budgets for development projects- Other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:- Familiarity with Medical Device regulations 21CFR Part 820, ISO 13485:2016, EudraLex, etc.- Familiarity with the product realization cycle or a formal design controls process- Ability to support new product development in complex environmentsEducation:BachelorsExperience:1-4 yearsQualifications:- BA / BS degree and 5 years of industry experience in manufacturing of collagen products, tissue-based products and experience with medical devices or, MA / MS degree and 3 years of industry experience in manufacturing of collagen products, tissue-based products, and experience with medical devices- 1 year minimum management experience- Ability to work in a team environment, to establish production metrics - Knowledgeable in aseptic technique and production in clean room environments and cGMP concepts, establishment of production metrics, validation requirements, maintenance cycles, calibration programs, sterilization validation programs and dose audits, environmental monitoring reporting Are you ready to start your next career? Please click apply or call us at 352-378-2300 to inquire about our job opportunities.We offer Medical, Dental, 401(k) and bonuses! We pay weekly!Spherion Gainesville, FL is a drug free workplace.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Gainesville, FL has a client looking for a Manufacturing Engineer to be responsible for production, project management and engineering functions within manufacturing. The position includes oversight and maintenance of the manufacturing environment, equipment, and processes with the responsibility of producing safe and effective products on time and within budget. Let's get to work.Direct Hire Opportunity! Alachua, FL Schedule: FT, M-F, 8am - 5pmSalary: $31/hrResponsibilities:- Motivate/mentor technical staff, supporting strategic planning, resource planning and continuous improvement- Work with development and manufacturing team to optimize systems and processes for the orderly, safe, and efficient flow of manufacturing processes- Provide clear, consistent, and measurable direction regarding timelines and deliverables- Ensure the quality and integrity of production and project management activities- Work with Marketing, Regulatory, and R&D in generating timelines and budgets for development projects- Other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:- Familiarity with Medical Device regulations 21CFR Part 820, ISO 13485:2016, EudraLex, etc.- Familiarity with the product realization cycle or a formal design controls process- Ability to support new product development in complex environmentsEducation:BachelorsExperience:1-4 yearsQualifications:- BA / BS degree and 5 years of industry experience in manufacturing of collagen products, tissue-based products and experience with medical devices or, MA / MS degree and 3 years of industry experience in manufacturing of collagen products, tissue-based products, and experience with medical devices- 1 year minimum management experience- Ability to work in a team environment, to establish production metrics - Knowledgeable in aseptic technique and production in clean room environments and cGMP concepts, establishment of production metrics, validation requirements, maintenance cycles, calibration programs, sterilization validation programs and dose audits, environmental monitoring reporting Are you ready to start your next career? Please click apply or call us at 352-378-2300 to inquire about our job opportunities.We offer Medical, Dental, 401(k) and bonuses! We pay weekly!Spherion Gainesville, FL is a drug free workplace.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Cape Coral, Florida
      • Temp to Perm
      • $60,000 per year
      • 7:00 AM - 5:00 PM
      Spherion Staffing is seeking an experienced purchasing manager for a company located in Cape Coral, FL to handle the company's procurement activities! The purchasing manager's responsibilities include developing purchasing strategies, maintaining positive relationships with suppliers, coordinating with internal teams regarding their supply needs, and overseeing the purchasing team in their daily activities.Responsibilities:? Developing and implementing purchasing strategies.? Managing daily purchasing activities, supervising staff, and allocating tasks.-Managing supplier relations and negotiating contracts, prices, timelines, etc.-Maintaining the supplier database, purchase records, and related documentation.-Coordinating with inventory control to determine and manage inventory needs.-Managing the maintenance of office/manufacturing equipment and machinery.-Ensuring that all procured items meet the required quality standards andspecifications.Working hours: 7:00 AM - 5:00 PMSkills:-Excellent communication skills, both written and verbal.-Strong critical thinking and negotiation skills.-Strong planning and organizational skills.-Ability to work independently.Education:High SchoolExperience:1-4 yearsQualifications:-Degree in business administration or a related field.-Experience as a purchasing manager or in a similar position.-Deep knowledge of inventory and supply chain management.-Supervisory and management experience.-Proficiency in Microsoft Office/QuickBooks and purchasing software. Several ways to Apply-Apply in person MONDAY- FRIDAY between the hours of 9:00am-12:00pm or call our office to schedule an appointment!Address: 12500 World Plaza Ln bldg 40 suite 1, Fort Myers, FL 33907Apply on line www.spherionjobcentral.comEmail your resume by replying to this postCall our office at 239-939-9999 for more informationSpherion_gtwb_fortmyersSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is seeking an experienced purchasing manager for a company located in Cape Coral, FL to handle the company's procurement activities! The purchasing manager's responsibilities include developing purchasing strategies, maintaining positive relationships with suppliers, coordinating with internal teams regarding their supply needs, and overseeing the purchasing team in their daily activities.Responsibilities:? Developing and implementing purchasing strategies.? Managing daily purchasing activities, supervising staff, and allocating tasks.