You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    53 Permanent Manufacturing & Production found

    Filter3
    Clear all
      • Marion, New York
      • Permanent
      • $28.00 - $32.00 per hour
      • 6:00 PM - 6:00 AM
      Due to rapid growth, we are seeking a 2nd shift Maintenance Electrician for a manufacturer of farm fresh goodness that provide a wide range of nutritious fruit and vegetable products. This is a union shop with excellent benefits!We are hiring an electrician responsible for all electrical maintenance, repair and fabrication for a food manufacturer with one of the most highly integrated processing systems in the United States. This is a permanent direct hire position. Hours are 6 pm - 6 am , training would be on 1st shift. Union shop with excellent benefits.Responsibilities:Maintains, installs, rebuilds, and repairs equipment per specifications.Troubleshoot and repair electrical wiring, PLC's, controllers, lighting controls,and electrical motors in a production environment.Maintains cost control for equipment and supplies for budget.Assure safety rules and regulations are being followed and enforced.Stay current on electrical codes and OSHA regulations.Plan new or modified installations to minimize waste of materials.Maintains general housekeeping.Good working knowledge of electronics, programmable logic controllers and their applicationsOther duties as required and assigned by Management.Frequent exposure to moving mechanical parts, noise, and forklift traffic.Indoor and Outdoor weather, hot, cold, wet, and humid conditions.Exposure to chemicals and nuisance dusts.Bump hat, eye and ear protection, hair net. Other safety equipment as necessary.The employee is responsible for following safety rules and regulations.Working hours: 6:00 PM - 6:00 AMSkills:Maintains, installs, rebuilds, and repairs equipment per specifications.Troubleshoot and repair electrical wiring, PLC's, controllers, lighting controls,and electrical motors in a production environment.Maintains cost control for equipment and supplies for budget.Assure safety rules and regulations are being followed and enforced.Stay current on electrical codes and OSHA regulations.Plan new or modified installations to minimize waste of materials.Maintains general housekeeping.Good working knowledge of electronics, programmable logic controllers and their applicationsOther duties as required and assigned by Management.Frequent exposure to moving mechanical parts, noise, and forklift traffic.Indoor and Outdoor weather, hot, cold, wet, and humid conditions.Exposure to chemicals and nuisance dusts.Bump hat, eye and ear protection, hair net. Other safety equipment as necessary.The employee is responsible for following safety rules and regulations.Education:High SchoolExperience:1-4 yearsQualifications:Good communication skills.Ability to read and write the English languageWillingness and ability to work in a team environment.Extensive electrical aptitude.Two to Three year vocational certificate.One to Three years of prior electrical experience.Must be able to sit, stand, reach, push, pull, twist, squat, bend, climb and lift up to 50 pounds.Ability to work at heights, climb ladders and do repetitive motions.Occasional ability to lift up to 100 pounds.Flexibility for maneuvering to fix, maintain, and process equipment. some electric experience with pneumatics requiredSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by
      Due to rapid growth, we are seeking a 2nd shift Maintenance Electrician for a manufacturer of farm fresh goodness that provide a wide range of nutritious fruit and vegetable products. This is a union shop with excellent benefits!We are hiring an electrician responsible for all electrical maintenance, repair and fabrication for a food manufacturer with one of the most highly integrated processing systems in the United States. This is a permanent direct hire position. Hours are 6 pm - 6 am , training would be on 1st shift. Union shop with excellent benefits.Responsibilities:Maintains, installs, rebuilds, and repairs equipment per specifications.Troubleshoot and repair electrical wiring, PLC's, controllers, lighting controls,and electrical motors in a production environment.Maintains cost control for equipment and supplies for budget.Assure safety rules and regulations are being followed and enforced.Stay current on electrical codes and OSHA regulations.Plan new or modified installations to minimize waste of materials.Maintains general housekeeping.Good working knowledge of electronics, programmable logic controllers and their applicationsOther duties as required and assigned by Management.Frequent exposure to moving mechanical parts, noise, and forklift traffic.Indoor and Outdoor weather, hot, cold, wet, and humid conditions.Exposure to chemicals and nuisance dusts.Bump hat, eye and ear protection, hair net. Other safety equipment as necessary.The employee is responsible for following safety rules and regulations.Working hours: 6:00 PM - 6:00 AMSkills:Maintains, installs, rebuilds, and repairs equipment per specifications.Troubleshoot and repair electrical wiring, PLC's, controllers, lighting controls,and electrical motors in a production environment.Maintains cost control for equipment and supplies for budget.Assure safety rules and regulations are being followed and enforced.Stay current on electrical codes and OSHA regulations.Plan new or modified installations to minimize waste of materials.Maintains general housekeeping.Good working knowledge of electronics, programmable logic controllers and their applicationsOther duties as required and assigned by Management.Frequent exposure to moving mechanical parts, noise, and forklift traffic.Indoor and Outdoor weather, hot, cold, wet, and humid conditions.Exposure to chemicals and nuisance dusts.Bump hat, eye and ear protection, hair net. Other safety equipment as necessary.The employee is responsible for following safety rules and regulations.Education:High SchoolExperience:1-4 yearsQualifications:Good communication skills.Ability to read and write the English languageWillingness and ability to work in a team environment.Extensive electrical aptitude.Two to Three year vocational certificate.One to Three years of prior electrical experience.Must be able to sit, stand, reach, push, pull, twist, squat, bend, climb and lift up to 50 pounds.Ability to work at heights, climb ladders and do repetitive motions.Occasional ability to lift up to 100 pounds.Flexibility for maneuvering to fix, maintain, and process equipment. some electric experience with pneumatics requiredSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by
      • Pelion, South Carolina
      • Permanent
      • $50,000 - $66,000 per year
      • 8:00 AM - 5:00 PM
      Spherion is seeking a Maintenance Planner for our client in the Lexington area. This role offers the opportunity to manage inventory, schedule work orders, and plan/initiate regular maintenance on machinery.Responsibilities:- Manage inventory to ensure parts, supplies, and materials are available when needed- Identify safety and reliability benchmarks- Establish preventative maintenance schedules- Create work orders for installs, repairs, and other projects - Maintain invoices, orders, accounting, and contractor workWorking hours: 8:00 AM - 5:00 PMSkills:- Excellent computer skills- Micromain experience preferred- Adept at delivering pre-job and safety briefings- Spanish skills are a plusEducation:High SchoolExperience:1-4 yearsQualifications:- High School Diploma or equivalent- 5+ years in mechanical, electrical, I&C, or multidisciplinary industrial maintenance- 2+ years of project management experience- 2+ years of maintenance or work order experience Apply today for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is seeking a Maintenance Planner for our client in the Lexington area. This role offers the opportunity to manage inventory, schedule work orders, and plan/initiate regular maintenance on machinery.Responsibilities:- Manage inventory to ensure parts, supplies, and materials are available when needed- Identify safety and reliability benchmarks- Establish preventative maintenance schedules- Create work orders for installs, repairs, and other projects - Maintain invoices, orders, accounting, and contractor workWorking hours: 8:00 AM - 5:00 PMSkills:- Excellent computer skills- Micromain experience preferred- Adept at delivering pre-job and safety briefings- Spanish skills are a plusEducation:High SchoolExperience:1-4 yearsQualifications:- High School Diploma or equivalent- 5+ years in mechanical, electrical, I&C, or multidisciplinary industrial maintenance- 2+ years of project management experience- 2+ years of maintenance or work order experience Apply today for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $17.25 - $26.00 per hour
      • 7:00 AM - 3:30 PM (Various Shifts Available)
      PRODUCTION TEAM MEMBERS NEEDED!$1,500 SPOT & STAY BONUSESAPPLY TODAY and be DIRECTLY HIRED for any of the following positions on 1st, 2nd, 3rd shifts available. ASSEMBLY, MACHINE OPERATOR, SHIPPING AND RECEIVING, TRUCK DRIVERS, MAINTENANCEResponsibilities:Assembly & Coating Line Operators (Parts Hangers) Forklift drivers Punch Press & Die Cast Machine Operators Maintenance Mechanics Tool & Die SHIFT DIFFERENTIALS FOR 2nd & 3rd SHIFT BENEFITS: PAID TIME OFF, HEALTH BENEFITS, EDUCATION & FITNESS REIMBURSEMENT, SAFETY GLASSES & SHOE REIMBURSEMENT.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:WILL TRAIN but previous experience in machine operation, forklift, assembly and maintenance is a Preferred.Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience preferred APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      PRODUCTION TEAM MEMBERS NEEDED!$1,500 SPOT & STAY BONUSESAPPLY TODAY and be DIRECTLY HIRED for any of the following positions on 1st, 2nd, 3rd shifts available. ASSEMBLY, MACHINE OPERATOR, SHIPPING AND RECEIVING, TRUCK DRIVERS, MAINTENANCEResponsibilities:Assembly & Coating Line Operators (Parts Hangers) Forklift drivers Punch Press & Die Cast Machine Operators Maintenance Mechanics Tool & Die SHIFT DIFFERENTIALS FOR 2nd & 3rd SHIFT BENEFITS: PAID TIME OFF, HEALTH BENEFITS, EDUCATION & FITNESS REIMBURSEMENT, SAFETY GLASSES & SHOE REIMBURSEMENT.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:WILL TRAIN but previous experience in machine operation, forklift, assembly and maintenance is a Preferred.Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience preferred APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Columbia, South Carolina
      • Permanent
      • $25.00 - $30.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion is partnering with a multi-national manufacturing client in search of a Maintenance Tech (Direct Hire). This role offers a great pay and benefits package and a well-established company culture.Responsibilities:- Install, maintain, and repair automated machinery - Utilize test instruments to measure performance of electro-mechanical assemblies- Create housings, fixtures, and fittings using metalworking machines - Determine quality of parts by observing any surface defects and confirming dimensions to ensure specifications are met- Operate soldering equipment and small tools to install electronic parts and hardwareWorking hours: 8:00 AM - 5:00 PMSkills:- Able to perform basic computer tasks- Clear and effective communication skillsEducation:AssociateExperience:0-1 yearsQualifications:- Associate's degree or postsecondary electromechanical technician certificate - Demonstrated understanding of maintenance/electromechanical concepts a plus Apply today for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is partnering with a multi-national manufacturing client in search of a Maintenance Tech (Direct Hire). This role offers a great pay and benefits package and a well-established company culture.Responsibilities:- Install, maintain, and repair automated machinery - Utilize test instruments to measure performance of electro-mechanical assemblies- Create housings, fixtures, and fittings using metalworking machines - Determine quality of parts by observing any surface defects and confirming dimensions to ensure specifications are met- Operate soldering equipment and small tools to install electronic parts and hardwareWorking hours: 8:00 AM - 5:00 PMSkills:- Able to perform basic computer tasks- Clear and effective communication skillsEducation:AssociateExperience:0-1 yearsQualifications:- Associate's degree or postsecondary electromechanical technician certificate - Demonstrated understanding of maintenance/electromechanical concepts a plus Apply today for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Ridgeway, South Carolina
