Thank you for subscribing to your personalized job alerts.

    55 jobs found in waseca, minnesota

    Filter3
    Clear all
      • Owatonna, Minnesota
      • Permanent
      • $17.00 - $19.00 per hour
      • Various Shifts Available
      Assist with the set-up and operate all die casting machines and trim presses, in the efficient and safe production of qualityzinc parts.Responsibilities:Operate (manually or automatically) die casting machine and trim press to produce the required number of quality parts foreach order. May assist in having tooling and gaging pre-set, pre-staged and ready to deliver to machine prior to set up.Assist with set up of die casting machines and automatic extractors so they function properly in the production of quality zincparts. - Clean machine, inspect and mount new die in the proper manner, make necessary hookups and settings, proceed tomake first shot together with necessary adjustments for the desired quality of a zinc part. - Obtain approval from Lead forproduction run. Routinely check the quality of parts run. Set up trim tools and operate trim press for die cast parts not selftrimmed by machine and make routine quality checks on parts trimmed. 6. Maintain accurate production records. Understandand may operate other die casting machines, trim presses and support equipment in the department as production requiresor during machine breakdowns. May fill in for Pot Tender as work load requires. Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Inspect parts coming off the die cast machine and trim press to determine if quality standards are met. Errors in judgementmay not be detected until they have caused noticeable costs in time and money.Education:High SchoolExperience:0-1 yearsQualifications:Mechanical aptitude is necessary in setting up and operating die casting machines, trimmers, pots and support equipment.Skill in working with common hand tools. High School graduate or GED. On the job training to learn the setups, adjustments,and operating requirements of the various die casting machines and trimmers. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Assist with the set-up and operate all die casting machines and trim presses, in the efficient and safe production of qualityzinc parts.Responsibilities:Operate (manually or automatically) die casting machine and trim press to produce the required number of quality parts foreach order. May assist in having tooling and gaging pre-set, pre-staged and ready to deliver to machine prior to set up.Assist with set up of die casting machines and automatic extractors so they function properly in the production of quality zincparts. - Clean machine, inspect and mount new die in the proper manner, make necessary hookups and settings, proceed tomake first shot together with necessary adjustments for the desired quality of a zinc part. - Obtain approval from Lead forproduction run. Routinely check the quality of parts run. Set up trim tools and operate trim press for die cast parts not selftrimmed by machine and make routine quality checks on parts trimmed. 6. Maintain accurate production records. Understandand may operate other die casting machines, trim presses and support equipment in the department as production requiresor during machine breakdowns. May fill in for Pot Tender as work load requires. Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Inspect parts coming off the die cast machine and trim press to determine if quality standards are met. Errors in judgementmay not be detected until they have caused noticeable costs in time and money.Education:High SchoolExperience:0-1 yearsQualifications:Mechanical aptitude is necessary in setting up and operating die casting machines, trimmers, pots and support equipment.Skill in working with common hand tools. High School graduate or GED. On the job training to learn the setups, adjustments,and operating requirements of the various die casting machines and trimmers. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $16.00 - $18.00 per hour
      • Various Shifts Available
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: Various Shifts AvailableSkills:Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:0-1 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: Various Shifts AvailableSkills:Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:0-1 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $20.00 - $22.00 per hour
      • Various Shifts Available
      Set up and operate department machines to perform hobbing, induction heat treating, Plus associated equipment, inaccordance with established production and quality standards.Responsibilities:Operate machine in performing required operations in accordance with established production and quality standards.Perform required machine setups consistent with machine and product specifications; changes tools, cutters, fixtures, etc.Use gauges to check certain parts to assure they conform to quality and engineering blueprints and specifications.Make machine adjustments and tool changes as necessary to correct or maintain product quality.Clean machine and work area and assure proper lubricants and coolants are adequately applied to machine.Make minor machine repairs and notify Lead of machine malfunctions.Order parts and benchstock as required.Maintain accurate production records and fill out work order for completed orders.Review and interpret dispatch list for work to be done and due dates.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Problem Solving and Decision Making - Determine appropriate setup for product being manufactured. Assure sufficientcoolant and lubricant is applied to machine. Determine tooling wear and the need for replacement. Determine when machineadjustments or repairs are required. Determine if parts meet quality standards. Errors in judgment may be detected insubsequent steps or not until they have caused noticeable costs in time or money.Relations with Others - Interacts with other machine operators, Lead in department, Inspection personnel, MaterialHandlers and Tool and Die Maintenance personnel. The incumbent may participate in small group activities such as taskteams, safety meetings and other improvement efforts.Learning Period - At least two months is required to learn the basics of the job. To handle all aspects of the job withminimum supervision takes two years or more.Education:High SchoolExperience:1-4 yearsQualifications:Skills/Abilities - Read shop orders and all associated documents, above average mechanical aptitude, using measuringdevices and hand tools, and work independently. Must be fluent in the English language, both written and spoken.Training and Experience - Machine setup and operation. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set up and operate department machines to perform hobbing, induction heat treating, Plus associated equipment, inaccordance with established production and quality standards.Responsibilities:Operate machine in performing required operations in accordance with established production and quality standards.Perform required machine setups consistent with machine and product specifications; changes tools, cutters, fixtures, etc.Use gauges to check certain parts to assure they conform to quality and engineering blueprints and specifications.Make machine adjustments and tool changes as necessary to correct or maintain product quality.Clean machine and work area and assure proper lubricants and coolants are adequately applied to machine.Make minor machine repairs and notify Lead of machine malfunctions.Order parts and benchstock as required.Maintain accurate production records and fill out work order for completed orders.Review and interpret dispatch list for work to be done and due dates.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Problem Solving and Decision Making - Determine appropriate setup for product being manufactured. Assure sufficientcoolant and lubricant is applied to machine. Determine tooling wear and the need for replacement. Determine when machineadjustments or repairs are required. Determine if parts meet quality standards. Errors in judgment may be detected insubsequent steps or not until they have caused noticeable costs in time or money.Relations with Others - Interacts with other machine operators, Lead in department, Inspection personnel, MaterialHandlers and Tool and Die Maintenance personnel. The incumbent may participate in small group activities such as taskteams, safety meetings and other improvement efforts.Learning Period - At least two months is required to learn the basics of the job. To handle all aspects of the job withminimum supervision takes two years or more.Education:High SchoolExperience:1-4 yearsQualifications:Skills/Abilities - Read shop orders and all associated documents, above average mechanical aptitude, using measuringdevices and hand tools, and work independently. Must be fluent in the English language, both written and spoken.Training and Experience - Machine setup and operation. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.00 - $19.00 per hour
      • Various Shifts Available
