Thank you for subscribing to your personalized job alerts.

    37 jobs found for Manufacturing in Northwood, Iowa

    Filter2
    Clear all
      • Northwood, Iowa
      • Permanent
      • $18.11 - $22.05 per hour
      • 6:00 AM - 4:30 PM
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Northwood, Iowa
      • Permanent
      • $18.11 - $22.05 per hour
      • 6:00 AM - 4:30 PM
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Northwood, Iowa
      • Permanent
      • $18.11 - $22.05 per hour
      • 6:00 AM - 4:30 PM
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 6:00 AM - 3:10 PM
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:?Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 6:00 AM - 3:10 PMSkills:Reliable and dependabilityEducation:High SchoolExperience:0-1 yearsQualifications:?High School Diploma or equivalent?Required to pass a pre-employment Drug Screen and Background. Get your foot in the door at this amazing company! Apply NOW! DIRECT HIRE position with an Employee Owned Company that takes great care of their employees, and has much growth opportunity! The Benefit Package is OUTSTANDING! Medical, HRA with 100% Employer Contribution, FREE CLINIC, L/T & S/Term Disability & Life Insurance, PTO, Tuition Reimbursement, 401K and ESOP, and so much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:?Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 6:00 AM - 3:10 PMSkills:Reliable and dependabilityEducation:High SchoolExperience:0-1 yearsQualifications:?High School Diploma or equivalent?Required to pass a pre-employment Drug Screen and Background. Get your foot in the door at this amazing company! Apply NOW! DIRECT HIRE position with an Employee Owned Company that takes great care of their employees, and has much growth opportunity! The Benefit Package is OUTSTANDING! Medical, HRA with 100% Employer Contribution, FREE CLINIC, L/T & S/Term Disability & Life Insurance, PTO, Tuition Reimbursement, 401K and ESOP, and so much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.25 per hour
      • 2:00 PM - 10:30 PM
      FLAVORING OPERATOR (Agglomeration) Job Summary: Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 2:00 PM - 10:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.25, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      FLAVORING OPERATOR (Agglomeration) Job Summary: Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 2:00 PM - 10:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.25, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 3:00 PM - 1:15 AM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 3:00 PM - 1:15 AMSkills:--Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.--Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.--Fabricate components from blueprints and verbal instructions.--Perform assignments in accordance with written quality procedures.--Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.--Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! ?Medical & ST Disability?HRA ? 100% Employer Contribution, helps pay medical deductible?Free Clinic ? For employees and dependents?LT Disability & Life Insurance ? 100% Employer Paid
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 3:00 PM - 1:15 AMSkills:--Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.--Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.--Fabricate components from blueprints and verbal instructions.--Perform assignments in accordance with written quality procedures.--Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.--Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! ?Medical & ST Disability?HRA ? 100% Employer Contribution, helps pay medical deductible?Free Clinic ? For employees and dependents?LT Disability & Life Insurance ? 100% Employer Paid
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Tends machine that performs packaging operation.Responsibilities:Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 6:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $18.50/hr, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Tends machine that performs packaging operation.Responsibilities:Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 6:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $18.50/hr, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $20.00 per hour
      • 3:00 PM - 1:15 AM
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 1:15 AMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 1:15 AMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:30 PM
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 3:00 PM - 11:00 PM
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:00 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:00 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 9:00 PM - 6:25 AM
      Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 9:00 PM - 6:25 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.50, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 9:00 PM - 6:25 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.50, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:CLASSIFICATIONS:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 7:00 AM - 3:15 PMSkills:-Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.-Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.-Fabricate components from blueprints and verbal instructions.-Perform assignments in accordance with written quality procedures.-Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.-Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! Medical & ST DisabilityHRA ? 100% Employer Contribution, helps pay medical deductibleFree Clinic ? For employees and dependentsLT Disability & Life Insurance ? 100% Employer Pai
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:CLASSIFICATIONS:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 7:00 AM - 3:15 PMSkills:-Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.-Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.-Fabricate components from blueprints and verbal instructions.-Perform assignments in accordance with written quality procedures.-Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.-Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! Medical & ST DisabilityHRA ? 100% Employer Contribution, helps pay medical deductibleFree Clinic ? For employees and dependentsLT Disability & Life Insurance ? 100% Employer Pai
