Thank you for subscribing to your personalized job alerts.

    12 jobs found in assonet, massachusetts

    Filter2
    Clear all
      • Plympton, Massachusetts
      • Temp to Perm
      • $20.00 - $24.00 per hour
      • 3:30 PM - 12:00 AM
      Spherion Staffing has partnered with Hubbell Lighting in Plympton, MA!Responsibilities:- Manages the Sheet Metal Fabrication Department consisting of sheet metal punching and forming equipment including but not limited to automated Salvagnini punch/panel bending fabrication cells, NC turret presses, Punch presses, and press brakes.- Additional Fabrication management includes heat exchanger coil fabrication and copper tubing cut off/bending.- Ensure Customer/Assembly is supplied all components in planned lead time and meeting required quality specifications and determine root causes/develop effective corrective actions to eliminate and/or improve issues impacting supply to your customer.- Measure OEE and develop improvements to lead department to World Class manufacturing.- Determine job procedures and training requirements.- Arrange for required tools, parts, and supplies.- Assign work and instruct personnel.- Communicate and coordinate with plant personnel and outside contractors as required.- Instruct trainees and support personnel in performance of their duties.- Confer with the Operations/Production Manager to establish work schedules for assigned department, organizing workflow for maximum efficiency based on daily production schedule.- Assure that all machinery, equipment and facilities are properly maintained for production process and kept in acceptable safe working condition.- Supervise, train, assign and check work of employees to ensure compliance with guidelines, analyze and resolve work problems and/or assist workers with problem resolution.- Maintain daily production reports, attendance records, performance charts and documentation to support significant events.- Hold daily departmental meetings weekly to communicate general information and departmental achievements.- Ensure DFT methodology is being utilized, including certification, flexing, material replenishment signals, performing quality checks, and performing work to the time established.- Manage performance data, employee development, and lead the corrective action process for improvement on any negative trends.- Support plant lean initiatives, and continual improvement methodologies.Working hours: 3:30 PM - 12:00 AMSkills:- Knowledgeable of fabrication processes/operations and able to operate the majority of fabrication equipment.- Communication skills, ability to foster teamwork and manage diverse groups of people.- Knowledge of Microsoft Office and ERP systems (such as SAP).- Ability to work under pressure and meet deadlines.Education:High SchoolExperience:4-7 yearsQualifications:- Must have a minimum of three (3) years of experience in a manufacturing environment. Specifically, sheet metal fabrication and heavy equipment assembly or sequencing parts in a customizable assembly process.- Supervisory experience in a manufacturing/warehousing facility with proven ability to effectively manage multiple departments simultaneously.- Position requires physical activity, walking, lifting and bending. This is a temp to perm opportunity. Apply online today at www.spherion.com/apply. Office: 75038 or call in at 508-991-8170 and ask for Emily.We offer an excellent referral bonus program, as well as health insurance benefits for those who qualify.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ance
      Spherion Staffing has partnered with Hubbell Lighting in Plympton, MA!Responsibilities:- Manages the Sheet Metal Fabrication Department consisting of sheet metal punching and forming equipment including but not limited to automated Salvagnini punch/panel bending fabrication cells, NC turret presses, Punch presses, and press brakes.- Additional Fabrication management includes heat exchanger coil fabrication and copper tubing cut off/bending.- Ensure Customer/Assembly is supplied all components in planned lead time and meeting required quality specifications and determine root causes/develop effective corrective actions to eliminate and/or improve issues impacting supply to your customer.- Measure OEE and develop improvements to lead department to World Class manufacturing.- Determine job procedures and training requirements.- Arrange for required tools, parts, and supplies.- Assign work and instruct personnel.- Communicate and coordinate with plant personnel and outside contractors as required.- Instruct trainees and support personnel in performance of their duties.