You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    78 jobs found in Louisiana

    Filter1
    Clear all
      • Luling, Louisiana
      • Temp to Perm
      • $60.00 - $70.00 per hour
      • 8:00 AM - 5:00 PM
      Our client is looking for an experienced Project Engineer with a focus in electrical engineering. The incumbent will report to the Site Project Engineering Manager and is responsible for overseeing and executing projects with an emphasis on electrical and instrumentation engineering activities, including: electrical equipment calculations, electrical equipment specification and design, instrumentation specification and design, work plan writing and preparation, cost estimation, equipment procurement, system startup, data management and reporting, and system troubleshooting (as required).Responsibilities:Project Management:- Manage multiple tasks to ensure projects are completed on time and on budget, with a high degree of internal and external client satisfaction.- Communicate project/task status and issues with project manager, client and/or company management.- Coordination and management of material vendors, subcontractors, and company staff- Maintain and report on a project budget and schedule to meet project expectations- Develop project estimates (budget and schedule) to secure funding- Use engineering discipline and experience to solve project issues during installation- Locate project drawings and provide initial markups to drafting for incorporation- Able to independently define the course of action and seek out the information and resources necessary to complete that courseDesign Engineering:- Oversee and prepare designs and work plans, from conceptual design through detailed design packages. Primary focus is on the electrical engineering aspect; however, expect involvement in other aspects of the design process. Electrical design tasks may include electrical load calculations, short-circuit and overcurrent protection calculations, transformer and wire/cable sizing. Other typical design aspects may include preparation of tray routing, wire routes, etc.- Develop electrical equipment and power distribution equipment specifications; prepare electrical load calculations for single and three phase loads; sketch/mark up electrical single line drawings, schematics and detail drawings as required.- Develop cable schedules, instrument indices, equipment lists, and material takeoffs; prepare requests for bids for subcontractors and material vendors. Prepare construction and equipment specifications, including means and methods. Compare bids and recommend the selection of subcontractors and material vendors.- Perform field visits on new project opportunities to determine the available site power, and utility/facility constraints, collect information regarding construction permits, evaluate potential site support contractors, and assist with preparation of cost estimates.- Lead electrical design aspects of company projects- Work with site DCS team to implement changes to the DCS as it applies to assigned projects- Understanding of and experience working with various voltage levels including: 24VDC, 120VAC, 480VAC, 2400VAC, and 15kV- Understanding of and experience working with instrumentation systems including: 4-20ma, 0-5VDC, and 0-10VDCWorking hours: 8:00 AM - 5:00 PMSkills:Skills/Aptitudes:- Self-starter and outgoing personality traits- Demonstrated leadership skills- Ability to take direction and act independently- Strong communications and organization skills- Ability to manage multiple priorities and stay organized while doing soLevel of Supervision:- Work independently based on general instructions, directions or objectivesEducation:BachelorsExperience:4-7 yearsQualifications:- BS or higher Electrical Engineering degree- Advanced training & experience in electrical power system design & distribution- At least 10 years electrical engineering experience- Prefer at least 5 years experience in c
      Our client is looking for an experienced Project Engineer with a focus in electrical engineering. The incumbent will report to the Site Project Engineering Manager and is responsible for overseeing and executing projects with an emphasis on electrical and instrumentation engineering activities, including: electrical equipment calculations, electrical equipment specification and design, instrumentation specification and design, work plan writing and preparation, cost estimation, equipment procurement, system startup, data management and reporting, and system troubleshooting (as required).Responsibilities:Project Management:- Manage multiple tasks to ensure projects are completed on time and on budget, with a high degree of internal and external client satisfaction.- Communicate project/task status and issues with project manager, client and/or company management.- Coordination and management of material vendors, subcontractors, and company staff- Maintain and report on a project budget and schedule to meet project expectations- Develop project estimates (budget and schedule) to secure funding- Use engineering discipline and experience to solve project issues during installation- Locate project drawings and provide initial markups to drafting for incorporation- Able to independently define the course of action and seek out the information and resources necessary to complete that courseDesign Engineering:- Oversee and prepare designs and work plans, from conceptual design through detailed design packages. Primary focus is on the electrical engineering aspect; however, expect involvement in other aspects of the design process. Electrical design tasks may include electrical load calculations, short-circuit and overcurrent protection calculations, transformer and wire/cable sizing. Other typical design aspects may include preparation of tray routing, wire routes, etc.- Develop electrical equipment and power distribution equipment specifications; prepare electrical load calculations for single and three phase loads; sketch/mark up electrical single line drawings, schematics and detail drawings as required.- Develop cable schedules, instrument indices, equipment lists, and material takeoffs; prepare requests for bids for subcontractors and material vendors. Prepare construction and equipment specifications, including means and methods. Compare bids and recommend the selection of subcontractors and material vendors.- Perform field visits on new project opportunities to determine the available site power, and utility/facility constraints, collect information regarding construction permits, evaluate potential site support contractors, and assist with preparation of cost estimates.- Lead electrical design aspects of company projects- Work with site DCS team to implement changes to the DCS as it applies to assigned projects- Understanding of and experience working with various voltage levels including: 24VDC, 120VAC, 480VAC, 2400VAC, and 15kV- Understanding of and experience working with instrumentation systems including: 4-20ma, 0-5VDC, and 0-10VDCWorking hours: 8:00 AM - 5:00 PMSkills:Skills/Aptitudes:- Self-starter and outgoing personality traits- Demonstrated leadership skills- Ability to take direction and act independently- Strong communications and organization skills- Ability to manage multiple priorities and stay organized while doing soLevel of Supervision:- Work independently based on general instructions, directions or objectivesEducation:BachelorsExperience:4-7 yearsQualifications:- BS or higher Electrical Engineering degree- Advanced training & experience in electrical power system design & distribution- At least 10 years electrical engineering experience- Prefer at least 5 years experience in c
      • Luling, Louisiana
      • Temp to Perm
      • $50.00 - $80.00 per hour
      • 8:00 AM - 5:00 PM
      Our client is looking for a Senior Mechanical Project Engineer to support their diverse range of manufacturing projects. The senior mechanical engineer will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis.Responsibilities:- Mastery of the Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)- Development of preliminary project description, schedule and cost estimates upon project assignment- Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations and piping estimates.- Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.- Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project- Development of formal project scopes and capital request documentation- Producing detailed design calculations and sketches for material of constructions associated with the project.- Reviewing and checking vendor / other discipline drawings for mechanical input- Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global standards and conformance to good engineering practice- In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment- Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application and knowledge of piping supports- Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)- Recognize and communicate scope and design changes promptly- Consulting with design leaders from other disciplines to ensure smooth flow of vital information necessary for the scheduled completion of the project- Knowledge and understanding of schedule constraints and information requirements to produce all mechanical deliverables- Project Quality Assurance and Quality control direction and support- Project closureWorking hours: 8:00 AM - 5:00 PMSkills:- Strong Microstation (or similar) CAD and Excel spreadsheet skills required.- Ability to organize and maintain data file and folder structures- Ability to manage assigned tasks to meet timelines- Very detail oriented- Good Communication skillsEducation:BachelorsExperience:7-10 yearsQualifications:- B.S. or M.S. in Mechanical Engineering from an accredited university is required- Professional Engineering (PE) registration is a plus- 10+ years of relevant industrial experience in mechanical engineering- Strong project management and multitasking skills- Demonstrated creativity, innovation and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing and improving- Solid verbal and written communication and computer skills, Microsoft Suite- Proven leadership abilities and ability to influence in a non-traditional business environment- Unwavering ethics- Strong commitment to safety
      Our client is looking for a Senior Mechanical Project Engineer to support their diverse range of manufacturing projects. The senior mechanical engineer will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis.Responsibilities:- Mastery of the Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)- Development of preliminary project description, schedule and cost estimates upon project assignment- Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations and piping estimates.- Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.- Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project- Development of formal project scopes and capital request documentation- Producing detailed design calculations and sketches for material of constructions associated with the project.- Reviewing and checking vendor / other discipline drawings for mechanical input- Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global standards and conformance to good engineering practice- In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment- Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application and knowledge of piping supports- Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)- Recognize and communicate scope and design changes promptly- Consulting with design leaders from other disciplines to ensure smooth flow of vital information necessary for the scheduled completion of the project- Knowledge and understanding of schedule constraints and information requirements to produce all mechanical deliverables- Project Quality Assurance and Quality control direction and support- Project closureWorking hours: 8:00 AM - 5:00 PMSkills:- Strong Microstation (or similar) CAD and Excel spreadsheet skills required.- Ability to organize and maintain data file and folder structures- Ability to manage assigned tasks to meet timelines- Very detail oriented- Good Communication skillsEducation:BachelorsExperience:7-10 yearsQualifications:- B.S. or M.S. in Mechanical Engineering from an accredited university is required- Professional Engineering (PE) registration is a plus- 10+ years of relevant industrial experience in mechanical engineering- Strong project management and multitasking skills- Demonstrated creativity, innovation and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing and improving- Solid verbal and written communication and computer skills, Microsoft Suite- Proven leadership abilities and ability to influence in a non-traditional business environment- Unwavering ethics- Strong commitment to safety
      • Luling, Louisiana
      • Temp to Perm
      • $37.00 - $40.00 per hour
      • 8:00 AM - 5:00 PM