      • Permanent
      • $60,000 - $70,000 per year
      • 8:00 AM - 5:00 PM
      Our client, a Tier 1 automotive manufacturer, is seeking a Maintenance Supervisor in the Columbia, SC area. This is a key role that offers excellent pay and benefits, a strong work-life balance, and the opportunity to manage daily operations which includes inventory management, equipment procurement, and other maintenance responsibilities.Responsibilities:- Implement maintenance procedures to ensure budgetary requirements are met - Manage maintenance personnel by creating schedules and establishing prioritization of needs- Maintain department budget, parts inventory, purchase orders, and invoice approvals- Develop preventative maintenance plans to demonstrate an effort of maintenance and reliability initiatives - Collaborate cross-functionally with manufacturers, line integrators, and engineers to create spare parts list based on part criticality - Maintain quality and safety standardsWorking hours: 8:00 AM - 5:00 PMSkills:- Sound knowledge of mechanical, hydraulic, and electrical engineering concepts - Excellent communication and leadership skills- Proven ability to make decisions using problem-solving skillsEducation:BachelorsExperience:4-7 yearsQualifications:- Bachelor's degree required- 10+ years in maintenance management role - Experience with AM/PM and TPM programs Apply today for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client, a Tier 1 automotive manufacturer, is seeking a Maintenance Supervisor in the Columbia, SC area. This is a key role that offers excellent pay and benefits, a strong work-life balance, and the opportunity to manage daily operations which includes inventory management, equipment procurement, and other maintenance responsibilities.Responsibilities:- Implement maintenance procedures to ensure budgetary requirements are met - Manage maintenance personnel by creating schedules and establishing prioritization of needs- Maintain department budget, parts inventory, purchase orders, and invoice approvals- Develop preventative maintenance plans to demonstrate an effort of maintenance and reliability initiatives - Collaborate cross-functionally with manufacturers, line integrators, and engineers to create spare parts list based on part criticality - Maintain quality and safety standardsWorking hours: 8:00 AM - 5:00 PMSkills:- Sound knowledge of mechanical, hydraulic, and electrical engineering concepts - Excellent communication and leadership skills- Proven ability to make decisions using problem-solving skillsEducation:BachelorsExperience:4-7 yearsQualifications:- Bachelor's degree required- 10+ years in maintenance management role - Experience with AM/PM and TPM programs Apply today for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Detroit Lakes, Minnesota
      • Permanent
      • $24.00 - $26.00 per hour
      • Various Shifts Available
      Are you good at troubleshooting? Do you have a background in maintaining and repairing machines? Spherion Staffing currently has an opening for maintenance technician in the manufacturing industry. This is a direct hire opportunity with benefits available.Responsibilities:- Work with operations to ensure plant equipment is operating when necessary, through diagnosis, troubleshooting, and repair. Issues may be mechanical or electrical.- Perform preventative maintenance on all plant equipment to ensure maximum productivity.- Work with operations to focus on improving productivity through the use of improvements in machines, materials, or processes.- Install and troubleshoot any new equipment as directed.- Repairs die lubrication systems- Clean/Lubricate shafts, bearings, gears, and other machinery- Fabricate equipment to meet maintenance requirements.- Change filers and fluids as needed- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Ability to read and interpret blueprints- Welding and soldering experience- Experience installing and repairing equipment, such as small electrical components- Team player- Manual dexterity- Experience using power toolsEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to stand 8-10 hours per day- Ability to bend, twist, kneel, inspect- One year of maintenance and/or electrical maintenance experience preferredSchedule:1st and 2nd shift available.1st shift: Mon - Fri 7 am - 3:30pm2nd shift: Mon - Thurs 3:30 pm - 2 am To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you good at troubleshooting? Do you have a background in maintaining and repairing machines? Spherion Staffing currently has an opening for maintenance technician in the manufacturing industry. This is a direct hire opportunity with benefits available.Responsibilities:- Work with operations to ensure plant equipment is operating when necessary, through diagnosis, troubleshooting, and repair. Issues may be mechanical or electrical.- Perform preventative maintenance on all plant equipment to ensure maximum productivity.- Work with operations to focus on improving productivity through the use of improvements in machines, materials, or processes.- Install and troubleshoot any new equipment as directed.- Repairs die lubrication systems- Clean/Lubricate shafts, bearings, gears, and other machinery- Fabricate equipment to meet maintenance requirements.- Change filers and fluids as needed- Other duties as assignedWorking hours: Various Shifts AvailableSkills:- Ability to read and interpret blueprints- Welding and soldering experience- Experience installing and repairing equipment, such as small electrical components- Team player- Manual dexterity- Experience using power toolsEducation:High SchoolExperience:1-4 yearsQualifications:- Ability to stand 8-10 hours per day- Ability to bend, twist, kneel, inspect- One year of maintenance and/or electrical maintenance experience preferredSchedule:1st and 2nd shift available.1st shift: Mon - Fri 7 am - 3:30pm2nd shift: Mon - Thurs 3:30 pm - 2 am To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Conroe, Texas
      • Permanent
      • $28.00 - $30.00 per hour
      • Various Shifts Available
      We are looking for self motivated, responsible Senior Injection Mold Maintenance Technician to join our team. Senior Injection Mold Maintenance Technician are given daily priorities and goals to reach and MUST have previous experience in a high volume manufacturing environment.Responsibilities:Include the maintenance and repair of equipment and machinery used in Injection Molding. Performs facility repairs and maintenance work orders in accordance to MEDIVATORS safety and appearance standards.Performs work to all regulatory standards and ensures optimum equipment efficiency/reliability. The scope of work will include all electrical, mechanical, automation, facility and supporting infrastructure systems.Work with internal and external customers to develop and maintain preventive maintenance procedures and schedulesWorking hours: Various Shifts AvailableSkills:Must be able to sustain a level of technical expertise and competence that will support an FDA regulated device manufacturing environment Able to manage multiple projects and effectively utilize time wisely to support the operational needs of the organizationMust be capable of advanced equipment Trouble-shooting and repair Proactively provide a summary of maintenance/repair recommendations to the Maintenance SupervisorEducation:BachelorsExperience:4-7 yearsQualifications:3-5 years experience with mechanical/electrical equipment repair requiredInjection Molding Machine maintenance experience of 2--3 years required a minimum of 1--2 years? experience as a maintenance technician in a manufacturing environment strongly preferred Prefer forklift certification or ability to achieve certification within the first 30 days Applicants must submit a resume with application. Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for self motivated, responsible Senior Injection Mold Maintenance Technician to join our team. Senior Injection Mold Maintenance Technician are given daily priorities and goals to reach and MUST have previous experience in a high volume manufacturing environment.Responsibilities:Include the maintenance and repair of equipment and machinery used in Injection Molding. Performs facility repairs and maintenance work orders in accordance to MEDIVATORS safety and appearance standards.Performs work to all regulatory standards and ensures optimum equipment efficiency/reliability. The scope of work will include all electrical, mechanical, automation, facility and supporting infrastructure systems.Work with internal and external customers to develop and maintain preventive maintenance procedures and schedulesWorking hours: Various Shifts AvailableSkills:Must be able to sustain a level of technical expertise and competence that will support an FDA regulated device manufacturing environment Able to manage multiple projects and effectively utilize time wisely to support the operational needs of the organizationMust be capable of advanced equipment Trouble-shooting and repair Proactively provide a summary of maintenance/repair recommendations to the Maintenance SupervisorEducation:BachelorsExperience:4-7 yearsQualifications:3-5 years experience with mechanical/electrical equipment repair requiredInjection Molding Machine maintenance experience of 2--3 years required a minimum of 1--2 years? experience as a maintenance technician in a manufacturing environment strongly preferred Prefer forklift certification or ability to achieve certification within the first 30 days Applicants must submit a resume with application. Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Conroe, Texas
      • Permanent
      • $28.00 - $30.00 per hour
      • Various Shifts Available
      We are looking for self motivated, responsible Senior Injection Mold Maintenance Technician to join our team. Senior Injection Mold Maintenance Technician are given daily priorities and goals to reach and MUST have previous experience in a high volume manufacturing environment.Responsibilities:Include the maintenance and repair of equipment and machinery used in Injection Molding. Performs facility repairs and maintenance work orders in accordance to MEDIVATORS safety and appearance standards.Performs work to all regulatory standards and ensures optimum equipment efficiency/reliability. The scope of work will include all electrical, mechanical, automation, facility and supporting infrastructure systems.Work with internal and external customers to develop and maintain preventive maintenance procedures and schedulesWorking hours: Various Shifts AvailableSkills:Must be able to sustain a level of technical expertise and competence that will support an FDA regulated device manufacturing environment Able to manage multiple projects and effectively utilize time wisely to support the operational needs of the organizationMust be capable of advanced equipment Trouble-shooting and repair Proactively provide a summary of maintenance/repair recommendations to the Maintenance SupervisorEducation:BachelorsExperience:4-7 yearsQualifications:3- 5 years experience with mechanical/electrical equipment repair requiredInjection Molding Machine maintenance experience of 2--3 years required A minimum of 1--2 years experience as a maintenance technician in a manufacturing environment strongly preferred Prefer forklift certification or ability to achieve certification within the first 30 days Applicants must submit a resume with application. Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for self motivated, responsible Senior Injection Mold Maintenance Technician to join our team. Senior Injection Mold Maintenance Technician are given daily priorities and goals to reach and MUST have previous experience in a high volume manufacturing environment.Responsibilities:Include the maintenance and repair of equipment and machinery used in Injection Molding. Performs facility repairs and maintenance work orders in accordance to MEDIVATORS safety and appearance standards.Performs work to all regulatory standards and ensures optimum equipment efficiency/reliability. The scope of work will include all electrical, mechanical, automation, facility and supporting infrastructure systems.Work with internal and external customers to develop and maintain preventive maintenance procedures and schedulesWorking hours: Various Shifts AvailableSkills:Must be able to sustain a level of technical expertise and competence that will support an FDA regulated device manufacturing environment Able to manage multiple projects and effectively utilize time wisely to support the operational needs of the organizationMust be capable of advanced equipment Trouble-shooting and repair Proactively provide a summary of maintenance/repair recommendations to the Maintenance SupervisorEducation:BachelorsExperience:4-7 yearsQualifications:3- 5 years experience with mechanical/electrical equipment repair requiredInjection Molding Machine maintenance experience of 2--3 years required A minimum of 1--2 years experience as a maintenance technician in a manufacturing environment strongly preferred Prefer forklift certification or ability to achieve certification within the first 30 days Applicants must submit a resume with application. Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Woodway, Texas
