Thank you for subscribing to your personalized job alerts.

    186 jobs found in Minnesota

    Filter1
    Clear all
      • Luverne, Minnesota
      • Permanent
      • $19.00 - $21.00 per hour
      • 7:00 AM - 7:00 PM
      Spherion Staffing is hiring for Lab Technicians to work with a local client. The Lab Technician will be responsible for assisting in implementing the quality control and quality assurance programs of the company. Pay $19.00-21.00/hour DOEMonday-Friday 7AM - 7PM Responsibilities:-Conduct quality control tests on process streams and finished products-Coordinate and communicate with operators test results-Maintain accurate records of lab tests and transfer data -Inventory control in lab-Conduct regular house cleaning duties-Perform other duties within the finishing department or other areas as assigned-Maintain a clean and organized work environmentResponsibilities:See AboveWorking hours: 7:00 AM - 7:00 PMSkills:Requirements:-Associates Degree-Previous ethanol experience preferred-Ability to walk, climb ladders and steps, lift up to 50 lbs., and work at heights-Must possess strong attention to detail-Basic computer skillsEducation:AssociateExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Jane Buum at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is hiring for Lab Technicians to work with a local client. The Lab Technician will be responsible for assisting in implementing the quality control and quality assurance programs of the company. Pay $19.00-21.00/hour DOEMonday-Friday 7AM - 7PM Responsibilities:-Conduct quality control tests on process streams and finished products-Coordinate and communicate with operators test results-Maintain accurate records of lab tests and transfer data -Inventory control in lab-Conduct regular house cleaning duties-Perform other duties within the finishing department or other areas as assigned-Maintain a clean and organized work environmentResponsibilities:See AboveWorking hours: 7:00 AM - 7:00 PMSkills:Requirements:-Associates Degree-Previous ethanol experience preferred-Ability to walk, climb ladders and steps, lift up to 50 lbs., and work at heights-Must possess strong attention to detail-Basic computer skillsEducation:AssociateExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Jane Buum at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • St Peter, Minnesota
      • Permanent
      • $18.50 per hour
      • 5:00 PM - 3:30 AM
      DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 5:00 p.m. - 3:30 a.m., OT every other FridayPay: $18.50/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 5:00 PM - 3:30 AMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      DIRECT HIRE ALERT!!! Spherion, in partnership with Alumacraft in St. Peter is seeking out a Quality Inspector The Quality Inspector is responsible for performing inspections/tests/audits on products and boats at various stages of production, to ensure that customer specifications are being met and company quality standards are followed. Knowledge and comprehension of quality standards is essential.Hours: Monday - Thursday 5:00 p.m. - 3:30 a.m., OT every other FridayPay: $18.50/hour plus excellent benefitsResponsibilities:Follow and communicate the use of quality procedures throughout all phases of production.Test and inspect products at various stages of the production process.Perform daily quality checks and audits.Assist with creating comprehensive quality control documentation for quality issues.Directly work with the production team on quality issues, findings and to improve overall quality.Assist with approving or rejecting raw materials or purchased product. Prepare graphs or charts of data or enters data into computer for analysis.Compile and evaluate statistical data to determine and maintain quality and reliability of products.Interpret engineering drawings, schematic diagrams, or formulas to assist in determining quality and reliability standards.Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.Prepare and submit reports to the Quality Manager as required.Monitor the use of equipment to ensure it is safe and well-maintained. Assists and/or trains operators on part visual acceptability, and measurement and process procedures.Reports quality problems or findings to Quality Manager and follows up to ensure that corrective action has/will take place.Ensures that all safety measures are within compliance of company policies.Works collaboratively managers, supervisors, and leads.Drives continuous improvement to improve quality.Support supplier quality engineer tasks and assignments ( eg, product cycle counts, complete internal NCMR reporting).Working hours: 5:00 PM - 3:30 AMSkills:Relevant manufacturing experience.Computer literate.Must possess excellent communication skills.General knowledge of metal fabrication and paint.A keen eye for detail and a results-driven approach.Basic math skills.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work independently with limited supervision.Flexibility based on plant production schedules.Ability to interpret blueprints.Self-motivated. If you're a night owl looking for a great new career, call Jennifer at 507-934-8259 to schedule an immediate interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.50 - $19.50 per hour
      • 11:00 PM - 7:00 AM
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 11:00 PM - 7:00 AMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. COME AND GET THEM - GREAT PERMANENT JOB OPPORTUNITIES!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 11:00 PM - 7:00 AMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. COME AND GET THEM - GREAT PERMANENT JOB OPPORTUNITIES!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.50 - $19.50 per hour
      • 3:00 PM - 11:00 PM
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 3:00 PM - 11:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. WONDERFUL FULL-TIME DIRECT HIRE POSITIONS!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 3:00 PM - 11:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. WONDERFUL FULL-TIME DIRECT HIRE POSITIONS!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.50 - $19.50 per hour
      • 7:00 AM - 3:00 PM
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Safely operate burnisher machines while maintaining established quality standards, work schedules, deburring of parts for further operations.Responsibilities:Use lift to load parts into burnisher.Fill burnisher machine with required amount of parts, set machine checks to ensure burnishing chemicals are being dispensed and sprayers are working properly.Runs burnisher for required time and removes burnished parts; properly sets unloading gate so separator and dryer are not overloaded.Adds burnishing media to vibratory burnisher as necessary.Cleans overflow baskets and screens as necessary to keep burnishers in good operating condition.Checks burnished parts to ensure established quality and processing standards are being met.Moves parts to and from burnishing locations.Follows dispatch list in ordering parts in preparation for particular job to be done.Maintains accurate production records and resolves shop order discrepancies.Keeps work areas around machines in a clean and orderly fashion to minimize safety hazards.Notifies Lead or Supervisor of operation problems and unsafe conditions.Performs preventative maintenance to maintain equipment.Performs other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Aptitude for computer programmingAbility to use hand toolsAbility to set up, operate and run machinesEducation:No Degree RequiredExperience:1-4 yearsQualifications:Manual dexterity to operate, adjust and maintain burnishing machines. Use common hand tools and overhead hoist. Basic skills required to compute numbers accurately. Ability to read shop orders and work instructions/procedures. APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Perham, Minnesota