- Confer with the Operations/Production Manager to establish work schedules for assigned department, organizing workflow for maximum efficiency based on daily production schedule.- Assure that all machinery, equipment and facilities are properly maintained for production process and kept in acceptable safe working condition.- Supervise, train, assign and check work of employees to ensure compliance with guidelines, analyze and resolve work problems and/or assist workers with problem resolution.- Maintain daily production reports, attendance records, performance charts and documentation to support significant events.- Hold daily departmental meetings weekly to communicate general information and departmental achievements.- Ensure DFT methodology is being utilized, including certification, flexing, material replenishment signals, performing quality checks, and performing work to the time established.- Manage performance data, employee development, and lead the corrective action process for improvement on any negative trends.- Support plant lean initiatives, and continual improvement methodologies.Working hours: 3:30 PM - 12:00 AMSkills:- Knowledgeable of fabrication processes/operations and able to operate the majority of fabrication equipment.- Communication skills, ability to foster teamwork and manage diverse groups of people.- Knowledge of Microsoft Office and ERP systems (such as SAP).- Ability to work under pressure and meet deadlines.Education:High SchoolExperience:4-7 yearsQualifications:- Must have a minimum of three (3) years of experience in a manufacturing environment. Specifically, sheet metal fabrication and heavy equipment assembly or sequencing parts in a customizable assembly process.- Supervisory experience in a manufacturing/warehousing facility with proven ability to effectively manage multiple departments simultaneously.- Position requires physical activity, walking, lifting and bending. This is a temp to perm opportunity. Apply online today at www.spherion.com/apply. Office: 75038 or call in at 508-991-8170 and ask for Emily.We offer an excellent referral bonus program, as well as health insurance benefits for those who qualify.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ance
      • New Bedford, Massachusetts
      • Temp to Perm
      • $17.51 - $18.56 per hour
      • 7:00 AM - 7:00 AM (Various Shifts Available)
      Spherion is looking for experienced machine operators interested in working at Acushnet Company in New Bedford, MA. These are temporary positions with the chance of being hired by the company so it is an excellent opportunity to get your foot in the door with a great company!Responsibilities:-Complete one step of the manufacturing process to create golf balls out of slabs of rubber to finish product.Working hours: 7:00 AM - 7:00 AM (Various Shifts Available)Skills:-Must have the ability to work and succeed in a drug and tobacco free team environment-Ability to stand for prolonged periods on your feet-Ability to work in a fast paced environment-Ability to lift up to 40lbs-Ability to use a computer to enter dataEducation:High SchoolExperience:0-1 yearsQualifications:-Must have at least 1 year of full time work history-Previous machine operator experience preferred While working through Spherion you are eligible for the following benefits:-Medical-Dental-Vision-Paid HolidaysSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is looking for experienced machine operators interested in working at Acushnet Company in New Bedford, MA. These are temporary positions with the chance of being hired by the company so it is an excellent opportunity to get your foot in the door with a great company!Responsibilities:-Complete one step of the manufacturing process to create golf balls out of slabs of rubber to finish product.Working hours: 7:00 AM - 7:00 AM (Various Shifts Available)Skills:-Must have the ability to work and succeed in a drug and tobacco free team environment-Ability to stand for prolonged periods on your feet-Ability to work in a fast paced environment-Ability to lift up to 40lbs-Ability to use a computer to enter dataEducation:High SchoolExperience:0-1 yearsQualifications:-Must have at least 1 year of full time work history-Previous machine operator experience preferred While working through Spherion you are eligible for the following benefits:-Medical-Dental-Vision-Paid HolidaysSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fairhaven, Massachusetts
      • Temp to Perm