      • Permanent
      • $30.00 - $40.00 per hour
      • 8:00 AM - 5:00 PM
      Under the direction of the Maintenance Manager, the Maintenance Supervisor will ensure that safety, quality, and production goals are met. The Maintenance Supervisor will guide and direct the Maintenance Technicians on their respective shift. Incumbent is responsible for the general maintenance of production equipment and plant facilities and will apply knowledge of electrical/electronic and mechanical principles in determining equipment malfunctions and restoring equipment into operation. The Maintenance Supervisor will provide skilled mechanical and electrical/electronic support to all areas of manufacturing.Responsibilities:Install, repair, troubleshoot and setup industrial process controls and pneumatic, hydraulic, and electro- mechanical systems.Has significant understanding of production equipment, functioning and operations.Ability to read and interpret meters, schematic diagrams, blueprints, rules, and other measuring instruments.Maintains company-required performance and maintenance records for identified equipment.Supervise preventive maintenance functions as directed. Assists other maintenance personnel with technical troubleshooting.Assists with the training and development of new technicians and other technical level employees.Performs other duties as required.Supervise and guide and direct Maintenance Technicians on their respective shifts.Supervise and lead continuous improvement projects in both Maintenance and Production areas.Generate PM and Work orders in CMMS.Schedule and track PM and Work order completion in CMMS.Generate and track proactive maintenance work orders.Quote and generate purchase orders for parts.Coordinate with vendors for repairs and PM services.Work with Safety teams for both equipment and facility functionsWorking hours: 8:00 AM - 5:00 PMSkills:Experience in any of the following is preferred: Electro-mechanical work, Variable frequency drives, welding, Pneumatic controls, Inventory management, Air Compressors, Preventive Maintenance and Predictive Maintenance,Strong motivation, organization, time management, documentation, and communication skills.Must have excellent attention to detail and the ability to multi-task and prioritize.Demonstration of strong work ethics (punctual, dependable, and trustworthy)Ability to utilize common sense and skills in completing responsibilities and operating equipment conforming to Company production, personnel, and safety procedures.Ability to read and comprehend simple instructions, operation manuals, preventative maintenance and troubleshooting guides.Organizational skills; ability to work with little supervision.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or its equivalent required.Associates Degree or College Degree (prefer electro-mechanical or mechanics); one to three years related experience and/or training; or equivalent combination of education or experience (preferred). For immediate consideration, please email your resume to: solmelton@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Under the direction of the Maintenance Manager, the Maintenance Supervisor will ensure that safety, quality, and production goals are met. The Maintenance Supervisor will guide and direct the Maintenance Technicians on their respective shift. Incumbent is responsible for the general maintenance of production equipment and plant facilities and will apply knowledge of electrical/electronic and mechanical principles in determining equipment malfunctions and restoring equipment into operation. The Maintenance Supervisor will provide skilled mechanical and electrical/electronic support to all areas of manufacturing.Responsibilities:Install, repair, troubleshoot and setup industrial process controls and pneumatic, hydraulic, and electro- mechanical systems.Has significant understanding of production equipment, functioning and operations.Ability to read and interpret meters, schematic diagrams, blueprints, rules, and other measuring instruments.Maintains company-required performance and maintenance records for identified equipment.Supervise preventive maintenance functions as directed. Assists other maintenance personnel with technical troubleshooting.Assists with the training and development of new technicians and other technical level employees.Performs other duties as required.Supervise and guide and direct Maintenance Technicians on their respective shifts.Supervise and lead continuous improvement projects in both Maintenance and Production areas.Generate PM and Work orders in CMMS.Schedule and track PM and Work order completion in CMMS.Generate and track proactive maintenance work orders.Quote and generate purchase orders for parts.Coordinate with vendors for repairs and PM services.Work with Safety teams for both equipment and facility functionsWorking hours: 8:00 AM - 5:00 PMSkills:Experience in any of the following is preferred: Electro-mechanical work, Variable frequency drives, welding, Pneumatic controls, Inventory management, Air Compressors, Preventive Maintenance and Predictive Maintenance,Strong motivation, organization, time management, documentation, and communication skills.Must have excellent attention to detail and the ability to multi-task and prioritize.Demonstration of strong work ethics (punctual, dependable, and trustworthy)Ability to utilize common sense and skills in completing responsibilities and operating equipment conforming to Company production, personnel, and safety procedures.Ability to read and comprehend simple instructions, operation manuals, preventative maintenance and troubleshooting guides.Organizational skills; ability to work with little supervision.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or its equivalent required.Associates Degree or College Degree (prefer electro-mechanical or mechanics); one to three years related experience and/or training; or equivalent combination of education or experience (preferred). For immediate consideration, please email your resume to: solmelton@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Ashland, Ohio
      • Permanent
      The Professional Division of Spherion Mid Ohio is partnered with an evolving Ashland manufacturing facility seeking a Maintenance Supervisor to join their team! Come be a part of this forward thinking and growing team!   Are you a culture and team builder? Do you have a natural eye and passion for continuous improvement? Do you take pride in your role of directing maintenance activities and driving a team to success? Have you been in a rotational molding or injection molding manufacturing environment? If so, this might be the role for you!   **This is a direct hire opportunity, NEVER go through a temp-to-hire process. If selected, day ONE you are this companies employee!**   The Maintenance Supervisor will be responsible for all maintenance related tasks in manufacturing and building maintenance. Responsible for supervision over maintenance personnel and their performance. Responsibilities of the Maintenance Manager: · Maintains all manufacturing equipment to ensure proper operation, utilizing effective TPM methodology to develop a system that improves downtime month over month.   · Understand trouble shooting and manufacturing technology · Schedule maintenance projects and priorities to meet business needs and production timelines. Assign duties to maintenance staff, document staffs service performance, and give feedback to the staff on their performance to the customer daily. · Assist and support with all team and company projects. · Identify and track cost savings and process improvements monthly. · Oversee training and evaluation of maintenance employees and documents progress of both Safety and Performance. · Issue both written and verbal warnings when needed. Review warnings with human resource manager for possible disciplinary actions. · Maintenance shop to be clean and organized and maintained daily. · Monitor and assist in correcting safety issues indicated on the monthly safety walk through or issues brought up by the safety team. · Schedule overtime as needed to ensure production is not interrupted. · Hold meetings with manufacturing and plant managers once a week to review all needs and projects.   Qualifications for Maintenance Manager: Minimum of 2 years' experience in maintenance leadership role. Strong knowledge of engineering concepts, including electrical, hydraulic, IT, PLC and mechanical systems. Microsoft Office experience, preferred.
      The Professional Division of Spherion Mid Ohio is partnered with an evolving Ashland manufacturing facility seeking a Maintenance Supervisor to join their team! Come be a part of this forward thinking and growing team!   Are you a culture and team builder? Do you have a natural eye and passion for continuous improvement? Do you take pride in your role of directing maintenance activities and driving a team to success? Have you been in a rotational molding or injection molding manufacturing environment? If so, this might be the role for you!   **This is a direct hire opportunity, NEVER go through a temp-to-hire process. If selected, day ONE you are this companies employee!**   The Maintenance Supervisor will be responsible for all maintenance related tasks in manufacturing and building maintenance. Responsible for supervision over maintenance personnel and their performance. Responsibilities of the Maintenance Manager: · Maintains all manufacturing equipment to ensure proper operation, utilizing effective TPM methodology to develop a system that improves downtime month over month.   · Understand trouble shooting and manufacturing technology · Schedule maintenance projects and priorities to meet business needs and production timelines. Assign duties to maintenance staff, document staffs service performance, and give feedback to the staff on their performance to the customer daily. · Assist and support with all team and company projects. · Identify and track cost savings and process improvements monthly. · Oversee training and evaluation of maintenance employees and documents progress of both Safety and Performance. · Issue both written and verbal warnings when needed. Review warnings with human resource manager for possible disciplinary actions. · Maintenance shop to be clean and organized and maintained daily. · Monitor and assist in correcting safety issues indicated on the monthly safety walk through or issues brought up by the safety team. · Schedule overtime as needed to ensure production is not interrupted. · Hold meetings with manufacturing and plant managers once a week to review all needs and projects.   Qualifications for Maintenance Manager: Minimum of 2 years' experience in maintenance leadership role. Strong knowledge of engineering concepts, including electrical, hydraulic, IT, PLC and mechanical systems. Microsoft Office experience, preferred.
