Thank you for subscribing to your personalized job alerts.

    20 jobs found in mapleton, north dakota

    Filter2
    • Industry1
      Working in
      Show 20 jobs
      Clear filter
    • Location1
      Location & range
        Show 20 jobs
        Clear filter
      • Job types
        Job types
        Show 20 jobs
        Clear filter
      • Salary
        Salary
        $
        Show 20 jobs
        Clear filter
      Clear all
        • West Fargo, North Dakota
        • Temp to Perm
        • $14.00 - $16.00 per hour
        • 6:00 AM - 4:30 PM
        Spherion Staffing is looking for several Truss Assemblers to work a full time day shift with a local company. This position will be assembling trusses as specified on production drawings using precut wood components and metal connector plates. Work with station crew members to meet production goals in a safe and efficient manner.Monday-Friday 6 am-4:30 pm (some Saturdays 8am-1 pm)Pay $14-16/hour DOEResponsibilities:- Maintain a safe and clean work environment by complying with company's safety policies- Verify that pre-cut parts for orders are the correct size, grade, angle and length- Perform quality checks on material prior to assembly and on completed truss prior ejecting off assemble table- Set truss jig on assembly table to match production drawings- Lift and place precut components in truss jig as specified on production drawings- Attach connector plates to truss joints, as specifies by production drawings, using a hammer- Operate preset roller to press connector plates into truss lumber- Eject completed truss to out-feed rollers to be transferred to truss finish rollerResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-Must have basic math skills-Ability to read tape measure-Ability to read and understand production drawings-Ability to operate pneumatic nail/staple gun-Ability to lift and carry up to 50 pounds -Ability to Lift /Push completed floor trusses weighing up to 75 lbs onto stacking cartEducation:High SchoolExperience:0-1 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is looking for several Truss Assemblers to work a full time day shift with a local company. This position will be assembling trusses as specified on production drawings using precut wood components and metal connector plates. Work with station crew members to meet production goals in a safe and efficient manner.Monday-Friday 6 am-4:30 pm (some Saturdays 8am-1 pm)Pay $14-16/hour DOEResponsibilities:- Maintain a safe and clean work environment by complying with company's safety policies- Verify that pre-cut parts for orders are the correct size, grade, angle and length- Perform quality checks on material prior to assembly and on completed truss prior ejecting off assemble table- Set truss jig on assembly table to match production drawings- Lift and place precut components in truss jig as specified on production drawings- Attach connector plates to truss joints, as specifies by production drawings, using a hammer- Operate preset roller to press connector plates into truss lumber- Eject completed truss to out-feed rollers to be transferred to truss finish rollerResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-Must have basic math skills-Ability to read tape measure-Ability to read and understand production drawings-Ability to operate pneumatic nail/staple gun-Ability to lift and carry up to 50 pounds -Ability to Lift /Push completed floor trusses weighing up to 75 lbs onto stacking cartEducation:High SchoolExperience:0-1 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $14.00 - $16.00 per hour
        • 6:30 PM - 5:00 AM
        Spherion Staffing has several 1st shift positions available for Assistant Machine Operators working with a local client. The assistant operators will help set up and remove molds and product from the press. In this role you would be separating composite boards from the molds and tearing away the plastic lining, stacking boards on pallets, prepping for the next mold and running boards through a sander.Monday-Thursday 6:30 pm-5 am (some overtime required)Pay $14-16/hour DOEResponsibilities:- Remove finished or cured product from dies or mold, using hand tools and air hose- Measure and visually inspect products for surface and dimension defects, using precision measuring instruments, to ensure conformance to specifications- Position, align, and secure assembled mold, mold components, and machine accessories onto machine press bed, and attaches connecting lines- Install dies onto machine or press and coats dies with parting agent, according to work order specifications- Press button or pull lever to activate machine to inject dies and compress compounds to form and cure specified products- Observe and adjust machine set up and operations to eliminate production of defective parts and products- Weigh premixed compounds and dump compound into die well or fills hoppers of machines that automatically supply compound to die- Read specifications to determine setup and prescribed temperature and time settings to mold, form, or cast plastic materialsResponsibilities:See aboveWorking hours: 6:30 PM - 5:00 AMSkills:Requirements:-High School diploma or GED-Requires ability to lift up to 75#s-Must be able to handle repetitive work-Must be a team player-Must have good attention to detail to QC productEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-288Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has several 1st shift positions available for Assistant Machine Operators working with a local client. The assistant operators will help set up and remove molds and product from the press. In this role you would be separating composite boards from the molds and tearing away the plastic lining, stacking boards on pallets, prepping for the next mold and running boards through a sander.Monday-Thursday 6:30 pm-5 am (some overtime required)Pay $14-16/hour DOEResponsibilities:- Remove finished or cured product from dies or mold, using hand tools and air hose- Measure and visually inspect products for surface and dimension defects, using precision measuring instruments, to ensure conformance to specifications- Position, align, and secure assembled mold, mold components, and machine accessories onto machine press bed, and attaches connecting lines- Install dies onto machine or press and coats dies with parting agent, according to work order specifications- Press button or pull lever to activate machine to inject dies and compress compounds to form and cure specified products- Observe and adjust machine set up and operations to eliminate production of defective parts and products- Weigh premixed compounds and dump compound into die well or fills hoppers of machines that automatically supply compound to die- Read specifications to determine setup and prescribed temperature and time settings to mold, form, or cast plastic materialsResponsibilities:See aboveWorking hours: 6:30 PM - 5:00 AMSkills:Requirements:-High School diploma or GED-Requires ability to lift up to 75#s-Must be able to handle repetitive work-Must be a team player-Must have good attention to detail to QC productEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-288Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $15.00 - $18.00 per hour