      • $22.00 - $25.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion is looking for a Product Operations Coordinator interested in a contract position working at Acushnet Company. The position is expected to be 12-18 months minimum.Responsibilities:This Product Operations Coordinator role will work closely with US and Far East Development, Marketing, Design and Ops. A successful candidates will be an energetic, detail-oriented individual who will be a key part of the product creation process ensuring our data capture process that support item setup is timely & effective across all stakeholders. This role will also execute product configuration within the ERP system in accordance with global guidelines that will support information-based tools that will deliver planning, insight and communications in order to deliver our Global Go To Market process on time and accurate.Working hours: 8:00 AM - 5:00 PMSkills:Create and update colorways as required adhering to the dates on the Product Creation Calendar. Manage the lifecycle states of colorways as required.Ensure that colorways are confirmed based on the deadline dates published on the Product Creation Calendar.Follow up with factories, compliance and all internal teams to make sure colorways have complete and accurate information before changing lifecycle state to confirmedAGS Item Setup - Execute the creation and maintenance of AGS items and maintenance for all Titleist Gear and Apparel products and programs.Create, Manage and Update Spec Changes - Initiate spec changes and verify with team leader the accuracy of the Spec Change. Communicate the nature of the Spec Change to the factories and internal teams (Dev, PLC, Marketing) to ensure that the information on the Spec Change is complete and accurate prior to submitting for approval (sign-off).Manage the Confirmation Sample Process - Work with Marketing to ensure that Confirmation Samples are addressed as either Approved or Not Approved with appropriate comments - in PLM in a timely manner. Send Confirmation Samples to the library on a seasonal basis.Education:BachelorsExperience:0-1 yearsQualifications:Bachelor's Degree in Computer Science, Business Administration or a related field is required.Prior experience working with ERP system(s)preferred (Infor M3 preferred).Previous experience with Qlik and Ad-Hoc reporting preferred.Advanced skill set in Microsoft Excel, Cognos10 Report Studio and Workspace Advanced a plus.Intermediate to Advanced skill set in Microsoft Office Word and PowerPoint.Previous Golf experience is highly preferred.Knowledge of ERP principles, practices and procedures.Must possess technical skills with the ability to adapt quickly to new and emerging programs/software.Demonstrated competency in the following areas:Project Management -Coordinates projectsCommunicates changes and progressInnovation - Displays original thinking and creativityMeets challenges with resourcefulnessGenerates suggestions for improving workProblem Solving - Identifies and resolves problems in a timely mannerGathers and analyzes information skillfullyDevelops alternative solutionsWorks well in group problem solving situationsUses reason even when dealing with emotional topicsAdaptability - Adapts to changes in the work environmentManages competing demands; Able to deal with frequent change, delays, or unexpected events. While working through Spherion you are eligible for the following benefits:MedicalDentalVisionPaid HolidaysSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Rac
      Spherion is looking for a Product Operations Coordinator interested in a contract position working at Acushnet Company. The position is expected to be 12-18 months minimum.Responsibilities:This Product Operations Coordinator role will work closely with US and Far East Development, Marketing, Design and Ops. A successful candidates will be an energetic, detail-oriented individual who will be a key part of the product creation process ensuring our data capture process that support item setup is timely & effective across all stakeholders. This role will also execute product configuration within the ERP system in accordance with global guidelines that will support information-based tools that will deliver planning, insight and communications in order to deliver our Global Go To Market process on time and accurate.Working hours: 8:00 AM - 5:00 PMSkills:Create and update colorways as required adhering to the dates on the Product Creation Calendar. Manage the lifecycle states of colorways as required.Ensure that colorways are confirmed based on the deadline dates published on the Product Creation Calendar.Follow up with factories, compliance and all internal teams to make sure colorways have complete and accurate information before changing lifecycle state to confirmedAGS Item Setup - Execute the creation and maintenance of AGS items and maintenance for all Titleist Gear and Apparel products and