Support manufacturing objectives and goals through various manufacturing techniques of the assembly of product.Responsibilities:Primary Duties & Responsibilities:Perform Inspection of own workResponsible for operating production equipment, and proper handling of product.Follow Clean room operating proceduresProperly load and unload productComplete Preventative Maintenance tasksWork with manufacturing and engineering teams across the cleanroom and fab departments to ensure all issues are solved appropriately and efficientlyA high standard for quality and a safe work environment is maintained. Achievement of goals and objectivesFollow instructions and procedures closely while offering suggestions for continuous improvementWorking hours: 3:00 PM - 11:00 PM (Various Shifts Available)Skills:Basic reading and math skillsDemonstrated ability to achieve results independently or working with othersAbility to read engineering drawings and process proceduresAbility to follow instructions and procedures closely while offering suggestions for continuous improvementGood interpersonal and communication skillsWork with a high standard of ethics, professionalism, and competencyAdapt readily to changes in work caused by new requirements and/or situationsMaintains a positive attitude and is cooperative in working with othersAbility to excel in a cross-organizational, cross cultural, global team environmentEducation:High SchoolExperience:1-4 yearsQualifications:Education & Experience:High School diploma2 years' experience in a manufacturing (semiconductor) environment.Skills & Other Requirements Apply at spherion.com/apply/75102 or send resumes to cindysomers@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Support manufacturing objectives and goals through various manufacturing techniques of the assembly of product.Responsibilities:Primary Duties & Responsibilities:Perform Inspection of own workResponsible for operating production equipment, and proper handling of product.Follow Clean room operating proceduresProperly load and unload productComplete Preventative Maintenance tasksWork with manufacturing and engineering teams across the cleanroom and fab departments to ensure all issues are solved appropriately and efficientlyA high standard for quality and a safe work environment is maintained. Achievement of goals and objectivesFollow instructions and procedures closely while offering suggestions for continuous improvementWorking hours: 3:00 PM - 11:00 PM (Various Shifts Available)Skills:Basic reading and math skillsDemonstrated ability to achieve results independently or working with othersAbility to read engineering drawings and process proceduresAbility to follow instructions and procedures closely while offering suggestions for continuous improvementGood interpersonal and communication skillsWork with a high standard of ethics, professionalism, and competencyAdapt readily to changes in work caused by new requirements and/or situationsMaintains a positive attitude and is cooperative in working with othersAbility to excel in a cross-organizational, cross cultural, global team environmentEducation:High SchoolExperience:1-4 yearsQualifications:Education & Experience:High School diploma2 years' experience in a manufacturing (semiconductor) environment.Skills & Other Requirements Apply at spherion.com/apply/75102 or send resumes to cindysomers@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
The Maintenance Technician 2 is responsible for the maintenance of machinery and auxiliary equipment. He/ She will engage in the repair of automated computerized machine controls, and repair and maintain machines, equipment, buildings and grounds.Responsibilities:Makes major electrical, mechanical, and construction repairs and installation involving schematics and/or blueprint interpretation.Troubleshoots drive related issues to component level of controllers.Determines root cause of failures and recommends preventive actions. Communicates same through work order system comments/history.Communicates consistently with internal customers regarding status of equipment in shop.Advises supervisor of needs for outside services and works with service representatives on equipment and controls repair and installation. Shows competency in several crafts and performs handyman aspects in all trades.Constructs sketches of mechanical or construction alterations/installations and electrical circuitry.Prepares bills of material on jobs requiring major material use and initiates purchase requisitions.Makes day to day work-related decisions.Uses various material handling equipment such as hoists, carts, lifts, fork trucks and hand trucks in moving light to heavy weight material.Uses a variety of lock-out/tag-out devices as required per plant LOTO Plan.Working hours: 8:30 AM - 5:00 PMSkills:PLC EXPERIENCE IS A MUSTHigh School Diploma or GED equivalent required.Strong mechanical and electrical skills.Comprehension of schematics/blueprints.Knowledge of Hydraulic/pneumatic systems