You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    26 jobs found in Owatonna, Minnesota

    Filter1
    Clear all
      • Owatonna, Minnesota
      • Temp to Perm
      • $22.58 per hour
      • 6:00 PM - 6:00 AM
      Work for an outstanding, reputable company in Owatonna, MN as a Front End Maintainer. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off)***Direct Hire Opportunity and room for growth!Total Compensation Package upon full time employment with the company:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and holidays-Comprehensive healthcare where company pays 100% of the cost for employee coverage.-401K with company match, active Pension Plan and Stock Purchase Plan-Company paid life insurance and short-term disability with optional long-term disabilityPurpose:The Front End Maintainer is responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems. This position is similar to a Machine Operator and an Industrial Maintenance Technician. Start your career today! Apply now! Urgently hiring.Responsibilities:-The Industrial Mechanic/Machine Operator will inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.-Set-up, maintenance and machine operation of the upender, unwinder, lubricator, and cupping press.-Set-up maintenance and machine operation of the body makers, trimmers, and conveying systems.-Inspect and monitor, then enter into computer the following can specifications:-flange wall thickness - mid-wall thickness - dome depth - trim can height-The machine operator will perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.-Assist in other areas as needed to maintain smooth can flow through the plant.-Complete required paperwork and documentation such as coil log, check sheets, etc.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Performs other job-related duties as required or assigned.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical aptitudeEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today! This company has great benefits and a great culture! Don't miss out on this opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for an outstanding, reputable company in Owatonna, MN as a Front End Maintainer. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off)***Direct Hire Opportunity and room for growth!Total Compensation Package upon full time employment with the company:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and holidays-Comprehensive healthcare where company pays 100% of the cost for employee coverage.-401K with company match, active Pension Plan and Stock Purchase Plan-Company paid life insurance and short-term disability with optional long-term disabilityPurpose:The Front End Maintainer is responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems. This position is similar to a Machine Operator and an Industrial Maintenance Technician. Start your career today! Apply now! Urgently hiring.Responsibilities:-The Industrial Mechanic/Machine Operator will inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.-Set-up, maintenance and machine operation of the upender, unwinder, lubricator, and cupping press.-Set-up maintenance and machine operation of the body makers, trimmers, and conveying systems.-Inspect and monitor, then enter into computer the following can specifications:-flange wall thickness - mid-wall thickness - dome depth - trim can height-The machine operator will perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.-Assist in other areas as needed to maintain smooth can flow through the plant.-Complete required paperwork and documentation such as coil log, check sheets, etc.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Performs other job-related duties as required or assigned.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical aptitudeEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today! This company has great benefits and a great culture! Don't miss out on this opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $20.00 - $26.00 per hour
      • 3:45 PM - 3:30 AM
      Responsible for supervising and coordinating activities of workers engaged in the warehouse department.Responsibilities:Supervise all employees in labeling lines, storage and shipment departments.Study production orders to assure type and quantity of labels.Observe labeling operations and inspect cans that canStart, adjust and repair labeling machinery or notify maintenance department.Prepare pack reports.Train workers in operation of equipmentBack-up for all warehouse jobs.May perform other duties as assigned by Warehouse managementMaintain an open line of communication with all employees.Responsible for setting an example for employees on safety and for monitoring and correcting unsafe acts.Supervise and maintain appropriate records for all phases of warehouse production, assuring accurate records.Adhere to all company policies and procedures.Coach and mentor subordinates and other key personnel to perform at the highest level.Openly communicate all labor situations in the warehouse to the Warehouse Manager and HR management.Working hours: 3:45 PM - 3:30 AMSkills:Knowledge:--Computer skills --Have a working knowledge of continuous improvement and/or Lean manufacturing principles.--Experience in change management--Understands and utilizes the principles of management by walking around Language Skills:--Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. --Ability to read, write in English and interpret reports, business correspondence, and procedure manuals. Mathematical Skills:--Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability:--Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. --Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand, walk, sit, use hands and fingers.Education:High SchoolExperience:1-4 yearsQualifications:--Associate degree or equivalent from two-year college or technical school or one year to two years related experience and/or equivalent combination of education and experience. -- Previous experience in a supervisory capacity would be beneficial. Direct Hire position with a reputable company! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for supervising and coordinating activities of workers engaged in the warehouse department.Responsibilities:Supervise all employees in labeling lines, storage and shipment departments.Study production orders to assure type and quantity of labels.Observe labeling operations and inspect cans that canStart, adjust and repair labeling machinery or notify maintenance department.Prepare pack reports.Train workers in operation of equipmentBack-up for all warehouse jobs.May perform other duties as assigned by Warehouse managementMaintain an open line of communication with all employees.Responsible for setting an example for employees on safety and for monitoring and correcting unsafe acts.Supervise and maintain appropriate records for all phases of warehouse production, assuring accurate records.Adhere to all company policies and procedures.Coach and mentor subordinates and other key personnel to perform at the highest level.Openly communicate all labor situations in the warehouse to the Warehouse Manager and HR management.Working hours: 3:45 PM - 3:30 AMSkills:Knowledge:--Computer skills --Have a working knowledge of continuous improvement and/or Lean manufacturing principles.--Experience in change management--Understands and utilizes the principles of management by walking around Language Skills:--Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. --Ability to read, write in English and interpret reports, business correspondence, and procedure manuals. Mathematical Skills:--Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability:--Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. --Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand, walk, sit, use hands and fingers.Education:High SchoolExperience:1-4 yearsQualifications:--Associate degree or equivalent from two-year college or technical school or one year to two years related experience and/or equivalent combination of education and experience. -- Previous experience in a supervisory capacity would be beneficial. Direct Hire position with a reputable company! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $70,000 - $90,000 per year
      • 5:00 AM - 4:00 PM
      Work for a leading manufacturer and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! This experienced Production Manager will lead and motivate a team of production team members to achieve a safe work environment and the efficient running of our operations. This role will execute upon the manufacturing plan by utilizing available resources, labor, materials, support, and capital to optimize production. In this position you would emphasize improved safety, higher quality, lower cost, and better delivery by developing improved product flow, production / inventory / capacity planning, process reliability, waste elimination, and individual / organizational development consistent with the strategic plan.Responsibilities:-Ensuring timely completion of work and advising the organization of departmental status including equipment problems, process problems, and employee performance issues-Managing labor resources to ensure that an appropriate quantity and skill level are available through selection, training, and personnel development-Supporting daily continuous process improvement and waste elimination to enhance our competitive edge through maintaining Gemba board metrics / Paretos and identifying and leading improvements in the areas of responsibility-Improving safety performance by maintaining safety system compliance and 5S realization-Leading team to comply with ISO certification requirements and guarantee quality system conformance-Driving machine reliability by ensuring the preventative maintenance system is executed and maintained-Improving inventory performance with best practices and implementing reliable inventory systems-Supporting development of annual budgets and executing plans to meet the productivity goal of the organization-Managing key projects to fulfill strategic objectives-Supporting product teams with improving products and processes to increase customer satisfaction and profitabilityWorking hours: 5:00 AM - 4:00 PMSkills:--Proven commitment to change and continuous improvement--Ability to communicate verbally and in written form--Analytical and problem-solving ability--Proven ability to motivate teams and manage conflict--Computer skills (business system, email, spreadsheet and word processing)--Experience with ERP systems and product flow--Ability to read and interpret prints, drawings, and layoutsEducation:BachelorsExperience:1-4 yearsQualifications:-Bachelor or Associate degree (bachelor???s preferred); equivalent leadership experience will be considered in lieu of degree-Three to five (3-5) years proven manufacturing experience-Three (3) years management or leadership experience-Experience in lean manufacturing environment Direct Hire position! Work for a leading manufacturer, and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! Benefit offerings include:-Paid Time Off-9 Paid Holidays-Generous Profit Sharing-Medical, Dental and Vision Insurance-Spending Accounts ??? HSA, FSA, DCFSA-Company Paid Short-term and Long-term Disability Insurance-401k Retirement Plan with Company Match-Company Paid Life Insurance-Supplemental Life Insurance-Tuition Assistance Program-Onsite Fitness Center-Employee Assistance Program-Short-term Incentive PlanSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and