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 2:00 PM - 10:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Other duties as assignedWorking hours: 2:00 PM - 10:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:Required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesPHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands or fingers, and talk and hear, reach, bend, stoop, stand for long periods of time, reach over head, and lifting up to 50 lbs. ** DIRECT HIRE ** Great Benefits, Incl: Medical & Short-Term Disability- Low premium rates!HRA 100% Emplo
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Other duties as assignedWorking hours: 2:00 PM - 10:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:Required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesPHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands or fingers, and talk and hear, reach, bend, stoop, stand for long periods of time, reach over head, and lifting up to 50 lbs. ** DIRECT HIRE ** Great Benefits, Incl: Medical & Short-Term Disability- Low premium rates!HRA 100% Emplo
      • Albert Lea, Minnesota
      • Temporary
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $20.00 per hour
      • 6:00 AM - 2:30 PM
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 6:00 AM - 2:30 PMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Qualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screenCall to Action:Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 6:00 AM - 2:30 PMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Qualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screenCall to Action:Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Education:High SchoolExperience:1-4 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! Great benefit package, including: Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 11:00 PM - 7:30 AM
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:MastersExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:MastersExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $40,000 - $50,000 per year
      • 8:00 AM - 5:00 PM
      Logistics Coordinator (Import/Export Shipments and Inventory) for a company that specializes in providing customized ingredient systems. They offer Nutrient Premixes and Spray-dried formulations for the Fortification of food, as well as innovative Antioxidant Systems for the protection of recipes in human nutrition, animal nutrition, and personal care.Responsibilities:-Answer incoming calls, greet clients at the door, and other general clerical duties.-Assess and resolve issues relating to transportation, customer inquiries, import and export, and inventory. -Manage customer PO?s and input into ERP system (Quickbooks)-Create Customs paperwork for export shipments.-Work with customers, suppliers and freight companies to arrange for shipment/delivery.-Obtain and send appropriate paperwork with each shipment via driver and via email direct to the customer.-Create daily UPS, DHL, FedEx shipments with correct packaging, labeling and paperwork.-Obtain samples per customer request and ship in a timely manner, communicating tracking info with the customer.-Run daily shipping reports and update Quality and Shipping department on any changes.-Calculate daily production reconciliations, build assemblies for finished goods and adjust raw material and finished goods inventories accordingly.-Will be cross trained to fill in as needed for other office personnel.Working hours: 8:00 AM - 5:00 PMSkills:--Effective Communication (English), including written, verbal, and interpersonal communication.--Quick critical thinking and problem-solving skills--Excellent customer service/relations skills--Organization and time management skills--Ability to work in a fast paced, ever changing Team environment.--Proficient in MS Office tools including, Excel, Word, Power Point, Teams and Outlook.Education:No Degree RequiredExperience:1-4 yearsQualifications:-Required experience with IMPORT/EXPORT shipments and associated paperwork.-Required Inventory management skills-Experience with shipping Hazardous goods a plus -Experience with Quickbooks a plus This company has corporate backing that continually invests in growth and state of the art equipment?.but a ?locally owned family atmosphere? that cares about their employees. Where you?re not just a number, you?re part of the family. This is a Direct Hire position with an impressive Benefits Package including great Family Health Insurance that is paid 70% by the company for the employee, 100% for Spouse, and 70% for children. 100% Dental, ST/LT Disability, Company Match 401K, PTO and much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Logistics Coordinator (Import/Export Shipments and Inventory) for a company that specializes in providing customized ingredient systems. They offer Nutrient Premixes and Spray-dried formulations for the Fortification of food, as well as innovative Antioxidant Systems for the protection of recipes in human nutrition, animal nutrition, and personal care.Responsibilities:-Answer incoming calls, greet clients at the door, and other general clerical duties.-Assess and resolve issues relating to transportation, customer inquiries, import and export, and inventory. -Manage customer PO?s and input into ERP system (Quickbooks)-Create Customs paperwork for export shipments.-Work with customers, suppliers and freight companies to arrange for shipment/delivery.-Obtain and send appropriate paperwork with each shipment via driver and via email direct to the customer.-Create daily UPS, DHL, FedEx shipments with correct packaging, labeling and paperwork.-Obtain samples per customer request and ship in a timely manner, communicating tracking info with the customer.-Run daily shipping reports and update Quality and Shipping department on any changes.-Calculate daily production reconciliations, build assemblies for finished goods and adjust raw material and finished goods inventories accordingly.-Will be cross trained to fill in as needed for other office personnel.Working hours: 8:00 AM - 5:00 PMSkills:--Effective Communication (English), including written, verbal, and interpersonal communication.--Quick critical thinking and problem-solving skills--Excellent customer service/relations skills--Organization and time management skills--Ability to work in a fast paced, ever changing Team environment.