You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    23 jobs found in Owatonna, Minnesota - Page 1

    Filter2
    Clear all
      • Owatonna, Minnesota
      • Permanent
      • $30.00 - $35.00 per hour
      • 6:00 AM - 6:00 PM
      Operate and maintain the boiler generation system, air compressor and fire sprinkler system.Responsibilities:Troubleshoot boiler equipment, dealkalizers system, air compressors, and fire sprinkler systems and make the necessary repairs.Analyze and interpret the chemical composition of the boiler water.Maintain accurate records of boiler operations.Must know how to weld and use a cutting torch. Should have a thorough knowledge of pipe threading and welding. Should know the ratings for SCH 40 and SCH 80 pipe, both black and galvanized.Must have a thorough knowledge of all plant steam generation systems and equipment. Must know how to operate and service all steam heating units and steam water-heating units. Must know how to run all chemical tests necessary to operate the boiler.Ability to keep all boilers operating as plant load dictates, monitor boilers, water levels, check water quantities of softeners and dealkalizers and equipment is working properly.Ability to make necessary repairs in the boiler room as needed and maintain safety / efficiency of the boiler room.Boiler operator will monitor doors and lights when plant is not in operations, also includes fire alarm system during shift.Boiler operator will be assigned to work and assist in the cooker jams, repairs or adjustments.Must possess a complete set of tools for mechanical maintenance.Must be able to work independently on all equipment. Should require no supervision.Must be familiar with standard boiler safety procedures, state laws governing boiler safety, and all company safety policies.Back up to Chief Engineer for on call status.Properly maintain / perform preventive maintenance on all heating ventilation and cooling equipment (HVAC).All boiler operators will adhere to instructions from the assigned boiler chief in charge.Boiler operators may be assigned work duties from their manager or chief in charge.Boiler operators will monitor all air systems and vacuum systems where applicable and make necessary arrangements to maintain an adequate air supply and check for excess moisture in the system and bleed system if needed.Maintain work area in a clean and orderly manner. May perform other duties as assigned by the Supervisor. Adhere to all Lakeside Foods policies and procedures.Notify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Working hours: 6:00 AM - 6:00 PMSkills:Language Skills:--Ability to read and to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: --Ability to apply common sense understanding to carry out instructions furnished in written and oral, or diagram form.--Ability to deal with problems involving several concrete variables in standardized situations.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and Lakeside as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand; walk; use hands and fingers to handle or feel objects, tools, or controls and reach with hands and arms. --The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.--The employee must regularly lift and/or move up to 50 po
      Operate and maintain the boiler generation system, air compressor and fire sprinkler system.Responsibilities:Troubleshoot boiler equipment, dealkalizers system, air compressors, and fire sprinkler systems and make the necessary repairs.Analyze and interpret the chemical composition of the boiler water.Maintain accurate records of boiler operations.Must know how to weld and use a cutting torch. Should have a thorough knowledge of pipe threading and welding. Should know the ratings for SCH 40 and SCH 80 pipe, both black and galvanized.Must have a thorough knowledge of all plant steam generation systems and equipment. Must know how to operate and service all steam heating units and steam water-heating units. Must know how to run all chemical tests necessary to operate the boiler.Ability to keep all boilers operating as plant load dictates, monitor boilers, water levels, check water quantities of softeners and dealkalizers and equipment is working properly.Ability to make necessary repairs in the boiler room as needed and maintain safety / efficiency of the boiler room.Boiler operator will monitor doors and lights when plant is not in operations, also includes fire alarm system during shift.Boiler operator will be assigned to work and assist in the cooker jams, repairs or adjustments.Must possess a complete set of tools for mechanical maintenance.Must be able to work independently on all equipment. Should require no supervision.Must be familiar with standard boiler safety procedures, state laws governing boiler safety, and all company safety policies.Back up to Chief Engineer for on call status.Properly maintain / perform preventive maintenance on all heating ventilation and cooling equipment (HVAC).All boiler operators will adhere to instructions from the assigned boiler chief in charge.Boiler operators may be assigned work duties from their manager or chief in charge.Boiler operators will monitor all air systems and vacuum systems where applicable and make necessary arrangements to maintain an adequate air supply and check for excess moisture in the system and bleed system if needed.Maintain work area in a clean and orderly manner. May perform other duties as assigned by the Supervisor. Adhere to all Lakeside Foods policies and procedures.Notify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Working hours: 6:00 AM - 6:00 PMSkills:Language Skills:--Ability to read and to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: --Ability to apply common sense understanding to carry out instructions furnished in written and oral, or diagram form.--Ability to deal with problems involving several concrete variables in standardized situations.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and Lakeside as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand; walk; use hands and fingers to handle or feel objects, tools, or controls and reach with hands and arms. --The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.--The employee must regularly lift and/or move up to 50 po
      • Owatonna, Minnesota
      • Permanent
      • $20.05 - $23.00 per hour
      • 6:00 AM - 6:00 PM
      Repair and maintain a variety of machinery equipment located within the main plant. Demonstrate a steady, upward progression of skills and ability to do increasingly difficult tasks, the abilities will include but not be limited to the following:Responsibilities:Assist with the efficient flow of product through the assigned area and the major repair and maintenance of all machinery in the assigned area.Work with seasonal employees in their day ? to ? day dutiesHandle minor personnel problems. Refer major problems to the Supervisor / Operation MangerIn the off season, will be involved in any number of maintenance activities including machine repair/overhaul, cleaning, building walkways and work platforms, and assisting in the installation of new processing equipment.Must possess a complete set of tools for industrial maintenance.Must have general knowledge of gas and arc welding, how to cut and thread pipe, bolt and thread sizes, how to fasten pulleys and sprockets on shafts and how to adjust conveyors.Experience with hydraulics and pneumaticsAbility to read precision instruments and blue prints Ability to order parts, communicate with the suppliers and service reps from equipment companies.Maintain work area in a clean and orderly manner.May perform other duties as assigned by the SupervisorAdhere to all Company policies and proceduresNotify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Ability to fabricate equipment / ability to use basic shop mathWorking hours: 6:00 AM - 6:00 PMSkills:Knowledge:-One year related experience and / or trainingLanguage Skills:-Ability to read, write and speak EnglishReasoning Ability:-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.TEAMWORK:-Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or general education degree (GED)While performing the duties of this job, the employee is regularly required to: stand, walk, use hands and fingers to handle, feel objects, tools, or controls and reach with hands and arms.The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and / or move up to 50-75 pounds.WORK ENVIRONMENT:While performing the duties of this job, the employee occasionally works near moving mechanical parts.The noise level in the work environment is usually high. Direct Hire opportunity with a reputable company! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Repair and maintain a variety of machinery equipment located within the main plant. Demonstrate a steady, upward progression of skills and ability to do increasingly difficult tasks, the abilities will include but not be limited to the following:Responsibilities:Assist with the efficient flow of product through the assigned area and the major repair and maintenance of all machinery in the assigned area.Work with seasonal employees in their day ? to ? day dutiesHandle minor personnel problems. Refer major problems to the Supervisor / Operation MangerIn the off season, will be involved in any number of maintenance activities including machine repair/overhaul, cleaning, building walkways and work platforms, and assisting in the installation of new processing equipment.Must possess a complete set of tools for industrial maintenance.Must have general knowledge of gas and arc welding, how to cut and thread pipe, bolt and thread sizes, how to fasten pulleys and sprockets on shafts and how to adjust conveyors.Experience with hydraulics and pneumaticsAbility to read precision instruments and blue prints Ability to order parts, communicate with the suppliers and service reps from equipment companies.Maintain work area in a clean and orderly manner.May perform other duties as assigned by the SupervisorAdhere to all Company policies and proceduresNotify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Ability to fabricate equipment / ability to use basic shop mathWorking hours: 6:00 AM - 6:00 PMSkills:Knowledge:-One year related experience and / or trainingLanguage Skills:-Ability to read, write and speak EnglishReasoning Ability:-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.TEAMWORK:-Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or general education degree (GED)While performing the duties of this job, the employee is regularly required to: stand, walk, use hands and fingers to handle, feel objects, tools, or controls and reach with hands and arms.The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and / or move up to 50-75 pounds.WORK ENVIRONMENT:While performing the duties of this job, the employee occasionally works near moving mechanical parts.The noise level in the work environment is usually high. Direct Hire opportunity with a reputable company! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $18.50 per hour