      Work for a leading manufacturer and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! This experienced Production Manager will lead and motivate a team of production team members to achieve a safe work environment and the efficient running of our operations. This role will execute upon the manufacturing plan by utilizing available resources, labor, materials, support, and capital to optimize production. In this position you would emphasize improved safety, higher quality, lower cost, and better delivery by developing improved product flow, production / inventory / capacity planning, process reliability, waste elimination, and individual / organizational development consistent with the strategic plan.Responsibilities:-Ensuring timely completion of work and advising the organization of departmental status including equipment problems, process problems, and employee performance issues-Managing labor resources to ensure that an appropriate quantity and skill level are available through selection, training, and personnel development-Supporting daily continuous process improvement and waste elimination to enhance our competitive edge through maintaining Gemba board metrics / Paretos and identifying and leading improvements in the areas of responsibility-Improving safety performance by maintaining safety system compliance and 5S realization-Leading team to comply with ISO certification requirements and guarantee quality system conformance-Driving machine reliability by ensuring the preventative maintenance system is executed and maintained-Improving inventory performance with best practices and implementing reliable inventory systems-Supporting development of annual budgets and executing plans to meet the productivity goal of the organization-Managing key projects to fulfill strategic objectives-Supporting product teams with improving products and processes to increase customer satisfaction and profitabilityWorking hours: 5:00 AM - 4:00 PMSkills:--Proven commitment to change and continuous improvement--Ability to communicate verbally and in written form--Analytical and problem-solving ability--Proven ability to motivate teams and manage conflict--Computer skills (business system, email, spreadsheet and word processing)--Experience with ERP systems and product flow--Ability to read and interpret prints, drawings, and layoutsEducation:BachelorsExperience:1-4 yearsQualifications:-Bachelor or Associate degree (bachelor???s preferred); equivalent leadership experience will be considered in lieu of degree-Three to five (3-5) years proven manufacturing experience-Three (3) years management or leadership experience-Experience in lean manufacturing environment Direct Hire position! Work for a leading manufacturer, and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! Benefit offerings include:-Paid Time Off-9 Paid Holidays-Generous Profit Sharing-Medical, Dental and Vision Insurance-Spending Accounts ??? HSA, FSA, DCFSA-Company Paid Short-term and Long-term Disability Insurance-401k Retirement Plan with Company Match-Company Paid Life Insurance-Supplemental Life Insurance-Tuition Assistance Program-Onsite Fitness Center-Employee Assistance Program-Short-term Incentive PlanSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and
      • Owatonna, Minnesota
      • Temp to Perm
      • $24.00 per hour
      • 8:00 AM - 4:30 PM
      This position provides after sales support and repair services to corporate accounts and end users by addressing product repair requests and Service Repair Center inquiries while continuously supporting our commitment to customer satisfaction.Responsibilities:Provide prompt and courteous service to customers by telephone, chat, and email.Use strong communication skills to effectively listen, interpret, and respond to customer needs. Provide accurate information to customers and about repair ticket status, billing information, repair procedures, and general Service Repair questions.Make appropriate decisions regarding credits to accounts and sales order priority to ensure customer retention and satisfaction.Demonstrate a full understanding of SAP, C4C, and other online resources to respond to internal and external customer's questions and order requests.Accurately enter tickets into C4C to fulfill requests from account representatives.Maintain spreadsheets and charts relating to each national chain, OE entity, or Distributor as required by customer agreements and performance metrics.Act as a support function for other Customer Specialist team members on processes, procedures, and requirements.Work effectively with Service Repair departments to assure customer satisfaction and departmental goals are met.Continually comply with updated process methods in Customer Specialist department.Based on customer needs, make recommendations for changes to current processes in Service departments.Working hours: 8:00 AM - 4:30 PM - Hybrid Remote (In-office 2 days per week)Skills:General knowledge of repair and service processesGeneral knowledge of the products and their accessoriesEffective verbal and written communicationGeneral PC skills, including email, internet, Microsoft Word, and ExcelKeyboarding skills at 50 wpm typing and 6,000 cph data entry (Ability to accurately enter alpha numeric data)Effective Time management and problem solving skillsDetail orientated and Individual decision makingCommitment to long term customer retentionAbility to effectively communicate complex information using a professional presence in all situationsAbility to handle conflict during customer interactions while maintaining tact and customer service skills when assisting the next customerAbility to maintain a solid, credible customer relationshipAbility to function effectively independently and in a team environmentAbility to perform multiple tasks simultaneouslyEducation:AssociateExperience:4-7 yearsQualifications:Associates Degree in related field or equivalent is requiredFive years call center/office experience in customer service or direct contact with customers is requiredApply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position provides after sales support and repair services to corporate accounts and end users by addressing product repair requests and Service Repair Center inquiries while continuously supporting our commitment to customer satisfaction.Responsibilities:Provide prompt and courteous service to customers by telephone, chat, and email.Use strong communication skills to effectively listen, interpret, and respond to customer needs. Provide accurate information to customers and about repair ticket status, billing information, repair procedures, and general Service Repair questions.Make appropriate decisions regarding credits to accounts and sales order priority to ensure customer retention and satisfaction.Demonstrate a full understanding of SAP, C4C, and other online resources to respond to internal and external customer's questions and order requests.Accurately enter tickets into C4C to fulfill requests from account representatives.Maintain spreadsheets and charts relating to each national chain, OE entity, or Distributor as required by customer agreements and performance metrics.Act as a support function for other Customer Specialist team members on processes, procedures, and requirements.Work effectively with Service Repair departments to assure customer satisfaction and departmental goals are met.Continually comply with updated process methods in Customer Specialist department.Based on customer needs, make recommendations for changes to current processes in Service departments.Working hours: 8:00 AM - 4:30 PM - Hybrid Remote (In-office 2 days per week)Skills:General knowledge of repair and service processesGeneral knowledge of the products and their accessoriesEffective verbal and written communicationGeneral PC skills, including email, internet, Microsoft Word, and ExcelKeyboarding skills at 50 wpm typing and 6,000 cph data entry (Ability to accurately enter alpha numeric data)Effective Time management and problem solving skillsDetail orientated and Individual decision makingCommitment to long term customer retentionAbility to effectively communicate complex information using a professional presence in all situationsAbility to handle conflict during customer interactions while maintaining tact and customer service skills when assisting the next customerAbility to maintain a solid, credible customer relationshipAbility to function effectively independently and in a team environmentAbility to perform multiple tasks simultaneouslyEducation:AssociateExperience:4-7 yearsQualifications:Associates Degree in related field or equivalent is requiredFive years call center/office experience in customer service or direct contact with customers is requiredApply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $19.50 - $20.00 per hour
      • 6:00 AM - 6:30 PM (Various Shifts Available)
      As the Weekend Warehouse Associate, you are responsible for a variety of warehouse duties which includes helping support manufacturing area with material movement to work areas.Responsibilities:-Experience in a variety of functions, which could include receiving and storage of parts, materials and products.-Verify that materials and quantities are correct, maintain inventory, move parts and materials to proper areas.-Operate motorized and hand-powered equipment to move products.Working hours: 6:00 AM - 6:30 PM (Various Shifts Available)Skills:-Microsoft PC Outlook, Office, WMS, and SAP software experience highly preferred.-Ability to use computer terminals.-Job duties require use of arithmetic, reading, writing, and measuring equipment.-Applicants must have good interpersonal and conflict resolution skills.-Applicants must be able and willing to support different areas and functions within the warehouse as business requires.Education:No Degree RequiredExperience:1-4 yearsQualifications:-1+ year of warehouse or material handling related experience required.-Forklift, dock truck, turret truck experience preferred. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      As the Weekend Warehouse Associate, you are responsible for a variety of warehouse duties which includes helping support manufacturing area with material movement to work areas.Responsibilities:-Experience in a variety of functions, which could include receiving and storage of parts, materials and products.-Verify that materials and quantities are correct, maintain inventory, move parts and materials to proper areas.-Operate motorized and hand-powered equipment to move products.Working hours: 6:00 AM - 6:30 PM (Various Shifts Available)Skills:-Microsoft PC Outlook, Office, WMS, and SAP software experience highly preferred.-Ability to use computer terminals.-Job duties require use of arithmetic, reading, writing, and measuring equipment.-Applicants must have good interpersonal and conflict resolution skills.-Applicants must be able and willing to support different areas and functions within the warehouse as business requires.Education:No Degree RequiredExperience:1-4 yearsQualifications:-1+ year of warehouse or material handling related experience required.-Forklift, dock truck, turret truck experience preferred. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $18.00 per hour
      • 7:00 AM - 3:00 PM