        • 5:00 AM - 3:30 PM
        Spherion Staffing has several 1st shift positions available for Assistant Machine Operators working with a local client. The assistant operators will help set up and remove molds and product from the press. In this role you would be separating composite boards from the molds and tearing away the plastic lining, stacking boards on pallets, prepping for the next mold and running boards through a sander.Monday-Thursday 5 am-3:30 pm (some overtime required)Pay $15-18/hour DOEResponsibilities:- Remove finished or cured product from dies or mold, using hand tools and air hose- Measure and visually inspect products for surface and dimension defects, using precision measuring instruments, to ensure conformance to specifications- Position, align, and secure assembled mold, mold components, and machine accessories onto machine press bed, and attaches connecting lines- Install dies onto machine or press and coats dies with parting agent, according to work order specifications- Press button or pull lever to activate machine to inject dies and compress compounds to form and cure specified products- Observe and adjust machine set up and operations to eliminate production of defective parts and products- Weigh premixed compounds and dump compound into die well or fills hoppers of machines that automatically supply compound to die- Read specifications to determine setup and prescribed temperature and time settings to mold, form, or cast plastic materialsResponsibilities:See aboveWorking hours: 5:00 AM - 3:30 PMSkills:Requirements:-High School diploma or GED-Requires ability to lift up to 75#s-Must be able to handle repetitive work-Must be a team player-Must have good attention to detail to QC productEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-288Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has several 1st shift positions available for Assistant Machine Operators working with a local client. The assistant operators will help set up and remove molds and product from the press. In this role you would be separating composite boards from the molds and tearing away the plastic lining, stacking boards on pallets, prepping for the next mold and running boards through a sander.Monday-Thursday 5 am-3:30 pm (some overtime required)Pay $15-18/hour DOEResponsibilities:- Remove finished or cured product from dies or mold, using hand tools and air hose- Measure and visually inspect products for surface and dimension defects, using precision measuring instruments, to ensure conformance to specifications- Position, align, and secure assembled mold, mold components, and machine accessories onto machine press bed, and attaches connecting lines- Install dies onto machine or press and coats dies with parting agent, according to work order specifications- Press button or pull lever to activate machine to inject dies and compress compounds to form and cure specified products- Observe and adjust machine set up and operations to eliminate production of defective parts and products- Weigh premixed compounds and dump compound into die well or fills hoppers of machines that automatically supply compound to die- Read specifications to determine setup and prescribed temperature and time settings to mold, form, or cast plastic materialsResponsibilities:See aboveWorking hours: 5:00 AM - 3:30 PMSkills:Requirements:-High School diploma or GED-Requires ability to lift up to 75#s-Must be able to handle repetitive work-Must be a team player-Must have good attention to detail to QC productEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-288Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • West Fargo, North Dakota
        • Temp to Perm
        • $19.00 - $22.00 per hour
        • 6:00 AM - 4:30 PM
        Spherion Staffing has multiple Press Brake Operator positions available on 1st shift.The Press Brake Operators will produce precision metal parts as specified by the work order, job specifications, and blueprints. The position performs all levels of set-ups, creates simple programs manually or using software, and prepares minor fixture designs for CNC lathes and millsMonday thru Thursday 6am to 4:30pmPay: $19-20/hour DOEResponsibilities:- Review work order to identify job specifications and required material and parts- Locate, measure, and check quality of material to be fabricated- Set-up, calibrate, and adjust machines and equipment to job specifications- Prepare and organize raw material on pallets to maximize workspace- Operate brake, shear, and press machinery to form raw material into parts according to job specifications and blueprints from work orders- Review completed work to ensure parts meet company and customer quality requirements in accordance with ISO 9001- Load and unload completed material and parts onto pallets- Track and record rejected parts, time cycles, production levels, and tool control- Follow safety precautions and company guidelines- Perform regular cleaning and maintenance duties on machines, tools, equipment, and work area by checking oil, changing oil filters, calibrating mechanisms, and checking for accuracy- Deliver cut material and parts to other departments for the next stage in processingResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-High School diploma or GED-2 plus years of prior work experience setting up machines, interpreting blueprints, drafting flat lay-outs, and operating CNC metal fabrication machinery-Must exhibit good attention to detail to identify and understand detailed job requirements and ensure job specifications are followed precisely-Ability to work independently with minimal supervision-Ability to use various tools, equipment, and machinery-Ability to see clearly to determine distances and shapesEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has multiple Press Brake Operator positions available on 1st shift.The Press Brake Operators will produce precision metal parts as specified by the work order, job specifications, and blueprints. The position performs all levels of set-ups, creates simple programs manually or using software, and prepares minor fixture designs for CNC lathes and millsMonday thru Thursday 