Thank you for subscribing to your personalized job alerts.

    9 jobs found for Technician

    Filter3
    Clear all
      • Sioux Falls, South Dakota
      • Temporary
      • $16.00 - $16.50 per hour
      • 5:00 AM - 1:30 PM
      Spherion Staffing is looking to fill a temporary Laundry Technician role. The laundry Technician will complete tasks involving folding linens (including but not limited to gowns, sheets, towels, blankets etc.), sort and fold clothing, and complete the proper labeling process. Package and prepare clean linens for distribution. Participate in laundry collection and sorting, as well as the handling, storage and distribution of clean laundryHours: 5 am - 1:30 pm Monday - FridayPay: $16.50/hour Assignment length 12 weeksResponsibilities:See aboveWorking hours: 5:00 AM - 1:30 PMSkills:Requirements:-High School Diploma-Attention to detail-Computer knowledgeEducation:High SchoolExperience:0-1 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking to fill a temporary Laundry Technician role. The laundry Technician will complete tasks involving folding linens (including but not limited to gowns, sheets, towels, blankets etc.), sort and fold clothing, and complete the proper labeling process. Package and prepare clean linens for distribution. Participate in laundry collection and sorting, as well as the handling, storage and distribution of clean laundryHours: 5 am - 1:30 pm Monday - FridayPay: $16.50/hour Assignment length 12 weeksResponsibilities:See aboveWorking hours: 5:00 AM - 1:30 PMSkills:Requirements:-High School Diploma-Attention to detail-Computer knowledgeEducation:High SchoolExperience:0-1 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Winchester, Virginia
      • Temporary
      • $21.00 - $25.00 per hour
      • Various Shifts Available
      $21 + DOEvarious shifts:12 hours - days/nights6a-4p tues-friResponsibilities:Performs any combination of tasks needed to maintain machinery, plumbing, & other physical structures of the facility. Observes & checks mechanical devices through preventative maintenance practices to locate repair or recommend repair to these same equipment items. Dismantles defective equipment units to gain access to defective parts using hoists, power, & hand tools. Performs mechanical tasks as described on work orders. Catalogs machine deficiencies & other items that need repair on the machines being serviced. Performs lubrication tasks as needed for preventative maintenance & fills in for the Lubrication Tech as needed.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma & equivalent is requiredComputer SkillsMinimum of 2 years work experience in industrial repair or maintenance .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      $21 + DOEvarious shifts:12 hours - days/nights6a-4p tues-friResponsibilities:Performs any combination of tasks needed to maintain machinery, plumbing, & other physical structures of the facility. Observes & checks mechanical devices through preventative maintenance practices to locate repair or recommend repair to these same equipment items. Dismantles defective equipment units to gain access to defective parts using hoists, power, & hand tools. Performs mechanical tasks as described on work orders. Catalogs machine deficiencies & other items that need repair on the machines being serviced. Performs lubrication tasks as needed for preventative maintenance & fills in for the Lubrication Tech as needed.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma & equivalent is requiredComputer SkillsMinimum of 2 years work experience in industrial repair or maintenance .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Monument, Colorado
      • Temporary
      • $16.00 - $17.60 per hour
      • 5:00 AM - 3:00 PM
      We provide local staffing with a personal touch! Simply put, at Spherion we find people jobs and love what we do!Responsibilities:ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.Perform routine and repetitive inspection procedures to ensure quality levels at various stages of production.Inspect in-process and/or finished production assemblies and sub-assemblies for conformance to quality assurance standards.Read and follow visual aides, engineering change notices, or established operating procedures, determine acceptance or rejection of product.Work under close supervision of Manufacturing supervisor or other designated supervisor.Follow standardized and routine written directions and visual aides for assigned quality assurance inspection operations.Visually inspect products using magnifying glass, lot sampling methods, first article checks, and /or AOI machines.Enter standardized information into computerized MES system using simple keystrokes to indicate pass or failure of board.Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.Working hours: 5:00 AM - 3:00 PMSkills:Ability to work in a fast paced manufacturing environmentStrong attention to detailAbility to stand for 8-12 hoursBasic Mathematics and analytical skillsEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or equivalent required; or one to three months related experience and/or training; or equivalent combination of education and experience.Experience in QC Interested in this opportunity? Apply onlineHuge sign on bonus!Benefits offeredSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.For Colorado Residents Only: The hourly range for Colorado residents is $15.00 to $25.00/hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. In addition to your salary, Spherion offers a comprehensive benefits package, incentive and recognition program, and 401K contribution (all benefits are based on eligibility).