      This position is accountable for the set-up, assembly and packaging of product to cost-effectively produce high-quality products on a timely basis that meets customer requirements.Responsibilities:Assemble and/or package high quality products that meet customer and design specifications while minimizing scrap/rework costs.Continually monitor methods, processes and procedures to ensure departmental goals are being met related to efficiencies, equipment utilization and time usage in order to maintain or improve cost competitiveness.Provide quality in all goods and services delivered to internal and external customers through an approach of thorough planning, responsible implementation, and continuous improvement.Follow and continually monitor established safety procedures to assure a clean, safe work environment is promoted and maintained.Maintain a positive work atmosphere by behaving and communicating in a manner that interfaces well with customers, clients, co-workers and management members.Working hours: 7:00 AM - 3:00 PMSkills:Prior assembly experience preferredAbility to operate hand tools, such as arbor presses, tape machines, and bandersAbility to work overtime including weekends, and alter hours as business needs dictateAbility to work effectively as part of a teamAbility to read and interpret blueprints.Ability to read and understand written EnglishAbility to read and interpret process routings, bills of materials, and proceduresEducation:High SchoolExperience:0-1 yearsQualifications:Basic Math skills, including percentages and the ability to count accuratelyHigh School Graduate or equivalentOn-line computing skills to record labor transactionsApply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is accountable for the set-up, assembly and packaging of product to cost-effectively produce high-quality products on a timely basis that meets customer requirements.Responsibilities:Assemble and/or package high quality products that meet customer and design specifications while minimizing scrap/rework costs.Continually monitor methods, processes and procedures to ensure departmental goals are being met related to efficiencies, equipment utilization and time usage in order to maintain or improve cost competitiveness.Provide quality in all goods and services delivered to internal and external customers through an approach of thorough planning, responsible implementation, and continuous improvement.Follow and continually monitor established safety procedures to assure a clean, safe work environment is promoted and maintained.Maintain a positive work atmosphere by behaving and communicating in a manner that interfaces well with customers, clients, co-workers and management members.Working hours: 7:00 AM - 3:00 PMSkills:Prior assembly experience preferredAbility to operate hand tools, such as arbor presses, tape machines, and bandersAbility to work overtime including weekends, and alter hours as business needs dictateAbility to work effectively as part of a teamAbility to read and interpret blueprints.Ability to read and understand written EnglishAbility to read and interpret process routings, bills of materials, and proceduresEducation:High SchoolExperience:0-1 yearsQualifications:Basic Math skills, including percentages and the ability to count accuratelyHigh School Graduate or equivalentOn-line computing skills to record labor transactionsApply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $20.07 per hour
      • 2:30 PM - 11:00 PM
      Work for a great company in Owatonna, MN! They are hiring an Entry Level Production worker on 2nd shift. This is an evaluation to hire position. Entry level! Great hours! Weekly pay!Hours: 2:30 PM - 11:00 PM, Monday-FridayPOSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. -Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:30 PM - 11:00 PMSkills:-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.-Attention to detailEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently-Stand, twist, bend and rotate continuously Apply today! Don't miss out on this great opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a great company in Owatonna, MN! They are hiring an Entry Level Production worker on 2nd shift. This is an evaluation to hire position. Entry level! Great hours! Weekly pay!Hours: 2:30 PM - 11:00 PM, Monday-FridayPOSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. -Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:30 PM - 11:00 PMSkills:-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.-Attention to detailEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently-Stand, twist, bend and rotate continuously Apply today! Don't miss out on this great opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $22.08 per hour
      • 2:00 PM - 11:00 PM
      Work for a great, reputable company in Owatonna, MN! They are the leader in can manufacturing and they just won best place to work in Southern, MN in 2022!Hours: 2:00 PM - 11:00 PM, Monday-Friday***Direct Hire Opportunity***Amazing BenefitsJOB PURPOSE:To safely ensure that all end center equipment is maintained and operating to produce finished can lids which meet all process specifications.Responsibilities:-Perform set-up and maintenance of all end center equipment, which includes: upender, unwinder, multi-die press, curler, liner, oven, bagging station and conveying.-Perform set-up and maintenance of all support systems, which include compound supply, air and vacuum systems.-Inspect, upend and load coils onto the unwinder and feed into the press. Transfer materials and finished product to and from end center as needed.-Complete required quality checks to ensure process is within specification and enter data into the computer. -Perform visual checks of finished lids to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Assist in other production areas as needed to maintain a smooth flow of cans and lids through the plant.-Maintain cleanliness of all work areas and follow all safety procedures and work practices-Performs other job-related duties as required or assignedWorking hours: 2:00 PM - 11:00 PMSkills:-Previous experience in Industrial MaintenanceEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills, including working knowledge of pneumatics and hydraulics.-Working knowledge of multi die press set-up and operation. -Thorough knowledge and understanding of quality specifications.-Basic knowledge of plumbing and electrical components.-Ability to use precision measurements devices such as calipers, micrometers, dial indicators and feeler gauges.-Ability to safely operate production forklift and maintain certification.-Knowledge of safety regulations which apply to work functions. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a great, reputable company in Owatonna, MN! They are the leader in can manufacturing and they just won best place to work in Southern, MN in 2022!Hours: 2:00 PM - 11:00 PM, Monday-Friday***Direct Hire Opportunity***Amazing BenefitsJOB PURPOSE:To safely ensure that all end center equipment is maintained and operating to produce finished can lids which meet all process specifications.Responsibilities:-Perform set-up and maintenance of all end center equipment, which includes: upender, unwinder, multi-die press, curler, liner, oven, bagging station and conveying.-Perform set-up and maintenance of all support systems, which include compound supply, air and vacuum systems.-Inspect, upend and load coils onto the unwinder and feed into the press. Transfer materials and finished product to and from end center as needed.-Complete required quality checks to ensure process is within specification and enter data into the computer. -Perform visual checks of finished lids to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Assist in other production areas as needed to maintain a smooth flow of cans and lids through the plant.-Maintain cleanliness of all work areas and follow all safety procedures and work practices-Performs other job-related duties as required or assignedWorking hours: 2:00 PM - 11:00 PMSkills:-Previous experience in Industrial MaintenanceEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills, including working knowledge of pneumatics and hydraulics.-Working knowledge of multi die press set-up and operation. -Thorough knowledge and understanding of quality specifications.-Basic knowledge of plumbing and electrical components.-Ability to use precision measurements devices such as calipers, micrometers, dial indicators and feeler gauges.-Ability to safely operate production forklift and maintain certification.-Knowledge of safety regulations which apply to work functions. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $20.05 - $23.00 per hour
      • 6:00 AM - 6:00 PM
      Repair and maintain a variety of machinery equipment located within the main plant. Demonstrate a steady, upward progression of skills and ability to do increasingly difficult tasks, the abilities will include but not be limited to the following:Responsibilities:Assist with the efficient flow of product through the assigned area and the major repair and maintenance of all machinery in the assigned area.Work with seasonal employees in their day ? to ? day dutiesHandle minor personnel problems. Refer major problems to the Supervisor / Operation MangerIn the off season, will be involved in any number of maintenance activities including machine repair/overhaul, cleaning, building walkways and work platforms, and assisting in the installation of new processing equipment.Must possess a complete set of tools for industrial maintenance.Must have general knowledge of gas and arc welding, how to cut and thread pipe, bolt and thread sizes, how to fasten pulleys and sprockets on shafts and how to adjust conveyors.Experience with hydraulics and pneumaticsAbility to read precision instruments and blue prints Ability to order parts, communicate with the suppliers and service reps from equipment companies.Maintain work area in a clean and orderly manner.May perform other duties as assigned by the SupervisorAdhere to all Company policies and proceduresNotify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Ability to fabricate equipment / ability to use basic shop mathWorking hours: 6:00 AM - 6:00 PMSkills:Knowledge:-One year related experience and / or trainingLanguage Skills:-Ability to read, write and speak EnglishReasoning Ability:-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.TEAMWORK:-Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or general education degree (GED)While performing the duties of this job, the employee is regularly required to: stand, walk, use hands and fingers to handle, feel objects, tools, or controls and reach with hands and arms.The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and / or move up to 50-75 pounds.WORK ENVIRONMENT:While performing the duties of this job, the employee occasionally works near moving mechanical parts.The noise level in the work environment is usually high. Direct Hire opportunity with a reputable company! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Repair and maintain a variety of machinery equipment located within the main plant. Demonstrate a steady, upward progression of skills and ability to do increasingly difficult tasks, the abilities will include but not be limited to the following:Responsibilities:Assist with the efficient flow of product through the assigned area and the major repair and maintenance of all machinery in the assigned area.Work with seasonal employees in their day ? to ? day dutiesHandle minor personnel problems. Refer major problems to the Supervisor / Operation MangerIn the off season, will be involved in any number of maintenance activities including machine repair/overhaul, cleaning, building walkways and work platforms, and assisting in the installation of new processing equipment.Must possess a complete set of tools for industrial maintenance.Must have general knowledge of gas and arc welding, how to cut and thread pipe, bolt and thread sizes, how to fasten pulleys and sprockets on shafts and how to adjust conveyors.Experience with hydraulics and pneumaticsAbility to read precision instruments and blue prints Ability to order parts, communicate with the suppliers and service reps from equipment companies.Maintain work area in a clean and orderly manner.May perform other duties as assigned by the SupervisorAdhere to all Company policies and proceduresNotify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Ability to fabricate equipment / ability to use basic shop mathWorking hours: 6:00 AM - 6:00 PMSkills:Knowledge:-One year related experience and / or trainingLanguage Skills:-Ability to read, write and speak EnglishReasoning Ability:-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.TEAMWORK:-Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or general education degree (GED)While performing the duties of this job, the employee is regularly required to: stand, walk, use hands and fingers to handle, feel objects, tools, or controls and reach with hands and arms.The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and / or move up to 50-75 pounds.WORK ENVIRONMENT:While performing the duties of this job, the employee occasionally works near moving mechanical parts.The noise level in the work environment is usually high. Direct Hire opportunity with a reputable company! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $70,000 - $90,000 per year