      • Temp to Perm
      • $15.90 per hour
      • 3:30 PM - 12:00 AM
      Spherion Staffing is currently seeking to fill a cleaning role with a client in Perham, MN. The ideal candidate will be task-oriented and be a team player.Responsibilities:- Perform routine cleaning tasks and daily light maintenance functions- Vacuuming, sweeping, dusting- Move, setup, rearrange and take down furniture and equipment for daily use and special events- Empty and take out trash- Other duties as assignedWorking hours: 3:30 PM - 12:00 AMSkills:- Team player- Task-orientedEducation:High SchoolExperience:0-1 yearsQualifications:- Ability to follow both oral and written instruction- Ability to lift and push up to 50 lbsSchedule:Mon - Fri 3:30 pm - 12 am To be considered, please apply online at www.spherion.com/perhamIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is currently seeking to fill a cleaning role with a client in Perham, MN. The ideal candidate will be task-oriented and be a team player.Responsibilities:- Perform routine cleaning tasks and daily light maintenance functions- Vacuuming, sweeping, dusting- Move, setup, rearrange and take down furniture and equipment for daily use and special events- Empty and take out trash- Other duties as assignedWorking hours: 3:30 PM - 12:00 AMSkills:- Team player- Task-orientedEducation:High SchoolExperience:0-1 yearsQualifications:- Ability to follow both oral and written instruction- Ability to lift and push up to 50 lbsSchedule:Mon - Fri 3:30 pm - 12 am To be considered, please apply online at www.spherion.com/perhamIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Perham, Minnesota
      • Temporary
      • $18.00 - $20.00 per hour
      • 6:00 AM - 4:00 PM
      Spherion is seeking a general laborer to work at a client location in Perham, MN. This is a temporary position that may lead to a longer assignment.Responsibilities:- Operate hand tool to grind out holes filled with dried feed on pellet mill rollers- Place roller in grinding machine- Sweep, keep work area clean and free of debris- Quality check parts upon completion- Other duties as assignedWorking hours: 6:00 AM - 4:00 PMSkills:- Task orientedEducation:No Degree RequiredExperience:0-1 yearsQualifications:- Ability to stand for long periods of time- Ability to lift up to 50 lbsSchedule: Mon - Fri 6 am - 4 pm. Flexible on start time To be considered, please apply online at www.spherion.com/perhamIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is seeking a general laborer to work at a client location in Perham, MN. This is a temporary position that may lead to a longer assignment.Responsibilities:- Operate hand tool to grind out holes filled with dried feed on pellet mill rollers- Place roller in grinding machine- Sweep, keep work area clean and free of debris- Quality check parts upon completion- Other duties as assignedWorking hours: 6:00 AM - 4:00 PMSkills:- Task orientedEducation:No Degree RequiredExperience:0-1 yearsQualifications:- Ability to stand for long periods of time- Ability to lift up to 50 lbsSchedule: Mon - Fri 6 am - 4 pm. Flexible on start time To be considered, please apply online at www.spherion.com/perhamIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $22.50 - $26.50 per hour
      • 11:00 PM - 7:00 AM
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 11:00 PM - 7:00 AMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. HURRY TO THESE JOBS, BEFORE THEY DISAPPEAR !!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 11:00 PM - 7:00 AMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. HURRY TO THESE JOBS, BEFORE THEY DISAPPEAR !!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $22.50 - $26.50 per hour
      • 3:00 PM - 11:00 PM
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. FANTASTIC OPPORTUNITIES !!! DO NOT WAIT - WE WANT TO GET YOU IN A JOB !!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 3:00 PM - 11:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. FANTASTIC OPPORTUNITIES !!! DO NOT WAIT - WE WANT TO GET YOU IN A JOB !!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $22.50 - $26.50 per hour
      • 7:00 AM - 3:00 PM
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years??? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. APPLY & SHOW US WHAT YOUR MADE OF!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform the more complex and responsible duties in the installation, maintenance and repair of company machinery, equipment, facilities, and personnel.Responsibilities:Diagnose and repair machinery and equipment operating problems and breakdowns as promptly as possible to minimize production downtime.install new machinery, fixtures and necessary plumbing and related hook-ups for the machinery to become fully operational.Diagnose, disassemble, repair and rebuild various company equipment and machines. Make or order required parts for service or repair of equipment or machines, using considerable care to prevent damage to the tools or equipment that are being work on. Perform a variety of duties related to the maintenance and repair of machinery and equipment as assigned.Work with engineering on the design and fabrication of new equipment and machines, as assigned.Build machine guards, shields, chutes, trays, racks, tanks, and related attachments to facilitate production or increase safety.Respond to chemical spills, fires, and injuries to company employees, providing first responder assistance until the arrival of ambulance, and assist ambulance personnel, if requested.Must be knowledgeable in the safety requirements of handling chemicals and/or hazardous waste.Perform preventive maintenance on machines and equipment to ensure they are operating correctly and safely.Perform other responsible maintenance duties involving carpentry, plumbing, painting, welding, brazing, cutting and hydraulics in repairing or improving plant facilities, machinery or equipment.Perform other duties as assignedWorking hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Considerable mechanical aptitude, use a variety of hand tools and equipment, basic computer skills, and the ability to work with a wide range of people while working under general supervision. The incumbent must be able to work weekends providing 24-hour security for the facility. This includes on-call rotation for security purposes.Learning Period - 12 to 18 months is required to learn the basics of this job. Three or more years are necessary to handle all aspects of the job with minimal supervision. Supervision Received - Under general supervision, only exceptional problems are referred to the supervisor. Assignments are specific, and the incumbent selects from a variety of established procedures to complete tasks.Problem Solving and Decision Making - Diagnose machine breakdown and proceed with or recommend repairs or parts needed to complete job. Work independently on many projects, determining most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time or money.Relations with Others - Works with people from all areas of the company, such as engineering, supervisors, and managers. May participate in small group activities such as task teams, pit crews, safety meetings, and other improvement efforts.Education:No Degree RequiredExperience:1-4 yearsQualifications:Experience and Training - High school graduate or equivalent with one year in an Industrial Maintenance Mechanic vocational program, or one years??? experience as a maintenance mechanic. The incumbent must have an understanding of hydraulic and pneumatic systems, and be able to read and understand hydraulic and pneumatic prints. Must be able to read mechanical blueprints, weld, braze, and cut with a torch and/or plasma cutter, read precision measuring equipment (internal and external micrometers), precision level, feeler and pin gauges. The incumbent should have the ability to use a lathe and mill. The position holder must have completed or will complete the following list of training: ERT (Emergency Response Training), Confined Space Training, Spill Training, and on-line training for hydraulics, safety, pneumatics, and other programs, as available.Additional preferred qualifications - Possess own tools and toolbox. APPLY & SHOW US WHAT YOUR MADE OF!