      We provide local staffing with a personal touch! Simply put, at Spherion we find people jobs and love what we do!Responsibilities:ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.Perform routine and repetitive inspection procedures to ensure quality levels at various stages of production.Inspect in-process and/or finished production assemblies and sub-assemblies for conformance to quality assurance standards.Read and follow visual aides, engineering change notices, or established operating procedures, determine acceptance or rejection of product.Work under close supervision of Manufacturing supervisor or other designated supervisor.Follow standardized and routine written directions and visual aides for assigned quality assurance inspection operations.Visually inspect products using magnifying glass, lot sampling methods, first article checks, and /or AOI machines.Enter standardized information into computerized MES system using simple keystrokes to indicate pass or failure of board.Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.Working hours: 5:00 AM - 3:00 PMSkills:Ability to work in a fast paced manufacturing environmentStrong attention to detailAbility to stand for 8-12 hoursBasic Mathematics and analytical skillsEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or equivalent required; or one to three months related experience and/or training; or equivalent combination of education and experience.Experience in QC Interested in this opportunity? Apply onlineHuge sign on bonus!Benefits offeredSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.For Colorado Residents Only: The hourly range for Colorado residents is $15.00 to $25.00/hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. In addition to your salary, Spherion offers a comprehensive benefits package, incentive and recognition program, and 401K contribution (all benefits are based on eligibility).
      • Colorado Springs, Colorado
      • Temporary
      • $20.00 - $23.00 per hour
      • 5:00 AM - 3:00 PM
      We provide local staffing with a personal touch! Simply put, at Spherion we find people jobs and love what we do!Responsibilities:Perform a wide range of inspection, testing, and auditing in support of Manufacturing Operations and New Product Development. This requires knowledge of Geometric Dimensioning and Tolerancing, Quality System Regulations, various inspection methods, metrology and calibration fundamentals, sampling principals, and fundamental statistical methods. Inspector is required to perform inspections of parts and sub-assemblies, using close tolerances and inspection equipment.You are responsible for? Performing visual, dimensional, and functional inspections on consumable products, laser systems, subassemblies, fixtures, and raw material.? Utilizing various measuring equipment to determine component acceptance.? Perform First Article Inspections; gathering data and submitting reports.? Review DHRs and LHRs for Good Documentation Practices.? Interface with Engineering, Quality, and Production Teammates to communicate quality standards and address issues in a timely manner.? Control nonconforming material and assist in release of quarantine product; which includes: creating, verifying, and closing nonconforming reports.? Successfully work in and promote a team-oriented environment; reduce work area distractions.Working hours: 5:00 AM - 3:00 PMSkills:Ability to work in a fast paced manufacturing environmentStrong attention to detailAbility to stand for 8-12 hoursBasic Mathematics and analytical skillsEducation:High SchoolExperience:1-4 yearsQualifications:Hand tools experience to include calipers, drop guage and inspection experience. CMM or OGP experience highly desired.To succeed in this role, you should have the following skills and experience? High School diploma or equivalent required? 3+ years? experience in Quality Control Inspection? Extensive experience utilizing tools such as micrometers, pin gauges, surface height indicator and digital and manual calipers.? Ability to read, engineering drawings, product specifications, receiving inspection plans, and test procedures.? Understand Zero Acceptance Sampling Plans using AQL sampling and 100% inspection.? Understanding of Geometric Dimensioning and Tolerancing (GD&T) and inspection techniques.? Ability to lift and work with parts or sub-assemblies weighing up to 50lbs? Strong computer abilities; web-based systems, Microsoft Office, Material and Document Control Software? Experience working within a government regulated environment, such as FDA, FAA or ISO? IPC 610 and IPC 620 Certifications (desired) Interested in this opportunity? Apply onlineBenefits offeredSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.For Colorado Residents Only: The hourly range for Colorado residents is $15.00 to $25.00/hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. In addition to your salary, Spherion offers a comprehensive benefits package, incentive and recognition program, and 401K contribution (all benefits are based on eligibility).