      • 3:30 PM - 2:00 AM (Various Shifts Available)
      Performing a variety of functions involved with shipping, receiving, and storage of parts, materials, and products.Responsibilities:-Preparing parts/materials for shipment, packing materials, verifying materials and quantities, maintaining inventory, verifying stock counts, moving parts and materials to proper areas.-Operating a variety of motorized and hand-powered material handling equipment as well as scales, postage meters, conveyor systems.-Job duties require the use of arithmetic, reading, writing, and measuring equipment.-Applicants must have good interpersonal and conflict resolution skills.-Applicants must be able and willing to support different areas and functions within the warehouse as business requires.Working hours: 3:30 PM - 2:00 AM (Various Shifts Available)Skills:-Ability to use computer terminals.-Maintains a variety of records pertaining to shipping, receiving, unloading trucks.-Performing work from printed order copies as well as various other written and verbal instructions.Education:High SchoolExperience:0-1 yearsQualifications:-A high school diploma or GED is required.-Forklift experience preferred.-Ability to use computer terminals. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Performing a variety of functions involved with shipping, receiving, and storage of parts, materials, and products.Responsibilities:-Preparing parts/materials for shipment, packing materials, verifying materials and quantities, maintaining inventory, verifying stock counts, moving parts and materials to proper areas.-Operating a variety of motorized and hand-powered material handling equipment as well as scales, postage meters, conveyor systems.-Job duties require the use of arithmetic, reading, writing, and measuring equipment.-Applicants must have good interpersonal and conflict resolution skills.-Applicants must be able and willing to support different areas and functions within the warehouse as business requires.Working hours: 3:30 PM - 2:00 AM (Various Shifts Available)Skills:-Ability to use computer terminals.-Maintains a variety of records pertaining to shipping, receiving, unloading trucks.-Performing work from printed order copies as well as various other written and verbal instructions.Education:High SchoolExperience:0-1 yearsQualifications:-A high school diploma or GED is required.-Forklift experience preferred.-Ability to use computer terminals. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $65.00 - $74.00 per hour
      • 8:00 AM - 4:30 PM
      Do you want beneficial technologies being shaped by your ideas? Whether in the areas of mobility solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the change to improve quality of life all across the globe.Responsibilities:This is project-based work expected to complete within 6-months.Working hours: 8:00 AM - 4:30 PMSkills:Deliverables:Yocto LinuxConfiguration for development boardConfiguration for new custom boardBase images for each boardSource and documentationU-BootImage for custom boardBoot configurationSource and documentationBaseline applicationInitial application framework in CIntegrated into Yocto imageSource and documentation for extendingJenkins buildAutomated build for the applicationAutomated build for final product image with applicationBuild files and documentationLinux applicationUSB and WIFI communication interfacesSupporting device drivers if necessarySource and necessary documentationEducation:No Degree RequiredExperience:1-4 yearsQualifications:Yocto LinuxC/C++CMAKELinux device drivers developmentLinux application developmentJenkins Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Do you want beneficial technologies being shaped by your ideas? Whether in the areas of mobility solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the change to improve quality of life all across the globe.Responsibilities:This is project-based work expected to complete within 6-months.Working hours: 8:00 AM - 4:30 PMSkills:Deliverables:Yocto LinuxConfiguration for development boardConfiguration for new custom boardBase images for each boardSource and documentationU-BootImage for custom boardBoot configurationSource and documentationBaseline applicationInitial application framework in CIntegrated into Yocto imageSource and documentation for extendingJenkins buildAutomated build for the applicationAutomated build for final product image with applicationBuild files and documentationLinux applicationUSB and WIFI communication interfacesSupporting device drivers if necessarySource and necessary documentationEducation:No Degree RequiredExperience:1-4 yearsQualifications:Yocto LinuxC/C++CMAKELinux device drivers developmentLinux application developmentJenkins Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $70,000 - $105,000 per year
      • 8:00 AM - 4:30 PM
      As a Senior Engineering Project Manager, you will manage projects for our North American Advanced Driver Assistance Systems (ADAS) team. This will include scope/requirements gathering, work breakdown, schedule, project cost estimation, and project risk mitigation. Your focus will be on the development and release of ADAS solutions / equipment for the North American Automotive Service Solutions industry.Responsibilities:North American (NA) engineering representation in global ADAS Core TeamMember of the global ADAS Technical TeamSteering the NA regional strategy for innovation and adaptations of EMEA solutionsResponsible for the overall NA regional projects and project plansRequirements Development with NA regional marketingProject planning and preparation (staffing, scope, tools)Project kickoff and tracking (Progress, Budget, Risks)Monthly reporting in regional and global Project ReviewsIndustrialization support for ADAS products in NACoordination of regional ADAS releasesOne Voice to region NA in respect of ADASInput and influence into the next 12 month business planAlignment within global ADAS Core TeamWorking hours: 8:00 AM - 4:30 PM - Work from home 3 days a week!Skills:Cross-functional leadership experience consisting of engineering, marketing, purchasing, manufacturing, customer support and any other functions needed to develop and successfully launch a new product to the marketDemonstrated effectiveness in alignment of product, market, customer and business needs in planning and running the projectsDemonstrated effectiveness using waterfall and Agile methodologiesFunctional knowledge and experience using Enterprise Resource Planning (ERP) / Manufacturing Resource Planning (MRP) systemsEducation:BachelorsExperience:4-7 yearsQualifications:Bachelor's Degree in engineering or equivalent relevant experience required5+ years' experience in project management / engineering leadership for product development projectsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      As a Senior Engineering Project Manager, you will manage projects for our North American Advanced Driver Assistance Systems (ADAS) team. This will include scope/requirements gathering, work breakdown, schedule, project cost estimation, and project risk mitigation. Your focus will be on the development and release of ADAS solutions / equipment for the North American Automotive Service Solutions industry.Responsibilities:North American (NA) engineering representation in global ADAS Core TeamMember of the global ADAS Technical TeamSteering the NA regional strategy for innovation and adaptations of EMEA solutionsResponsible for the overall NA regional projects and project plansRequirements Development with NA regional marketingProject planning and preparation (staffing, scope, tools)Project kickoff and tracking (Progress, Budget, Risks)Monthly reporting in regional and global Project ReviewsIndustrialization support for ADAS products in NACoordination of regional ADAS releasesOne Voice to region NA in respect of ADASInput and influence into the next 12 month business planAlignment within global ADAS Core TeamWorking hours: 8:00 AM - 4:30 PM - Work from home 3 days a week!Skills:Cross-functional leadership experience consisting of engineering, marketing, purchasing, manufacturing, customer support and any other functions needed to develop and successfully launch a new product to the marketDemonstrated effectiveness in alignment of product, market, customer and business needs in planning and running the projectsDemonstrated effectiveness using waterfall and Agile methodologiesFunctional knowledge and experience using Enterprise Resource Planning (ERP) / Manufacturing Resource Planning (MRP) systemsEducation:BachelorsExperience:4-7 yearsQualifications:Bachelor's Degree in engineering or equivalent relevant experience required5+ years' experience in project management / engineering leadership for product development projectsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $19.50 per hour