      We have an opening for a Chemical Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates.Responsibilities:? Complete process engineering design for all projects when required? Work in conjunction with area personnel and management to develop project justification ? Validate project improvements and cost savings associated with project after implementation? Mark up P&IDs as required for all projects? Modification of PFDs, material and/or energy balances? Modification of other pertinent parts of the PMF (e.g. operating procedures, JTA?s, LOTO?s)? Development of process control definition? Provide instrument process data? In conjunction with area personnel develop and execute operator training for projects? Coordinate project MOCs? Conduct/direct all project PHA?s and reviews up to and including hazard and operability (HAZOP) studies? Ensure that all aspects of a modification or project meet environmental regulations? Participate in project safety walk-throughs? In conjunction with area engineers assist in checkout, commissioning and startup of new projectsWorking hours: 8:00 AM - 5:00 PMSkills:- Ability to present and explain project detail to all levels of management.- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, andEducation:BachelorsExperience:4-7 yearsQualifications:? 3-7 years experience in a chemical manufacturing facility (Intermediate Process Engineer) ? Experience leading and executing capital projects in a chemical manufacturing facility ? Experience with Equipment Sizing Calculations and Design (Pumps, Valves, Piping, Instruments) Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have an opening for a Chemical Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates.Responsibilities:? Complete process engineering design for all projects when required? Work in conjunction with area personnel and management to develop project justification ? Validate project improvements and cost savings associated with project after implementation? Mark up P&IDs as required for all projects? Modification of PFDs, material and/or energy balances? Modification of other pertinent parts of the PMF (e.g. operating procedures, JTA?s, LOTO?s)? Development of process control definition? Provide instrument process data? In conjunction with area personnel develop and execute operator training for projects? Coordinate project MOCs? Conduct/direct all project PHA?s and reviews up to and including hazard and operability (HAZOP) studies? Ensure that all aspects of a modification or project meet environmental regulations? Participate in project safety walk-throughs? In conjunction with area engineers assist in checkout, commissioning and startup of new projectsWorking hours: 8:00 AM - 5:00 PMSkills:- Ability to present and explain project detail to all levels of management.- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, andEducation:BachelorsExperience:4-7 yearsQualifications:? 3-7 years experience in a chemical manufacturing facility (Intermediate Process Engineer) ? Experience leading and executing capital projects in a chemical manufacturing facility ? Experience with Equipment Sizing Calculations and Design (Pumps, Valves, Piping, Instruments) Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Luling, Louisiana
      • Temp to Perm
      • $55.00 - $75.00 per hour
      • 8:00 AM - 5:00 PM
      We have an opening for a Mechanical Project Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates. The Intermediate Mechanical Project Engineer will support our diverse range of manufacturing projects. The incumbent will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis. This work will be performed under the supervision of the mechanical lead. The Intermediate Mechanical Project Engineer with serve as the project manager for their assigned projects for which they will also perform the mechanical engineering services for. This requires the incorporation of other disciplines to successfully complete the assigned projects on time and on budget.Apply today or if you would prefer to submit your resume via email or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Responsibilities:? Familiarity with and utilizing department design and drafting standards? Mastery of the client Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)? Development of preliminary project description, schedule, and cost estimates upon project assignment? Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations, and piping estimates.? Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.? Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project? Producing detailed design calculations and sketches for material of constructions associated with the project.? Reviewing and checking vendor / other discipline drawings for mechanical input? Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global client standards and conformance to good engineering practice? In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment? Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application, and knowledge of piping supports? Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)? Produce designs with efficient use of construction material with emphasis on ease of construction and meeting the project goals? Estimate and schedule professional service hours and assess the progress / quality of the mechanical work? Assist other engineers in developing and assembling scopes, drawings / specifications into packages, enabling mechanical purchase inquiries to be issued for procurement and materials or for subcontract pricing. This may include packaged equipment while soliciting input from other disciplines to provide requirements for associated structural, instrument and electrical aspects of the scope.? Perform fieldwork necessary to gather field date, check tie-ins and provide construction supportWorking hours: 8:00 AM - 5:00 PMSkills:- Excellent presentation skills- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, and improvingEducation:BachelorsExperience:7-10 yearsQualifications:? B.S. or M.S. in Mechanical Engineering from an accredited university? Professional Engineering (PE) registration is a plus? 5+ years of relevant industrial experience in mechanical engineering? Solid verbal and written communication and computer skills, Microsoft Suite? Proven leadership abilities and ability to influence in a non-traditional business environment? Unwavering ethics? Strong commitment to safety? Ability to work alone and as a true team player Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 (call or text) / spherionneworleans@spherion.com.Spherion will always protect your privacy: all discussions and communications are strictly confidential.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have an opening for a Mechanical Project Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates. The Intermediate Mechanical Project Engineer will support our diverse range of manufacturing projects. The incumbent will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis. This work will be performed under the supervision of the mechanical lead. The Intermediate Mechanical Project Engineer with serve as the project manager for their assigned projects for which they will also perform the mechanical engineering services for. This requires the incorporation of other disciplines to successfully complete the assigned projects on time and on budget.Apply today or if you would prefer to submit your resume via email or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Responsibilities:? Familiarity with and utilizing department design and drafting standards? Mastery of the client Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)? Development of preliminary project description, schedule, and cost estimates upon project assignment? Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations, and piping estimates.? Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.? Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project? Producing detailed design calculations and sketches for material of constructions associated with the project.? Reviewing and checking vendor / other discipline drawings for mechanical input? Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global client standards and conformance to good engineering practice? In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment? Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application, and knowledge of piping supports? Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)? Produce designs with efficient use of construction material with emphasis on ease of construction and meeting the project goals? Estimate and schedule professional service hours and assess the progress / quality of the mechanical work? Assist other engineers in developing and assembling scopes, drawings / specifications into packages, enabling mechanical purchase inquiries to be issued for procurement and materials or for subcontract pricing. This may include packaged equipment while soliciting input from other disciplines to provide requirements for associated structural, instrument and electrical aspects of the scope.? Perform fieldwork necessary to gather field date, check tie-ins and provide construction supportWorking hours: 8:00 AM - 5:00 PMSkills:- Excellent presentation skills- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, and improvingEducation:BachelorsExperience:7-10 yearsQualifications:? B.S. or M.S. in Mechanical Engineering from an accredited university? Professional Engineering (PE) registration is a plus? 5+ years of relevant industrial experience in mechanical engineering? Solid verbal and written communication and computer skills, Microsoft Suite? Proven leadership abilities and ability to influence in a non-traditional business environment? Unwavering ethics? Strong commitment to safety? Ability to work alone and as a true team player Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 (call or text) / spherionneworleans@spherion.com.Spherion will always protect your privacy: all discussions and communications are strictly confidential.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Orleans, Louisiana
      • Temp to Perm
      • $15.00 per hour
      • 6:45 AM - 3:00 PM
      Our client is looking for a Production Machine Operator to work on on a manufacturing line. This is a great temp-hire opportunity with an established company in New Orleans. We look forward to hearing from you.Responsibilities:- Utilizing production machinery- Adhering to all company processes and safety standardsWorking hours: 6:45 AM - 3:00 PMSkills:- Effective communicator- Familiar with a micrometer is a plus - Good math aptitude - Forklift experience is a plusEducation:High SchoolExperience:1-4 yearsQualifications:- Must have manufacturing environment experience- HS Diploma or GED- Entry level computer skills. - Must be available to work rotating shifts: 6:45 AM - 3:00 PM, 2:45 PM - 11:00 PM and 10:45 PM - 7:00 AM Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client is looking for a Production Machine Operator to work on on a manufacturing line. This is a great temp-hire opportunity with an established company in New Orleans. We look forward to hearing from you.Responsibilities:- Utilizing production machinery- Adhering to all company processes and safety standardsWorking hours: 6:45 AM - 3:00 PMSkills:- Effective communicator- Familiar with a micrometer is a plus - Good math aptitude - Forklift experience is a plusEducation:High SchoolExperience:1-4 yearsQualifications:- Must have manufacturing environment experience- HS Diploma or GED- Entry level computer skills. - Must be available to work rotating shifts: 6:45 AM - 3:00 PM, 2:45 PM - 11:00 PM and 10:45 PM - 7:00 AM Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Orleans, Louisiana
      • Temporary
      • $17.00 - $18.00 per hour
      • 4:00 AM - 1:00 PM
      Put your skills to the test!Spherion is seeking a Quality Assurance Lab Technician to work with our client in Harahan, LA. This is temporary role that requires attention to detail, experience and accuracy.Are you up for the challenge and willing to work with a large organization with a global presence? If so, apply today for immediate consideration. This is a Temporary/Contract Role paying $17-$18/hr based on experience. Hours are 4am-1pm Monday -Friday with weekly paychecks.Responsibilities:Perform beverage attribute testing to include: Brix, Assay, CO2, Net Contents, pH and Taste & Odor Perform package attribute testing to include: Closure Removal Torques, Can Lid Application (Where Applicable), and Visual Appearance Perform finished product attributes such as: Correct Bottle/Can, Correct Closure/Lid, Correct Label, Correct Production Date Code to include final packaging (Cases, Cartons, Trays, Wraps, etc.) and verification of any Promotional Identification Perform Micro sample collection and testing (Note: A designated technician may be selected for Micro testing, in some cases, removing this responsibility from the remaining technicians) Perform Syrup testing such as Brix, Assay, pH to include the use of an ultra-performance liquid chromatography (UPLC) or a high-performance liquid chromatography (HPLC) unit. (Note: Blending Technicians may be selected for Syrup testing, in some cases, removing this responsibility from Lab Technicians) Perform lab equipment calibrations and/or verifications as needed. Lab equipment maintenance and problem troubleshoot is required as needed Perform water treatment duties as described by the Quality Manager where applicable Perform Internal Clean in Place (CIP) setup as described by the Quality Manager where applicable Participate in the Sensory Program where applicable Data entry from product testing is required in Laboratory Data Management System (LDMS) to include review of test results and reaction should an out of specification situation arise. Knowledge of the Product Hold program (when to use and when not to use) is a must. Assist in writing standard operating procedures (SOP's) as needed to include the use of Master Control Perform daily lab housekeeping to include good manufacturing practices (GMP) inside and outside the lab where needed Maintain lab testing equipment supplies to include ordering and inventory controlWorking hours: 4:00 AM - 1:00 PMSkills:Ability to maintain safety and security procedures of company assetsEffective math skillsEffective time management and organizational skills neededAttention to detail and analytical thinking skillsEducation:High SchoolExperience:1-4 yearsQualifications:Basic navigating knowledge of SAPProficiency in Microsoft ProgramsIn Depth knowledge of (LDMS) Laboratory Data management Systems preferred At Least 6 months of experience or training is required Following completion of your application, please give our office a call for immediate consideration. (504-455-6565)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Put your skills to the test!Spherion is seeking a Quality Assurance Lab Technician to work with our client in Harahan, LA. This is temporary role that requires attention to detail, experience and accuracy.Are you up for the challenge and willing to work with a large organization with a global presence? If so, apply today for immediate consideration. This is a Temporary/Contract Role paying $17-$18/hr based on experience. Hours are 4am-1pm Monday -Friday with weekly paychecks.Responsibilities:Perform beverage attribute testing to include: Brix, Assay, CO2, Net Contents, pH and Taste & Odor Perform package attribute testing to include: Closure Removal Torques, Can Lid Application (Where Applicable), and Visual Appearance Perform finished product attributes such as: Correct Bottle/Can, Correct Closure/Lid, Correct Label, Correct Production Date Code to include final packaging (Cases, Cartons, Trays, Wraps, etc.) and verification of any Promotional Identification Perform Micro sample collection and testing (Note: A designated technician may be selected for Micro testing, in some cases, removing this responsibility from the remaining technicians) Perform Syrup testing such as Brix, Assay, pH to include the use of an ultra-performance liquid chromatography (UPLC) or a high-performance liquid chromatography (HPLC) unit. (Note: Blending Technicians may be selected for Syrup testing, in some cases, removing this responsibility from Lab Technicians) Perform lab equipment calibrations and/or verifications as needed. Lab equipment maintenance and problem troubleshoot is required as needed Perform water treatment duties as described by the Quality Manager where applicable Perform Internal Clean in Place (CIP) setup as described by the Quality Manager where applicable Participate in the Sensory Program where applicable Data entry from product testing is required in Laboratory Data Management System (LDMS) to include review of test results and reaction should an out of specification situation arise. Knowledge of the Product Hold program (when to use and when not to use) is a must. Assist in writing standard operating procedures (SOP's) as needed to include the use of Master Control Perform daily lab housekeeping to include good manufacturing practices (GMP) inside and outside the lab where needed Maintain lab testing equipment supplies to include ordering and inventory controlWorking hours: 4:00 AM - 1:00 PMSkills:Ability to maintain safety and security procedures of company assetsEffective math skillsEffective time management and organizational skills neededAttention to detail and analytical thinking skillsEducation:High SchoolExperience:1-4 yearsQualifications:Basic navigating knowledge of SAPProficiency in Microsoft ProgramsIn Depth knowledge of (LDMS) Laboratory Data management Systems preferred At Least 6 months of experience or training is required Following completion of your application, please give our office a call for immediate consideration. (504-455-6565)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Orleans, Louisiana