desirable.Self-starter and motivated to maintain building/machines to 100% uptime via strong preventative activities.Willingness to change, flex and learn, Self-motivated, work pride, Innovative, Customer focused, Critical thinkingTeamworkMechanical Aptitude, Computer Skills and Standard Work AdherenceEducation:High SchoolExperience:1-4 yearsQualifications:PLC EXPERIENCE IS A MUSTDegree in Industrial Maintenance Technology or equivalent preferred.Experience with Industrial Machinery preferred.Three (3) plus years of experience in Maintenance is preferred. This is a DIRECT HIRE opportunity, not a temp-to-hire. We are currently sourcing candidates directly for a manufacturing client of ours in McGregor. If selected, you will be an employee of our client from the start. If insterested, please apply online at www.spherion.com/apply and when asked to choose an office, choose: TX 75064 WACO then send your resume to solmelton@spherion.com to let me know you've completed your application.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
The Maintenance Technician 2 is responsible for the maintenance of machinery and auxiliary equipment. He/ She will engage in the repair of automated computerized machine controls, and repair and maintain machines, equipment, buildings and grounds.Responsibilities:Makes major electrical, mechanical, and construction repairs and installation involving schematics and/or blueprint interpretation.Troubleshoots drive related issues to component level of controllers.Determines root cause of failures and recommends preventive actions. Communicates same through work order system comments/history.Communicates consistently with internal customers regarding status of equipment in shop.Advises supervisor of needs for outside services and works with service representatives on equipment and controls repair and installation. Shows competency in several crafts and performs handyman aspects in all trades.Constructs sketches of mechanical or construction alterations/installations and electrical circuitry.Prepares bills of material on jobs requiring major material use and initiates purchase requisitions.Makes day to day work-related decisions.Uses various material handling equipment such as hoists, carts, lifts, fork trucks and hand trucks in moving light to heavy weight material.Uses a variety of lock-out/tag-out devices as required per plant LOTO Plan.Working hours: 8:30 AM - 5:00 PMSkills:PLC EXPERIENCE IS A MUSTHigh School Diploma or GED equivalent required.Strong mechanical and electrical skills.Comprehension of schematics/blueprints.Knowledge of Hydraulic/pneumatic systems desirable.Self-starter and motivated to maintain building/machines to 100% uptime via strong preventative activities.Willingness to change, flex and learn, Self-motivated, work pride, Innovative, Customer focused, Critical thinkingTeamworkMechanical Aptitude, Computer Skills and Standard Work AdherenceEducation:High SchoolExperience:1-4 yearsQualifications:PLC EXPERIENCE IS A MUSTDegree in Industrial Maintenance Technology or equivalent preferred.Experience with Industrial Machinery preferred.Three (3) plus years of experience in Maintenance is preferred. This is a DIRECT HIRE opportunity, not a temp-to-hire. We are currently sourcing candidates directly for a manufacturing client of ours in McGregor. If selected, you will be an employee of our client from the start. If insterested, please apply online at www.spherion.com/apply and when asked to choose an office, choose: TX 75064 WACO then send your resume to solmelton@spherion.com to let me know you've completed your application.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local Manufacturing Company is seeking an Experienced Manufacturing Technician to join the fast growing team.Company offers a Full Benefit Package starting on 1st day of employment. Company also offers a $1,000 sign-on bonus along with a $3,600 housing subsidy.Responsibilities:Applies experience and skills in electrical assembly and test, complex plumbing fabrication or, mechanical assembly and test to build and/or test subassemblies or systems. Works with a moderate to low degree of supervision.Key Responsibilities? Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.? May make own set-ups, alignments and adjustments, maintaining tolerance according to instructions. Performs precision measurements and works with close tolerances. Adjusts, aligns and/or performs "go-no go" tests using test fixtures or non-diagnostic electronic testing devices.? Performs in-process quality audits and defines follow-up action. Demonstrates understanding of companies planning and delivery process. Works with area supervision in establishing continuous improvement activities within work area.? Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.? Acts as a role model for safety and training. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training, and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety department. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.Working hours: Various Shifts AvailableSkills:-Good Organizational skills-Has Good Attention to detail-Self-motivated-Willing to pursue growth opportunities and challenging assignments-Active contributor to meet team objectivesEducation:High SchoolExperience:1-4 yearsQualifications:-Associates Degree or a specific certification in skill set or technical trade-1-2 years of experience-Ability to pass a background check Available Shifts:Day Shift: Monday - Thursday 6:00 am - 4:30 pmSwing Shift: Monday - Thursday 4:00 pm - 2:30 amWeekend Shift: Friday - Sunday 6:00 am -6:30 pmApply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Local Manufacturing Company is seeking an Experienced Manufacturing Technician to join the fast growing team.Company offers a Full Benefit Package starting on 1st day of employment. Company also offers a $1,000 sign-on bonus along with a $3,600 housing subsidy.Responsibilities:Applies experience and skills in electrical assembly and test, complex plumbing fabrication or, mechanical assembly and test to build and/or test subassemblies or systems. Works with a moderate to low degree of supervision.Key Responsibilities? Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.? May make own set-ups, alignments and adjustments, maintaining tolerance according to instructions. Performs precision measurements and works with close tolerances. Adjusts, aligns and/or performs "go-no go" tests using test fixtures or non-diagnostic electronic testing devices.? Performs in-process quality audits and defines follow-up action. Demonstrates understanding of companies planning and delivery process. Works with area supervision in establishing continuous improvement activities within work area.? Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.? Acts as a role model for safety and training. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training, and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety department. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.Working hours: Various Shifts AvailableSkills:-Good Organizational skills-Has Good Attention to detail-Self-motivated-Willing to pursue growth opportunities and challenging assignments-Active contributor to meet team objectivesEducation:High SchoolExperience:1-4 yearsQualifications:-Associates Degree or a specific certification in skill set or technical trade-1-2 years of experience-Ability to pass a background check Available Shifts:Day Shift: Monday - Thursday 6:00 am - 4:30 pmSwing Shift: Monday - Thursday 4:00 pm - 2:30 amWeekend Shift: Friday - Sunday 6:00 am -6:30 pmApply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Temp-hire; employee must demonstrate clear knowledge of refrigeration and electrical components, their use, and the proper operation of those components. Possess working Knowledge of HVAC and dehumidification systems; industrial electrical knowledge to trouble shoot HVAC or environmental control systems. Ability to train and lead in all areas of test technician and work in multiple types of manufacturing positions (i.e. assembly, pipe, paint & wire).for controlling inventory and ordering shop supplies for the test area, must work well with others and be able to communicate written and verbal in English, Monday-Friday, some OT on the weekends, NOT mandatoryEnvironment details it could be loud, and cold depending on the season, fast paced, and important to stay up with the pace of the facility, training is very hands on and in active work environmentResponsibilities:.Working hours: Various Shifts AvailableSkills:.Education:TradeExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Temp-hire; employee must demonstrate clear knowledge of refrigeration and electrical components, their use, and the proper operation of those components. Possess working Knowledge of HVAC and dehumidification systems; industrial electrical knowledge to trouble shoot HVAC or environmental control systems. Ability to train and lead in all areas of test technician and work in multiple types of manufacturing positions (i.e. assembly, pipe, paint & wire).for controlling inventory and ordering shop supplies for the test area, must work well with others and be able to communicate written and verbal in English, Monday-Friday, some OT on the weekends, NOT mandatoryEnvironment details it could be loud, and cold depending on the season, fast paced, and important to stay up with the pace of the facility, training is very hands on and in active work environmentResponsibilities:.Working hours: Various Shifts AvailableSkills:.Education:TradeExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion has a great DIRECT HIRE opportunity for a Weekend HOURS Maintenance Technician. (Friday-Sunday 1pm-1:30am)The ideal candidate will take initiative, solve problems, and make decisions. We are seeking a Maintenance Technician to make sure our equipment is running smoothly Friday, Saturday and Sunday. This is a unique work schedule that could be perfect for someone who has