--Proficient in MS Office tools including, Excel, Word, Power Point, Teams and Outlook.Education:No Degree RequiredExperience:1-4 yearsQualifications:-Required experience with IMPORT/EXPORT shipments and associated paperwork.-Required Inventory management skills-Experience with shipping Hazardous goods a plus -Experience with Quickbooks a plus This company has corporate backing that continually invests in growth and state of the art equipment?.but a ?locally owned family atmosphere? that cares about their employees. Where you?re not just a number, you?re part of the family. This is a Direct Hire position with an impressive Benefits Package including great Family Health Insurance that is paid 70% by the company for the employee, 100% for Spouse, and 70% for children. 100% Dental, ST/LT Disability, Company Match 401K, PTO and much more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temporary
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $20.00 per hour
      • 7:00 AM - 3:30 PM
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 11:00 PM - 7:30 AM
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 7:00 AM - 4:00 PM
      The purpose of this position is to ensure work site set up, performs basic to routine window, door and gutter installations and removal, performs work site tear down and clean up of the entire job site in accordance with guidelines.Responsibilities:Duties/Responsibilities:Effectively prepares the job site for set up and tear downInstalls products in accordance with Home Solutions standards and processes Collaborates with the Lead Installer to provide Signature Service on each job sitePlans continual self-learning and development of skillsAssists in meeting or exceeding customer satisfaction and revenue dollars per periodAdheres to proper safety techniquesBuilds and sustains positive relationships with coworkers and customersDemonstrates self-leadership and personal accountabilityDemonstrates responsible attendance, punctuality and work place flexibilityContinually improves processesPerforms other duties as assigned.Working hours: 7:00 AM - 4:00 PMSkills:-Must have a valid driver?s license-Able to communicate with peers and homeowners-Able to organize tasks and jobs requirements-Proficient in the use of tools and equipmentEducation:MastersExperience:0-1 yearsQualifications:High school diploma or equivalent combination of education and experienceTrade school diploma/certificate desiredTwo years general carpentry experience desiredPhysical Requirements: Constantly positions self to remove/install products at various levelsOccasionally ascends/descends a ladder to install productsOccasionally moves windows/doors and equipment weighing up to 75 pounds Occasionally operates power toolsConstantly works in outdoor weather conditions Work for a wonderful locally owned business continually expanding! Direct Hire positionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The purpose of this position is to ensure work site set up, performs basic to routine window, door and gutter installations and removal, performs work site tear down and clean up of the entire job site in accordance with guidelines.Responsibilities:Duties/Responsibilities:Effectively prepares the job site for set up and tear downInstalls products in accordance with Home Solutions standards and processes Collaborates with the Lead Installer to provide Signature Service on each job sitePlans continual self-learning and development of skillsAssists in meeting or exceeding customer satisfaction and revenue dollars per periodAdheres to proper safety techniquesBuilds and sustains positive relationships with coworkers and customersDemonstrates self-leadership and personal accountabilityDemonstrates responsible attendance, punctuality and work place flexibilityContinually improves processesPerforms other duties as assigned.Working hours: 7:00 AM - 4:00 PMSkills:-Must have a valid driver?s license-Able to communicate with peers and homeowners-Able to organize tasks and jobs requirements-Proficient in the use of tools and equipmentEducation:MastersExperience:0-1 yearsQualifications:High school diploma or equivalent combination of education and experienceTrade school diploma/certificate desiredTwo years general carpentry experience desiredPhysical Requirements: Constantly positions self to remove/install products at various levelsOccasionally ascends/descends a ladder to install productsOccasionally moves windows/doors and equipment weighing up to 75 pounds Occasionally operates power toolsConstantly works in outdoor weather conditions Work for a wonderful locally owned business continually expanding! Direct Hire positionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $14.00 - $17.00 per hour
      • 7:00 AM - 4:00 PM
      The purpose of this position is to proficiently and precisely stain wood for window and door projects. Work is performed indoors in a controlled temperature environment. Additional duties as assigned to complete projects.Responsibilities:Effectively sanding, prepping, staining, seal and top coating Assemble and dissemble windows and doors to complete stain process Load and unload windows and doors Measure and cut wood to specifics for jobsWorking hours: 7:00 AM - 4:00 PMSkills:Must have a valid drivers license Attention to detail and time management skills Able to organize tasks and jobs requirements Proficient in stainingEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalent combination of education and experience Wood staining experience preferredPhysical Requirements: Occasionally ascends/descends a ladder Occasionally moves windows/doors and equipment weighing up to 75 pounds Occasionally operates power tools Constantly works indoors Direct Hire positions with a great company continually expanding! Work indors in a temperature controlled environment!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The purpose of this position is to proficiently and precisely stain wood for window and door projects. Work is performed indoors in a controlled temperature environment. Additional duties as assigned to complete projects.Responsibilities:Effectively sanding, prepping, staining, seal and top coating Assemble and dissemble windows and doors to complete stain process Load and unload windows and doors Measure and cut wood to specifics for jobsWorking hours: 7:00 AM - 4:00 PMSkills:Must have a valid drivers license Attention to detail and time management skills Able to organize tasks and jobs requirements Proficient in stainingEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalent combination of education and experience Wood staining experience preferredPhysical Requirements: Occasionally ascends/descends a ladder Occasionally moves windows/doors and equipment weighing up to 75 pounds Occasionally operates power tools Constantly works indoors Direct Hire positions with a great company continually expanding! Work indors in a temperature controlled environment!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $17.50 - $19.00 per hour