      Set up and operate department machines to perform hobbing, induction heat treating, Plus associated equipment, inaccordance with established production and quality standards.Responsibilities:Operate machine in performing required operations in accordance with established production and quality standards.Perform required machine setups consistent with machine and product specifications; changes tools, cutters, fixtures, etc.Use gauges to check certain parts to assure they conform to quality and engineering blueprints and specifications.Make machine adjustments and tool changes as necessary to correct or maintain product quality.Clean machine and work area and assure proper lubricants and coolants are adequately applied to machine.Make minor machine repairs and notify Lead of machine malfunctions.Order parts and benchstock as required.Maintain accurate production records and fill out work order for completed orders.Review and interpret dispatch list for work to be done and due dates.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Problem Solving and Decision Making - Determine appropriate setup for product being manufactured. Assure sufficientcoolant and lubricant is applied to machine. Determine tooling wear and the need for replacement. Determine when machineadjustments or repairs are required. Determine if parts meet quality standards. Errors in judgment may be detected insubsequent steps or not until they have caused noticeable costs in time or money.Relations with Others - Interacts with other machine operators, Lead in department, Inspection personnel, MaterialHandlers and Tool and Die Maintenance personnel. The incumbent may participate in small group activities such as taskteams, safety meetings and other improvement efforts.Learning Period - At least two months is required to learn the basics of the job. To handle all aspects of the job withminimum supervision takes two years or more.Education:High SchoolExperience:0-1 yearsQualifications:Skills/Abilities - Read shop orders and all associated documents, above average mechanical aptitude, using measuringdevices and hand tools, and work independently. Must be fluent in the English language, both written and spoken.Training and Experience - Machine setup and operation. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set up and operate department machines to perform hobbing, induction heat treating, Plus associated equipment, inaccordance with established production and quality standards.Responsibilities:Operate machine in performing required operations in accordance with established production and quality standards.Perform required machine setups consistent with machine and product specifications; changes tools, cutters, fixtures, etc.Use gauges to check certain parts to assure they conform to quality and engineering blueprints and specifications.Make machine adjustments and tool changes as necessary to correct or maintain product quality.Clean machine and work area and assure proper lubricants and coolants are adequately applied to machine.Make minor machine repairs and notify Lead of machine malfunctions.Order parts and benchstock as required.Maintain accurate production records and fill out work order for completed orders.Review and interpret dispatch list for work to be done and due dates.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Problem Solving and Decision Making - Determine appropriate setup for product being manufactured. Assure sufficientcoolant and lubricant is applied to machine. Determine tooling wear and the need for replacement. Determine when machineadjustments or repairs are required. Determine if parts meet quality standards. Errors in judgment may be detected insubsequent steps or not until they have caused noticeable costs in time or money.Relations with Others - Interacts with other machine operators, Lead in department, Inspection personnel, MaterialHandlers and Tool and Die Maintenance personnel. The incumbent may participate in small group activities such as taskteams, safety meetings and other improvement efforts.Learning Period - At least two months is required to learn the basics of the job. To handle all aspects of the job withminimum supervision takes two years or more.Education:High SchoolExperience:0-1 yearsQualifications:Skills/Abilities - Read shop orders and all associated documents, above average mechanical aptitude, using measuringdevices and hand tools, and work independently. Must be fluent in the English language, both written and spoken.Training and Experience - Machine setup and operation. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $15.00 - $17.50 per hour
      • Various Shifts Available
      Assemble finished window hardware products for shipment to customer, according to output plan, while maintaining qualitystandards.Responsibilities:Assemble metal parts: a. May walk to producing area to get pan of parts for assembly and complete necessary paperwork.b. Read order to verify parts are correct. c. Check quality of components before assembling by referring to written standardsfor quality control and/or blueprints. d. Record daily individual or work center production quantity on Production Board and inred book. e. Inspects final assembly by referring to written criteria. f. Assemble boxes for final packing of product.May assist in machine set-up as necessary.Assist in training department personnel with operations and procedures.Meets briefly with following shift to communicate problems, possible solutions and issues requiring attention.- May make minor adjustments to machines to keep them in working order.- May act as back-up Material Handler, as necessary.- May occasionally check and approve work of temporary personnel.- May stock parts at work center and stack finished goods on pallet.- May perform minor preventive maintenance on machinery.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Learn to read blueprints, operate assembly equipment and use computer to verify informationEducation:No Degree RequiredExperience:0-1 yearsQualifications:Supervision Received - Under regular supervision, only exceptional or unusual tasks are fully checked, normal tasks arespot-checked on a regular basis, generally daily. Assignments are specific, incumbent uses standardized methods tocomplete.Problem solving and Decision Making - Assesses parts to determine if they meet quality standards, if they do not, mayshut down machine and notify Lead.Relations with Others - Interacts with personnel from Assembly area, Plating, Punch Press and Maintenance. Mayparticipate in small group activities such as Quality Circles, task teams, safety meetings and other improvement efforts.Learning Period - The basics of working in the Assembly area can be learned in two to three weeks. To handle all aspectsof the job with minimal supervision requires six to nine months of on-the-job training. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Assemble finished window hardware products for shipment to customer, according to output plan, while maintaining qualitystandards.Responsibilities:Assemble metal parts: a. May walk to producing area to get pan of parts for assembly and complete necessary paperwork.b. Read order to verify parts are correct. c. Check quality of components before assembling by referring to written standardsfor quality control and/or blueprints. d. Record daily individual or work center production quantity on Production Board and inred book. e. Inspects final assembly by referring to written criteria. f. Assemble boxes for final packing of product.May assist in machine set-up as necessary.Assist in training department personnel with operations and procedures.Meets briefly with following shift to communicate problems, possible solutions and issues requiring attention.- May make minor adjustments to machines to keep them in working order.- May act as back-up Material Handler, as necessary.- May occasionally check and approve work of temporary personnel.- May stock parts at work center and stack finished goods on pallet.- May perform minor preventive maintenance on machinery.Perform other duties as assigned.Working hours: Various Shifts AvailableSkills:Learn to read blueprints, operate assembly equipment and use computer to verify informationEducation:No Degree RequiredExperience:0-1 yearsQualifications:Supervision Received - Under regular supervision, only exceptional or unusual tasks are fully checked, normal tasks arespot-checked on a regular basis, generally daily. Assignments are specific, incumbent uses standardized methods tocomplete.Problem solving and Decision Making - Assesses parts to determine if they meet quality standards, if they do not, mayshut down machine and notify Lead.Relations with Others - Interacts with personnel from Assembly area, Plating, Punch Press and Maintenance. Mayparticipate in small group activities such as Quality Circles, task teams, safety meetings and other improvement efforts.Learning Period - The basics of working in the Assembly area can be learned in two to three weeks. To handle all aspectsof the job with minimal supervision requires six to nine months of on-the-job training. $1,500 BONUS; $500.00 ON VERY FIRST PAYCHECK!APPLY TODAY and be DIRECTLY HIRED for one of the 100 + jobs available on all shifts. Refer a friend to be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $32.00 - $38.00 per hour
      • 8:00 AM - 5:00 PM
      Develop, interpret, edit REST Interface ScriptsCreate Web interfaces for MS SQL DatabasesDevelop, edit/modify various reports based on production requirements* This assignment is expected to last for 6-months.Responsibilities:Support production in data collection & acquisitionSupport and maintain current KPI reportsWorking hours: 8:00 AM - 5:00 PM or 9:00 - 6:00 PMSkills:API experience (preferably with REST protocol & standard)SAP knowledge & experience is a plusSQL preferredEducation:BachelorsExperience:1-4 yearsQualifications:Programming skills requiredExperience creating/developing reports using Microsoft Power BI Contact us at 507-451-3400 with any additional questionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Develop, interpret, edit REST Interface ScriptsCreate Web interfaces for MS SQL DatabasesDevelop, edit/modify various reports based on production requirements* This assignment is expected to last for 6-months.Responsibilities:Support production in data collection & acquisitionSupport and maintain current KPI reportsWorking hours: 8:00 AM - 5:00 PM or 9:00 - 6:00 PMSkills:API experience (preferably with REST protocol & standard)SAP knowledge & experience is a plusSQL preferredEducation:BachelorsExperience:1-4 yearsQualifications:Programming skills requiredExperience creating/developing reports using Microsoft Power BI Contact us at 507-451-3400 with any additional questionsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $13.00 per hour