      • Mankato, Minnesota
      • Permanent
      • $17.20 - $21.00 per hour
      • 1:00 PM - 1:00 AM
      Spherion has a great DIRECT HIRE opportunity for a WEEKEND Maintenance Technician! The ideal candidate will take initiative, solve problems, and make decisions. We are seeking a Maintenance Technician to make sure our equipment is running smoothly Friday, Saturday and Sunday. This is a unique work schedule that could be perfect for someone who has other obligations/interests during the standard work week! Hours: Friday - Sunday, 1:00 p.m. - 1:30 a.m.Responsibilities:Manage start-up to make sure equipment is in proper operating condition.Demand Maintenance as assigned: Skill in diagnosing equipment defects and making necessary repairs.Maintain, repair and troubleshoot machinery, ovens, mechanical lift trucks, and facilities problems as needed for production issues and efficiency.Safety operate various machines, including a Band Saw, Break Press, Mill, Lathe, Grinder, etc.Inspect machines and equipment for conformance with operational standards.Maintain all areas of the shop, boiler room, and the interior/exterior of the plant.Troubleshoot electrical functions (i.e. motors, controls, PLC function, and other basic wiring)Confers with management and suppliers to resolve maintenance problems and recommends measures to improve operations and conditions of machines and equipmentComplete Preventative Maintenance tasks as assigned.Assist with inventory control of tools and parts on hand.Work with tools and power equipment as well as material handling.Operate mechanical forklift, pallet jack, battery-changer and stock picker. Follow Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) training, along with company pre-requisite programs, Standard Operating Procedures (SOPs), and Standard Sanitation Operating Procedures (SSOPs).Performs other duties and responsibilities as necessary.Working hours: 1:00 PM - 1:00 AMSkills:Ability to read and interpret documents such as safety rules, operating and/or maintenance instructions and procedure manuals.Ability to write routine breakdown, preventive maintenance and other maintenance related reports and correspondence.Intermediate verbal communication skills in English.Ability to add and subtract, multiply, and divide using whole numbers, common fractions, and decimals.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades (i.e. welding, tap measure, band saw, lathe, caliper, micrometer, etc.).Self-motivated, able to work unsupervised and with teamsProject orientedMulti-tasking abilityAttention to detailAbility to work in a fast-paced environmentWork well with othersExcellent verbal and written communication skills; must work effectively with all levels of management and team membersEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED1-5 years of related experience and/or training or equivalent combination of education and experiencePreferred: Basic knowledge of manufacturing.Facility maintenance experience preferredIndustrial mechanical experience.Knowledge of hydraulics, pneumatics and electronicsKnowledge of electrical/mechanical safety practicesPrior Knowledge of food processing equipment helpful. Electrical and electrical troubleshooting of 120/240/480 3ph systems.Troubleshooting PLC and frequency drives.Welding (both MIG and TIG).Bachelors Degree Machining or Electrical This is a DIRECT HIRE opportunity. You will be hired direct
      Spherion has a great DIRECT HIRE opportunity for a WEEKEND Maintenance Technician! The ideal candidate will take initiative, solve problems, and make decisions. We are seeking a Maintenance Technician to make sure our equipment is running smoothly Friday, Saturday and Sunday. This is a unique work schedule that could be perfect for someone who has other obligations/interests during the standard work week! Hours: Friday - Sunday, 1:00 p.m. - 1:30 a.m.Responsibilities:Manage start-up to make sure equipment is in proper operating condition.Demand Maintenance as assigned: Skill in diagnosing equipment defects and making necessary repairs.Maintain, repair and troubleshoot machinery, ovens, mechanical lift trucks, and facilities problems as needed for production issues and efficiency.Safety operate various machines, including a Band Saw, Break Press, Mill, Lathe, Grinder, etc.Inspect machines and equipment for conformance with operational standards.Maintain all areas of the shop, boiler room, and the interior/exterior of the plant.Troubleshoot electrical functions (i.e. motors, controls, PLC function, and other basic wiring)Confers with management and suppliers to resolve maintenance problems and recommends measures to improve operations and conditions of machines and equipmentComplete Preventative Maintenance tasks as assigned.Assist with inventory control of tools and parts on hand.Work with tools and power equipment as well as material handling.Operate mechanical forklift, pallet jack, battery-changer and stock picker. Follow Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) training, along with company pre-requisite programs, Standard Operating Procedures (SOPs), and Standard Sanitation Operating Procedures (SSOPs).Performs other duties and responsibilities as necessary.Working hours: 1:00 PM - 1:00 AMSkills:Ability to read and interpret documents such as safety rules, operating and/or maintenance instructions and procedure manuals.Ability to write routine breakdown, preventive maintenance and other maintenance related reports and correspondence.Intermediate verbal communication skills in English.Ability to add and subtract, multiply, and divide using whole numbers, common fractions, and decimals.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades (i.e. welding, tap measure, band saw, lathe, caliper, micrometer, etc.).Self-motivated, able to work unsupervised and with teamsProject orientedMulti-tasking abilityAttention to detailAbility to work in a fast-paced environmentWork well with othersExcellent verbal and written communication skills; must work effectively with all levels of management and team membersEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED1-5 years of related experience and/or training or equivalent combination of education and experiencePreferred: Basic knowledge of manufacturing.Facility maintenance experience preferredIndustrial mechanical experience.Knowledge of hydraulics, pneumatics and electronicsKnowledge of electrical/mechanical safety practicesPrior Knowledge of food processing equipment helpful. Electrical and electrical troubleshooting of 120/240/480 3ph systems.Troubleshooting PLC and frequency drives.Welding (both MIG and TIG).Bachelors Degree Machining or Electrical This is a DIRECT HIRE opportunity. You will be hired direct
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 per hour
      • 5:00 AM - 3:15 PM
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 5:00 AM - 3:15 PMSkills:--Manual dexterity--Ability to work in a team setting--A positive can-do attitude--Motivation and communication skills--Problem solving skills and basic math skills--Refuse to be satisfied with average performance--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentRequires passing a pre-employment screening. Which includes a drug screenMust be 18 years of age or older. Fabrication background and or experience is preferred. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This is an entry position for new hires joining the company. Workers in the labor pool are assigned to operating and service departments to assist with extra workload, cover absences and vacations.Responsibilities:Assist manufacturing, janitorial and or maintenance in achieving company goals.Working hours: 5:00 AM - 3:15 PMSkills:--Manual dexterity--Ability to work in a team setting--A positive can-do attitude--Motivation and communication skills--Problem solving skills and basic math skills--Refuse to be satisfied with average performance--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentRequires passing a pre-employment screening. Which includes a drug screenMust be 18 years of age or older. Fabrication background and or experience is preferred. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Faribault, Minnesota
      • Permanent
      • $25.00 - $32.00 per hour
      • 7:00 AM - 3:20 PM
      Provide Maintenance and repair services ensuring that CNC and manual equipment is in good running and safe operating condition. SHIFT: M-F 7am-3:20pmResponsibilities:Plans work assignments in order to make efficient use of time and skills and to ensure minimal down time of production equipment. Able to diagnose mechanical and electrical issues related to component failure of highly technical production equipment. Perform preventative maintenance duties on production equipment.Recommends new methods in order to improve safety, quality and productivity.Notify Supervisor of any problems with procedures or equipment in order to maintain highest degree of maintenance and safety equipment. Maintains a high awareness of personal safety at all times. Maintains working area in a neat and orderly manner.Maintain effective working relationships with fellow employees.Perform other duties as necessary.Working hours: 7:00 AM - 3:20 PMSkills:Technical college certificate in Mechanical & Electrical Maintenance.Working knowledge of CNC and manual cutting machineryEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent. Apply now for this Direct Hire (permanent) position with amazing Benefits Pkg at a high growth company that has a Continuous Improvement Board in place for Employee Ideas! AIR CONDITIONED-CLEAN facility! Benefit Package includes: Medical, Vision, Dental, ST/LT Disability, Paid Holidays, Tuition Reimbursement, Prescription Safety Glass Subsidy, 401K, Competitive Compensation, Employee Assistance Program, Shop Clothing with Name Tag ad more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Provide Maintenance and repair services ensuring that CNC and manual equipment is in good running and safe operating condition. SHIFT: M-F 7am-3:20pmResponsibilities:Plans work assignments in order to make efficient use of time and skills and to ensure minimal down time of production equipment. Able to diagnose mechanical and electrical issues related to component failure of highly technical production equipment. Perform preventative maintenance duties on production equipment.Recommends new methods in order to improve safety, quality and productivity.Notify Supervisor of any problems with procedures or equipment in order to maintain highest degree of maintenance and safety equipment. Maintains a high awareness of personal safety at all times. Maintains working area in a neat and orderly manner.Maintain effective working relationships with fellow employees.Perform other duties as necessary.Working hours: 7:00 AM - 3:20 PMSkills:Technical college certificate in Mechanical & Electrical Maintenance.Working knowledge of CNC and manual cutting machineryEducation:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent. Apply now for this Direct Hire (permanent) position with amazing Benefits Pkg at a high growth company that has a Continuous Improvement Board in place for Employee Ideas! AIR CONDITIONED-CLEAN facility! Benefit Package includes: Medical, Vision, Dental, ST/LT Disability, Paid Holidays, Tuition Reimbursement, Prescription Safety Glass Subsidy, 401K, Competitive Compensation, Employee Assistance Program, Shop Clothing with Name Tag ad more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Stockton, California
      • Permanent
      • $25.00 - $30.00 per hour
      • 6:30 AM - 3:00 PM
      Work for a Global Leader in Chemical Production for Fertilizer in Stockton, CA. This facility imports bulk liquid products via ocean going vessels and distributes the product to customers by truck and rail. The Terminal Operator will monitor and maintain Terminal equipment to ensure proper and safe operation as well as monitor and coordinate loading and unloading operations to ensure safe and efficient transfers. The Terminal Operator - Control Room will monitor and control rail and truck delivery systems to ensure safe and dependable supply to our customers. Possesses general mechanical skills and competencies. Responsible for maintaining the terminal equipment in a safe and efficient working manner. This position is a highly sought after permanent roll with a full compensation package including Bonus, Medical, 401K, vacation / PTO and more.Responsibilities:* Monitor and perform routine preventive maintenance of Facility equipment to ensure proper and safe operation.* Perform a variety of tasks pertaining to the installation, maintenance, and service of mechanical equipment, instruments and structures.* Perform operational tasks as required to insure a safe, reliable, accurate and consistent supply to customers via truck or rail car loading.* Conduct prescribed testing and calibration to maintain accuracy of all systems.* Write operational procedures including hazard assessments and safe job analysis for the variety of maintenance and operational procedures. * Monitor supplies and help maintain appropriate inventories. Assist with estimating quantities of materials and supplies needed and placing orders.* Recommend and assist with equipment purchases by researching cost, availability and other factors. Prepare time, material, work order and equipment use records.Working hours: 6:30 AM - 3:00 PMSkills:--Strong mechanical / instrumentation skills--Strong safety orientation--Strong teamwork skills--Strong detail orientation--Solid organizational skills--Solid process orientation--Good computer skills--Good product knowledgeEducation:High SchoolExperience:4-7 yearsQualifications:High school diploma or equivalentEligible for Transportation Workers Identification Card (TWIC)The position holder must to be able to:* Pick-up heavy material (25-50 lbs.)* Work in confined spaces* Work at heights up to 60 feet* Wear all types of personal protective equipment, including fall protection* Work outdoors/indoors under extreme temperatures * Work overtime and work adjusted hours/work days due to schedule changes when there is a need/requirement to deliver on terminal obligations. Apply at www.spherion.com/apply for consideration.Contact: 209 465-1500, and or email jasonbeltz@spherion.com This is a Direct Hire Perm career opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law. San Francisco Fair Chance Ordinance: Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.
      Work for a Global Leader in Chemical Production for Fertilizer in Stockton, CA. This facility imports bulk liquid products via ocean going vessels and distributes the product to customers by truck and rail. The Terminal Operator will monitor and maintain Terminal equipment to ensure proper and safe operation as well as monitor and coordinate loading and unloading operations to ensure safe and efficient transfers. The Terminal Operator - Control Room will monitor and control rail and truck delivery systems to ensure safe and dependable supply to our customers. Possesses general mechanical skills and competencies. Responsible for maintaining the terminal equipment in a safe and efficient working manner. This position is a highly sought after permanent roll with a full compensation package including Bonus, Medical, 401K, vacation / PTO and more.Responsibilities:* Monitor and perform routine preventive maintenance of Facility equipment to ensure proper and safe operation.* Perform a variety of tasks pertaining to the installation, maintenance, and service of mechanical equipment, instruments and structures.* Perform operational tasks as required to insure a safe, reliable, accurate and consistent supply to customers via truck or rail car loading.* Conduct prescribed testing and calibration to maintain accuracy of all systems.* Write operational procedures including hazard assessments and safe job analysis for the variety of maintenance and operational procedures. * Monitor supplies and help maintain appropriate inventories. Assist with estimating quantities of materials and supplies needed and placing orders.* Recommend and assist with equipment purchases by researching cost, availability and other factors. Prepare time, material, work order and equipment use records.Working hours: 6:30 AM - 3:00 PMSkills:--Strong mechanical / instrumentation skills--Strong safety orientation--Strong teamwork skills--Strong detail orientation--Solid organizational skills--Solid process orientation--Good computer skills--Good product knowledgeEducation:High SchoolExperience:4-7 yearsQualifications:High school diploma or equivalentEligible for Transportation Workers Identification Card (TWIC)The position holder must to be able to:* Pick-up heavy material (25-50 lbs.)* Work in confined spaces* Work at heights up to 60 feet* Wear all types of personal protective equipment, including fall protection* Work outdoors/indoors under extreme temperatures * Work overtime and work adjusted hours/work days due to schedule changes when there is a need/requirement to deliver on terminal obligations. Apply at www.spherion.com/apply for consideration.Contact: 209 465-1500, and or email jasonbeltz@spherion.com This is a Direct Hire Perm career opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law. San Francisco Fair Chance Ordinance: Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.
