You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    48 jobs found in Mankato, Minnesota

    Filter1
    Clear all
      • Mankato, Minnesota
      • Temporary
      • $16.00 - $19.00 per hour
      • 7:00 AM - 3:30 PM
      Spherion has an immediate need for assemblers! Do you have experience using hand and power tools? We can keep you busy: Spherion is seeking out assemblers with our client right here in Mankato!Responsibilities:Requires demonstrated ability to perform a variety of assembly operations involving mechanical, electrical or hydraulic components while maintaining an acceptable level of quality workmanship and meeting acceptable production rate requirements with minimal supervision. Candidate must possess good knowledge of correct and appropriate use of tools and equipment required for such assembly operationsWorking hours: 7:00 AM - 3:30 PMSkills:Must possess good knowledge of correct and appropriate use of tools and equipment required for such assembly operationsMust have skills to read and understand basic engineering drawing specifications such as blueprints, critical dimensions, and torque specificationsEducation:High SchoolExperience:0-1 yearsQualifications:Must be reasonably proficient at using a limited variety of inspection instruments including tapes, micrometers, calipers and hand-held gauges to check own work.Some examples of assembly operations could include fitting, aligning, adjusting, splicing and/or plumbing to ordinary tolerances but could involve come specific assignments dealing with few intricate parts assembled to close tolerances. Does this position interest you? Then apply, right now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has an immediate need for assemblers! Do you have experience using hand and power tools? We can keep you busy: Spherion is seeking out assemblers with our client right here in Mankato!Responsibilities:Requires demonstrated ability to perform a variety of assembly operations involving mechanical, electrical or hydraulic components while maintaining an acceptable level of quality workmanship and meeting acceptable production rate requirements with minimal supervision. Candidate must possess good knowledge of correct and appropriate use of tools and equipment required for such assembly operationsWorking hours: 7:00 AM - 3:30 PMSkills:Must possess good knowledge of correct and appropriate use of tools and equipment required for such assembly operationsMust have skills to read and understand basic engineering drawing specifications such as blueprints, critical dimensions, and torque specificationsEducation:High SchoolExperience:0-1 yearsQualifications:Must be reasonably proficient at using a limited variety of inspection instruments including tapes, micrometers, calipers and hand-held gauges to check own work.Some examples of assembly operations could include fitting, aligning, adjusting, splicing and/or plumbing to ordinary tolerances but could involve come specific assignments dealing with few intricate parts assembled to close tolerances. Does this position interest you? Then apply, right now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $17.50 - $19.50 per hour
      • 2:30 PM - 1:00 AM
      We are looking for innovative, positive, and team-oriented individuals who are willing to learn new skills and want to make an impact in a rapidly growing organization. We are a wire and cable assembly manufacturer that serves many different industries, including Power Generation, Medical, and the Recreational Vehicle market to name a few. COMPETITIVE STARTING WAGE! $17.50/hr. - $19.50/hr., depending on experience*Hiring for both FT and PT hours!FT: 40 hrs.per wk.PT: 15-20 hrs. per wk.Responsibilities:- General cable assembly.- Responsible for soldering, crimping, harnessing, and panel assembly.- Perform quality assurance checks designated for each job, function or assignment.- Ability to cross-train to fill-in on other production lines or departments, as needed.- Maintains good housekeeping and clean work areas in assigned work sites.- Ability to meet production standards on specific assignments.Working hours: 2:30 PM - 1:00 AMSkills:QUALIFICATIONS AND REQUIREMENTS- Ability to clearly understand verbal and written instructions and drawings.- Good vision and finger dexterity.- Good employment history.- Desire to be a team player.- Enjoy having fun!Education:High SchoolExperience:0-1 yearsQualifications:PREFERRED EXPERIENCE- Hand crimping- One to two years of preparing wires and components for harnessing, soldering, and distribution.- Experience/Ability to read prints- Terminal Press OperationPHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is required to frequently stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; crouch; talk or hear. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.EDUCATION- High school diploma or equivalent.Second Shift:Monday- Thursday 2:30 p.m. - 1:00 a.m.Flexible part time hours available!Monday - Thursday: 2:30 PM - 1:00 AMHiring for both FT and PT hours!FT: 40 hrs.per wk.PT: 15-20 hrs. per wk. Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits available for full time employees.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for innovative, positive, and team-oriented individuals who are willing to learn new skills and want to make an impact in a rapidly growing organization. We are a wire and cable assembly manufacturer that serves many different industries, including Power Generation, Medical, and the Recreational Vehicle market to name a few. COMPETITIVE STARTING WAGE! $17.50/hr. - $19.50/hr., depending on experience*Hiring for both FT and PT hours!FT: 40 hrs.per wk.PT: 15-20 hrs. per wk.Responsibilities:- General cable assembly.- Responsible for soldering, crimping, harnessing, and panel assembly.- Perform quality assurance checks designated for each job, function or assignment.- Ability to cross-train to fill-in on other production lines or departments, as needed.- Maintains good housekeeping and clean work areas in assigned work sites.- Ability to meet production standards on specific assignments.Working hours: 2:30 PM - 1:00 AMSkills:QUALIFICATIONS AND REQUIREMENTS- Ability to clearly understand verbal and written instructions and drawings.- Good vision and finger dexterity.- Good employment history.- Desire to be a team player.- Enjoy having fun!Education:High SchoolExperience:0-1 yearsQualifications:PREFERRED EXPERIENCE- Hand crimping- One to two years of preparing wires and components for harnessing, soldering, and distribution.- Experience/Ability to read prints- Terminal Press OperationPHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is required to frequently stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; crouch; talk or hear. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.EDUCATION- High school diploma or equivalent.Second Shift:Monday- Thursday 2:30 p.m. - 1:00 a.m.Flexible part time hours available!Monday - Thursday: 2:30 PM - 1:00 AMHiring for both FT and PT hours!FT: 40 hrs.per wk.PT: 15-20 hrs. per wk. Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits available for full time employees.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 AM - 4:30 PM
      If you are looking to put your mechanical aptitude to the test, we have the perfect opportunity for you; we are looking for assemblers who are comfortable navigating blueprints and using hand tools. This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 6AM - 4:30PM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 6:00 AM - 4:30 PMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      If you are looking to put your mechanical aptitude to the test, we have the perfect opportunity for you; we are looking for assemblers who are comfortable navigating blueprints and using hand tools. This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 6AM - 4:30PM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 6:00 AM - 4:30 PMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 - $21.00 per hour
      • 6:00 PM - 6:00 PM
      Are you a night owl? Do you know someone who is a night owl, only seeking out work when the sun goes down? We are working with a large manufacturer right here in central Mankato offering full-time positions on nights. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.2 days on, 2 days off, 3 days on, 2 days off, rotating shift - 6PM - 6AM;Responsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 PM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you a night owl? Do you know someone who is a night owl, only seeking out work when the sun goes down? We are working with a large manufacturer right here in central Mankato offering full-time positions on nights. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.2 days on, 2 days off, 3 days on, 2 days off, rotating shift - 6PM - 6AM;Responsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 PM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temporary
      • $17.50 - $18.50 per hour
      • 4:00 PM - 2:30 AM
      NEW, HIGHER PAY RATES! Calling out to all of you packagers our there, who like to start your workday juuuust a little bit later. Spherion has an immediate need for packagers on the AFTERNOON Shift shift; our client, an essential food manufacturer is in need of temporary help! The role of the Production Worker is to perform necessary functions in order to efficiently, safely, and correctly prepare and process raw material to prepare it for cooking or cut & package finished product in preparation for shipment to customer.Responsibilities:Follow daily production schedule and achieve specified goals.Ensure product conforms to specifications.Prevent and minimize rework and/or inedible.May require working on taping machines, shrink wrap machines, pallet jacks, trash and recycling compactors.Perform standard operating procedures of production and inspection functions as directed.Successfully complete all necessary technical training and skills verification as directed. Successfully complete all necessary soft skills training as directed.Return from breaks in a timely manner; notify lead/supervisor before leaving the department.Accurately complete all necessary paperwork as directed.Attend all department and company scheduled meetings.Works scheduled shift as assigned. Maintain a safe, clean and organized work area.Immediately report all accidents and deficiencies to the lead/supervisor.Ensure safety devices are installed and working properly.Suggest improvements; continuously improve the quality of all support activities.Perform all required duties within OSHA and company safety standards. Follows set company and OSHA safety rules, regulations, and guidelines at all timeWorking hours: 4:00 PM - 2:30 AMSkills:Must be able to work in a fast-paced environment.Must be able to perform repetitive functions.Must adhere to all company policies and regulatory guidelines.Must be able to accept direction from Department Leads and supervisorsMust be able to communicate with co-workers and supervisor.Must be able to work in a team oriented environment.Must be able to perform duties with minimal supervision.Excellent attendance and dependabilityAttention to detailFast-paced environmentWork well with othersGreat communication skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:The physical demands described here are representative of those that must be met by an employee to be successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DON'T WAIT! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      NEW, HIGHER PAY RATES! Calling out to all of you packagers our there, who like to start your workday juuuust a little bit later. Spherion has an immediate need for packagers on the AFTERNOON Shift shift; our client, an essential food manufacturer is in need of temporary help! The role of the Production Worker is to perform necessary functions in order to efficiently, safely, and correctly prepare and process raw material to prepare it for cooking or cut & package finished product in preparation for shipment to customer.Responsibilities:Follow daily production schedule and achieve specified goals.Ensure product conforms to specifications.Prevent and minimize rework and/or inedible.May require working on taping machines, shrink wrap machines, pallet jacks, trash and recycling compactors.Perform standard operating procedures of production and inspection functions as directed.Successfully complete all necessary technical training and skills verification as directed. Successfully complete all necessary soft skills training as directed.Return from breaks in a timely manner; notify lead/supervisor before leaving the department.Accurately complete all necessary paperwork as directed.Attend all department and company scheduled meetings.Works scheduled shift as assigned. Maintain a safe, clean and organized work area.Immediately report all accidents and deficiencies to the lead/supervisor.Ensure safety devices are installed and working properly.Suggest improvements; continuously improve the quality of all support activities.Perform all required duties within OSHA and company safety standards. Follows set company and OSHA safety rules, regulations, and guidelines at all timeWorking hours: 4:00 PM - 2:30 AMSkills:Must be able to work in a fast-paced environment.Must be able to perform repetitive functions.Must adhere to all company policies and regulatory guidelines.Must be able to accept direction from Department Leads and supervisorsMust be able to communicate with co-workers and supervisor.Must be able to work in a team oriented environment.Must be able to perform duties with minimal supervision.Excellent attendance and dependabilityAttention to detailFast-paced environmentWork well with othersGreat communication skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:The physical demands described here are representative of those that must be met by an employee to be successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DON'T WAIT! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $20.00 - $22.00 per hour