      • Temp to Perm
      • $18.00 per hour
      • 3:00 AM - 1:00 PM
      Our client in the beverage industry is seeking an experienced machine operator to assist with production. This customer is one of the most recognizable brands in the world and this is a great opportunity to begin your career with them. Feel free to reach out directly should you have any questions regarding the role: 504-455-6565/spherionneworleans@spherion.com. - Pay rate: $18.00 hourly - Must be able to work weekends.- Shift: 3:00 AM - 1:00 PMResponsibilities:- Responsible for operating various manual and automated equipment in the production process. - Set up machinery and ensure all production materials are available. - Operate and monitor equipment and replenish materials as needed. - Visually inspect production run and document results. - Determine and report malfunctions to appropriate parties. - Maintain cleanliness of equipment and assigned area. - Other duties as assigned by supervisor.Working hours: 3:00 AM - 1:00 PMSkills:- High level communicator (written and verbal)- Mechanically and technically inclined- MUST have forklift experience.Education:High SchoolExperience:1-4 yearsQualifications:- Experience using and maintaining production equipment- Experience working in a production environment - MUST have forklift experience. Apply now, or feel free to forward your resume to: charlesthompson@spherion.com. Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client in the beverage industry is seeking an experienced machine operator to assist with production. This customer is one of the most recognizable brands in the world and this is a great opportunity to begin your career with them. Feel free to reach out directly should you have any questions regarding the role: 504-455-6565/spherionneworleans@spherion.com. - Pay rate: $18.00 hourly - Must be able to work weekends.- Shift: 3:00 AM - 1:00 PMResponsibilities:- Responsible for operating various manual and automated equipment in the production process. - Set up machinery and ensure all production materials are available. - Operate and monitor equipment and replenish materials as needed. - Visually inspect production run and document results. - Determine and report malfunctions to appropriate parties. - Maintain cleanliness of equipment and assigned area. - Other duties as assigned by supervisor.Working hours: 3:00 AM - 1:00 PMSkills:- High level communicator (written and verbal)- Mechanically and technically inclined- MUST have forklift experience.Education:High SchoolExperience:1-4 yearsQualifications:- Experience using and maintaining production equipment- Experience working in a production environment - MUST have forklift experience. Apply now, or feel free to forward your resume to: charlesthompson@spherion.com. Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Lafayette, Louisiana
      • Permanent
      • $65,000 - $80,000 per year
      • 8:00 AM - 5:00 PM
      Spherion is recruiting for the position of Accountant (CPA). Client is seeking someone with a CPA license or is eligible to sit for the CPA. Candidates would need to present 5 years of experience with individual, partnership and corporate tax returns. You bring Client offers a very attractive benefits package. This is the type of firm where people go to retire. They are willing to be very competitive in their pay, benefits, etc. This is a straight forward position: Someone with a degree and experience with taxes. The more experience you bring to the table, the higher the starting salary. Let's talk, what have you got to lose?? Again, my client is seeking someone with their CPA, or someone who is eligible to sit for the CPA license.Responsibilities:*Will need to have experience with individual, partnership and corporate returnsWorking hours: 8:00 AM - 5:00 PMSkills:*Knowledge/experience with the laws of taxes as it relates to individuals, partnerships and corporationsEducation:BachelorsExperience:4-7 yearsQualifications:*5+ years of experience with tax work on individuals, partnerships or corporations Log onto www.spherion.com and apply for the Accountant - CPA position.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is recruiting for the position of Accountant (CPA). Client is seeking someone with a CPA license or is eligible to sit for the CPA. Candidates would need to present 5 years of experience with individual, partnership and corporate tax returns. You bring Client offers a very attractive benefits package. This is the type of firm where people go to retire. They are willing to be very competitive in their pay, benefits, etc. This is a straight forward position: Someone with a degree and experience with taxes. The more experience you bring to the table, the higher the starting salary. Let's talk, what have you got to lose?? Again, my client is seeking someone with their CPA, or someone who is eligible to sit for the CPA license.Responsibilities:*Will need to have experience with individual, partnership and corporate returnsWorking hours: 8:00 AM - 5:00 PMSkills:*Knowledge/experience with the laws of taxes as it relates to individuals, partnerships and corporationsEducation:BachelorsExperience:4-7 yearsQualifications:*5+ years of experience with tax work on individuals, partnerships or corporations Log onto www.spherion.com and apply for the Accountant - CPA position.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Lafayette, Louisiana
      • Permanent
      • $20.00 - $25.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion is recruiting for the position of Mechanical Technician. This is a Direct hire order and what I would consider a career move. Typical duties will be to assemble equipment when skid and parts are ready, troubleshoot and test machinery, identify malfunctions and resolve issues. Overtime is almost a given at some point during the various projects. my client is seeking someone who is wanting to find a home and grow... If you have experience building equipment according to P&E drawings, we need to talk!!!Responsibilities:*Build equipment correctly according to P&E drawings, ensuring equipment meets customer requirements and expectations*Troubleshoot and test machinery and equipment*Assemble equipment when skid and parts are ready*Complete adjustments during the fabrication process based on punch lists*Travel to customer locations to troubleshoot and repair rental equipment and customer owned equipment*Communicate material needs to the Shop Manager*Communicate with Shipping and Receiving lead regarding partsWorking hours: 8:00 AM - 5:00 PMSkills:*Build equipment correctly according to P&E drawings, ensuring equipment meets customer requirements and expectations*Troubleshoot and test machinery and equipment*Assemble equipment when skid and parts are ready*Complete adjustments during the fabrication process based on punch lists*Travel to customer locations to troubleshoot and repair rental equipment and customer owned equipment*Communicate material needs to the Shop Manager*Communicate with Shipping and Receiving lead regarding partsEducation:AssociateExperience:1-4 yearsQualifications:*At least 3 years of experience performing he above duties*Fiberglass Reinforce Piping experience is a HUGE advantage www.spherion.com and apply for the Mechanical Technician positionSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is recruiting for the position of Mechanical Technician. This is a Direct hire order and what I would consider a career move. Typical duties will be to assemble equipment when skid and parts are ready, troubleshoot and test machinery, identify malfunctions and resolve issues. Overtime is almost a given at some point during the various projects. my client is seeking someone who is wanting to find a home and grow... If you have experience building equipment according to P&E drawings, we need to talk!!!Responsibilities:*Build equipment correctly according to P&E drawings, ensuring equipment meets customer requirements and expectations*Troubleshoot and test machinery and equipment*Assemble equipment when skid and parts are ready*Complete adjustments during the fabrication process based on punch lists*Travel to customer locations to troubleshoot and repair rental equipment and customer owned equipment*Communicate material needs to the Shop Manager*Communicate with Shipping and Receiving lead regarding partsWorking hours: 8:00 AM - 5:00 PMSkills:*Build equipment correctly according to P&E drawings, ensuring equipment meets customer requirements and expectations*Troubleshoot and test machinery and equipment*Assemble equipment when skid and parts are ready*Complete adjustments during the fabrication process based on punch lists*Travel to customer locations to troubleshoot and repair rental equipment and customer owned equipment*Communicate material needs to the Shop Manager*Communicate with Shipping and Receiving lead regarding partsEducation:AssociateExperience:1-4 yearsQualifications:*At least 3 years of experience performing he above duties*Fiberglass Reinforce Piping experience is a HUGE advantage www.spherion.com and apply for the Mechanical Technician positionSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Carencro, Louisiana
      • Permanent
      • $40,000 - $45,000 per year
      • 8:00 AM - 5:00 PM
      Spherion is recruiting for the position of Inside Sales. This is a Direct Hire order that comes with a salary and bonus potential. To some degree, this is an entry level position, if you have ever wanted to get into Sales, but did not have the experience required, well here is your opportunity. Client is a family owned and operated pipe yard that has been around forever. You really don't need to have experience/knowledge of pipe, as you will be working and learning right along VP, grooming yourself for future growth. This is a career move. You will be given all the materials, tools and guidance to learn about pipe. Company will develop you into a rewarding career that could allow you to transition into outside sales. Company offers a base salary, along with a SEP (simplified employee pension plan) at the end of the year - 3% to15% of annual salary, and on top of that, there is bonus potential!!!Responsibilities:*Work with existing freight vendors*Work on deliveries of pipe to oil rigs, these are usually time sensitive runs, you will need to use approved vendors*Coordinating loadouts to third party vendors*Support sales with gathering quotes, responding to customer needs*Create a weekly "Sales - Inventory of pipe yard*Manager social media accounts*Make cold calls to find pipe to buy. Leads will be providedWorking hours: 8:00 AM - 5:00 PMSkills:*You must be willing to learn all there is about pipe, including OD, how to inspect pipe in the field*Ready to absorb the knowledge about the various uses and types of pipe*Have a professional manner, presentation and attitude to develop relationships with clients*Ability to work with Outside Sales members, as well as other members of the teamEducation:AssociateExperience:1-4 yearsQualifications:*At least 2 years of experience with Inside Sales would be preferred, but not necessary*Possess excellent communication skills*Have a positive attitude and work ethic*be open- minded as you are being coached to learn this industry To apply for this incredible opportunity, log onto www.spherion.com and apply for the Inside Sales position. No phone calls to Office.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is recruiting for the position of Inside Sales. This is a Direct Hire order that comes with a salary and bonus potential. To some degree, this is an entry level position, if you have ever wanted to get into Sales, but did not have the experience required, well here is your opportunity. Client is a family owned and operated pipe yard that has been around forever. You really don't need to have experience/knowledge of pipe, as you will be working and learning right along VP, grooming yourself for future growth. This is a career move. You will be given all the materials, tools and guidance to learn about pipe. Company will develop you into a rewarding career that could allow you to transition into outside sales. Company offers a base salary, along with a SEP (simplified employee pension plan) at the end of the year - 3% to15% of annual salary, and on top of that, there is bonus potential!!!Responsibilities:*Work with existing freight vendors*Work on deliveries of pipe to oil rigs, these are usually time sensitive runs, you will need to use approved vendors*Coordinating loadouts to third party vendors*Support sales with gathering quotes, responding to customer needs*Create a weekly "Sales - Inventory of pipe yard*Manager social media accounts*Make cold calls to find pipe to buy. Leads will be providedWorking hours: 8:00 AM - 5:00 PMSkills:*You must be willing to learn all there is about pipe, including OD, how to inspect pipe in the field*Ready to absorb the knowledge about the various uses and types of pipe*Have a professional manner, presentation and attitude to develop relationships with clients*Ability to work with Outside Sales members, as well as other members of the teamEducation:AssociateExperience:1-4 yearsQualifications:*At least 2 years of experience with Inside Sales would be preferred, but not necessary*Possess excellent communication skills*Have a positive attitude and work ethic*be open- minded as you are being coached to learn this industry To apply for this incredible opportunity, log onto www.spherion.com and apply for the Inside Sales position. No phone calls to Office.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Iberia, Louisiana