      • Hawley, Minnesota
      • Permanent
      • $21.00 - $26.00 per hour
      • 6:00 AM - 4:30 PM
      Do you have manufacturing experience? Are you seeking your next career opportunity with a growing company? Spherion Staffing is currently seeking experienced Fabricators. These are direct hire opportunities.Responsibilities:- Observes operation of equipment and verifies conformance of the work piece to specifications- Perform tooling changes- Perform daily inspections and complete routine maintenance- Assist maintenance and/or service technicians with troubleshooting and basic repairs- Prepare/stage parts for the next operation- Ability to operate a variety of machinery; shear, angle shear, drill press, forklift, press break, punch press, etc.Working hours: 6:00 AM - 4:30 PMSkills:- Read and understand blueprintsEducation:No Degree RequiredExperience:0-1 yearsQualifications:- One year of manufacturing fabrication experience- Experience using various welding equipment- Experience operating hand tools and machinesSchedule: Mon - Thurs 6 am - 4:30 pm. OT on Friday as needed. To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Do you have manufacturing experience? Are you seeking your next career opportunity with a growing company? Spherion Staffing is currently seeking experienced Fabricators. These are direct hire opportunities.Responsibilities:- Observes operation of equipment and verifies conformance of the work piece to specifications- Perform tooling changes- Perform daily inspections and complete routine maintenance- Assist maintenance and/or service technicians with troubleshooting and basic repairs- Prepare/stage parts for the next operation- Ability to operate a variety of machinery; shear, angle shear, drill press, forklift, press break, punch press, etc.Working hours: 6:00 AM - 4:30 PMSkills:- Read and understand blueprintsEducation:No Degree RequiredExperience:0-1 yearsQualifications:- One year of manufacturing fabrication experience- Experience using various welding equipment- Experience operating hand tools and machinesSchedule: Mon - Thurs 6 am - 4:30 pm. OT on Friday as needed. To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Missi Abfalter at 218-346-3801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 7:00 AM - 3:15 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:High SchoolExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times!BENEFITS, BENEFITS, BENEFITS, including: Medical & Short-Term Disability HRA FREE CLINIC for employees and dependentsLong Term Disability & Life InsurancePersonal Time Off - Vacation and Sick Time
      • Kalispell, Montana
      • Permanent
      • $20 - $40 per year
      • 7:00 AM - 4:00 PM
      Are you looking for a great opportunity to work with a leading provider of precision machined components? Do you enjoy working with metal and creating a variety of specialty parts?IF SO, we currently have an exciting opportunity for the right Senior Machinist, to start almost immediately, on special projects and complex parts. The successful candidate will have exceptional knowledge of high precision machines and their capabilities.Responsibilities:-Plans, lays out work, sets up and operates all types of lathes, mills or grinders to machine or grind developmental, production or maintenance parts to exacting tolerances and dimensions.-Expected to mentor junior machinists.-Performs other duties as assigned or required.Working hours: 7:00 AM - 4:00 PMSkills:- Experience in GibbsCAM, MasterCAM or Esprit.- Working knowledge of G-Code- Big lathe and 5-axis experience a big plus- Strong math skill/proficient in GD&T- Must be customer focused and possess: -Ability to perform complex set-up and fabrication of machined parts with little or no direction; -In-depth knowledge of machining equipment including ability to use judgment and safe practices; -Ability to read, interpret and explain engineering drawings, sketches and verbal and written instructions; -Skills to maintain the flow of work within the unit using independent judgment in solving moderately to highly complex problems and recommend solutions.-Demonstrated verbal and written communication skills necessary to communicate tactfully and effectively in a technical environment and basic computer skills.-The ability to work both independently and lead in a team environment is essential as is the ability to work extended hours as required.Education:High SchoolExperience:10+ yearsQualifications:-Typically requires a High School Diploma, technical/trade school training or equivalent-10+ plus years related experience-Must be a US Citizen as defined by ITAR. Company offers a great benefit package and Pay is DOE!Apply online today at www.spherion.com/apply/75034 or contact us at 406-470-7300 for additional information.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Are you looking for a great opportunity to work with a leading provider of precision machined components? Do you enjoy working with metal and creating a variety of specialty parts?IF SO, we currently have an exciting opportunity for the right Senior Machinist, to start almost immediately, on special projects and complex parts. The successful candidate will have exceptional knowledge of high precision machines and their capabilities.Responsibilities:-Plans, lays out work, sets up and operates all types of lathes, mills or grinders to machine or grind developmental, production or maintenance parts to exacting tolerances and dimensions.-Expected to mentor junior machinists.-Performs other duties as assigned or required.Working hours: 7:00 AM - 4:00 PMSkills:- Experience in GibbsCAM, MasterCAM or Esprit.- Working knowledge of G-Code- Big lathe and 5-axis experience a big plus- Strong math skill/proficient in GD&T- Must be customer focused and possess: -Ability to perform complex set-up and fabrication of machined parts with little or no direction; -In-depth knowledge of machining equipment including ability to use judgment and safe practices; -Ability to read, interpret and explain engineering drawings, sketches and verbal and written instructions; -Skills to maintain the flow of work within the unit using independent judgment in solving moderately to highly complex problems and recommend solutions.-Demonstrated verbal and written communication skills necessary to communicate tactfully and effectively in a technical environment and basic computer skills.-The ability to work both independently and lead in a team environment is essential as is the ability to work extended hours as required.Education:High SchoolExperience:10+ yearsQualifications:-Typically requires a High School Diploma, technical/trade school training or equivalent-10+ plus years related experience-Must be a US Citizen as defined by ITAR. Company offers a great benefit package and Pay is DOE!Apply online today at www.spherion.com/apply/75034 or contact us at 406-470-7300 for additional information.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Permanent
      • $20.00 - $22.00 per hour
      • 6:00 AM - 4:30 PM
      Spherion Staffing has a first shift opening for a Shop Fabricator. The Shop Fabricator will assist in installing, dismantling, repairing, reassembling, and moving machinery at our sites and shops. They will assist with various capital improvement projects, possibly involving welding, machine operating, cutting, electrical/hydraulic work, and mechanical troubleshooting.Monday-Thursday 6 am-4:30 pmDirect Hire OpportunityPay $20-22/hour DOEResponsibilities:- Install, dismantle, repair, reassemble, and move machinery at different sites and shops- Fabrication of steel, to include welding, machining, cutting, and forming- Operation of overhead cranes, mobile cranes, and forklifts as training allows- Procure sufficient parts for equipment in cooperation with supervisor and site maintenance- Communicate with supervisor/manager on status of equipment and projects- Communicate with equipment manufacturers to troubleshoot issues and order required partsResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-High School Diploma or GED required-Steel fabrication experience preferred-Industrial/general maintenance and/or millwright experience preferred-Valid Driver's License required-Familiar with GMAW, FCAW & SMAW welding processes-Ability to operate a fuel cutting torch and plasma cutting-Familiar with the various methods of forming holes, various grinders, turning lathe and milling machineEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has a first shift opening for a Shop Fabricator. The Shop Fabricator will assist in installing, dismantling, repairing, reassembling, and moving machinery at our sites and shops. They will assist with various capital improvement projects, possibly involving welding, machine operating, cutting, electrical/hydraulic work, and mechanical troubleshooting.Monday-Thursday 6 am-4:30 pmDirect Hire OpportunityPay $20-22/hour DOEResponsibilities:- Install, dismantle, repair, reassemble, and move machinery at different sites and shops- Fabrication of steel, to include welding, machining, cutting, and forming- Operation of overhead cranes, mobile cranes, and forklifts as training allows- Procure sufficient parts for equipment in cooperation with supervisor and site maintenance- Communicate with supervisor/manager on status of equipment and projects- Communicate with equipment manufacturers to troubleshoot issues and order required partsResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-High School Diploma or GED required-Steel fabrication experience preferred-Industrial/general maintenance and/or millwright experience preferred-Valid Driver's License required-Familiar with GMAW, FCAW & SMAW welding processes-Ability to operate a fuel cutting torch and plasma cutting-Familiar with the various methods of forming holes, various grinders, turning lathe and milling machineEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mills River, North Carolina
      • Permanent
      • $18.00 - $20.00 per hour
      • 5:00 AM - 3:30 PM
      Spherion is hiring Machine Operators immediately in Mills River, NC. NO WEEKENDS REQUIRED. This position will work Monday-Friday, 5:00AM-3:30PM. The ideal candidate will have at least 1 year of experience operating a press brake machine. However, entry level candidates are encouraged to apply!Responsibilities:Perform necessary pre-operation activities to ensure proper equipment startup and operation on multiple pieces of equipmentOperate, monitor, troubleshoot and perform preventative maintenance on machinesInspect parts to specifications and make adjustments or tool changesRead and interpret blueprints and diagramsReport any issues or problems to supervisor or managerWorking hours: 5:00 AM - 3:30 PMSkills:Able to work in a fast paced, high speed environmentWork on a team and independentlyCommitment to safety and housekeepingAble to stand for duration of shiftEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or GEDPrevious experience in machine operationAble to work heavy equipmentKnowledge of production procedures Apply today at www.spherion.com or text "JOBS" to 828-348-0390!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring Machine Operators immediately in Mills River, NC. NO WEEKENDS REQUIRED. This position will work Monday-Friday, 5:00AM-3:30PM. The ideal candidate will have at least 1 year of experience operating a press brake machine. However, entry level candidates are encouraged to apply!Responsibilities:Perform necessary pre-operation activities to ensure proper equipment startup and operation on multiple pieces of equipmentOperate, monitor, troubleshoot and perform preventative maintenance on machinesInspect parts to specifications and make adjustments or tool changesRead and interpret blueprints and diagramsReport any issues or problems to supervisor or managerWorking hours: 5:00 AM - 3:30 PMSkills:Able to work in a fast paced, high speed environmentWork on a team and independentlyCommitment to safety and housekeepingAble to stand for duration of shiftEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or GEDPrevious experience in machine operationAble to work heavy equipmentKnowledge of production procedures Apply today at www.spherion.com or text "JOBS" to 828-348-0390!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • College Station, Texas
      • Permanent
      • $85,000 - $95,000 per year
      • Various Shifts Available
