Thank you for subscribing to your personalized job alerts.

    14 jobs found for Maintenance

    Filter3
    Clear all
      • Winchester, Virginia
      • Temporary
      • $21.00 - $25.00 per hour
      • Various Shifts Available
      $21 + DOEvarious shifts:12 hours - days/nights6a-4p tues-friResponsibilities:Performs any combination of tasks needed to maintain machinery, plumbing, & other physical structures of the facility. Observes & checks mechanical devices through preventative maintenance practices to locate repair or recommend repair to these same equipment items. Dismantles defective equipment units to gain access to defective parts using hoists, power, & hand tools. Performs mechanical tasks as described on work orders. Catalogs machine deficiencies & other items that need repair on the machines being serviced. Performs lubrication tasks as needed for preventative maintenance & fills in for the Lubrication Tech as needed.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma & equivalent is requiredComputer SkillsMinimum of 2 years work experience in industrial repair or maintenance .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      $21 + DOEvarious shifts:12 hours - days/nights6a-4p tues-friResponsibilities:Performs any combination of tasks needed to maintain machinery, plumbing, & other physical structures of the facility. Observes & checks mechanical devices through preventative maintenance practices to locate repair or recommend repair to these same equipment items. Dismantles defective equipment units to gain access to defective parts using hoists, power, & hand tools. Performs mechanical tasks as described on work orders. Catalogs machine deficiencies & other items that need repair on the machines being serviced. Performs lubrication tasks as needed for preventative maintenance & fills in for the Lubrication Tech as needed.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma & equivalent is requiredComputer SkillsMinimum of 2 years work experience in industrial repair or maintenance .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $20.95 per hour
      • 6:00 PM - 6:00 AM
      The Front End Maintainers work 12-hour shifts on for four days and off for four days. There are typically 3 Front End Maintainers on at one time. The Front End Maintainers initiate the can making process. Steel coils are transported by a fork lift to the upender where they are tipped on to their side. They are then transported again by coil car to the unwinder where they are mounted in place. Two Front End Maintainers guide the steel sheet through the lubricator and into the press.From this point the Front End Maintainers are responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.Responsibilities:Duties And Responsibilities:? Inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.? Set-up, maintenance and operation of the upender, unwinder, lubricator, and cupping press.? Set-up maintenance and operation of the body makers, trimmers, and conveying systems.? Inspect and monitor, then enter into computer the following can specifications:? - flange wall thickness - mid-wall thickness? - dome depth - trim can heightWorking hours: 6:00 PM - 6:00 AMSkills:? Perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.? Assist in other areas as needed to maintain smooth can flow through the plant.? Complete required paperwork and documentation such as coil log, check sheets, etc.? Maintain cleanliness of all work areas and machines and practice proper safety procedures.? Performs other job-related duties as required or assigned.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Front End Maintainers work 12-hour shifts on for four days and off for four days. There are typically 3 Front End Maintainers on at one time. The Front End Maintainers initiate the can making process. Steel coils are transported by a fork lift to the upender where they are tipped on to their side. They are then transported again by coil car to the unwinder where they are mounted in place. Two Front End Maintainers guide the steel sheet through the lubricator and into the press.From this point the Front End Maintainers are responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.Responsibilities:Duties And Responsibilities:? Inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.? Set-up, maintenance and operation of the upender, unwinder, lubricator, and cupping press.? Set-up maintenance and operation of the body makers, trimmers, and conveying systems.? Inspect and monitor, then enter into computer the following can specifications:? - flange wall thickness - mid-wall thickness? - dome depth - trim can heightWorking hours: 6:00 PM - 6:00 AMSkills:? Perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.? Assist in other areas as needed to maintain smooth can flow through the plant.? Complete required paperwork and documentation such as coil log, check sheets, etc.? Maintain cleanliness of all work areas and machines and practice proper safety procedures.? Performs other job-related duties as required or assigned.Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $20.95 per hour