6am to 4:30pmPay: $19-20/hour DOEResponsibilities:- Review work order to identify job specifications and required material and parts- Locate, measure, and check quality of material to be fabricated- Set-up, calibrate, and adjust machines and equipment to job specifications- Prepare and organize raw material on pallets to maximize workspace- Operate brake, shear, and press machinery to form raw material into parts according to job specifications and blueprints from work orders- Review completed work to ensure parts meet company and customer quality requirements in accordance with ISO 9001- Load and unload completed material and parts onto pallets- Track and record rejected parts, time cycles, production levels, and tool control- Follow safety precautions and company guidelines- Perform regular cleaning and maintenance duties on machines, tools, equipment, and work area by checking oil, changing oil filters, calibrating mechanisms, and checking for accuracy- Deliver cut material and parts to other departments for the next stage in processingResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-High School diploma or GED-2 plus years of prior work experience setting up machines, interpreting blueprints, drafting flat lay-outs, and operating CNC metal fabrication machinery-Must exhibit good attention to detail to identify and understand detailed job requirements and ensure job specifications are followed precisely-Ability to work independently with minimal supervision-Ability to use various tools, equipment, and machinery-Ability to see clearly to determine distances and shapesEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $13.00 - $15.00 per hour
        • 7:30 AM - 4:00 PM
        Spherion Staffing is looking for two Sign Production Specialists to operate a variety of equipment to produce high quality signage. Production or quality control experience a plus.Monday-Friday 7:30 am-4 pm Pay $13-15/hour DOEResponsibilities:- Produce high quality signage operating a variety of equipment in the sign production industry- Provide backup support to production departments- Read job specifications to determine machine adjustments and material requirements- Consult with sales staff to provide accurate estimates of labor time and to set realistic deadlinesResponsibilities:See aboveWorking hours: 7:30 AM - 4:00 PMSkills:Requirements:-High School Diploma or GED required-Production or quality control experience a plus-Must have knowledge of techniques and tools to accomplish this detailed work-Strong interpersonal and communication skills and the ability to work effectively in a team environment with people of varying skills and backgrounds-Highly motivated, self-directed, multi crafted worker that is able to work in a team or by one self-Knowledge of safety policies and procedures is required-Ability to troubleshoot problems and propose solutionsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is looking for two Sign Production Specialists to operate a variety of equipment to produce high quality signage. Production or quality control experience a plus.Monday-Friday 7:30 am-4 pm Pay $13-15/hour DOEResponsibilities:- Produce high quality signage operating a variety of equipment in the sign production industry- Provide backup support to production departments- Read job specifications to determine machine adjustments and material requirements- Consult with sales staff to provide accurate estimates of labor time and to set realistic deadlinesResponsibilities:See aboveWorking hours: 7:30 AM - 4:00 PMSkills:Requirements:-High School Diploma or GED required-Production or quality control experience a plus-Must have knowledge of techniques and tools to accomplish this detailed work-Strong interpersonal and communication skills and the ability to work effectively in a team environment with people of varying skills and backgrounds-Highly motivated, self-directed, multi crafted worker that is able to work in a team or by one self-Knowledge of safety policies and procedures is required-Ability to troubleshoot problems and propose solutionsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $15.74 - $15.75 per hour
        • 2:15 PM - 10:15 PM
        Spherion Staffing is now interviewing for 2nd shift Electronic Assembly positions for John Deere in Fargo. Qualified candidates will assemble Electronic Control Panels and Printed Circuit Boards (PCBs). Qualified candidates must be able to speak, read and comprehend the English language very well.2nd shift 2:15 pm-10:15 pm Monday through Friday with the potential of overtime during seasonal peaks$15.75/hour$500 Performance bonus availableResponsibilities: - Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria- Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 2:15 PM - 10:15 PMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved. -Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is now interviewing for 2nd shift Electronic Assembly positions for John Deere in Fargo. Qualified candidates will assemble Electronic Control Panels and Printed Circuit Boards (PCBs). Qualified candidates must be able to speak, read and comprehend the English language very well.2nd shift 2:15 pm-10:15 pm Monday through Friday with the potential of overtime during seasonal peaks$15.75/hour$500 Performance bonus availableResponsibilities: - Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria- Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 2:15 PM - 10:15 PMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved. -Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $15.74 - $15.75 per hour
        • 6:15 AM - 2:15 PM
        Spherion Staffing has openings at John Deere on first shift for assembly of Electronic Control Panels and Printed Circuit Boards (PCBs). Qualified candidates must be able to speak, read and comprehend the English language very well.1st shift 6:15 am to 2:15 pm Monday through Friday with the potential of overtime during seasonal peaks$15.75/hour$500 Performance bonus availableResponsibilities: - Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria- Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 6:15 AM - 2:15 PMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved-Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has openings at John Deere on first shift for assembly of Electronic Control Panels and Printed Circuit Boards (PCBs). Qualified candidates must be able to speak, read and comprehend the English language very well.1st shift 6:15 am to 2:15 pm Monday through Friday with the potential of overtime during seasonal peaks$15.75/hour$500 Performance bonus availableResponsibilities: - Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria- Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 6:15 AM - 2:15 PMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved-Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $15.74 - $15.75 per hour