      • 8:00 PM - 6:30 AM
      A great, reputable company in Owatonna, MN is looking for entry level production assembly workers. New higher wages! Start immediately and weekly pay! Great facility and on site fitness center!ASSEMBLER HOURS ARE MONDAY THROUGH THURSDAY: 8 PM UNTIL 6:30 AM. OVERTIME IS DONE ON FRIDAYS.Job Purpose:Performs production assembly of mechanical and electromechanical component parts and or/upholstered parts.Responsibilities:-Production assembly workers assemble various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.-The assembler will analyze rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.-Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.-Maintains a safe and clean working environment.-Perform other duties as assigned.Working hours: 8:00 PM - 6:30 AMSkills:Mechanical skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Mechanical aptitude-Understanding of safety-Ability to stand entire shift and lift up to 50lbsPreferred-High School Diploma or equivalent-Previous experience in production environment -Previous experience in assembly-Ability to read blueprints-Experience with hand tools Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A great, reputable company in Owatonna, MN is looking for entry level production assembly workers. New higher wages! Start immediately and weekly pay! Great facility and on site fitness center!ASSEMBLER HOURS ARE MONDAY THROUGH THURSDAY: 8 PM UNTIL 6:30 AM. OVERTIME IS DONE ON FRIDAYS.Job Purpose:Performs production assembly of mechanical and electromechanical component parts and or/upholstered parts.Responsibilities:-Production assembly workers assemble various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.-The assembler will analyze rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.-Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.-Maintains a safe and clean working environment.-Perform other duties as assigned.Working hours: 8:00 PM - 6:30 AMSkills:Mechanical skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Mechanical aptitude-Understanding of safety-Ability to stand entire shift and lift up to 50lbsPreferred-High School Diploma or equivalent-Previous experience in production environment -Previous experience in assembly-Ability to read blueprints-Experience with hand tools Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $20.00 per hour
      • 8:00 AM - 12:00 PM
      This is a part-time position needed for up to 90-days. Flexible schedule available for an average of 16-18 hours per week.Responsibilities:Create and maintain presentations, spreadsheets, charts, reports and databasesRead, research, route department correspondence, meeting requests and other time commitmentsCoordinate department meetings and events on behalf of the teamMaintain department files and recordsResponsible for various functions within the departmentPerfor other essential and related duties as neededWorking hours: 8:00 AM - 12:00 PMSkills:Strong organizational, planning and prioritization skills requiredMust be able to accommodate quick changes in work priorities and schedulesComfortable working with sensitive/confidential informationEducation:No Degree RequiredExperience:0-1 yearsQualifications:Effective communication skills (verbal and written) requiredAdvanced experience in MS Office Contact us today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is a part-time position needed for up to 90-days. Flexible schedule available for an average of 16-18 hours per week.Responsibilities:Create and maintain presentations, spreadsheets, charts, reports and databasesRead, research, route department correspondence, meeting requests and other time commitmentsCoordinate department meetings and events on behalf of the teamMaintain department files and recordsResponsible for various functions within the departmentPerfor other essential and related duties as neededWorking hours: 8:00 AM - 12:00 PMSkills:Strong organizational, planning and prioritization skills requiredMust be able to accommodate quick changes in work priorities and schedulesComfortable working with sensitive/confidential informationEducation:No Degree RequiredExperience:0-1 yearsQualifications:Effective communication skills (verbal and written) requiredAdvanced experience in MS Office Contact us today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $50,000 - $60,000 per year
      • 8:00 AM - 5:00 PM
      We are looking for an exacting individual to develop purchasing strategies, negotiate with suppliers and maintain critical relationships. This role is crucial to the success of our growing company.This kind company has been offering high-quality, custom cabinetry to clients and builders throughout southern Minnesota and the Twin Cities for 46 years. Join this thriving, family-owned business and work with an amazing team of individuals.Responsibilities:???Develop and negotiate agreements and supply contracts???Develop and manage supplier/vendor relationships???Assessing market pricing and availability ???Source materials and supplies while meeting quality requirements, cost savings goals and inventory management needs???All aspects of inventory monitoring and management: tracking, receiving, restocking???Maintaining an accurate inventory system???Estimating Cabinetry Projects???Other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:We believe we accomplish more together than alone. We are looking for individuals who fit our Core Values:Approachable and ResourcefulDrivenWork as a TeamCraftsmanshipSolution DrivenEducation:BachelorsExperience:1-4 yearsQualifications:???Bachelor???s degree in business, accounting, supply chain management or related field???5+ years experience in purchasing role???Excellent networking and relationship-building skills???Research and analytical capabilities ???Great communication skills, verbal and written Direct Hire position with a kind family owned and operated business! Benefits???Health insurance- company pays 100% of employee-only premium on lowest cost plan???Paid vacation???Paid holidays???Paid sick leave???401kSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for an exacting individual to develop purchasing strategies, negotiate with suppliers and maintain critical relationships. This role is crucial to the success of our growing company.This kind company has been offering high-quality, custom cabinetry to clients and builders throughout southern Minnesota and the Twin Cities for 46 years. Join this thriving, family-owned business and work with an amazing team of individuals.Responsibilities:???Develop and negotiate agreements and supply contracts???Develop and manage supplier/vendor relationships???Assessing market pricing and availability ???Source materials and supplies while meeting quality requirements, cost savings goals and inventory management needs???All aspects of inventory monitoring and management: tracking, receiving, restocking???Maintaining an accurate inventory system???Estimating Cabinetry Projects???Other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:We believe we accomplish more together than alone. We are looking for individuals who fit our Core Values:Approachable and ResourcefulDrivenWork as a TeamCraftsmanshipSolution DrivenEducation:BachelorsExperience:1-4 yearsQualifications:???Bachelor???s degree in business, accounting, supply chain management or related field???5+ years experience in purchasing role???Excellent networking and relationship-building skills???Research and analytical capabilities ???Great communication skills, verbal and written Direct Hire position with a kind family owned and operated business! Benefits???Health insurance- company pays 100% of employee-only premium on lowest cost plan???Paid vacation???Paid holidays???Paid sick leave???401kSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $70,000 - $90,000 per year
      • 5:00 AM - 4:00 PM
      Work for a leading manufacturer and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! This experienced Production Manager will lead and motivate a team of production team members to achieve a safe work environment and the efficient running of our operations. This role will execute upon the manufacturing plan by utilizing available resources, labor, materials, support, and capital to optimize production. In this position you would emphasize improved safety, higher quality, lower cost, and better delivery by developing improved product flow, production / inventory / capacity planning, process reliability, waste elimination, and individual / organizational development consistent with the strategic plan.Responsibilities:-Ensuring timely completion of work and advising the organization of departmental status including equipment problems, process problems, and employee performance issues-Managing labor resources to ensure that an appropriate quantity and skill level are available through selection, training, and personnel development-Supporting daily continuous process improvement and waste elimination to enhance our competitive edge through maintaining Gemba board metrics / Paretos and identifying and leading improvements in the areas of responsibility-Improving safety performance by maintaining safety system compliance and 5S realization-Leading team to comply with ISO certification requirements and guarantee quality system conformance-Driving machine reliability by ensuring