      • 6:00 PM - 6:00 AM
      Ensure that all back end equipment from the end of the washer/dryer through the pallet staging area is maintained and operating to produce cans which meet quality specifications.Responsibilities:? Perform set-up and maintenance and ensure efficient operation of the flangers, beaders, light testers, lacquer spray machines, IBOs, palletizer and strappers.?Responsible for the maintenance and set up of all back end conveying, which includes all single filers and can transfer apparatus.?At scheduled intervals, inspect, monitor and document in the computer the following can specifications:-Flanged can height-Factory finished can height-Flange width-Flange angle-Axial load-Panel resistance-Bead depth-Rolling bead diameter and placement-Plug diameter -Oven temperature checks?Perform visual checks of cans to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found.?Complete required paperwork and documentation such as process check sheets, log books, and maintenance check sheets.?Perform Equipment Set-up Evaluations (ESE) and make proper adjustments as required.?Assist in other areas as needed to maintain a smooth flow of cans through the plant.?Maintain cleanliness of all work areas and follow all safety procedures and work practices.?Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:--Strong problem solving skills through an individual and/or collaborative approach--Ability to work independently or with a team--Must be able to look at new solutions and "think outside the box"Education:High SchoolExperience:0-1 yearsQualifications:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements?High School Education/GED ?Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).?Thorough knowledge and understanding of can and end manufacturing process, equipment, and quality specifications.?Ability to demonstrate strong mechanical aptitude on all can and end making equipment in the plant, depending on the primary area of responsibility assigned.?Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions. ?Basic knowledge of computer systems, gauges, tools and equipment.?Ability to safely operate production forklift. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Ensure that all back end equipment from the end of the washer/dryer through the pallet staging area is maintained and operating to produce cans which meet quality specifications.Responsibilities:? Perform set-up and maintenance and ensure efficient operation of the flangers, beaders, light testers, lacquer spray machines, IBOs, palletizer and strappers.?Responsible for the maintenance and set up of all back end conveying, which includes all single filers and can transfer apparatus.?At scheduled intervals, inspect, monitor and document in the computer the following can specifications:-Flanged can height-Factory finished can height-Flange width-Flange angle-Axial load-Panel resistance-Bead depth-Rolling bead diameter and placement-Plug diameter -Oven temperature checks?Perform visual checks of cans to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found.?Complete required paperwork and documentation such as process check sheets, log books, and maintenance check sheets.?Perform Equipment Set-up Evaluations (ESE) and make proper adjustments as required.?Assist in other areas as needed to maintain a smooth flow of cans through the plant.?Maintain cleanliness of all work areas and follow all safety procedures and work practices.?Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:--Strong problem solving skills through an individual and/or collaborative approach--Ability to work independently or with a team--Must be able to look at new solutions and "think outside the box"Education:High SchoolExperience:0-1 yearsQualifications:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements?High School Education/GED ?Advanced mechanical skills (including working knowledge of pneumatics, hydraulics) and ability to use precision measuring devices (calipers, micrometers, dial indicators, etc.).?Thorough knowledge and understanding of can and end manufacturing process, equipment, and quality specifications.?Ability to demonstrate strong mechanical aptitude on all can and end making equipment in the plant, depending on the primary area of responsibility assigned.?Demonstrated involvement in safety and knowledge of safety regulations which apply to work functions. ?Basic knowledge of computer systems, gauges, tools and equipment.?Ability to safely operate production forklift. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Gainesville, Georgia
      • Temporary
      • $16.00 - $17.00 per hour
      • 5:00 PM - 3:30 AM