other obligations/interests during the standard work week! In this role, you will keep the plant and equipment running in a safe and efficient manner and maintain/repair building and equipment in accordance with established company policies and procedures.Responsibilities:Manage start-up to make sure equipment is in proper operating condition.Demand Maintenance as assigned: Skill in diagnosing equipment defects and making necessary repairs.Maintain, repair and troubleshoot machinery, ovens, mechanical lift trucks, and facilities problems as needed for production issues and efficiency.Safety operate various machines, including a Band Saw, Break Press, Mill, Lathe, Grinder, etc.Inspect machines and equipment for conformance with operational standards.Maintain all areas of the shop, boiler room, and the interior/exterior of the plant.Troubleshoot electrical functions (i.e. motors, controls, PLC function, and other basic wiring)Confers with management and suppliers to resolve maintenance problems and recommends measures to improve operations and conditions of machines and equipmentComplete Preventative Maintenance tasks as assigned.Assist with inventory control of tools and parts on hand.Work with tools and power equipment as well as material handling.Operate mechanical forklift, pallet jack, battery-changer and stock picker. Follow Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) training, along with company pre-requisite programs, Standard Operating Procedures (SOPs), and Standard Sanitation Operating Procedures (SSOPs).Performs other duties and responsibilities as necessary.Working hours: 1:00 PM - 1:00 AMSkills:Ability to read and interpret documents such as safety rules, operating and/or maintenance instructions and procedure manuals.Ability to write routine breakdown, preventive maintenance and other maintenance related reports and correspondence.Intermediate verbal communication skills in English.Ability to add and subtract, multiply, and divide using whole numbers, common fractions, and decimals.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades (i.e. welding, tap measure, band saw, lathe, caliper, micrometer, etc.).Self-motivated, able to work unsupervised and with teamsProject orientedMulti-tasking abilityAttention to detailAbility to work in a fast-paced environmentWork well with othersExcellent verbal and written communication skills; must work effectively with all levels of management and team membersEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED1-5 years of related experience and/or training or equivalent combination of education and experiencePreferred: Basic knowledge of manufacturing.Facility maintenance experience preferredIndustrial mechanical experience.Knowledge of hydraulics, pneumatics and electronicsKnowledge of electrical/mechanical safety practicesPrior Knowledge of food processing equipment helpful. Electrical and electrical troubleshooting of 120/240/480 3ph sy
Spherion has a great DIRECT HIRE opportunity for a Weekend HOURS Maintenance Technician. (Friday-Sunday 1pm-1:30am)The ideal candidate will take initiative, solve problems, and make decisions. We are seeking a Maintenance Technician to make sure our equipment is running smoothly Friday, Saturday and Sunday. This is a unique work schedule that could be perfect for someone who has other obligations/interests during the standard work week! In this role, you will keep the plant and equipment running in a safe and efficient manner and maintain/repair building and equipment in accordance with established company policies and procedures.Responsibilities:Manage start-up to make sure equipment is in proper operating condition.Demand Maintenance as assigned: Skill in diagnosing equipment defects and making necessary repairs.Maintain, repair and troubleshoot machinery, ovens, mechanical lift trucks, and facilities problems as needed for production issues and efficiency.Safety operate various machines, including a Band Saw, Break Press, Mill, Lathe, Grinder, etc.Inspect machines and equipment for conformance with operational standards.Maintain all areas of the shop, boiler room, and the interior/exterior of the plant.Troubleshoot electrical functions (i.e. motors, controls, PLC function, and other basic wiring)Confers with management and suppliers to resolve maintenance problems and recommends measures to improve operations and conditions of machines and equipmentComplete Preventative Maintenance tasks as assigned.Assist with inventory control of tools and parts on hand.Work with tools and power equipment as well as material handling.Operate mechanical forklift, pallet jack, battery-changer and stock picker. Follow Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) training, along with company pre-requisite programs, Standard Operating Procedures (SOPs), and Standard Sanitation Operating Procedures (SSOPs).Performs other duties and responsibilities as necessary.Working hours: 1:00 PM - 1:00 AMSkills:Ability to read and interpret documents such as safety rules, operating and/or maintenance instructions and procedure manuals.Ability to write routine breakdown, preventive maintenance and other maintenance related reports and correspondence.Intermediate verbal communication skills in English.Ability to add and subtract, multiply, and divide using whole numbers, common fractions, and decimals.