      We provide local staffing with a personal touch! Simply put, at Spherion we find people jobs and love what we do!Responsibilities:Perform a wide range of inspection, testing, and auditing in support of Manufacturing Operations and New Product Development. This requires knowledge of Geometric Dimensioning and Tolerancing, Quality System Regulations, various inspection methods, metrology and calibration fundamentals, sampling principals, and fundamental statistical methods. Inspector is required to perform inspections of parts and sub-assemblies, using close tolerances and inspection equipment.You are responsible for? Performing visual, dimensional, and functional inspections on consumable products, laser systems, subassemblies, fixtures, and raw material.? Utilizing various measuring equipment to determine component acceptance.? Perform First Article Inspections; gathering data and submitting reports.? Review DHRs and LHRs for Good Documentation Practices.? Interface with Engineering, Quality, and Production Teammates to communicate quality standards and address issues in a timely manner.? Control nonconforming material and assist in release of quarantine product; which includes: creating, verifying, and closing nonconforming reports.? Successfully work in and promote a team-oriented environment; reduce work area distractions.Working hours: 5:00 AM - 3:00 PMSkills:Ability to work in a fast paced manufacturing environmentStrong attention to detailAbility to stand for 8-12 hoursBasic Mathematics and analytical skillsEducation:High SchoolExperience:1-4 yearsQualifications:Hand tools experience to include calipers, drop guage and inspection experience. CMM or OGP experience highly desired.To succeed in this role, you should have the following skills and experience? High School diploma or equivalent required? 3+ years? experience in Quality Control Inspection? Extensive experience utilizing tools such as micrometers, pin gauges, surface height indicator and digital and manual calipers.? Ability to read, engineering drawings, product specifications, receiving inspection plans, and test procedures.? Understand Zero Acceptance Sampling Plans using AQL sampling and 100% inspection.? Understanding of Geometric Dimensioning and Tolerancing (GD&T) and inspection techniques.? Ability to lift and work with parts or sub-assemblies weighing up to 50lbs? Strong computer abilities; web-based systems, Microsoft Office, Material and Document Control Software? Experience working within a government regulated environment, such as FDA, FAA or ISO? IPC 610 and IPC 620 Certifications (desired) Interested in this opportunity? Apply onlineBenefits offeredSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.For Colorado Residents Only: The hourly range for Colorado residents is $15.00 to $25.00/hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. In addition to your salary, Spherion offers a comprehensive benefits package, incentive and recognition program, and 401K contribution (all benefits are based on eligibility).
      • Albert Lea, Minnesota
      • Temporary
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Temporary
      • $25.00 - $26.00 per hour
      • 2:00 PM - 10:00 PM
      Spherion Staffing has an Electronics Testing Technician position with John Deere in Fargo. This position will perform electrical/ mechanical testing, design validation, and verification of electronic or electro-mechanical equipment and products.Qualified candidates should have an A.S. in Electronics or a two-year technical diploma, and hands-on SMT soldering experience2nd shift 2 pm-10 pmPay $25-26/hour DOE All applicants must be legally authorized to work in the U.S. without sponsorshipResponsibilities: - Perform intermediate validation testing on prototypes and existing products- Work with Engineering to understand and apply defined test requirements - Troubleshoot defective lab equipment and provide required maintenance as needed Build intermediate test harnesses, loads, and circuit boards to support product verification as required- Document and maintain records relating to work performed- Inform supervisor of process, test, or design problems and assist in the corrective action- Assemble (mechanical/electrical) fixtures and test setups as required. This will require performing intermediate design functions- Perform inspection, test, and failure analysis as necessary to determine cause of defective tests or assemblies- Conduct functional test of electronic circuits and PCBs according to engineering instructions- Create test documentation when required for prototype products - Design basic engineering test boxesResponsibilities:See aboveWorking hours: 2:00 PM - 10:00 PMSkills:Requirements: -A.S. in Electronics or a two-year technical diploma, equivalent military certification or equivalent experience-Minimum of one year of related experience in electronics, manufacturing, or engineering-Hands-on SMT soldering experience-Must possess effective written and verbal communication skills-Working knowledge of computers, spreadsheets, and word processing-Understanding of manufacturing processes and electronic components-Knowledge of test equipment, e.g., multimeters, oscilloscopes, etc-Understanding of trouble shooting methodologies to identify root cause-Ability to read basic engineering documents-Ability to comprehend product/process component datasheets-Ability to assemble and disassemble products-Looking for candidates that can troubleshoot boards down to the component levelEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Tefehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has an Electronics Testing Technician position with John Deere in Fargo. This position will perform electrical/ mechanical testing, design validation, and verification of electronic or electro-mechanical equipment and products.Qualified candidates should have an A.S. in Electronics or a two-year technical diploma, and hands-on SMT