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $20.00 - $28.00 per hour
      • 8:00 AM - 5:00 PM
      Auto Repair Mechanic at a FULL-SERVICE well established, locally owned, reputable Auto Repair shop in Albert Lea with a 4.9 Star Rating!Responsibilities:Service and repair all makes and models of vehiclesWorking hours: 8:00 AM - 5:00 PMSkills:Current certifications and 1-5 yrs of experience preferred but interested in any and all applicants with mechanical skillsEducation:No Degree RequiredExperience:1-4 yearsQualifications:No HS Diploma required Mechanical skillsDependable Passing Drug Screen Direct Hire position with a team that appreciates your skills and talents! We are better together! This team builds you up so you enjoy going to work every day!Earn up to 60K!! No weekends! Monday through Friday. 8-5 with an hour for lunch.PAID vacations!PAID holidays!Retirement plan!Uniforms PAID!Bonus program!Family owned business! Serving our community since 1985!Access to the cutting-edge equipment and information!Personal workstation and tablet.Skilled and experienced Service Writers!Well established customer base!Owners that care about you and your family!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Auto Repair Mechanic at a FULL-SERVICE well established, locally owned, reputable Auto Repair shop in Albert Lea with a 4.9 Star Rating!Responsibilities:Service and repair all makes and models of vehiclesWorking hours: 8:00 AM - 5:00 PMSkills:Current certifications and 1-5 yrs of experience preferred but interested in any and all applicants with mechanical skillsEducation:No Degree RequiredExperience:1-4 yearsQualifications:No HS Diploma required Mechanical skillsDependable Passing Drug Screen Direct Hire position with a team that appreciates your skills and talents! We are better together! This team builds you up so you enjoy going to work every day!Earn up to 60K!! No weekends! Monday through Friday. 8-5 with an hour for lunch.PAID vacations!PAID holidays!Retirement plan!Uniforms PAID!Bonus program!Family owned business! Serving our community since 1985!Access to the cutting-edge equipment and information!Personal workstation and tablet.Skilled and experienced Service Writers!Well established customer base!Owners that care about you and your family!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 3:00 PM - 1:15 AM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 3:00 PM - 1:15 AMSkills:--Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.--Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.--Fabricate components from blueprints and verbal instructions.--Perform assignments in accordance with written quality procedures.--Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.--Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! ?Medical & ST Disability?HRA ? 100% Employer Contribution, helps pay medical deductible?Free Clinic ? For employees and dependents?LT Disability & Life Insurance ? 100% Employer Paid
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.Responsibilities:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Working hours: 3:00 PM - 1:15 AMSkills:--Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.--Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.--Fabricate components from blueprints and verbal instructions.--Perform assignments in accordance with written quality procedures.--Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.--Ensure compliance to safety rules and procedures.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! ?Medical & ST Disability?HRA ? 100% Employer Contribution, helps pay medical deductible?Free Clinic ? For employees and dependents?LT Disability & Life Insurance ? 100% Employer Paid
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 8:00 AM - 4:30 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Temp to Perm
      • $18.00 per hour
      • 2:30 PM - 1:00 AM
      A leader in portable and permanent power distribution solutions. The Distro Assembler will be responsible for building small electrical boxes to very large boxes. Must be able to follow blue pints and directions. This is a physical position.Responsibilities:Building small to very large boxesRead and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsPerform other duties and projects as assignedWorking hours: 2:30 PM - 1:00 AMSkills:-Ability to read instructions, safely operate machines and visually inspect parts produced-Accuracy and timeliness in completion of work assignments is a must-Excellent communication skills-Frequent lifting, standing, and bending required-Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts-Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices We value our employees and look for people that want to grow with our company. We have a very clean new plant with super helpful friendly Supervisors! A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A leader in portable and permanent power distribution solutions. The Distro Assembler will be responsible for building small electrical boxes to very large boxes. Must be able to follow blue pints and directions. This is a physical position.Responsibilities:Building small to very large boxesRead and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsPerform other duties and projects as assignedWorking hours: 2:30 PM - 1:00 AMSkills:-Ability to read instructions, safely operate machines and visually inspect parts produced-Accuracy and timeliness in completion of work assignments is a must-Excellent communication skills-Frequent lifting, standing, and bending required-Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts-Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices We value our employees and look for people that want to grow with our company. We have a very clean new plant with super helpful friendly Supervisors! A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Temp to Perm
      • $17.00 per hour
      • 6:00 AM - 2:30 PM