      GENERAL DESCRIPTION: (This position includes, but is not limited to the following duties and responsibilities)Responsiblities:? Know and apply the LaserCraft Quality Policy.? Daily Maintenance and cleaning on the saw as required? Adhere to all guidelines and safety regulations set forth in the Employee Handbook.? Reports any material damage or discrepancies to Quality Department? Understands the functions of saws ( set up, loading and operation)? Knows the differences between material types, sizes and shapesAuthorities:? To stop work and request additional information from Management, Sales or Customers.? Initiate and Implement Corrective and Preventive Actions.? Initiate NCR reports for any non-conformance.? To stop the execution of any unsafe act or any act that violates the LaserCraft?s Safety program? To control or limit access to the facility by anyone not employed by LaserCraft.Responsibilities:Responsible for all saw cutting of structural materials. Responsible for safe operation and maintenance of saw. Responsible for local housekeeping of the saw area. Responsible to represent the company in a professional manner at all times andadhere to safety guidelines and handbook policies.Working hours: 5:00 PM - 3:30 AMSkills:Accurately record time in ProfitFab for work performed.-Accurately cut assigned jobs in a timely manner-Understands the need for overtime at certain peak periods-Cleaning and maintain local area around saw-All other duties as assignedEducation:No Degree RequiredExperience:1-4 yearsQualifications:Few years experience Call or text (770)-531-7900 for more informationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      GENERAL DESCRIPTION: (This position includes, but is not limited to the following duties and responsibilities)Responsiblities:? Know and apply the LaserCraft Quality Policy.? Daily Maintenance and cleaning on the saw as required? Adhere to all guidelines and safety regulations set forth in the Employee Handbook.? Reports any material damage or discrepancies to Quality Department? Understands the functions of saws ( set up, loading and operation)? Knows the differences between material types, sizes and shapesAuthorities:? To stop work and request additional information from Management, Sales or Customers.? Initiate and Implement Corrective and Preventive Actions.? Initiate NCR reports for any non-conformance.? To stop the execution of any unsafe act or any act that violates the LaserCraft?s Safety program? To control or limit access to the facility by anyone not employed by LaserCraft.Responsibilities:Responsible for all saw cutting of structural materials. Responsible for safe operation and maintenance of saw. Responsible for local housekeeping of the saw area. Responsible to represent the company in a professional manner at all times andadhere to safety guidelines and handbook policies.Working hours: 5:00 PM - 3:30 AMSkills:Accurately record time in ProfitFab for work performed.-Accurately cut assigned jobs in a timely manner-Understands the need for overtime at certain peak periods-Cleaning and maintain local area around saw-All other duties as assignedEducation:No Degree RequiredExperience:1-4 yearsQualifications:Few years experience Call or text (770)-531-7900 for more informationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Frederick, Maryland
      • Temporary
      • $13.00 - $14.00 per hour
      • Various Shifts Available
      Production Associate Comfortable to work in a direct coach-able environment.Standing up bottles for accurate processing through machines Will train into working a machine.Prefer someone mechanically inclined to train into maintenance mechanic position upon hire.Working Monday-Friday, some Saturdays as well; expect up to 12 hour shifts, MUST be comfortable to work some Saturdays as well.Work in a loud environment.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:AssemblyEducation:No Degree RequiredExperience:0-1 yearsQualifications:Assembly (301)694-7700 - ApplySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Production Associate Comfortable to work in a direct coach-able environment.Standing up bottles for accurate processing through machines Will train into working a machine.Prefer someone mechanically inclined to train into maintenance mechanic position upon hire.Working Monday-Friday, some Saturdays as well; expect up to 12 hour shifts, MUST be comfortable to work some Saturdays as well.Work in a loud environment.Responsibilities:AssemblyWorking hours: Various Shifts AvailableSkills:AssemblyEducation:No Degree RequiredExperience:0-1 yearsQualifications:Assembly (301)694-7700 - ApplySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $16.77 per hour
      • 6:00 AM - 6:00 PM