soldering experience2nd shift 2 pm-10 pmPay $25-26/hour DOE All applicants must be legally authorized to work in the U.S. without sponsorshipResponsibilities: - Perform intermediate validation testing on prototypes and existing products- Work with Engineering to understand and apply defined test requirements - Troubleshoot defective lab equipment and provide required maintenance as needed Build intermediate test harnesses, loads, and circuit boards to support product verification as required- Document and maintain records relating to work performed- Inform supervisor of process, test, or design problems and assist in the corrective action- Assemble (mechanical/electrical) fixtures and test setups as required. This will require performing intermediate design functions- Perform inspection, test, and failure analysis as necessary to determine cause of defective tests or assemblies- Conduct functional test of electronic circuits and PCBs according to engineering instructions- Create test documentation when required for prototype products - Design basic engineering test boxesResponsibilities:See aboveWorking hours: 2:00 PM - 10:00 PMSkills:Requirements: -A.S. in Electronics or a two-year technical diploma, equivalent military certification or equivalent experience-Minimum of one year of related experience in electronics, manufacturing, or engineering-Hands-on SMT soldering experience-Must possess effective written and verbal communication skills-Working knowledge of computers, spreadsheets, and word processing-Understanding of manufacturing processes and electronic components-Knowledge of test equipment, e.g., multimeters, oscilloscopes, etc-Understanding of trouble shooting methodologies to identify root cause-Ability to read basic engineering documents-Ability to comprehend product/process component datasheets-Ability to assemble and disassemble products-Looking for candidates that can troubleshoot boards down to the component levelEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Tefehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Temporary
      • $17.00 per hour
      • 6:00 PM - 6:00 AM
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspectionsConducting Pre-Operational activitiesTesting and evaluating raw material and finished productWriting HOLD tags and assigning and/or assisting with the disposition of productReviewing finished production folders as part of the positive release programMust maintain department safety rules compliance and be a positive safety role model. Responsible for ensuring an organized, clean and safe work environment.Follow all Food safety practices and processes applicable to the department. Execute what is required by the company QMS.Monitor and maintain all food safety activities as part of daily tasks.Enforce food safety plan while producing product.Promote food safety and quality to all departmentsSupport and assist the manufacturing teams to meet customer and product quality performance requirements. Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionClear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.Working hours: 6:00 PM - 6:00 AMSkills:-Experience with Microsoft Office, including Excel, Outlook, and Word -Able to perform basic mathematical equations-Ability to adapt in a team and/or individual setting to allow achievement of company goals -Established communication, problem solving, and attention to detail skills-Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.-Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements-PCQI and HACCP certified desiredEducation:High SchoolExperience:0-1 yearsQualifications:HS DiplomaPassing Drug ScreenAbility to manage time and workload efficiently, and the ability to prioritize and modify priorities accordinglysafety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.Ability to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.Demonstrated ability to work and develop others in a team environment Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplaceAbility and willingness to learn, practice, and improve documented work proceduresDemonstrated ability to function in a fast-paced environment Verbal and written commun
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspectionsConducting Pre-Operational activitiesTesting and evaluating raw material and finished productWriting HOLD tags and assigning and/or assisting with the disposition of productReviewing finished production folders as part of the positive release programMust maintain department safety rules compliance and be a positive safety role model. Responsible for ensuring an organized, clean and safe work environment.Follow all Food safety practices and processes applicable to the department. Execute what is required by the company QMS.Monitor and maintain all food safety activities as part of daily tasks.Enforce food safety plan while producing product.Promote food safety and quality to all departmentsSupport and assist the manufacturing teams to meet customer and product quality performance requirements. Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionClear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.Working hours: 6:00 PM - 6:00 AMSkills:-Experience with Microsoft Office, including Excel, Outlook, and Word -Able to perform basic mathematical equations-Ability to adapt in a team and/or individual setting to allow achievement of company goals -Established communication, problem solving, and attention to detail skills-Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.-Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements-PCQI and HACCP certified desiredEducation:High SchoolExperience:0-1 yearsQualifications:HS DiplomaPassing Drug ScreenAbility to manage time and workload efficiently, and the ability to prioritize and modify priorities accordinglysafety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.Ability to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.Demonstrated ability to work and develop others in a team environment Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplaceAbility and willingness to learn, practice, and improve documented work proceduresDemonstrated ability to function in a fast-paced environment Verbal and written commun