      A leader in portable and permanent power distribution solutions. Under the direction of the Supervisor and/or the Value Stream Manager, the Ditro Assembler will be responsible for building small electrical boxes to very large boxes. Must be able to follow blue pints and directions. This is a physical position.Responsibilities:?Building small to very large boxes?Read and interpret engineering drawings as needed for accurate and safe performance of the job?Following Standard Operating Procedures and/or Standard Work?Ensure a high level of quality by completing required in-process quality checks?Follow work order directions and safely produce the quantity of parts required and within the required specifications?Complete and maintain all required paperwork necessary in the operation?Operate specific assembly tools?Perform other duties and projects as assignedWorking hours: 6:00 AM - 2:30 PMSkills:--Ability to read instructions, safely operate machines and visually inspect parts produced--Accuracy and timeliness in completion of work assignments is a must--Excellent communication skills--Frequent lifting, standing, and bending required--Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts--Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. ?Basic understanding & reading of specifications & blueprints?Basic understanding of assembly?Basic understanding of basic electrical assembly?Knowledge of assembly practices CALL TO ACTION:We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A leader in portable and permanent power distribution solutions. Under the direction of the Supervisor and/or the Value Stream Manager, the Ditro Assembler will be responsible for building small electrical boxes to very large boxes. Must be able to follow blue pints and directions. This is a physical position.Responsibilities:?Building small to very large boxes?Read and interpret engineering drawings as needed for accurate and safe performance of the job?Following Standard Operating Procedures and/or Standard Work?Ensure a high level of quality by completing required in-process quality checks?Follow work order directions and safely produce the quantity of parts required and within the required specifications?Complete and maintain all required paperwork necessary in the operation?Operate specific assembly tools?Perform other duties and projects as assignedWorking hours: 6:00 AM - 2:30 PMSkills:--Ability to read instructions, safely operate machines and visually inspect parts produced--Accuracy and timeliness in completion of work assignments is a must--Excellent communication skills--Frequent lifting, standing, and bending required--Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts--Attention to detail is a mustEducation:High SchoolExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. ?Basic understanding & reading of specifications & blueprints?Basic understanding of assembly?Basic understanding of basic electrical assembly?Knowledge of assembly practices CALL TO ACTION:We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Temp to Perm
      • $17.00 per hour
      • 5:00 AM - 2:30 PM
      Pre Assembler will be working with hand tools and looking at sales order sheets. This is a very hands on position and can be physical at times. The candidate needs to be able to communicate, read and follow directions. This is a standing position for 8hrs or more.Responsibilities:Pre Assembler will be working with hand tools and looking at sales order sheets. Read and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsSome electrical wiringPerform other duties and projects as assignedWorking hours: 5:00 AM - 2:30 PMSkills:-Ability to read instructions, safely operate machines and visually inspect parts produced-Accuracy and timeliness in completion of work assignments is a must-Excellent communication skills-Frequent lifting, standing, and bending required-Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts-Attention to detail is a mustEducation:No Degree RequiredExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices LOVE YOUR JOB! Everyone we place here says they LOVE their job! CLEAN, NEW, TEMPURATURE CONTROLLED FACILITY, with thee friendliest staff! These are PERMANENT POSITIONS! We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Pre Assembler will be working with hand tools and looking at sales order sheets. This is a very hands on position and can be physical at times. The candidate needs to be able to communicate, read and follow directions. This is a standing position for 8hrs or more.Responsibilities:Pre Assembler will be working with hand tools and looking at sales order sheets. Read and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsSome electrical wiringPerform other duties and projects as assignedWorking hours: 5:00 AM - 2:30 PMSkills:-Ability to read instructions, safely operate machines and visually inspect parts produced-Accuracy and timeliness in completion of work assignments is a must-Excellent communication skills-Frequent lifting, standing, and bending required-Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts-Attention to detail is a mustEducation:No Degree RequiredExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practices LOVE YOUR JOB! Everyone we place here says they LOVE their job! CLEAN, NEW, TEMPURATURE CONTROLLED FACILITY, with thee friendliest staff! These are PERMANENT POSITIONS! We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.50 - $40.50 per hour
      • 11:00 PM - 7:00 AM
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste.Perform other duties as assigned.Working hours: 11:00 PM - 7:00 AMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools WHAT ARE YOU WAITING FOR?! APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste.Perform other duties as assigned.Working hours: 11:00 PM - 7:00 AMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools WHAT ARE YOU WAITING FOR?! APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.50 - $40.50 per hour
      • 3:00 PM - 11:00 PM
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 3:00 PM - 11:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! THESE OPPORTUNITIES ARE PASSING YOU BY.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 3:00 PM - 11:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! THESE OPPORTUNITIES ARE PASSING YOU BY.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.50 - $40.50 per hour
      • 7:00 AM - 3:00 PM
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! JOBS ARE DISAPPEARING FAST.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform all electrical installations, maintenance and repair of company equipment; perform or assist in the installation, maintenance and repair of mechanical, hydraulic, pneumatic and plumbing systems.Responsibilities:Perform a variety of electrical functions for installing or repairing equipment and machines in both plant and offices.Calculate load requirements of all new equipment and install new circuits.Install new machinery, fixtures and necessary electric, plumbing and related hook-ups for the equipment to become fully operational.Diagnose problems and repair machinery and equipment as promptly as possible to minimize down time; includes all electrical, hydraulic, mechanical and pneumatic machine operationsDetermine repair parts and supplies needed and requisition them through Maintenance Supervisor or LeadRecord all electrical installations requiring state inspection in the Electrical Inspection Log.Follow job site safety policies and procedures to prevent injury to self and/or others; i.e. safety lockout devices, warning signs, face shields etc.Assist in developing and perform preventive and predictive maintenance on equipment and machines in plant and office.Assist in training B Electricians on job requirements and monitor their work to assure it is accordance with established methods and procedures.Use a variety of skilled trade technologies to repair and/or rebuild equipment.Must be knowledgeable of the safety requirements in the handling of chemicals and/or hazardous waste. Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Must have electrical and mechanical skills, hydraulic and pneumatic skills, ability to read blueprints and schematic drawings. Able to work cooperatively with people form all areas of the company.Six Months to a year is necessary to learn the basics of the job. Three or more years on the job in addition to prior experience is necessary to handle all aspects of the job with minimal supervision.Position receives general supervision, only exceptional problems are referred to the supervisor. Assignments for projects are usually specifically assigned, those for repairs are in order of priority. The incumbent uses established procedures to complete tasks.Diagnoses problems with machines or systems, proceeds with necessary repairs to complete the job. Works independently and determines the most efficient manner of proceeding. Errors in judgment may not be detected until they have caused noticeable costs in time and money.May check and approve work of B Electricians and instruct and train others in method and procedures concerning machines and equipment.Education:No Degree RequiredExperience:1-4 yearsQualifications:Trade school background, and/or four-year apprenticeship. Extensive knowledge of Electrical Safety Codes. A valid Minnesota Class A Master, Class A Journeyman and/or Maintenance Electricians license is required. Must complete respirator training.Must possess own tools APPLY NOW!!! JOBS ARE DISAPPEARING FAST.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $16.50 per hour
      • 6:00 AM - 4:30 PM
      Under limited supervision, the receiver is responsible for receiving incoming shipments of merchandise and othermaterials and outgoing shipments along with records and files.Responsibilities:-Operate stand up forklift-Shipping and Receiving-Verify the accuracy of shipments against bills of lading, invoices or other records; checks for shortages andrejects damaged goods. Routes merchandise and materials to proper departments and maintains as necessary. -Place parts and inbound materials into stock and delivers to specified departments.-Confirms quantity and places parts into inventory.-Conducts cycle counts and continuous inventory audits. Receives all purchased materials and/or expense itemsinto database. -Perform transactions daily to assist on-line supplier reporting by purchasing department. Initiation of non-conformance process, when needed.-Loads outbound containers; maintains all necessary warehouse and shipping/receiving documentation. Drivefor pick-ups and deliveries.-Operates all warehouse material handling equipment including stand up forklift. Rotates stock as required.-Performs other duties as assigned.Working hours: 6:00 AM - 4:30 PMSkills:-Forklift operating and driving-Manufacturing environment-Shipping and receivingEducation:High SchoolExperience:1-4 yearsQualifications:Required:-At least 1 year of experience in a similar position-Forklift driving and operating experience-Valid Drivers LicensePreferred:-High School Diploma or equivalent-Two plus years of experience in similar position-Familiarity with MRP or other compatible manufacturing software ? Oracle knowledge is a plus.-Familiar with Microsoft Office Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Under limited supervision, the receiver is responsible for receiving incoming shipments of merchandise and othermaterials and outgoing shipments along with records and files.Responsibilities:-Operate stand up forklift-Shipping and Receiving-Verify the accuracy of shipments against bills of lading, invoices or other records; checks for shortages andrejects damaged goods. Routes merchandise and materials to proper departments and maintains as necessary. -Place parts and inbound materials into stock and delivers to specified departments.-Confirms quantity and places parts into inventory.-Conducts cycle counts and continuous inventory audits. Receives all purchased materials and/or expense itemsinto database. -Perform transactions daily to assist on-line supplier reporting by purchasing department. Initiation of non-conformance process, when needed.-Loads outbound containers; maintains all necessary warehouse and shipping/receiving documentation. Drivefor pick-ups and deliveries.-Operates all warehouse material handling equipment including stand up forklift. Rotates stock as required.-Performs other duties as assigned.Working hours: 6:00 AM - 4:30 PMSkills:-Forklift operating and driving-Manufacturing environment-Shipping and receivingEducation:High SchoolExperience:1-4 yearsQualifications:Required:-At least 1 year of experience in a similar position-Forklift driving and operating experience-Valid Drivers LicensePreferred:-High School Diploma or equivalent-Two plus years of experience in similar position-Familiarity with MRP or other compatible manufacturing software ? Oracle knowledge is a plus.-Familiar with Microsoft Office Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Moorhead, Minnesota
      • Permanent
      • $90,000 - $110,000 per year
      • Various Shifts Available
      Spherion Staffing is searching for a well-qualified Industrial Sales Manager to oversee the sales function of assigned business units, while providing work in client relationship management, business and revenue generation and analytics. Interested candidates should have a Bachelor's degree and 7-10 years of heavy industrial sales or construction sales (required), with a minimum of 3-5 years of supervisory experience.Salary: $90k-110k base plus annual bonus incentive based on exceeding established goalsResponsibilities:- Provide leadership, direction and oversight of a sales team (manages team of 4 sales reps and 1 inside sales coordinator)- Demonstrate a commitment to communicating, improving and adhering to safety policies in all work areas- Responsible for client interface and presentations as well as management of all current and new projects- Responsible for client retention and identification of new revenue streams- Account development of existing client relationships and ensure a smooth creation, execution, assessment and ongoing enhancement of client's needs.- Maintain market information related to competition, future opportunities and market trends in business units.- Create clear business strategy for key accounts (e.g. increase share, account penetration, protect existing base)- Promote the use of Company products in the sales territory- Provide operational guidance and issue resolution for client business- Track and manage of major sales opportunities as they progress through the selling processEstablish annual budgets for marketing and sales expenses and enforce budgetary controls- Represent company in industry organizations including participating actively in trade associations- Interact with credit and billing to ensure accurate invoicing and appropriate accounts receivable- Provide assistance to Credit Manager and work with internal team to ensure collection targets are met- Work to protect company's receivables on all contracts to limit bad debt exposure- Other duties as assignedResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Bachelor's degree is required-Minimum of 7-10 years of heavy industrial sales or construction sales is required, with a minimum of 3-5 years of supervisory experience-Persuasion, communication and negotiating skills are essential-Valid Driver's license and clean driving record is required-Must be proficient with Microsoft