      • 6:00 AM - 2:30 PM
      Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assemblyMaintain a clean and safe workspaceLight material handlingGeneral assembly functionsUse of hand toolsAll other duties as assigned by your managerWorking hours: 6:00 AM - 2:30 PMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAYSpherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assemblyMaintain a clean and safe workspaceLight material handlingGeneral assembly functionsUse of hand toolsAll other duties as assigned by your managerWorking hours: 6:00 AM - 2:30 PMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAYSpherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $13.50 per hour
      • 2:30 PM - 1:00 AM
      Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assembly.All other duties as assigned by your manager. ValuesWorking hours: 2:30 PM - 1:00 AMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assembly.All other duties as assigned by your manager. ValuesWorking hours: 2:30 PM - 1:00 AMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $15.00 per hour
      • 7:00 AM - 3:00 PM
      ***DIRECT HIRE*** $1,500.00 SIGN ON BONUS, $500.00 ON FIRST PAYCHECKFor assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:0-1 yearsQualifications:Qualifications / Prior ExperienceLearning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts.Work Environment / Other RequirementsEquipment Operated - Process and quality testing equipment, weigh scales, computer, R&T clocks, various small hand toolsand material movement equipment. Moderate care is required to prevent damage to equipmentWorking Conditions and Hazards - General working conditions are good. Exposed to hazards of machine operation andminimal exposure to fumes from coating operation. Safety equipment required consists of gloves, safety shoes, safetyglasses with side shields, and other PPE safety devices as required. Body jewelry and rings must be post style only. Wearingof rings is not permitted at the
      ***DIRECT HIRE*** $1,500.00 SIGN ON BONUS, $500.00 ON FIRST PAYCHECKFor assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:No Degree RequiredExperience:0-1 yearsQualifications:Qualifications / Prior ExperienceLearning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts.Work Environment / Other RequirementsEquipment Operated - Process and quality testing equipment, weigh scales, computer, R&T clocks, various small hand toolsand material movement equipment. Moderate care is required to prevent damage to equipmentWorking Conditions and Hazards - General working conditions are good. Exposed to hazards of machine operation andminimal exposure to fumes from coating operation. Safety equipment required consists of gloves, safety shoes, safetyglasses with side shields, and other PPE safety devices as required. Body jewelry and rings must be post style only. Wearingof rings is not permitted at the
      • Mankato, Minnesota
      • Temp to Perm
      • $15.00 per hour
      • 3:30 PM - 2:00 AM
      Jobs! Jobs! Jobs! Did you know, Spherion has partned with a fabulous electronics manufacturer right here in Mankato; we are seeking out both skilled and entry-level assemblers to work on their afternoon shift. This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 3:30 PM - 2:00 AMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Jobs! Jobs! Jobs! Did you know, Spherion has partned with a fabulous electronics manufacturer right here in Mankato; we are seeking out both skilled and entry-level assemblers to work on their afternoon shift. This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 3:30 PM - 2:00 AMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $14.00 per hour
      • 7:00 AM - 3:30 PM
      Spherion has partned with a fabulous electronics manufacturer; we are seeking out both skilled and entry-llevel assemblers to work on days! This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 7:00 AM - 3:30 PMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has partned with a fabulous electronics manufacturer; we are seeking out both skilled and entry-llevel assemblers to work on days! This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 7:00 AM - 3:30 PMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 7:30 AM - 4:00 PM
      You know us, it's Spherion; we are looking for motivated individuals with an interest in working in electronics manufacturing! We need a receiving inspector; the position of Receiving Inspector will inspect components for conformance to technical specification and record information. This manufacturing plant is top notch -- Don't miss out on this opportunity!Responsibilities:Responsible for safe and efficient operation of the electronic assembly materials/equipment.Must follow all company policies outlines in the EI Microcircuits Employee Handbook of Personnel Policies.Ensure that safety is being maintained in the department.All other duties as assigned by your supervisor/manager.Working hours: 7:30 AM - 4:00 PMSkills:Job requires standing and walking the majority of the day.Will carry racks or totes weighing up to 10 pounds.Ability to grasp and hold assemblies and place them in and out of racks, totes or brackets.Basic computer knowledgeEducation:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to work with technical data sheets, engineering drawings, specifications, and ECO???s.Motivated and willing to learn.Strong mechanical aptitude and close attention to detail.Ability to keep up in a fast-paced work environment.Basic computer skills required.Must be able to read, write, communicate, and comprehend the English language.Must be able to read, write, communicate, and comprehend the English language.Good employment history.Must be able to work and get along with others ? must be a team player.Good visual acuity.Good eye to hand coordination. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      You know us, it's Spherion; we are looking for motivated individuals with an interest in working in electronics manufacturing! We need a receiving inspector; the position of Receiving Inspector will inspect components for conformance to technical specification and record information. This manufacturing plant is top notch -- Don't miss out on this opportunity!Responsibilities:Responsible for safe and efficient operation of the electronic assembly materials/equipment.Must follow all company policies outlines in the EI Microcircuits Employee Handbook of Personnel Policies.Ensure that safety is being maintained in the department.All other duties as assigned by your supervisor/manager.Working hours: 7:30 AM - 4:00 PMSkills:Job requires standing and walking the majority of the day.Will carry racks or totes weighing up to 10 pounds.Ability to grasp and hold assemblies and place them in and out of racks, totes or brackets.Basic computer knowledgeEducation:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to work with technical data sheets, engineering drawings, specifications, and ECO???s.Motivated and willing to learn.Strong mechanical aptitude and close attention to detail.Ability to keep up in a fast-paced work environment.Basic computer skills required.Must be able to read, write, communicate, and comprehend the English language.Must be able to read, write, communicate, and comprehend the English language.Good employment history.Must be able to work and get along with others ? must be a team player.Good visual acuity.Good eye to hand coordination. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Center, Minnesota
      • Temp to Perm
      • $14.00 per hour
      • 6:00 AM - 2:00 PM
      We love coffee, allllllllll of the coffee, and if you do too, then maybe we should discuss this job opportunity! Spherion in partnership with our client in Le Center, MN is looking for coffee roasters. Make what you LOVE and get a little discount as well, talk about having your cake and eating it too! It's the BEST!Responsibilities:Roasting coffee to customer specificationsDaily inventoryRoaster cleaning and basic maintenanceKeep roasting area cleanGrind coffee to customer specifications Keep production informed of low green coffeePull green coffee beans to be roastedRecording batch information for each roastOperate within standard operating proceduresOperate forklift and pallet jackWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to lift 30-70lbs frequently in a safe manner.Able to push/pull 70+ poundsAble to work overtime with no noticeAble to multi-taskAble to stand for an 8+ hour shift If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We love coffee, allllllllll of the coffee, and if you do too, then maybe we should discuss this job opportunity! Spherion in partnership with our client in Le Center, MN is looking for coffee roasters. Make what you LOVE and get a little discount as well, talk about having your cake and eating it too! It's the BEST!Responsibilities:Roasting coffee to customer specificationsDaily inventoryRoaster cleaning and basic maintenanceKeep roasting area cleanGrind coffee to customer specifications Keep production informed of low green coffeePull green coffee beans to be roastedRecording batch information for each roastOperate within standard operating proceduresOperate forklift and pallet jackWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to lift 30-70lbs frequently in a safe manner.Able to push/pull 70+ poundsAble to work overtime with no noticeAble to multi-taskAble to stand for an 8+ hour shift If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Center, Minnesota