        • 10:15 PM - 6:15 AM
        Spherion Staffing is looking for 3rd shift production workers to assemble electronic boards for John Deere in Fargo. The Electronics Assembler is responsible for performing various assembly tasks for the manufacturing process, recording product statistical measurements, and self-managing to ensure productivity and quality levels are met. Qualified applicants should have clear verbal and written communication skills, prior manufacturing or assembly experience, familiarity with hand tools, and be able to repeatedly lift up to 50 pounds.10:15 pm -6:15 am $15.75/hour$500 Performance bonus availableResponsibilities:- Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria - Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 10:15 PM - 6:15 AMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved-Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is looking for 3rd shift production workers to assemble electronic boards for John Deere in Fargo. The Electronics Assembler is responsible for performing various assembly tasks for the manufacturing process, recording product statistical measurements, and self-managing to ensure productivity and quality levels are met. Qualified applicants should have clear verbal and written communication skills, prior manufacturing or assembly experience, familiarity with hand tools, and be able to repeatedly lift up to 50 pounds.10:15 pm -6:15 am $15.75/hour$500 Performance bonus availableResponsibilities:- Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria - Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 10:15 PM - 6:15 AMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved-Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $15.99 - $16.00 per hour
        • 10:30 PM - 6:30 AM
        Spherion Staffing has openings on 3rd shift for Manufacturing- Assembly associates to work with a local manufacturing company. Successful applicant will operate computer automated, high-tech machinery and equipment to produce glass units. This is a VERY physical position.$16/hour10:30pm - 6:30am Sunday - Thursday, OT as neededResponsibilities:- Run production machines that cut glass- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 10:30 PM - 6:30 AMSkills:Requirements:-High School diploma or GED -Previous assembly experience preferred-Must be able to read a tape measure-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basis-Physically capable of manual labor that includes standing, walking, lifting, bending, and reachingEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has openings on 3rd shift for Manufacturing- Assembly associates to work with a local manufacturing company. Successful applicant will operate computer automated, high-tech machinery and equipment to produce glass units. This is a VERY physical position.$16/hour10:30pm - 6:30am Sunday - Thursday, OT as neededResponsibilities:- Run production machines that cut glass- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 10:30 PM - 6:30 AMSkills:Requirements:-High School diploma or GED -Previous assembly experience preferred-Must be able to read a tape measure-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basis-Physically capable of manual labor that includes standing, walking, lifting, bending, and reachingEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • West Fargo, North Dakota
        • Temp to Perm
        • $14.73 - $15.73 per hour
        • 6:00 AM - 4:30 PM
        Spherion Staffing has positions on both 1st and 2nd shifts for Assembly/Disassembly Technicians with a local manufacturing company. The Assembly/Disassembly Technicians will be cleaning parts in the assembly area and will operate a variety of tools and equipment to assemble and disassemble products in a manufacturing environment. This position will also be using a hoist/crane frequently.Pay is $14.73/hour + $1/hour shift differential for 2nd shift1st shift positions is 6am - 4:30pm Monday - Thursday2nd shift schedule is 4:15pm-2:45am Monday - Thursday**must be open to working overtime**Responsibilities:- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications- Use precision measuring devices to effectively assemble and/or disassemble final product - Perform preventive maintenance as required- Assist in identifying issues and initiating corrective action processes as necessary- Perform 5S Audits- Perform Safety Stop Audits observations as required- Identifies and accurately categorizes wear patterns of parts - Troubleshoot quality problemsResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements: -Minimum 2 years job related experience in a manufacturing environment preferred -Must have the ability to effectively interpret blueprints-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environment-Must have good oral and written communication skills -Ability to lift and carry up to 35 pounds -Drug, background screens and physicals are requiredEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has positions on both 1st and 2nd shifts for Assembly/Disassembly Technicians with a local manufacturing company. The Assembly/Disassembly Technicians will be cleaning parts in the assembly area and will operate a variety of tools and equipment to assemble and disassemble products in a manufacturing environment. This position will also be using a hoist/crane frequently.Pay is $14.73/hour + $1/hour shift differential for 2nd shift1st shift positions is 6am - 4:30pm Monday - Thursday2nd shift schedule is 4:15pm-2:45am Monday - Thursday**must be open to working overtime**Responsibilities:- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications- Use precision measuring devices to effectively assemble and/or disassemble final product - Perform preventive maintenance as required- Assist in identifying issues and initiating corrective action processes as necessary- Perform 5S Audits- Perform Safety Stop Audits observations as required- Identifies and accurately categorizes wear patterns of parts - Troubleshoot quality problemsResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements: -Minimum 2 years job related experience in a manufacturing environment preferred -Must have the ability to effectively interpret blueprints-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environment-Must have good oral and written communication skills -Ability to lift and carry up to 35 pounds -Drug, background screens and physicals are requiredEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $15.24 - $15.25 per hour
        • 2:30 PM - 10:30 PM