Office programs, CRM experience such as Salesforce is required-SAP experience is preferredEducation:BachelorsExperience:7-10 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Karen Witzel at 701-298-8300Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is searching for a well-qualified Industrial Sales Manager to oversee the sales function of assigned business units, while providing work in client relationship management, business and revenue generation and analytics. Interested candidates should have a Bachelor's degree and 7-10 years of heavy industrial sales or construction sales (required), with a minimum of 3-5 years of supervisory experience.Salary: $90k-110k base plus annual bonus incentive based on exceeding established goalsResponsibilities:- Provide leadership, direction and oversight of a sales team (manages team of 4 sales reps and 1 inside sales coordinator)- Demonstrate a commitment to communicating, improving and adhering to safety policies in all work areas- Responsible for client interface and presentations as well as management of all current and new projects- Responsible for client retention and identification of new revenue streams- Account development of existing client relationships and ensure a smooth creation, execution, assessment and ongoing enhancement of client's needs.- Maintain market information related to competition, future opportunities and market trends in business units.- Create clear business strategy for key accounts (e.g. increase share, account penetration, protect existing base)- Promote the use of Company products in the sales territory- Provide operational guidance and issue resolution for client business- Track and manage of major sales opportunities as they progress through the selling processEstablish annual budgets for marketing and sales expenses and enforce budgetary controls- Represent company in industry organizations including participating actively in trade associations- Interact with credit and billing to ensure accurate invoicing and appropriate accounts receivable- Provide assistance to Credit Manager and work with internal team to ensure collection targets are met- Work to protect company's receivables on all contracts to limit bad debt exposure- Other duties as assignedResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Bachelor's degree is required-Minimum of 7-10 years of heavy industrial sales or construction sales is required, with a minimum of 3-5 years of supervisory experience-Persuasion, communication and negotiating skills are essential-Valid Driver's license and clean driving record is required-Must be proficient with Microsoft Office programs, CRM experience such as Salesforce is required-SAP experience is preferredEducation:BachelorsExperience:7-10 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Karen Witzel at 701-298-8300Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 8:00 PM - 6:30 AM
      Performs assembly of mechanical and electromechanical component parts and or/upholstered parts.-Assembler hours are Monday through Thursday: 8:00 PM until 6:30 AM. Overtime on Fridays.Responsibilities:-Assembles various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.-Analyzes rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.-Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.-Maintains a safe and clean working environment.-Perform other duties as assigned.Working hours: 8:00 PM - 6:30 AMSkills:-Mechanical Aptitude-Understanding of SafetyEducation:High SchoolExperience:0-1 yearsQualifications:-High School Diploma or Equivalent-Previous experience in a manufacturing environment-Ability to read blueprints-Experience with hand tools Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Performs assembly of mechanical and electromechanical component parts and or/upholstered parts.-Assembler hours are Monday through Thursday: 8:00 PM until 6:30 AM. Overtime on Fridays.Responsibilities:-Assembles various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.-Analyzes rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.-Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.-Maintains a safe and clean working environment.-Perform other duties as assigned.Working hours: 8:00 PM - 6:30 AMSkills:-Mechanical Aptitude-Understanding of SafetyEducation:High SchoolExperience:0-1 yearsQualifications:-High School Diploma or Equivalent-Previous experience in a manufacturing environment-Ability to read blueprints-Experience with hand tools Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $70,000 - $85,000 per year
      • 8:00 AM - 5:00 PM
      DIRECT HIRE!! Spherion Staffing is partnering with a thriving manufacturer in Mankato for a Senior Accountant role.Responsibilities:Planning, Studying, and collecting data to determine costs of business activity such as raw material purchases, inventory, and labor.Analyzing changes in product design, raw materials, manufacturing methods or services provided, to determine effects on cost.Analyzing actual manufacturing costs and preparing periodic reports comparing standard costs to actual production costs.Audits contracts, orders, and vouchers, and prepares reports to substantiate individual transactions prior to settlement.Determines proper handling of financial transactions and approves transactions within designated limits.Reviews, investigates, and corrects errors and inconsistencies in financial entries, documents, and reports.Makes recommendations regarding the accounting of reserves, assets, and expenditures.Conducts studies and submits recommendations for improving the organization's accounting operation.Maintaining accounts receivable, document bills and supporting documentationUpdating financial records via accounting softwarePreparing quarterly budget under the purview of senior managementAnalyzing financial statements and prepare balance sheetMonth end, quarter end, year-end closing tasksActual versus budget, forecast and trend analysisAssist with various ad hoc projects, as needed by the finance teamWorking hours: 8:00 AM - 5:00 PMSkills:Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.High level Microsoft Excel skills, experience with formulas and pivot tables.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to write reports, business correspondence, and procedure manuals.Education:BachelorsExperience:4-7 yearsQualifications:Bachelor's degree required. CPA require CMA preferredMinimum 5-7 years; accounting experience.Minimum of 2-3 years' previous cost accounting experience is desired.Experience in a Manufacturing Environment. Apply for this position TODAY! Call Jennifer at 507-432-2430.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      DIRECT HIRE!! Spherion Staffing is partnering with a thriving manufacturer in Mankato for a Senior Accountant role.Responsibilities:Planning, Studying, and collecting data to determine costs of business activity such as raw material purchases, inventory, and labor.Analyzing changes in product design, raw materials, manufacturing methods or services provided, to determine effects on cost.Analyzing actual manufacturing costs and preparing periodic reports comparing standard costs to actual production costs.Audits contracts, orders, and vouchers, and prepares reports to substantiate individual transactions prior to settlement.Determines proper handling of financial transactions and approves transactions within designated limits.Reviews, investigates, and corrects errors and inconsistencies in financial entries, documents, and reports.Makes recommendations regarding the accounting of reserves, assets, and expenditures.Conducts studies and submits recommendations for improving the organization's accounting operation.Maintaining accounts receivable, document bills and supporting documentationUpdating financial records via accounting softwarePreparing quarterly budget under the purview of senior managementAnalyzing financial statements and prepare balance sheetMonth end, quarter end, year-end closing tasksActual versus budget, forecast and trend analysisAssist with various ad hoc projects, as needed by the finance teamWorking hours: 8:00 AM - 5:00 PMSkills:Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.High level Microsoft Excel skills, experience with formulas and pivot tables.