-Managing supplier relations and negotiating contracts, prices, timelines, etc.-Maintaining the supplier database, purchase records, and related documentation.-Coordinating with inventory control to determine and manage inventory needs.-Managing the maintenance of office/manufacturing equipment and machinery.-Ensuring that all procured items meet the required quality standards andspecifications.Working hours: 7:00 AM - 5:00 PMSkills:-Excellent communication skills, both written and verbal.-Strong critical thinking and negotiation skills.-Strong planning and organizational skills.-Ability to work independently.Education:High SchoolExperience:1-4 yearsQualifications:-Degree in business administration or a related field.-Experience as a purchasing manager or in a similar position.-Deep knowledge of inventory and supply chain management.-Supervisory and management experience.-Proficiency in Microsoft Office/QuickBooks and purchasing software. Several ways to Apply-Apply in person MONDAY- FRIDAY between the hours of 9:00am-12:00pm or call our office to schedule an appointment!Address: 12500 World Plaza Ln bldg 40 suite 1, Fort Myers, FL 33907Apply on line www.spherionjobcentral.comEmail your resume by replying to this postCall our office at 239-939-9999 for more informationSpherion_gtwb_fortmyersSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Spring Hill, Florida
      • Temp to Perm
      • $13.00 per hour
      • 6:00 AM - 4:30 PM
      Spherion Staffing & Recruiting has an immediate need for full-time ASSEMBLY PRODUCTION workers for a busy, fast-paced manufacturing warehouse in Pasco County.The ideal candidate should be self-motivated, looking for a long-term career, work well in independent and time sensitive situations, and demonstrate attention to detail. The ideal candidate will also be able to work in a fast paced environment and comfortable working in a non-temperature controlled work environment. Employees will also be responsible for performing repetitive work-station or line-assembly operations to mass produce components or parts necessary to the overall production process. Assemblers will aid in the fabrication, maintenance, and repair of products and parts as necessary.SCHEDULE: Mon-Fri 6am-4:30pm | $13.00 per hourSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreResponsibilities:- Perform repetitive assembly operations.- Experience with controls and instrumentation, manufacturing, quality control, tooling, safety management, demonstrated focus on quality, sound judgment.- Read, study and understand print schematics, assembly instructions, and bill of materials- Use templates and measurement tools- Verify specifications, position parts, sub-assembly, examine connections, and resolve assembly problems- Maintain inventory integrity, verify receipt of supplies, replace and replenish parts and consumable items- Meet production deadlines, follow routes, processes, policies and procedures- Complete preventative maintenance requirements, following instructions, troubleshooting malfunctions and calling for repairs when needed- inspect and verify accuracy of assembled product.- Prepare jobs for change in order.- Maintain documentation within production and quality logs ? Basic computer skills- Assist other teams in different work areas if needed.- Maintain a clean workspace.- Other duties may be assigned based on the needs of the business.Working hours: 6:00 AM - 4:30 PMSkills:- Pay close attention to detail and quality- Eye to Hand coordination- Ability to regularly lift and/or move up to 40 lbs.- Work in a fast paced environment- Ability to stand or walk for 10+ hours- Perform repetitive motion type tasks regularly- Willingness to learn and be part of an awesome team- Basic computer skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:- Experience with controls and instrumentation, manufacturing, quality control, or tooling- Demonstrated focus on quality and sound judgment- Basic computer skills- Ability to work in a team environment- Excellent history of attendance and communication- Good work ethic and positive attitude- Ability to work in a non-temperature controlled work environment Is this the job for you? Here are a few ways to apply: - Click the APPLY button on this job posting - Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 - Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!- Email resume to: naturecoast-fl@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, C
      Spherion Staffing & Recruiting has an immediate need for full-time ASSEMBLY PRODUCTION workers for a busy, fast-paced manufacturing warehouse in Pasco County.The ideal candidate should be self-motivated, looking for a long-term career, work well in independent and time sensitive situations, and demonstrate attention to detail. The ideal candidate will also be able to work in a fast paced environment and comfortable working in a non-temperature controlled work environment. Employees will also be responsible for performing repetitive work-station or line-assembly operations to mass produce components or parts necessary to the overall production process. Assemblers will aid in the fabrication, maintenance, and repair of products and parts as necessary.SCHEDULE: Mon-Fri 6am-4:30pm | $13.00 per hourSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreResponsibilities:- Perform repetitive assembly operations.