      • Temp to Perm
      • $14.00 per hour
      • 6:00 AM - 2:00 PM
      Is there any better smell than roasted coffee beans? If you love that smell, this position would be right up your alley! Spherion in partnership with their client in Le Center, MN is looking for packagers, bulk packagers. Help make what you LOVE and get a little discount as well, talk about having your cake and eating it too!Responsibilities:Reads work orders to determine what items must be gathered.Pulls customer orders from stock and places orders in appropriate shipping areaWraps protective material around product.Weighs product and adjusts quantity.Folds and/or tapes to seal bags/boxes.Labels products.Packs special arrangements or selections of product.Inspects materials, products, and containers at each step of packaging process.Uses computer to record information such as weight and date packaged.Be mindful of and adhere to GMP?s, Quality and Food Safety requirements.Be able to successfully identify when quality control measures are needed and follow through as required.Strict adherence to all company policies, procedures and safety rules.Detailed orientedWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:At minimum, a High School Diploma (or an equivalent such as a GED) is required.Attention to detail in a fast paced environment.Ability to read, write and interpret basic correspondence in English.Basic computer experience, including Microsoft excel and Word.Consistent and punctual attendance.Able to lift 30 to 50lbs frequently in a safe manner.Ability to successfully complete the pre-employment process. If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Is there any better smell than roasted coffee beans? If you love that smell, this position would be right up your alley! Spherion in partnership with their client in Le Center, MN is looking for packagers, bulk packagers. Help make what you LOVE and get a little discount as well, talk about having your cake and eating it too!Responsibilities:Reads work orders to determine what items must be gathered.Pulls customer orders from stock and places orders in appropriate shipping areaWraps protective material around product.Weighs product and adjusts quantity.Folds and/or tapes to seal bags/boxes.Labels products.Packs special arrangements or selections of product.Inspects materials, products, and containers at each step of packaging process.Uses computer to record information such as weight and date packaged.Be mindful of and adhere to GMP?s, Quality and Food Safety requirements.Be able to successfully identify when quality control measures are needed and follow through as required.Strict adherence to all company policies, procedures and safety rules.Detailed orientedWorking hours: 6:00 AM - 2:00 PMSkills:Experience in solving problems and finding solutions.Independent work ethic and able to work on a team.Able to read, write and communicate in English and comprehend instructions.Attention to detail in a fast-paced environment.Experience with Outlook and Excel is preferred.Basic math skills required.Education:No Degree RequiredExperience:0-1 yearsQualifications:At minimum, a High School Diploma (or an equivalent such as a GED) is required.Attention to detail in a fast paced environment.Ability to read, write and interpret basic correspondence in English.Basic computer experience, including Microsoft excel and Word.Consistent and punctual attendance.Able to lift 30 to 50lbs frequently in a safe manner.Ability to successfully complete the pre-employment process. If you're an early riser and this job interests you, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $17.00 per hour
      • 3:30 PM - 2:00 AM
      Oh hi! We are looking for motivated individuals with an interest in working in electronics manufacturing! Spherion in partnership with our client has SMT operating positions available, full-time, temp-to-hire! This manufacturing plant is top notch -- new, bright, clean and AWESOME! Don't miss out on this opportunity!Responsibilities:. Reporting to the area lead person (SMT Supervisor when needed.). Responsible for safe and efficient operation of the electronic component surface mount pick-n- place robots.. Must conform with all ISO 9001 procedures.. Must follow all company policies outlines in the Employee Handbook.. Following all processes and procedures outlines in the ISO 9000 Manual.. Proper completion of all necessary paperwork. This includes maintaining accurate records of the machine on the machine log sheet, using the correct operation numbers, and making sure that the paperwork is scanned.. Responsible for boards they are inspecting.. Responsible for boards being produced off their line. Boards must: have as good of placement as possible, not be short parts, must have correct part polarity and also correct parts.Working hours: 3:30 PM - 2:00 AMSkills:Must be able to read, write, communicate, and comprehend the English language.Bill of material and print reading.Component identification.Reading and comprehension of component part markings and polarity.Basic computer knowledgeEducation:No Degree RequiredExperience:0-1 yearsQualifications:. Must be able to lift 20 lbs.. Ability to be on feet for 8 hours per day. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Oh hi! We are looking for motivated individuals with an interest in working in electronics manufacturing! Spherion in partnership with our client has SMT operating positions available, full-time, temp-to-hire! This manufacturing plant is top notch -- new, bright, clean and AWESOME! Don't miss out on this opportunity!Responsibilities:. Reporting to the area lead person (SMT Supervisor when needed.). Responsible for safe and efficient operation of the electronic component surface mount pick-n- place robots.. Must conform with all ISO 9001 procedures.. Must follow all company policies outlines in the Employee Handbook.. Following all processes and procedures outlines in the ISO 9000 Manual.. Proper completion of all necessary paperwork. This includes maintaining accurate records of the machine on the machine log sheet, using the correct operation numbers, and making sure that the paperwork is scanned.. Responsible for boards they are inspecting.. Responsible for boards being produced off their line. Boards must: have as good of placement as possible, not be short parts, must have correct part polarity and also correct parts.Working hours: 3:30 PM - 2:00 AMSkills:Must be able to read, write, communicate, and comprehend the English language.Bill of material and print reading.Component identification.Reading and comprehension of component part markings and polarity.Basic computer knowledgeEducation:No Degree RequiredExperience:0-1 yearsQualifications:. Must be able to lift 20 lbs.. Ability to be on feet for 8 hours per day. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 7:30 AM - 4:00 PM
      You know us, it's Spherion; we are looking for motivated individuals with an interest in working in electronics manufacturing! Spherion in partnership with our client has wash operating available, full-time, temp-to-hire! This manufacturing plant is top notch -- Don't miss out on this opportunity!Responsibilities:To perform a variety of general assembly steps.Basketing, washing and performing cleanliness testing to product.Ability to use hand or power tools.And all other duties as assigned by your manager.Working hours: 7:30 AM - 4:00 PMSkills:Job requires standing and walking the majority of the day.Will carry racks or totes weighing up to 10 pounds.Ability to grasp and hold assemblies and place them in and out of racks, totes or brackets.Basic computer knowledgeEducation:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read, write, communicate, and comprehend the English language.Good employment history.Must be able to work and get along with others ? must be a team player.Good visual acuity.Good eye to hand coordination. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      You know us, it's Spherion; we are looking for motivated individuals with an interest in working in electronics manufacturing! Spherion in partnership with our client has wash operating available, full-time, temp-to-hire! This manufacturing plant is top notch -- Don't miss out on this opportunity!Responsibilities:To perform a variety of general assembly steps.Basketing, washing and performing cleanliness testing to product.Ability to use hand or power tools.And all other duties as assigned by your manager.Working hours: 7:30 AM - 4:00 PMSkills:Job requires standing and walking the majority of the day.Will carry racks or totes weighing up to 10 pounds.Ability to grasp and hold assemblies and place them in and out of racks, totes or brackets.Basic computer knowledgeEducation:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to read, write, communicate, and comprehend the English language.Good employment history.Must be able to work and get along with others ? must be a team player.Good visual acuity.Good eye to hand coordination. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 2:30 PM - 1:00 AM