the preventative maintenance system is executed and maintained-Improving inventory performance with best practices and implementing reliable inventory systems-Supporting development of annual budgets and executing plans to meet the productivity goal of the organization-Managing key projects to fulfill strategic objectives-Supporting product teams with improving products and processes to increase customer satisfaction and profitabilityWorking hours: 5:00 AM - 4:00 PMSkills:--Proven commitment to change and continuous improvement--Ability to communicate verbally and in written form--Analytical and problem-solving ability--Proven ability to motivate teams and manage conflict--Computer skills (business system, email, spreadsheet and word processing)--Experience with ERP systems and product flow--Ability to read and interpret prints, drawings, and layoutsEducation:BachelorsExperience:1-4 yearsQualifications:-Bachelor or Associate degree (bachelor???s preferred); equivalent leadership experience will be considered in lieu of degree-Three to five (3-5) years proven manufacturing experience-Three (3) years management or leadership experience-Experience in lean manufacturing environment Direct Hire position! Work for a leading manufacturer, and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! Benefit offerings include:-Paid Time Off-9 Paid Holidays-Generous Profit Sharing-Medical, Dental and Vision Insurance-Spending Accounts ??? HSA, FSA, DCFSA-Company Paid Short-term and Long-term Disability Insurance-401k Retirement Plan with Company Match-Company Paid Life Insurance-Supplemental Life Insurance-Tuition Assistance Program-Onsite Fitness Center-Employee Assistance Program-Short-term Incentive PlanSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and
      Work for a leading manufacturer and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! This experienced Production Manager will lead and motivate a team of production team members to achieve a safe work environment and the efficient running of our operations. This role will execute upon the manufacturing plan by utilizing available resources, labor, materials, support, and capital to optimize production. In this position you would emphasize improved safety, higher quality, lower cost, and better delivery by developing improved product flow, production / inventory / capacity planning, process reliability, waste elimination, and individual / organizational development consistent with the strategic plan.Responsibilities:-Ensuring timely completion of work and advising the organization of departmental status including equipment problems, process problems, and employee performance issues-Managing labor resources to ensure that an appropriate quantity and skill level are available through selection, training, and personnel development-Supporting daily continuous process improvement and waste elimination to enhance our competitive edge through maintaining Gemba board metrics / Paretos and identifying and leading improvements in the areas of responsibility-Improving safety performance by maintaining safety system compliance and 5S realization-Leading team to comply with ISO certification requirements and guarantee quality system conformance-Driving machine reliability by ensuring the preventative maintenance system is executed and maintained-Improving inventory performance with best practices and implementing reliable inventory systems-Supporting development of annual budgets and executing plans to meet the productivity goal of the organization-Managing key projects to fulfill strategic objectives-Supporting product teams with improving products and processes to increase customer satisfaction and profitabilityWorking hours: 5:00 AM - 4:00 PMSkills:--Proven commitment to change and continuous improvement--Ability to communicate verbally and in written form--Analytical and problem-solving ability--Proven ability to motivate teams and manage conflict--Computer skills (business system, email, spreadsheet and word processing)--Experience with ERP systems and product flow--Ability to read and interpret prints, drawings, and layoutsEducation:BachelorsExperience:1-4 yearsQualifications:-Bachelor or Associate degree (bachelor???s preferred); equivalent leadership experience will be considered in lieu of degree-Three to five (3-5) years proven manufacturing experience-Three (3) years management or leadership experience-Experience in lean manufacturing environment Direct Hire position! Work for a leading manufacturer, and international market leader of 550+ employees, that is family owned with a small company culture where your voice is heard, your name is known, and your impact is felt! Benefit offerings include:-Paid Time Off-9 Paid Holidays-Generous Profit Sharing-Medical, Dental and Vision Insurance-Spending Accounts ??? HSA, FSA, DCFSA-Company Paid Short-term and Long-term Disability Insurance-401k Retirement Plan with Company Match-Company Paid Life Insurance-Supplemental Life Insurance-Tuition Assistance Program-Onsite Fitness Center-Employee Assistance Program-Short-term Incentive PlanSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and
      • Owatonna, Minnesota
      • Permanent
      • $18.00 - $22.00 per hour
      • 5:00 AM - 4:00 PM (Various Shifts Available)
      TOURING TUESDAYS - HIRING EVENT!!MAY 24TH, 2022Hiring Event Schedule   2:00 PM - 6:00 PMBenefitsSign-on BonusesYear-end cash bonusPerformance and wage review after 90 days of employmentPaid HolidaysPTOSafety equipment reimbursementProfit-sharing and 401K ContributionsMedical, Dental, Vision, 401K, Short/Long Term Disability, and much moreOvertime AvailableCompetitive SalariesClean work environmentResponsibilities:Assembly Responsibilities:Follow technical instructions, interpret engineering blueprints and technical termsDiscern quality of parts and materials used in productionInventory parts and tools used in the assembling processFollow company procedures and directivesTest finished products for defectsMaintain the tools used to create productsKeep a clean and well-maintained workspaceWelding Responsibilities:Responsible for designing, cutting, and permanently joining metal parts together by using high heat equipment and welding processes such as MIG, TIG, and arc welding.Operate hand-welding and flame-cutting equipment such as an oxyacetylene torch, electric arc machine, and robotic welding cells.Working with materials such as steel, iron, and titanium, and composite materials such as plastics.Able to set up and install welding components/equipment according to set specificationsAble to read blueprints and drawings to identify welding measurements and positions.Fabricator Responsibilities:Able to fabricate sheet metalSet up job and proper toolingShear, punch, brake, and fabricate parts per established procedures and production standardsAble to use measuring tools accurately including angle gauges, tape measure, and Vernier calipersAble to read blueprints and interpret dimensions and tolerancesWorking hours: 5:00 AM - 4:00 PM (Various Shifts Available)Skills:Able to Weld, Fabricate or Assemble partsOperate hand and power toolsRead blueprintsEducation:High SchoolExperience:0-1 yearsQualifications:Experience in Welding, Fabrication or Assembly APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      TOURING TUESDAYS - HIRING EVENT!!MAY 24TH, 2022Hiring Event Schedule   2:00 PM - 6:00 PMBenefitsSign-on BonusesYear-end cash bonusPerformance and wage review after 90 days of employmentPaid HolidaysPTOSafety equipment reimbursementProfit-sharing and 401K ContributionsMedical, Dental, Vision, 401K, Short/Long Term Disability, and much moreOvertime AvailableCompetitive SalariesClean work environmentResponsibilities:Assembly Responsibilities:Follow technical instructions, interpret engineering blueprints and technical termsDiscern quality of parts and materials used in productionInventory parts and tools used in the assembling processFollow company procedures and directivesTest finished products for defectsMaintain the tools used to create productsKeep a clean and well-maintained workspaceWelding Responsibilities:Responsible for designing, cutting, and permanently joining metal parts together by using high heat equipment and welding processes such as MIG, TIG, and arc welding.Operate hand-welding and flame-cutting equipment such as an oxyacetylene torch, electric arc machine, and robotic welding cells.Working with materials such as steel, iron, and titanium, and composite materials such as plastics.Able to set up and install welding components/equipment according to set specificationsAble to read blueprints and drawings to identify welding measurements and positions.Fabricator Responsibilities:Able to fabricate sheet metalSet up job and proper toolingShear, punch, brake, and fabricate parts per established procedures and production standardsAble to use measuring tools accurately including angle gauges, tape measure, and Vernier calipersAble to read blueprints and interpret dimensions and tolerancesWorking hours: 5:00 AM - 4:00 PM (Various Shifts Available)Skills:Able to Weld, Fabricate or Assemble partsOperate hand and power toolsRead blueprintsEducation:High SchoolExperience:0-1 yearsQualifications:Experience in Welding, Fabrication or Assembly APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $70,000 - $90,000 per year
      • 8:00 AM - 5:00 PM