programs.Create, Manage and Update Spec Changes - Initiate spec changes and verify with team leader the accuracy of the Spec Change. Communicate the nature of the Spec Change to the factories and internal teams (Dev, PLC, Marketing) to ensure that the information on the Spec Change is complete and accurate prior to submitting for approval (sign-off).Manage the Confirmation Sample Process - Work with Marketing to ensure that Confirmation Samples are addressed as either Approved or Not Approved with appropriate comments - in PLM in a timely manner. Send Confirmation Samples to the library on a seasonal basis.Education:BachelorsExperience:0-1 yearsQualifications:Bachelor's Degree in Computer Science, Business Administration or a related field is required.Prior experience working with ERP system(s)preferred (Infor M3 preferred).Previous experience with Qlik and Ad-Hoc reporting preferred.Advanced skill set in Microsoft Excel, Cognos10 Report Studio and Workspace Advanced a plus.Intermediate to Advanced skill set in Microsoft Office Word and PowerPoint.Previous Golf experience is highly preferred.Knowledge of ERP principles, practices and procedures.Must possess technical skills with the ability to adapt quickly to new and emerging programs/software.Demonstrated competency in the following areas:Project Management -Coordinates projectsCommunicates changes and progressInnovation - Displays original thinking and creativityMeets challenges with resourcefulnessGenerates suggestions for improving workProblem Solving - Identifies and resolves problems in a timely mannerGathers and analyzes information skillfullyDevelops alternative solutionsWorks well in group problem solving situationsUses reason even when dealing with emotional topicsAdaptability - Adapts to changes in the work environmentManages competing demands; Able to deal with frequent change, delays, or unexpected events. While working through Spherion you are eligible for the following benefits:MedicalDentalVisionPaid HolidaysSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Rac
      • North Dartmouth, Massachusetts
      • Temp to Perm
      • $17.51 per hour
      • 6:00 AM - 2:00 PM
      Spherion is looking for Flex Tooling Associates in New Bedford, MA. This is an excellent opportunity to get your foot in the door with a great company!Responsibilities:-Hobbing cups for experimental and production cavities-Performing multiple assignments throughout the cup manufacturing process-Preparing cup blanks for the hobbing process-Cutting raw material to prepare for the machining process-Required to use basic machine shop measuring toolsWorking hours: 6:00 AM - 2:00 PMSkills:-Use blue prints and schematics-Drills, lathes, millers, etc.-Use/understand measuring devices/tolerances-Use various hand and power tools-Knowledge of hydraulic and/or electrical schematics-Machine shop experience a plus-Perform basic math calculationsEducation:High SchoolExperience:0-1 yearsQualifications:-Must have at least 1 year of full time work history-Must have the ability to work and succeed in a drug and tobacco free team environment-Ability to stand for prolonged periods on your feet-Ability to work in a fast paced environment-Ability to lift up to 40lbs-Ability to use a computer to enter data -Medical-Dental-Vision-PTOSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is looking for Flex Tooling Associates in New Bedford, MA. This is an excellent opportunity to get your foot in the door with a great company!Responsibilities:-Hobbing cups for experimental and production cavities-Performing multiple assignments throughout the cup manufacturing process-Preparing cup blanks for the hobbing process-Cutting raw material to prepare for the machining process-Required to use basic machine shop measuring toolsWorking hours: 6:00 AM - 2:00 PMSkills:-Use blue prints and schematics-Drills, lathes, millers, etc.-Use/understand measuring devices/tolerances-Use various hand and power tools-Knowledge of hydraulic and/or electrical schematics-Machine shop experience a plus-Perform basic math calculationsEducation:High SchoolExperience:0-1 yearsQualifications:-Must have at least 1 year of full time work history-Must have the ability to work and succeed in a drug and tobacco free team environment-Ability to stand for prolonged periods on your feet-Ability to work in a fast paced environment-Ability to lift up to 40lbs-Ability to use a computer to enter data -Medical-Dental-Vision-PTOSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mansfield, Massachusetts
      • Temp to Perm
      • $16.00 per hour