      • 6:30 AM - 4:00 PM
      Laborers assist welders in all aspects of fabrication and assembly in shop and field site work areas. And assist painters and bead blasters in prepping/coating projects.Responsibilities:Operate all hand/automated tools including tape measure, steel square, wrenches, ratchets, grinders, chop saws, come-a-longs, jacks, chain hoists, clamps, welding dogs & pad-eyes, etc.Lay out, position, and secure parts and assemblies using hoists, pry bars, wrenches, hammer, and wedges as directed.Remove rough spots, slag, etc. from work piece, using portable grinder, wire brush, hand file, bench grinder, wire wheel, etc.Lift, move, transport steel parts using hydraulic lifts, plate clamps, chain hoists, dollies and hand carts.Observe and follows all company safety rules and regulations.Clean and maintain an orderly work area.Work well with others to ensure quality of work while maintaining scheduling demands.Performs other miscellaneous tasks as directed by management.Working hours: 6:30 AM - 4:00 PMSkills:Ability to communicate both verbally as well as through written communication.Reliable and punctual.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to lift 50 pounds.Must possess adequate sight, hearing and use of limbs for all aspects of job.Able to work for periods of time while kneeling, crouching, crawling, climbing steps as well as the ability to work from a ladder.Ability to pass a drug and alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant Company 30%, empl 70%. To offset the deductible?company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Laborers assist welders in all aspects of fabrication and assembly in shop and field site work areas. And assist painters and bead blasters in prepping/coating projects.Responsibilities:Operate all hand/automated tools including tape measure, steel square, wrenches, ratchets, grinders, chop saws, come-a-longs, jacks, chain hoists, clamps, welding dogs & pad-eyes, etc.Lay out, position, and secure parts and assemblies using hoists, pry bars, wrenches, hammer, and wedges as directed.Remove rough spots, slag, etc. from work piece, using portable grinder, wire brush, hand file, bench grinder, wire wheel, etc.Lift, move, transport steel parts using hydraulic lifts, plate clamps, chain hoists, dollies and hand carts.Observe and follows all company safety rules and regulations.Clean and maintain an orderly work area.Work well with others to ensure quality of work while maintaining scheduling demands.Performs other miscellaneous tasks as directed by management.Working hours: 6:30 AM - 4:00 PMSkills:Ability to communicate both verbally as well as through written communication.Reliable and punctual.Education:No Degree RequiredExperience:1-4 yearsQualifications:Ability to lift 50 pounds.Must possess adequate sight, hearing and use of limbs for all aspects of job.Able to work for periods of time while kneeling, crouching, crawling, climbing steps as well as the ability to work from a ladder.Ability to pass a drug and alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant Company 30%, empl 70%. To offset the deductible?company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $20.50 - $22.50 per hour
      • 6:00 AM - 4:00 PM
      Manufacturing PainterResponsibilities:Using paint guns to uniformly coat metal products for customers.Working hours: 6:00 AM - 4:00 PMSkills:Background in painting products for customers with paint gunEducation:No Degree RequiredExperience:1-4 yearsQualifications:Ability to lift 50 lbs. Ability to pass a drug and alcohol screen Punctual Dependable Direct Hire with a locally owned company! Great Benefits: 401(k) matching Employee discount Health insurance Health savings account? Life insurance? Paid time off? Retirement planSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Manufacturing PainterResponsibilities:Using paint guns to uniformly coat metal products for customers.Working hours: 6:00 AM - 4:00 PMSkills:Background in painting products for customers with paint gunEducation:No Degree RequiredExperience:1-4 yearsQualifications:Ability to lift 50 lbs. Ability to pass a drug and alcohol screen Punctual Dependable Direct Hire with a locally owned company! Great Benefits: 401(k) matching Employee discount Health insurance Health savings account? Life insurance? Paid time off? Retirement planSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $27.00 - $30.00 per hour
      • 6:00 AM - 4:00 PM
      Structural Steel Detailer - DrafterResponsibilities:Drafter transfers information off contract documents/governing codes and draft them in shop drawing format.Working hours: 6:00 AM - 4:00 PMSkills:Proficient at reading and understanding prints and specifications.Knowledgeable in AISC Standard connections, charts and code of standard practices.Knowledgeable in IBC, OSHA, NAAMM, NOMMA, ASTM, and ANSI Codes.Knowledgeable in AWS Welding symbols.Familiar with standard steel shapes and sizes.Good working knowledge of steel joists and deck.Education:No Degree RequiredExperience:1-4 yearsQualifications:Competent at using AutoCAD 2014, SDS2, Microsoft Office, and Adobe.Must be neat, punctual, dependable, have attention to details, follow instructions, work under pressure, organized, able to multi-task and willing to learn.Should be able to make changes to shop drawings and follow through with the changes completely.Ability to pass a drug/alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant: Company 30%, empl 70%. To offset the deductible, company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Structural Steel Detailer - DrafterResponsibilities:Drafter transfers information off contract documents/governing codes and draft them in shop drawing format.Working hours: 6:00 AM - 4:00 PMSkills:Proficient at reading and understanding prints and specifications.Knowledgeable in AISC Standard connections, charts and code of standard practices.Knowledgeable in IBC, OSHA, NAAMM, NOMMA, ASTM, and ANSI Codes.Knowledgeable in AWS Welding symbols.Familiar with standard steel shapes and sizes.Good working knowledge of steel joists and deck.Education:No Degree RequiredExperience:1-4 yearsQualifications:Competent at using AutoCAD 2014, SDS2, Microsoft Office, and Adobe.Must be neat, punctual, dependable, have attention to details, follow instructions, work under pressure, organized, able to multi-task and willing to learn.Should be able to make changes to shop drawings and follow through with the changes completely.Ability to pass a drug/alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant: Company 30%, empl 70%. To offset the deductible, company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Austin, Minnesota
      • Permanent
      • $22.50 - $24.00 per hour
      • 6:00 AM - 4:00 PM
      Machinist able to operate and maintain a manual Lathe Milling Machine.Job Responsibilities:? Ability to operate and maintain a manual lathe (milling machine).? Reviews drawings, instructions, blueprints or samples to ensure accurate production.? Takes precise measurements for cutting or shaping.? Can convert fractions to decimals, program CNC Mill with conversational programming or G-code and read caliper micrometer calibration.? Monitors production, adjusts feed and other settings as necessary.? Maintains inventory of completed products.? Checks output for quality assurance and documents or discards defects.? Identifies need for and performs machine maintenance and minor repairs.? Maintains a safe and clean workstation.? Ability to accomplish related tasks as needed and in a timely manner.Skills? Excellent coordination and mechanical skills? Attention to detail, accuracy, and safety? Solid written and verbal communication skills? Punctual? Self-motivated.Qualifications? Proficient in math? Basic computer skills? Ability to lift 50 pounds and perform repetitive tasksCall to Action: Direct Hire! Great Benefits:? 401(k) matching? Employee discount? Health insurance? Health savings account? Life insurance? Paid time off? Retirement planResponsibilities:Ability to operate and maintain a manual lathe (milling machine).Reviews drawings, instructions, blueprints or samples to ensure accurate production.Takes precise measurements for cutting or shaping.Can convert fractions to decimals, program CNC Mill with conversational programming or G-code and read caliper micrometer calibration.Monitors production, adjusts feed and other settings as necessary.Maintains inventory of completed products.Checks output for quality assurance and documents or discards defects.Identifies need for and performs machine maintenance and minor repairs. Maintains a safe and clean workstation.Ability to accomplish related tasks as needed and in a timely manner.Working hours: 6:00 AM - 4:00 PMSkills:-Excellent coordination and mechanical skills-Attention to detail, accuracy, and safety-Solid written and verbal communication skills-Punctual-Self-motivated.Education:No Degree RequiredExperience:1-4 yearsQualifications:Proficient in mathBasic computer skillsAbility to lift 50 pounds and perform repetitive tasks Direct Hire! Great Benefits:401(k) matchingEmployee discountHealth insuranceHealth savings accountLife insurancePaid time offRetirement planSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Machinist able to operate and maintain a manual Lathe Milling Machine.Job Responsibilities:? Ability to operate and maintain a manual lathe (milling machine).? Reviews drawings, instructions, blueprints or samples to ensure accurate production.? Takes precise measurements for cutting or shaping.? Can convert fractions to decimals, program CNC Mill with conversational programming or G-code and read caliper micrometer calibration.? Monitors production, adjusts feed and other settings as necessary.? Maintains inventory of completed products.? Checks output for quality assurance and documents or discards defects.? Identifies need for and performs machine maintenance and minor repairs.? Maintains a safe and clean workstation.? Ability to accomplish related tasks as needed and in a timely manner.Skills? Excellent coordination and mechanical skills? Attention to detail, accuracy, and safety? Solid written and verbal communication skills? Punctual? Self-motivated.Qualifications? Proficient in math? Basic computer skills? Ability to lift 50 pounds and perform repetitive tasksCall to Action: Direct Hire! Great Benefits:? 401(k) matching? Employee discount? Health insurance? Health savings account? Life insurance? Paid time off? Retirement planResponsibilities:Ability to operate and maintain a manual lathe (milling machine).Reviews drawings, instructions, blueprints or samples to ensure accurate production.Takes precise measurements for cutting or shaping.Can convert fractions to decimals, program CNC Mill with conversational programming or G-code and read caliper micrometer calibration.Monitors production, adjusts feed and other settings as necessary.Maintains inventory of completed products.Checks output for quality assurance and documents or discards defects.Identifies need for and performs machine maintenance and minor repairs. Maintains a safe and clean workstation.Ability to accomplish related tasks as needed and in a timely manner.Working hours: 6:00 AM - 4:00 PMSkills:-Excellent coordination and mechanical skills-Attention to detail, accuracy, and safety-Solid written and verbal communication skills-Punctual-Self-motivated.Education:No Degree RequiredExperience:1-4 yearsQualifications:Proficient in mathBasic computer skillsAbility to lift 50 pounds and perform repetitive tasks Direct Hire! Great Benefits:401(k) matchingEmployee discountHealth insuranceHealth savings accountLife insurancePaid time offRetirement planSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mason City, Iowa
      • Permanent
      • $18.00 - $22.00 per hour
      • 6:10 AM - 3:45 PM