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades (i.e. welding, tap measure, band saw, lathe, caliper, micrometer, etc.).Self-motivated, able to work unsupervised and with teamsProject orientedMulti-tasking abilityAttention to detailAbility to work in a fast-paced environmentWork well with othersExcellent verbal and written communication skills; must work effectively with all levels of management and team membersEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED1-5 years of related experience and/or training or equivalent combination of education and experiencePreferred: Basic knowledge of manufacturing.Facility maintenance experience preferredIndustrial mechanical experience.Knowledge of hydraulics, pneumatics and electronicsKnowledge of electrical/mechanical safety practicesPrior Knowledge of food processing equipment helpful. Electrical and electrical troubleshooting of 120/240/480 3ph sy
Are you ready to take your maintenance skills to the next level? Spherion Staffing is currently seeking a maintenance technician to work for a growing company in Detroit Lakes, MN.Responsibilities:- Knowledgeable in all aspects of equipment maintenance- Knowledgeable in computers, wiring, programming, robotics, electrical work- Perform preventative maintenance on all plant equipment to ensure maximum productivity- Work with operations to ensure plant equipment is operating when necessary, through diagnosis, troubleshooting, and repairWorking hours: 7:00 AM - 3:30 PMSkills:- Maintenance aptitude- Mathematical skillsEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to work in a safe manner and follow all safety policies and procedures- Meet quality standards by demonstrating accuracy and thoroughness- Ability to work well with other team members, vendors, and customers To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Are you ready to take your maintenance skills to the next level? Spherion Staffing is currently seeking a maintenance technician to work for a growing company in Detroit Lakes, MN.Responsibilities:- Knowledgeable in all aspects of equipment maintenance- Knowledgeable in computers, wiring, programming, robotics, electrical work- Perform preventative maintenance on all plant equipment to ensure maximum productivity- Work with operations to ensure plant equipment is operating when necessary, through diagnosis, troubleshooting, and repairWorking hours: 7:00 AM - 3:30 PMSkills:- Maintenance aptitude- Mathematical skillsEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to work in a safe manner and follow all safety policies and procedures- Meet quality standards by demonstrating accuracy and thoroughness- Ability to work well with other team members, vendors, and customers To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Temp-hire; employee must demonstrate clear knowledge of refrigeration and electrical components, their use, and the proper operation of those components. Possess working Knowledge of HVAC and dehumidification systems; industrial electrical knowledge to trouble shoot HVAC or environmental control systems. Ability to train and lead in all areas of test technician and work in multiple types of manufacturing positions (i.e. assembly, pipe, paint & wire).for controlling inventory and ordering shop supplies for the test area, must work well with others and be able to communicate written and verbal in English, Monday-Friday, some OT on the weekends, NOT mandatoryEnvironment details it could be loud, and cold depending on the season, fast paced, and important to stay up with the pace of the facility, training is very hands on and in active work environmentResponsibilities:.Working hours: Various Shifts AvailableSkills:.Education:TradeExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Temp-hire; employee must demonstrate clear knowledge of refrigeration and electrical components, their use, and the proper operation of those components. Possess working Knowledge of HVAC and dehumidification systems; industrial electrical knowledge to trouble shoot HVAC or environmental control systems. Ability to train and lead in all areas of test technician and work in multiple types of manufacturing positions (i.e. assembly, pipe, paint & wire).for controlling inventory and ordering shop supplies for the test area, must work well with others and be able to communicate written and verbal in English, Monday-Friday, some OT on the weekends, NOT mandatoryEnvironment details it could be loud, and cold depending on the season, fast paced, and important to stay up with the pace of the facility, training is very hands on and in active work environmentResponsibilities:.Working hours: Various