      • Temporary
      • $12.00 - $14.00 per hour
      • 8:00 AM - 4:00 PM
      Spherion is seeking an Administrative Assistant for a 2 week assignment for a New Iberia Company.Casual Dress: closed toe shoes (NO Sandals) Jeans are okShift: Monday - Friday 8a-4pHourly Pay Rate: $12 - $14; DOEResponsibilities:Answering Multi-Line (5 lines) Phones - Sending and Receiving EmailsMatching Tickets for Accounts PayableWorking hours: 8:00 AM - 4:00 PMSkills:Outlook experience requiredExcel preferredEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or Equivalent Apply online: www.spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is seeking an Administrative Assistant for a 2 week assignment for a New Iberia Company.Casual Dress: closed toe shoes (NO Sandals) Jeans are okShift: Monday - Friday 8a-4pHourly Pay Rate: $12 - $14; DOEResponsibilities:Answering Multi-Line (5 lines) Phones - Sending and Receiving EmailsMatching Tickets for Accounts PayableWorking hours: 8:00 AM - 4:00 PMSkills:Outlook experience requiredExcel preferredEducation:High SchoolExperience:1-4 yearsQualifications:High School Diploma or Equivalent Apply online: www.spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Opelousas, Louisiana
      • Temp to Perm
      • $9.00 per hour
      • 7:00 AM - 4:00 PM
      Spherion has a temp to hire production position in the OPELOUSAS, LA area. Shift Mon-Friday 7am-4pm with an hourly rate of $9.00Responsibilities:Responsible for working a production line capping bottles and containers and packaging them.Working hours: 7:00 AM - 4:00 PMSkills:Attention to detail and accuracy is very important.Education:High SchoolExperience:0-1 yearsQualifications:High school diploma or GED.Preferably at least 1 year of warehouse/production experience. Apply online then call the office a 337-269-0508 today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has a temp to hire production position in the OPELOUSAS, LA area. Shift Mon-Friday 7am-4pm with an hourly rate of $9.00Responsibilities:Responsible for working a production line capping bottles and containers and packaging them.Working hours: 7:00 AM - 4:00 PMSkills:Attention to detail and accuracy is very important.Education:High SchoolExperience:0-1 yearsQualifications:High school diploma or GED.Preferably at least 1 year of warehouse/production experience. Apply online then call the office a 337-269-0508 today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Orleans, Louisiana
      • Temp to Perm
      • $18.00 per hour
      • 3:00 AM - 1:00 PM
      Our client in the beverage industry is seeking an experienced machine operator to assist with production. This customer is one of the most recognizable brands in the world and this is a great opportunity to begin your career with them. Feel free to reach out directly should you have any questions regarding the role: 504-455-6565/spherionneworleans@spherion.com. - Pay rate: $18.00 hourly - Must be able to work weekends.- Shift: 3:00 AM - 1:00 PMResponsibilities:- Responsible for operating various manual and automated equipment in the production process. - Set up machinery and ensure all production materials are available. - Operate and monitor equipment and replenish materials as needed. - Visually inspect production run and document results. - Determine and report malfunctions to appropriate parties. - Maintain cleanliness of equipment and assigned area. - Other duties as assigned by supervisor.Working hours: 3:00 AM - 1:00 PMSkills:- High level communicator (written and verbal)- Mechanically and technically inclined- MUST have forklift experience.Education:High SchoolExperience:1-4 yearsQualifications:- Experience using and maintaining production equipment- Experience working in a production environment - MUST have forklift experience. Apply now, or feel free to forward your resume to: charlesthompson@spherion.com. Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client in the beverage industry is seeking an experienced machine operator to assist with production. This customer is one of the most recognizable brands in the world and this is a great opportunity to begin your career with them. Feel free to reach out directly should you have any questions regarding the role: 504-455-6565/spherionneworleans@spherion.com. - Pay rate: $18.00 hourly - Must be able to work weekends.- Shift: 3:00 AM - 1:00 PMResponsibilities:- Responsible for operating various manual and automated equipment in the production process. - Set up machinery and ensure all production materials are available. - Operate and monitor equipment and replenish materials as needed. - Visually inspect production run and document results. - Determine and report malfunctions to appropriate parties. - Maintain cleanliness of equipment and assigned area. - Other duties as assigned by supervisor.Working hours: 3:00 AM - 1:00 PMSkills:- High level communicator (written and verbal)- Mechanically and technically inclined- MUST have forklift experience.Education:High SchoolExperience:1-4 yearsQualifications:- Experience using and maintaining production equipment- Experience working in a production environment - MUST have forklift experience. Apply now, or feel free to forward your resume to: charlesthompson@spherion.com. Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Carencro, Louisiana
      • Temp to Perm
      • $16.80 - $19.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion is seeking an Accounts Receivable Clerk in the Carencro area. This position is to provide financial, clerical and administrative services to ensure efficient, timely and accurate payment under his or her control.Shift: Mon-Friday 8a-5pPay Rate: $16.80 - $19.00/hr.Responsibilities:Maintain up to date billing systemCarry out billing, collection and reporting activities according to specific deadlinesResearch and negotiate charge back claimsPrepare debit and credit memos, and send to Accounts Receivable ManagerEnsure and maintain returns being processed in house and make sure the chargeback amount does not exceed the total authorized amount.Communicates with customers via phone, email, mail or personallySend unbilled activity report to all appropriate personnel.Working hours: 8:00 AM - 5:00 PMSkills:Knowledgeable in general book keeping proceduresMust have an understanding of relevant computer applicationsMust have problem solving, organizational, decision making, interpersonal and good communication skills.Works well under pressure and tolerates stress.Education:BachelorsExperience:1-4 yearsQualifications:Bachelors Degree Preferred1-3 years accounts receivable and general accounting experience Apply online: www.spherion.com and call 337-269-0508Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is seeking an Accounts Receivable Clerk in the Carencro area. This position is to provide financial, clerical and administrative services to ensure efficient, timely and accurate payment under his or her control.Shift: Mon-Friday 8a-5pPay Rate: $16.80 - $19.00/hr.Responsibilities:Maintain up to date billing systemCarry out billing, collection and reporting activities according to specific deadlinesResearch and negotiate charge back claimsPrepare debit and credit memos, and send to Accounts Receivable ManagerEnsure and maintain returns being processed in house and make sure the chargeback amount does not exceed the total authorized amount.Communicates with customers via phone, email, mail or personallySend unbilled activity report to all appropriate personnel.Working hours: 8:00 AM - 5:00 PMSkills:Knowledgeable in general book keeping proceduresMust have an understanding of relevant computer applicationsMust have problem solving, organizational, decision making, interpersonal and good communication skills.Works well under pressure and tolerates stress.Education:BachelorsExperience:1-4 yearsQualifications:Bachelors Degree Preferred1-3 years accounts receivable and general accounting experience Apply online: www.spherion.com and call 337-269-0508Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Orleans, Louisiana
      • Temp to Perm
      • $15.00 - $18.00 per hour
      • 8:00 AM - 5:00 PM
      A Medical Billing Specialist, is responsible for organizing patient medical costs and sending invoices to collect payment from patients and their insurers. Their duties include calling patients to discuss payment and develop reasonable payment plans, entering patient data into administrative systems and recording information about outstanding claims.Responsibilities:Perform posting chargesPerform completion of claims to payersConduct duties in a professional and timely fashionSubmit billing data to the appropriate insurance providersProcess claimsResolve denial instancesAchieve maximum reimbursement for services providedDeploy, maintain and report on various programsDo Medicare reviewsConduct auditsWorking hours: 8:00 AM - 5:00 PMSkills:Effective communication skillsBasic computer skills, such as sending emails, typing, and using spreadsheetsInteract virtually with clients and patientsCreative problem-solving skillsWork independentlyMultitaskEducation:AssociateExperience:1-4 yearsQualifications:Minimum of 3 years experience in medical billing or any coding industryProficient in electronic medical records Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com. Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A Medical Billing Specialist, is responsible for organizing patient medical costs and sending invoices to collect payment from patients and their insurers. Their duties include calling patients to discuss payment and develop reasonable payment plans, entering patient data into administrative systems and recording information about outstanding claims.Responsibilities:Perform posting chargesPerform completion of claims to payersConduct duties in a professional and timely fashionSubmit billing data to the appropriate insurance providersProcess claimsResolve denial instancesAchieve maximum reimbursement for services providedDeploy, maintain and report on various programsDo Medicare reviewsConduct auditsWorking hours: 8:00 AM - 5:00 PMSkills:Effective communication skillsBasic computer skills, such as sending emails, typing, and using spreadsheetsInteract virtually with clients and patientsCreative problem-solving skillsWork independentlyMultitaskEducation:AssociateExperience:1-4 yearsQualifications:Minimum of 3 years experience in medical billing or any coding industryProficient in electronic medical records Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com. Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Broussard, Louisiana
      • Temp to Perm
      • $13.00 per hour
      • 6:00 AM - 6:15 PM
      Spherion is recruiting for Quality Controllers for a manufacturing company in Broussard. This is a temp-to-hire position!Shift is 6AM - 6:15PM, Rotating days on/off$13/hr., pay will increase for Perm employees.Responsibilities:Check product for defectsWeight productBox productWorking hours: 6:00 AM - 6:15 PMSkills:Attention to DetailReliabilityEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or GEDMust pass screening requirements Apply online, then call the office at 337-269-0508 today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is recruiting for Quality Controllers for a manufacturing company in Broussard. This is a temp-to-hire position!Shift is 6AM - 6:15PM, Rotating days on/off$13/hr., pay will increase for Perm employees.Responsibilities:Check product for defectsWeight productBox productWorking hours: 6:00 AM - 6:15 PMSkills:Attention to DetailReliabilityEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or GEDMust pass screening requirements Apply online, then call the office at 337-269-0508 today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Orleans, Louisiana
      • Temp to Perm
      • $18.00 - $22.00 per hour
      • 3:00 AM - 1:00 PM
      -Our client in the beverage industry is seeking an experienced machine operator to assist with production. This customer is one of the most recognizable brands in the world and this is a great opportunity to begin your career with them. Feel free to reach out directly should you have any questions regarding the role: 504-455-6565/spherionneworleans@spherion.com. - Pay rate: $18 -22.00 hourly - Must be able to work weekends.- Shift: 3:00 AM - 1:00 PMResponsibilities:- Responsible for operating various manual and automated equipment in the production process. - Set up machinery and ensure all production materials are available. - Operate and monitor equipment and replenish materials as needed. - Visually inspect production run and document results. - Determine and report malfunctions to appropriate parties. - Maintain cleanliness of equipment and assigned area. - Other duties as assigned by supervisor.Working hours: 3:00 AM - 1:00 PMSkills:- High level communicator (written and verbal)- Mechanically and technically inclined- MUST have forklift experience.Education:High SchoolExperience:1-4 yearsQualifications:- Experience using and maintaining production equipment- Experience working in a production environment - MUST have forklift experience. Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      -Our client in the beverage industry is seeking an experienced machine operator to assist with production. This customer is one of the most recognizable brands in the world and this is a great opportunity to begin your career with them. Feel free to reach out directly should you have any questions regarding the role: 504-455-6565/spherionneworleans@spherion.com. - Pay rate: $18 -22.00 hourly - Must be able to work weekends.- Shift: 3:00 AM - 1:00 PMResponsibilities:- Responsible for operating various manual and automated equipment in the production process. - Set up machinery and ensure all production materials are available. - Operate and monitor equipment and replenish materials as needed. - Visually inspect production run and document results. - Determine and report malfunctions to appropriate parties. - Maintain cleanliness of equipment and assigned area. - Other duties as assigned by supervisor.Working hours: 3:00 AM - 1:00 PMSkills:- High level communicator (written and verbal)- Mechanically and technically inclined- MUST have forklift experience.Education:High SchoolExperience:1-4 yearsQualifications:- Experience using and maintaining production equipment- Experience working in a production environment - MUST have forklift experience. Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Lafayette, Louisiana