      • 6:00 AM - 2:30 PM
      To plan, organize, and control production and personnel, ensuring that product is produced efficiently, on time, and to standard.Responsibilities:?Oversee all aspects of production to ensure productivity, quality, and safety standards are being met or exceeded.?Participate in assessing staffing needs and being involved in the interview and selection process.?Responsible for employee concerns and personnel management of direct reports.?Ensure production optimization by implementing 5S, lean initiatives, and continuous improvement.?Work in partnership with all members of management to ensure successful day-to-day operations.?Ensure that all product manufacturing is performed in accordance with specifications, instructions and requirements.?Monitor production activities and adjust personnel placement and schedules for on-time delivery.?Maintain communication with human resources, customer service, and engineering to allow for consistent and successful operations.?Ensure the work policies and standards set forth in the Kato Cable Employee Handbook are followed.?Adhere to the Quality Policy, including all items assigned to this position in accordance with ISO policies, procedures, and work instructions.?Display appropriate work ethics in the workplace and group settings which provides a positive influence on consumer workers. ?Other duties as assigned.Working hours: 6:00 AM - 2:30 PMSkills:--Experience, Competencies and EducationMust possess an education or experience level that permits the employee to effectively communicate and perform duties, assignments, and responsibilities of the job. Must also have basic computer knowledge. Must be a cooperative, versatile, flexible, reliable, organized, friendly, and self-motivated professional.At least 5 years of previous management experience in a production/ manufacturing setting required.--Language SkillsAbility to read, analyze and interpret the documents relating to the job, function, or assignment. --Mathematical SkillsAbility to perform basic mathematical equations and understand company metrics.--Reasoning AbilityAbility to deal with a variety of job assignments. Must have advanced critical thinking, decision making, multi-tasking, and problem-solving skills. Ability to make decisions when identifying in-process problems.Education:BachelorsExperience:1-4 yearsQualifications:PREFERRED EXPERIENCE?Bachelor?s Degree?Proficient in MS Office, Word, Excel, PowerPoint, Outlook ACCOUNTABILITIES AND MEASURES?Ability to accomplish assigned tasks safely.?Adherence to the Quality Policy and ISO Procedural Requirements. ?Ability to maintain clean work areas and follow good housekeeping practices. ?Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs.?Ability to work effectively, courteously and respectfully with other personnel. Direct Hire position at a staple employer with Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      To plan, organize, and control production and personnel, ensuring that product is produced efficiently, on time, and to standard.Responsibilities:?Oversee all aspects of production to ensure productivity, quality, and safety standards are being met or exceeded.?Participate in assessing staffing needs and being involved in the interview and selection process.?Responsible for employee concerns and personnel management of direct reports.?Ensure production optimization by implementing 5S, lean initiatives, and continuous improvement.?Work in partnership with all members of management to ensure successful day-to-day operations.?Ensure that all product manufacturing is performed in accordance with specifications, instructions and requirements.?Monitor production activities and adjust personnel placement and schedules for on-time delivery.?Maintain communication with human resources, customer service, and engineering to allow for consistent and successful operations.?Ensure the work policies and standards set forth in the Kato Cable Employee Handbook are followed.?Adhere to the Quality Policy, including all items assigned to this position in accordance with ISO policies, procedures, and work instructions.?Display appropriate work ethics in the workplace and group settings which provides a positive influence on consumer workers. ?Other duties as assigned.Working hours: 6:00 AM - 2:30 PMSkills:--Experience, Competencies and EducationMust possess an education or experience level that permits the employee to effectively communicate and perform duties, assignments, and responsibilities of the job. Must also have basic computer knowledge. Must be a cooperative, versatile, flexible, reliable, organized, friendly, and self-motivated professional.At least 5 years of previous management experience in a production/ manufacturing setting required.--Language SkillsAbility to read, analyze and interpret the documents relating to the job, function, or assignment. --Mathematical SkillsAbility to perform basic mathematical equations and understand company metrics.--Reasoning AbilityAbility to deal with a variety of job assignments. Must have advanced critical thinking, decision making, multi-tasking, and problem-solving skills. Ability to make decisions when identifying in-process problems.Education:BachelorsExperience:1-4 yearsQualifications:PREFERRED EXPERIENCE?Bachelor?s Degree?Proficient in MS Office, Word, Excel, PowerPoint, Outlook ACCOUNTABILITIES AND MEASURES?Ability to accomplish assigned tasks safely.?Adherence to the Quality Policy and ISO Procedural Requirements. ?Ability to maintain clean work areas and follow good housekeeping practices. ?Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs.?Ability to work effectively, courteously and respectfully with other personnel. Direct Hire position at a staple employer with Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $19.00 per hour
      • 4:30 PM - 3:00 AM
      Hi, hi, you mechanical genius. You, the person comfortable working from prints, and using basic hand tools; we have the perfect opportunity for you! We are looking for assemblers who want to work right here in Mankato -- for client that just did a payrate overhaul! This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 4:30PM-3:00AM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 4:30 PM - 3:00 AMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Hi, hi, you mechanical genius. You, the person comfortable working from prints, and using basic hand tools; we have the perfect opportunity for you! We are looking for assemblers who want to work right here in Mankato -- for client that just did a payrate overhaul! This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 4:30PM-3:00AM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 4:30 PM - 3:00 AMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $14.00 per hour
      • 6:00 AM - 6:00 PM
      No experience required! We are seeking out part hangers for our client here in Mankato; these positions are offering work on the WEEKEND SHIFT; Friday-Sunday 6AM-6PM. Not only that, these roles are temp-to-hire -- so long-term opportunity. No manufacturing experience needed, just a willingness to learn!Responsibilities:Hangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metHangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metOperates electric or pneumatic hoist to set heavier painted parts on carts in advance of assemblyUses pallet jack or forklift to move parts to storage areasPerforms daily inspections of equipment within area of responsibility to insure all equipment is in safe working orderStrives to meet all established safety, quality, cost, and productivity standardsContinually seeks to improve production methods, equipment performance and overall quality of productAbility to learn a variety of different product linesWorking hours: 6:00 AM - 6:00 PMSkills:Team orientedOrganizedAbility to follow standard work and proceduresGood communication skills (verbal and written)Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience is not required! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      No experience required! We are seeking out part hangers for our client here in Mankato; these positions are offering work on the WEEKEND SHIFT; Friday-Sunday 6AM-6PM. Not only that, these roles are temp-to-hire -- so long-term opportunity. No manufacturing experience needed, just a willingness to learn!Responsibilities:Hangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metHangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metOperates electric or pneumatic hoist to set heavier painted parts on carts in advance of assemblyUses pallet jack or forklift to move parts to storage areasPerforms daily inspections of equipment within area of responsibility to insure all equipment is in safe working orderStrives to meet all established safety, quality, cost, and productivity standardsContinually seeks to improve production methods, equipment performance and overall quality of productAbility to learn a variety of different product linesWorking hours: 6:00 AM - 6:00 PMSkills:Team orientedOrganizedAbility to follow standard work and proceduresGood communication skills (verbal and written)Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience is not required! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $15.00 per hour
      • 3:30 PM - 2:00 AM
      Jobs! Jobs! Jobs! Did you know, Spherion has partned with a fabulous electronics manufacturer right here in Mankato; we are seeking out both skilled and entry-level assemblers to work on their afternoon shift. This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 3:30 PM - 2:00 AMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Jobs! Jobs! Jobs! Did you know, Spherion has partned with a fabulous electronics manufacturer right here in Mankato; we are seeking out both skilled and entry-level assemblers to work on their afternoon shift. This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 3:30 PM - 2:00 AMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $20.00 per hour
      • 4:45 PM - 3:15 AM
      This role will work with Area Leads to complete the stages to prepare and complete tasks to meetproduction timelines. They will work closely with Area Leads and Production Manager to ensuredepartment standards and schedules are met. The laser operation sets the pace for the front of the line.Responsibilities:Review and understand project specifications. Equipment operation for Saw, Plasma table, Press Brake, Iron worker/Shear. May provide support in welding and finishing in Fabrication area.Operate equipment in accordance with safety training and operational training. Inspect for final prep, load, and unload materials for projects. Will require forklift and overheadcrane operation which we will provide training for.??? Conduct training with co-workers on operational use of equipment. Including but not limited to:safety and required PPE, startup/shutdown processes, file upload, material loading/unloading,orienting material/clamping of material cutting condition, testing material cut conditions foroptimal cut, labeling of cut parts, inspection, and equipment maintenance requirements. Follow production schedule for laser processing, which can be subject to change daily due tonon-conformance components, quick ship orders, and cross value stream support. Perform quality assurance checks throughout processes.Working hours: 4:45 PM - 3:15 AMSkills:Ability to lift 25-50 pounds frequently.High level of attention to detail and accuracy.Demonstrated ability to execute on SOP, quality, and safety practices.Education:High SchoolExperience:0-1 yearsQualifications:Demonstrated ability to prioritize and manage workflow effectively to accomplish deadlines.Good communication skills.Must be a team player as they interface with multiple areas to complete tasks. Don't Wait! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This role will work with Area Leads to complete the stages to prepare and complete tasks to meetproduction timelines. They will work closely with Area Leads and Production Manager to ensuredepartment standards and schedules are met. The laser operation sets the pace for the front of the line.Responsibilities:Review and understand project specifications. Equipment operation for Saw, Plasma table, Press Brake, Iron worker/Shear. May provide support in welding and finishing in Fabrication area.Operate equipment in accordance with safety training and operational training. Inspect for final prep, load, and unload materials for projects. Will require forklift and overheadcrane operation which we will provide training for.??? Conduct training with co-workers on operational use of equipment. Including but not limited to:safety and required PPE, startup/shutdown processes, file upload, material loading/unloading,orienting material/clamping of material cutting condition, testing material cut conditions foroptimal cut, labeling of cut parts, inspection, and equipment maintenance requirements. Follow production schedule for laser processing, which can be subject to change daily due tonon-conformance components, quick ship orders, and cross value stream support. Perform quality assurance checks throughout processes.Working hours: 4:45 PM - 3:15 AMSkills:Ability to lift 25-50 pounds frequently.High level of attention to detail and accuracy.Demonstrated ability to execute on SOP, quality, and safety practices.Education:High SchoolExperience:0-1 yearsQualifications:Demonstrated ability to prioritize and manage workflow effectively to accomplish deadlines.Good communication skills.Must be a team player as they interface with multiple areas to complete tasks. Don't Wait! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $16.00 - $18.00 per hour