Shifts AvailableSkills:.Education:TradeExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Looking for a career focused opportunity with great job stability and a chance for growth? We are looking for welders with beginner to intermediate skill level for a large manufacturing company in the Bryan-College Station area. PREFERRED: experience in construction, manufacturing or fabricating fields.Responsibilities:Utilize the GMAW /MIG, GTAW/TIG processes of aluminum, carbon steel, and stainless steelTroubleshoot and repair problems with machinery to ensure everything is in working orderMaintain a clean and organized work spaceKeep up with accurate inventoryEnsures cost-effective usage of all equipment, supplies and toolsMaintain all company policies, standards and SOPsWorking hours: Various Shifts AvailableSkills:Able to lift and carry 25 pounds unassisted regularlyAble to read blueprints and plan aheadWillingness to travelAble to operate a forkliftWilling to operate a grinder, metabo and stationary saws, and basic hand toolsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma Or GED equivalentExperience in construction, manufacturing and fabrication preferred Apply nowSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Looking for a career focused opportunity with great job stability and a chance for growth? We are looking for welders with beginner to intermediate skill level for a large manufacturing company in the Bryan-College Station area. PREFERRED: experience in construction, manufacturing or fabricating fields.Responsibilities:Utilize the GMAW /MIG, GTAW/TIG processes of aluminum, carbon steel, and stainless steelTroubleshoot and repair problems with machinery to ensure everything is in working orderMaintain a clean and organized work spaceKeep up with accurate inventoryEnsures cost-effective usage of all equipment, supplies and toolsMaintain all company policies, standards and SOPsWorking hours: Various Shifts AvailableSkills:Able to lift and carry 25 pounds unassisted regularlyAble to read blueprints and plan aheadWillingness to travelAble to operate a forkliftWilling to operate a grinder, metabo and stationary saws, and basic hand toolsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma Or GED equivalentExperience in construction, manufacturing and fabrication preferred Apply nowSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Opportunity to work in a well established fast paced research, development and production company with corporate offices in Butte, Montana. Positions available are dependent on experience in related field, production or manufacturing environment. Also seeking individual with expanded experience/training in production, quality control, manufacturing. Positions are in support of experienced manufacturing team. Company offers competitive wages and benefits. Excellent opportunity working with a leading edge project team.Responsibilities:Position requires individuals with experience working with electro-mechanical equipment, mechanical and electrical assembly working with a high degree of detail and safety in all aspects of the production process.Working hours: 7:00 AM - 4:00 PMSkills:Manufacturing background in a complex assembly process. Mechanical and electrical experience with aptitude for troubleshooting. Detail oriented. Computer skills working with Microsoft Office and dedicated systems. Communication skills, both verbal and written. Ability to read and interpret manuals, plans, blueprints and reports. Ability to follow directions as to specifications. Basic Math and measurements. Advanced experience in mechanical and welding desired.Education:No Degree RequiredExperience:1-4 yearsQualifications:Positions require experience varying from three (3) years to 10 (ten) years. Pay per hour is dependent on skills, training and experience. Must have three(3) work related references. Interested candidate go to spherion.com/Apply and attach a detailed resume illustrating job history and experience. For questions or assistance, contact the local Spherion Staffing and Recruiting in Butte, Montana at 406-782-1130 or visit us at 1015. A. South Montana Street. KathyHenningsen@spherion.com Let's Get To Work!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Opportunity to work in a well established fast paced research, development and production company with corporate offices in Butte, Montana. Positions available are dependent on experience in related field, production or manufacturing environment. Also seeking individual with expanded experience/training in production, quality control, manufacturing. Positions are in support of experienced manufacturing team. Company offers competitive wages and benefits. Excellent opportunity working with a leading edge project team.Responsibilities:Position requires individuals with experience working with electro-mechanical equipment, mechanical and electrical assembly working with a high degree of detail and safety in all aspects of the production process.Working hours: 