      • Temporary
      • $10.00 per hour
      • 8:00 AM - 6:00 PM
      We have a 2 week Warehouse job available in Lafayette for a local furniture store. Heavy lifting required. Need steel toed work shoes. Starts Sat 3/5M-Sat 8a-5/6p, 40 hr/wk. OT possible $10/hResponsibilities:Unloading trucks, helping to load customers' orders, and moving product around the warehouse.Working hours: 8:00 AM - 6:00 PMSkills:Must be able to lift and move up to 50 pounds throughout the shift.Education:No Degree RequiredExperience:0-1 yearsQualifications:ReliableTask Oriented Apply online, then call the office at 337-269-0508 today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have a 2 week Warehouse job available in Lafayette for a local furniture store. Heavy lifting required. Need steel toed work shoes. Starts Sat 3/5M-Sat 8a-5/6p, 40 hr/wk. OT possible $10/hResponsibilities:Unloading trucks, helping to load customers' orders, and moving product around the warehouse.Working hours: 8:00 AM - 6:00 PMSkills:Must be able to lift and move up to 50 pounds throughout the shift.Education:No Degree RequiredExperience:0-1 yearsQualifications:ReliableTask Oriented Apply online, then call the office at 337-269-0508 today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Broussard, Louisiana
      • Temp to Perm
      • $18.00 - $20.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion is recruiting for an A/R - Collections person. This is a solid Temp to Hire position with a company that will offer a complete benefits package once you go perm. Ideal candidates will need to provide at least 4 years of experience with A/R, Collections, enter/import invoices into customer invoicing websites/portals (SAP/Ariba), reporting daily/weekly status updates with problem accounts, etc. Advanced Microsoft (Excel) skills is a must.Responsibilities:*Supervise assigned accounts to identify unresolved debts*Contact clients as needed via email, phone and mail*Develop effective repayment plans*Report daily/weekly status updates to Corporate Controller and CFO*Research and resolve customer billing problems*Process merchant credit card transactions for payment of invoicesWorking hours: 8:00 AM - 5:00 PMSkills:*Knowledge of A/R and Collections duties*Effectively handle multiple projects*Experience with creating and distributing monthly customer statements*Knowledge on contacting customers and arranging repaymentsEducation:AssociateExperience:4-7 yearsQualifications:*Experience in SAP, Ariba, Openinvoice and/or Open Ticket*Advanced experience with Microsoft Office, including advanced Excel skills*Degree preferred, however, 5+ solid years of A/R and Collections experience will be considered Go to www.spherion.com and apply for the A/R - Collections position.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is recruiting for an A/R - Collections person. This is a solid Temp to Hire position with a company that will offer a complete benefits package once you go perm. Ideal candidates will need to provide at least 4 years of experience with A/R, Collections, enter/import invoices into customer invoicing websites/portals (SAP/Ariba), reporting daily/weekly status updates with problem accounts, etc. Advanced Microsoft (Excel) skills is a must.Responsibilities:*Supervise assigned accounts to identify unresolved debts*Contact clients as needed via email, phone and mail*Develop effective repayment plans*Report daily/weekly status updates to Corporate Controller and CFO*Research and resolve customer billing problems*Process merchant credit card transactions for payment of invoicesWorking hours: 8:00 AM - 5:00 PMSkills:*Knowledge of A/R and Collections duties*Effectively handle multiple projects*Experience with creating and distributing monthly customer statements*Knowledge on contacting customers and arranging repaymentsEducation:AssociateExperience:4-7 yearsQualifications:*Experience in SAP, Ariba, Openinvoice and/or Open Ticket*Advanced experience with Microsoft Office, including advanced Excel skills*Degree preferred, however, 5+ solid years of A/R and Collections experience will be considered Go to www.spherion.com and apply for the A/R - Collections position.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Lafayette, Louisiana
      • Temporary
      • $10.00 per hour
      • 12:00 AM - 5:00 AM
      Spherion is recruiting for a Part Time Dock Associate for a warehouse in Lafayette. 12am-5am $10/hr.Responsibilities:This position will work on the dock sorting, loading/unloading, and handling freight overnight. Unload parts product packages from trucks Maintain accuracy when sorting out packages based on customer and delivery routes Use of RF scanner to allow package tracking Load packages back onto trucks for delivery Working in a fast paced environment to meet critical deadlinesWorking hours: 12:00 AM - 5:00 AMSkills:- Use of RF scanners is a plus - Must be able to lift up to 50lbs as needed - Ability to work with little supervisionEducation:High SchoolExperience:0-1 yearsQualifications:DependableValid driver's license and Reliable Transportation High school diploma or equivalent Previous dock/warehouse experience required Ability to meet background and drug screen requirements Apply online then call the office 337-269-0508.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is recruiting for a Part Time Dock Associate for a warehouse in Lafayette. 12am-5am $10/hr.Responsibilities:This position will work on the dock sorting, loading/unloading, and handling freight overnight. Unload parts product packages from trucks Maintain accuracy when sorting out packages based on customer and delivery routes Use of RF scanner to allow package tracking Load packages back onto trucks for delivery Working in a fast paced environment to meet critical deadlinesWorking hours: 12:00 AM - 5:00 AMSkills:- Use of RF scanners is a plus - Must be able to lift up to 50lbs as needed - Ability to work with little supervisionEducation:High SchoolExperience:0-1 yearsQualifications:DependableValid driver's license and Reliable Transportation High school diploma or equivalent Previous dock/warehouse experience required Ability to meet background and drug screen requirements Apply online then call the office 337-269-0508.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Orleans, Louisiana
      • Temporary
      • $17.00 - $18.00 per hour
      • 4:00 AM - 1:00 PM
      Put your skills to the test!Spherion is seeking a Quality Assurance Lab Technician to work with our client in Harahan, LA. This is temporary role that requires attention to detail, experience and accuracy.Are you up for the challenge and willing to work with a large organization with a global presence? If so, apply today for immediate consideration. This is a Temporary/Contract Role paying $17-$18/hr based on experience. Hours are 4am-1pm Monday -Friday with weekly paychecks.Responsibilities:Perform beverage attribute testing to include: Brix, Assay, CO2, Net Contents, pH and Taste & Odor Perform package attribute testing to include: Closure Removal Torques, Can Lid Application (Where Applicable), and Visual Appearance Perform finished product attributes such as: Correct Bottle/Can, Correct Closure/Lid, Correct Label, Correct Production Date Code to include final packaging (Cases, Cartons, Trays, Wraps, etc.) and verification of any Promotional Identification Perform Micro sample collection and testing (Note: A designated technician may be selected for Micro testing, in some cases, removing this responsibility from the remaining technicians) Perform Syrup testing such as Brix, Assay, pH to include the use of an ultra-performance liquid chromatography (UPLC) or a high-performance liquid chromatography (HPLC) unit. (Note: Blending Technicians may be selected for Syrup testing, in some cases, removing this responsibility from Lab Technicians) Perform lab equipment calibrations and/or verifications as needed. Lab equipment maintenance and problem troubleshoot is required as needed Perform water treatment duties as described by the Quality Manager where applicable Perform Internal Clean in Place (CIP) setup as described by the Quality Manager where applicable Participate in the Sensory Program where applicable Data entry from product testing is required in Laboratory Data Management System (LDMS) to include review of test results and reaction should an out of specification situation arise. Knowledge of the Product Hold program (when to use and when not to use) is a must. Assist in writing standard operating procedures (SOP's) as needed to include the use of Master Control Perform daily lab housekeeping to include good manufacturing practices (GMP) inside and outside the lab where needed Maintain lab testing equipment supplies to include ordering and inventory controlWorking hours: 4:00 AM - 1:00 PMSkills:Ability to maintain safety and security procedures of company assetsEffective math skillsEffective time management and organizational skills neededAttention to detail and analytical thinking skillsEducation:High SchoolExperience:1-4 yearsQualifications:Basic navigating knowledge of SAPProficiency in Microsoft ProgramsIn Depth knowledge of (LDMS) Laboratory Data management Systems preferred At Least 6 months of experience or training is required Following completion of your application, please give our office a call for immediate consideration. (504-455-6565)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Put your skills to the test!Spherion is seeking a Quality Assurance Lab Technician to work with our client in Harahan, LA. This is temporary role that requires attention to detail, experience and accuracy.Are you up for the challenge and willing to work with a large organization with a global presence? If so, apply today for immediate consideration. This is a Temporary/Contract Role paying $17-$18/hr based on experience. Hours are 4am-1pm Monday -Friday with weekly paychecks.Responsibilities:Perform beverage attribute testing to include: Brix, Assay, CO2, Net Contents, pH and Taste & Odor Perform package attribute testing to include: Closure Removal Torques, Can Lid Application (Where Applicable), and Visual Appearance Perform finished product attributes such as: Correct Bottle/Can, Correct Closure/Lid, Correct Label, Correct Production Date Code to include final packaging (Cases, Cartons, Trays, Wraps, etc.) and verification of any Promotional Identification Perform Micro sample collection and testing (Note: A designated technician may be selected for Micro testing, in some cases, removing this responsibility from the remaining technicians) Perform Syrup testing such as Brix, Assay, pH to include the use of an ultra-performance liquid chromatography (UPLC) or a high-performance liquid chromatography (HPLC) unit. (Note: Blending Technicians may be selected for Syrup testing, in some cases, removing this responsibility from Lab Technicians) Perform lab equipment calibrations and/or verifications as needed. Lab equipment maintenance and problem troubleshoot is required as needed Perform water treatment duties as described by the Quality Manager where applicable Perform Internal Clean in Place (CIP) setup as described by the Quality Manager where applicable Participate in the Sensory Program where applicable Data entry from product testing is required in Laboratory Data Management System (LDMS) to include review of test results and reaction should an out of specification situation arise. Knowledge of the Product Hold program (when to use and when not to use) is a must. Assist in writing standard operating procedures (SOP's) as needed to include the use of Master Control Perform daily lab housekeeping to include good manufacturing practices (GMP) inside and outside the lab where needed Maintain lab testing equipment supplies to include ordering and inventory controlWorking hours: 4:00 AM - 1:00 PMSkills:Ability to maintain safety and security procedures of company assetsEffective math skillsEffective time management and organizational skills neededAttention to detail and analytical thinking skillsEducation:High SchoolExperience:1-4 yearsQualifications:Basic navigating knowledge of SAPProficiency in Microsoft ProgramsIn Depth knowledge of (LDMS) Laboratory Data management Systems preferred At Least 6 months of experience or training is required Following completion of your application, please give our office a call for immediate consideration. (504-455-6565)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Luling, Louisiana
      • Temp to Perm
      • $37.00 - $40.00 per hour
      • 8:00 AM - 5:00 PM