      • 8:00 AM - 5:00 PM
      Seeking an experienced sales and design person. If you love the remodel and new home design process this is a great opportunity to work for a premier cabinet company. This company works on small kitchen remodels to multi-million dollar new builds. The right candidate must be able to execute the visions and needs of clients and contractors with exacting detail.This company has been offering high-quality, custom cabinetry to clients and builders throughout the Twin Cities and southern Minnesota. Join this thriving, family-owned business as we continue to expand our sales market.Responsibilities:Bring in new leads that with proactive follow-up turn into signed contractsWork within a client or contractors budget to accurately execute their vision and needsAssist clients in choosing the cabinet style, hardware, paint/stain and many more project detailsCommunicate with coworkers in the shop to ensure accuracy and quality meet our high standardsCoordinate with interior designers that might be part of the projectWork with the client or contractors schedule for the projectProduce project drawings using Cabinet Vision to present to the clientTravel as needed for appointmentsAny other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:Ability to work remotely and come to the office as needed for client and company meetings or collaborating with coworkersGoal-oriented and self-motivatedExperienced in customer service and communication skillsHighly organizedGeneral knowledge of the Remodel and New Construction processEducation:TradeExperience:1-4 yearsQualifications:Proficient with Cabinet Vision and AutoCAD preferredKnowledge of current cabinet and interior design trendsExperience with Microsoft Office 365 Must live in the Owatonna area, as you are required to meet with customers at the office and at home when required. WORK PARTIALLY REMOTE with all Equipment and Office supplies provided, such as laptop, printer, cell phone, car allowance, and more! Base Pay PLUS impressive commission structure! Average pay per year in this position is $85,000-$95,000/yr for productive candidates! Benefits:Health Insurance- company pays 100% of employee-only premium on lowest cost planPaid Time OffHoliday Pay401k plan after 6 monthsBase salary + CommissionSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Seeking an experienced sales and design person. If you love the remodel and new home design process this is a great opportunity to work for a premier cabinet company. This company works on small kitchen remodels to multi-million dollar new builds. The right candidate must be able to execute the visions and needs of clients and contractors with exacting detail.This company has been offering high-quality, custom cabinetry to clients and builders throughout the Twin Cities and southern Minnesota. Join this thriving, family-owned business as we continue to expand our sales market.Responsibilities:Bring in new leads that with proactive follow-up turn into signed contractsWork within a client or contractors budget to accurately execute their vision and needsAssist clients in choosing the cabinet style, hardware, paint/stain and many more project detailsCommunicate with coworkers in the shop to ensure accuracy and quality meet our high standardsCoordinate with interior designers that might be part of the projectWork with the client or contractors schedule for the projectProduce project drawings using Cabinet Vision to present to the clientTravel as needed for appointmentsAny other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:Ability to work remotely and come to the office as needed for client and company meetings or collaborating with coworkersGoal-oriented and self-motivatedExperienced in customer service and communication skillsHighly organizedGeneral knowledge of the Remodel and New Construction processEducation:TradeExperience:1-4 yearsQualifications:Proficient with Cabinet Vision and AutoCAD preferredKnowledge of current cabinet and interior design trendsExperience with Microsoft Office 365 Must live in the Owatonna area, as you are required to meet with customers at the office and at home when required. WORK PARTIALLY REMOTE with all Equipment and Office supplies provided, such as laptop, printer, cell phone, car allowance, and more! Base Pay PLUS impressive commission structure! Average pay per year in this position is $85,000-$95,000/yr for productive candidates! Benefits:Health Insurance- company pays 100% of employee-only premium on lowest cost planPaid Time OffHoliday Pay401k plan after 6 monthsBase salary + CommissionSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $18.50 per hour
      • 3:30 PM - 2:00 AM (Various Shifts Available)
      Performing a variety of functions involved with shipping, receiving, and storage of parts, materials, and products.Responsibilities:-Preparing parts/materials for shipment, packing materials, verifying materials and quantities, maintaining inventory, verifying stock counts, moving parts and materials to proper areas.-Operating a variety of motorized and hand-powered material handling equipment as well as scales, postage meters, conveyor systems.-Job duties require the use of arithmetic, reading, writing, and measuring equipment.-Applicants must have good interpersonal and conflict resolution skills.-Applicants must be able and willing to support different areas and functions within the warehouse as business requires.Working hours: 3:30 PM - 2:00 AM (Various Shifts Available)Skills:-Ability to use computer terminals.-Maintains a variety of records pertaining to shipping, receiving, unloading trucks.-Performing work from printed order copies as well as various other written and verbal instructions.Education:High SchoolExperience:0-1 yearsQualifications:-A high school diploma or GED is required.-Forklift experience preferred.-Ability to use computer terminals. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Performing a variety of functions involved with shipping, receiving, and storage of parts, materials, and products.Responsibilities:-Preparing parts/materials for shipment, packing materials, verifying materials and quantities, maintaining inventory, verifying stock counts, moving parts and materials to proper areas.-Operating a variety of motorized and hand-powered material handling equipment as well as scales, postage meters, conveyor systems.-Job duties require the use of arithmetic, reading, writing, and measuring equipment.-Applicants must have good interpersonal and conflict resolution skills.-Applicants must be able and willing to support different areas and functions within the warehouse as business requires.Working hours: 3:30 PM - 2:00 AM (Various Shifts Available)Skills:-Ability to use computer terminals.-Maintains a variety of records pertaining to shipping, receiving, unloading trucks.-Performing work from printed order copies as well as various other written and verbal instructions.Education:High SchoolExperience:0-1 yearsQualifications:-A high school diploma or GED is required.-Forklift experience preferred.-Ability to use computer terminals. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $65.00 - $74.00 per hour
      • 8:00 AM - 4:30 PM
      Do you want beneficial technologies being shaped by your ideas? Whether in the areas of mobility solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the change to improve quality of life all across the globe.Responsibilities:This is project-based work expected to complete within 6-months.Working hours: 8:00 AM - 4:30 PMSkills:Deliverables:Yocto LinuxConfiguration for development boardConfiguration for new custom boardBase images for each boardSource and documentationU-BootImage for custom boardBoot configurationSource and documentationBaseline applicationInitial application framework in CIntegrated into Yocto imageSource and documentation for extendingJenkins buildAutomated build for the applicationAutomated build for final product image with applicationBuild files and documentationLinux applicationUSB and WIFI communication interfacesSupporting device drivers if necessarySource and necessary documentationEducation:No Degree RequiredExperience:1-4 yearsQualifications:Yocto LinuxC/C++CMAKELinux device drivers developmentLinux application developmentJenkins Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Do you want beneficial technologies being shaped by your ideas? Whether in the areas of mobility solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the change to improve quality of life all across the globe.Responsibilities:This is project-based work expected to complete within 6-months.Working hours: 8:00 AM - 4:30 PMSkills:Deliverables:Yocto LinuxConfiguration for development boardConfiguration for new custom boardBase images for each boardSource and documentationU-BootImage for custom boardBoot configurationSource and documentationBaseline applicationInitial application framework in CIntegrated into Yocto imageSource and documentation for extendingJenkins buildAutomated build for the applicationAutomated build for final product image with applicationBuild files and documentationLinux applicationUSB and WIFI communication interfacesSupporting device drivers if necessarySource and necessary documentationEducation:No Degree RequiredExperience:1-4 yearsQualifications:Yocto LinuxC/C++CMAKELinux device drivers developmentLinux application developmentJenkins Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $24.99 per hour
      • 6:00 PM - 6:00 AM