      A leader in portable and permanent power distribution solutions. The Grinder and Saw Operators will be responsible for grinding and saw operation on electrical boxes.Responsibilities:Grinding and Saw Operating Read and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific grinding and saw toolsPerform other duties and projects as assignedWorking hours: 2:30 PM - 1:00 AMSkills:-Ability to read instructions, safely operate machines and visually inspect parts produced-Accuracy and timeliness in completion of work assignments is a must-Excellent communication skills-Frequent lifting, standing, and bending required-Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts-Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices VERY CLEAN, NEW, ORGANIZED, TEMPERATURE CONTRILLED, FRIENDLY FACILITY. Permanent Positions. We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A leader in portable and permanent power distribution solutions. The Grinder and Saw Operators will be responsible for grinding and saw operation on electrical boxes.Responsibilities:Grinding and Saw Operating Read and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific grinding and saw toolsPerform other duties and projects as assignedWorking hours: 2:30 PM - 1:00 AMSkills:-Ability to read instructions, safely operate machines and visually inspect parts produced-Accuracy and timeliness in completion of work assignments is a must-Excellent communication skills-Frequent lifting, standing, and bending required-Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts-Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices VERY CLEAN, NEW, ORGANIZED, TEMPERATURE CONTRILLED, FRIENDLY FACILITY. Permanent Positions. We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 per hour
      • 6:00 AM - 6:00 PM
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $20.95 per hour
      • 6:00 PM - 6:00 AM
      Ensure that all back end equipment from the end of the washer/dryer through the pallet staging area is maintained and operating to produce cans which meet quality specifications.Responsibilities:? Perform set-up and maintenance and ensure efficient operation of the flangers, beaders, light testers, lacquer spray machines, IBOs, palletizer and strappers.?Responsible for the maintenance and set up of all back end conveying, which includes all single filers and can transfer apparatus.?At scheduled intervals, inspect, monitor and document in the computer the following can specifications:-Flanged can height-Factory finished can height-Flange width-Flange angle-Axial load-Panel resistance-Bead depth-Rolling bead diameter and placement-Plug diameter -Oven temperature checks?Perform visual checks of cans to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found.?Complete required paperwork and documentation such as process check sheets, log books, and maintenance check sheets.?Perform Equipment Set-up Evaluations (ESE) and make proper adjustments as required.?Assist in other areas as needed to maintain a smooth flow of cans through the plant.?Maintain cleanliness of all work areas and follow all safety procedures and work practices.?Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:--Strong problem solving skills through an individual and/or collaborative approach--Ability to work independently or with a team--Must be able to look at new solutions and "think outside the box"Education:High SchoolExperience:0-1 yearsQualifications:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements?High School Education/GED ?Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).?Thorough knowledge and understanding of can and end manufacturing process, equipment, and quality specifications.?Ability to demonstrate strong mechanical aptitude on all can and end making equipment in the plant, depending on the primary area of responsibility assigned.?Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions. ?Basic knowledge of computer systems, gauges, tools and equipment.?Ability to safely operate production forklift. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Ensure that all back end equipment from the end of the washer/dryer through the pallet staging area is maintained and operating to produce cans which meet quality specifications.Responsibilities:? Perform set-up and maintenance and ensure efficient operation of the flangers, beaders, light testers, lacquer spray machines, IBOs, palletizer and strappers.?Responsible for the maintenance and set up of all back end conveying, which includes all single filers and can transfer apparatus.?At scheduled intervals, inspect, monitor and document in the computer the following can specifications:-Flanged can height-Factory finished can height-Flange width-Flange angle-Axial load-Panel resistance-Bead depth-Rolling bead diameter and placement-Plug diameter -Oven temperature checks?Perform visual checks of cans to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found.?Complete required paperwork and documentation such as process check sheets, log books, and maintenance check sheets.?Perform Equipment Set-up Evaluations (ESE) and make proper adjustments as required.?Assist in other areas as needed to maintain a smooth flow of cans through the plant.?Maintain cleanliness of all work areas and follow all safety procedures and work practices.?Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:--Strong problem solving skills through an individual and/or collaborative approach--Ability to work independently or with a team--Must be able to look at new solutions and "think outside the box"Education:High SchoolExperience:0-1 yearsQualifications:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements?High School Education/GED ?Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).?Thorough knowledge and understanding of can and end manufacturing process, equipment, and quality specifications.?Ability to demonstrate strong mechanical aptitude on all can and end making equipment in the plant, depending on the primary area of responsibility assigned.?Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions. ?Basic knowledge of computer systems, gauges, tools and equipment.?Ability to safely operate production forklift. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $16.00 per hour
      • 6:00 PM - 6:00 AM
      To safely operate the palletizing machinery ensuring that only quality finished cans are properly loaded and packaged on pallets for shipment to the customer.Responsibilities:Reporting directly to the Team Leader, the Palletizer Operator responsibilities would include, but not be limited to, the following: ???Manages machinery set-up and adjustment and inspects products to ensure compliance to standards???Operate the controls of the palletizing machine so that the proper configuration of cans, slip sheets and top frames are loaded onto each pallet, making sure each pallet has the proper pallet ticket attached.???Stand up tipped cans, replace voids and remove jams to maintain standard production.???Visually examine cans for defects and discard as appropriate. Monitor larger patterns to see if pallet is properly packed and replace missing cans.???Visually examine pallets, top frames and slip-sheets and remove if defective.???Check drops and conveyor system when flow is stopped and clear minor jams as necessary.???Report equipment malfunctions or can quality issues to the Team Leader or Back End Maintainer.???Maintain cleanliness of work area and follow safe working procedures. Report unsafe conditions immediately to the Team Leader.???Maintain proper production ticket printing records.???Complete all required process control checks as specified.???Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, comply with lock out/tag out, etc???Change out a roll of strapping when coil runs out???Operate and clear jams on the strappers ???Operate all controls and switches on lower conveying???Troubleshoot and correct problems in the palletizing process???Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:Preferred Requirements--Packaging industry experience--Knowledge of Six Sigma, SPC, and Lean ManufacturingEducation:High SchoolExperience:0-1 yearsQualifications:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements???High School Education/GED ???Able to read and understand date codes and pallet tickets, know how to operate computer to generate pallet tickets and the procedures for application.???Know and understand overall can quality requirements and be capable for identifying defects..???Know the quality requirements of dunnage (pallets, slip sheets, top frames).???Basic knowledge of entire can-making process.???Basic data entry skills Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      To safely operate the palletizing machinery ensuring that only quality finished cans are properly loaded and packaged on pallets for shipment to the customer.Responsibilities:Reporting directly to the Team Leader, the Palletizer Operator responsibilities would include, but not be limited to, the following: ???Manages machinery set-up and adjustment and inspects products to ensure compliance to standards???Operate the controls of the palletizing machine so that the proper configuration of cans, slip sheets and top frames are loaded onto each pallet, making sure each pallet has the proper pallet ticket attached.???Stand up tipped cans, replace voids and remove jams to maintain standard production.???Visually examine cans for defects and discard as appropriate. Monitor larger patterns to see if pallet is properly packed and replace missing cans.???Visually examine pallets, top frames and slip-sheets and remove if defective.???Check drops and conveyor system when flow is stopped and clear minor jams as necessary.???Report equipment malfunctions or can quality issues to the Team Leader or Back End Maintainer.???Maintain cleanliness of work area and follow safe working procedures. Report unsafe conditions immediately to the Team Leader.???Maintain proper production ticket printing records.???Complete all required process control checks as specified.???Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, comply with lock out/tag out, etc???Change out a roll of strapping when coil runs out???Operate and clear jams on the strappers ???Operate all controls and switches on lower conveying???Troubleshoot and correct problems in the palletizing process???Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:Preferred Requirements--Packaging industry experience--Knowledge of Six Sigma, SPC, and Lean ManufacturingEducation:High SchoolExperience:0-1 yearsQualifications:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements???High School Education/GED ???Able to read and understand date codes and pallet tickets, know how to operate computer to generate pallet tickets and the procedures for application.???Know and understand overall can quality requirements and be capable for identifying defects..???Know the quality requirements of dunnage (pallets, slip sheets, top frames).???Basic knowledge of entire can-making process.???Basic data entry skills Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $15.00 per hour