      POSITION OVERVIEW:To provide operational assistance and relief to Back End personnel, including Palletizer Operator, LSM Operator and Back End Maintainer.Responsibilities:DUTIES AND RESPONSIBILITIES:?Assist in set-up and maintenance and operation of the flangers, beaders, light testers, spray machines, IBO?s and palletizer.?Assist operators with can quality checks.?Operate Palletizer, LSM?s, and Back End equipment in the absence of other Back End Operators & Maintainers.?Perform quality checks in LSM area while LSM Operator performs daily cleaning of LSM machines.?Perform visual checks of cans to ensure entire process is in compliance and take appropriate measure to correct the process when deficiencies are found.?Complete required paperwork and documentation such as process check sheets, logbooks, and maintenance check sheets.?Assist in other areas as needed to maintain a smooth flow of cans through the plant.?Maintain cleanliness of all work areas and follow all safety procedures and work practices ?Performs other job-related duties as required or assignedWorking hours: 6:00 AM - 6:00 PMSkills:QUALIFICATIONS:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements? Basic mechanical skills.? Ability to read, understand and comply with SOP?s.? Basic data entry and computer.? Ability to safely operate production forklift and maintain certification.? Thorough knowledge and understanding of quality can specifications.? Basic understanding of entire can making process.? Knowledge of safety regulations that apply to work functions. ? High School Education/GEDEducation:High SchoolExperience:0-1 yearsQualifications:Preferred Requirements? Competencies? Strong problem solving skills through an individual and/or collaborative approach? Ability to work independently or with a team? Must be able to look at new solutions and ?think outside the box? Physical Requirements:? While performing the duties of this job, the Team Member is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl. ? The Team Member may lift and/or move up to 10 pounds. ? Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus.Working Conditions:? Generally works in a plant environment but may be required to perform some job duties inside a typical office setting. ? While performing the duties of this job, the Team Member may be exposed to moving mechanical parts and vehicular traffic. ? The Team Member may be exposed to a wide range of temperatures. ? The noise level is frequently loud.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      POSITION OVERVIEW:To provide operational assistance and relief to Back End personnel, including Palletizer Operator, LSM Operator and Back End Maintainer.Responsibilities:DUTIES AND RESPONSIBILITIES:?Assist in set-up and maintenance and operation of the flangers, beaders, light testers, spray machines, IBO?s and palletizer.?Assist operators with can quality checks.?Operate Palletizer, LSM?s, and Back End equipment in the absence of other Back End Operators & Maintainers.?Perform quality checks in LSM area while LSM Operator performs daily cleaning of LSM machines.?Perform visual checks of cans to ensure entire process is in compliance and take appropriate measure to correct the process when deficiencies are found.?Complete required paperwork and documentation such as process check sheets, logbooks, and maintenance check sheets.?Assist in other areas as needed to maintain a smooth flow of cans through the plant.?Maintain cleanliness of all work areas and follow all safety procedures and work practices ?Performs other job-related duties as required or assignedWorking hours: 6:00 AM - 6:00 PMSkills:QUALIFICATIONS:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements? Basic mechanical skills.? Ability to read, understand and comply with SOP?s.? Basic data entry and computer.? Ability to safely operate production forklift and maintain certification.? Thorough knowledge and understanding of quality can specifications.? Basic understanding of entire can making process.? Knowledge of safety regulations that apply to work functions. ? High School Education/GEDEducation:High SchoolExperience:0-1 yearsQualifications:Preferred Requirements? Competencies? Strong problem solving skills through an individual and/or collaborative approach? Ability to work independently or with a team? Must be able to look at new solutions and ?think outside the box? Physical Requirements:? While performing the duties of this job, the Team Member is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl. ? The Team Member may lift and/or move up to 10 pounds. ? Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus.Working Conditions:? Generally works in a plant environment but may be required to perform some job duties inside a typical office setting. ? While performing the duties of this job, the Team Member may be exposed to moving mechanical parts and vehicular traffic. ? The Team Member may be exposed to a wide range of temperatures. ? The noise level is frequently loud.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Butte, Montana
      • Temporary
      • $20.81 per hour
      • 5:00 AM - 3:30 PM