      Work for a company that has been voted best place to work in Southern MN in 2022! This company is looking for a night shift Preventative Maintenance & Repair Technician. Night Shift - 6:00 PM - 6:00 AM (Work 4 days on, 4 days off)*Direct Hire OpportunityTotal Compensation Package upon Full Time Employment:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and 10 holidays-FREE Employee Coverage: Health, Dental, Vision, Life Insurance-401K with company match, Funded Pension Plan and Stock Purchase Plan-Company short-term disability with optional long-term disabilityThe PMR (Preventative, Maintenance, & Repair Technician) ensures that all equipment from the front to the end area is maintained and operating to produce cans which meet quality specifications.Responsibilities:-Recognize and correct unsafe conditions, guarding, procedures, or personnel actions.-Perform daily, weekly and monthly preventative maintenance on all F.E. equipment as required.-Troubleshoot, diagnose, and repair all front end production and support equipment-Train Front End Maintainers on equipment operation and maintenance requirements.-Perform periodic machinery testing/inspection to determine alignment, wear, and operating efficiency.-Complete required documentation on machine maintenance and test results.-Assist in other areas as needed to maintain smooth can flow through the plant.-Maintain cleanliness of all work areas and machines and practice proper safetyprocedures.-Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:-Mechanically inclined-Previous maintenance work on industrial machines preferred-Previous industrial maintenance backgroundEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Able to perform complete overhauls of all Front End equipment, including the replacement, repair and alignment of cupper die set.-Thorough knowledge and understanding of manufacturing process, equipment, and quality specifications.-Ability to demonstrate mechanical aptitude on all can and end making equipment in the plant, depending on the primary area of responsibility assigned.-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a company that has been voted best place to work in Southern MN in 2022! This company is looking for a night shift Preventative Maintenance & Repair Technician. Night Shift - 6:00 PM - 6:00 AM (Work 4 days on, 4 days off)*Direct Hire OpportunityTotal Compensation Package upon Full Time Employment:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and 10 holidays-FREE Employee Coverage: Health, Dental, Vision, Life Insurance-401K with company match, Funded Pension Plan and Stock Purchase Plan-Company short-term disability with optional long-term disabilityThe PMR (Preventative, Maintenance, & Repair Technician) ensures that all equipment from the front to the end area is maintained and operating to produce cans which meet quality specifications.Responsibilities:-Recognize and correct unsafe conditions, guarding, procedures, or personnel actions.-Perform daily, weekly and monthly preventative maintenance on all F.E. equipment as required.-Troubleshoot, diagnose, and repair all front end production and support equipment-Train Front End Maintainers on equipment operation and maintenance requirements.-Perform periodic machinery testing/inspection to determine alignment, wear, and operating efficiency.-Complete required documentation on machine maintenance and test results.-Assist in other areas as needed to maintain smooth can flow through the plant.-Maintain cleanliness of all work areas and machines and practice proper safetyprocedures.-Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:-Mechanically inclined-Previous maintenance work on industrial machines preferred-Previous industrial maintenance backgroundEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Able to perform complete overhauls of all Front End equipment, including the replacement, repair and alignment of cupper die set.-Thorough knowledge and understanding of manufacturing process, equipment, and quality specifications.-Ability to demonstrate mechanical aptitude on all can and end making equipment in the plant, depending on the primary area of responsibility assigned.-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $19.57 per hour
      • 6:00 AM - 2:30 PM
      Work for a great local company in Owatonna, MN! This is an evaluation to hire position.Entry Level Production Position! Great hours! Weekly pay!Monday-Friday: 6:00 AM - 2:30 PMPOSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PMSkills:-Previous experience in a manufacturing environment-Attention to detail-Work in a fast paced environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.-Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently-Stand, twist, bend and rotate continuously Entry level position. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a great local company in Owatonna, MN! This is an evaluation to hire position.Entry Level Production Position! Great hours! Weekly pay!Monday-Friday: 6:00 AM - 2:30 PMPOSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.Responsibilities:-Operate end center packaging station and assemble finished product on pallets. -Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.-Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.-Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.-Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.-Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.-Check conditions of forklift and perform pre-operating checks as required (if assigned).-Maintain cleanliness of all work areas and follow all safety procedures and work practices.-Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PMSkills:-Previous experience in a manufacturing environment-Attention to detail-Work in a fast paced environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.-Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently-Stand, twist, bend and rotate continuously Entry level position. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $80,000 - $90,000 per year
      • 8:00 AM - 5:00 PM
      Operations ManagerWe are looking for an experienced Operations Manager to oversee our cabinet manufacturing with a focus on accuracy and meeting deadlines.This kind company has been offering high-quality, custom cabinetry to clients and builders throughout the Twin Cities and southern Minnesota for 46 years. Join this thriving, family-owned business as they continue to expand production capabilities.Responsibilities:Manage production schedule with shop SupervisorOversee production scheduleSetting and reaching production goalsForecasting using sales scheduleMaking sure final measures are completed in a timely mannerManage a team of 6-8 employeesEnsure training of new employeesHiring of subcontractors for installation/deliveryWork with AR on billings and collectionsOther duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:--We believe we accomplish more together than alone. We are looking for individuals who fit our Core Values:--Approachable and Resourceful--Driven--Work as a Team--Craftsmanship--Solution DrivenEducation:No Degree RequiredExperience:1-4 yearsQualifications:5+ years experience in Operations ManagementCarpentry experience preferredExcellent networking and relationship-building skillsTime management skillsGreat communication skills, verbal and written Direct Hire position! Day Shift, Monday thru Friday! BenefitsHealth insurance- company pays 100% of employee-only premium on lowest cost planPaid vacationPaid holidaysPaid sick leave401k and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Operations ManagerWe are looking for an experienced Operations Manager to oversee our cabinet manufacturing with a focus on accuracy and meeting deadlines.This kind company has been offering high-quality, custom cabinetry to clients and builders throughout the Twin Cities and southern Minnesota for 46 years. Join this thriving, family-owned business as they continue to expand production capabilities.Responsibilities:Manage production schedule with shop SupervisorOversee production scheduleSetting and reaching production goalsForecasting using sales scheduleMaking sure final measures are completed in a timely mannerManage a team of 6-8 employeesEnsure training of new employeesHiring of subcontractors for installation/deliveryWork with AR on billings and collectionsOther duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:--We believe we accomplish more together than alone. We are looking for individuals who fit our Core Values:--Approachable and Resourceful--Driven--Work as a Team--Craftsmanship--Solution DrivenEducation:No Degree RequiredExperience:1-4 yearsQualifications:5+ years experience in Operations ManagementCarpentry experience preferredExcellent networking and relationship-building skillsTime management skillsGreat communication skills, verbal and written Direct Hire position! Day Shift, Monday thru Friday! BenefitsHealth insurance- company pays 100% of employee-only premium on lowest cost planPaid vacationPaid holidaysPaid sick leave401k and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $16.00 per hour
      • 3:30 PM - 2:00 AM
      As a light Assembler, you will assemble and test high-quality products including, plastic components which meet customer and design engineering specifications.Responsibilities:Assure high-quality products through product testing including complex electronic devices.Perform setup operations for assembly.Safely operate tools and test equipment.Accurately report completion of production and complete required documentation.Respond to changes in the production schedule by prioritizing work to ensure customer and departmental requirements are met.Actively participate and support continuous improvement initiatives, utilizing established methodologies.Follow and continually monitor established safety procedures in order to promote a safe, clean work environment.Working hours: 3:30 PM - 2:00 AMSkills:Must have a good verbal and written understanding of the English languageBasic math skills including percentages, and ability to count accuratelyQuality oriented with ability to perform detailed, repetitive tasksStrong fine motor skillsAbility to work overtime including weekends and alter hours as necessaryEducation:High SchoolExperience:0-1 yearsQualifications:Minimum of a High School Degree or equivalent experience requiredSolder training preferred Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      As a light Assembler, you will assemble and test high-quality products including, plastic components which meet customer and design engineering specifications.Responsibilities:Assure high-quality products through product testing including complex electronic devices.Perform setup operations for assembly.Safely operate tools and test equipment.Accurately report completion of production and complete required documentation.Respond to changes in the production schedule by prioritizing work to ensure customer and departmental requirements are met.Actively participate and support continuous improvement initiatives, utilizing established methodologies.Follow and continually monitor established safety procedures in order to promote a safe, clean work environment.Working hours: 3:30 PM - 2:00 AMSkills:Must have a good verbal and written understanding of the English languageBasic math skills including percentages, and ability to count accuratelyQuality oriented with ability to perform detailed, repetitive tasksStrong fine motor skillsAbility to work overtime including weekends and alter hours as necessaryEducation:High SchoolExperience:0-1 yearsQualifications:Minimum of a High School Degree or equivalent experience requiredSolder training preferred Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $24.00 - $26.00 per hour
      • 8:00 AM - 4:30 PM