      • 6:00 AM - 6:00 PM
      To safely operate the palletizing machinery ensuring that only quality finished cans are properly loaded and packaged on pallets for shipment to the customer.Responsibilities:Reporting directly to the Team Leader, the Palletizer Operator responsibilities would include, but not be limited to, the following: ???Manages machinery set-up and adjustment and inspects products to ensure compliance to standards???Operate the controls of the palletizing machine so that the proper configuration of cans, slip sheets and top frames are loaded onto each pallet, making sure each pallet has the proper pallet ticket attached.???Stand up tipped cans, replace voids and remove jams to maintain standard production.???Visually examine cans for defects and discard as appropriate. Monitor larger patterns to see if pallet is properly packed and replace missing cans.???Visually examine pallets, top frames and slip-sheets and remove if defective.???Check drops and conveyor system when flow is stopped and clear minor jams as necessary.???Report equipment malfunctions or can quality issues to the Team Leader or Back End Maintainer.???Maintain cleanliness of work area and follow safe working procedures. Report unsafe conditions immediately to the Team Leader.???Maintain proper production ticket printing records.???Complete all required process control checks as specified.???Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, comply with lock out/tag out, etc???Change out a roll of strapping when coil runs out???Operate and clear jams on the strappers ???Operate all controls and switches on lower conveying???Troubleshoot and correct problems in the palletizing process???Performs other job-related duties as required or assignedWorking hours: 6:00 AM - 6:00 PMSkills:Preferred Requirements--Packaging industry experience--Knowledge of Six Sigma, SPC, and Lean ManufacturingEducation:High SchoolExperience:0-1 yearsQualifications:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements???High School Education/GED ???Able to read and understand date codes and pallet tickets, know how to operate computer to generate pallet tickets and the procedures for application.???Know and understand overall can quality requirements and be capable for identifying defects..???Know the quality requirements of dunnage (pallets, slip sheets, top frames).???Basic knowledge of entire can-making process.???Basic data entry skills Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      To safely operate the palletizing machinery ensuring that only quality finished cans are properly loaded and packaged on pallets for shipment to the customer.Responsibilities:Reporting directly to the Team Leader, the Palletizer Operator responsibilities would include, but not be limited to, the following: ???Manages machinery set-up and adjustment and inspects products to ensure compliance to standards???Operate the controls of the palletizing machine so that the proper configuration of cans, slip sheets and top frames are loaded onto each pallet, making sure each pallet has the proper pallet ticket attached.???Stand up tipped cans, replace voids and remove jams to maintain standard production.???Visually examine cans for defects and discard as appropriate. Monitor larger patterns to see if pallet is properly packed and replace missing cans.???Visually examine pallets, top frames and slip-sheets and remove if defective.???Check drops and conveyor system when flow is stopped and clear minor jams as necessary.???Report equipment malfunctions or can quality issues to the Team Leader or Back End Maintainer.???Maintain cleanliness of work area and follow safe working procedures. Report unsafe conditions immediately to the Team Leader.???Maintain proper production ticket printing records.???Complete all required process control checks as specified.???Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, comply with lock out/tag out, etc???Change out a roll of strapping when coil runs out???Operate and clear jams on the strappers ???Operate all controls and switches on lower conveying???Troubleshoot and correct problems in the palletizing process???Performs other job-related duties as required or assignedWorking hours: 6:00 AM - 6:00 PMSkills:Preferred Requirements--Packaging industry experience--Knowledge of Six Sigma, SPC, and Lean ManufacturingEducation:High SchoolExperience:0-1 yearsQualifications:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements???High School Education/GED ???Able to read and understand date codes and pallet tickets, know how to operate computer to generate pallet tickets and the procedures for application.???Know and understand overall can quality requirements and be capable for identifying defects..???Know the quality requirements of dunnage (pallets, slip sheets, top frames).???Basic knowledge of entire can-making process.???Basic data entry skills Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Waseca, Minnesota
      • Temporary
      • $15.00 per hour
      • 2:30 PM - 10:00 PM
      The Production Assemblers are a part of a team that lays the foundation for industry growth. Seeking a collaborative, diligent person that takes pride in their work and can deliver results within a team that is devoted to excellence and embraces organizational and personal growth.Responsibilities:Light Assembly. Adhering decals to product. Very particular process using a hand torch to preheat the plastic then apply the decals which must be straight with no air bubbles. Air staple caps and inserts to posts. Assemble nuts, bolts, and wire terminals to test stations. Able to stand for extended periods of time. Package product as needed. Able to lift 40lbs. Perform other miscellaneous duties as assigned under the guidance of fulltime employees.Skills: Able to operate basic hand tools. May operate pointer machine (creates the point on the end of a rail post), small air staplers, drill press (with protective gloves)Working hours: 2:30 PM - 10:00 PMSkills:Able to pay close attention to detail. Solid work ethic and organizational skills. Possesses strength and stamina required to stand, walk and lift for long periods of time. Required to wear protective eye wear. Protective gloves with the Drill Press.Education:No Degree RequiredExperience:0-1 yearsQualifications:Must pass pre-employment Drug Screen and Background check. HS Diploma NOT required. Very clean, organized facility. Great working environment (no dust-not dirty work). AIR CONDITIONED plant! Entry level positions. Light lifting. New facility, new machines.Benefits Available after full-time hire (600hrs): Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Production Assemblers are a part of a team that lays the foundation for industry growth. Seeking a collaborative, diligent person that takes pride in their work and can deliver results within a team that is devoted to excellence and embraces organizational and personal growth.Responsibilities:Light Assembly. Adhering decals to product. Very particular process using a hand torch to preheat the plastic then apply the decals which must be straight with no air bubbles. Air staple caps and inserts to posts. Assemble nuts, bolts, and wire terminals to test stations. Able to stand for extended periods of time. Package product as needed. Able to lift 40lbs. Perform other miscellaneous duties as assigned under the guidance of fulltime employees.Skills: Able to operate basic hand tools. May operate pointer machine (creates the point on the end of a rail post), small air staplers, drill press (with protective gloves)Working hours: 2:30 PM - 10:00 PMSkills:Able to pay close attention to detail. Solid work ethic and organizational skills. Possesses strength and stamina required to stand, walk and lift for long periods of time. Required to wear protective eye wear. Protective gloves with the Drill Press.Education:No Degree RequiredExperience:0-1 yearsQualifications:Must pass pre-employment Drug Screen and Background check. HS Diploma NOT required. Very clean, organized facility. Great working environment (no dust-not dirty work). AIR CONDITIONED plant! Entry level positions. Light lifting. New facility, new machines.Benefits Available after full-time hire (600hrs): Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $15.50 per hour
      • 2:30 PM - 11:00 PM
      POSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:ESSENTIAL FUNCTIONS:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:30 PM - 11:00 PMSkills:REQUIRED KNOWLEDGE/SKILLS: 1. Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2. Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3. End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8? hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:High SchoolExperience:0-1 yearsQualifications:PHYSICAL DEMANDS: 1. Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently. Stand, twist, bend and rotate continuously. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      POSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:ESSENTIAL FUNCTIONS:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:30 PM - 11:00 PMSkills:REQUIRED KNOWLEDGE/SKILLS: 1. Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2. Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3. End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8? hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:High SchoolExperience:0-1 yearsQualifications:PHYSICAL DEMANDS: 1. Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently. Stand, twist, bend and rotate continuously. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $14.50 - $15.00 per hour