      • 6:00 AM - 2:30 PM
      We are looking for innovative, positive, and team-oriented individuals who are willing to learn new skills and want to make an impact in a rapidly growing organization. We are a wire and cable assembly manufacturer that serves many different industries, including Power Generation, Medical, and the Recreational Vehicle market to name a few. COMPETITIVE STARTING WAGE OF $16.00-$18/hrResponsibilities:General cable assembly. Responsible for soldering, crimping, harnessing, and panel assembly. Perform quality assurance checks designated for each job, function or assignment. Ability to cross-train to fill-in on other production lines or departments, as needed. Maintains good housekeeping and clean work areas in assigned work sites. Ability to meet production standards on specific assignments.Working hours: 6:00 AM - 2:30 PMSkills:-Ability to clearly understand verbal and written instructions and drawings. -Good vision and finger dexterity. -Good employment history. -Desire to be a team player. -Enjoy having fun!Education:High SchoolExperience:0-1 yearsQualifications:Hand crimping One to two years of preparing wires and components for harnessing, soldering, and distribution. Experience/Ability to read prints Terminal Press Operation PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is required to frequently stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; crouch; talk or hear. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. EDUCATION High school diploma or equivalent. First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.Flexible part time hours available! M-FRI: 6:00 AM - 2:30 PMFT: 40 hrs.per wk. 56001Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for innovative, positive, and team-oriented individuals who are willing to learn new skills and want to make an impact in a rapidly growing organization. We are a wire and cable assembly manufacturer that serves many different industries, including Power Generation, Medical, and the Recreational Vehicle market to name a few. COMPETITIVE STARTING WAGE OF $16.00-$18/hrResponsibilities:General cable assembly. Responsible for soldering, crimping, harnessing, and panel assembly. Perform quality assurance checks designated for each job, function or assignment. Ability to cross-train to fill-in on other production lines or departments, as needed. Maintains good housekeeping and clean work areas in assigned work sites. Ability to meet production standards on specific assignments.Working hours: 6:00 AM - 2:30 PMSkills:-Ability to clearly understand verbal and written instructions and drawings. -Good vision and finger dexterity. -Good employment history. -Desire to be a team player. -Enjoy having fun!Education:High SchoolExperience:0-1 yearsQualifications:Hand crimping One to two years of preparing wires and components for harnessing, soldering, and distribution. Experience/Ability to read prints Terminal Press Operation PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is required to frequently stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; crouch; talk or hear. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. EDUCATION High school diploma or equivalent. First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.Flexible part time hours available! M-FRI: 6:00 AM - 2:30 PMFT: 40 hrs.per wk. 56001Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $21.68 per hour
      • 10:00 PM - 6:30 AM
      GREAT PAY! INCREDIBLE BENEFITS!! APPLY TODAY !!! DIRECT HIRE PRODUCTION POSITIONS now available with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Monday - Friday, 3rd shift from 10:00 p.m. - 6:00 a.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 10:00 PM - 6:30 AMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful and be seen as credible in the workplaceEducation:High SchoolExperience:0-1 year
      GREAT PAY! INCREDIBLE BENEFITS!! APPLY TODAY !!! DIRECT HIRE PRODUCTION POSITIONS now available with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Monday - Friday, 3rd shift from 10:00 p.m. - 6:00 a.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 10:00 PM - 6:30 AMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful and be seen as credible in the workplaceEducation:High SchoolExperience:0-1 year
      • Mankato, Minnesota
      • Temporary
      • $16.25 per hour
      • 4:00 PM - 1:00 AM
      Oh, Hi, just Spherion here with another great opportunity, with a great company, with great hours, right here in Mankato. We have a client in need of assembly workers. Oh, you don't have experience with assembly? That is OKAY! This client is willing to train, bright, motivated individuals likes yourself, so have no fear!Responsibilities:Performs assembly on assigned products using machinery and/or tools as well as correct production methods to ensure accuracy and quality of finished products. Maintains production output levels consistent with set standards. May perform testing, quality inspections and reworking of deficient components and/or finished products to ensure efficient operation.Ability to read and utilize work orders in the production process. Informs management on issues related to quality, production, and/or safety which may adversely impact meeting the areas goals. Manages parts bin quantities and notifies the production supervisor or lead person when quantities are low or insufficient to maintain production.Documents actions by completing required production and quality forms.Maintains a clean and safe work area by complying with company procedures.Monitors machinery and advises maintenance of necessary repairs.Performs other duties as assigned.Working hours: 4:00 PM - 1:00 AMSkills:Good attendanceAssembly experience is a plus, but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand for 8 hours APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Oh, Hi, just Spherion here with another great opportunity, with a great company, with great hours, right here in Mankato. We have a client in need of assembly workers. Oh, you don't have experience with assembly? That is OKAY! This client is willing to train, bright, motivated individuals likes yourself, so have no fear!Responsibilities:Performs assembly on assigned products using machinery and/or tools as well as correct production methods to ensure accuracy and quality of finished products. Maintains production output levels consistent with set standards. May perform testing, quality inspections and reworking of deficient components and/or finished products to ensure efficient operation.Ability to read and utilize work orders in the production process. Informs management on issues related to quality, production, and/or safety which may adversely impact meeting the areas goals. Manages parts bin quantities and notifies the production supervisor or lead person when quantities are low or insufficient to maintain production.Documents actions by completing required production and quality forms.Maintains a clean and safe work area by complying with company procedures.Monitors machinery and advises maintenance of necessary repairs.Performs other duties as assigned.Working hours: 4:00 PM - 1:00 AMSkills:Good attendanceAssembly experience is a plus, but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand for 8 hours APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $16.50 per hour
      • 2:30 PM - 1:00 AM
      NEW PAY RATE ALERT! Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assembly.All other duties as assigned by your manager. ValuesWorking hours: 2:30 PM - 1:00 AMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      NEW PAY RATE ALERT! Spherion is looking for motivated individuals to join our team of Production team members in Mankato, MN. You will support the product manufacturing process and help to meet production goals and ensure a safe work environment. If you are a safety-oriented person with a commitment to attendance excellence, we look forward to hearing from you!The work environment is friendly and offers the opportunity for you to use the skills you have gained from your past work experience. You will also learn new skills as you do a variety of jobs you may have never done before.Responsibilities:Responsible for soldering, crimping, harnessing, panel assembly and general cable assembly.All other duties as assigned by your manager. ValuesWorking hours: 2:30 PM - 1:00 AMSkills:Use of hand toolsAbility to read and write EnglishEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 per hour
      • 4:45 PM - 3:15 AM
      Ooofda, what a GREAT opportunity! Spherion, in partnership with our client is seeking out paint preppers--is that you? If it is, we wanna talk, like right now!Shift: 2nd shift Mon-Thurs 4:30 pm - 3:00 am + OT on Friday -- $18/hourWorking as an integral part of the Paint Department team you will assist in preparing parts for liquid paint or powder coating operations as outlined by job specifications.Responsibilities:Utilize the various sanding and paint systems,Assist in maintaining clean equipment and boothsUnderstands the appropriate handling of hazardous wasteMaintain equipment in proper working order, perform routine calibrationReview and understand project specifications.Inspect for final prep, load, and unload paint and paint suppliesEnsure color and finish tolerances are met.Monitor paint and supply inventories and notify Lead of replenishment needs.Perform quality assurance checks throughout processes.Working hours: 4:45 PM - 3:15 AMSkills:- Ability to proficiently read and write English.- One year of experience in industrial or auto body painting.- Must be familiar with hazardous material handling and disposal regulations.- Ability to read, understand complex blueprints and project specifications.- Ability to maintain a high level of accuracy and attention to detail- Ability to read and execute on SOP, quality and safety processes.- Ability to work independently.- Good communication and team skills.Education:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Ability to lift 25-50 pounds frequently. Do you fit the bill? Then apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Ooofda, what a GREAT opportunity! Spherion, in partnership with our client is seeking out paint preppers--is that you? If it is, we wanna talk, like right now!Shift: 2nd shift Mon-Thurs 4:30 pm - 3:00 am + OT on Friday -- $18/hourWorking as an integral part of the Paint Department team you will assist in preparing parts for liquid paint or powder coating operations as outlined by job specifications.Responsibilities:Utilize the various sanding and paint systems,Assist in maintaining clean equipment and boothsUnderstands the appropriate handling of hazardous wasteMaintain equipment in proper working order, perform routine calibrationReview and understand project specifications.Inspect for final prep, load, and unload paint and paint suppliesEnsure color and finish tolerances are met.Monitor paint and supply inventories and notify Lead of replenishment needs.Perform quality assurance checks throughout processes.Working hours: 4:45 PM - 3:15 AMSkills:- Ability to proficiently read and write English.- One year of experience in industrial or auto body painting.- Must be familiar with hazardous material handling and disposal regulations.- Ability to read, understand complex blueprints and project specifications.- Ability to maintain a high level of accuracy and attention to detail- Ability to read and execute on SOP, quality and safety processes.- Ability to work independently.- Good communication and team skills.Education:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Ability to lift 25-50 pounds frequently. Do you fit the bill? Then apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $15.00 per hour
      • 7:00 AM - 3:30 PM