      Spherion Staffing has partnered with a leading biotechnology company in College Station, TX to recruit for this role. The primary purpose of this role is to ensure sterile manufacturing facilities and common areas are cleaned, decontaminated, and disinfected according to established cGMP requirements. This role will be responsible for administrative duties, record keeping, material and supplies management, coordination of personnel work activities, troubleshooting, scheduling, and employee performance. Must be flexible to respond to changing priorities and handle changing workflow, including working on multiple projects at multiple sites and/or a flexible schedule as directed by the Shift Operations Manager.Must be able to excel in a team-oriented environment and be able to interact with departments to improve safety, maintenance, efficiency, and productivity. Must adhere to and develop department SOP's, quality compliance GMP's, and other established procedures.Responsibilities:Provide leadership and coordination to a team of up to 8 Clean Room TechniciansResponsible for managing time and attendance tracking for Clean Room TechniciansEnsure training is accurate and updated. Complete training record documentation in a timely manner.Assign duties and conduct employee performance reviews and routine weekly feedback sessions.Work with the coordinator to ensure resources are available and scheduled to cover all planned cleaning activities for GMP and non-GMP spaces.Adjust to schedule changes, work overtime as needed, and be willing to support others as needed. Be willing to adjust workload to accommodate rush requests.Track Environmental Monitoring hits and work with Technicians to determine possible causes and preventative actions.Provide excellent internal customer service.Ensure Technicians are correctly using SAP, and stocking gowning and cleaning supplies as needed.Promote and comply with all Environmental Health and Safety (EHS) policies, OSHA, and any other safety requirements, equipment procedures, and chemical handling guidelines. Trains Technicians on appropriate safety requirements, equipment procedures, and chemical handling guidelines.Ensure Technicians are wearing PPE while performing the job and report any ongoing noncompliance to manager and EHS.Supports and enforces company policies, practices and GMP procedures. Accurately review all documentation per established procedures.Mechanical aptitude with ability to understand and conduct light maintenance on cleaning equipment and to comply with quality procedures and change controls.Submits work requests for Clean Room equipment maintenance and repairs when needed.Responsible for meeting with service vendors and suppliers.Working hours: Various Shifts AvailableSkills:Demonstrated leadership, coaching and mentoring skills.Experience with training others to perform and maintain cGMP standards. Experience working in a cleanroom environment in full sterile room gowning and good aseptic technique.Must be able to work a flexible schedule, and be willing to work outside normal, scheduled hours, as needed. Must be able to work alternative shift hours and weekends as needed to align with manufacturing quality activities.Must have excellent oral and written communication skills, and be proactive in interacting with colleagues in a variety of roles and functions.Excellent problem solving skills, and strong time management and organizational skillsStrong teamwork skills.Good self-discipline and attention to detail.Must have demonstrated understanding of hazard awareness, accident prevention, and safety compliance. Safety and following safety procedures must be a priority.Education:High SchoolExperience:4-7 yearsQualifications:Associate's Degree with 6 ye
      Spherion Staffing has partnered with a leading biotechnology company in College Station, TX to recruit for this role. The primary purpose of this role is to ensure sterile manufacturing facilities and common areas are cleaned, decontaminated, and disinfected according to established cGMP requirements. This role will be responsible for administrative duties, record keeping, material and supplies management, coordination of personnel work activities, troubleshooting, scheduling, and employee performance. Must be flexible to respond to changing priorities and handle changing workflow, including working on multiple projects at multiple sites and/or a flexible schedule as directed by the Shift Operations Manager.Must be able to excel in a team-oriented environment and be able to interact with departments to improve safety, maintenance, efficiency, and productivity. Must adhere to and develop department SOP's, quality compliance GMP's, and other established procedures.Responsibilities:Provide leadership and coordination to a team of up to 8 Clean Room TechniciansResponsible for managing time and attendance tracking for Clean Room TechniciansEnsure training is accurate and updated. Complete training record documentation in a timely manner.Assign duties and conduct employee performance reviews and routine weekly feedback sessions.Work with the coordinator to ensure resources are available and scheduled to cover all planned cleaning activities for GMP and non-GMP spaces.Adjust to schedule changes, work overtime as needed, and be willing to support others as needed. Be willing to adjust workload to accommodate rush requests.Track Environmental Monitoring hits and work with Technicians to determine possible causes and preventative actions.Provide excellent internal customer service.Ensure Technicians are correctly using SAP, and stocking gowning and cleaning supplies as needed.Promote and comply with all Environmental Health and Safety (EHS) policies, OSHA, and any other safety requirements, equipment procedures, and chemical handling guidelines. Trains Technicians on appropriate safety requirements, equipment procedures, and chemical handling guidelines.Ensure Technicians are wearing PPE while performing the job and report any ongoing noncompliance to manager and EHS.Supports and enforces company policies, practices and GMP procedures. Accurately review all documentation per established procedures.Mechanical aptitude with ability to understand and conduct light maintenance on cleaning equipment and to comply with quality procedures and change controls.Submits work requests for Clean Room equipment maintenance and repairs when needed.Responsible for meeting with service vendors and suppliers.Working hours: Various Shifts AvailableSkills:Demonstrated leadership, coaching and mentoring skills.Experience with training others to perform and maintain cGMP standards. Experience working in a cleanroom environment in full sterile room gowning and good aseptic technique.Must be able to work a flexible schedule, and be willing to work outside normal, scheduled hours, as needed. Must be able to work alternative shift hours and weekends as needed to align with manufacturing quality activities.Must have excellent oral and written communication skills, and be proactive in interacting with colleagues in a variety of roles and functions.Excellent problem solving skills, and strong time management and organizational skillsStrong teamwork skills.Good self-discipline and attention to detail.Must have demonstrated understanding of hazard awareness, accident prevention, and safety compliance. Safety and following safety procedures must be a priority.Education:High SchoolExperience:4-7 yearsQualifications:Associate's Degree with 6 ye
      • Fargo, North Dakota
      • Permanent
      • $40,000 - $58,000 per year
      • Various Shifts Available
      Spherion Staffing is looking for someone who is a strong leader and effective communicator with previous manufacturing supervisory experience and strong problem solving skills to fill the role of Production Supervisor. This position would directly supervise and coordinate the activities of production and operating workers in a warehousing and delivery distribution environment. Salary $40-58k/year DOEResponsibilities:- Manage operations with a focus on safety- Manage the logistics of a manufacturing environment and ensure activities maximize operational efficiency while managing costs- Manage production staff daily and ensure safety compliance standards- Coordinate the routine maintenance and repairs of equipment- Maintain all preventative maintenance and safety inspection records in compliance with OSHA guidelines- Coordinate all required safety training activities- Coordinate and perform all aspects of shipping and receiving to assure best arrangement of raw and finished materials- Assist in safety investigations identified through near miss reporting when required- Support company's safety standards and best practices to ensure zero lost time injuries- Ensure adherence to Health & Safety policy and practices at all timesResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-A minimum of two years of manufacturing experience, preferably in an agriculture industry-Bachelor's degree in a Business related field (engineering a plus)-Lean Six Sigma Greenbelt Certification is preferred, but not required-Proficient in Microsoft Word and Excel, along with email and internet usage-Possess analytical skills and experience-Must be able to work well with others, train and supervise staff, multi-task effectively and prioritize workloadEducation:BachelorsExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/fargo If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for someone who is a strong leader and effective communicator with previous manufacturing supervisory experience and strong problem solving skills to fill the role of Production Supervisor. This position would directly supervise and coordinate the activities of production and operating workers in a warehousing and delivery distribution environment. Salary $40-58k/year DOEResponsibilities:- Manage operations with a focus on safety- Manage the logistics of a manufacturing environment and ensure activities maximize operational efficiency while managing costs- Manage production staff daily and ensure safety compliance standards- Coordinate the routine maintenance and repairs of equipment- Maintain all preventative maintenance and safety inspection records in compliance with OSHA guidelines- Coordinate all required safety training activities- Coordinate and perform all aspects of shipping and receiving to assure best arrangement of raw and finished materials- Assist in safety investigations identified through near miss reporting when required- Support company's safety standards and best practices to ensure zero lost time injuries- Ensure adherence to Health & Safety policy and practices at all timesResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-A minimum of two years of manufacturing experience, preferably in an agriculture industry-Bachelor's degree in a Business related field (engineering a plus)-Lean Six Sigma Greenbelt Certification is preferred, but not required-Proficient in Microsoft Word and Excel, along with email and internet usage-Possess analytical skills and experience-Must be able to work well with others, train and supervise staff, multi-task effectively and prioritize workloadEducation:BachelorsExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/fargo If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $20.05 - $23.00 per hour
      • 6:00 AM - 6:00 PM
      Repair and maintain a variety of machinery equipment located within the main plant. Demonstrate a steady, upward progression of skills and ability to do increasingly difficult tasks, the abilities will include but not be limited to the following:Responsibilities:Assist with the efficient flow of product through the assigned area and the major repair and maintenance of all machinery in the assigned area.Work with seasonal employees in their day ? to ? day dutiesHandle minor personnel problems. Refer major problems to the Supervisor / Operation MangerIn the off season, will be involved in any number of maintenance activities including machine repair/overhaul, cleaning, building walkways and work platforms, and assisting in the installation of new processing equipment.Must possess a complete set of tools for industrial maintenance.Must have general knowledge of gas and arc welding, how to cut and thread pipe, bolt and thread sizes, how to fasten pulleys and sprockets on shafts and how to adjust conveyors.Experience with hydraulics and pneumaticsAbility to read precision instruments and blue prints Ability to order parts, communicate with the suppliers and service reps from equipment companies.Maintain work area in a clean and orderly manner.May perform other duties as assigned by the SupervisorAdhere to all Company policies and proceduresNotify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Ability to fabricate equipment / ability to use basic shop mathWorking hours: 6:00 AM - 6:00 PMSkills:Knowledge:-One year related experience and / or trainingLanguage Skills:-Ability to read, write and speak EnglishReasoning Ability:-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.TEAMWORK:-Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or general education degree (GED)While performing the duties of this job, the employee is regularly required to: stand, walk, use hands and fingers to handle, feel objects, tools, or controls and reach with hands and arms.The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and / or move up to 50-75 pounds.WORK ENVIRONMENT:While performing the duties of this job, the employee occasionally works near moving mechanical parts.The noise level in the work environment is usually high. Direct Hire opportunity with a reputable company! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Repair and maintain a variety of machinery equipment located within the main plant. Demonstrate a steady, upward progression of skills and ability to do increasingly difficult tasks, the abilities will include but not be limited to the following:Responsibilities:Assist with the efficient flow of product through the assigned area and the major repair and maintenance of all machinery in the assigned area.Work with seasonal employees in their day ? to ? day dutiesHandle minor personnel problems. Refer major problems to the Supervisor / Operation MangerIn the off season, will be involved in any number of maintenance activities including machine repair/overhaul, cleaning, building walkways and work platforms, and assisting in the installation of new processing equipment.Must possess a complete set of tools for industrial maintenance.Must have general knowledge of gas and arc welding, how to cut and thread pipe, bolt and thread sizes, how to fasten pulleys and sprockets on shafts and how to adjust conveyors.Experience with hydraulics and pneumaticsAbility to read precision instruments and blue prints Ability to order parts, communicate with the suppliers and service reps from equipment companies.Maintain work area in a clean and orderly manner.May perform other duties as assigned by the SupervisorAdhere to all Company policies and proceduresNotify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Ability to fabricate equipment / ability to use basic shop mathWorking hours: 6:00 AM - 6:00 PMSkills:Knowledge:-One year related experience and / or trainingLanguage Skills:-Ability to read, write and speak EnglishReasoning Ability:-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.TEAMWORK:-Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and company as a whole. Fully participate in TAL by "living" Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or general education degree (GED)While performing the duties of this job, the employee is regularly required to: stand, walk, use hands and fingers to handle, feel objects, tools, or controls and reach with hands and arms.The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and / or move up to 50-75 pounds.WORK ENVIRONMENT:While performing the duties of this job, the employee occasionally works near moving mechanical parts.The noise level in the work environment is usually high. Direct Hire opportunity with a reputable company! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Watertown, South Dakota