        Spherion Staffing has several openings for Glass Production associates on 2nd shift, working for a local manufacturing company. Qualified applicants will provide a variety of repetitive tasks following work instructions, visual inspection of finished units and observe all company Good Manufacturing Practices (GMPs). These are very physical positions.Pay- $15.25/hour6:30 PM to 6:30 AMResponsibilities:- Operate computer automated, high-tech machinery and equipment to produce glass units- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environment- Basic computer, math and tape measuring skills- Must be able to stand and walk for long periods of time- Ability to lift up to 50 pounds on a regular basisResponsibilities:See aboveWorking hours: 2:30 PM - 10:30 PMSkills:Requirements:-High School diploma or GED-Previous assembly experience preferredEducation:High SchoolExperience:1-4 yearsQualifications:To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901 To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has several openings for Glass Production associates on 2nd shift, working for a local manufacturing company. Qualified applicants will provide a variety of repetitive tasks following work instructions, visual inspection of finished units and observe all company Good Manufacturing Practices (GMPs). These are very physical positions.Pay- $15.25/hour6:30 PM to 6:30 AMResponsibilities:- Operate computer automated, high-tech machinery and equipment to produce glass units- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environment- Basic computer, math and tape measuring skills- Must be able to stand and walk for long periods of time- Ability to lift up to 50 pounds on a regular basisResponsibilities:See aboveWorking hours: 2:30 PM - 10:30 PMSkills:Requirements:-High School diploma or GED-Previous assembly experience preferredEducation:High SchoolExperience:1-4 yearsQualifications:To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901 To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $13.00 - $16.00 per hour
        • Various Shifts Available
        Spherion Staffing is assisting our client who is looking for a Flour Packaging Technician to package flour products under the director of the Head Miller. Qualified applicants must be willing to work a rotating shift, have 1+ years of forklift experience and 1+ years of warehouse/manufacturing experience.24/7 rotating shifts-7am-3pm, 3pm-11pm and 11pm-7amPay $13-16/hour DOE with shift differentials ($2 for 2nd shift and $3 for third shift)Responsibilities:- Operation and monitoring of a robotic auto packer- Ensure machine operation is optimal and quality of packaging is maintained- Keep accurate inventories of finished products and raw materials through a barcoding system- Operation of valve packer and periodically hand stacking finished product is required- Operate packaging equipment including scales, bag sealer, product conveyors and other equipment- Maintain sanitation standards established by the companyResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School diploma or equivalent required-1 plus years of warehouse/manufacturing experience -1 plus years of forklift experience preferred-Excellent comprehension of verbal and written instruction is a must-Competent computer skills with knowledge of Programmable Logic Controllers (PLCs) and barcoding preferred-Ability to physically lift 50 pounds routinelyEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is assisting our client who is looking for a Flour Packaging Technician to package flour products under the director of the Head Miller. Qualified applicants must be willing to work a rotating shift, have 1+ years of forklift experience and 1+ years of warehouse/manufacturing experience.24/7 rotating shifts-7am-3pm, 3pm-11pm and 11pm-7amPay $13-16/hour DOE with shift differentials ($2 for 2nd shift and $3 for third shift)Responsibilities:- Operation and monitoring of a robotic auto packer- Ensure machine operation is optimal and quality of packaging is maintained- Keep accurate inventories of finished products and raw materials through a barcoding system- Operation of valve packer and periodically hand stacking finished product is required- Operate packaging equipment including scales, bag sealer, product conveyors and other equipment- Maintain sanitation standards established by the companyResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School diploma or equivalent required-1 plus years of warehouse/manufacturing experience -1 plus years of forklift experience preferred-Excellent comprehension of verbal and written instruction is a must-Competent computer skills with knowledge of Programmable Logic Controllers (PLCs) and barcoding preferred-Ability to physically lift 50 pounds routinelyEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Permanent
        • $16.00 - $19.00 per hour
        • Various Shifts Available
        Spherion Staffing is looking for experienced Paint Booth Operators.This position is engaged in operating a variety of activities to finish the part or product to company specifications. This position is responsible for operating and maintaining painting equipment in a safe and efficient manner to achieve the quality and production standards of the Corporation. This position includes loading and unloading materials and powder booth spraying duties. This position will also assist around the plant if the booth is caught up on products. Pay $16-19/hour DOE Responsibilities:- Inspect product for weight, thickness, dimensions, product type, and physical appearance in order to ensure product meets SAS quality standards and customer requirements- Package materials to customer and SAS specifications- Complete work orders completely and ensure all information entered is accurate- Maintain productivity at a level that achieves schedule completion and maintains quality- Assist Maintenance Supervisor and Production Supervisor in completing the PMP- Maintain equipment in proper operating condition in regards to PMP, housekeeping, and greasing- Assure proper flow of materials through the Department in the absence of the Production Supervisor- Train new operators on spray booth operations, and SAS systems- Some PC work required, must be able to enter measurements and activity into database- Complete all safety training programs and score within SAS standard requirements- Assist Production Supervisor in keeping track of inventory of supplies, small tools, shipping supplies, pallets, etc.Responsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-High school education and technical training or equivalent experience-Must have spray booth experienceEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is