      Responsible for the manufacturing of printed labels while continuously monitoring label quality and press conditions. Meet safety, housekeeping, quality, scrap and productivity standards while meeting production schedules.Responsibilities:1. Completes make ready in accordance with the work order and Product Specification documents to ensure correct print cylinders, inks, substrates, tooling, and anilox rollers are used. 2. Responsible for completing all required quality checks related to product specifications, visual, and functional checks. Completes all press-side quality checks. 3. Operates press to produce product in accordance to customer specifications while maintain quality, waste, and press efficiency.4) Maintains consistent quality during the production run. Critical quality checks includes copy, color, and registration, and ink adhesion. Ensure conformance to all other quality checks5) Back up to HP Indigo, Crusader and Delta Laser6) Perform safe and effective operation of all operations7) Perform preventive and routine maintenance on schedule and according to procedures.8) Maintain a clean and orderly work environment.9) Evaluate and achieve optimum print quality.10) Systematically analyze and troubleshoot mechanical and print problems.11) Monitor and minimize downtime by making accurate and efficient press adjustments.12) Maintain effective use of raw material through effective machine and materials management.13) Verify proper job setup prior to printing to minimize errors and rework.14) Produce flexo printed samples as required for product and prototype testing.15) Assist in performing other duties for the work team or other teams as needed.16) Cross-train and work in other areas as requested17) Produce quality work in an efficient and timely manner to assist Metalcraft in meeting customer needs.18) Assist with the completion of all related standard work instructions, and quality measurementsWorking hours: 6:10 AM - 3:45 PMSkills:* Good computer skills * Experience with flexography printing desired * Experience with inkjet systems & variable imaging desired * Working knowledge of Webtron 750 Flexo press desiredEducation:High SchoolExperience:1-4 yearsQualifications:* Willingness to learn new methods and try new ideas * Willingness/ability to train others * Good manual dexterity and mechanical ability * Good interpersonal and communication skills * High attention to detail and good visual discrimination * Willingness to work flexible hours and overtime * Ability to lift 40 pounds * Ability to use measuring devices * Takes pride in producing a high-quality product * Ability to accurately match colors * High School including Basic Math This company is employee owned, and the culture reflects that! They are very laid back and casual (shorts & tennis shoes), with high expectations. Forgiving environment. They are committed to Training and growing you in your position. Much opportunity for growth and advancement rapid expansion. Very limited weekends. Very clean working conditions and bonus - Air Conditioned! Benefits: Employee Owned! Health Insurance, Dental, Vision, 401K, Profit Sharing, the best wellness Program around! They have a tissue therapist there every Tues and Thurs for increased mobility and strongly encourage participation.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for the manufacturing of printed labels while continuously monitoring label quality and press conditions. Meet safety, housekeeping, quality, scrap and productivity standards while meeting production schedules.Responsibilities:1. Completes make ready in accordance with the work order and Product Specification documents to ensure correct print cylinders, inks, substrates, tooling, and anilox rollers are used. 2. Responsible for completing all required quality checks related to product specifications, visual, and functional checks. Completes all press-side quality checks. 3. Operates press to produce product in accordance to customer specifications while maintain quality, waste, and press efficiency.4) Maintains consistent quality during the production run. Critical quality checks includes copy, color, and registration, and ink adhesion. Ensure conformance to all other quality checks5) Back up to HP Indigo, Crusader and Delta Laser6) Perform safe and effective operation of all operations7) Perform preventive and routine maintenance on schedule and according to procedures.8) Maintain a clean and orderly work environment.9) Evaluate and achieve optimum print quality.10) Systematically analyze and troubleshoot mechanical and print problems.11) Monitor and minimize downtime by making accurate and efficient press adjustments.12) Maintain effective use of raw material through effective machine and materials management.13) Verify proper job setup prior to printing to minimize errors and rework.14) Produce flexo printed samples as required for product and prototype testing.15) Assist in performing other duties for the work team or other teams as needed.16) Cross-train and work in other areas as requested17) Produce quality work in an efficient and timely manner to assist Metalcraft in meeting customer needs.18) Assist with the completion of all related standard work instructions, and quality measurementsWorking hours: 6:10 AM - 3:45 PMSkills:* Good computer skills * Experience with flexography printing desired * Experience with inkjet systems & variable imaging desired * Working knowledge of Webtron 750 Flexo press desiredEducation:High SchoolExperience:1-4 yearsQualifications:* Willingness to learn new methods and try new ideas * Willingness/ability to train others * Good manual dexterity and mechanical ability * Good interpersonal and communication skills * High attention to detail and good visual discrimination * Willingness to work flexible hours and overtime * Ability to lift 40 pounds * Ability to use measuring devices * Takes pride in producing a high-quality product * Ability to accurately match colors * High School including Basic Math This company is employee owned, and the culture reflects that! They are very laid back and casual (shorts & tennis shoes), with high expectations. Forgiving environment. They are committed to Training and growing you in your position. Much opportunity for growth and advancement rapid expansion. Very limited weekends. Very clean working conditions and bonus - Air Conditioned! Benefits: Employee Owned! Health Insurance, Dental, Vision, 401K, Profit Sharing, the best wellness Program around! They have a tissue therapist there every Tues and Thurs for increased mobility and strongly encourage participation.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Clear Lake, Iowa