- Experience with controls and instrumentation, manufacturing, quality control, tooling, safety management, demonstrated focus on quality, sound judgment.- Read, study and understand print schematics, assembly instructions, and bill of materials- Use templates and measurement tools- Verify specifications, position parts, sub-assembly, examine connections, and resolve assembly problems- Maintain inventory integrity, verify receipt of supplies, replace and replenish parts and consumable items- Meet production deadlines, follow routes, processes, policies and procedures- Complete preventative maintenance requirements, following instructions, troubleshooting malfunctions and calling for repairs when needed- inspect and verify accuracy of assembled product.- Prepare jobs for change in order.- Maintain documentation within production and quality logs ? Basic computer skills- Assist other teams in different work areas if needed.- Maintain a clean workspace.- Other duties may be assigned based on the needs of the business.Working hours: 6:00 AM - 4:30 PMSkills:- Pay close attention to detail and quality- Eye to Hand coordination- Ability to regularly lift and/or move up to 40 lbs.- Work in a fast paced environment- Ability to stand or walk for 10+ hours- Perform repetitive motion type tasks regularly- Willingness to learn and be part of an awesome team- Basic computer skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:- Experience with controls and instrumentation, manufacturing, quality control, or tooling- Demonstrated focus on quality and sound judgment- Basic computer skills- Ability to work in a team environment- Excellent history of attendance and communication- Good work ethic and positive attitude- Ability to work in a non-temperature controlled work environment Is this the job for you? Here are a few ways to apply: - Click the APPLY button on this job posting - Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 - Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!- Email resume to: naturecoast-fl@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, C
      • Brooksville, Florida
      • Permanent
      • $18.00 - $22.00 per hour
      • Various Shifts Available
      Are you looking for a career that challenges your mind, grows your skills, and contributes to a highly successful team? Spherion has an immediate need for a full-time Truss Plant Supervisor for a local manufacturer. This company is looking for a dedicated career minded individual looking to grow with the company that will facilitate the smooth flow of work through the plant by managing and coordinating production activities for the assigned shift including coordinating and assigning work to meet or exceed production goals.Responsibilities:- Evaluate efficiency and optimize productivity- Provide training for ongoing and new employees- Meet with management team daily to inform/ provide feedback on upcoming challenges and goals- Maintain a positive relationship with employees - Oversee and assist maintaining/ recording inventory- Rely on experience and judgment to plan and accomplish goalsWorking hours: Various Shifts AvailableSkills:- Safety - Provide leadership and guidance to team for the acceptance, maintenance, improvement and enforcement of safety initiatives- High Performance - Coach, encourage and reward team to consistently perform at a high level and with a sense of urgency- Integrity & Honesty - Demonstrate and enforce full compliance to rules, regulations and standards in a candid, truthful and ethical manner- Focus - Perform and lead team with constancy of purpose to meet strategic objectives- Teamwork - Encourage, leverage and coordinate efforts of team to work together to solve problems and sustain improvements to meet organizational goalsEducation:High SchoolExperience:1-4 yearsQualifications:- Bi-lingual/ Spanish and English preferred- Must have at least 2 years of management experience- 5+ years of experience in a truss plant manufacturing industry Here's how to apply: - Click the APPLY button on this job posting- Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601- Can't make it to the open house interviews? Give us a call at 352-796-6000 to schedule an interview- Email resume to: naturecoast-fl@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you looking for a career that challenges your mind, grows your skills, and contributes to a highly successful team? Spherion has an immediate need for a full-time Truss Plant Supervisor for a local manufacturer. This company is looking for a dedicated career minded individual looking to grow with the company that will facilitate the smooth flow of work through the plant by managing and coordinating production activities for the assigned shift including coordinating and assigning work to meet or exceed production goals.Responsibilities:- Evaluate efficiency and optimize productivity- Provide training for ongoing and new employees- Meet with management team daily to inform/ provide feedback on upcoming challenges and goals- Maintain a positive relationship with employees - Oversee and assist maintaining/ recording inventory- Rely on experience and judgment to plan and accomplish goalsWorking hours: Various Shifts AvailableSkills:- Safety - Provide leadership and guidance to team for the acceptance, maintenance, improvement and enforcement of safety initiatives- High Performance - Coach, encourage and reward team to consistently perform at a high level and with a sense of urgency- Integrity & Honesty - Demonstrate and enforce full compliance to rules, regulations and standards in a candid, truthful and ethical manner- Focus - Perform and lead team with constancy of purpose to meet strategic objectives- Teamwork - Encourage, leverage and coordinate efforts of team to work together to solve problems and sustain improvements to meet organizational goalsEducation:High SchoolExperience:1-4 yearsQualifications:- Bi-lingual/ Spanish and English preferred- Must have at least 2 years of management experience- 5+ years of experience in a truss plant manufacturing industry Here's how to apply: - Click the APPLY button on this job posting- Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601- Can't make it to the open house interviews? Give us a call at 352-796-6000 to schedule an interview- Email resume to: naturecoast-fl@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Odessa, Florida