looking for experienced Paint Booth Operators.This position is engaged in operating a variety of activities to finish the part or product to company specifications. This position is responsible for operating and maintaining painting equipment in a safe and efficient manner to achieve the quality and production standards of the Corporation. This position includes loading and unloading materials and powder booth spraying duties. This position will also assist around the plant if the booth is caught up on products. Pay $16-19/hour DOE Responsibilities:- Inspect product for weight, thickness, dimensions, product type, and physical appearance in order to ensure product meets SAS quality standards and customer requirements- Package materials to customer and SAS specifications- Complete work orders completely and ensure all information entered is accurate- Maintain productivity at a level that achieves schedule completion and maintains quality- Assist Maintenance Supervisor and Production Supervisor in completing the PMP- Maintain equipment in proper operating condition in regards to PMP, housekeeping, and greasing- Assure proper flow of materials through the Department in the absence of the Production Supervisor- Train new operators on spray booth operations, and SAS systems- Some PC work required, must be able to enter measurements and activity into database- Complete all safety training programs and score within SAS standard requirements- Assist Production Supervisor in keeping track of inventory of supplies, small tools, shipping supplies, pallets, etc.Responsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-High school education and technical training or equivalent experience-Must have spray booth experienceEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Kindred, North Dakota
        • Temp to Perm
        • $15.49 - $15.50 per hour
        • 7:00 AM - 5:30 PM
        Spherion Staffing has several openings for Production Associates to produce/assemble agriculture equipment. This position will perform regular assembly of grain handling equipment using hand and pneumatic tools. Qualified applicants should have at least 1 year of manufacturing experience and 1-3 years forklift experience.Fall - Spring Schedule: Monday - Thursday: 7 am-5:30 pm Summer Schedule: Monday - Thursday: 7 am-5:30 pm plus Fridays 7 am until noon (or when work is needed)$15.50/hour Responsibilities:- Assemble products according to specifications using hand or power tools- Operate fork lift as required- Measure parts to specified tolerances- Clean, assembles, disassembles, and replaces parts as required- Keep production manager advised of work status, workload, problems, and progress as related to work assignments- Maintain the work area and equipment in a clean orderly condition and follows prescribed safety regulations- Troubleshoot equipment and makes necessary repairsResponsibilities:See aboveWorking hours: 7:00 AM - 5:30 PMSkills:Requirements:-High School diploma or GED-1-year manufacturing experience and 1-3 years forklift experience preferred -Must be mechanically inclined and know how to use a tape measure-Mathematical skills including, addition, subtraction, addition, and multiplications-Must be detail orientedEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has several openings for Production Associates to produce/assemble agriculture equipment. This position will perform regular assembly of grain handling equipment using hand and pneumatic tools. Qualified applicants should have at least 1 year of manufacturing experience and 1-3 years forklift experience.Fall - Spring Schedule: Monday - Thursday: 7 am-5:30 pm Summer Schedule: Monday - Thursday: 7 am-5:30 pm plus Fridays 7 am until noon (or when work is needed)$15.50/hour Responsibilities:- Assemble products according to specifications using hand or power tools- Operate fork lift as required- Measure parts to specified tolerances- Clean, assembles, disassembles, and replaces parts as required- Keep production manager advised of work status, workload, problems, and progress as related to work assignments- Maintain the work area and equipment in a clean orderly condition and follows prescribed safety regulations- Troubleshoot equipment and makes necessary repairsResponsibilities:See aboveWorking hours: 7:00 AM - 5:30 PMSkills:Requirements:-High School diploma or GED-1-year manufacturing experience and 1-3 years forklift experience preferred -Must be mechanically inclined and know how to use a tape measure-Mathematical skills including, addition, subtraction, addition, and multiplications-Must be detail orientedEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Kindred, North Dakota
        • Temp to Perm
        • $16.49 - $16.50 per hour
        • 7:00 AM - 5:30 PM
        Spherion Staffing is interviewing for 1st shift Press Machine Operators to work with our client, a manufacturing company. The Machine Operators are responsible for the daily setup and operation of fabrication equipment. Qualified applicants should have a minimum of 1 year experience in a metal manufacturing environment.Monday-Friday 7 am-5:30 pmPay $16.50/hourResponsibilities:- Load, install and correctly set up the proper tools required- Verify conformance of work pieces to specifications, using square, ruler and measuring tape- Perform assigned work to time standards and quality expectations- Safely operate forklifts and other equipment to handle materials and completed work- Make routine decisions and use problem solving to resolve basic manufacturing issues or seek assistance- Assist other operators on other machines as needed- Report and document basic material, production and quality control issues- Maintain performance log books on assigned area equipment and report any deficiencies- Maintain safe and clean working environment by complying with all safety procedures, rules and regulationsResponsibilities:See aboveWorking hours: 7:00 AM - 5:30 PMSkills:Requirements:-High school education and technical training or equivalent experience-Minimum 1 year experience in a metal manufacturing environment is preferred-Basic fabrication background required-Must be competent at basic dimensional measuring and math-Ability to quickly learn the use of precision measurement tools-Must be able to read and understand blueprints and other shop drawing required-Ability to work with various types of metal forming constraints with guidance-Ability to work independently and with a team-Must know the difference between metric and standards for tooling-Ability to read a diagramEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-291Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is interviewing for 1st shift Press