      JOBS! JOBS! JOBS! The ideal candidate for this position will need to be able to be cross-trained to perform a variety of tasks that may include: receive and sort laundry, inspect garment/coverall for all mending needs, operate equipment such as dryers and ironers, and bundling of clean garments to be re-distributed to customers.Responsibilities:Work in assigned area of production responsibility as scheduled in a safe and efficient manner.Attend departmental and branch meetings as needed to engage and complete education and training.Assist fellow production workers by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment.Consistently seek the improvement and development in assigned role/job and skills. Seek to develop multiple areas of capability in order to support the production team.Create and support a culture of adherence to branch standardization in support of, financial, service, and safety goals.Other duties as assigned by supervisor or manager.Working hours: 7:00 AM - 3:30 PMSkills:Basic Math reasoning skillsCapability to work in a fast-paced work environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:Lifting Ability; up to 25-50 pounds continuouslyAttendance is an essential function of the job Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      JOBS! JOBS! JOBS! The ideal candidate for this position will need to be able to be cross-trained to perform a variety of tasks that may include: receive and sort laundry, inspect garment/coverall for all mending needs, operate equipment such as dryers and ironers, and bundling of clean garments to be re-distributed to customers.Responsibilities:Work in assigned area of production responsibility as scheduled in a safe and efficient manner.Attend departmental and branch meetings as needed to engage and complete education and training.Assist fellow production workers by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment.Consistently seek the improvement and development in assigned role/job and skills. Seek to develop multiple areas of capability in order to support the production team.Create and support a culture of adherence to branch standardization in support of, financial, service, and safety goals.Other duties as assigned by supervisor or manager.Working hours: 7:00 AM - 3:30 PMSkills:Basic Math reasoning skillsCapability to work in a fast-paced work environmentEducation:No Degree RequiredExperience:0-1 yearsQualifications:Lifting Ability; up to 25-50 pounds continuouslyAttendance is an essential function of the job Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 - $21.00 per hour
      • 6:00 AM - 6:00 PM
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $23.00 - $24.00 per hour
      • 2:30 PM - 1:00 AM
      To plan, organize, and control production and personnel, ensuring that product is produced efficiently, on time, and to standard.Responsibilities:?Oversee all aspects of production to ensure productivity, quality, and safety standards are being met or exceeded.?Participate in assessing staffing needs and being involved in the interview and selection process.?Responsible for employee concerns and personnel management of direct reports.?Ensure production optimization by implementing 5S, lean initiatives, and continuous improvement.?Work in partnership with all members of management to ensure successful day-to-day operations.?Ensure that all product manufacturing is performed in accordance with specifications, instructions and requirements.?Monitor production activities and adjust personnel placement and schedules for on-time delivery.?Maintain communication with human resources, customer service, and engineering to allow for consistent and successful operations.?Ensure the work policies and standards set forth in the Kato Cable Employee Handbook are followed.?Adhere to the Quality Policy, including all items assigned to this position in accordance with ISO policies, procedures, and work instructions.?Display appropriate work ethics in the workplace and group settings which provides a positive influence on consumer workers. ?Other duties as assigned.Working hours: 2:30 PM - 1:00 AMSkills:ACCOUNTABILITIES AND MEASURES--Ability to accomplish assigned tasks safely.--Adherence to the Quality Policy and ISO Procedural Requirements. --Ability to maintain clean work areas and follow good housekeeping practices. --Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs.--Ability to work effectively, courteously and respectfully with other personnel.WORK ENVIRONMENTWork environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is not normally exposed to weather conditions. The noise level in the work environment is typically low to moderate.Education:BachelorsExperience:1-4 yearsQualifications:?Experience, Competencies and EducationMust possess an education or experience level that permits the employee to effectively communicate and perform duties, assignments, and responsibilities of the job. Must also have basic computer knowledge. Must be a cooperative, versatile, flexible, reliable, organized, friendly, and self-motivated professional.At least 5 years of previous management experience in a production/ manufacturing setting required.?Language SkillsAbility to read, analyze and interpret the documents relating to the job, function, or assignment. ?Mathematical SkillsAbility to perform basic mathematical equations and understand company metrics.?Reasoning AbilityAbility to deal with a variety of job assignments. Must have advanced critical thinking, decision making, multi-tasking, and problem-solving skills. Ability to make decisions when identifying in-process problems.PREFERRED EXPERIENCE?Bachelor?s Degree?Proficient in MS Office, Word, Excel, PowerPoint, Outlook2nd Shift: Mon-Thurs: 2:30 PM - 1:00 AM*First 8 weeks on1st shift, for training Direct Hire position at a staple employer with Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer
      To plan, organize, and control production and personnel, ensuring that product is produced efficiently, on time, and to standard.Responsibilities:?Oversee all aspects of production to ensure productivity, quality, and safety standards are being met or exceeded.?Participate in assessing staffing needs and being involved in the interview and selection process.?Responsible for employee concerns and personnel management of direct reports.?Ensure production optimization by implementing 5S, lean initiatives, and continuous improvement.?Work in partnership with all members of management to ensure successful day-to-day operations.?Ensure that all product manufacturing is performed in accordance with specifications, instructions and requirements.?Monitor production activities and adjust personnel placement and schedules for on-time delivery.?Maintain communication with human resources, customer service, and engineering to allow for consistent and successful operations.?Ensure the work policies and standards set forth in the Kato Cable Employee Handbook are followed.?Adhere to the Quality Policy, including all items assigned to this position in accordance with ISO policies, procedures, and work instructions.?Display appropriate work ethics in the workplace and group settings which provides a positive influence on consumer workers. ?Other duties as assigned.Working hours: 2:30 PM - 1:00 AMSkills:ACCOUNTABILITIES AND MEASURES--Ability to accomplish assigned tasks safely.--Adherence to the Quality Policy and ISO Procedural Requirements. --Ability to maintain clean work areas and follow good housekeeping practices. --Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs.--Ability to work effectively, courteously and respectfully with other personnel.WORK ENVIRONMENTWork environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is not normally exposed to weather conditions. The noise level in the work environment is typically low to moderate.Education:BachelorsExperience:1-4 yearsQualifications:?Experience, Competencies and EducationMust possess an education or experience level that permits the employee to effectively communicate and perform duties, assignments, and responsibilities of the job. Must also have basic computer knowledge. Must be a cooperative, versatile, flexible, reliable, organized, friendly, and self-motivated professional.At least 5 years of previous management experience in a production/ manufacturing setting required.?Language SkillsAbility to read, analyze and interpret the documents relating to the job, function, or assignment. ?Mathematical SkillsAbility to perform basic mathematical equations and understand company metrics.?Reasoning AbilityAbility to deal with a variety of job assignments. Must have advanced critical thinking, decision making, multi-tasking, and problem-solving skills. Ability to make decisions when identifying in-process problems.PREFERRED EXPERIENCE?Bachelor?s Degree?Proficient in MS Office, Word, Excel, PowerPoint, Outlook2nd Shift: Mon-Thurs: 2:30 PM - 1:00 AM*First 8 weeks on1st shift, for training Direct Hire position at a staple employer with Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer
      • Mankato, Minnesota
      • Permanent
      • $21.68 per hour
      • 2:00 PM - 10:00 PM
      Do you love Direct Hire Opportunities that offer great pay and benefits? Don't miss out on this one and APPLY TODAY for this rare opportunity with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Monday - Friday, 2nd shift from 2:00 p.m. - 10:00 p.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 2:00 PM - 10:00 PMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful and be seen as credible in the workplaceEducation
      Do you love Direct Hire Opportunities that offer great pay and benefits? Don't miss out on this one and APPLY TODAY for this rare opportunity with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Monday - Friday, 2nd shift from 2:00 p.m. - 10:00 p.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 2:00 PM - 10:00 PMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful and be seen as credible in the workplaceEducation
      • Mankato, Minnesota
      • Temporary
      • $16.75 - $17.75 per hour
      • 6:00 AM - 4:00 PM
      We are talking about a $3 an hour pay rate increase here! That is AWESOME!! Looking for you early birdies who like to work 4 ten hour shifts and start the weekend early--I see you! Spherion has an immediate need for packagers on the AM Shift shift; our client, an essential food manufacturer is in need of temporary help! The role of the Production Worker is to perform necessary functions in order to efficiently, safely, and correctly prepare and process raw material to prepare it for cooking or cut & package finished product in preparation for shipment to customer.Responsibilities:Follow daily production schedule and achieve specified goals.Ensure product conforms to specifications.Prevent and minimize rework and/or inedible.May require working on taping machines, shrink wrap machines, pallet jacks, trash and recycling compactors.Perform standard operating procedures of production and inspection functions as directed.Successfully complete all necessary technical training and skills verification as directed. Successfully complete all necessary soft skills training as directed.Return from breaks in a timely manner; notify lead/supervisor before leaving the department.Accurately complete all necessary paperwork as directed.Attend all department and company scheduled meetings.Works scheduled shift as assigned. Maintain a safe, clean and organized work area.Immediately report all accidents and deficiencies to the lead/supervisor.Ensure safety devices are installed and working properly.Suggest improvements; continuously improve the quality of all support activities.Perform all required duties within OSHA and company safety standards. Follows set company and OSHA safety rules, regulations, and guidelines at all timeWorking hours: 6:00 AM - 4:00 PMSkills:Must be able to work in a fast-paced environment.Must be able to perform repetitive functions.Must adhere to all company policies and regulatory guidelines.Must be able to accept direction from Department Leads and supervisorsMust be able to communicate with co-workers and supervisor.Must be able to work in a team oriented environment.Must be able to perform duties with minimal supervision.Excellent attendance and dependabilityAttention to detailFast-paced environmentWork well with othersGreat communication skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:The physical demands described here are representative of those that must be met by an employee to be successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DON'T WAIT! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are talking about a $3 an hour pay rate increase here! That is AWESOME!! Looking for you early birdies who like to work 4 ten hour shifts and start the weekend early--I see you! Spherion has an immediate need for packagers on the AM Shift shift; our client, an essential food manufacturer is in need of temporary help! The role of the Production Worker is to perform necessary functions in order to efficiently, safely, and correctly prepare and process raw material to prepare it for cooking or cut & package finished product in preparation for shipment to customer.Responsibilities:Follow daily production schedule and achieve specified goals.Ensure product conforms to specifications.Prevent and minimize rework and/or inedible.May require working on taping machines, shrink wrap machines, pallet jacks, trash and recycling compactors.Perform standard operating procedures of production and inspection functions as directed.Successfully complete all necessary technical training and skills verification as directed. Successfully complete all necessary soft skills training as directed.Return from breaks in a timely manner; notify lead/supervisor before leaving the department.Accurately complete all necessary paperwork as directed.Attend all department and company scheduled meetings.Works scheduled shift as assigned. Maintain a safe, clean and organized work area.Immediately report all accidents and deficiencies to the lead/supervisor.Ensure safety devices are installed and working properly.Suggest improvements; continuously improve the quality of all support activities.Perform all required duties within OSHA and company safety standards. Follows set company and OSHA safety rules, regulations, and guidelines at all timeWorking hours: 6:00 AM - 4:00 PMSkills:Must be able to work in a fast-paced environment.Must be able to perform repetitive functions.Must adhere to all company policies and regulatory guidelines.Must be able to accept direction from Department Leads and supervisorsMust be able to communicate with co-workers and supervisor.Must be able to work in a team oriented environment.Must be able to perform duties with minimal supervision.Excellent attendance and dependabilityAttention to detailFast-paced environmentWork well with othersGreat communication skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:The physical demands described here are representative of those that must be met by an employee to be successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DON'T WAIT! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temporary