      Seeking an experienced sales and design person. If you love the remodel and new home design process this is a great opportunity to work for a premier cabinet company. This company works on small kitchen remodels to multi-million dollar new builds. The right candidate must be able to execute the visions and needs of clients and contractors with exacting detail.This company has been offering high-quality, custom cabinetry to clients and builders throughout the Twin Cities and southern Minnesota. Join this thriving, family-owned business as we continue to expand our sales market.Responsibilities:Bring in new leads that with proactive follow-up turn into signed contractsWork within a client or contractor???s budget to accurately execute their vision and needsAssist clients in choosing the cabinet style, hardware, paint/stain and many more project detailsCommunicate with coworkers in the shop to ensure accuracy and quality meet our high standardsCoordinate with interior designers that might be part of the projectWork with the client or contractor???s schedule for the projectProduce project drawings using Cabinet Vision to present to the clientTravel as needed for appointmentsAny other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:Goal-oriented and self-motivatedKnowledge of current cabinet and interior design trendsCustomer service and communication skillsHighly organizedExperience with Microsoft Office 365General knowledge of the Remodel and New Construction processEducation:TradeExperience:1-4 yearsQualifications:Proficient with Cabinet Vision and AutoCAD preferredAbility to work remotely and come to the office as needed for client and company meetings or collaborating with coworkers WORK REMOTELY FROM HOME with all Equipment and Office supplies provided, such as laptop, printer, cell phone, car allowance, and more! Base Pay PLUS impressive commission structure! Average pay per year in this position is $85,000-$95,000/yr for productive candidates! Benefits:Health Insurance- company pays 100% of employee-only premium on lowest cost planPaid Time OffHoliday Pay401k plan after 6 monthsBase salary + CommissionSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Seeking an experienced sales and design person. If you love the remodel and new home design process this is a great opportunity to work for a premier cabinet company. This company works on small kitchen remodels to multi-million dollar new builds. The right candidate must be able to execute the visions and needs of clients and contractors with exacting detail.This company has been offering high-quality, custom cabinetry to clients and builders throughout the Twin Cities and southern Minnesota. Join this thriving, family-owned business as we continue to expand our sales market.Responsibilities:Bring in new leads that with proactive follow-up turn into signed contractsWork within a client or contractor???s budget to accurately execute their vision and needsAssist clients in choosing the cabinet style, hardware, paint/stain and many more project detailsCommunicate with coworkers in the shop to ensure accuracy and quality meet our high standardsCoordinate with interior designers that might be part of the projectWork with the client or contractor???s schedule for the projectProduce project drawings using Cabinet Vision to present to the clientTravel as needed for appointmentsAny other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:Goal-oriented and self-motivatedKnowledge of current cabinet and interior design trendsCustomer service and communication skillsHighly organizedExperience with Microsoft Office 365General knowledge of the Remodel and New Construction processEducation:TradeExperience:1-4 yearsQualifications:Proficient with Cabinet Vision and AutoCAD preferredAbility to work remotely and come to the office as needed for client and company meetings or collaborating with coworkers WORK REMOTELY FROM HOME with all Equipment and Office supplies provided, such as laptop, printer, cell phone, car allowance, and more! Base Pay PLUS impressive commission structure! Average pay per year in this position is $85,000-$95,000/yr for productive candidates! Benefits:Health Insurance- company pays 100% of employee-only premium on lowest cost planPaid Time OffHoliday Pay401k plan after 6 monthsBase salary + CommissionSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $16.00 per hour
      • 3:30 PM - 2:00 AM
      As a light Assembler, you will assemble and test high-quality products including, plastic components which meet customer and design engineering specifications.Responsibilities:Assure high-quality products through product testing including complex electronic devices.Perform setup operations for assembly.Safely operate tools and test equipment.Accurately report completion of production and complete required documentation.Respond to changes in the production schedule by prioritizing work to ensure customer and departmental requirements are met.Actively participate and support continuous improvement initiatives, utilizing established methodologies.Follow and continually monitor established safety procedures in order to promote a safe, clean work environment.Working hours: 3:30 PM - 2:00 AMSkills:Must have a good verbal and written understanding of the English languageBasic math skills including percentages, and ability to count accuratelyQuality oriented with ability to perform detailed, repetitive tasksStrong fine motor skillsAbility to work overtime including weekends and alter hours as necessaryEducation:High SchoolExperience:0-1 yearsQualifications:Minimum of a High School Degree or equivalent experience requiredSolder training preferred Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      As a light Assembler, you will assemble and test high-quality products including, plastic components which meet customer and design engineering specifications.Responsibilities:Assure high-quality products through product testing including complex electronic devices.Perform setup operations for assembly.Safely operate tools and test equipment.Accurately report completion of production and complete required documentation.Respond to changes in the production schedule by prioritizing work to ensure customer and departmental requirements are met.Actively participate and support continuous improvement initiatives, utilizing established methodologies.Follow and continually monitor established safety procedures in order to promote a safe, clean work environment.Working hours: 3:30 PM - 2:00 AMSkills:Must have a good verbal and written understanding of the English languageBasic math skills including percentages, and ability to count accuratelyQuality oriented with ability to perform detailed, repetitive tasksStrong fine motor skillsAbility to work overtime including weekends and alter hours as necessaryEducation:High SchoolExperience:0-1 yearsQualifications:Minimum of a High School Degree or equivalent experience requiredSolder training preferred Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $24.00 - $26.00 per hour
      • 8:00 AM - 4:30 PM
      This position is responsible for supporting automotive engineers through testing and troubleshooting prototype designs and making recommendations for continuous improvement.Responsibilities:Support vehicle content development through requirements, design, development, and QA phase.Gather information from vehicles, OE testers, and benchmark tools (reverse engineering).Access and research new information from the web as well as information related to the development of vehicle data, service instructions, and manualsIdentify and procure vehicles for analysis, development, and validation.Utilize automotive bus analyzers and diagnostic equipment to ensure the quality of productsUtilize knowledge of vehicle mechanical fundamentals in order to validate designsWorking hours: 8:00 AM - 4:30 PMSkills:Skilled in the usage of automotive test equipmentModerate knowledge and experience using PC applications such as MS Excel, MS Word, etc.Basic knowledge of databases, MS AccessPC configuration and installation skillsBasic math knowledge such as number systems, basic algebraClear and effective communication skills to work well in a team environment.Ability to follow and understand detailed test proceduresDemonstrated ability to be a self-starterDemonstrated ability to organize work and scheduleAbility to read flow charts including process maps, test plans, and flowsAbility to navigate the internet for research purposesAbility to work independently and with a teamEducation:TradeExperience:0-1 yearsQualifications:Knowledge of fundamental automotive technologiesKnowledge of basic vehicle systems including onboard controls, engine performance, transmission, ABS, and SIR modules Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is responsible for supporting automotive engineers through testing and troubleshooting prototype designs and making recommendations for continuous improvement.Responsibilities:Support vehicle content development through requirements, design, development, and QA phase.Gather information from vehicles, OE testers, and benchmark tools (reverse engineering).Access and research new information from the web as well as information related to the development of vehicle data, service instructions, and manualsIdentify and procure vehicles for analysis, development, and validation.Utilize automotive bus analyzers and diagnostic equipment to ensure the quality of productsUtilize knowledge of vehicle mechanical fundamentals in order to validate designsWorking hours: 8:00 AM - 4:30 PMSkills:Skilled in the usage of automotive test equipmentModerate knowledge and experience using PC applications such as MS Excel, MS Word, etc.Basic knowledge of databases, MS AccessPC configuration and installation skillsBasic math knowledge such as number systems, basic algebraClear and effective communication skills to work well in a team environment.Ability to follow and understand detailed test proceduresDemonstrated ability to be a self-starterDemonstrated ability to organize work and scheduleAbility to read flow charts including process maps, test plans, and flowsAbility to navigate the internet for research purposesAbility to work independently and with a teamEducation:TradeExperience:0-1 yearsQualifications:Knowledge of fundamental automotive technologiesKnowledge of basic vehicle systems including onboard controls, engine performance, transmission, ABS, and SIR modules Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $20.00 - $26.00 per hour