      • Temp to Perm
      • $13.00 - $13.50 per hour
      • Various Shifts Available
      Spherion Staffing & Recruiting is currently seeking loyal, dedicated and proven Assembly Production workers for a busy, fast-paced electrical connector manufacturer. Responsibities include assembling parts in a manual, hand-assembly environment. This individual will be responsible for safety checks, logging orders into the database, and inspecting parts for quality.WORK SCHEDULE:2nd Shift: 2:30PM - 10:30PM | $13.00/Hr3rd Shift: 10:30PM - 6:30AM | $13.50/HrResponsibilities:-Able to accurately produce parts by operating all manual work cells and able to achieve a minimum productivity rate of 90%.-Perform quality checks, audits and inspections to ensure products are defect free. - Follow established process and procedures to achieve 0 quality defects.-Follow standard work procedures before, during and at the end of the shift as defined by the department guidelines.-Accurately transact job in database system.-Maintain all equipment and tools within the workstation as required by the preventative maintenance schedules.-Follow all safety procedures and facility safety guidelines.-Participates in 5S and safety activities.-Complete daily inspections for quality of assembled carts.Working hours: Various Shifts AvailableSkills:-Able to learn to use measuring instruments (calipers, measuring tape, rulers)-High level of attention to detail required-Excellent hand dexterity to handle small parts and hand toolsEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Excellent history of attendance and communication-Good work ethic and positive attitude-High School Diploma or equivalent-0-1 years experience in assembly environment required-Able to work well in a team environment -Must be able to sit or stand intermittently for up to 8 -12 hours daily-Must be able to bend, twist, push, pull, and lift products varying in weight, products 50lbs or less unassisted, products more than 50lbs assisted -Able to follow all safety standards and use PPE as assigned for each station-Ability to submit to full background check and drug screen Is this the job for you? Here are a few ways to apply: - Click the APPLY button on this job posting - Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 - Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!- Email resume to: naturecoast-fl@spherion.comSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing & Recruiting is currently seeking loyal, dedicated and proven Assembly Production workers for a busy, fast-paced electrical connector manufacturer. Responsibities include assembling parts in a manual, hand-assembly environment. This individual will be responsible for safety checks, logging orders into the database, and inspecting parts for quality.WORK SCHEDULE:2nd Shift: 2:30PM - 10:30PM | $13.00/Hr3rd Shift: 10:30PM - 6:30AM | $13.50/HrResponsibilities:-Able to accurately produce parts by operating all manual work cells and able to achieve a minimum productivity rate of 90%.-Perform quality checks, audits and inspections to ensure products are defect free. - Follow established process and procedures to achieve 0 quality defects.-Follow standard work procedures before, during and at the end of the shift as defined by the department guidelines.-Accurately transact job in database system.-Maintain all equipment and tools within the workstation as required by the preventative maintenance schedules.-Follow all safety procedures and facility safety guidelines.-Participates in 5S and safety activities.-Complete daily inspections for quality of assembled carts.Working hours: Various Shifts AvailableSkills:-Able to learn to use measuring instruments (calipers, measuring tape, rulers)-High level of attention to detail required-Excellent hand dexterity to handle small parts and hand toolsEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Excellent history of attendance and communication-Good work ethic and positive attitude-High School Diploma or equivalent-0-1 years experience in assembly environment required-Able to work well in a team environment -Must be able to sit or stand intermittently for up to 8 -12 hours daily-Must be able to bend, twist, push, pull, and lift products varying in weight, products 50lbs or less unassisted, products more than 50lbs assisted -Able to follow all safety standards and use PPE as assigned for each station-Ability to submit to full background check and drug screen Is this the job for you? Here are a few ways to apply: - Click the APPLY button on this job posting - Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 - Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!- Email resume to: naturecoast-fl@spherion.comSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Jacksonville, Florida
      • Permanent
      • $50,000 - $60,000 per year
      • 8:00 AM - 5:00 PM