      • $18.25 - $19.25 per hour
      • 6:00 AM - 6:30 PM
      CALLING ALL WEEKEND WARRIORS! Spherion has an immediate need for packagers on the weekend shift; our client, an essential food manufacturer is in need of temporary help! The role of the Production Worker is to perform necessary functions in order to efficiently, safely, and correctly prepare and process raw material to prepare it for cooking or cut & package finished product in preparation for shipment to customer.Responsibilities:Follow daily production schedule and achieve specified goals.Ensure product conforms to specifications.Prevent and minimize rework and/or inedible.May require working on taping machines, shrink wrap machines, pallet jacks, trash and recycling compactors.Perform standard operating procedures of production and inspection functions as directed.Successfully complete all necessary technical training and skills verification as directed. Successfully complete all necessary soft skills training as directed.Return from breaks in a timely manner; notify lead/supervisor before leaving the department.Accurately complete all necessary paperwork as directed.Attend all department and company scheduled meetings.Works scheduled shift as assigned. Maintain a safe, clean and organized work area.Immediately report all accidents and deficiencies to the lead/supervisor.Ensure safety devices are installed and working properly.Suggest improvements; continuously improve the quality of all support activities.Perform all required duties within OSHA and company safety standards. Follows set company and OSHA safety rules, regulations, and guidelines at all timeWorking hours: 6:00 AM - 6:30 PMSkills:Must be able to work in a fast-paced environment.Must be able to perform repetitive functions.Must adhere to all company policies and regulatory guidelines.Must be able to accept direction from Department Leads and supervisorsMust be able to communicate with co-workers and supervisor.Must be able to work in a team oriented environment.Must be able to perform duties with minimal supervision.Excellent attendance and dependabilityAttention to detailFast-paced environmentWork well with othersGreat communication skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:The physical demands described here are representative of those that must be met by an employee to be successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DON'T WAIT! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      CALLING ALL WEEKEND WARRIORS! Spherion has an immediate need for packagers on the weekend shift; our client, an essential food manufacturer is in need of temporary help! The role of the Production Worker is to perform necessary functions in order to efficiently, safely, and correctly prepare and process raw material to prepare it for cooking or cut & package finished product in preparation for shipment to customer.Responsibilities:Follow daily production schedule and achieve specified goals.Ensure product conforms to specifications.Prevent and minimize rework and/or inedible.May require working on taping machines, shrink wrap machines, pallet jacks, trash and recycling compactors.Perform standard operating procedures of production and inspection functions as directed.Successfully complete all necessary technical training and skills verification as directed. Successfully complete all necessary soft skills training as directed.Return from breaks in a timely manner; notify lead/supervisor before leaving the department.Accurately complete all necessary paperwork as directed.Attend all department and company scheduled meetings.Works scheduled shift as assigned. Maintain a safe, clean and organized work area.Immediately report all accidents and deficiencies to the lead/supervisor.Ensure safety devices are installed and working properly.Suggest improvements; continuously improve the quality of all support activities.Perform all required duties within OSHA and company safety standards. Follows set company and OSHA safety rules, regulations, and guidelines at all timeWorking hours: 6:00 AM - 6:30 PMSkills:Must be able to work in a fast-paced environment.Must be able to perform repetitive functions.Must adhere to all company policies and regulatory guidelines.Must be able to accept direction from Department Leads and supervisorsMust be able to communicate with co-workers and supervisor.Must be able to work in a team oriented environment.Must be able to perform duties with minimal supervision.Excellent attendance and dependabilityAttention to detailFast-paced environmentWork well with othersGreat communication skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:The physical demands described here are representative of those that must be met by an employee to be successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DON'T WAIT! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $16.00 - $18.00 per hour
      • 6:00 AM - 2:30 PM
      We are looking for innovative, positive, and team-oriented individuals who are willing to learn new skills and want to make an impact in a rapidly growing organization. We are a wire and cable assembly manufacturer that serves many different industries, including Power Generation, Medical, and the Recreational Vehicle market to name a few. COMPETITIVE STARTING WAGE OF $16.00-$18/hrResponsibilities:???General cable assembly. ???Responsible for soldering, crimping, harnessing, and panel assembly. ???Perform quality assurance checks designated for each job, function or assignment. ???Ability to cross-train to fill-in on other production lines or departments, as needed. ???Maintains good housekeeping and clean work areas in assigned work sites. ???Ability to meet production standards on specific assignments.Working hours: 6:00 AM - 2:30 PMSkills:--Ability to clearly understand verbal and written instructions and drawings. --Good vision and finger dexterity. --Good employment history. --Desire to be a team player. --Enjoy having fun!Education:High SchoolExperience:0-1 yearsQualifications:PREFERRED EXPERIENCE ???Hand crimping ???One to two years of preparing wires and components for harnessing, soldering, and distribution. ???Experience/Ability to read prints ???Terminal Press Operation PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is required to frequently stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; crouch; talk or hear. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. EDUCATION ???High school diploma or equivalent. First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.Flexible part time hours available! Hiring for both FT and PT hours!M-FRI: 6:00 AM - 2:30 PMFT: 40 hrs.per wk.PT: 15-20 hrs. per wk. Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits available for full time employees.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for innovative, positive, and team-oriented individuals who are willing to learn new skills and want to make an impact in a rapidly growing organization. We are a wire and cable assembly manufacturer that serves many different industries, including Power Generation, Medical, and the Recreational Vehicle market to name a few. COMPETITIVE STARTING WAGE OF $16.00-$18/hrResponsibilities:???General cable assembly. ???Responsible for soldering, crimping, harnessing, and panel assembly. ???Perform quality assurance checks designated for each job, function or assignment. ???Ability to cross-train to fill-in on other production lines or departments, as needed. ???Maintains good housekeeping and clean work areas in assigned work sites. ???Ability to meet production standards on specific assignments.Working hours: 6:00 AM - 2:30 PMSkills:--Ability to clearly understand verbal and written instructions and drawings. --Good vision and finger dexterity. --Good employment history. --Desire to be a team player. --Enjoy having fun!Education:High SchoolExperience:0-1 yearsQualifications:PREFERRED EXPERIENCE ???Hand crimping ???One to two years of preparing wires and components for harnessing, soldering, and distribution. ???Experience/Ability to read prints ???Terminal Press Operation PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is required to frequently stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; crouch; talk or hear. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. EDUCATION ???High school diploma or equivalent. First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.Flexible part time hours available! Hiring for both FT and PT hours!M-FRI: 6:00 AM - 2:30 PMFT: 40 hrs.per wk.PT: 15-20 hrs. per wk. Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits available for full time employees.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $17.20 - $21.00 per hour
      • 1:00 PM - 1:00 AM
      Spherion has a great DIRECT HIRE opportunity for a Weekend HOURS Maintenance Technician. (Friday-Sunday 1pm-1:30am)The ideal candidate will take initiative, solve problems, and make decisions. We are seeking a Maintenance Technician to make sure our equipment is running smoothly Friday, Saturday and Sunday. This is a unique work schedule that could be perfect for someone who has other obligations/interests during the standard work week! In this role, you will keep the plant and equipment running in a safe and efficient manner and maintain/repair building and equipment in accordance with established company policies and procedures.Responsibilities:Manage start-up to make sure equipment is in proper operating condition.Demand Maintenance as assigned: Skill in diagnosing equipment defects and making necessary repairs.Maintain, repair and troubleshoot machinery, ovens, mechanical lift trucks, and facilities problems as needed for production issues and efficiency.Safety operate various machines, including a Band Saw, Break Press, Mill, Lathe, Grinder, etc.Inspect machines and equipment for conformance with operational standards.Maintain all areas of the shop, boiler room, and the interior/exterior of the plant.Troubleshoot electrical functions (i.e. motors, controls, PLC function, and other basic wiring)Confers with management and suppliers to resolve maintenance problems and recommends measures to improve operations and conditions of machines and equipmentComplete Preventative Maintenance tasks as assigned.Assist with inventory control of tools and parts on hand.Work with tools and power equipment as well as material handling.Operate mechanical forklift, pallet jack, battery-changer and stock picker. Follow Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) training, along with company pre-requisite programs, Standard Operating Procedures (SOPs), and Standard Sanitation Operating Procedures (SSOPs).Performs other duties and responsibilities as necessary.Working hours: 1:00 PM - 1:00 AMSkills:Ability to read and interpret documents such as safety rules, operating and/or maintenance instructions and procedure manuals.Ability to write routine breakdown, preventive maintenance and other maintenance related reports and correspondence.Intermediate verbal communication skills in English.Ability to add and subtract, multiply, and divide using whole numbers, common fractions, and decimals.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades (i.e. welding, tap measure, band saw, lathe, caliper, micrometer, etc.).Self-motivated, able to work unsupervised and with teamsProject orientedMulti-tasking abilityAttention to detailAbility to work in a fast-paced environmentWork well with othersExcellent verbal and written communication skills; must work effectively with all levels of management and team membersEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED1-5 years of related experience and/or training or equivalent combination of education and experiencePreferred: Basic knowledge of manufacturing.Facility maintenance experience preferredIndustrial mechanical experience.Knowledge of hydraulics, pneumatics and electronicsKnowledge of electrical/mechanical safety practicesPrior Knowledge of food processing equipment helpful. Electrical and electrical troubleshooting of 120/240/480 3ph sy