      This position is responsible for supporting automotive engineers through testing and troubleshooting prototype designs and making recommendations for continuous improvement.Responsibilities:Support vehicle content development through requirements, design, development, and QA phase.Gather information from vehicles, OE testers, and benchmark tools (reverse engineering).Access and research new information from the web as well as information related to the development of vehicle data, service instructions, and manualsIdentify and procure vehicles for analysis, development, and validation.Utilize automotive bus analyzers and diagnostic equipment to ensure the quality of productsUtilize knowledge of vehicle mechanical fundamentals in order to validate designsWorking hours: 8:00 AM - 4:30 PMSkills:Skilled in the usage of automotive test equipmentModerate knowledge and experience using PC applications such as MS Excel, MS Word, etc.Basic knowledge of databases, MS AccessPC configuration and installation skillsBasic math knowledge such as number systems, basic algebraClear and effective communication skills to work well in a team environment.Ability to follow and understand detailed test proceduresDemonstrated ability to be a self-starterDemonstrated ability to organize work and scheduleAbility to read flow charts including process maps, test plans, and flowsAbility to navigate the internet for research purposesAbility to work independently and with a teamEducation:TradeExperience:0-1 yearsQualifications:Knowledge of fundamental automotive technologiesKnowledge of basic vehicle systems including onboard controls, engine performance, transmission, ABS, and SIR modules Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is responsible for supporting automotive engineers through testing and troubleshooting prototype designs and making recommendations for continuous improvement.Responsibilities:Support vehicle content development through requirements, design, development, and QA phase.Gather information from vehicles, OE testers, and benchmark tools (reverse engineering).Access and research new information from the web as well as information related to the development of vehicle data, service instructions, and manualsIdentify and procure vehicles for analysis, development, and validation.Utilize automotive bus analyzers and diagnostic equipment to ensure the quality of productsUtilize knowledge of vehicle mechanical fundamentals in order to validate designsWorking hours: 8:00 AM - 4:30 PMSkills:Skilled in the usage of automotive test equipmentModerate knowledge and experience using PC applications such as MS Excel, MS Word, etc.Basic knowledge of databases, MS AccessPC configuration and installation skillsBasic math knowledge such as number systems, basic algebraClear and effective communication skills to work well in a team environment.Ability to follow and understand detailed test proceduresDemonstrated ability to be a self-starterDemonstrated ability to organize work and scheduleAbility to read flow charts including process maps, test plans, and flowsAbility to navigate the internet for research purposesAbility to work independently and with a teamEducation:TradeExperience:0-1 yearsQualifications:Knowledge of fundamental automotive technologiesKnowledge of basic vehicle systems including onboard controls, engine performance, transmission, ABS, and SIR modules Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.25 - $26.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      PRODUCTION TEAM MEMBERS NEEDED!$1,500 SPOT & STAY BONUSESAPPLY TODAY and be DIRECTLY HIRED for any of the following positions on 1st, 2nd, 3rd shifts available. ASSEMBLY, MACHINE OPERATOR, SHIPPING AND RECEIVING, TRUCK DRIVERS, MAINTENANCEResponsibilities:Assembly & Coating Line Operators (Parts Hangers) Forklift drivers Punch Press & Die Cast Machine Operators Maintenance Mechanics Tool & Die SHIFT DIFFERENTIALS FOR 2nd & 3rd SHIFT BENEFITS: PAID TIME OFF, HEALTH BENEFITS, EDUCATION & FITNESS REIMBURSEMENT, SAFETY GLASSES & SHOE REIMBURSEMENT.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:WILL TRAIN but previous experience in machine operation, forklift, assembly and maintenance is a Preferred.Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience preferred APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      PRODUCTION TEAM MEMBERS NEEDED!$1,500 SPOT & STAY BONUSESAPPLY TODAY and be DIRECTLY HIRED for any of the following positions on 1st, 2nd, 3rd shifts available. ASSEMBLY, MACHINE OPERATOR, SHIPPING AND RECEIVING, TRUCK DRIVERS, MAINTENANCEResponsibilities:Assembly & Coating Line Operators (Parts Hangers) Forklift drivers Punch Press & Die Cast Machine Operators Maintenance Mechanics Tool & Die SHIFT DIFFERENTIALS FOR 2nd & 3rd SHIFT BENEFITS: PAID TIME OFF, HEALTH BENEFITS, EDUCATION & FITNESS REIMBURSEMENT, SAFETY GLASSES & SHOE REIMBURSEMENT.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:WILL TRAIN but previous experience in machine operation, forklift, assembly and maintenance is a Preferred.Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience preferred APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $18.00 per hour
      • 7:00 AM - 3:30 PM
      As the Warehouse Associate, you are responsible for a variety of warehouse duties which includes helping support manufacturing area with material movement to work areas.Responsibilities:-Variety of functions, which could include receiving and storage of parts, materials and products.-Verify that materials and quantities are correct, maintain inventory, move parts and materials to proper areas.-Operate motorized and hand-powered equipment to move products.Working hours: 7:00 AM - 3:30 PMSkills:-Ability to use computer terminals.-Job duties require use of arithmetic, reading, writing, and measuring equipment.-Applicants must have good interpersonal and conflict resolution skills.-Applicants must be able and willing to support different areas and functions within the warehouse as business requires.Education:High SchoolExperience:1-4 yearsQualifications:-1+ year of warehouse or material handling related experience preferred.-Forklift, dock truck, turret truck experience preferred.-Microsoft PC Outlook, Office, WMS, and SAP software experience highly preferred. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      As the Warehouse Associate, you are responsible for a variety of warehouse duties which includes helping support manufacturing area with material movement to work areas.Responsibilities:-Variety of functions, which could include receiving and storage of parts, materials and products.-Verify that materials and quantities are correct, maintain inventory, move parts and materials to proper areas.-Operate motorized and hand-powered equipment to move products.Working hours: 7:00 AM - 3:30 PMSkills:-Ability to use computer terminals.-Job duties require use of arithmetic, reading, writing, and measuring equipment.-Applicants must have good interpersonal and conflict resolution skills.-Applicants must be able and willing to support different areas and functions within the warehouse as business requires.Education:High SchoolExperience:1-4 yearsQualifications:-1+ year of warehouse or material handling related experience preferred.-Forklift, dock truck, turret truck experience preferred.-Microsoft PC Outlook, Office, WMS, and SAP software experience highly preferred. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $21.00 per hour
      • 8:00 AM - 4:30 PM
      This position is responsible for properly creating and processing a service return order for a customer returned product, as well as the shipping of repaired product, Loaners, and Exchanges. This process is completed in accordance with quality requirements and time guidelines based on each product. All responsibilities are in support of the company's commitment to customer satisfaction.Responsibilities:-Identify the proper method for disposition of returned product-Verify customer account-Accurately create and fully process sales order -Properly generate invoice for returned product -Correctly administer inventory reductions of service parts used on product-Appropriately administer payment method for repairs completed-Receiving, shipping, and coordination of Vendor repair processes-Closing and preparation of shipments for tickets for repairs, loaners, and exchanges-Pick and ship repair products, loaner and exchange orders-Communicate within the department, with support departments and with external customers and suppliers-Ensure that products are properly serviced and/or returned to customer within time guidelines set by department supervisor-Continually comply with updated service return methodsWorking hours: 8:00 AM - 4:30 PMSkills:-Ability to accurately enter alphanumeric data.-Ability to be flexible working in multiple job locations within department.-Demonstrated ability of being a self-starter -Ability to work independently and with a teamEducation:Associate or equivalent experienceExperience:1-4 yearsQualifications:-Previous order entry experience/Customer and data management-Previous product knowledge-Knowledge of returned goods processes and procedures-Knowledge of SAP/ERP system-Forklift/PIV experience Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is responsible for properly creating and processing a service return order for a customer returned product, as well as the shipping of repaired product, Loaners, and Exchanges. This process is completed in accordance with quality requirements and time guidelines based on each product. All responsibilities are in support of the company's commitment to customer satisfaction.Responsibilities:-Identify the proper method for disposition of returned product-Verify customer account-Accurately create and fully process sales order -Properly generate invoice for returned product -Correctly administer inventory reductions of service parts used on product-Appropriately administer payment method for repairs completed-Receiving, shipping, and coordination of Vendor repair processes-Closing and preparation of shipments for tickets for repairs, loaners, and exchanges-Pick and ship repair products, loaner and exchange orders-Communicate within the department, with support departments and with external customers and suppliers-Ensure that products are properly serviced and/or returned to customer within time guidelines set by department supervisor-Continually comply with updated service return methodsWorking hours: 8:00 AM - 4:30 PMSkills:-Ability to accurately enter alphanumeric data.-Ability to be flexible working in multiple job locations within department.-Demonstrated ability of being a self-starter -Ability to work independently and with a teamEducation:Associate or equivalent experienceExperience:1-4 yearsQualifications:-Previous order entry experience/Customer and data management-Previous product knowledge-Knowledge of returned goods processes and procedures-Knowledge of SAP/ERP system-Forklift/PIV experience Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $24.99 per hour
      • 6:00 PM - 6:00 AM