      Positions working in a leading edge poly silicon clean room manufacturing environment in Butte, Montana. Experience working in an industrial, Safety First culture. Ability to work with production machinery and quality control in the handling, shipping and packaging of product. Shifts are days, 4 ten hour shifts worked Monday through Thursday and Tuesday through Friday. Overtime hours are determined by production schedules and deadlines. Positions are temporary to meet production goals with possibility for long term depending on performance and position availability. Opportunity to work with a well established global manufacturing company. Excellent training and Holiday pay rate paid to contract employees for holidays worked and designated by company. Shifts are day rotations, 4 - 10 hour shifts. Monday through Friday or Tuesday through Friday - 5:00 AM - 3:30 PM.Responsibilities:Responsible for the safe operation of manufacturing machinery and equipment. Following protocols for safe handling production and packaging of product with compliance with all safety and quality control standards. Position is responsible for the inspection and documentation of inventory and production.Working hours: 5:00 AM - 3:30 PMSkills:Basic computer skills including functionality of Microsoft Office - Excel and Word. Ability to read and interpret documents for operations and safety, maintenance and inventory. Math aptitude in the areas of measurement, percentages, using whole numbers, common fractions and decimals. Seeking team players who work well in a team, exhibiting excellent communication skills, both verbal and written. Physical demands: ability to walk, stoop, stretch, stand for prolonged periods.of time. Close visual acuity required for monitoring valves and gauges. Lifting up to fifty (50) pounds.Education:No Degree RequiredExperience:1-4 yearsQualifications:Candidates must have equivalent experience in the areas that are illustrated. Expanded experience in an industrial setting.. Pre-employment: criminal background check, drug screen, physical assessment. Three (3) work related references. To be considered, go to spherion.com/Apply and attach a detailed resume. For questions or assistance, contact the local Spherion Staffing and Recruiting office in Butte, Montana at 406-782-1130 or visit us at 1015 A. South Montana Street, Butte Montana. Inquiry: KathyHenningsen@spherion.com Let's Get To Work!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Positions working in a leading edge poly silicon clean room manufacturing environment in Butte, Montana. Experience working in an industrial, Safety First culture. Ability to work with production machinery and quality control in the handling, shipping and packaging of product. Shifts are days, 4 ten hour shifts worked Monday through Thursday and Tuesday through Friday. Overtime hours are determined by production schedules and deadlines. Positions are temporary to meet production goals with possibility for long term depending on performance and position availability. Opportunity to work with a well established global manufacturing company. Excellent training and Holiday pay rate paid to contract employees for holidays worked and designated by company. Shifts are day rotations, 4 - 10 hour shifts. Monday through Friday or Tuesday through Friday - 5:00 AM - 3:30 PM.Responsibilities:Responsible for the safe operation of manufacturing machinery and equipment. Following protocols for safe handling production and packaging of product with compliance with all safety and quality control standards. Position is responsible for the inspection and documentation of inventory and production.Working hours: 5:00 AM - 3:30 PMSkills:Basic computer skills including functionality of Microsoft Office - Excel and Word. Ability to read and interpret documents for operations and safety, maintenance and inventory. Math aptitude in the areas of measurement, percentages, using whole numbers, common fractions and decimals. Seeking team players who work well in a team, exhibiting excellent communication skills, both verbal and written. Physical demands: ability to walk, stoop, stretch, stand for prolonged periods.of time. Close visual acuity required for monitoring valves and gauges. Lifting up to fifty (50) pounds.Education:No Degree RequiredExperience:1-4 yearsQualifications:Candidates must have equivalent experience in the areas that are illustrated. Expanded experience in an industrial setting.. Pre-employment: criminal background check, drug screen, physical assessment. Three (3) work related references. To be considered, go to spherion.com/Apply and attach a detailed resume. For questions or assistance, contact the local Spherion Staffing and Recruiting office in Butte, Montana at 406-782-1130 or visit us at 1015 A. South Montana Street, Butte Montana. Inquiry: KathyHenningsen@spherion.com Let's Get To Work!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temporary
      • $16.75 per hour
      • 4:00 PM - 1:00 AM