      Spherion has a great DIRECT HIRE opportunity for a Weekend HOURS Maintenance Technician. (Friday-Sunday 1pm-1:30am)The ideal candidate will take initiative, solve problems, and make decisions. We are seeking a Maintenance Technician to make sure our equipment is running smoothly Friday, Saturday and Sunday. This is a unique work schedule that could be perfect for someone who has other obligations/interests during the standard work week! In this role, you will keep the plant and equipment running in a safe and efficient manner and maintain/repair building and equipment in accordance with established company policies and procedures.Responsibilities:Manage start-up to make sure equipment is in proper operating condition.Demand Maintenance as assigned: Skill in diagnosing equipment defects and making necessary repairs.Maintain, repair and troubleshoot machinery, ovens, mechanical lift trucks, and facilities problems as needed for production issues and efficiency.Safety operate various machines, including a Band Saw, Break Press, Mill, Lathe, Grinder, etc.Inspect machines and equipment for conformance with operational standards.Maintain all areas of the shop, boiler room, and the interior/exterior of the plant.Troubleshoot electrical functions (i.e. motors, controls, PLC function, and other basic wiring)Confers with management and suppliers to resolve maintenance problems and recommends measures to improve operations and conditions of machines and equipmentComplete Preventative Maintenance tasks as assigned.Assist with inventory control of tools and parts on hand.Work with tools and power equipment as well as material handling.Operate mechanical forklift, pallet jack, battery-changer and stock picker. Follow Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) training, along with company pre-requisite programs, Standard Operating Procedures (SOPs), and Standard Sanitation Operating Procedures (SSOPs).Performs other duties and responsibilities as necessary.Working hours: 1:00 PM - 1:00 AMSkills:Ability to read and interpret documents such as safety rules, operating and/or maintenance instructions and procedure manuals.Ability to write routine breakdown, preventive maintenance and other maintenance related reports and correspondence.Intermediate verbal communication skills in English.Ability to add and subtract, multiply, and divide using whole numbers, common fractions, and decimals.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades (i.e. welding, tap measure, band saw, lathe, caliper, micrometer, etc.).Self-motivated, able to work unsupervised and with teamsProject orientedMulti-tasking abilityAttention to detailAbility to work in a fast-paced environmentWork well with othersExcellent verbal and written communication skills; must work effectively with all levels of management and team membersEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED1-5 years of related experience and/or training or equivalent combination of education and experiencePreferred: Basic knowledge of manufacturing.Facility maintenance experience preferredIndustrial mechanical experience.Knowledge of hydraulics, pneumatics and electronicsKnowledge of electrical/mechanical safety practicesPrior Knowledge of food processing equipment helpful. Electrical and electrical troubleshooting of 120/240/480 3ph sy
      • Mankato, Minnesota
      • Temporary
      • $14.25 per hour
      • 7:00 AM - 3:30 PM
      Oh, Hi, just Spherion here with another great opportunity, with a great company, with great hours, right here in Mankato. We have a client in need of assembly workers. Oh, you don't have experience with assembly? That is OKAY! This client is willing to train, bright, motivated individuals likes yourself, so have no fear!This is a 1st shift position; Monday - Friday 7:00AM-3:30PMResponsibilities:Performs assembly on assigned products using machinery and/or tools as well as correct production methods to ensure accuracy and quality of finished products. Maintains production output levels consistent with set standards. May perform testing, quality inspections and reworking of deficient components and/or finished products to ensure efficient operation.Ability to read and utilize work orders in the production process. Informs management on issues related to quality, production, and/or safety which may adversely impact meeting the areas goals. Manages parts bin quantities and notifies the production supervisor or lead person when quantities are low or insufficient to maintain production.Documents actions by completing required production and quality forms.Maintains a clean and safe work area by complying with company procedures.Monitors machinery and advises maintenance of necessary repairs.Performs other duties as assigned.Working hours: 7:00 AM - 3:30 PMSkills:Good attendanceAssembly experience is a plus, but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand for 8 hours APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Oh, Hi, just Spherion here with another great opportunity, with a great company, with great hours, right here in Mankato. We have a client in need of assembly workers. Oh, you don't have experience with assembly? That is OKAY! This client is willing to train, bright, motivated individuals likes yourself, so have no fear!This is a 1st shift position; Monday - Friday 7:00AM-3:30PMResponsibilities:Performs assembly on assigned products using machinery and/or tools as well as correct production methods to ensure accuracy and quality of finished products. Maintains production output levels consistent with set standards. May perform testing, quality inspections and reworking of deficient components and/or finished products to ensure efficient operation.Ability to read and utilize work orders in the production process. Informs management on issues related to quality, production, and/or safety which may adversely impact meeting the areas goals. Manages parts bin quantities and notifies the production supervisor or lead person when quantities are low or insufficient to maintain production.Documents actions by completing required production and quality forms.Maintains a clean and safe work area by complying with company procedures.Monitors machinery and advises maintenance of necessary repairs.Performs other duties as assigned.Working hours: 7:00 AM - 3:30 PMSkills:Good attendanceAssembly experience is a plus, but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand for 8 hours APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $16.00 - $18.00 per hour
      • 6:00 AM - 2:30 PM
      Support receiving department by aiding in the completion of variety of tasks as assigned by the Receiving Specialist.Responsibilities:?Perform assignments in accordance with established safety policies and procedures. ?Adhere to the Quality Policy, including all items assigned to this position in accordance with ISO policies, procedures and work instructions.?Comply with the work rules and standards set forth in the Kato Cable Employee Handbook. ?Display appropriate work ethics in the workplace and group settings which provides a positive influence on consumer workers. ?Maintain receiving inventory and inventory records.?Refer to work order or procedural instructions appropriate for each job, function or assignment before commencing kitting and inspection of product.?Receive, unpack and inspect materials and supplies.?Report damages and any discrepancies to the required departments. ?Perform any specified quality assurance checks designated for each job, function or assignment.?Operate tier-lift truck or use hand-truck to move, convey or hoist shipments from trucks, storage or work areas. ?Maintain good housekeeping and clean work areas in assigned work sites. ?Assure that all work assigned to position is performed in accordance with specifications, instructions and requirements.?Demonstrate ability to meet department requirement on specific assignments within a reasonable time, depending on the degree of difficulty of their job functions.?Act as shipping and kitting back-up, as needed.?Assist in production as needed.Working hours: 6:00 AM - 2:30 PMSkills:ACCOUNTABILITIES AND MEASURES--Ability to accomplish assigned tasks safely.--Adherence to the Quality Policy and ISO Procedural Requirements. --Ability to maintain clean work areas and follow good housekeeping practices. --Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs.--Ability to use any machinery/equipment required to accomplish any given job assignment.--Ability to work effectively, courteously and respectfully with other personnel.PHYSICAL DEMANDSStand------Walk------Sit------Use of Hands or Fingers------Reaching------Climb or Balance------Crouching or Kneeling------Talk or Hear------ --Weight Requirements -Rare/Occasional-Frequent-Constant0 - 50 lbs------frequently51 - 100 lbs------rare --Vision Requirementso-Close vision (clear vision at 20 inches or less)o-Distance vision (clear vision at 20 feet or more)o-Color vision (ability to identify and distinguish colors)o-Peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point)o-Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)o-Ability to adjust focus (ability to adjust the eye to bring an object into sharp focus)Education:High SchoolExperience:0-1 yearsQualifications:?Experience, Competencies and EducationMust possess an education or experience level that permits the employee to effectively communicate and perform duties, assignments and responsibilities of the job. Must have the ability to measure and read prints. Must also have basic computer knowledge.High school diploma or GED required.?Language SkillsAbility to read, analyze and interpret the documents relating to the job, function or assignment. ?Mathematical SkillsAbility to perform basic mathematical equations and understand product drawing references and tolerances. ?Reasoning AbilityAbility to make decisions when identifying in-process problems. Ability to deal with a variety of job assignments. Ability to deal with a v
      Support receiving department by aiding in the completion of variety of tasks as assigned by the Receiving Specialist.Responsibilities:?Perform assignments in accordance with established safety policies and procedures. ?Adhere to the Quality Policy, including all items assigned to this position in accordance with ISO policies, procedures and work instructions.?Comply with the work rules and standards set forth in the Kato Cable Employee Handbook. ?Display appropriate work ethics in the workplace and group settings which provides a positive influence on consumer workers. ?Maintain receiving inventory and inventory records.?Refer to work order or procedural instructions appropriate for each job, function or assignment before commencing kitting and inspection of product.?Receive, unpack and inspect materials and supplies.?Report damages and any discrepancies to the required departments. ?Perform any specified quality assurance checks designated for each job, function or assignment.?Operate tier-lift truck or use hand-truck to move, convey or hoist shipments from trucks, storage or work areas. ?Maintain good housekeeping and clean work areas in assigned work sites. ?Assure that all work assigned to position is performed in accordance with specifications, instructions and requirements.?Demonstrate ability to meet department requirement on specific assignments within a reasonable time, depending on the degree of difficulty of their job functions.?Act as shipping and kitting back-up, as needed.?Assist in production as needed.Working hours: 6:00 AM - 2:30 PMSkills:ACCOUNTABILITIES AND MEASURES--Ability to accomplish assigned tasks safely.--Adherence to the Quality Policy and ISO Procedural Requirements. --Ability to maintain clean work areas and follow good housekeeping practices. --Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs.--Ability to use any machinery/equipment required to accomplish any given job assignment.--Ability to work effectively, courteously and respectfully with other personnel.PHYSICAL DEMANDSStand------Walk------Sit------Use of Hands or Fingers------Reaching------Climb or Balance------Crouching or Kneeling------Talk or Hear------ --Weight Requirements -Rare/Occasional-Frequent-Constant0 - 50 lbs------frequently51 - 100 lbs------rare --Vision Requirementso-Close vision (clear vision at 20 inches or less)o-Distance vision (clear vision at 20 feet or more)o-Color vision (ability to identify and distinguish colors)o-Peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point)o-Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)o-Ability to adjust focus (ability to adjust the eye to bring an object into sharp focus)Education:High SchoolExperience:0-1 yearsQualifications:?Experience, Competencies and EducationMust possess an education or experience level that permits the employee to effectively communicate and perform duties, assignments and responsibilities of the job. Must have the ability to measure and read prints. Must also have basic computer knowledge.High school diploma or GED required.?Language SkillsAbility to read, analyze and interpret the documents relating to the job, function or assignment. ?Mathematical SkillsAbility to perform basic mathematical equations and understand product drawing references and tolerances. ?Reasoning AbilityAbility to make decisions when identifying in-process problems. Ability to deal with a variety of job assignments. Ability to deal with a v
      • Mankato, Minnesota
      • Permanent
      • $25.00 - $27.00 per hour
      • 7:00 AM - 5:00 PM