Machine Operators to work with our client, a manufacturing company. The Machine Operators are responsible for the daily setup and operation of fabrication equipment. Qualified applicants should have a minimum of 1 year experience in a metal manufacturing environment.Monday-Friday 7 am-5:30 pmPay $16.50/hourResponsibilities:- Load, install and correctly set up the proper tools required- Verify conformance of work pieces to specifications, using square, ruler and measuring tape- Perform assigned work to time standards and quality expectations- Safely operate forklifts and other equipment to handle materials and completed work- Make routine decisions and use problem solving to resolve basic manufacturing issues or seek assistance- Assist other operators on other machines as needed- Report and document basic material, production and quality control issues- Maintain performance log books on assigned area equipment and report any deficiencies- Maintain safe and clean working environment by complying with all safety procedures, rules and regulationsResponsibilities:See aboveWorking hours: 7:00 AM - 5:30 PMSkills:Requirements:-High school education and technical training or equivalent experience-Minimum 1 year experience in a metal manufacturing environment is preferred-Basic fabrication background required-Must be competent at basic dimensional measuring and math-Ability to quickly learn the use of precision measurement tools-Must be able to read and understand blueprints and other shop drawing required-Ability to work with various types of metal forming constraints with guidance-Ability to work independently and with a team-Must know the difference between metric and standards for tooling-Ability to read a diagramEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-291Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • West Fargo, North Dakota
        • Temp to Perm
        • $19.00 - $25.00 per hour
        • 6:00 AM - 4:30 PM
        Spherion Staffing is assisting our client; a local industrial manufacturing company who is looking for 1st shift welders. The Welder positions will perform various types of weld and finishing operations and assist as needed with performing 5S Audits. Qualified candidates should have a 2 year Tech degree.6am - 4:30pm. Monday-Thursday; OT Fridays if neededPay $19-25/hour DOEResponsibilities:- Repair non-standard flaws with limited or no assistance- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications - Conduct pre and post inspection on all welded parts- Plan and make difficult or new setups with necessary equipment- Perform preventive maintenance as required- Perform 5S Audits- Perform Safety Stop Audits observations as required- Participate in the CI/PID ProcessResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-Two-year tech school degree or equivalent experience preferred-Minimum 2 years job related experience in a manufacturing environment preferred-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environment -Effective oral and written communication skills-Effective decision making, analytical, and problem solving skills-Ability to effectively interpret blueprints-Ability to organize and prioritize work-Ability to produce quality productsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is assisting our client; a local industrial manufacturing company who is looking for 1st shift welders. The Welder positions will perform various types of weld and finishing operations and assist as needed with performing 5S Audits. Qualified candidates should have a 2 year Tech degree.6am - 4:30pm. Monday-Thursday; OT Fridays if neededPay $19-25/hour DOEResponsibilities:- Repair non-standard flaws with limited or no assistance- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications - Conduct pre and post inspection on all welded parts- Plan and make difficult or new setups with necessary equipment- Perform preventive maintenance as required- Perform 5S Audits- Perform Safety Stop Audits observations as required- Participate in the CI/PID ProcessResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-Two-year tech school degree or equivalent experience preferred-Minimum 2 years job related experience in a manufacturing environment preferred-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environment -Effective oral and written communication skills-Effective decision making, analytical, and problem solving skills-Ability to effectively interpret blueprints-Ability to organize and prioritize work-Ability to produce quality productsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • West Fargo, North Dakota
        • Temp to Perm
        • $19.44 - $22.44 per hour
        • Various Shifts Available
        Spherion Staffing has 1st & 2nd shift Machinist positions available for a local industrial manufacturing company. This Machinist position will operate a variety of machine tools and equipment to accurately machine final product as well as assist in the development of new products and processes.Qualified applicants must have 2 year degree and at least 4 years' of machining experience.1st shift 6 am - 4:30 pm Mon-Thur2nd Shift 4:15 pm-2:45 am Mon-ThurPay: $19.44/hour plus $3 shift differentialResponsibilities:- Use precision measuring devices to effectively machine parts- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications - Ability to set-up, adjust and perform operations with close tolerance and finish requirements on standardized parts- Conduct pre and post inspection on all machined parts- Plan and make difficult or new setups with necessary equipment - Assist in the development of work instructions- Perform preventive maintenance as requiredResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Two-year tech school degree or equivalent experience preferred-Minimum four years job related experience in a manufacturing environment-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environmentEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing has 1st & 2nd shift Machinist positions available for a local industrial manufacturing company. This Machinist position will operate a variety of machine tools and equipment to accurately machine final product as well as assist in the development of new products and processes.Qualified applicants must have 2 year degree and at least 4 years' of machining experience.1st shift 6 am - 4:30 pm Mon-Thur2nd Shift 4:15 pm-2:45 am Mon-ThurPay: $19.44/hour plus $3 shift differentialResponsibilities:- Use precision measuring devices to effectively machine parts- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications - Ability to set-up, adjust and perform operations with close tolerance and finish requirements on standardized parts- Conduct pre and post inspection on all machined parts- Plan and make difficult or new setups with necessary equipment - Assist in the development of work instructions- Perform preventive maintenance as requiredResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Two-year tech school degree or equivalent experience preferred-Minimum four years job related experience in a manufacturing environment-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environmentEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $14.99 - $15.00 per hour