      • Albert Lea, Minnesota
      • Temporary
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Draper, Utah
      • Temporary
      • $24.00 per hour
      • 7:00 AM - 5:30 PM
      Calibration Technician -12 month contract positionResponsibilities:o Test, calibrate or coordinate measuring instruments and equipment for conformance to established standards or calibration instructions. Equipment will vary based on the business operations. Assist document controller to maintain and distribute controlled copies of latest approved document.o Maintain the calibration system and assists in other calibration activities.o Establish and maintain procedures to complete in-house calibrationso Maintain calibration database and records including generating monthly reports where necessary.o Coordinate outside services to complete calibration activities.o Maintain records to ensure compliance to GMP/ISO requirements and support internal/external audit of the calibration department.o Interface with other departments concerning measuring and inspection guidance when required.o Responsible for tracking all calibrations electronically.o Maintain the instrument and equipment calibration files.o Work with outside vendors to schedule and perform external calibrations.o May write calibration procedures for new plant instruments and equipment.o Revise existing calibration procedures as needed.o Plan sequence of testing and calibration procedures for instruments and equipment.o Maintain accurate and up-to-date calibration records. Enter new equipment information into the master schedule to ensure files are created and routine calibration work orders are created prior to the expiration of calibration. Must be capable of operating a personal computer (PC), familiar with Windows formatted software, and sufficiently familiar with computer operations to be field trained to proficiency in a minimal amount of time.o Assist engineers in formulating test, calibration, repair, and evaluation plans and procedures to maintain precision accuracy of measuring, recording, and indicating instruments and equipment.o Make sure controlled copies of latest approved documents and drawings are distribute to the correct department and personnel.o Maintain updated records of all controlled copies of latest approved documents and drawings and their distribution.o Must have previous calibration experience.o Reviews production data for Good Documentation Practices compliance, accuracy, and completeness.o May perform other Quality Department tasks as required.Working hours: 7:00 AM - 5:30 PMSkills:ability to establish and maintain company procedures -adhere to compliance for GMP/ISO requirementsEducation:No Degree RequiredExperience:1-4 yearsQualifications:available to work a one year contract, Mon-Thur from 7 a.m.-5:30 p.m. Please call or text the keyword "contract" to 801/261-8880 to apply todaySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Calibration Technician -12 month contract positionResponsibilities:o Test, calibrate or coordinate measuring instruments and equipment for conformance to established standards or calibration instructions. Equipment will vary based on the business operations. Assist document controller to maintain and distribute controlled copies of latest approved document.o Maintain the calibration system and assists in other calibration activities.o Establish and maintain procedures to complete in-house calibrationso Maintain calibration database and records including generating monthly reports where necessary.o Coordinate outside services to complete calibration activities.o Maintain records to ensure compliance to GMP/ISO requirements and support internal/external audit of the calibration department.o Interface with other departments concerning measuring and inspection guidance when required.o Responsible for tracking all calibrations electronically.o Maintain the instrument and equipment calibration files.o Work with outside vendors to schedule and perform external calibrations.o May write calibration procedures for new plant instruments and equipment.o Revise existing calibration procedures as needed.o Plan sequence of testing and calibration procedures for instruments and equipment.o Maintain accurate and up-to-date calibration records. Enter new equipment information into the master schedule to ensure files are created and routine calibration work orders are created prior to the expiration of calibration. Must be capable of operating a personal computer (PC), familiar with Windows formatted software, and sufficiently familiar with computer operations to be field trained to proficiency in a minimal amount of time.o Assist engineers in formulating test, calibration, repair, and evaluation plans and procedures to maintain precision accuracy of measuring, recording, and indicating instruments and equipment.o Make sure controlled copies of latest approved documents and drawings are distribute to the correct department and personnel.o Maintain updated records of all controlled copies of latest approved documents and drawings and their distribution.o Must have previous calibration experience.o Reviews production data for Good Documentation Practices compliance, accuracy, and completeness.o May perform other Quality Department tasks as required.Working hours: 7:00 AM - 5:30 PMSkills:ability to establish and maintain company procedures -adhere to compliance for GMP/ISO requirementsEducation:No Degree RequiredExperience:1-4 yearsQualifications:available to work a one year contract, Mon-Thur from 7 a.m.-5:30 p.m. Please call or text the keyword "contract" to 801/261-8880 to apply todaySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.