      • 3:45 PM - 3:30 AM
      Responsible for supervising and coordinating activities of workers engaged in the warehouse department.Responsibilities:Supervise all employees in labeling lines, storage and shipment departments.Study production orders to assure type and quantity of labels.Observe labeling operations and inspect cans that canStart, adjust and repair labeling machinery or notify maintenance department.Prepare pack reports.Train workers in operation of equipmentBack-up for all warehouse jobs.May perform other duties as assigned by Warehouse managementMaintain an open line of communication with all employees.Responsible for setting an example for employees on safety and for monitoring and correcting unsafe acts.Supervise and maintain appropriate records for all phases of warehouse production, assuring accurate records.Adhere to all company policies and procedures.Coach and mentor subordinates and other key personnel to perform at the highest level.Openly communicate all labor situations in the warehouse to the Warehouse Manager and HR management.Working hours: 3:45 PM - 3:30 AMSkills:Knowledge:--Computer skills --Have a working knowledge of continuous improvement and/or Lean manufacturing principles.--Experience in change management--Understands and utilizes the principles of management by walking around Language Skills:--Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. --Ability to read, write in English and interpret reports, business correspondence, and procedure manuals. Mathematical Skills:--Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability:--Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. --Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand, walk, sit, use hands and fingers.Education:High SchoolExperience:1-4 yearsQualifications:--Associate degree or equivalent from two-year college or technical school or one year to two years related experience and/or equivalent combination of education and experience. -- Previous experience in a supervisory capacity would be beneficial. Direct Hire position with a reputable company! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for supervising and coordinating activities of workers engaged in the warehouse department.Responsibilities:Supervise all employees in labeling lines, storage and shipment departments.Study production orders to assure type and quantity of labels.Observe labeling operations and inspect cans that canStart, adjust and repair labeling machinery or notify maintenance department.Prepare pack reports.Train workers in operation of equipmentBack-up for all warehouse jobs.May perform other duties as assigned by Warehouse managementMaintain an open line of communication with all employees.Responsible for setting an example for employees on safety and for monitoring and correcting unsafe acts.Supervise and maintain appropriate records for all phases of warehouse production, assuring accurate records.Adhere to all company policies and procedures.Coach and mentor subordinates and other key personnel to perform at the highest level.Openly communicate all labor situations in the warehouse to the Warehouse Manager and HR management.Working hours: 3:45 PM - 3:30 AMSkills:Knowledge:--Computer skills --Have a working knowledge of continuous improvement and/or Lean manufacturing principles.--Experience in change management--Understands and utilizes the principles of management by walking around Language Skills:--Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. --Ability to read, write in English and interpret reports, business correspondence, and procedure manuals. Mathematical Skills:--Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability:--Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. --Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand, walk, sit, use hands and fingers.Education:High SchoolExperience:1-4 yearsQualifications:--Associate degree or equivalent from two-year college or technical school or one year to two years related experience and/or equivalent combination of education and experience. -- Previous experience in a supervisory capacity would be beneficial. Direct Hire position with a reputable company! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $80,000 - $90,000 per year
      • 8:00 AM - 5:00 PM
      This experienced Operations Manager will oversee our cabinet manufacturing with a focus on accuracy and meeting deadlines.This kind company has been offering high-quality, custom cabinetry to clients and builders throughout the Twin Cities and southern Minnesota for 46 years. Join this thriving, family-owned business as they continue to expand production capabilities.Responsibilities:???Manage production schedule with shop supervisors???Oversee production schedule???Setting and reaching production goals???Forecasting using sales schedule???Making sure final measures are completed in a timely manner???Manage a team of 6-8 employees???Ensure training of new employees???Hiring of subcontractors for installation/delivery???Work with AR on billings and collections???Other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:--We believe we accomplish more together than alone. We are looking for individuals who fit our Core Values:--Approachable and Resourceful--Driven--Work as a Team--Craftsmanship--Solution DrivenEducation:No Degree RequiredExperience:4-7 yearsQualifications:???5+ years experience in Operations Management???Carpentry experience preferred???Excellent networking and relationship-building skills???Time management skills???Great communication skills, verbal and written Direct Hire position! Day Shift, Monday thru Friday! Benefits???Health insurance- company pays 100% of employee-only premium on lowest cost plan???Paid vacation???Paid holidays???Paid sick leave???401k and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This experienced Operations Manager will oversee our cabinet manufacturing with a focus on accuracy and meeting deadlines.This kind company has been offering high-quality, custom cabinetry to clients and builders throughout the Twin Cities and southern Minnesota for 46 years. Join this thriving, family-owned business as they continue to expand production capabilities.Responsibilities:???Manage production schedule with shop supervisors???Oversee production schedule???Setting and reaching production goals???Forecasting using sales schedule???Making sure final measures are completed in a timely manner???Manage a team of 6-8 employees???Ensure training of new employees???Hiring of subcontractors for installation/delivery???Work with AR on billings and collections???Other duties as assignedWorking hours: 8:00 AM - 5:00 PMSkills:--We believe we accomplish more together than alone. We are looking for individuals who fit our Core Values:--Approachable and Resourceful--Driven--Work as a Team--Craftsmanship--Solution DrivenEducation:No Degree RequiredExperience:4-7 yearsQualifications:???5+ years experience in Operations Management???Carpentry experience preferred???Excellent networking and relationship-building skills???Time management skills???Great communication skills, verbal and written Direct Hire position! Day Shift, Monday thru Friday! Benefits???Health insurance- company pays 100% of employee-only premium on lowest cost plan???Paid vacation???Paid holidays???Paid sick leave???401k and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.25 - $26.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      PRODUCTION TEAM MEMBERS NEEDED!$1,500 SPOT & STAY BONUSESAPPLY TODAY and be DIRECTLY HIRED for any of the following positions on 1st, 2nd, 3rd shifts available. ASSEMBLY, MACHINE OPERATOR, SHIPPING AND RECEIVING, TRUCK DRIVERS, MAINTENANCEResponsibilities:Assembly & Coating Line Operators (Parts Hangers) Forklift drivers Punch Press & Die Cast Machine Operators Maintenance Mechanics Tool & Die SHIFT DIFFERENTIALS FOR 2nd & 3rd SHIFT BENEFITS: PAID TIME OFF, HEALTH BENEFITS, EDUCATION & FITNESS REIMBURSEMENT, SAFETY GLASSES & SHOE REIMBURSEMENT.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:WILL TRAIN but previous experience in machine operation, forklift, assembly and maintenance is a Preferred.Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience preferred APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      PRODUCTION TEAM MEMBERS NEEDED!$1,500 SPOT & STAY BONUSESAPPLY TODAY and be DIRECTLY HIRED for any of the following positions on 1st, 2nd, 3rd shifts available. ASSEMBLY, MACHINE OPERATOR, SHIPPING AND RECEIVING, TRUCK DRIVERS, MAINTENANCEResponsibilities:Assembly & Coating Line Operators (Parts Hangers) Forklift drivers Punch Press & Die Cast Machine Operators Maintenance Mechanics Tool & Die SHIFT DIFFERENTIALS FOR 2nd & 3rd SHIFT BENEFITS: PAID TIME OFF, HEALTH BENEFITS, EDUCATION & FITNESS REIMBURSEMENT, SAFETY GLASSES & SHOE REIMBURSEMENT.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:WILL TRAIN but previous experience in machine operation, forklift, assembly and maintenance is a Preferred.Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience preferred APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Waseca, Minnesota
      • Temporary
      • $16.00 - $18.50 per hour
      • 8:00 PM - 5:00 PM