      Build and maintain production fixtures and assist with the creation and sustainment of test programs. This position will also support continuous improvement methods, and the Engineering Department as needed in a variety of other areas, such as PPAPs, final assembly documentation, prototyping, and time studies.Responsibilities:Build and maintain production fixtures (harness boards, test fixtures, assembly fixtures, etc.).Assist production in building product per customer prints and work instructions. Maintain asset list.Work with employees to identify and develop continuous improvement strategies that will drive operational excellence, increased capacity and cost reductions.Conduct assessments/time studies of manufacturing operations to provide focused improvement opportunities.Assist in conducting research on capital purchases, develop return on investment justification that support the purchase.Support implementation and installation process on all process change efforts and new equipment by assisting with machine programming, set up, operation, maintenance and troubleshooting.Participate in new production builds by analyzing manufacturing processes to identify efficiency gains during new product introduction.Assist with in-process quality checks throughout the manufacturing process to verify instructions are being followed and built to print.Assist with the initiation and implementation of engineering change orders (ECO).Assist with reviewing job routings and work instruction packets before and after production builds.Assist with the creation of engineering documents (bill of materials, work instructions, job routings, receiving logs, and shipping instructions).Inspection of PPAP and First Article Inspection parts.Assist with building prototypes.Assist engineering with quoting. Have working knowledge and know how to navigate the ERP system.Participate in the Kato Cable 5S program.Participate in value stream map events.Complete time studies.Comply with UL and IPC Standards.Working hours: 7:00 AM - 5:00 PMSkills:-Microsoft Word-Microsoft Excel-Microsoft Outlook-General internet and computer use-Accomplishment of assigned tasks.-Adherence to the Quality Policy and ISO Procedural Requirements. -Ability to maintain clean work areas and follow good housekeeping practices. -Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs.-Ability to use any machinery/equipment required to accomplish any given job assignment.-Ability to work effectively, courteously and respectively with other personnel.PERSONALITYWe are looking for a self-driven, hands-on individual with a positive outlook, an emphasis on quality and preventative rather than reactive documentation, a natural forward planner who is able to multi-task efficiently, communication skills, and someone who is able to see things from the other persons point of view.Education:BachelorsExperience:1-4 yearsQualifications:Experience, Competencies and EducationBachelors degree in Manufacturing Engineering, Mechanical Engineering, or similar field. Minimum of 3 years of experience in a manufacturing environment. Experience with Lean Manufacturing, First Builds, PPAPs, UL, ISO. Experience with hands on process improvements and implementation of Lean principles. PREFERRED EXPERIENCEThree to five years of cable assembly/wire harness experience. Direct Hire position at a staple employer with Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Build and maintain production fixtures and assist with the creation and sustainment of test programs. This position will also support continuous improvement methods, and the Engineering Department as needed in a variety of other areas, such as PPAPs, final assembly documentation, prototyping, and time studies.Responsibilities:Build and maintain production fixtures (harness boards, test fixtures, assembly fixtures, etc.).Assist production in building product per customer prints and work instructions. Maintain asset list.Work with employees to identify and develop continuous improvement strategies that will drive operational excellence, increased capacity and cost reductions.Conduct assessments/time studies of manufacturing operations to provide focused improvement opportunities.Assist in conducting research on capital purchases, develop return on investment justification that support the purchase.Support implementation and installation process on all process change efforts and new equipment by assisting with machine programming, set up, operation, maintenance and troubleshooting.Participate in new production builds by analyzing manufacturing processes to identify efficiency gains during new product introduction.Assist with in-process quality checks throughout the manufacturing process to verify instructions are being followed and built to print.Assist with the initiation and implementation of engineering change orders (ECO).Assist with reviewing job routings and work instruction packets before and after production builds.Assist with the creation of engineering documents (bill of materials, work instructions, job routings, receiving logs, and shipping instructions).Inspection of PPAP and First Article Inspection parts.Assist with building prototypes.Assist engineering with quoting. Have working knowledge and know how to navigate the ERP system.Participate in the Kato Cable 5S program.Participate in value stream map events.Complete time studies.Comply with UL and IPC Standards.Working hours: 7:00 AM - 5:00 PMSkills:-Microsoft Word-Microsoft Excel-Microsoft Outlook-General internet and computer use-Accomplishment of assigned tasks.-Adherence to the Quality Policy and ISO Procedural Requirements. -Ability to maintain clean work areas and follow good housekeeping practices. -Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs.-Ability to use any machinery/equipment required to accomplish any given job assignment.-Ability to work effectively, courteously and respectively with other personnel.PERSONALITYWe are looking for a self-driven, hands-on individual with a positive outlook, an emphasis on quality and preventative rather than reactive documentation, a natural forward planner who is able to multi-task efficiently, communication skills, and someone who is able to see things from the other persons point of view.Education:BachelorsExperience:1-4 yearsQualifications:Experience, Competencies and EducationBachelors degree in Manufacturing Engineering, Mechanical Engineering, or similar field. Minimum of 3 years of experience in a manufacturing environment. Experience with Lean Manufacturing, First Builds, PPAPs, UL, ISO. Experience with hands on process improvements and implementation of Lean principles. PREFERRED EXPERIENCEThree to five years of cable assembly/wire harness experience. Direct Hire position at a staple employer with Health/Dental/ Vision, FSA, HSA, PTO, and 401(k) benefits .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 per hour
      • Various Shifts Available
      Provides excellent customer service to dealers, sales representatives, and consumers via phone, email, live chat andsocial media. Provides diagnostic advice to resolve technical product issues, order entry, and recommendations onproduct selection, and maintains accurate and up-to-date records on communications through computer applications.Responsibilities:Provides technical and sales support to consumers, dealers and sales reps to ensure efficient and accurate qualityservice relating to our products, their software, features and functions.Provides post-sale support to consumers and retail channel partners in the form of trouble-shooting advice to installand repair product or direct them to a qualified repair facility. Enter orders for replacement parts, finished products,repair authorizations, and facilitate returns process during or after the warranty period. Documents the interaction inthe appropriate computer application to help drive continuous improvements in process and product quality. Responds to inquiries, resolves routine issues (referring more difficult problems upward, if necessary), and educatesand acts as a resource on company products via phone, email and other methods as appropriate. Documentsinquires, issues and resolutions, and education provided as required.Provides pre-sale support to consumers and retail channel partners in the form of product selection based upon theapplication and desired features, installation and rigging, promotions, product availability, pricing, and where topurchase. Documents the interaction in the appropriate computer application to help drive continuous improvementsin process and product quality. Executes routine reports and independently creates reports to support department activities. Demonstratesproficiency in supporting the minimum amount of product families as identified by each Johnson Outdoors brand.Maintains and monitors personal performance metrics to ensure department KPI?s (key performance indicators).Strives for continuous improvement. Issues return and repair authorizations as necessary.Performs other duties as assigned.Working hours: Various Shifts AvailableSkills:- Excellent verbal and written communication skills to effectively work with a variety of individuals, identify and solveproblems and up-sell/cross-sell products. In addition to reading, writing and verbally communicating clearly in thenative language of the region the representative is serving, may be required to speak clearly in another languageas defined by the region.- General knowledge of the Microsoft Office (Word, Excel, Outlook) or similar products and the ability to easily learnapplications.- Demonstrated mechanical aptitude to comprehend and understand resource materials such as dimensionaldrawings, specifications, installation manuals, and owner/operator manuals to explain/educate the customer.- Demonstrated experience and skills in effectively and efficiently responding to customer inquiries using the phone,email, chat or other communication platforms provided to the department as a tool to perform their duties.- Skills in effectively problem solving routine issues and ability to escalate issues as needed.- Basic mathematical skills which include the ability to add, subtract, multiplication and division with the assistanceof a calculator.Education:High SchoolExperience:1-4 yearsQualifications:Previous call center experienceManically Aptitude Don't Wait! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder
      Provides excellent customer service to dealers, sales representatives, and consumers via phone, email, live chat andsocial media. Provides diagnostic advice to resolve technical product issues, order entry, and recommendations onproduct selection, and maintains accurate and up-to-date records on communications through computer applications.Responsibilities:Provides technical and sales support to consumers, dealers and sales reps to ensure efficient and accurate qualityservice relating to our products, their software, features and functions.Provides post-sale support to consumers and retail channel partners in the form of trouble-shooting advice to installand repair product or direct them to a qualified repair facility. Enter orders for replacement parts, finished products,repair authorizations, and facilitate returns process during or after the warranty period. Documents the interaction inthe appropriate computer application to help drive continuous improvements in process and product quality. Responds to inquiries, resolves routine issues (referring more difficult problems upward, if necessary), and educatesand acts as a resource on company products via phone, email and other methods as appropriate. Documentsinquires, issues and resolutions, and education provided as required.Provides pre-sale support to consumers and retail channel partners in the form of product selection based upon theapplication and desired features, installation and rigging, promotions, product availability, pricing, and where topurchase. Documents the interaction in the appropriate computer application to help drive continuous improvementsin process and product quality. Executes routine reports and independently creates reports to support department activities. Demonstratesproficiency in supporting the minimum amount of product families as identified by each Johnson Outdoors brand.Maintains and monitors personal performance metrics to ensure department KPI?s (key performance indicators).Strives for continuous improvement. Issues return and repair authorizations as necessary.Performs other duties as assigned.Working hours: Various Shifts AvailableSkills:- Excellent verbal and written communication skills to effectively work with a variety of individuals, identify and solveproblems and up-sell/cross-sell products. In addition to reading, writing and verbally communicating clearly in thenative language of the region the representative is serving, may be required to speak clearly in another languageas defined by the region.- General knowledge of the Microsoft Office (Word, Excel, Outlook) or similar products and the ability to easily learnapplications.- Demonstrated mechanical aptitude to comprehend and understand resource materials such as dimensionaldrawings, specifications, installation manuals, and owner/operator manuals to explain/educate the customer.- Demonstrated experience and skills in effectively and efficiently responding to customer inquiries using the phone,email, chat or other communication platforms provided to the department as a tool to perform their duties.- Skills in effectively problem solving routine issues and ability to escalate issues as needed.- Basic mathematical skills which include the ability to add, subtract, multiplication and division with the assistanceof a calculator.Education:High SchoolExperience:1-4 yearsQualifications:Previous call center experienceManically Aptitude Don't Wait! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder
      • Mankato, Minnesota