      Spherion Jacksonville is looking for a Staff Accountant for their client in Downtown Jax. The Staff Accountant will support the financial management and operations through maintenance of accounting records and reports.Responsibilities:- Reconcile accounts, post to and balance general or subsidiary ledgers, processes payments, and electronic processes- Assist in the preparation of financial reports for the Credit Union, including supporting reports and schedules. This includes scheduling and ensuring timely production of weekly, monthly, quarterly and annual reporting internally to the Credit Union and externally to regulators and auditors- Assist in review of financial data to enhance general ledger to provide improved decision-making capabilities. Also responsible for making recommendations for accounting process efficiencies- Responsible for monitoring and maintaining disbursements, expenses and other payments- Contact other departments and/or outside agencies to resolve common problems- Responsible for compliance with Credit Union policies including the Bank Secrecy Act and Customer Identification ProgramWorking hours: 8:00 AM - 5:00 PMSkills:- Must be able to operate a 10 key calculator- Must possess computer skills - word processing, spreadsheets, and databases- Must also possess problem solving skills and ability to work independently with minimal supervisionEducation:AssociateExperience:1-4 yearsQualifications:- One to three years similar or related experience- A two year college degree or completion of a specialized course of study at a business or trade school or completion of a specialized and extensive in-house training or apprenticeship program Please call our office today if you're the right fit!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Jacksonville is looking for a Staff Accountant for their client in Downtown Jax. The Staff Accountant will support the financial management and operations through maintenance of accounting records and reports.Responsibilities:- Reconcile accounts, post to and balance general or subsidiary ledgers, processes payments, and electronic processes- Assist in the preparation of financial reports for the Credit Union, including supporting reports and schedules. This includes scheduling and ensuring timely production of weekly, monthly, quarterly and annual reporting internally to the Credit Union and externally to regulators and auditors- Assist in review of financial data to enhance general ledger to provide improved decision-making capabilities. Also responsible for making recommendations for accounting process efficiencies- Responsible for monitoring and maintaining disbursements, expenses and other payments- Contact other departments and/or outside agencies to resolve common problems- Responsible for compliance with Credit Union policies including the Bank Secrecy Act and Customer Identification ProgramWorking hours: 8:00 AM - 5:00 PMSkills:- Must be able to operate a 10 key calculator- Must possess computer skills - word processing, spreadsheets, and databases- Must also possess problem solving skills and ability to work independently with minimal supervisionEducation:AssociateExperience:1-4 yearsQualifications:- One to three years similar or related experience- A two year college degree or completion of a specialized course of study at a business or trade school or completion of a specialized and extensive in-house training or apprenticeship program Please call our office today if you're the right fit!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Jacksonville, Florida
      • Permanent
      • $65,000 per year
      • 8:00 AM - 5:00 PM
      Spherion Jacksonville is looking for a Senior Accountant for their client in Downtown Jax. The Staff Accountant will support the financial management and operations through maintenance of accounting records and reports, and will perform these duties under limited supervision.Responsibilities:- Prepares financial reports for the credit union, namely the Call Report, required federal and state reporting, Board Reports and supporting schedules- Analyze financial statements for discrepancies and work with Accounting Manager to ensure accurate and complete Board Reports- Review financial data to enhance general ledger in order to provide improved decision-making capabilities- Develops new financial reports as directed- Coordinate activities of the accounting department as directed- Posts to and reconciles general ledger accounts as assigned- Make recommendations for improvement in accounting process efficiencies- Contacts other departments and/or outside agencies to resolve common problems- Responsible for compliance with all credit union policies including the Bank Secrecy Act and Customer Identification PolicyWorking hours: 8:00 AM - 5:00 PMSkills:- Must be able to operate a 10 key calculator by touch- Excellent computer skills--word processing, spreadsheets and databases- Excellent problem-solving skills are a must- Ability to work independently with minimal supervisionEducation:BachelorsExperience:1-4 yearsQualifications:- One year to three years of similar or related experience- A bachelor's degree, or achievement of formal certifications recognized in the industry as equivalent to a bachelor's degree (e.g. information technology certifications in lieu of a degree) Call our office today if this is the right fit for you!