        • 6:30 AM - 2:30 PM
        Spherion Staffing is interviewing for Rack Assembly/Repair positions with a local manufacturing client. This position will be repairing production racks. Candidates will be operating manual and power tools to complete assigned tasks.Schedule: Monday -Friday 6:30 am-2:30 pmPay $15/hourResponsibilities:- Repair of all production racks, including harp racks, a-frames, bungee racks, and stock racks, and replacing/repairing parts on racks where needed- Help with inventory of rack repair supplies- Communicate in a timely matter when more supplies are needed/entering material needs on a work order- Maintain the appropriate records by recording the results of work done.- Take the initiative to fix flaws in welds or structural imperfections on racksResponsibilities:See aboveWorking hours: 6:30 AM - 2:30 PMSkills:Requirements:-Must be mechanically inclined and able to read a measuring tape-Must be able to stand on feet for extended periods of time-Ability to lift 55#'s on a regular basis-Pre-employment drug test-Criminal BackgroundEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is interviewing for Rack Assembly/Repair positions with a local manufacturing client. This position will be repairing production racks. Candidates will be operating manual and power tools to complete assigned tasks.Schedule: Monday -Friday 6:30 am-2:30 pmPay $15/hourResponsibilities:- Repair of all production racks, including harp racks, a-frames, bungee racks, and stock racks, and replacing/repairing parts on racks where needed- Help with inventory of rack repair supplies- Communicate in a timely matter when more supplies are needed/entering material needs on a work order- Maintain the appropriate records by recording the results of work done.- Take the initiative to fix flaws in welds or structural imperfections on racksResponsibilities:See aboveWorking hours: 6:30 AM - 2:30 PMSkills:Requirements:-Must be mechanically inclined and able to read a measuring tape-Must be able to stand on feet for extended periods of time-Ability to lift 55#'s on a regular basis-Pre-employment drug test-Criminal BackgroundEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Temp to Perm
        • $14.99 - $15.00 per hour
        • 6:30 AM - 6:30 PM
        Spherion Staffing is currently interviewing for 1st shift Production Associates to work with a local manufacturing client. The Production Associate will operate computer automated, high-tech machinery and equipment to produce glass units. Qualified applicants must be able to lift up to 50#'s regularly and have basic computer, math and tape measuring skills.6:30 am to 6:30 pm is 1st shiftPay $15/hour Responsibilities:- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 6:30 AM - 6:30 PMSkills:Requirements:-High school diploma or GED-Previous production/assembly experience preferred-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basisEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is currently interviewing for 1st shift Production Associates to work with a local manufacturing client. The Production Associate will operate computer automated, high-tech machinery and equipment to produce glass units. Qualified applicants must be able to lift up to 50#'s regularly and have basic computer, math and tape measuring skills.6:30 am to 6:30 pm is 1st shiftPay $15/hour Responsibilities:- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 6:30 AM - 6:30 PMSkills:Requirements:-High school diploma or GED-Previous production/assembly experience preferred-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basisEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Fargo, North Dakota
        • Permanent
        • $24.00 - $26.00 per hour
        • 5:00 AM - 3:30 PM
        Spherion Staffing is looking for an experienced Production Lead to coordinate and operate a shift of 10-12 people. The Senior Technical Lead must possess leadership skills along with the technical and problem solving skills to achieve quality and continuous improvement goals. This person must also have the ability to learn, operate, and maintain a variety of machines to manufacture products and parts.Qualified applicants should have leadership and management skills to motivate and give feedback to others.Pay $24-26/hour DOEMonday - Thursday, 5 am to 3:30 pmResponsibilities:- Perform all duties of Shooter, Spray Booth, Router Operator, and Mold Setter positions as needed- Drive safety policy compliance- Inventory storage compliance (raw material and finished goods)- Work order system compliance- Ensure shipment procedures and packaging requirementsResponsibilities:See aboveWorking hours: 5:00 AM - 3:30 PMSkills:Requirements:-3+ years of leading/directing teams-Must have a background in manufacturing, and mechanical aptitude-Prior experience working with fiberglass-Prior forklift experience is a plusEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is looking for an experienced Production Lead to coordinate and operate a shift of 10-12 people. The Senior Technical Lead must possess leadership skills along with the technical and problem solving skills to achieve quality and continuous improvement goals. This person must also have the ability to learn, operate, and maintain a variety of machines to manufacture products and parts.Qualified applicants should have leadership and management skills to motivate and give feedback to others.Pay $24-26/hour DOEMonday - Thursday, 5 am to 3:30 pmResponsibilities:- Perform all duties of Shooter, Spray Booth, Router Operator, and Mold Setter positions as needed- Drive safety policy compliance- Inventory storage compliance (raw material and finished goods)- Work order system compliance- Ensure shipment procedures and packaging requirementsResponsibilities:See aboveWorking hours: 5:00 AM - 3:30 PMSkills:Requirements:-3+ years of leading/directing teams-Must have a background in manufacturing, and mechanical aptitude-Prior experience working with fiberglass-Prior forklift experience is a plusEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

      Thank you for subscribing to your personalized job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.