      Look at us over here filling allllllll of the 2nd shift positions--great hours, competative pay, awesome right? We have a client in need of assembly workers right here in Mankato. Oh, you don't have experience with assembly? That is OKAY! This client is willing to train, bright, motivated individuals likes yourself, so have no fear!(4) 10 hour shifts Monday - Thursday; take Fridays off!Responsibilities:Performs assembly on assigned products using machinery and/or tools as well as correct production methods to ensure accuracy and quality of finished products. Maintains production output levels consistent with set standards. May perform testing, quality inspections and reworking of deficient components and/or finished products to ensure efficient operation.Ability to read and utilize work orders in the production process. Informs management on issues related to quality, production, and/or safety which may adversely impact meeting the areas goals. Manages parts bin quantities and notifies the production supervisor or lead person when quantities are low or insufficient to maintain production.Documents actions by completing required production and quality forms.Maintains a clean and safe work area by complying with company procedures.Monitors machinery and advises maintenance of necessary repairs.Performs other duties as assigned.Working hours: 4:00 PM - 1:00 AMSkills:Good attendanceAssembly experience is a plus, but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand for 8 hours APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Look at us over here filling allllllll of the 2nd shift positions--great hours, competative pay, awesome right? We have a client in need of assembly workers right here in Mankato. Oh, you don't have experience with assembly? That is OKAY! This client is willing to train, bright, motivated individuals likes yourself, so have no fear!(4) 10 hour shifts Monday - Thursday; take Fridays off!Responsibilities:Performs assembly on assigned products using machinery and/or tools as well as correct production methods to ensure accuracy and quality of finished products. Maintains production output levels consistent with set standards. May perform testing, quality inspections and reworking of deficient components and/or finished products to ensure efficient operation.Ability to read and utilize work orders in the production process. Informs management on issues related to quality, production, and/or safety which may adversely impact meeting the areas goals. Manages parts bin quantities and notifies the production supervisor or lead person when quantities are low or insufficient to maintain production.Documents actions by completing required production and quality forms.Maintains a clean and safe work area by complying with company procedures.Monitors machinery and advises maintenance of necessary repairs.Performs other duties as assigned.Working hours: 4:00 PM - 1:00 AMSkills:Good attendanceAssembly experience is a plus, but not requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand for 8 hours APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temporary
      • $16.50 - $19.00 per hour
      • 6:00 AM - 2:00 PM (Various Shifts Available)
      JOBS ON JOBS ON JOBS; we have them all, and this oppotunity is no exception! Spherion has partnered with TAYLOR to fill some long-term machine operating positions right in North Mankato. These positions offer FT hours, plus overtime AND long-term opportunity. Sounds good right? Then apply!Shifts are:1st Shift; Monday - Friday 6AM-2PM2nd Shift; Monday - Friday 2PM-10PM3rd Shift; Sunday-Thursday 10PM-6AMResponsibilities:Prepare and operate printing press equipment, in compliance with job specifications and in accordance with company quality standards and procedures.Performs daily/weekly/monthly maintenance on equipment to ensure optimum output.Prepare inks for proper color and consistency.Check paper for type, size, color and quantity.Check plates for correct format.Visually inspect forms throughout run for quality.Coordinate with Production Team to produce and prioritize jobs, and when necessary reorganize to meet deadline changes and updates.Maintain knowledge of safety requirements of job and equipment.Working hours: 6:00 AM - 2:00 PM (Various Shifts Available)Skills:Ability to respond to continually changing priorities and coordinate multiple projectsPerform a variety of tasks throughout the day in a fast paced work environmentAbility to work in a team environment toward a common goalA service-oriented individual with a high energy, positive and friendly demeanorMaintains a pattern of regular and predictable attendanceProficient in reading, speaking, and understanding the English LanguageAbility to follow written and verbal directionsHas mechanical aptitudeEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or GED Don't wait; apply for this position today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      JOBS ON JOBS ON JOBS; we have them all, and this oppotunity is no exception! Spherion has partnered with TAYLOR to fill some long-term machine operating positions right in North Mankato. These positions offer FT hours, plus overtime AND long-term opportunity. Sounds good right? Then apply!Shifts are:1st Shift; Monday - Friday 6AM-2PM2nd Shift; Monday - Friday 2PM-10PM3rd Shift; Sunday-Thursday 10PM-6AMResponsibilities:Prepare and operate printing press equipment, in compliance with job specifications and in accordance with company quality standards and procedures.Performs daily/weekly/monthly maintenance on equipment to ensure optimum