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Jacksonville is looking for a Senior Accountant for their client in Downtown Jax. The Staff Accountant will support the financial management and operations through maintenance of accounting records and reports, and will perform these duties under limited supervision.Responsibilities:- Prepares financial reports for the credit union, namely the Call Report, required federal and state reporting, Board Reports and supporting schedules- Analyze financial statements for discrepancies and work with Accounting Manager to ensure accurate and complete Board Reports- Review financial data to enhance general ledger in order to provide improved decision-making capabilities- Develops new financial reports as directed- Coordinate activities of the accounting department as directed- Posts to and reconciles general ledger accounts as assigned- Make recommendations for improvement in accounting process efficiencies- Contacts other departments and/or outside agencies to resolve common problems- Responsible for compliance with all credit union policies including the Bank Secrecy Act and Customer Identification PolicyWorking hours: 8:00 AM - 5:00 PMSkills:- Must be able to operate a 10 key calculator by touch- Excellent computer skills--word processing, spreadsheets and databases- Excellent problem-solving skills are a must- Ability to work independently with minimal supervisionEducation:BachelorsExperience:1-4 yearsQualifications:- One year to three years of similar or related experience- A bachelor's degree, or achievement of formal certifications recognized in the industry as equivalent to a bachelor's degree (e.g. information technology certifications in lieu of a degree) Call our office today if this is the right fit for you!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Howey In The Hills, Florida
      • Temp to Perm
      • $15.00 - $15.50 per hour
      • 3:00 PM - 11:00 PM
      Spherion Staffing Leesburg, FL has multiple openings for experienced forklift operators for a busy manufacturing facility in Howey in the Hills.The facility is open 7 days a week and the schedule may vary!Various shifts available: base pay is $15.00/hr plus shift differential for forklift operators. Mandatory overtime required as needed for production.1st Shift 7:00 AM - 3:00 PM Training Shift2nd Shift 3:00 PM - 11:00 PMResponsibilities:Under direct supervision, responsible for the receipt and shipment of incoming materials, supplies, and products. Receives goods, verifies items against the record of shipment, and inspects condition. Gathers, verifies, and packs items for shipment according to specifications and the transportation method used. Records received and shipped items according to established procedures. Supervising processes and procedures in receiving and shipping department. Ensures that goods are verified against records of shipment. Oversees the inspection of goods received. Supervises the maintenance of records of damaged or defective items and discrepancies in quantities and weights, and records time, date, quantity, source, and destination of materials received or shipped.Working hours: 3:00 PM - 11:00 PMSkills:SKILLS AND REQUIREMENT:Must be able to work in a fast paced, high volume environment, and have a strong attention to detail. Must be a proactive ?self starter? who can work well without supervision. Requires minimum 1 to 3 years? experience in shipping and receiving in a manufacturing environment. Must have the ability to stand for long periods of time. Requires High school education. Associates degree is strongly preferred.Education:No Degree RequiredExperience:1-4 yearsQualifications:PHYSICAL REQUIREMENTS Must have ability to use hands and fingers to complete tasks quickly and efficiently. In addition, must have the ability to move freely throughout the facility without physical limitation, and capacity to stand for long periods of time. Must be able to lift up to 50 lbs., and have the ability to bend, stoop and reach. Apply today or call/text our office at 352-728-8787.Spherion Staffing1710 Citrus Blvd., Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing Leesburg, FL has multiple openings for experienced forklift operators for a busy manufacturing facility in Howey in the Hills.The facility is open 7 days a week and the schedule may vary!Various shifts available: base pay is $15.00/hr plus shift differential for forklift operators. Mandatory overtime required as needed for production.1st Shift 7:00 AM - 3:00 PM Training Shift2nd Shift 3:00 PM - 11:00 PMResponsibilities:Under direct supervision, responsible for the receipt and shipment of incoming materials, supplies, and products. Receives goods, verifies items against the record of shipment, and inspects condition. Gathers, verifies, and packs items for shipment according to specifications and the transportation method used. Records received and shipped items according to established procedures. Supervising processes and procedures in receiving and shipping department. Ensures that goods are verified against records of shipment. Oversees the inspection of goods received. Supervises the maintenance of records of damaged or defective items and discrepancies in quantities and weights, and records time, date, quantity, source, and destination of materials received or shipped.Working hours: 3:00 PM - 11:00 PMSkills:SKILLS AND REQUIREMENT:Must be able to work in a fast paced, high volume environment, and have a strong attention to detail. Must be a proactive ?self starter? who can work well without supervision. Requires minimum 1 to 3 years? experience in shipping and receiving in a manufacturing environment. Must have the ability to stand for long periods of time. Requires High school education. Associates degree is strongly preferred.Education:No Degree RequiredExperience:1-4 yearsQualifications:PHYSICAL REQUIREMENTS Must have ability to use hands and fingers to complete tasks quickly and efficiently. In addition, must have the ability to move freely throughout the facility without physical limitation, and capacity to stand for long periods of time. Must be able to lift up to 50 lbs., and have the ability to bend, stoop and reach. Apply today or call/text our office at 352-728-8787.Spherion Staffing1710 Citrus Blvd., Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Cantonment, Florida
      • Permanent
      • $19.00 per hour
      • 6:00 AM - 6:00 PM