7:00 AM - 4:00 PMSkills:Manufacturing background in a complex assembly process. Mechanical and electrical experience with aptitude for troubleshooting. Detail oriented. Computer skills working with Microsoft Office and dedicated systems. Communication skills, both verbal and written. Ability to read and interpret manuals, plans, blueprints and reports. Ability to follow directions as to specifications. Basic Math and measurements. Advanced experience in mechanical and welding desired.Education:No Degree RequiredExperience:1-4 yearsQualifications:Positions require experience varying from three (3) years to 10 (ten) years. Pay per hour is dependent on skills, training and experience. Must have three(3) work related references. Interested candidate go to spherion.com/Apply and attach a detailed resume illustrating job history and experience. For questions or assistance, contact the local Spherion Staffing and Recruiting in Butte, Montana at 406-782-1130 or visit us at 1015. A. South Montana Street. KathyHenningsen@spherion.com Let's Get To Work!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 5:00 p.m. - 3:30 a.m., OT on Fridays as neededPay: $18.50/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 5:00 PM - 3:30 AMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 5:00 p.m. - 3:30 a.m., OT on Fridays as neededPay: $18.50/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 5:00 PM - 3:30 AMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
The Extruder Technician role will be responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly.Responsibilities:Coordinate and supervise daily machine start up and shut downUnderstand product quality requirements, provide related guidance, and assure products produced conformWork to become Rhinos extrusion and injection molding processing expertTroubleshoot product and process issues and problemsPerform/Coordinate daily equipment maintenance as specifiedAssist with documentation of equipment operation and maintenance schedules/plansGain proficiency in operation of all major equipment Provide training and cross-training to designated personnelProvide input regarding equipment repair, upgrade, and replacementPromote culture of safety, efficiency, and teamworkWorking hours: 6:00 AM - 2:25 PMSkills:--Comfortable in a flexible team environment--Able to work well independently to complete daily workload--Quick Thinking, Ability to problem solve--Attention to detail--Mechanically inclined--Ability to think outside the box, with a goal of improving processes and systems--Follows directions and adheres to company policiesEducation:High SchoolExperience:4-7 yearsQualifications:High school diploma or equivalent5+ years manufacturing experience, or equivalentFlexible, easy going, attitudeBasic knowledge in math, addition, subtraction, multiplication, division, and percentages.Working knowledge of manufacturing equipment and tools.Possesses basic computer skills.Effective communication skills.Candidates must pass a pre-employment background check, drug screen and be eligible for employment without sponsorship. Direct Hire position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business.Company Benefits include:Medical insurance with company contribution, dental, vision, and supplemental life insurance programs also available. Company paid life, short and long-term disability insurancePaid Holidays and paid time offCompany sponsored retirement plan with matching contributionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
The Extruder Technician role will be responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly.Responsibilities:Coordinate and supervise daily machine start up and shut downUnderstand product quality requirements, provide related guidance, and assure products produced conformWork to become Rhinos extrusion and injection molding processing expertTroubleshoot product and process issues and problemsPerform/Coordinate daily equipment maintenance as specifiedAssist with documentation of equipment operation and maintenance schedules/plansGain proficiency in operation of all major equipment Provide training and cross-training to designated personnelProvide input regarding equipment repair, upgrade, and replacementPromote culture of safety, efficiency, and teamworkWorking hours: 6:00 AM - 2:25 PMSkills:--Comfortable in a flexible team environment--Able to work well independently to complete daily workload--Quick Thinking, Ability to problem solve--Attention to detail--Mechanically inclined--Ability to think outside the box, with a goal of improving processes and systems--Follows directions and adheres to company policiesEducation:High SchoolExperience:4-7 yearsQualifications:High school diploma or equivalent5+ years manufacturing experience, or equivalentFlexible, easy going, attitudeBasic knowledge in math, addition, subtraction, multiplication, division, and percentages.Working knowledge of manufacturing equipment and tools.Possesses basic computer skills.Effective communication skills.Candidates must pass a pre-employment background check, drug screen and be eligible for employment without sponsorship. Direct Hire position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business.Company Benefits include:Medical insurance with company contribution, dental, vision, and supplemental life insurance programs also available. Company paid life, short and long-term disability insurancePaid Holidays and paid time offCompany sponsored retirement plan with matching contributionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