output.Prepare inks for proper color and consistency.Check paper for type, size, color and quantity.Check plates for correct format.Visually inspect forms throughout run for quality.Coordinate with Production Team to produce and prioritize jobs, and when necessary reorganize to meet deadline changes and updates.Maintain knowledge of safety requirements of job and equipment.Working hours: 6:00 AM - 2:00 PM (Various Shifts Available)Skills:Ability to respond to continually changing priorities and coordinate multiple projectsPerform a variety of tasks throughout the day in a fast paced work environmentAbility to work in a team environment toward a common goalA service-oriented individual with a high energy, positive and friendly demeanorMaintains a pattern of regular and predictable attendanceProficient in reading, speaking, and understanding the English LanguageAbility to follow written and verbal directionsHas mechanical aptitudeEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or GED Don't wait; apply for this position today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $17.08 per hour
      • 6:00 AM - 2:30 PM
      End line operator, responsible for packaging can ends as they come off the production line. May use a forklift to move product around the warehouse.Responsibilities:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PMSkills:1.-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.-End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8- hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:High SchoolExperience:0-1 yearsQualifications:???Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently???Stand, twist, bend and rotate ??? continuously, Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      End line operator, responsible for packaging can ends as they come off the production line. May use a forklift to move product around the warehouse.Responsibilities:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PMSkills:1.-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.-End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8- hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:High SchoolExperience:0-1 yearsQualifications:???Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently???Stand, twist, bend and rotate ??? continuously, Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temporary
      • $15.50 per hour
      • 2:30 PM - 11:00 PM
      POSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:ESSENTIAL FUNCTIONS:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:30 PM - 11:00 PMSkills:REQUIRED KNOWLEDGE/SKILLS: 1. Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2. Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3. End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8? hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:High SchoolExperience:0-1 yearsQualifications:PHYSICAL DEMANDS: 1. Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently. Stand, twist, bend and rotate continuously. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      POSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:ESSENTIAL FUNCTIONS:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 2:30 PM - 11:00 PMSkills:REQUIRED KNOWLEDGE/SKILLS: 1. Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2. Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3. End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8? hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:High SchoolExperience:0-1 yearsQualifications:PHYSICAL DEMANDS: 1. Ability to lift and carry up to 8.5lbs from floor to 60 inches-frequently. Stand, twist, bend and rotate continuously. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Temporary
      • $25.00 - $26.00 per hour
      • 2:00 PM - 10:00 PM
      Spherion Staffing has an Electronics Testing Technician position with John Deere in Fargo. This position will perform electrical/ mechanical testing, design validation, and verification of electronic or electro-mechanical equipment and products.Qualified candidates should have an A.S. in Electronics or a two-year technical diploma, and hands-on SMT soldering experience2nd shift 2 pm-10 pmPay $25-26/hour DOE All applicants must be legally authorized to work in the U.S. without sponsorshipResponsibilities: - Perform intermediate validation testing on prototypes and existing products- Work with Engineering to understand and apply defined test requirements - Troubleshoot defective lab equipment and provide required maintenance as needed Build intermediate test harnesses, loads, and circuit boards to support product verification as required- Document and maintain records relating to work performed- Inform supervisor of process, test, or design problems and assist in the corrective action- Assemble (mechanical/electrical) fixtures and test setups as required. This will require performing intermediate design functions- Perform inspection, test, and failure analysis as necessary to determine cause of defective tests or assemblies- Conduct functional test of electronic