      • Permanent
      • $15.00 per hour
      • 7:00 AM - 3:30 AM
      The Production team builds new wood pallets and rebuilds/recycles used wood pallets.Responsibilities:Used Pallet Assembly: In this role, members will be responsible for assembling and repairing used pallets. This entails inspecting used pallets for damage and repairing any structural damage with used lumber. Assembly is done by hand using air tools. Day-to-Day Responsibilities include operating hand tools, air tools, and forklifts.Working hours: 7:00 AM - 3:30 AMSkills:Ability to use saws, fork trucks, skid loaders, hand tools, air tools, and electric lift tools.Education:No Degree RequiredExperience:0-1 yearsQualifications:A background in manufacturing would be preferred. Direct Hire positions with a 25 year company. No drug screen, background check or HS diploma required. Benefits include: Paid time off, Paid Holidays, Onsite Snacks, Financial Planning Resources, Company Matched 401k, Free Wash Services to Employees & Significant Others, Employee Discounts on Most ProductsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Production team builds new wood pallets and rebuilds/recycles used wood pallets.Responsibilities:Used Pallet Assembly: In this role, members will be responsible for assembling and repairing used pallets. This entails inspecting used pallets for damage and repairing any structural damage with used lumber. Assembly is done by hand using air tools. Day-to-Day Responsibilities include operating hand tools, air tools, and forklifts.Working hours: 7:00 AM - 3:30 AMSkills:Ability to use saws, fork trucks, skid loaders, hand tools, air tools, and electric lift tools.Education:No Degree RequiredExperience:0-1 yearsQualifications:A background in manufacturing would be preferred. Direct Hire positions with a 25 year company. No drug screen, background check or HS diploma required. Benefits include: Paid time off, Paid Holidays, Onsite Snacks, Financial Planning Resources, Company Matched 401k, Free Wash Services to Employees & Significant Others, Employee Discounts on Most ProductsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Osage, Iowa
      • Permanent
      • $14.00 per hour
      • 7:00 AM - 3:30 PM
      Package product to meet or exceed customer specifications.Responsibilities:Packaging OperatorWrap boxingBandingApply ridersHang tags or any other type of packaging as deemed necessaryIndi Poly BagSame as above for Packaging OperatorInsert socks into individual bagsTransfer IronPlace heat transfer on a pair of socks as direct by work order.General DutiesUse appropriate care and safety precautions when working with any manual or automated machinery.Read and follow work orders and manufacturing specifications charts accurately.Complete daily reports accurately and in a timely manner.Review supplies provided before beginning each order, ensuring that the correct materials have been provided according to the work order.Must lift flats of socks from shoulder level to table level periodically throughout the shift, with weight from seven (7) pounds to twenty (20) pounds.Must lift boxes containing wrap boxes from shoulder level to table level, with weights from twelve (12) to twenty-nine (29) pounds.Take socks off flats and lay on work table. Place appropriate supplies on work table.Push/pull buggies of socks to the next station.Clean work area at the end of the shift.Participate in five minute exercise program twice daily.Prompt and regular attendance is required.Other duties as assigned.MACHINES, TOOLS, EQUIPMENT USED:Auto Tach-It MachineBanderHeat sealerTach-It gun with tach-it needlesSticker machineTransfer ironStationary insert barShrink tunnelPen/pencilTach-it barbsAutomated packaging machinePROTECTIVE EQUIPMENT REQUIRED:None required.Working hours: 7:00 AM - 3:30 PMSkills:Must possess sufficient manual dexterity, hand-eye-foot coordination and general stamina to work on a highly repetitive jobEducation:No Degree RequiredExperience:0-1 yearsQualifications:1)Education:Must be able to read and write legibly.Must be able to add and subtract (including fractions) without using a calculator2)Experience:None Required Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Package product to meet or exceed customer specifications.Responsibilities:Packaging OperatorWrap boxingBandingApply ridersHang tags or any other type of packaging as deemed necessaryIndi Poly BagSame as above for Packaging OperatorInsert socks into individual bagsTransfer IronPlace heat transfer on a pair of socks as direct by work order.General DutiesUse appropriate care and safety precautions when working with any manual or automated machinery.Read and follow work orders and manufacturing specifications charts accurately.Complete daily reports accurately and in a timely manner.Review supplies provided before beginning each order, ensuring that the correct materials have been provided according to the work order.Must lift flats of socks from shoulder level to table level periodically throughout the shift, with weight from seven (7) pounds to twenty (20) pounds.Must lift boxes containing wrap boxes from shoulder level to table level, with weights from twelve (12) to twenty-nine (29) pounds.Take socks off flats and lay on work table. Place appropriate supplies on work table.Push/pull buggies of socks to the next station.Clean work area at the end of the shift.Participate in five minute exercise program twice daily.Prompt and regular attendance is required.Other duties as assigned.MACHINES, TOOLS, EQUIPMENT USED:Auto Tach-It MachineBanderHeat sealerTach-It gun with tach-it needlesSticker machineTransfer ironStationary insert barShrink tunnelPen/pencilTach-it barbsAutomated packaging machinePROTECTIVE EQUIPMENT REQUIRED:None required.Working hours: 7:00 AM - 3:30 PMSkills:Must possess sufficient manual dexterity, hand-eye-foot coordination and general stamina to work on a highly repetitive jobEducation:No Degree RequiredExperience:0-1 yearsQualifications:1)Education:Must be able to read and write legibly.Must be able to add and subtract (including fractions) without using a calculator2)Experience:None Required Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Osage, Iowa