      Work for a company that was voted best place to work in Southern MN in 2022! They are expanding and looking for a Shift Lead Mechanic on nights.Position Overview: Provide immediate trouble-shooting and maintenance support to all production team members and equipment as well as provide other assistance as needed.Night Shift - 6:00 PM - 6:00 AM (work 4 days on, 4 days off)TOTAL COMPENSATION PACKAGE-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and 10 holidays-FREE Employee Coverage: Health, Dental, Vision, Life Insurance-401K with company match, Funded Pension Plan and Stock Purchase Plan-Company short-term disability with optional long-term disabilityResponsibilities:-Perform the essential functions and provide technical support for the Front, Back and End Line Maintainer, depending on the area of assigned responsibilities.-Assist the team leader in the smooth operation of the facility.-Operate, trouble-shoot and perform required maintenance on all plant equipment and systems as assigned by Team Leaders and/or F.E. or B.E. Coordinators.-Complete required documentation on machine maintenance and quality checks.-Assist in other areas as needed to maintain smooth can flow through the plant.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Act as the team leader during supervisor absences to ensure that work and resources are adequately scheduled.-Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:-Previous experience as a leader-Previous work experience in Maintenance, Repair on Industrial Machines-Highly skilled MechanicEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Thorough knowledge and understanding of can and end manufacturing process, equipment, and quality specifications.-Ability to demonstrate mechanical aptitude on all can and end making equipment in the plant, depending on the primary, depending on the primary area of responsibility assigned.-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for a company that was voted best place to work in Southern MN in 2022! They are expanding and looking for a Shift Lead Mechanic on nights.Position Overview: Provide immediate trouble-shooting and maintenance support to all production team members and equipment as well as provide other assistance as needed.Night Shift - 6:00 PM - 6:00 AM (work 4 days on, 4 days off)TOTAL COMPENSATION PACKAGE-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and 10 holidays-FREE Employee Coverage: Health, Dental, Vision, Life Insurance-401K with company match, Funded Pension Plan and Stock Purchase Plan-Company short-term disability with optional long-term disabilityResponsibilities:-Perform the essential functions and provide technical support for the Front, Back and End Line Maintainer, depending on the area of assigned responsibilities.-Assist the team leader in the smooth operation of the facility.-Operate, trouble-shoot and perform required maintenance on all plant equipment and systems as assigned by Team Leaders and/or F.E. or B.E. Coordinators.-Complete required documentation on machine maintenance and quality checks.-Assist in other areas as needed to maintain smooth can flow through the plant.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Act as the team leader during supervisor absences to ensure that work and resources are adequately scheduled.-Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:-Previous experience as a leader-Previous work experience in Maintenance, Repair on Industrial Machines-Highly skilled MechanicEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).-Thorough knowledge and understanding of can and end manufacturing process, equipment, and quality specifications.-Ability to demonstrate mechanical aptitude on all can and end making equipment in the plant, depending on the primary, depending on the primary area of responsibility assigned.-Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions.-Basic knowledge of computer systems, gauges, tools and equipment.-Ability to safely operate production forklift. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $22.00 - $25.00 per hour
      • 9:00 AM - 1:00 PM
      The Administrative Assistant reports to the Executive Director and manages the efficient operation of the Owatonna Foundation office. This position provides crucial support for the operational, and development work of the Owatonna Foundation. Oversees all correspondence and record keeping regarding grant submittals, grant recipients, donor appreciation and fundraising. This position requires a strong customer service focus when interacting with the public, donors, volunteers, and board members.Responsibilities:Prepare and distribute information, stakeholder/donor correspondence, and respond to telephone and e-mail inquiries in a timely manner.Maintain organization calendar of all meetings and organization events.Assists in preparation and organizing all committee, board, and board meetings and logistics. Is responsible to attend appropriate committee meetings and recording and distribution of all meeting minutes.Maintain neat and organized office environment including the filing system, associated equipment, supplies, and fiscal contracts.Makes office purchases as necessary and within budget.General record keeping and maintenance of organizational files.Assist with maintaining social media presence. Assist with keeping website content up to date, working with professional website staff when needed. Assist with weekly updates to Board of Trustees and monthly e-newsletter if created and other electronic communications as needed.Aids in establishing office policies and procedures.Prepares checks for appropriate signatures and pays bills.Completes work in a timely manner and responds to Executive Director, Trustees, and outside inquiries within an appropriate amount of time.Office cleaning and maintenance as needed including but not limited to trash removal, recycling, mopping, vacuuming, and preparing a neat and organized meeting space.Skills:Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.Math Ability: Ability to calculate figures and amounts such as discounts, interest. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Office Suite programs/software; Excel, Word, Access, and PowerPoint. Knowledge of QuickBooks preferred.Education:BachelorsExperience:1-4 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The Administrative Assistant will be an individual who demonstrates the values of the organization, has a strong work ethic, a high-level of emotional intelligence and integrity, celebrates diversity, and works collaboratively to support the mission of the Owatonna FoundationExcellent verbal and written communicationsHighly organized with strong attention to detailProven ability to handle confidential information with discretion and highest level of customer service and responseProficiency in using Microsoft Office and computer applications for Excel spreadsheets, Word, PowerPoint presentations, database applications, etc.QuickBooks Experience is desiredAbility to prioritize and move between multiple tasksSkill in editing documents for correct grammar and punctuationWillingness to learn new things or take on new tasksSupport and contribute to an atmosphere of professionalism, responsibility, and respect.Working Hours: 20 hours per week with up to 25 as needed. This is combination of 'in-office' and 'out of office' hours.Office Hours: Mon-Fri 9:00 am to 1:00 pm Wages: $22.00 - $25.00 per hour based on experienceBenefits: 20 hours paid vacation, 20 hours PTO/Sick time, 4 hours paid time off for all major holidays if they fall within workdaysSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Administrative Assistant reports to the Executive Director and manages the efficient operation of the Owatonna Foundation office. This position provides crucial support for the operational, and development work of the Owatonna Foundation. Oversees all correspondence and record keeping regarding grant submittals, grant recipients, donor appreciation and fundraising. This position requires a strong customer service focus when interacting with the public, donors, volunteers, and board members.Responsibilities:Prepare and distribute information, stakeholder/donor correspondence, and respond to telephone and e-mail inquiries in a timely manner.Maintain organization calendar of all meetings and organization events.Assists in preparation and organizing all committee, board, and board meetings and logistics. Is responsible to attend appropriate committee meetings and recording and distribution of all meeting minutes.Maintain neat and organized office environment including the filing system, associated equipment, supplies, and fiscal contracts.Makes office purchases as necessary and within budget.General record keeping and maintenance of organizational files.Assist with maintaining social media presence. Assist with keeping website content up to date, working with professional website staff when needed. Assist with weekly updates to Board of Trustees and monthly e-newsletter if created and other electronic communications as needed.Aids in establishing office policies and procedures.Prepares checks for appropriate signatures and pays bills.Completes work in a timely manner and responds to Executive Director, Trustees, and outside inquiries within an appropriate amount of time.Office cleaning and maintenance as needed including but not limited to trash removal, recycling, mopping, vacuuming, and preparing a neat and organized meeting space.Skills:Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.Math Ability: Ability to calculate figures and amounts such as discounts, interest. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Office Suite programs/software; Excel, Word, Access, and PowerPoint. Knowledge of QuickBooks preferred.Education:BachelorsExperience:1-4 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The Administrative Assistant will be an individual who demonstrates the values of the organization, has a strong work ethic, a high-level of emotional intelligence and integrity, celebrates diversity, and works collaboratively to support the mission of the Owatonna FoundationExcellent verbal and written communicationsHighly organized with strong attention to detailProven ability to handle confidential information with discretion and highest level of customer service and responseProficiency in using Microsoft Office and computer applications for Excel spreadsheets, Word, PowerPoint presentations, database applications, etc.QuickBooks Experience is desiredAbility to prioritize and move between multiple tasksSkill in editing documents for correct grammar and punctuationWillingness to learn new things or take on new tasksSupport and contribute to an atmosphere of professionalism, responsibility, and respect.Working Hours: 20 hours per week with up to 25 as needed. This is combination of 'in-office' and 'out of office' hours.Office Hours: Mon-Fri 9:00 am to 1:00 pm Wages: $22.00 - $25.00 per hour based on experienceBenefits: 20 hours paid vacation, 20 hours PTO/Sick time, 4 hours paid time off for all major holidays if they fall within workdaysSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $50,000 - $60,000 per year
      • 7:00 AM - 5:00 PM
      We are looking for an exacting individual to develop purchasing strategies, negotiate with suppliers and maintain critical relationships. This role is crucial to the success of our growing company.This kind company has been offering high-quality, custom cabinetry to clients and builders throughout southern Minnesota and the Twin Cities for 46 years. Join this thriving, family-owned business and work with an amazing team of individuals.Responsibilities:Develop and negotiate agreements and supply contractsDevelop and manage supplier/vendor relationshipsAssessing market pricing and availability Source materials and supplies while meeting quality requirements, cost savings goals and inventory management needsAll aspects of inventory monitoring and management: tracking, receiving, restockingMaintaining an accurate inventory systemEstimating Cabinetry ProjectsOther duties as assignedWorking hours: 7:00 AM - 5:00 PMSkills:We believe we accomplish more together than alone. We are looking for individuals who fit our Core Values:Approachable and ResourcefulDrivenWork as a TeamCraftsmanshipSolution DrivenEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors degree in business, accounting, supply chain management or related field5+ years experience in purchasing roleExcellent networking and relationship-building skillsResearch and analytical capabilities Great communication skills, verbal and written Direct Hire position with a kind family owned and operated business! BenefitsHealth insurance- company pays 100% of employee-only premium on lowest cost planPaid vacationPaid holidaysPaid sick leave401kSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for an exacting individual to develop purchasing strategies, negotiate with suppliers and maintain critical relationships. This role is crucial to the success of our growing company.This kind company has been offering high-quality, custom cabinetry to clients and builders throughout southern Minnesota and the Twin Cities for 46 years. Join this thriving, family-owned business and work with an amazing team of individuals.Responsibilities:Develop and negotiate agreements and supply contractsDevelop and manage supplier/vendor relationshipsAssessing market pricing and availability Source materials and supplies while meeting quality requirements, cost savings goals and inventory management needsAll aspects of inventory monitoring and management: tracking, receiving, restockingMaintaining an accurate inventory systemEstimating Cabinetry ProjectsOther duties as assignedWorking hours: 7:00 AM - 5:00 PMSkills:We believe we accomplish more together than alone. We are looking for individuals who fit our Core Values:Approachable and ResourcefulDrivenWork as a TeamCraftsmanshipSolution DrivenEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors degree in business, accounting, supply chain management or related field5+ years experience in purchasing roleExcellent networking and relationship-building skillsResearch and analytical capabilities Great communication skills, verbal and written Direct Hire position with a kind family owned and operated business! BenefitsHealth insurance- company pays 100% of employee-only premium on lowest cost planPaid vacationPaid holidaysPaid sick leave401kSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Waseca, Minnesota