circuits and PCBs according to engineering instructions- Create test documentation when required for prototype products - Design basic engineering test boxesResponsibilities:See aboveWorking hours: 2:00 PM - 10:00 PMSkills:Requirements: -A.S. in Electronics or a two-year technical diploma, equivalent military certification or equivalent experience-Minimum of one year of related experience in electronics, manufacturing, or engineering-Hands-on SMT soldering experience-Must possess effective written and verbal communication skills-Working knowledge of computers, spreadsheets, and word processing-Understanding of manufacturing processes and electronic components-Knowledge of test equipment, e.g., multimeters, oscilloscopes, etc-Understanding of trouble shooting methodologies to identify root cause-Ability to read basic engineering documents-Ability to comprehend product/process component datasheets-Ability to assemble and disassemble products-Looking for candidates that can troubleshoot boards down to the component levelEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Tefehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has an Electronics Testing Technician position with John Deere in Fargo. This position will perform electrical/ mechanical testing, design validation, and verification of electronic or electro-mechanical equipment and products.Qualified candidates should have an A.S. in Electronics or a two-year technical diploma, and hands-on SMT soldering experience2nd shift 2 pm-10 pmPay $25-26/hour DOE All applicants must be legally authorized to work in the U.S. without sponsorshipResponsibilities: - Perform intermediate validation testing on prototypes and existing products- Work with Engineering to understand and apply defined test requirements - Troubleshoot defective lab equipment and provide required maintenance as needed Build intermediate test harnesses, loads, and circuit boards to support product verification as required- Document and maintain records relating to work performed- Inform supervisor of process, test, or design problems and assist in the corrective action- Assemble (mechanical/electrical) fixtures and test setups as required. This will require performing intermediate design functions- Perform inspection, test, and failure analysis as necessary to determine cause of defective tests or assemblies- Conduct functional test of electronic circuits and PCBs according to engineering instructions- Create test documentation when required for prototype products - Design basic engineering test boxesResponsibilities:See aboveWorking hours: 2:00 PM - 10:00 PMSkills:Requirements: -A.S. in Electronics or a two-year technical diploma, equivalent military certification or equivalent experience-Minimum of one year of related experience in electronics, manufacturing, or engineering-Hands-on SMT soldering experience-Must possess effective written and verbal communication skills-Working knowledge of computers, spreadsheets, and word processing-Understanding of manufacturing processes and electronic components-Knowledge of test equipment, e.g., multimeters, oscilloscopes, etc-Understanding of trouble shooting methodologies to identify root cause-Ability to read basic engineering documents-Ability to comprehend product/process component datasheets-Ability to assemble and disassemble products-Looking for candidates that can troubleshoot boards down to the component levelEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Tefehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temporary
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temporary
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:All duties of a Laboratory Aide and Technician I as needed Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time Conducts and documents testing within prescribed timeframe, as per designated SOP's Maintain the various lab databases Maintain raw material skip lot testing program Assist in conducting complex standardized lab test methods according to established protocols and methods Assist in simple instrument maintenance and repair Assist in preparation of test solutions, reagents and chemical compounds Assist in the stability testing program Report analytical results according to sample reporting requirements Release raw materials for production use Work in a team environment with only minimal supervision? Conduct basic standardized lab tests Assist in ordering laboratory equipment, supplies, standards and reagents Train and provide technical assistance to laboratory personnel as required Assist in performing basic mathematical and statistical analyses of results Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training Track and analyze samples for microbial growth Prepare media, plates, and conduct sample destruction in the microbiology lab Other duties as assignedWorking hours: 6:00 PM - 6:30 AMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word) Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing. Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.