      We have an opening for a Chemical Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates.Responsibilities:? Complete process engineering design for all projects when required? Work in conjunction with area personnel and management to develop project justification ? Validate project improvements and cost savings associated with project after implementation? Mark up P&IDs as required for all projects? Modification of PFDs, material and/or energy balances? Modification of other pertinent parts of the PMF (e.g. operating procedures, JTA?s, LOTO?s)? Development of process control definition? Provide instrument process data? In conjunction with area personnel develop and execute operator training for projects? Coordinate project MOCs? Conduct/direct all project PHA?s and reviews up to and including hazard and operability (HAZOP) studies? Ensure that all aspects of a modification or project meet environmental regulations? Participate in project safety walk-throughs? In conjunction with area engineers assist in checkout, commissioning and startup of new projectsWorking hours: 8:00 AM - 5:00 PMSkills:- Ability to present and explain project detail to all levels of management.- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, andEducation:BachelorsExperience:4-7 yearsQualifications:? 3-7 years experience in a chemical manufacturing facility (Intermediate Process Engineer) ? Experience leading and executing capital projects in a chemical manufacturing facility ? Experience with Equipment Sizing Calculations and Design (Pumps, Valves, Piping, Instruments) Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have an opening for a Chemical Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates.Responsibilities:? Complete process engineering design for all projects when required? Work in conjunction with area personnel and management to develop project justification ? Validate project improvements and cost savings associated with project after implementation? Mark up P&IDs as required for all projects? Modification of PFDs, material and/or energy balances? Modification of other pertinent parts of the PMF (e.g. operating procedures, JTA?s, LOTO?s)? Development of process control definition? Provide instrument process data? In conjunction with area personnel develop and execute operator training for projects? Coordinate project MOCs? Conduct/direct all project PHA?s and reviews up to and including hazard and operability (HAZOP) studies? Ensure that all aspects of a modification or project meet environmental regulations? Participate in project safety walk-throughs? In conjunction with area engineers assist in checkout, commissioning and startup of new projectsWorking hours: 8:00 AM - 5:00 PMSkills:- Ability to present and explain project detail to all levels of management.- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, andEducation:BachelorsExperience:4-7 yearsQualifications:? 3-7 years experience in a chemical manufacturing facility (Intermediate Process Engineer) ? Experience leading and executing capital projects in a chemical manufacturing facility ? Experience with Equipment Sizing Calculations and Design (Pumps, Valves, Piping, Instruments) Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Luling, Louisiana
      • Temp to Perm
      • $60.00 - $70.00 per hour
      • 8:00 AM - 5:00 PM
      Our client is looking for an experienced Project Engineer with a focus in electrical engineering. The incumbent will report to the Site Project Engineering Manager and is responsible for overseeing and executing projects with an emphasis on electrical and instrumentation engineering activities, including: electrical equipment calculations, electrical equipment specification and design, instrumentation specification and design, work plan writing and preparation, cost estimation, equipment procurement, system startup, data management and reporting, and system troubleshooting (as required).Responsibilities:Project Management:- Manage multiple tasks to ensure projects are completed on time and on budget, with a high degree of internal and external client satisfaction.- Communicate project/task status and issues with project manager, client and/or company management.- Coordination and management of material vendors, subcontractors, and company staff- Maintain and report on a project budget and schedule to meet project expectations- Develop project estimates (budget and schedule) to secure funding- Use engineering discipline and experience to solve project issues during installation- Locate project drawings and provide initial markups to drafting for incorporation- Able to independently define the course of action and seek out the information and resources necessary to complete that courseDesign Engineering:- Oversee and prepare designs and work plans, from conceptual design through detailed design packages. Primary focus is on the electrical engineering aspect; however, expect involvement in other aspects of the design process. Electrical design tasks may include electrical load calculations, short-circuit and overcurrent protection calculations, transformer and wire/cable sizing. Other typical design aspects may include preparation of tray routing, wire routes, etc.- Develop electrical equipment and power distribution equipment specifications; prepare electrical load calculations for single and three phase loads; sketch/mark up electrical single line drawings, schematics and detail drawings as required.- Develop cable schedules, instrument indices, equipment lists, and material takeoffs; prepare requests for bids for subcontractors and material vendors. Prepare construction and equipment specifications, including means and methods. Compare bids and recommend the selection of subcontractors and material vendors.- Perform field visits on new project opportunities to determine the available site power, and utility/facility constraints, collect information regarding construction permits, evaluate potential site support contractors, and assist with preparation of cost estimates.- Lead electrical design aspects of company projects- Work with site DCS team to implement changes to the DCS as it applies to assigned projects- Understanding of and experience working with various voltage levels including: 24VDC, 120VAC, 480VAC, 2400VAC, and 15kV- Understanding of and experience working with instrumentation systems including: 4-20ma, 0-5VDC, and 0-10VDCWorking hours: 8:00 AM - 5:00 PMSkills:Skills/Aptitudes:- Self-starter and outgoing personality traits- Demonstrated leadership skills- Ability to take direction and act independently- Strong communications and organization skills- Ability to manage multiple priorities and stay organized while doing soLevel of Supervision:- Work independently based on general instructions, directions or objectivesEducation:BachelorsExperience:4-7 yearsQualifications:- BS or higher Electrical Engineering degree- Advanced training & experience in electrical power system design & distribution- At least 10 years electrical engineering experience- Prefer at least 5 years experience in c
      Our client is looking for an experienced Project Engineer with a focus in electrical engineering. The incumbent will report to the Site Project Engineering Manager and is responsible for overseeing and executing projects with an emphasis on electrical and instrumentation engineering activities, including: electrical equipment calculations, electrical equipment specification and design, instrumentation specification and design, work plan writing and preparation, cost estimation, equipment procurement, system startup, data management and reporting, and system troubleshooting (as required).Responsibilities:Project Management:- Manage multiple tasks to ensure projects are completed on time and on budget, with a high degree of internal and external client satisfaction.- Communicate project/task status and issues with project manager, client and/or company management.- Coordination and management of material vendors, subcontractors, and company staff- Maintain and report on a project budget and schedule to meet project expectations- Develop project estimates (budget and schedule) to secure funding- Use engineering discipline and experience to solve project issues during installation- Locate project drawings and provide initial markups to drafting for incorporation- Able to independently define the course of action and seek out the information and resources necessary to complete that courseDesign Engineering:- Oversee and prepare designs and work plans, from conceptual design through detailed design packages. Primary focus is on the electrical engineering aspect; however, expect involvement in other aspects of the design process. Electrical design tasks may include electrical load calculations, short-circuit and overcurrent protection calculations, transformer and wire/cable sizing. Other typical design aspects may include preparation of tray routing, wire routes, etc.- Develop electrical equipment and power distribution equipment specifications; prepare electrical load calculations for single and three phase loads; sketch/mark up electrical single line drawings, schematics and detail drawings as required.- Develop cable schedules, instrument indices, equipment lists, and material takeoffs; prepare requests for bids for subcontractors and material vendors. Prepare construction and equipment specifications, including means and methods. Compare bids and recommend the selection of subcontractors and material vendors.- Perform field visits on new project opportunities to determine the available site power, and utility/facility constraints, collect information regarding construction permits, evaluate potential site support contractors, and assist with preparation of cost estimates.- Lead electrical design aspects of company projects- Work with site DCS team to implement changes to the DCS as it applies to assigned projects- Understanding of and experience working with various voltage levels including: 24VDC, 120VAC, 480VAC, 2400VAC, and 15kV- Understanding of and experience working with instrumentation systems including: 4-20ma, 0-5VDC, and 0-10VDCWorking hours: 8:00 AM - 5:00 PMSkills:Skills/Aptitudes:- Self-starter and outgoing personality traits- Demonstrated leadership skills- Ability to take direction and act independently- Strong communications and organization skills- Ability to manage multiple priorities and stay organized while doing soLevel of Supervision:- Work independently based on general instructions, directions or objectivesEducation:BachelorsExperience:4-7 yearsQualifications:- BS or higher Electrical Engineering degree- Advanced training & experience in electrical power system design & distribution- At least 10 years electrical engineering experience- Prefer at least 5 years experience in c
      • Luling, Louisiana
      • Temp to Perm
      • $55.00 - $75.00 per hour
      • 8:00 AM - 5:00 PM
      We have an opening for a Mechanical Project Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates. The Intermediate Mechanical Project Engineer will support our diverse range of manufacturing projects. The incumbent will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis. This work will be performed under the supervision of the mechanical lead. The Intermediate Mechanical Project Engineer with serve as the project manager for their assigned projects for which they will also perform the mechanical engineering services for. This requires the incorporation of other disciplines to successfully complete the assigned projects on time and on budget.Apply today or if you would prefer to submit your resume via email or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Responsibilities:? Familiarity with and utilizing department design and drafting standards? Mastery of the client Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)? Development of preliminary project description, schedule, and cost estimates upon project assignment? Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations, and piping estimates.? Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.? Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project? Producing detailed design calculations and sketches for material of constructions associated with the project.? Reviewing and checking vendor / other discipline drawings for mechanical input? Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global client standards and conformance to good engineering practice? In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment? Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application, and knowledge of piping supports? Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)? Produce designs with efficient use of construction material with emphasis on ease of construction and meeting the project goals? Estimate and schedule professional service hours and assess the progress / quality of the mechanical work? Assist other engineers in developing and assembling scopes, drawings / specifications into packages, enabling mechanical purchase inquiries to be issued for procurement and materials or for subcontract pricing. This may include packaged equipment while soliciting input from other disciplines to provide requirements for associated structural, instrument and electrical aspects of the scope.? Perform fieldwork necessary to gather field date, check tie-ins and provide construction supportWorking hours: 8:00 AM - 5:00 PMSkills:- Excellent presentation skills- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, and improvingEducation:BachelorsExperience:7-10 yearsQualifications:? B.S. or M.S. in Mechanical Engineering from an accredited university? Professional Engineering (PE) registration is a plus? 5+ years of relevant industrial experience in mechanical engineering? Solid verbal and written communication and computer skills, Microsoft Suite? Proven leadership abilities and ability to influence in a non-traditional business environment? Unwavering ethics? Strong commitment to safety? Ability to work alone and as a true team player Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 (call or text) / spherionneworleans@spherion.com.Spherion will always protect your privacy: all discussions and communications are strictly confidential.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have an opening for a Mechanical Project Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates. The Intermediate Mechanical Project Engineer will support our diverse range of manufacturing projects. The incumbent will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis. This work will be performed under the supervision of the mechanical lead. The Intermediate Mechanical Project Engineer with serve as the project manager for their assigned projects for which they will also perform the mechanical engineering services for. This requires the incorporation of other disciplines to successfully complete the assigned projects on time and on budget.Apply today or if you would prefer to submit your resume via email or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Responsibilities:? Familiarity with and utilizing department design and drafting standards? Mastery of the client Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)? Development of preliminary project description, schedule, and cost estimates upon project assignment? Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations, and piping estimates.? Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.? Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project? Producing detailed design calculations and sketches for material of constructions associated with the project.? Reviewing and checking vendor / other discipline drawings for mechanical input? Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global client standards and conformance to good engineering practice? In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment? Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application, and knowledge of piping supports? Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)? Produce designs with efficient use of construction material with emphasis on ease of construction and meeting the project goals? Estimate and schedule professional service hours and assess the progress / quality of the mechanical work? Assist other engineers in developing and assembling scopes, drawings / specifications into packages, enabling mechanical purchase inquiries to be issued for procurement and materials or for subcontract pricing. This may include packaged equipment while soliciting input from other disciplines to provide requirements for associated structural, instrument and electrical aspects of the scope.? Perform fieldwork necessary to gather field date, check tie-ins and provide construction supportWorking hours: 8:00 AM - 5:00 PMSkills:- Excellent presentation skills- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, and improvingEducation:BachelorsExperience:7-10 yearsQualifications:? B.S. or M.S. in Mechanical Engineering from an accredited university? Professional Engineering (PE) registration is a plus? 5+ years of relevant industrial experience in mechanical engineering? Solid verbal and written communication and computer skills, Microsoft Suite? Proven leadership abilities and ability to influence in a non-traditional business environment? Unwavering ethics? Strong commitment to safety? Ability to work alone and as a true team player Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 (call or text) / spherionneworleans@spherion.com.Spherion will always protect your privacy: all discussions and communications are strictly confidential.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Luling, Louisiana