      We are hiring for a technician for the Quality Assurance Department (Lab) for our client in Cantonment! This position will train full time over the course of two weeks during days, and after training you will work a 2 week rotating swing shift. This schedule requires working 2 weeks on days and 2 weeks on nights with built in overtime in your schedule. Position pays $19/hour.Responsibilities:-Effective communicator that shows a concern for accuracy.-Able to handle multiple tasks-Good decision making skills-Computer skills-Conduct physical testing on all in process and finished product grades according to TPE methods and Lab procedures.-Assist in quality audits and round robin testing to insure compliance within the Santoprene organization.-Review, update and follow all Quality Assurance procedures.-Provide special testing for support groups to determine product quality on special production runs.-Maintain laboratory/ work area housekeeping and follow safe work habits.-Provide finished product testing for outside tollers.-Perform regular maintenance of lab equipment; i.e. pulling screws and drilling dies.-Coordinate special testing at NAMSA or other outside labs.Working hours: 6:00 AM - 6:00 PMSkills:-Good decision making skills-Computer skills-Knowledge of proper equipment operation and troubleshooting skillsEducation:High SchoolExperience:1-4 yearsQualifications:-Working understanding of basic statistical methods-Effective communicator that shows a concern for accuracy.-Able to handle multiple tasks-Good decision making skills-Computer skills-Maintain compliance with all required site safety training.-Maintain technical competence with all TPE test methods-Ability to compute mathematical formulas of various types with use of decimals, fractions and percentages.-Knowledge of proper equipment operation and troubleshooting skills Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are hiring for a technician for the Quality Assurance Department (Lab) for our client in Cantonment! This position will train full time over the course of two weeks during days, and after training you will work a 2 week rotating swing shift. This schedule requires working 2 weeks on days and 2 weeks on nights with built in overtime in your schedule. Position pays $19/hour.Responsibilities:-Effective communicator that shows a concern for accuracy.-Able to handle multiple tasks-Good decision making skills-Computer skills-Conduct physical testing on all in process and finished product grades according to TPE methods and Lab procedures.-Assist in quality audits and round robin testing to insure compliance within the Santoprene organization.-Review, update and follow all Quality Assurance procedures.-Provide special testing for support groups to determine product quality on special production runs.-Maintain laboratory/ work area housekeeping and follow safe work habits.-Provide finished product testing for outside tollers.-Perform regular maintenance of lab equipment; i.e. pulling screws and drilling dies.-Coordinate special testing at NAMSA or other outside labs.Working hours: 6:00 AM - 6:00 PMSkills:-Good decision making skills-Computer skills-Knowledge of proper equipment operation and troubleshooting skillsEducation:High SchoolExperience:1-4 yearsQualifications:-Working understanding of basic statistical methods-Effective communicator that shows a concern for accuracy.-Able to handle multiple tasks-Good decision making skills-Computer skills-Maintain compliance with all required site safety training.-Maintain technical competence with all TPE test methods-Ability to compute mathematical formulas of various types with use of decimals, fractions and percentages.-Knowledge of proper equipment operation and troubleshooting skills Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Pensacola, Florida
      • Temp to Perm
      • $15.00 per hour
      • 4:30 PM - 1:30 AM
      Our client is looking for a Tool Room Attendant to join their team. Position is Full-Time and a Temp-Hire Position. Pay starts at $15/hr.Responsibilities:1. Perform a wide variety of routine clerical tasks:- Perform data entry of all related tooling.2. Process tooling transactions:- Issue tooling directly to aircraft job numbers or department accounts.- Transfer tooling to various designated tooling areas throughout facility.- Return tooling to inventory.- Stock and inventory all tooling daily.- Control customer furnished tooling.3. Adhere to safe maintenance practices and maintaining a clean work area.4. Maintain quality control of respirators.5. Conduct tooling repair, including lubrication of tooling.6. Preparation of special tooling containers (i.e. boxes)7. Build tooling racks and shelving units when tasked.8. Able to identify basic handtools.9. Perform any work that may be assigned by his/her supervisor.Working hours: 4:30 PM - 1:30 AMSkills:A high level of interpersonal skills at the window and on the floor of the tool room is required to maintain an effective relationship with management and co-workers.Requires easy mobility around storage facilities and the dexterity to remove and replace tooling parts in upper and lower storage bins. Working environment requires standing 90% of the workday on hard surfaces. Must be able to lift 50lbs. Must be able to work in environments containing dust and paint.Education:High SchoolExperience:0-1 yearsQualifications:Good knowledge of office procedures and equipment, including copiers, fax machines, and computersAbility to prepare routine reports and maintain specialized files and records.Tool room personnel typically work in a fast paced environment with equipment ranging from hand tools to heavy equipment. Personnel may be assigned to one of several tool rooms..Under immediate direction. Performs assignment after receiving detailed instructions as to methods, procedures, and desired end results. Little room for deviation. Use of head phones, blue tooth, or personal cell phones during worktime is prohibited. Apply Today!