      • Permanent
      • $17.00 - $20.00 per hour
      • 6:00 AM - 2:30 PM
      Spherion Staffing has several openings for Production Technicians. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in a clean and safe production environment.Responsibilities:Job Duties:Perform work as apparent or assigned. This might include but is not limited to the following activities:Assemble products per specifications and prescribed procedures.Set up and operate machines, processes or equipment. Monitor life of tooling and sharpen toolsPerform inspections, tests and audits on processes, products and components. Diagnose faults, conduct repairs, and utilize appropriate measuring, inspection and test equipment and procedures to assure consistency in parts produced.Insure that all parts meet specifications, finishes and special handling requirements utilizing appropriate documentation.Utilize proper storage, handling and disposal methods of all materials, including hazardous material when applicable.Assist in maintaining department supplies and consumables.Assist in the operation of the waste water treatment system to ensure effluents meet EPA parameters. Assist with the filing of all required EPA reporting.Supports the department and continuous improvement concepts by suggesting changes and improvements.Keep department and machines clean and orderly, and maintain housekeeping requirements.Perform work in a safe manner by following safety rules and insuring that proper safety equipment is used.Troubleshoot, maintain and perform routine maintenance / preventative maintenance on department machines and equipment. Maintain department records per established procedures.Seeks and recommends ways to eliminate potential quality problems, to improve procedures and methods, and to increase productivity using the Quality Management System (policy, procedure, work instructions).Working hours: 6:00 AM - 2:30 PMSkills:see aboveEducation:High SchoolExperience:0-1 yearsQualifications:Qualifications:High school diploma or GED.Physical ability to lift, carry and maneuver 65 pounds. Physical ability to stand all day.Demonstrated ability to read and interpret all applicable blueprints, schematics and diagrams.Demonstrated ability to work in a cooperative and team oriented environment.Demonstrated ability to communicate (verbal/written) effectively with customers, suppliers and other employees. To be considered for this position please call or email Greg Stafford 605-335-6010 or gregorystafford@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has several openings for Production Technicians. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in a clean and safe production environment.Responsibilities:Job Duties:Perform work as apparent or assigned. This might include but is not limited to the following activities:Assemble products per specifications and prescribed procedures.Set up and operate machines, processes or equipment. Monitor life of tooling and sharpen toolsPerform inspections, tests and audits on processes, products and components. Diagnose faults, conduct repairs, and utilize appropriate measuring, inspection and test equipment and procedures to assure consistency in parts produced.Insure that all parts meet specifications, finishes and special handling requirements utilizing appropriate documentation.Utilize proper storage, handling and disposal methods of all materials, including hazardous material when applicable.Assist in maintaining department supplies and consumables.Assist in the operation of the waste water treatment system to ensure effluents meet EPA parameters. Assist with the filing of all required EPA reporting.Supports the department and continuous improvement concepts by suggesting changes and improvements.Keep department and machines clean and orderly, and maintain housekeeping requirements.Perform work in a safe manner by following safety rules and insuring that proper safety equipment is used.Troubleshoot, maintain and perform routine maintenance / preventative maintenance on department machines and equipment. Maintain department records per established procedures.Seeks and recommends ways to eliminate potential quality problems, to improve procedures and methods, and to increase productivity using the Quality Management System (policy, procedure, work instructions).Working hours: 6:00 AM - 2:30 PMSkills:see aboveEducation:High SchoolExperience:0-1 yearsQualifications:Qualifications:High school diploma or GED.Physical ability to lift, carry and maneuver 65 pounds. Physical ability to stand all day.Demonstrated ability to read and interpret all applicable blueprints, schematics and diagrams.Demonstrated ability to work in a cooperative and team oriented environment.Demonstrated ability to communicate (verbal/written) effectively with customers, suppliers and other employees. To be considered for this position please call or email Greg Stafford 605-335-6010 or gregorystafford@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Sumterville, Florida
      • Permanent
      • $18.00 - $20.00 per hour
      • 4:00 AM - 2:00 PM
      Spherion Staffing Leesburg, FL has teamed up with a growing cement production plant located in Sumterville and are looking for Heavy Equipment Operators. This is a direct-hire opportunity.The schedule rotates days and nights ( 4 am to 2 pm and 2 pm to 12 am), and the facility is open 7 days a week so you will have a rotating schedule. The starting pay rate is $18-$20/hr DOE.Responsibilities:- Safely, responsibly, and proficiently operates and loads equipment for the movement of raw materials to and around the plant.- Performs daily inspections and maintenance of equipment (greases, oils, makes repairs)- Removes build-up from under or around quarry crushers, beltlines, and reclaimers.- Follows all safety procedures and traffic patternsWorking hours: 4:00 AM - 2:00 PMSkills:- Ability to perform physical tasks including driving, walking, climbing equipment, working in confined spaces, and lifting up to 50 lbs.- Must be available to work overtime and on-call- Read, Write, and Speak English- Must be able to work outdoors in all climates and weather conditionsEducation:High SchoolExperience:1-4 yearsQualifications:- Minimum 2 years experience operating heavy equipment- Valid drivers license- High school diploma or equivalent Apply today with your resume or call/text our office at 352-728-8787.Spherion Leesburg1710 Citrus Blvd. Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing Leesburg, FL has teamed up with a growing cement production plant located in Sumterville and are looking for Heavy Equipment Operators. This is a direct-hire opportunity.The schedule rotates days and nights ( 4 am to 2 pm and 2 pm to 12 am), and the facility is open 7 days a week so you will have a rotating schedule. The starting pay rate is $18-$20/hr DOE.Responsibilities:- Safely, responsibly, and proficiently operates and loads equipment for the movement of raw materials to and around the plant.- Performs daily inspections and maintenance of equipment (greases, oils, makes repairs)- Removes build-up from under or around quarry crushers, beltlines, and reclaimers.- Follows all safety procedures and traffic patternsWorking hours: 4:00 AM - 2:00 PMSkills:- Ability to perform physical tasks including driving, walking, climbing equipment, working in confined spaces, and lifting up to 50 lbs.- Must be available to work overtime and on-call- Read, Write, and Speak English- Must be able to work outdoors in all climates and weather conditionsEducation:High SchoolExperience:1-4 yearsQualifications:- Minimum 2 years experience operating heavy equipment- Valid drivers license- High school diploma or equivalent Apply today with your resume or call/text our office at 352-728-8787.Spherion Leesburg1710 Citrus Blvd. Ste 1 & 2Leesburg, FL 34748Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.00 - $35.00 per hour
      • 6:00 AM - 6:00 PM
      Operate and maintain the boiler generation system, air compressor and fire sprinkler system.Responsibilities:Troubleshoot boiler equipment, dealkalizers system, air compressors, and fire sprinkler systems and make the necessary repairs.Analyze and interpret the chemical composition of the boiler water.Maintain accurate records of boiler operations.Must know how to weld and use a cutting torch. Should have a thorough knowledge of pipe threading and welding. Should know the ratings for SCH 40 and SCH 80 pipe, both black and galvanized.Must have a thorough knowledge of all plant steam generation systems and equipment. Must know how to operate and service all steam heating units and steam water-heating units. Must know how to run all chemical tests necessary to operate the boiler.Ability to keep all boilers operating as plant load dictates, monitor boilers, water levels, check water quantities of softeners and dealkalizers and equipment is working properly.Ability to make necessary repairs in the boiler room as needed and maintain safety / efficiency of the boiler room.Boiler operator will monitor doors and lights when plant is not in operations, also includes fire alarm system during shift.Boiler operator will be assigned to work and assist in the cooker jams, repairs or adjustments.Must possess a complete set of tools for mechanical maintenance.Must be able to work independently on all equipment. Should require no supervision.Must be familiar with standard boiler safety procedures, state laws governing boiler safety, and all company safety policies.Back up to Chief Engineer for on call status.Properly maintain / perform preventive maintenance on all heating ventilation and cooling equipment (HVAC).All boiler operators will adhere to instructions from the assigned boiler chief in charge.Boiler operators may be assigned work duties from their manager or chief in charge.Boiler operators will monitor all air systems and vacuum systems where applicable and make necessary arrangements to maintain an adequate air supply and check for excess moisture in the system and bleed system if needed.Maintain work area in a clean and orderly manner. May perform other duties as assigned by the Supervisor. Adhere to all Lakeside Foods policies and procedures.Notify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Working hours: 6:00 AM - 6:00 PMSkills:Language Skills:--Ability to read and to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: --Ability to apply common sense understanding to carry out instructions furnished in written and oral, or diagram form.--Ability to deal with problems involving several concrete variables in standardized situations.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and Lakeside as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand; walk; use hands and fingers to handle or feel objects, tools, or controls and reach with hands and arms. --The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.--The employee must regularly lift and/or move up to 50 po
      Operate and maintain the boiler generation system, air compressor and fire sprinkler system.Responsibilities:Troubleshoot boiler equipment, dealkalizers system, air compressors, and fire sprinkler systems and make the necessary repairs.Analyze and interpret the chemical composition of the boiler water.Maintain accurate records of boiler operations.Must know how to weld and use a cutting torch. Should have a thorough knowledge of pipe threading and welding. Should know the ratings for SCH 40 and SCH 80 pipe, both black and galvanized.Must have a thorough knowledge of all plant steam generation systems and equipment. Must know how to operate and service all steam heating units and steam water-heating units. Must know how to run all chemical tests necessary to operate the boiler.Ability to keep all boilers operating as plant load dictates, monitor boilers, water levels, check water quantities of softeners and dealkalizers and equipment is working properly.Ability to make necessary repairs in the boiler room as needed and maintain safety / efficiency of the boiler room.Boiler operator will monitor doors and lights when plant is not in operations, also includes fire alarm system during shift.Boiler operator will be assigned to work and assist in the cooker jams, repairs or adjustments.Must possess a complete set of tools for mechanical maintenance.Must be able to work independently on all equipment. Should require no supervision.Must be familiar with standard boiler safety procedures, state laws governing boiler safety, and all company safety policies.Back up to Chief Engineer for on call status.Properly maintain / perform preventive maintenance on all heating ventilation and cooling equipment (HVAC).All boiler operators will adhere to instructions from the assigned boiler chief in charge.Boiler operators may be assigned work duties from their manager or chief in charge.Boiler operators will monitor all air systems and vacuum systems where applicable and make necessary arrangements to maintain an adequate air supply and check for excess moisture in the system and bleed system if needed.Maintain work area in a clean and orderly manner. May perform other duties as assigned by the Supervisor. Adhere to all Lakeside Foods policies and procedures.Notify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Working hours: 6:00 AM - 6:00 PMSkills:Language Skills:--Ability to read and to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: --Ability to apply common sense understanding to carry out instructions furnished in written and oral, or diagram form.--Ability to deal with problems involving several concrete variables in standardized situations.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and Lakeside as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand; walk; use hands and fingers to handle or feel objects, tools, or controls and reach with hands and arms. --The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.--The employee must regularly lift and/or move up to 50 po