      • Temp to Perm
      • $50.00 - $80.00 per hour
      • 8:00 AM - 5:00 PM
      Our client is looking for a Senior Mechanical Project Engineer to support their diverse range of manufacturing projects. The senior mechanical engineer will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis.Responsibilities:- Mastery of the Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)- Development of preliminary project description, schedule and cost estimates upon project assignment- Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations and piping estimates.- Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.- Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project- Development of formal project scopes and capital request documentation- Producing detailed design calculations and sketches for material of constructions associated with the project.- Reviewing and checking vendor / other discipline drawings for mechanical input- Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global standards and conformance to good engineering practice- In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment- Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application and knowledge of piping supports- Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)- Recognize and communicate scope and design changes promptly- Consulting with design leaders from other disciplines to ensure smooth flow of vital information necessary for the scheduled completion of the project- Knowledge and understanding of schedule constraints and information requirements to produce all mechanical deliverables- Project Quality Assurance and Quality control direction and support- Project closureWorking hours: 8:00 AM - 5:00 PMSkills:- Strong Microstation (or similar) CAD and Excel spreadsheet skills required.- Ability to organize and maintain data file and folder structures- Ability to manage assigned tasks to meet timelines- Very detail oriented- Good Communication skillsEducation:BachelorsExperience:7-10 yearsQualifications:- B.S. or M.S. in Mechanical Engineering from an accredited university is required- Professional Engineering (PE) registration is a plus- 10+ years of relevant industrial experience in mechanical engineering- Strong project management and multitasking skills- Demonstrated creativity, innovation and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing and improving- Solid verbal and written communication and computer skills, Microsoft Suite- Proven leadership abilities and ability to influence in a non-traditional business environment- Unwavering ethics- Strong commitment to safety
      Our client is looking for a Senior Mechanical Project Engineer to support their diverse range of manufacturing projects. The senior mechanical engineer will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis.Responsibilities:- Mastery of the Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)- Development of preliminary project description, schedule and cost estimates upon project assignment- Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations and piping estimates.- Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.- Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project- Development of formal project scopes and capital request documentation- Producing detailed design calculations and sketches for material of constructions associated with the project.- Reviewing and checking vendor / other discipline drawings for mechanical input- Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global standards and conformance to good engineering practice- In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment- Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application and knowledge of piping supports- Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)- Recognize and communicate scope and design changes promptly- Consulting with design leaders from other disciplines to ensure smooth flow of vital information necessary for the scheduled completion of the project- Knowledge and understanding of schedule constraints and information requirements to produce all mechanical deliverables- Project Quality Assurance and Quality control direction and support- Project closureWorking hours: 8:00 AM - 5:00 PMSkills:- Strong Microstation (or similar) CAD and Excel spreadsheet skills required.- Ability to organize and maintain data file and folder structures- Ability to manage assigned tasks to meet timelines- Very detail oriented- Good Communication skillsEducation:BachelorsExperience:7-10 yearsQualifications:- B.S. or M.S. in Mechanical Engineering from an accredited university is required- Professional Engineering (PE) registration is a plus- 10+ years of relevant industrial experience in mechanical engineering- Strong project management and multitasking skills- Demonstrated creativity, innovation and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing and improving- Solid verbal and written communication and computer skills, Microsoft Suite- Proven leadership abilities and ability to influence in a non-traditional business environment- Unwavering ethics- Strong commitment to safety
      • Broussard, Louisiana
      • Permanent
      • $80,000 - $100,000 per year
      • 8:00 AM - 5:00 PM
      Spherion is recruiting for the position of Rope Access Manager, based out of their Broussard, La. location. The Rope Access Manager will be responsible for training, certifications, purchasing, inventory control support operations covering Rope Access Technicians. Rope Access is a form of work positioning where scaffolding or cradles cannot be used due to hard to reach places.Responsibilities:*Ensure that proper training of all Rope Access Technicians and are up to date on any needed/necessary certifications.Working hours: 8:00 AM - 5:00 PMSkills:*IRATA Level 1,2 & 3*SPRAT Level 1,2 & 3Confined space entrant , attendant, supervisor & rescuerEducation:No Degree RequiredExperience:4-7 yearsQualifications:*Rope Access Managers will need to provide experience/understanding of scope of work of Rope Access Technicians To apply, log onto www.spherion.com and apply for the Rope Access Manager position.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is recruiting for the position of Rope Access Manager, based out of their Broussard, La. location. The Rope Access Manager will be responsible for training, certifications, purchasing, inventory control support operations covering Rope Access Technicians. Rope Access is a form of work positioning where scaffolding or cradles cannot be used due to hard to reach places.Responsibilities:*Ensure that proper training of all Rope Access Technicians and are up to date on any needed/necessary certifications.Working hours: 8:00 AM - 5:00 PMSkills:*IRATA Level 1,2 & 3*SPRAT Level 1,2 & 3Confined space entrant , attendant, supervisor & rescuerEducation:No Degree RequiredExperience:4-7 yearsQualifications:*Rope Access Managers will need to provide experience/understanding of scope of work of Rope Access Technicians To apply, log onto www.spherion.com and apply for the Rope Access Manager position.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Luling, Louisiana
      • Temp to Perm
      • $70.00 - $90.00 per hour
      • 8:00 AM - 5:00 PM
      Our client is looking for a Senior Mechanical Project Engineer to support their diverse range of manufacturing projects. The senior mechanical engineer will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis.Responsibilities:- Mastery of the Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)- Development of preliminary project description, schedule and cost estimates upon project assignment- Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations and piping estimates.- Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.- Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project- Development of formal project scopes and capital request documentation- Producing detailed design calculations and sketches for material of constructions associated with the project.- Reviewing and checking vendor / other discipline drawings for mechanical input- Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global standards and conformance to good engineering practice- In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment- Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application and knowledge of piping supports- Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)- Recognize and communicate scope and design changes promptly- Consulting with design leaders from other disciplines to ensure smooth flow of vital information necessary for the scheduled completion of the project- Knowledge and understanding of schedule constraints and information requirements to produce all mechanical deliverables- Project Quality Assurance and Quality control direction and support- Project closureWorking hours: 8:00 AM - 5:00 PMSkills:- Strong Microstation (or similar) CAD and Excel spreadsheet skills required.- Ability to organize and maintain data file and folder structures- Ability to manage assigned tasks to meet timelines- Very detail oriented- Good Communication skillsEducation:BachelorsExperience:7-10 yearsQualifications:- B.S. or M.S. in Mechanical Engineering from an accredited university is required- Professional Engineering (PE) registration is a plus- 10+ years of relevant industrial experience in mechanical engineering- Strong project management and multitasking skills- Demonstrated creativity, innovation and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing and improving- Solid verbal and written communication and computer skills, Microsoft Suite- Proven leadership abilities and ability to influence in a non-traditional business environment- Unwavering ethics- Strong commitment to safety
      Our client is looking for a Senior Mechanical Project Engineer to support their diverse range of manufacturing projects. The senior mechanical engineer will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis.Responsibilities:- Mastery of the Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)- Development of preliminary project description, schedule and cost estimates upon project assignment- Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations and piping estimates.- Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.- Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project- Development of formal project scopes and capital request documentation- Producing detailed design calculations and sketches for material of constructions associated with the project.- Reviewing and checking vendor / other discipline drawings for mechanical input- Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global standards and conformance to good engineering practice- In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment- Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application and knowledge of piping supports- Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)- Recognize and communicate scope and design changes promptly- Consulting with design leaders from other disciplines to ensure smooth flow of vital information necessary for the scheduled completion of the project- Knowledge and understanding of schedule constraints and information requirements to produce all mechanical deliverables- Project Quality Assurance and Quality control direction and support- Project closureWorking hours: 8:00 AM - 5:00 PMSkills:- Strong Microstation (or similar) CAD and Excel spreadsheet skills required.- Ability to organize and maintain data file and folder structures- Ability to manage assigned tasks to meet timelines- Very detail oriented- Good Communication skillsEducation:BachelorsExperience:7-10 yearsQualifications:- B.S. or M.S. in Mechanical Engineering from an accredited university is required- Professional Engineering (PE) registration is a plus- 10+ years of relevant industrial experience in mechanical engineering- Strong project management and multitasking skills- Demonstrated creativity, innovation and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing and improving- Solid verbal and written communication and computer skills, Microsoft Suite- Proven leadership abilities and ability to influence in a non-traditional business environment- Unwavering ethics- Strong commitment to safety
      • Luling, Louisiana
      • Temp to Perm
      • $37.00 - $40.00 per hour
      • 8:00 AM - 5:00 PM