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client is looking for a Tool Room Attendant to join their team. Position is Full-Time and a Temp-Hire Position. Pay starts at $15/hr.Responsibilities:1. Perform a wide variety of routine clerical tasks:- Perform data entry of all related tooling.2. Process tooling transactions:- Issue tooling directly to aircraft job numbers or department accounts.- Transfer tooling to various designated tooling areas throughout facility.- Return tooling to inventory.- Stock and inventory all tooling daily.- Control customer furnished tooling.3. Adhere to safe maintenance practices and maintaining a clean work area.4. Maintain quality control of respirators.5. Conduct tooling repair, including lubrication of tooling.6. Preparation of special tooling containers (i.e. boxes)7. Build tooling racks and shelving units when tasked.8. Able to identify basic handtools.9. Perform any work that may be assigned by his/her supervisor.Working hours: 4:30 PM - 1:30 AMSkills:A high level of interpersonal skills at the window and on the floor of the tool room is required to maintain an effective relationship with management and co-workers.Requires easy mobility around storage facilities and the dexterity to remove and replace tooling parts in upper and lower storage bins. Working environment requires standing 90% of the workday on hard surfaces. Must be able to lift 50lbs. Must be able to work in environments containing dust and paint.Education:High SchoolExperience:0-1 yearsQualifications:Good knowledge of office procedures and equipment, including copiers, fax machines, and computersAbility to prepare routine reports and maintain specialized files and records.Tool room personnel typically work in a fast paced environment with equipment ranging from hand tools to heavy equipment. Personnel may be assigned to one of several tool rooms..Under immediate direction. Performs assignment after receiving detailed instructions as to methods, procedures, and desired end results. Little room for deviation. Use of head phones, blue tooth, or personal cell phones during worktime is prohibited. Apply Today!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Winter Haven, Florida
      • Temp to Perm
      • $15.00 per hour
      • 8:00 AM - 5:00 PM
      Local manufacturing company looking to fill 3rd shift extrusion and injection molding operators. Schedule: Monday - Friday 12am - 8amResponsibilities:- Start up and shut down of machines- Operate all auxiliary equipment (dryer, loader, grinder, water tower)- Read and interpret specifications to determine setup and prescribed temperature and time settings- Adjusts machine settings to complete tasks accurately, according to specifications, and in a timely fashion- Troubleshoot and evaluate machines and perform minor repairs and maintenance- Trim parts by cleanly removing gate and any flash- Neatly Count, pack, label and organize finished parts to stock movement- Record and documents work activities, production levels, and product inspection results per specified company guidelines- Handle raw material (drying, mixing, filling hoppers)- Grind spurs and other parts for later use- Complete understanding of purging process for both color changes and shutdownWorking hours: 8:00 AM - 5:00 PMSkills:-Prior machine operating experience-Must be able to stand for long periods of time.-Must be able to lift 50 pounds regularly.-Subjected to a hot work environment during warmer months.Education:High SchoolExperience:1-4 yearsQualifications:-High school or equivalent-Injection Molding Machine: 1 year experience preferred Urgently hiring! Call or text today to set up an interivew: 863-667-0800.We offer Open House- On the spot application and interviews on the following days:Tuesday - Thursday9:30am - 11:30am1:00pm - 3:00pmWant to skip the line- call to schedule an interview!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Local manufacturing company looking to fill 3rd shift extrusion and injection molding operators. Schedule: Monday - Friday 12am - 8amResponsibilities:- Start up and shut down of machines- Operate all auxiliary equipment (dryer, loader, grinder, water tower)- Read and interpret specifications to determine setup and prescribed temperature and time settings- Adjusts machine settings to complete tasks accurately, according to specifications, and in a timely fashion- Troubleshoot and evaluate machines and perform minor repairs and maintenance- Trim parts by cleanly removing gate and any flash- Neatly Count, pack, label and organize finished parts to stock movement- Record and documents work activities, production levels, and product inspection results per specified company guidelines- Handle raw material (drying, mixing, filling hoppers)- Grind spurs and other parts for later use- Complete understanding of purging process for both color changes and shutdownWorking hours: 8:00 AM - 5:00 PMSkills:-Prior machine operating experience-Must be able to stand for long periods of time.-Must be able to lift 50 pounds regularly.-Subjected to a hot work environment during warmer months.Education:High SchoolExperience:1-4 yearsQualifications:-High school or equivalent-Injection Molding Machine: 1 year experience preferred Urgently hiring! Call or text today to set up an interivew: 863-667-0800.We offer Open House- On the spot application and interviews on the following days:Tuesday - Thursday9:30am - 11:30am1:00pm - 3:00pmWant to skip the line- call to schedule an interview!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 34 jobs seen

    Thank you for subscribing to your personalized job alerts.

    Explore over 9 jobs in Florida

    It looks like you want to switch your language. This will reset your filters on your current job search.