You will work on a team to perform all activities related to the digital printing process. Program and prepare jobs for printing, coating, cutting, packaging, to support production/customer needs. Trouble shoot equipment problems. Perform daily, weekly, monthly maintenance on equipment as required. Ensure product quality throughout the entire process. Develop, implement, and continuously improve product flow to ensure it is complimentary to company needs.Responsibilities:Operate digital printer, coater, cutter, and other supporting equipment. Program and prepare jobs for printing utilizing a computer, nesting software, and cutting software. Prioritize workload to achieve maximum output and meet production deadlines. Setup and maintain all printing equipment. Monitor product quality throughout the process. Control stock and purchased items by coordinating with Purchasing. Perform daily, weekly, monthly maintenance on equipment as required. All other duties as assigned?Working hours: 2:00 PM - 12:00 AMSkills:Experience in a digital printing or manufacturing environment -Ability to operate, and use, various applications related to printing processes, machines, computers, software -Ability to manage multiple tasks, with frequent interruptions -Ability to work in a fast-paced environment -Ability to work well in a team environment -Ability to work independently and make sound decisions -Computer skills, and software knowledge is recommended -Must be able to lift 30 pounds 25 percent of the time.--Willingness to work at a fast pace and maintain a high standard of qualityEducation:High SchoolExperience:1-4 yearsQualifications:Passing Pre-Employment screening including Drug Screen an Background. Direct Hire position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business. New facility, new machinery, A/C plant! Benefits include:?Medical insurance with company contribution?Dental?Vision Insurance?401K ?Health Savings Account?Company paid life, short and long-term disability insurance?Paid Holidays and paid time off?Company sponsored retirement plan with matching contributions?Tuition Reimbursement?Parental leave?Referral program?Tuition reimbursementSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
You will work on a team to perform all activities related to the digital printing process. Program and prepare jobs for printing, coating, cutting, packaging, to support production/customer needs. Trouble shoot equipment problems. Perform daily, weekly, monthly maintenance on equipment as required. Ensure product quality throughout the entire process. Develop, implement, and continuously improve product flow to ensure it is complimentary to company needs.Responsibilities:Operate digital printer, coater, cutter, and other supporting equipment. Program and prepare jobs for printing utilizing a computer, nesting software, and cutting software. Prioritize workload to achieve maximum output and meet production deadlines. Setup and maintain all printing equipment. Monitor product quality throughout the process. Control stock and purchased items by coordinating with Purchasing. Perform daily, weekly, monthly maintenance on equipment as required. All other duties as assigned?Working hours: 2:00 PM - 12:00 AMSkills:Experience in a digital printing or manufacturing environment -Ability to operate, and use, various applications related to printing processes, machines, computers, software -Ability to manage multiple tasks, with frequent interruptions -Ability to work in a fast-paced environment -Ability to work well in a team environment -Ability to work independently and make sound decisions -Computer skills, and software knowledge is recommended -Must be able to lift 30 pounds 25 percent of the time.--Willingness to work at a fast pace and maintain a high standard of qualityEducation:High SchoolExperience:1-4 yearsQualifications:Passing Pre-Employment screening including Drug Screen an Background. Direct Hire position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business. New facility, new machinery, A/C plant! Benefits include:?Medical insurance with company contribution?Dental?Vision Insurance?401K ?Health Savings Account?Company paid life, short and long-term disability insurance?Paid Holidays and paid time off?Company sponsored retirement plan with matching contributions?Tuition Reimbursement?Parental leave?Referral program?Tuition reimbursementSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.