      • 7:00 AM - 3:00 AM
      This position is responsible for the accurate picking, packing, labeling, shipping & receiving of inventoried products.Responsibilities:Performs a variety of functions involved with shipping, receiving and storage of parts, materials and products.Functions may include preparing parts/materials for shipment, pack material, verifying materials and quantities, maintaining inventory, verifying stock counts, moving parts and materials to proper areas.Operates a variety of motorized and hand powered material handling equipment as well as scales, postage meters, conveyor systems.Performs work from printed order copies as well as various other written and verbal instructions.Maintains a variety of records pertaining to shipping, receiving, unloading trucks.Working hours: 7:00 AM - 3:00 AMSkills:Ability to use computer terminals.Ability to read and write in EnglishJob duties require use of arithmetic, reading, writing, and measuring equipment.Education:High SchoolExperience:0-1 yearsQualifications:Applicants must have good interpersonal and conflict resolution skills.Applicants must be able and willing to support different areas and functions within the warehouse as business requires. Contact us with any additional questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is responsible for the accurate picking, packing, labeling, shipping & receiving of inventoried products.Responsibilities:Performs a variety of functions involved with shipping, receiving and storage of parts, materials and products.Functions may include preparing parts/materials for shipment, pack material, verifying materials and quantities, maintaining inventory, verifying stock counts, moving parts and materials to proper areas.Operates a variety of motorized and hand powered material handling equipment as well as scales, postage meters, conveyor systems.Performs work from printed order copies as well as various other written and verbal instructions.Maintains a variety of records pertaining to shipping, receiving, unloading trucks.Working hours: 7:00 AM - 3:00 AMSkills:Ability to use computer terminals.Ability to read and write in EnglishJob duties require use of arithmetic, reading, writing, and measuring equipment.Education:High SchoolExperience:0-1 yearsQualifications:Applicants must have good interpersonal and conflict resolution skills.Applicants must be able and willing to support different areas and functions within the warehouse as business requires. Contact us with any additional questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $15.00 per hour
      • 7:00 AM - 3:30 PM
      This position is accountable for the set-up, assembly and packaging of product to cost-effectively produce high-quality products on a timely basis that meets customer requirements.Responsibilities:-Assemble and/or package high quality products that meet customer and design specifications while minimizing scrap/rework costs.-Continually monitor methods, processes and procedures to ensure departmental goals are being met related to efficiencies, equipment utilization and time usage in order to maintain or improve cost competitiveness.-Provide quality in all goods and services delivered to internal and external customers through an approach of thorough planning, responsible implementation, and continuous improvement.-Follow and continually monitor established safety procedures to assure a clean, safe work environment is promoted and maintained.-Maintain a positive work atmosphere by behaving and communicating in a manner that interfaces well with customers, clients, co-workers and management members.Working hours: 7:00 AM - 3:30 PMSkills:Ability to operate hand tools, such as arbor presses, tape machines, and bandersAbility to work overtime including weekends, and alter hours as business needs dictateAbility to read and understand written EnglishEducation:No Degree RequiredExperience:0-1 yearsQualifications:Basic Math skills, including percentages and the ability to count accurately Contact us at 507-451-3400 with any additional questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is accountable for the set-up, assembly and packaging of product to cost-effectively produce high-quality products on a timely basis that meets customer requirements.Responsibilities:-Assemble and/or package high quality products that meet customer and design specifications while minimizing scrap/rework costs.-Continually monitor methods, processes and procedures to ensure departmental goals are being met related to efficiencies, equipment utilization and time usage in order to maintain or improve cost competitiveness.-Provide quality in all goods and services delivered to internal and external customers through an approach of thorough planning, responsible implementation, and continuous improvement.-Follow and continually monitor established safety procedures to assure a clean, safe work environment is promoted and maintained.-Maintain a positive work atmosphere by behaving and communicating in a manner that interfaces well with customers, clients, co-workers and management members.Working hours: 7:00 AM - 3:30 PMSkills:Ability to operate hand tools, such as arbor presses, tape machines, and bandersAbility to work overtime including weekends, and alter hours as business needs dictateAbility to read and understand written EnglishEducation:No Degree RequiredExperience:0-1 yearsQualifications:Basic Math skills, including percentages and the ability to count accurately Contact us at 507-451-3400 with any additional questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temporary
      • $14.25 per hour
      • 7:00 AM - 3:30 PM
      Oh, Hi, just Spherion here with another great opportunity, with a great company, with great hours, right here in Mankato. We have a client in need of assembly workers. Oh, you don't have experience with assembly? That is OKAY! This client is willing to train, bright, motivated individuals likes yourself, so have no fear!This is a 1st shift position; Monday - Friday 7:00AM-3:30PMResponsibilities:Performs assembly on assigned products using machinery and/or tools as well as correct production methods to ensure accuracy and quality of finished products. Maintains production output levels consistent with set standards. May perform testing, quality inspections and reworking of deficient components and/or finished products to ensure efficient operation.Ability to read and utilize work orders in the production process. Informs management on issues related to quality, production, and/or safety which may adversely impact meeting the areas goals. Manages parts bin quantities and notifies the production supervisor or lead person when quantities are low or insufficient to maintain production.Documents actions by completing required production and quality forms.Maintains a clean and safe work area by complying with company procedures.Monitors machinery and advises maintenance of necessary repairs.Performs other duties as assigned.Working hours: 7:00 AM - 3:30 PMSkills:Good attendanceAssembly experience is a plus, but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand for 8 hours APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Oh, Hi, just Spherion here with another great opportunity, with a great company, with great hours, right here in Mankato. We have a client in need of assembly workers. Oh, you don't have experience with assembly? That is OKAY! This client is willing to train, bright, motivated individuals likes yourself, so have no fear!This is a 1st shift position; Monday - Friday 7:00AM-3:30PMResponsibilities:Performs assembly on assigned products using machinery and/or tools as well as correct production methods to ensure accuracy and quality of finished products. Maintains production output levels consistent with set standards. May perform testing, quality inspections and reworking of deficient components and/or finished products to ensure efficient operation.Ability to read and utilize work orders in the production process. Informs management on issues related to quality, production, and/or safety which may adversely impact meeting the areas goals. Manages parts bin quantities and notifies the production supervisor or lead person when quantities are low or insufficient to maintain production.Documents actions by completing required production and quality forms.Maintains a clean and safe work area by complying with company procedures.Monitors machinery and advises maintenance of necessary repairs.Performs other duties as assigned.Working hours: 7:00 AM - 3:30 PMSkills:Good attendanceAssembly experience is a plus, but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand for 8 hours APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $13.00 per hour
      • 7:00 AM - 3:30 PM