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to write reports, business correspondence, and procedure manuals.Education:BachelorsExperience:4-7 yearsQualifications:Bachelor's degree required. CPA require CMA preferredMinimum 5-7 years; accounting experience.Minimum of 2-3 years' previous cost accounting experience is desired.Experience in a Manufacturing Environment. Apply for this position TODAY! Call Jennifer at 507-432-2430.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Perham, Minnesota
      • Temporary
      • $16.00 per hour
      • Various Shifts Available
      Spherion Staffing is hiring for motivated individuals between the ages of 21-25 to serve as a mystery shopper to locations who sell tobacco and alcohol products. You will be responsible for monitoring if store employees are asking for ID when necessary. Successful applicants should be reliable and self motivated.Responsibilities:-Follow a planned route-Monitor/Audit store and personnel for compliance-Record dataWorking hours: Various Shifts AvailableSkills:-Ability to follow written instructions -Ability to be detailed and accurate-Must be self-motivatedEducation:High SchoolExperience:0-1 yearsQualifications:-Eligible candidates must be between the ages of 21-25-Valid Driver's License and personal vehicle To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is hiring for motivated individuals between the ages of 21-25 to serve as a mystery shopper to locations who sell tobacco and alcohol products. You will be responsible for monitoring if store employees are asking for ID when necessary. Successful applicants should be reliable and self motivated.Responsibilities:-Follow a planned route-Monitor/Audit store and personnel for compliance-Record dataWorking hours: Various Shifts AvailableSkills:-Ability to follow written instructions -Ability to be detailed and accurate-Must be self-motivatedEducation:High SchoolExperience:0-1 yearsQualifications:-Eligible candidates must be between the ages of 21-25-Valid Driver's License and personal vehicle To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Detroit Lakes, Minnesota
      • Temporary
      • $16.00 - $18.00 per hour
      • Various Shifts Available
      Do you like working with your hands? Are you seeking a career opportunity with a growing company? Spherion Staffing is currently seeking Assemblers to work at a client location in Detroit Lakes, MN. Schedule is flexible and you have the ability to set your own hours!Responsibilities:- Assemble components to build float switches, control panels, printed circuit boards, and tank alarms- Work with tools, machines, robots, and automation equipment- Inspect and qc products according to work instructions- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Hand dexterityEducation:High SchoolExperience:0-1 yearsQualifications:- Ability to lift up to 50 lbs- Ability to stand for long periods of timeSchedule:Flexible scheduling. Set your own hours between 5 am - 3:15 am Mon - Thurs, 5:30 am - 6 pm Fri - Sun.OT is optional To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Do you like working with your hands? Are you seeking a career opportunity with a growing company? Spherion Staffing is currently seeking Assemblers to work at a client location in Detroit Lakes, MN. Schedule is flexible and you have the ability to set your own hours!Responsibilities:- Assemble components to build float switches, control panels, printed circuit boards, and tank alarms- Work with tools, machines, robots, and automation equipment- Inspect and qc products according to work instructions- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Hand dexterityEducation:High SchoolExperience:0-1 yearsQualifications:- Ability to lift up to 50 lbs- Ability to stand for long periods of timeSchedule:Flexible scheduling. Set your own hours between 5 am - 3:15 am Mon - Thurs, 5:30 am - 6 pm Fri - Sun.OT is optional To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 - $21.00 per hour
      • 6:00 PM - 6:00 PM
      Are you a night owl? Do you know someone who is a night owl, only seeking out work when the sun goes down? We are working with a large manufacturer right here in central Mankato offering full-time positions on nights. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.2 days on, 2 days off, 3 days on, 2 days off, rotating shift - 6PM - 6AM;Responsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 PM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you a night owl? Do you know someone who is a night owl, only seeking out work when the sun goes down? We are working with a large manufacturer right here in central Mankato offering full-time positions on nights. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.2 days on, 2 days off, 3 days on, 2 days off, rotating shift - 6PM - 6AM;Responsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 PM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.00 - $21.00 per hour
      • 6:00 AM - 6:00 PM
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      It would be kind of neat, to know your entire work schedule for the year. How about working 1/3 less days in a year? We are looking for production laborers for our client, right here in Mankato. Primary job task is to remove, count and package product from production line to ship our best product to our customer, ie. gloves, aprons, bibs, boots, tablecovers, table skirts, etc. Maintain a safe and neat work environment, and any other duties as assigned by supervisor.1 months days; 6AM-6PM and then 1 month nights 6PM-6AMResponsibilities:Pulls and packages converted product (i.e., gloves, aprons, etc.) in accordance with Company procedures and Customer specifications.Checks converted product for product quality and required specifications.Packaging and marking proper products, identifying proper equipment such as packaging and film.Makes minor mechanical adjustments and film laydown on converting equipment to assure quality production.Operates glove machines, apron sheeters, apron press or bag machine in producing converted product with normal supervision.Cleans equipment and assigned area as tasked.Assures a safe working environment for self and crew membersFills out necessary production reports as tasked.Assists in training new personnel in the absences of lead machine operatorsLearn to operate and maintain all machines. IE. Checking your machine to identify trouble-shooting-wts, belts, springs, basic nuts, wrenching, allen sets. Even up rolls, adjust pickers, setups, changeovers, air adjustments, nip. Adj., adj. rollersObtains materials from inventory when directed and assists in roll changes on equipment when required.Be punctual and polite.Abide by all safety rules and proceduresWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to follow directions, read and understand safety manuals. Willingness to learn a must. Must be accurate, good math and communication skills, and able to interact with all associatesEducation:High SchoolExperience:0-1 yearsQualifications:H.S. graduate or GED required APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $14.00 per hour