      • Brookings, South Dakota
      • Permanent
      • $15.00 - $20.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion Staffing is looking for a CNC Machinist to work with a client in the Brookings, SD area. The CNC Machinist will operate CNC machines to safely produce parts that meet company objectives for safety, quality and productivity while machining centers to fabricate metallic and nonmetallic parts. Qualified applicants should have a 1-2 year certificate from college or a technical school along with 1-2 years related experience or training. Direct Hire Opportunity$15-20/ hour DOEMonday - Friday 8 am- 5 pm Responsibilities:-Operate a variety of CNC machines -Set up and operates machine to verify accuracy of machine settings or programmed control data-Operate metal welding equipment to rebuild or fabricate parts-Set up and operates machine on trial run to verify accuracy of machine settings or programmed control data-Verify conformance of finished work piece to specifications-Work cooperatively with Production and Maintenance personnel in troubleshooting manufacturing problems-Participate in ordering supplies and other materials-Manage vendors when outsourced work is required for specific projects-Develop and adhere to project timelines and give periodic reports-Adjust tools and replace as necessary while maintaining a clean, safe work area-Perform daily maintenance of machines-Perform side operations during machine cycle time as required-Other duties as assignedResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Certificate from college or Technical School-1-2 years related Machinist experience-Read and understand CNC programs -Read and understand layouts and blueprints-Perform operations under minimum supervisor and maintain performance levels-Understanding of safety rules and regulationsBenefits: -Paid time off-401K-Tuition reimbursement-Wellness programs-Short / long term disability-Dental -Prescription coverageEducation:TradeExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for a CNC Machinist to work with a client in the Brookings, SD area. The CNC Machinist will operate CNC machines to safely produce parts that meet company objectives for safety, quality and productivity while machining centers to fabricate metallic and nonmetallic parts. Qualified applicants should have a 1-2 year certificate from college or a technical school along with 1-2 years related experience or training. Direct Hire Opportunity$15-20/ hour DOEMonday - Friday 8 am- 5 pm Responsibilities:-Operate a variety of CNC machines -Set up and operates machine to verify accuracy of machine settings or programmed control data-Operate metal welding equipment to rebuild or fabricate parts-Set up and operates machine on trial run to verify accuracy of machine settings or programmed control data-Verify conformance of finished work piece to specifications-Work cooperatively with Production and Maintenance personnel in troubleshooting manufacturing problems-Participate in ordering supplies and other materials-Manage vendors when outsourced work is required for specific projects-Develop and adhere to project timelines and give periodic reports-Adjust tools and replace as necessary while maintaining a clean, safe work area-Perform daily maintenance of machines-Perform side operations during machine cycle time as required-Other duties as assignedResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Certificate from college or Technical School-1-2 years related Machinist experience-Read and understand CNC programs -Read and understand layouts and blueprints-Perform operations under minimum supervisor and maintain performance levels-Understanding of safety rules and regulationsBenefits: -Paid time off-401K-Tuition reimbursement-Wellness programs-Short / long term disability-Dental -Prescription coverageEducation:TradeExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Alexandria, South Dakota
      • Permanent
      • $20.00 - $25.00 per hour
      • 6:30 AM - 5:00 PM
      Spherion Staffing is looking for an experienced welder for a company located in Alexandria, SD. Shifts:Monday - Thursday 6:30AM - 5PM, overtime may be requiredPay: $20-25/hour DOE Responsibilities:-Read and understand blueprints-Read and understand weld symbols-MIG & TIG welding experience, preferred-Assist win other areas of fabrication-Cleaning and maintenance duties as required-Other duties as assigned by weld leadResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -1 year experience or schooling -Organized, self- motivated and strong communication skills -Lifting up to 50 pounds-Must have basic math skills-Ability to review designs and drawingsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for an experienced welder for a company located in Alexandria, SD. Shifts:Monday - Thursday 6:30AM - 5PM, overtime may be requiredPay: $20-25/hour DOE Responsibilities:-Read and understand blueprints-Read and understand weld symbols-MIG & TIG welding experience, preferred-Assist win other areas of fabrication-Cleaning and maintenance duties as required-Other duties as assigned by weld leadResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -1 year experience or schooling -Organized, self- motivated and strong communication skills -Lifting up to 50 pounds-Must have basic math skills-Ability to review designs and drawingsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mansfield, Ohio
      • Permanent
      The Professional Division of Spherion Mid Ohio is partnered with a manufacturer in Mansfield, Ohio, seeking to add an ERP Analyst to their team! This position will work with multiple departments to implement, monitor, and maintain system solutions.  **This is a direct hire opportunities; never go through a temp-to-hire process!** The ERP Analyst will:   • SME for all things Plex - Production, quality, inventory, purchasing, maintenance, tooling, engineering, HR, accounting, shipping/receiving, EDI, sales  • Use Plex resources to implement new processes/features  • Act as support for all dept Open support cases w/ Plex as needed  • Create custom reports for management/supervision using Intelliplex, SQL, Visionplex, etc.  • Lead monthly meetings and/or present date to management  • Assist w/ Plex training Requirements • Strong excel skills  • Communication skills  • Some experience in manufacturing  • Problem solver  • Strong computer skills/knowledge   Minimum Requirements:  • Strong computer skills  • Strong communication skills  • Basic knowledge of database query language, e.g. SQL   Description of Responsibilities:  • Testing system to find best solution  • Trouble shooting Plex issues  • Training employees  • Report writing/building  • Module implementation  • Plex training
      The Professional Division of Spherion Mid Ohio is partnered with a manufacturer in Mansfield, Ohio, seeking to add an ERP Analyst to their team! This position will work with multiple departments to implement, monitor, and maintain system solutions.  **This is a direct hire opportunities; never go through a temp-to-hire process!** The ERP Analyst will:   • SME for all things Plex - Production, quality, inventory, purchasing, maintenance, tooling, engineering, HR, accounting, shipping/receiving, EDI, sales  • Use Plex resources to implement new processes/features  • Act as support for all dept Open support cases w/ Plex as needed  • Create custom reports for management/supervision using Intelliplex, SQL, Visionplex, etc.  • Lead monthly meetings and/or present date to management  • Assist w/ Plex training Requirements • Strong excel skills  • Communication skills  • Some experience in manufacturing  • Problem solver  • Strong computer skills/knowledge   Minimum Requirements:  • Strong computer skills  • Strong communication skills  • Basic knowledge of database query language, e.g. SQL   Description of Responsibilities:  • Testing system to find best solution  • Trouble shooting Plex issues  • Training employees  • Report writing/building  • Module implementation  • Plex training
      • Conroe, Texas
      • Permanent
      • $26.00 - $29.00 per hour
      • 6:00 AM - 6:00 PM
      Spherion is seeking an experienced Manufacturing Automation Technician.Responsibilities:Required to be in the assembly rooms during their scheduled shift to ensure that the equipment is running as designed. Responsible for the day-to-day operation of the equipment including routine maintenance and upkeep of the equipment.Provide necessary training to other employees as required to ensure standardized methods are created and used for basic operation of equipment including start up, shut down and basic troubleshooting to resolve cycle interruptions.Working hours: 6:00 AM - 6:00 PMSkills:Able to understand and execute approved validations (IQ,OQ and PQ)Prepare and conduct statistical analysis (CPK, DOE and Gage R&R)Effectively communicate between engineering and manufacturing teamsParticipate in LEAN and continuous improvement eventsEducation:High SchoolExperience:4-7 yearsQualifications:High School Diploma/GED3+ years experience is similar field Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is seeking an experienced Manufacturing Automation Technician.Responsibilities:Required to be in the assembly rooms during their scheduled shift to ensure that the equipment is running as designed. Responsible for the day-to-day operation of the equipment including routine maintenance and upkeep of the equipment.Provide necessary training to other employees as required to ensure standardized methods are created and used for basic operation of equipment including start up, shut down and basic troubleshooting to resolve cycle interruptions.Working hours: 6:00 AM - 6:00 PMSkills:Able to understand and execute approved validations (IQ,OQ and PQ)Prepare and conduct statistical analysis (CPK, DOE and Gage R&R)Effectively communicate between engineering and manufacturing teamsParticipate in LEAN and continuous improvement eventsEducation:High SchoolExperience:4-7 yearsQualifications:High School Diploma/GED3+ years experience is similar field Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Willard, Ohio
      • Permanent
      • $17.00 - $20.00 per hour
      The Professional Division of Spherion Mid Ohio is partnered with a nationally recognized organization in Willard, Ohio that is seeking a CONTRACT CAD Designer to join their team part time for a minimum of six months! This is a great time to grow in your experience and use this opportunity as a resume builder! Pay Range: $17-$20 per hour Part-time Hours: 20-30 hours per week (during AM shifts); flexible on days/hours – perfect for someone continuing to pursue their education or get back into the workforce. Potential for full time hours if needed.    Job Duties: CAD Support, Uses CAD to develop 2d and 3d Designs Create design concept drawings Work with maintenance, engineering and contractors to revise existing drawings Make sketch of proposed drawings, check dimension of parts, materials to be used, relationship of one part to another, and relationship of various parts to whole structure or project. All current work being completed in AutoCAD – must be comfortable and familiar with AutoCAD and be able to work independently. Project Planning Effectively manage and implement small projects up to $50,000. Collaboration with plant resources to balance schedules, plan work, and assets to execute projects. General Work with minimal supervision Must communicate accurately with co-workers Work with others with an attitude of cooperation and respect
      The Professional Division of Spherion Mid Ohio is partnered with a nationally recognized organization in Willard, Ohio that is seeking a CONTRACT CAD Designer to join their team part time for a minimum of six months! This is a great time to grow in your experience and use this opportunity as a resume builder! Pay Range: $17-$20 per hour Part-time Hours: 20-30 hours per week (during AM shifts); flexible on days/hours – perfect for someone continuing to pursue their education or get back into the workforce. Potential for full time hours if needed.    Job Duties: CAD Support, Uses CAD to develop 2d and 3d Designs Create design concept drawings Work with maintenance, engineering and contractors to revise existing drawings Make sketch of proposed drawings, check dimension of parts, materials to be used, relationship of one part to another, and relationship of various parts to whole structure or project. All current work being completed in AutoCAD – must be comfortable and familiar with AutoCAD and be able to work independently. Project Planning Effectively manage and implement small projects up to $50,000. Collaboration with plant resources to balance schedules, plan work, and assets to execute projects. General Work with minimal supervision Must communicate accurately with co-workers Work with others with an attitude of cooperation and respect
    30 of 53 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.