      JOBS! JOBS! JOBS! The ideal candidate for this position will need to be able to be cross-trained to perform a variety of tasks that may include: receive and sort laundry, inspect garment/coverall for all mending needs, operate equipment such as dryers and ironers, and bundling of clean garments to be re-distributed to customers.Responsibilities:Work in assigned area of production responsibility as scheduled in a safe and efficient manner.Attend departmental and branch meetings as needed to engage and complete education and training.Assist fellow production workers by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment.Consistently seek the improvement and development in assigned role/job and skills. Seek to develop multiple areas of capability in order to support the production team.Create and support a culture of adherence to branch standardization in support of, financial, service, and safety goals.Other duties as assigned by supervisor or manager.Working hours: 7:00 AM - 3:30 PMSkills:Basic Math reasoning skillsCapability to work in a fast-paced work environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:Lifting Ability; up to 25-50 pounds continuouslyAttendance is an essential function of the job Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      JOBS! JOBS! JOBS! The ideal candidate for this position will need to be able to be cross-trained to perform a variety of tasks that may include: receive and sort laundry, inspect garment/coverall for all mending needs, operate equipment such as dryers and ironers, and bundling of clean garments to be re-distributed to customers.Responsibilities:Work in assigned area of production responsibility as scheduled in a safe and efficient manner.Attend departmental and branch meetings as needed to engage and complete education and training.Assist fellow production workers by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment.Consistently seek the improvement and development in assigned role/job and skills. Seek to develop multiple areas of capability in order to support the production team.Create and support a culture of adherence to branch standardization in support of, financial, service, and safety goals.Other duties as assigned by supervisor or manager.Working hours: 7:00 AM - 3:30 PMSkills:Basic Math reasoning skillsCapability to work in a fast-paced work environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:Lifting Ability; up to 25-50 pounds continuouslyAttendance is an essential function of the job Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $20.95 per hour
      • 6:00 PM - 6:00 AM
      The Front End Maintainers work 12-hour shifts on for four days and off for four days. There are typically 3 Front End Maintainers on at one time. The Front End Maintainers initiate the can making process. Steel coils are transported by a fork lift to the upender where they are tipped on to their side. They are then transported again by coil car to the unwinder where they are mounted in place. Two Front End Maintainers guide the steel sheet through the lubricator and into the press.From this point the Front End Maintainers are responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.Responsibilities:Duties And Responsibilities:? Inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.? Set-up, maintenance and operation of the upender, unwinder, lubricator, and cupping press.? Set-up maintenance and operation of the body makers, trimmers, and conveying systems.? Inspect and monitor, then enter into computer the following can specifications:? - flange wall thickness - mid-wall thickness? - dome depth - trim can heightWorking hours: 6:00 PM - 6:00 AMSkills:? Perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.? Assist in other areas as needed to maintain smooth can flow through the plant.? Complete required paperwork and documentation such as coil log, check sheets, etc.? Maintain cleanliness of all work areas and machines and practice proper safety procedures.? Performs other job-related duties as required or assigned.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Front End Maintainers work 12-hour shifts on for four days and off for four days. There are typically 3 Front End Maintainers on at one time. The Front End Maintainers initiate the can making process. Steel coils are transported by a fork lift to the upender where they are tipped on to their side. They are then transported again by coil car to the unwinder where they are mounted in place. Two Front End Maintainers guide the steel sheet through the lubricator and into the press.From this point the Front End Maintainers are responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.Responsibilities:Duties And Responsibilities:? Inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.? Set-up, maintenance and operation of the upender, unwinder, lubricator, and cupping press.? Set-up maintenance and operation of the body makers, trimmers, and conveying systems.? Inspect and monitor, then enter into computer the following can specifications:? - flange wall thickness - mid-wall thickness? - dome depth - trim can heightWorking hours: 6:00 PM - 6:00 AMSkills:? Perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.? Assist in other areas as needed to maintain smooth can flow through the plant.? Complete required paperwork and documentation such as coil log, check sheets, etc.? Maintain cleanliness of all work areas and machines and practice proper safety procedures.? Performs other job-related duties as required or assigned.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $16.00 per hour
      • 6:00 AM - 2:30 PM
      Someone with ample forklift experience. They should be willing to stay busy, because they will be. The schedule is Mon-Fri, 6a-2:30p. There could be some occasional overtime. Most often the overtime would be working until 4:30p. Weekend work would be rare, if at all.Responsibilities:The job also involves stacking of plastic top frames, which is done manually, off the forklift. So it's not all seat time.Working hours: 6:00 AM - 2:30 PMSkills:The ideal candidate would also have good organizational skills as they will be responsible for keeping the area in order.Education:DoctorateExperience:0-1 yearsQualifications:High School Diploma Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Someone with ample forklift experience. They should be willing to stay busy, because they will be. The schedule is Mon-Fri, 6a-2:30p. There could be some occasional overtime. Most often the overtime would be working until 4:30p. Weekend work would be rare, if at all.Responsibilities:The job also involves stacking of plastic top frames, which is done manually, off the forklift. So it's not all seat time.Working hours: 6:00 AM - 2:30 PMSkills:The ideal candidate would also have good organizational skills as they will be responsible for keeping the area in order.Education:DoctorateExperience:0-1 yearsQualifications:High School Diploma Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Waseca, Minnesota
      • Temporary
      • $15.00 per hour
      • 5:00 AM - 2:25 PM
      The Production Assemblers are a part of a team that lays the foundation for industry growth. Seeking a collaborative, diligent person that takes pride in their work and can deliver results within a team that is devoted to excellence and embraces organizational and personal growth.Responsibilities:Light Assembly. Adhering decals to product. Very particular process using a hand torch to preheat the plastic then apply the decals which must be straight with no air bubbles. Air staple caps and inserts to posts. Assemble nuts, bolts, and wire terminals to test stations. Able to stand for extended periods of time. Package product as needed. Able to lift 40lbs. Perform other miscellaneous duties as assigned under the guidance of fulltime employees.Working hours: 5:00 AM - 2:25 PMSkills:Able to operate basic hand tools. May operate pointer machine (creates the point on the end of a rail post), small air staplers, drill press (with protective gloves)Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to pay close attention to detail. Solid work ethic and organizational skills. Possesses strength and stamina required to stand, walk and lift for long periods of time. Required to wear protective eye wear. Protective gloves with the Drill Press.Must pass pre-employment Drug Screen and Background check. HS Diploma NOT required. Very clean, organized facility. Great working environment (no dust-not dirty work). AIR CONDITIONED plant! Entry level positions. Light lifting. New facility, new machines.Benefits Available after full-time hire (600hrs): Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Production Assemblers are a part of a team that lays the foundation for industry growth. Seeking a collaborative, diligent person that takes pride in their work and can deliver results within a team that is devoted to excellence and embraces organizational and personal growth.Responsibilities:Light Assembly. Adhering decals to product. Very particular process using a hand torch to preheat the plastic then apply the decals which must be straight with no air bubbles. Air staple caps and inserts to posts. Assemble nuts, bolts, and wire terminals to test stations. Able to stand for extended periods of time. Package product as needed. Able to lift 40lbs. Perform other miscellaneous duties as assigned under the guidance of fulltime employees.Working hours: 5:00 AM - 2:25 PMSkills:Able to operate basic hand tools. May operate pointer machine (creates the point on the end of a rail post), small air staplers, drill press (with protective gloves)Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to pay close attention to detail. Solid work ethic and organizational skills. Possesses strength and stamina required to stand, walk and lift for long periods of time. Required to wear protective eye wear. Protective gloves with the Drill Press.Must pass pre-employment Drug Screen and Background check. HS Diploma NOT required. Very clean, organized facility. Great working environment (no dust-not dirty work). AIR CONDITIONED plant! Entry level positions. Light lifting. New facility, new machines.Benefits Available after full-time hire (600hrs): Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 55 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.