      • 6:00 AM - 6:00 PM
      No experience required! We are seeking out part hangers for our client here in Mankato; these positions are offering work on the WEEKEND SHIFT; Friday-Sunday 6AM-6PM. Not only that, these roles are temp-to-hire -- so long-term opportunity. No manufacturing experience needed, just a willingness to learn!Responsibilities:Hangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metHangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metOperates electric or pneumatic hoist to set heavier painted parts on carts in advance of assemblyUses pallet jack or forklift to move parts to storage areasPerforms daily inspections of equipment within area of responsibility to insure all equipment is in safe working orderStrives to meet all established safety, quality, cost, and productivity standardsContinually seeks to improve production methods, equipment performance and overall quality of productAbility to learn a variety of different product linesWorking hours: 6:00 AM - 6:00 PMSkills:Team orientedOrganizedAbility to follow standard work and proceduresGood communication skills (verbal and written)Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience is not required! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      No experience required! We are seeking out part hangers for our client here in Mankato; these positions are offering work on the WEEKEND SHIFT; Friday-Sunday 6AM-6PM. Not only that, these roles are temp-to-hire -- so long-term opportunity. No manufacturing experience needed, just a willingness to learn!Responsibilities:Hangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metHangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metOperates electric or pneumatic hoist to set heavier painted parts on carts in advance of assemblyUses pallet jack or forklift to move parts to storage areasPerforms daily inspections of equipment within area of responsibility to insure all equipment is in safe working orderStrives to meet all established safety, quality, cost, and productivity standardsContinually seeks to improve production methods, equipment performance and overall quality of productAbility to learn a variety of different product linesWorking hours: 6:00 AM - 6:00 PMSkills:Team orientedOrganizedAbility to follow standard work and proceduresGood communication skills (verbal and written)Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience is not required! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fergus Falls, Minnesota
      • Permanent
      • $35,000 - $65,000 per year
      • 8:00 AM - 5:00 PM
      Do you love interacting with people? Are you friendly, outgoing, and motivated to succeed? Spherion Staffing, is hiring for a motivated closing executive officer with a fast-growing title company. The foundation of this client is built on integrity and reliability. Successful applicants should have excellent attention to detail.Responsibilities:Identify and cultivate new referral relationships with agents, builders, lenders, and other potential clients while maintaining strong relationships with our current clients.Prepare and execute closing documents working closely with real estate agents and lendersAssist in creating or maintaining systems to operate at optimum efficiencyMaintain balanced financials and accuracy.Work with pre-closing staff to clear title issuesMeet deadlines in a fast-paced environmentWork well with the team in all locations and work independently to meet personal goals.Working hours: 8:00 AM - 5:00 PMSkills:Candidates should have excellent attention to detail Be efficient at working on multiple files at once Be willing to flex their priorities upon the needs of our business.Education:High SchoolExperience:1-4 yearsQualifications:Motivation to grow with the companyStrong attention to detail and accuracyExcellent communication and customer service skillsProficient computer, software, and typing skillsHigh degree of professionalism To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Do you love interacting with people? Are you friendly, outgoing, and motivated to succeed? Spherion Staffing, is hiring for a motivated closing executive officer with a fast-growing title company. The foundation of this client is built on integrity and reliability. Successful applicants should have excellent attention to detail.Responsibilities:Identify and cultivate new referral relationships with agents, builders, lenders, and other potential clients while maintaining strong relationships with our current clients.Prepare and execute closing documents working closely with real estate agents and lendersAssist in creating or maintaining systems to operate at optimum efficiencyMaintain balanced financials and accuracy.Work with pre-closing staff to clear title issuesMeet deadlines in a fast-paced environmentWork well with the team in all locations and work independently to meet personal goals.Working hours: 8:00 AM - 5:00 PMSkills:Candidates should have excellent attention to detail Be efficient at working on multiple files at once Be willing to flex their priorities upon the needs of our business.Education:High SchoolExperience:1-4 yearsQualifications:Motivation to grow with the companyStrong attention to detail and accuracyExcellent communication and customer service skillsProficient computer, software, and typing skillsHigh degree of professionalism To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 AM - 4:30 PM
      If you are looking to put your mechanical aptitude to the test, we have the perfect opportunity for you; we are looking for assemblers who are comfortable navigating blueprints and using hand tools. This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 6AM - 4:30PM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 6:00 AM - 4:30 PMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      If you are looking to put your mechanical aptitude to the test, we have the perfect opportunity for you; we are looking for assemblers who are comfortable navigating blueprints and using hand tools. This growing company in Mankato would love to utilize your talents and abilities. This is a long term temp to hire position with competitive pay.Monday - Thursday 6AM - 4:30PM; OT on FridaysResponsibilities:These positions need to be able to read blueprints, use hand tools, band saw and other miscellaneous manufacturing related equipment in the assembly process from start to finish. Candidates must understand and comply with Standard Operating Procedures (SOP), quality control, and safety processes.Working hours: 6:00 AM - 4:30 PMSkills:Three years' experience in construction or prefabrication fieldAbility to read and execute on SOP, quality and safety processesAbility to accurately measure with a tape measureAbility to work independentlyAttention to detailGood communication and team skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High school diploma or equivalentAbility to proficiently read and write EnglishAbility to read and understand blueprintsAbility to lift 25-50 pounds frequently DO NOT WAIT; Apply for this position TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    30 of 186 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.