      • Temporary
      • $16.00 - $17.18 per hour
      • 8:00 AM - 5:00 PM
      We are partnered with a great company located in Waseca, MN! They are looking for a temporary Accounts Payable Clerk. ***This position is temporary and will last a couple months.Hours: 8:00 AM - 5:00 PM, Monday-FridayResponsibilities:-Processing accounts and incoming payments in compliance with financial policies and procedures-Performing day to day financial transactions, including verifying, classifying, and recording accounts payable data-Preparing bills, invoices and bank depositsWorking hours: 8:00 AM - 5:00 PMSkills:Previous experience in accounts payable preferredEducation:High SchoolExperience:1-4 yearsQualifications:-Basic computer skills-Basic accounting skills-Good at math Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are partnered with a great company located in Waseca, MN! They are looking for a temporary Accounts Payable Clerk. ***This position is temporary and will last a couple months.Hours: 8:00 AM - 5:00 PM, Monday-FridayResponsibilities:-Processing accounts and incoming payments in compliance with financial policies and procedures-Performing day to day financial transactions, including verifying, classifying, and recording accounts payable data-Preparing bills, invoices and bank depositsWorking hours: 8:00 AM - 5:00 PMSkills:Previous experience in accounts payable preferredEducation:High SchoolExperience:1-4 yearsQualifications:-Basic computer skills-Basic accounting skills-Good at math Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Permanent
      • $23.00 - $290.00 per hour
      • 5:00 PM - 6:20 AM
      Perform complex precision set-ups as required and operate various CNC Mills. Certified climate controlled precision CNC machining job shop.12hr Shifts. Work 36hrs/week and get paid for 40!Shift Options: SHIFT 1: DAYS Mon, Tues, Wed 6AM-6:20PMSHIFT 2: NIGHTS Sun, Mon, Tues 6PM-6:20AMSHIFT 3: DAYS Thurs, Fri, Sat 6AM-6:20PMSHIFT 4: NIGHTS Wed, Thurs, Fri 6PM-6:20AMResponsibilities:Perform Set-ups and operate CNC horizontal machining centers in a small lot production environment. Initiate machining processes, tool selection, and feeds & speeds on variety of materials being machined.Provide technical support to machine operators who encounter machinability problems in order to determine the best course of action to correct problem. Using: Blue Prints, CIP, routing sheets, hand tools, precision gauging and measuring tools, CNC machine tools and controls. Demonstrate skill in CNC and Macro program editing. Experience with close tolerances precision machining program. Maintain production rates according to established standards.Maintain quality standards according to inspection procedures.Recommend changes for improved quality and productivity.Maintain high awareness for safety procedures.Maintain work area in a safe, neat, and orderly manner.Perform other duties as required.Working hours: 5:00 PM - 6:20 AMSkills:1-2 years technical college in Machine tool certificate - OR - 3yrs minimum experience in a fast paced, precision, close tolerant environment. Experience working with CNC horizontal machining centers. Able to read Blue PrintsEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent.Machine trades secondary education preferred Want a 3 DAY WORK WEEK? Work 36hrs/Wk and get paid for 40?!! And in an AIR CONDITIONED-CLEAN facility?! Apply now for this Direct Hire (permanent) position at a high growth company that has a Continuous Improvement Board in place for Employee Ideas! PLUS a great Benefit Package including: Medical, Vision, Dental, ST/LT Disability, Paid Holidays, Tuition Reimbursement, Prescription Safety Glass Subsidy, 401K, Competitive Compensation, Employee Assistance Program, Shop Clothing with Name Tag ad more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform complex precision set-ups as required and operate various CNC Mills. Certified climate controlled precision CNC machining job shop.12hr Shifts. Work 36hrs/week and get paid for 40!Shift Options: SHIFT 1: DAYS Mon, Tues, Wed 6AM-6:20PMSHIFT 2: NIGHTS Sun, Mon, Tues 6PM-6:20AMSHIFT 3: DAYS Thurs, Fri, Sat 6AM-6:20PMSHIFT 4: NIGHTS Wed, Thurs, Fri 6PM-6:20AMResponsibilities:Perform Set-ups and operate CNC horizontal machining centers in a small lot production environment. Initiate machining processes, tool selection, and feeds & speeds on variety of materials being machined.Provide technical support to machine operators who encounter machinability problems in order to determine the best course of action to correct problem. Using: Blue Prints, CIP, routing sheets, hand tools, precision gauging and measuring tools, CNC machine tools and controls. Demonstrate skill in CNC and Macro program editing. Experience with close tolerances precision machining program. Maintain production rates according to established standards.Maintain quality standards according to inspection procedures.Recommend changes for improved quality and productivity.Maintain high awareness for safety procedures.Maintain work area in a safe, neat, and orderly manner.Perform other duties as required.Working hours: 5:00 PM - 6:20 AMSkills:1-2 years technical college in Machine tool certificate - OR - 3yrs minimum experience in a fast paced, precision, close tolerant environment. Experience working with CNC horizontal machining centers. Able to read Blue PrintsEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent.Machine trades secondary education preferred Want a 3 DAY WORK WEEK? Work 36hrs/Wk and get paid for 40?!! And in an AIR CONDITIONED-CLEAN facility?! Apply now for this Direct Hire (permanent) position at a high growth company that has a Continuous Improvement Board in place for Employee Ideas! PLUS a great Benefit Package including: Medical, Vision, Dental, ST/LT Disability, Paid Holidays, Tuition Reimbursement, Prescription Safety Glass Subsidy, 401K, Competitive Compensation, Employee Assistance Program, Shop Clothing with Name Tag ad more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 6:00 AM - 6:20 PM
      Perform complex precision set-ups as required and operate various CNC Mills. Certified climate controlled precision CNC machining job shop.12hr Shifts. Work 36hrs/week and get paid for 40!Shift Options: SHIFT 1: DAYS Mon, Tues, Wed 6AM-6:20PMSHIFT 2: NIGHTS Sun, Mon, Tues 6PM-6:20AMSHIFT 3: DAYS Thurs, Fri, Sat 6AM-6:20PMSHIFT 4: NIGHTS Wed, Thurs, Fri 6PM-6:20AMResponsibilities:Perform Set-ups and operate CNC horizontal machining centers in a small lot production environment. Initiate machining processes, tool selection, and feeds & speeds on variety of materials being machined.Provide technical support to machine operators who encounter machinability problems in order to determine the best course of action to correct problem. Using: Blue Prints, CIP, routing sheets, hand tools, precision gauging and measuring tools, CNC machine tools and controls. Demonstrate skill in CNC and Macro program editing. Experience with close tolerances precision machining program. Maintain production rates according to established standards.Maintain quality standards according to inspection procedures.Recommend changes for improved quality and productivity.Maintain high awareness for safety procedures.Maintain work area in a safe, neat, and orderly manner.Perform other duties as required.Working hours: 6:00 AM - 6:20 PMSkills:1-2 years technical college in Machine tool certificate ? OR ? 3yers minimum experience in a fast paced, precision, close tolerant environment. Experience working with CNC horizontal machining centers. Able to read Blue PrintsEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent.Machine trades secondary education preferred Want a 3 DAY WORK WEEK? Work 36hrs/Wk and get paid for 40?!! And in an AIR CONDITIONED-CLEAN facility?! Apply now for this Direct Hire (permanent) position at a high growth company that has a Continuous Improvement Board in place for Employee Ideas! PLUS a great Benefit Package including: Medical, Vision, Dental, ST/LT Disability, Paid Holidays, Tuition Reimbursement, Prescription Safety Glass Subsidy, 401K, Competitive Compensation, Employee Assistance Program, Shop Clothing with Name Tag ad more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform complex precision set-ups as required and operate various CNC Mills. Certified climate controlled precision CNC machining job shop.12hr Shifts. Work 36hrs/week and get paid for 40!Shift Options: SHIFT 1: DAYS Mon, Tues, Wed 6AM-6:20PMSHIFT 2: NIGHTS Sun, Mon, Tues 6PM-6:20AMSHIFT 3: DAYS Thurs, Fri, Sat 6AM-6:20PMSHIFT 4: NIGHTS Wed, Thurs, Fri 6PM-6:20AMResponsibilities:Perform Set-ups and operate CNC horizontal machining centers in a small lot production environment. Initiate machining processes, tool selection, and feeds & speeds on variety of materials being machined.Provide technical support to machine operators who encounter machinability problems in order to determine the best course of action to correct problem. Using: Blue Prints, CIP, routing sheets, hand tools, precision gauging and measuring tools, CNC machine tools and controls. Demonstrate skill in CNC and Macro program editing. Experience with close tolerances precision machining program. Maintain production rates according to established standards.Maintain quality standards according to inspection procedures.Recommend changes for improved quality and productivity.Maintain high awareness for safety procedures.Maintain work area in a safe, neat, and orderly manner.Perform other duties as required.Working hours: 6:00 AM - 6:20 PMSkills:1-2 years technical college in Machine tool certificate ? OR ? 3yers minimum experience in a fast paced, precision, close tolerant environment. Experience working with CNC horizontal machining centers. Able to read Blue PrintsEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent.Machine trades secondary education preferred Want a 3 DAY WORK WEEK? Work 36hrs/Wk and get paid for 40?!! And in an AIR CONDITIONED-CLEAN facility?! Apply now for this Direct Hire (permanent) position at a high growth company that has a Continuous Improvement Board in place for Employee Ideas! PLUS a great Benefit Package including: Medical, Vision, Dental, ST/LT Disability, Paid Holidays, Tuition Reimbursement, Prescription Safety Glass Subsidy, 401K, Competitive Compensation, Employee Assistance Program, Shop Clothing with Name Tag ad more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    Explore over 19 jobs in Owatonna

    It looks like you want to switch your language. This will reset your filters on your current job search.