      • Permanent
      • $15.50 per hour
      • 10:30 PM - 7:00 AM
      Operate an assigned set of knitting machines and inspect beanie quality to produce a product that meets or exceeds customer specifications.Responsibilities:Run knitting machines on different lines to meet production demands on a daily basis.Identify flaws in the product and separate off-quality from first quality. Read and follow work orders and manufacturing specifications accurately.At the beginning of the shift, collect correct materials, per work orders, push the cart to assigned knitting line and place supplies behind knitting machines. Empty carts weigh from twenty-five (25) to thirty (30) pounds. Filled carts weigh from fifty (50) to one hundred (100) pounds. Obtaining yarns should be done at the start and middle of the shift and when a style or color change occurs. Grasp cone(s) of yarn/nylon weighing up to five (5) pounds and place on spindle of yarn rack located behind knitting machine. Spindle heights range from thirty-eight (38) to seventy (70) inches from the floor. May have to reach around the knitting machine to perform this task.Thread the knitting machines by properly threading yarn/nylon through small eyelets as necessary. Requires reaching above shoulder level. Tie new cone(s) of yarn/nylon to existing cones to prevent machine from running out or to repair yarn breaks.Bend over and grasp socks that have accumulated in the knitting machine When cycling, thoroughly inspect the last sock knit at each machine. Inspect additional socks if a defect is observed. Accurately complete daily work tickets, production forms and all other required paperwork in a timely manner.Responsible to ensure that the correct materials are threaded into each assigned machine. When changing colors, notify your Mechanic so that he can re-size the sock.Immediately stop any machine not producing first quality by using the on/off button. Communicate the problem with the sock(s) to the Mechanic. Notify Mechanic when a sizing problem is detected so Mechanic can size socks and adjust machines as necessary.Monitor own break times, begin work and return from breaks on time.Place waste in appropriate containers/locations.Participate in five minute exercise program twice daily.Prompt and regular attendance is required.MACHINES, TOOLS, EQUIPMENT USED:Knitting machines, Nippers/scissors, Tweezers, Apron, Wheeled carts, Step stool, Bundle tiesWorking hours: 10:30 PM - 7:00 AMSkills:Must possess sufficient manual dexterity, hand/eye coordination and general stamina to work on a highly repetitive job.Education:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read and write legibly.Must be able to add and subtract (including fractions) without using a calculator.No Experience required. Will train Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Operate an assigned set of knitting machines and inspect beanie quality to produce a product that meets or exceeds customer specifications.Responsibilities:Run knitting machines on different lines to meet production demands on a daily basis.Identify flaws in the product and separate off-quality from first quality. Read and follow work orders and manufacturing specifications accurately.At the beginning of the shift, collect correct materials, per work orders, push the cart to assigned knitting line and place supplies behind knitting machines. Empty carts weigh from twenty-five (25) to thirty (30) pounds. Filled carts weigh from fifty (50) to one hundred (100) pounds. Obtaining yarns should be done at the start and middle of the shift and when a style or color change occurs. Grasp cone(s) of yarn/nylon weighing up to five (5) pounds and place on spindle of yarn rack located behind knitting machine. Spindle heights range from thirty-eight (38) to seventy (70) inches from the floor. May have to reach around the knitting machine to perform this task.Thread the knitting machines by properly threading yarn/nylon through small eyelets as necessary. Requires reaching above shoulder level. Tie new cone(s) of yarn/nylon to existing cones to prevent machine from running out or to repair yarn breaks.Bend over and grasp socks that have accumulated in the knitting machine When cycling, thoroughly inspect the last sock knit at each machine. Inspect additional socks if a defect is observed. Accurately complete daily work tickets, production forms and all other required paperwork in a timely manner.Responsible to ensure that the correct materials are threaded into each assigned machine. When changing colors, notify your Mechanic so that he can re-size the sock.Immediately stop any machine not producing first quality by using the on/off button. Communicate the problem with the sock(s) to the Mechanic. Notify Mechanic when a sizing problem is detected so Mechanic can size socks and adjust machines as necessary.Monitor own break times, begin work and return from breaks on time.Place waste in appropriate containers/locations.Participate in five minute exercise program twice daily.Prompt and regular attendance is required.MACHINES, TOOLS, EQUIPMENT USED:Knitting machines, Nippers/scissors, Tweezers, Apron, Wheeled carts, Step stool, Bundle tiesWorking hours: 10:30 PM - 7:00 AMSkills:Must possess sufficient manual dexterity, hand/eye coordination and general stamina to work on a highly repetitive job.Education:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read and write legibly.Must be able to add and subtract (including fractions) without using a calculator.No Experience required. Will train Direct Hire Position with Benefits Including: Medical, Health Savings Account, Dental, Vision, Life + AD & D, Disability, 401K. Climate controlled environment! Ergonomically friendly facility (adjustable work stations, exercises throughout the day). PPE provided (do not require steel-toed shoes). On-site vending, employee discounts on product (50%). Piece-rate incentive system for board/pair, packaging, and seaming operators.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 37 jobs seen

    Thank you for subscribing to your personalized job alerts.

    Explore over 37 jobs in Northwood

    It looks like you want to switch your language. This will reset your filters on your current job search.