      • Temp to Perm
      • $17.00 per hour
      • 5:00 PM - 5:00 AM
      Spherion Staffing is looking for energetic and quality driven team members to join our manufacturing team! We currently have an open position in our clients press department running and operating equipment. Shifts AvailableThis is an overnight position working 12 hour shifts, 3 days a week working Sunday through Tuesday - OR - Wednesday through Friday.Responsibilities:Set up and operate feeder end of pressRetrieve stock for jobs to be printed.Have knowledge of paper weights, finishes, grain, direction, etc.Obtain stock and cut it to specifications when necessary.Keep press properly supplied of ink, chemicals, blankets, etc.Notify lead operator of low inventory of house inks or paper.Ensure that equipment is cleaned and maintained in proper working condition. Notify lead operator of any concerns.Keep work area and equipment clean.Able to distinguish color variances while jobs are running on press.Perform other related duties as requested.Working hours: 5:00 PM - 5:00 AMSkills:Working ConditionsOn Feet entire shiftLifting up to 50 lbs.Repetitive bending, twisting, joggingEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma/GED and drug test required APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for energetic and quality driven team members to join our manufacturing team! We currently have an open position in our clients press department running and operating equipment. Shifts AvailableThis is an overnight position working 12 hour shifts, 3 days a week working Sunday through Tuesday - OR - Wednesday through Friday.Responsibilities:Set up and operate feeder end of pressRetrieve stock for jobs to be printed.Have knowledge of paper weights, finishes, grain, direction, etc.Obtain stock and cut it to specifications when necessary.Keep press properly supplied of ink, chemicals, blankets, etc.Notify lead operator of low inventory of house inks or paper.Ensure that equipment is cleaned and maintained in proper working condition. Notify lead operator of any concerns.Keep work area and equipment clean.Able to distinguish color variances while jobs are running on press.Perform other related duties as requested.Working hours: 5:00 PM - 5:00 AMSkills:Working ConditionsOn Feet entire shiftLifting up to 50 lbs.Repetitive bending, twisting, joggingEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma/GED and drug test required APPLY TODAY!Spherion is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $15.81 per hour
      • 9:00 PM - 7:00 AM
      Our client in North Mankato needs assemblers, people who want to work FT hours..on the OVERNIGHT, and learn new skills on the job! Entry level position in the Assembly Department for training and learning assembly processes. Assembles and tests sub-assemblies for finished products, valves, or hydraulic cylinders. Performs the following duties under the close supervision of a Manufacturing Supervisor.Responsibilities:Will include, but not limited to the following areas:Gathers blueprints, routing sheets, setting specifications, and all related fixtures and tools necessary to assembly the products when directed. Moves parts to assembly area from storage racks. Fastens parts together with bolts, screws, speed clips, or other fasteners. Uses blueprints, routing sheets, settings specifications, required hand tools and fixtures, and test benches to assist in assembly operation. Uses a variety of hand tools in a safe manner. Assembles parts into repair kits and switches; then packages and moves the products to the shipping department for further processing. Replaces all paper work from assigned job(s); cleans workstation and area for next job. Inspects products prior to packaging and returns rejected products to production departments.Observes packaging operations and inspects containers to verify conformance to specifications.Requisitions containers and other supplies of delivery to work stations.Establishes or adjusts work procedures to meet production schedules. Tallies number of products packaged or records information such as type of products packaged.Learns and maintains time and production records.Operates pallet jack to assist in loading or moving materials and products. Packs parts properly to prevent damage during transportation to next operation. Works overtime as requested/required by supervisor.Follows and monitors work instructions and ISO procedures.Looks for and recommends product and process improvements in support of corporate goals, objectives and activities.Working hours: 9:00 PM - 7:00 AMSkills:Ability to read and understand work instructions. Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, Engineering prints and drawings as well as procedure manuals. Ability to communicate effectively with shipping clerks, other assembly and shop personnel.Education:High SchoolExperience:0-1 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or disabilities to perform the essential functions.High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client in North Mankato needs assemblers, people who want to work FT hours..on the OVERNIGHT, and learn new skills on the job! Entry level position in the Assembly Department for training and learning assembly processes. Assembles and tests sub-assemblies for finished products, valves, or hydraulic cylinders. Performs the following duties under the close supervision of a Manufacturing Supervisor.Responsibilities:Will include, but not limited to the following areas:Gathers blueprints, routing sheets, setting specifications, and all related fixtures and tools necessary to assembly the products when directed. Moves parts to assembly area from storage racks. Fastens parts together with bolts, screws, speed clips, or other fasteners. Uses blueprints, routing sheets, settings specifications, required hand tools and fixtures, and test benches to assist in assembly operation. Uses a variety of hand tools in a safe manner. Assembles parts into repair kits and switches; then packages and moves the products to the shipping department for further processing. Replaces all paper work from assigned job(s); cleans workstation and area for next job. Inspects products prior to packaging and returns rejected products to production departments.Observes packaging operations and inspects containers to verify conformance to specifications.Requisitions containers and other supplies of delivery to work stations.Establishes or adjusts work procedures to meet production schedules. Tallies number of products packaged or records information such as type of products packaged.Learns and maintains time and production records.Operates pallet jack to assist in loading or moving materials and products. Packs parts properly to prevent damage during transportation to next operation. Works overtime as requested/required by supervisor.Follows and monitors work instructions and ISO procedures.Looks for and recommends product and process improvements in support of corporate goals, objectives and activities.Working hours: 9:00 PM - 7:00 AMSkills:Ability to read and understand work instructions. Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, Engineering prints and drawings as well as procedure manuals. Ability to communicate effectively with shipping clerks, other assembly and shop personnel.Education:High SchoolExperience:0-1 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or disabilities to perform the essential functions.High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $15.81 per hour
      • Various Shifts Available
      1 for 3rd shift (Monday - Thursday from 11pm to 7am) $15.81Operates machining centers, turning centers, centerless grinders and hand operations, by performing the following essential duties and responsibilities, but not limited to the followingResponsibilities:Will include, but not limited to the following areas:Perform change overs and operate work centers as instructed by the Production Team Leader.Setup and operate drill presses, hones and other hand and power tools. Look for and suggest improvements to processes and operations to the Production Team Leader.Seek assistance from a CNC Lead Setter when production issues arise.Monitor quality per ISO work instructions.Perform tool offset adjustments and tool changes as needed to maintain required quality of parts.Pack parts properly to prevent damage during transportation to next operation.Create Documents Change Request (DCR) using kbox when needed to correct or upgrade process documentation.Interpret blueprint and job specifications to determine dimensions and tolerances.Perform inspections and tests to ensure parts meet the quality dictated by associated technical documents.Operate equipment per written instructions.Read and operate inspection equipment to insure a quality product at all times.Assigned work area, tools and gauges will be clean, and kept neat, safe and orderly at all times.Follow all company policies and procedures and applicable laws.Will work overtime as requested by supervisor.Recognize and comply with all safety rules. Hearing and Eye protection will be worn when required.Working hours: Various Shifts AvailableSkills:TRAINING / SAFETY REQUIREMENTS:Employees must complete general safety training such as Right to Know (includes: Hazardous Communication, Emergency Response Plan, AWAIR, and Forklift & Pedestrian Safety) annually. The employee must follow the rules stated in our safety policies and programs including but not limited to the Shop Safety rules. The employee is to report any unsafe conditions, unsafe acts, near misses, illnesses, and injuries to their supervisor immediately.EDUCATION and/or EXPERIENCE: High School Diploma or GED.LANGUAGE SKILLS: Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent).REASONING ABILITY: Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS and ABILITIES: Ability to read blue prints and precision measuring tool/instruments. Ability to operate a computer and have working knowledge of Microsoft Word and Excel. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; and talk or hear. The employee is occasionally required to walk and reach with hands and arms.The employee must occasionally lift and/or move up to 50 pounds. The employee is required to request assistance for anything exceeding 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.Education:High SchoolExperience:1-4 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Don't Wait! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      1 for 3rd shift (Monday - Thursday from 11pm to 7am) $15.81Operates machining centers, turning centers, centerless grinders and hand operations, by performing the following essential duties and responsibilities, but not limited to the followingResponsibilities:Will include, but not limited to the following areas:Perform change overs and operate work centers as instructed by the Production Team Leader.Setup and operate drill presses, hones and other hand and power tools. Look for and suggest improvements to processes and operations to the Production Team Leader.Seek assistance from a CNC Lead Setter when production issues arise.Monitor quality per ISO work instructions.Perform tool offset adjustments and tool changes as needed to maintain required quality of parts.Pack parts properly to prevent damage during transportation to next operation.Create Documents Change Request (DCR) using kbox when needed to correct or upgrade process documentation.Interpret blueprint and job specifications to determine dimensions and tolerances.Perform inspections and tests to ensure parts meet the quality dictated by associated technical documents.Operate equipment per written instructions.Read and operate inspection equipment to insure a quality product at all times.Assigned work area, tools and gauges will be clean, and kept neat, safe and orderly at all times.Follow all company policies and procedures and applicable laws.Will work overtime as requested by supervisor.Recognize and comply with all safety rules. Hearing and Eye protection will be worn when required.Working hours: Various Shifts AvailableSkills:TRAINING / SAFETY REQUIREMENTS:Employees must complete general safety training such as Right to Know (includes: Hazardous Communication, Emergency Response Plan, AWAIR, and Forklift & Pedestrian Safety) annually. The employee must follow the rules stated in our safety policies and programs including but not limited to the Shop Safety rules. The employee is to report any unsafe conditions, unsafe acts, near misses, illnesses, and injuries to their supervisor immediately.EDUCATION and/or EXPERIENCE: High School Diploma or GED.LANGUAGE SKILLS: Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent).REASONING ABILITY: Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS and ABILITIES: Ability to read blue prints and precision measuring tool/instruments. Ability to operate a computer and have working knowledge of Microsoft Word and Excel. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; and talk or hear. The employee is occasionally required to walk and reach with hands and arms.The employee must occasionally lift and/or move up to 50 pounds. The employee is required to request assistance for anything exceeding 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.Education:High SchoolExperience:1-4 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Don't Wait! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 48 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.