      Looking for a motivated and professional individual who is available to work a short term Accounts Payables Clerk Position in Waseca! Looking for individuals with experience in accounting or currently in school for accounting.3-4 month assignmentFull-time or possible part-time for a more experienced individual8:00-5:00 pmResponsibilities:Processing accounts and incoming payments in compliance with financial policies and proceduresPerforming day to day financial transactions, including verifying, classifying, and recording accounts payable dataPreparing bills, invoices and bank depositsWorking hours: 8:00 PM - 5:00 PMSkills:Accounts Payable or Accounting skillsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma 1 year of Accounting or Payables Experience and/or schooling APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Looking for a motivated and professional individual who is available to work a short term Accounts Payables Clerk Position in Waseca! Looking for individuals with experience in accounting or currently in school for accounting.3-4 month assignmentFull-time or possible part-time for a more experienced individual8:00-5:00 pmResponsibilities:Processing accounts and incoming payments in compliance with financial policies and proceduresPerforming day to day financial transactions, including verifying, classifying, and recording accounts payable dataPreparing bills, invoices and bank depositsWorking hours: 8:00 PM - 5:00 PMSkills:Accounts Payable or Accounting skillsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma 1 year of Accounting or Payables Experience and/or schooling APPLY NOWSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Waseca, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 6:00 AM - 2:00 PM
      Light assembly position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business. New facility, new machinery, A/C plant! NO Weekends and NO Holidays!The Production Assemblers are a part of a team that lays the foundation for industry growth. Seeking a collaborative, diligent person that takes pride in their work and can deliver results within a team that is devoted to excellence and embraces organizational and personal growth. HS Diploma NOT required. Once Roll Over Benefits include:-Medical insurance with company contribution-Dental-Vision Insurance-401K -Health Savings Account-Company paid life, short and long-term disability insurance-Paid Holidays and paid time off-Company sponsored retirement plan with matching contributions-Tuition Reimbursement-Parental leave-Referral programResponsibilities:-Light Assembly. -Adhering decals to product. -Very particular process using a hand torch to preheat the plastic then apply the decals which must be straight with no air bubbles. -Air staple caps and inserts to posts. -Assemble nuts, bolts, and wire terminals to test stations. -Able to stand for extended periods of time. -Package product as needed. Able to lift 40lbs. -Perform other miscellaneous duties as assigned under the guidance of fulltime employees.Working hours: 6:00 AM - 2:00 PMSkills:-Detail oriented-Previous manufacturing skills preferredEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Able to pay close attention to detail. -Solid work ethic and organizational skills. -Possesses strength and stamina required to stand, walk and lift for long periods of time. -Required to wear protective eye wear. Protective gloves with the Drill Press.-Must pass pre-employment Drug Screen and Background check. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Light assembly position with a wonderful, well organized, stable and continually growing company with a prominent market position. Over 25 years in business. New facility, new machinery, A/C plant! NO Weekends and NO Holidays!The Production Assemblers are a part of a team that lays the foundation for industry growth. Seeking a collaborative, diligent person that takes pride in their work and can deliver results within a team that is devoted to excellence and embraces organizational and personal growth. HS Diploma NOT required. Once Roll Over Benefits include:-Medical insurance with company contribution-Dental-Vision Insurance-401K -Health Savings Account-Company paid life, short and long-term disability insurance-Paid Holidays and paid time off-Company sponsored retirement plan with matching contributions-Tuition Reimbursement-Parental leave-Referral programResponsibilities:-Light Assembly. -Adhering decals to product. -Very particular process using a hand torch to preheat the plastic then apply the decals which must be straight with no air bubbles. -Air staple caps and inserts to posts. -Assemble nuts, bolts, and wire terminals to test stations. -Able to stand for extended periods of time. -Package product as needed. Able to lift 40lbs. -Perform other miscellaneous duties as assigned under the guidance of fulltime employees.Working hours: 6:00 AM - 2:00 PMSkills:-Detail oriented-Previous manufacturing skills preferredEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Able to pay close attention to detail. -Solid work ethic and organizational skills. -Possesses strength and stamina required to stand, walk and lift for long periods of time. -Required to wear protective eye wear. Protective gloves with the Drill Press.-Must pass pre-employment Drug Screen and Background check. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Permanent
      • $25.00 - $32.00 per hour
      • 7:00 AM - 3:20 PM
      Provide Maintenance and repair services ensuring that CNC and manual equipment is in good running and safe operating condition. SHIFT: M-F 7am-3:20pmResponsibilities:Plans work assignments in order to make efficient use of time and skills and to ensure minimal down time of production equipment. Able to diagnose mechanical and electrical issues related to component failure of highly technical production equipment. Perform preventative maintenance duties on production equipment.Recommends new methods in order to improve safety, quality and productivity.Notify Supervisor of any problems with procedures or equipment in order to maintain highest degree of maintenance and safety equipment. Maintains a high awareness of personal safety at all times. Maintains working area in a neat and orderly manner.Maintain effective working relationships with fellow employees.Perform other duties as necessary.Working hours: 7:00 AM - 3:20 PMSkills:Technical college certificate in Mechanical & Electrical Maintenance.Working knowledge of CNC and manual cutting machineryEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent. Apply now for this Direct Hire (permanent) position with amazing Benefits Pkg at a high growth company that has a Continuous Improvement Board in place for Employee Ideas! AIR CONDITIONED-CLEAN facility! Benefit Package includes: Medical, Vision, Dental, ST/LT Disability, Paid Holidays, Tuition Reimbursement, Prescription Safety Glass Subsidy, 401K, Competitive Compensation, Employee Assistance Program, Shop Clothing with Name Tag ad more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Provide Maintenance and repair services ensuring that CNC and manual equipment is in good running and safe operating condition. SHIFT: M-F 7am-3:20pmResponsibilities:Plans work assignments in order to make efficient use of time and skills and to ensure minimal down time of production equipment. Able to diagnose mechanical and electrical issues related to component failure of highly technical production equipment. Perform preventative maintenance duties on production equipment.Recommends new methods in order to improve safety, quality and productivity.Notify Supervisor of any problems with procedures or equipment in order to maintain highest degree of maintenance and safety equipment. Maintains a high awareness of personal safety at all times. Maintains working area in a neat and orderly manner.Maintain effective working relationships with fellow employees.Perform other duties as necessary.Working hours: 7:00 AM - 3:20 PMSkills:Technical college certificate in Mechanical & Electrical Maintenance.Working knowledge of CNC and manual cutting machineryEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent. Apply now for this Direct Hire (permanent) position with amazing Benefits Pkg at a high growth company that has a Continuous Improvement Board in place for Employee Ideas! AIR CONDITIONED-CLEAN facility! Benefit Package includes: Medical, Vision, Dental, ST/LT Disability, Paid Holidays, Tuition Reimbursement, Prescription Safety Glass Subsidy, 401K, Competitive Compensation, Employee Assistance Program, Shop Clothing with Name Tag ad more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 AM - 2:30 PM
      The Cable Assembler will be responsible for assembling, preparing, and packaging our cable products for shipping.Responsibilities:Assembly of cable componentsPackage cable orders for shipmentRead and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsSome electrical wiringPerform other duties and projects as assignedWorking hours: 6:00 AM - 2:30 PMSkills:--Ability to read instructions, safely operate machines and visually inspect parts produced--Accuracy and timeliness in completion of work assignments is a must--Excellent communication skills--Frequent lifting, standing, and bending required--Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts--Attention to detail is a mustEducation:MastersExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practicesIf you are not vaccinated, a mask is required LOVE YOUR JOB! Everyone we place here says they LOVE their job! CLEAN, NEW, TEMPURATURE CONTROLLED FACILITY, with thee friendliest staff! These are PERMANENT POSITIONS! We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Cable Assembler will be responsible for assembling, preparing, and packaging our cable products for shipping.Responsibilities:Assembly of cable componentsPackage cable orders for shipmentRead and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsSome electrical wiringPerform other duties and projects as assignedWorking hours: 6:00 AM - 2:30 PMSkills:--Ability to read instructions, safely operate machines and visually inspect parts produced--Accuracy and timeliness in completion of work assignments is a must--Excellent communication skills--Frequent lifting, standing, and bending required--Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts--Attention to detail is a mustEducation:MastersExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practicesIf you are not vaccinated, a mask is required LOVE YOUR JOB! Everyone we place here says they LOVE their job! CLEAN, NEW, TEMPURATURE CONTROLLED FACILITY, with thee friendliest staff! These are PERMANENT POSITIONS! We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great company!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Permanent