      We have an opening for a Chemical Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates.Responsibilities:? Complete process engineering design for all projects when required? Work in conjunction with area personnel and management to develop project justification ? Validate project improvements and cost savings associated with project after implementation? Mark up P&IDs as required for all projects? Modification of PFDs, material and/or energy balances? Modification of other pertinent parts of the PMF (e.g. operating procedures, JTA?s, LOTO?s)? Development of process control definition? Provide instrument process data? In conjunction with area personnel develop and execute operator training for projects? Coordinate project MOCs? Conduct/direct all project PHA?s and reviews up to and including hazard and operability (HAZOP) studies? Ensure that all aspects of a modification or project meet environmental regulations? Participate in project safety walk-throughs? In conjunction with area engineers assist in checkout, commissioning and startup of new projectsWorking hours: 8:00 AM - 5:00 PMSkills:- Ability to present and explain project detail to all levels of management.- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, andEducation:BachelorsExperience:4-7 yearsQualifications:? 3-7 years experience in a chemical manufacturing facility (Intermediate Process Engineer) ? Experience leading and executing capital projects in a chemical manufacturing facility ? Experience with Equipment Sizing Calculations and Design (Pumps, Valves, Piping, Instruments) Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have an opening for a Chemical Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates.Responsibilities:? Complete process engineering design for all projects when required? Work in conjunction with area personnel and management to develop project justification ? Validate project improvements and cost savings associated with project after implementation? Mark up P&IDs as required for all projects? Modification of PFDs, material and/or energy balances? Modification of other pertinent parts of the PMF (e.g. operating procedures, JTA?s, LOTO?s)? Development of process control definition? Provide instrument process data? In conjunction with area personnel develop and execute operator training for projects? Coordinate project MOCs? Conduct/direct all project PHA?s and reviews up to and including hazard and operability (HAZOP) studies? Ensure that all aspects of a modification or project meet environmental regulations? Participate in project safety walk-throughs? In conjunction with area engineers assist in checkout, commissioning and startup of new projectsWorking hours: 8:00 AM - 5:00 PMSkills:- Ability to present and explain project detail to all levels of management.- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, andEducation:BachelorsExperience:4-7 yearsQualifications:? 3-7 years experience in a chemical manufacturing facility (Intermediate Process Engineer) ? Experience leading and executing capital projects in a chemical manufacturing facility ? Experience with Equipment Sizing Calculations and Design (Pumps, Valves, Piping, Instruments) Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Luling, Louisiana
      • Temp to Perm
      • $35.00 - $45.00 per hour
      • 8:00 AM - 5:00 PM
      Our client is looking for an experienced Project Engineer with a focus in electrical engineering. The incumbent will report to the Site Project Engineering Manager and is responsible for overseeing and executing projects with an emphasis on electrical and instrumentation engineering activities, including: electrical equipment calculations, electrical equipment specification and design, instrumentation specification and design, work plan writing and preparation, cost estimation, equipment procurement, system startup, data management and reporting, and system troubleshooting (as required).Responsibilities:Project Management:- Manage multiple tasks to ensure projects are completed on time and on budget, with a high degree of internal and external client satisfaction.- Communicate project/task status and issues with project manager, client and/or company management.- Coordination and management of material vendors, subcontractors, and company staff- Maintain and report on a project budget and schedule to meet project expectations- Develop project estimates (budget and schedule) to secure funding- Use engineering discipline and experience to solve project issues during installation- Locate project drawings and provide initial markups to drafting for incorporation- Able to independently define the course of action and seek out the information and resources necessary to complete that courseDesign Engineering:- Oversee and prepare designs and work plans, from conceptual design through detailed design packages. Primary focus is on the electrical engineering aspect; however, expect involvement in other aspects of the design process. Electrical design tasks may include electrical load calculations, short-circuit and overcurrent protection calculations, transformer and wire/cable sizing. Other typical design aspects may include preparation of tray routing, wire routes, etc.- Develop electrical equipment and power distribution equipment specifications; prepare electrical load calculations for single and three phase loads; sketch/mark up electrical single line drawings, schematics and detail drawings as required.- Develop cable schedules, instrument indices, equipment lists, and material takeoffs; prepare requests for bids for subcontractors and material vendors. Prepare construction and equipment specifications, including means and methods. Compare bids and recommend the selection of subcontractors and material vendors.- Perform field visits on new project opportunities to determine the available site power, and utility/facility constraints, collect information regarding construction permits, evaluate potential site support contractors, and assist with preparation of cost estimates.- Lead electrical design aspects of company projects- Work with site DCS team to implement changes to the DCS as it applies to assigned projects- Understanding of and experience working with various voltage levels including: 24VDC, 120VAC, 480VAC, 2400VAC, and 15kV- Understanding of and experience working with instrumentation systems including: 4-20ma, 0-5VDC, and 0-10VDCWorking hours: 8:00 AM - 5:00 PMSkills:Skills/Aptitudes:- Self-starter and outgoing personality traits- Demonstrated leadership skills- Ability to take direction and act independently- Strong communications and organization skills- Ability to manage multiple priorities and stay organized while doing soLevel of Supervision:- Work independently based on general instructions, directions or objectivesEducation:BachelorsExperience:4-7 yearsQualifications:- BS or higher Electrical Engineering degree- Advanced training & experience in electrical power system design & distribution- At least 10 years electrical engineering experience- Prefer at least 5 years experience in c
      Our client is looking for an experienced Project Engineer with a focus in electrical engineering. The incumbent will report to the Site Project Engineering Manager and is responsible for overseeing and executing projects with an emphasis on electrical and instrumentation engineering activities, including: electrical equipment calculations, electrical equipment specification and design, instrumentation specification and design, work plan writing and preparation, cost estimation, equipment procurement, system startup, data management and reporting, and system troubleshooting (as required).Responsibilities:Project Management:- Manage multiple tasks to ensure projects are completed on time and on budget, with a high degree of internal and external client satisfaction.- Communicate project/task status and issues with project manager, client and/or company management.- Coordination and management of material vendors, subcontractors, and company staff- Maintain and report on a project budget and schedule to meet project expectations- Develop project estimates (budget and schedule) to secure funding- Use engineering discipline and experience to solve project issues during installation- Locate project drawings and provide initial markups to drafting for incorporation- Able to independently define the course of action and seek out the information and resources necessary to complete that courseDesign Engineering:- Oversee and prepare designs and work plans, from conceptual design through detailed design packages. Primary focus is on the electrical engineering aspect; however, expect involvement in other aspects of the design process. Electrical design tasks may include electrical load calculations, short-circuit and overcurrent protection calculations, transformer and wire/cable sizing. Other typical design aspects may include preparation of tray routing, wire routes, etc.- Develop electrical equipment and power distribution equipment specifications; prepare electrical load calculations for single and three phase loads; sketch/mark up electrical single line drawings, schematics and detail drawings as required.- Develop cable schedules, instrument indices, equipment lists, and material takeoffs; prepare requests for bids for subcontractors and material vendors. Prepare construction and equipment specifications, including means and methods. Compare bids and recommend the selection of subcontractors and material vendors.- Perform field visits on new project opportunities to determine the available site power, and utility/facility constraints, collect information regarding construction permits, evaluate potential site support contractors, and assist with preparation of cost estimates.- Lead electrical design aspects of company projects- Work with site DCS team to implement changes to the DCS as it applies to assigned projects- Understanding of and experience working with various voltage levels including: 24VDC, 120VAC, 480VAC, 2400VAC, and 15kV- Understanding of and experience working with instrumentation systems including: 4-20ma, 0-5VDC, and 0-10VDCWorking hours: 8:00 AM - 5:00 PMSkills:Skills/Aptitudes:- Self-starter and outgoing personality traits- Demonstrated leadership skills- Ability to take direction and act independently- Strong communications and organization skills- Ability to manage multiple priorities and stay organized while doing soLevel of Supervision:- Work independently based on general instructions, directions or objectivesEducation:BachelorsExperience:4-7 yearsQualifications:- BS or higher Electrical Engineering degree- Advanced training & experience in electrical power system design & distribution- At least 10 years electrical engineering experience- Prefer at least 5 years experience in c
      • Luling, Louisiana
      • Temp to Perm
      • $20.00 - $30.00 per hour
      • 8:00 AM - 5:00 PM
      The Accounting Specialist's primary responsibility is to assist on the site efforts to collect and provide data requested by insurance companies about claims related to Hurricane Ida damages sustained by the site. This role will collect data, track and follow up with involved parts on missing information, being the main point of contact to insurance adjusters.Schedule: This is a hybrid role where the selected candidate can work mostly from home but will need to be able to come on site for team meetings/events.Responsibilities:Scope/Specific Responsibilities??? Partner with the Site Controlling group and become a member of their team. This includes attending meetings and being an advocate for the site as it pertains to interactions with the insurance adjusters??? Collect all data requested by insurance adjusters (i.e. invoices, proof of payment, etc) from client systems??? Be the main point of contact for the insurance adjusters, gain understanding of any follow-up questions, and direct them to the proper team (i.e. Engineering, Tax, Accounts Payable, Controlling)??? Track the progress on providing information and report status to Site Controlling teamWorking hours: 8:00 AM - 5:00 PMSkills:- High school graduate with 5+ years or accounting related college graduation with 3+ years of experience in accounting, preferable - Fixed Assets and/or project accounting- Excellent communication skills and ability to interface with non-finance personnel and vendors- Excellent multitask, organization skills and attention to detail.- Excellent problem-solving skillsEducation:High SchoolExperience:1-4 yearsQualifications:- Proficiency on SAP and Excel is a must have.- MS Teams desired- State and local taxes knowledge desirable Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Accounting Specialist's primary responsibility is to assist on the site efforts to collect and provide data requested by insurance companies about claims related to Hurricane Ida damages sustained by the site. This role will collect data, track and follow up with involved parts on missing information, being the main point of contact to insurance adjusters.Schedule: This is a hybrid role where the selected candidate can work mostly from home but will need to be able to come on site for team meetings/events.Responsibilities:Scope/Specific Responsibilities??? Partner with the Site Controlling group and become a member of their team. This includes attending meetings and being an advocate for the site as it pertains to interactions with the insurance adjusters??? Collect all data requested by insurance adjusters (i.e. invoices, proof of payment, etc) from client systems??? Be the main point of contact for the insurance adjusters, gain understanding of any follow-up questions, and direct them to the proper team (i.e. Engineering, Tax, Accounts Payable, Controlling)??? Track the progress on providing information and report status to Site Controlling teamWorking hours: 8:00 AM - 5:00 PMSkills:- High school graduate with 5+ years or accounting related college graduation with 3+ years of experience in accounting, preferable - Fixed Assets and/or project accounting- Excellent communication skills and ability to interface with non-finance personnel and vendors- Excellent multitask, organization skills and attention to detail.- Excellent problem-solving skillsEducation:High SchoolExperience:1-4 yearsQualifications:- Proficiency on SAP and Excel is a must have.- MS Teams desired- State and local taxes knowledge desirable Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 78 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.