      • $23.00 - $290.00 per hour
      • 5:00 PM - 6:20 AM
      Perform complex precision set-ups as required and operate various CNC Mills. Certified climate controlled precision CNC machining job shop.12hr Shifts. Work 36hrs/week and get paid for 40!Shift Options: SHIFT 1: DAYS Mon, Tues, Wed 6AM-6:20PMSHIFT 2: NIGHTS Sun, Mon, Tues 6PM-6:20AMSHIFT 3: DAYS Thurs, Fri, Sat 6AM-6:20PMSHIFT 4: NIGHTS Wed, Thurs, Fri 6PM-6:20AMResponsibilities:Perform Set-ups and operate CNC horizontal machining centers in a small lot production environment. Initiate machining processes, tool selection, and feeds & speeds on variety of materials being machined.Provide technical support to machine operators who encounter machinability problems in order to determine the best course of action to correct problem. Using: Blue Prints, CIP, routing sheets, hand tools, precision gauging and measuring tools, CNC machine tools and controls. Demonstrate skill in CNC and Macro program editing. Experience with close tolerances precision machining program. Maintain production rates according to established standards.Maintain quality standards according to inspection procedures.Recommend changes for improved quality and productivity.Maintain high awareness for safety procedures.Maintain work area in a safe, neat, and orderly manner.Perform other duties as required.Working hours: 5:00 PM - 6:20 AMSkills:1-2 years technical college in Machine tool certificate - OR - 3yrs minimum experience in a fast paced, precision, close tolerant environment. Experience working with CNC horizontal machining centers. Able to read Blue PrintsEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent.Machine trades secondary education preferred Want a 3 DAY WORK WEEK? Work 36hrs/Wk and get paid for 40?!! And in an AIR CONDITIONED-CLEAN facility?! Apply now for this Direct Hire (permanent) position at a high growth company that has a Continuous Improvement Board in place for Employee Ideas! PLUS a great Benefit Package including: Medical, Vision, Dental, ST/LT Disability, Paid Holidays, Tuition Reimbursement, Prescription Safety Glass Subsidy, 401K, Competitive Compensation, Employee Assistance Program, Shop Clothing with Name Tag ad more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform complex precision set-ups as required and operate various CNC Mills. Certified climate controlled precision CNC machining job shop.12hr Shifts. Work 36hrs/week and get paid for 40!Shift Options: SHIFT 1: DAYS Mon, Tues, Wed 6AM-6:20PMSHIFT 2: NIGHTS Sun, Mon, Tues 6PM-6:20AMSHIFT 3: DAYS Thurs, Fri, Sat 6AM-6:20PMSHIFT 4: NIGHTS Wed, Thurs, Fri 6PM-6:20AMResponsibilities:Perform Set-ups and operate CNC horizontal machining centers in a small lot production environment. Initiate machining processes, tool selection, and feeds & speeds on variety of materials being machined.Provide technical support to machine operators who encounter machinability problems in order to determine the best course of action to correct problem. Using: Blue Prints, CIP, routing sheets, hand tools, precision gauging and measuring tools, CNC machine tools and controls. Demonstrate skill in CNC and Macro program editing. Experience with close tolerances precision machining program. Maintain production rates according to established standards.Maintain quality standards according to inspection procedures.Recommend changes for improved quality and productivity.Maintain high awareness for safety procedures.Maintain work area in a safe, neat, and orderly manner.Perform other duties as required.Working hours: 5:00 PM - 6:20 AMSkills:1-2 years technical college in Machine tool certificate - OR - 3yrs minimum experience in a fast paced, precision, close tolerant environment. Experience working with CNC horizontal machining centers. Able to read Blue PrintsEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent.Machine trades secondary education preferred Want a 3 DAY WORK WEEK? Work 36hrs/Wk and get paid for 40?!! And in an AIR CONDITIONED-CLEAN facility?! Apply now for this Direct Hire (permanent) position at a high growth company that has a Continuous Improvement Board in place for Employee Ideas! PLUS a great Benefit Package including: Medical, Vision, Dental, ST/LT Disability, Paid Holidays, Tuition Reimbursement, Prescription Safety Glass Subsidy, 401K, Competitive Compensation, Employee Assistance Program, Shop Clothing with Name Tag ad more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Temp to Perm
      • $18.50 per hour
      • 2:30 PM - 1:00 AM
      The Cable Assembler will be responsible for assembling, preparing, and packaging our cable products for shipping.Responsibilities:Assembly of cable componentsPackage cable orders for shipmentRead and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsSome electrical wiringPerform other duties and projects as assignedWorking hours: 2:30 PM - 1:00 AMSkills:--Ability to read instructions, safely operate machines and visually inspect parts produced--Accuracy and timeliness in completion of work assignments is a must--Excellent communication skills--Frequent lifting, standing, and bending required--Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts--Attention to detail is a mustEducation:No Degree RequiredExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practicesIf you are not vaccinated, a mask is required LOVE YOUR JOB! Everyone we place here says they LOVE their job! CLEAN, NEW, TEMPURATURE CONTROLLED FACILITY, with thee friendliest staff! These are PERMANENT POSITIONS! We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great companySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Cable Assembler will be responsible for assembling, preparing, and packaging our cable products for shipping.Responsibilities:Assembly of cable componentsPackage cable orders for shipmentRead and interpret engineering drawings as needed for accurate and safe performance of the jobFollowing Standard Operating Procedures and/or Standard WorkEnsure a high level of quality by completing required in-process quality checksFollow work order directions and safely produce the quantity of parts required and within the required specificationsComplete and maintain all required paperwork necessary in the operationOperate specific assembly toolsSome electrical wiringPerform other duties and projects as assignedWorking hours: 2:30 PM - 1:00 AMSkills:--Ability to read instructions, safely operate machines and visually inspect parts produced--Accuracy and timeliness in completion of work assignments is a must--Excellent communication skills--Frequent lifting, standing, and bending required--Ability to lift and carry up to 25 pounds of metal materials and safely utilizing mechanical lifts--Attention to detail is a mustEducation:No Degree RequiredExperience:0-1 yearsQualifications:This is a fast paced and physically demanding position. Must have hand and wrist strength. Comfortable with hand tools and heavy lifting. Basic understanding & reading of specifications & blueprintsBasic understanding of assemblyBasic understanding of basic electrical assemblyKnowledge of assembly practicesIf you are not vaccinated, a mask is required LOVE YOUR JOB! Everyone we place here says they LOVE their job! CLEAN, NEW, TEMPURATURE CONTROLLED FACILITY, with thee friendliest staff! These are PERMANENT POSITIONS! We value our employees and look for people that want to grow with our company. A highly competitive salary, medical and dental benefits, a successful 401(k) Plan and a matching Educational package are just some of the benefits of working at this great companySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Dodge Center, Minnesota
      • Permanent
      • $18.00 - $23.00 per hour
      • 6:00 AM - 4:00 PM (Various Shifts Available)
      ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!1ST AND 2ND SHIFT AVAILABLE $18-23/HR!$1000 HIRING BONUS! $500 ON FIRST DAY!!Responsibilities:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!Working hours: 6:00 AM - 4:00 PM (Various Shifts Available)Skills:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!Education:High SchoolExperience:0-1 yearsQualifications:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!! APPLY NOW!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!1ST AND 2ND SHIFT AVAILABLE $18-23/HR!$1000 HIRING BONUS! $500 ON FIRST DAY!!Responsibilities:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!Working hours: 6:00 AM - 4:00 PM (Various Shifts Available)Skills:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!!Education:High SchoolExperience:0-1 yearsQualifications:ASSEMBLY, FABRICATOR AND WELDER POSITIONS AVAILABLE!! APPLY NOW!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    Explore over 16 jobs in Owatonna

    It looks like you want to switch your language. This will reset your filters on your current job search.