      Production Welder positions are available in Mansfield, Ohio. A local, family owned manufacturing company offers the opportunity for permanent placement and great benefits! Multiple Shift Options! 2nd Shift (3:00pm - 1:00am | M - Th) 4 - 10hr shifts Weekend Warrior (6am – 6pm | Fri – Sun) 3 - 12hr shifts Pay rate = Up to $16.00/hr
      Production Welder positions are available in Mansfield, Ohio. A local, family owned manufacturing company offers the opportunity for permanent placement and great benefits! Multiple Shift Options! 2nd Shift (3:00pm - 1:00am | M - Th) 4 - 10hr shifts Weekend Warrior (6am – 6pm | Fri – Sun) 3 - 12hr shifts Pay rate = Up to $16.00/hr
      • New Bedford, Massachusetts
      • Temp to Perm
      • $15.62 - $16.12 per hour
      • 7:00 AM - 12:00 AM
      A local manufacturer in New Bedford, is looking to add Machine Operators and Assemblers on 1st and 2nd shift to their team! Apply today to be considered.This role is an exciting opportunity to join a global, dynamic, Hi-Tech team, supporting the medical and aerospace industries.Responsibilities:- Perform various tasks as assigned by Department Supervisor. - Perform mechanical and visual inspection of ceramics, metal parts, final product and raw material using hand tools, reticles, micrometers, calipers, optical comparators, dial indicators, cmm?s, vision systems and other standard gauging equipment as required to ensure parts are free of defects as described in procedures, work instructions and methods.- Maintain traceability of final and purchased product at all times by verifying previous operations and other supporting documents such as lab results, MIR cards and C of Cs. - Reads and interprets mechanical drawings, specifications, procedures and inspection sheets as required to complete inspections.- Verify measuring equipment is calibrated properly and alert Supervisor or Manager if equipment validity is in question. - Perform Syteline functions required of Inspectors.- Identify test status, non-conforming material and accepted material by using department procedures and work instructions. - Complete paperwork such as data sheets, lab requests and NCMRs, which may be electronic or hard copy- Complete required read and record data sheets, first article inspections or other documented inspections, as required.- Perform weld inspections using visual inspection procedures and measurement tools. Successfully pass inspection testing for qualification. - Verify previous operations have been completed; rectify before performing inspection.Working hours: 7:00 AM - 12:00 AMSkills:- Working knowledge of basic GD&T symbology, assimilation and measurement methods.- Needs to be OK with SMALL PARTS.- Comfortable using a Microscope, Calibers and Micrometers. - Familiar with computers and Microsoft Applications.- Able to interpret sample size from a standard AQL table.Education:High SchoolExperience:1-4 yearsQualifications:- High School Diploma or equivalent- 1-3 years mechanical inspection experience using a wide variety of equipment and tolerances to at least the 5th decimal point- CMI Certification or equivalent preferred- Comfortable working in a Clean Room Environment.- Ability to work under a microscope for long periods of time and use reticle to perform measurements. This is a temp to perm opportunity located in New Bedford, MA. We have 1st and 2nd shift available.Apply and submit your resume at www.spherion.com/apply (office code 75038)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A local manufacturer in New Bedford, is looking to add Machine Operators and Assemblers on 1st and 2nd shift to their team! Apply today to be considered.This role is an exciting opportunity to join a global, dynamic, Hi-Tech team, supporting the medical and aerospace industries.Responsibilities:- Perform various tasks as assigned by Department Supervisor. - Perform mechanical and visual inspection of ceramics, metal parts, final product and raw material using hand tools, reticles, micrometers, calipers, optical comparators, dial indicators, cmm?s, vision systems and other standard gauging equipment as required to ensure parts are free of defects as described in procedures, work instructions and methods.- Maintain traceability of final and purchased product at all times by verifying previous operations and other supporting documents such as lab results, MIR cards and C of Cs. - Reads and interprets mechanical drawings, specifications, procedures and inspection sheets as required to complete inspections.- Verify measuring equipment is calibrated properly and alert Supervisor or Manager if equipment validity is in question. - Perform Syteline functions required of Inspectors.- Identify test status, non-conforming material and accepted material by using department procedures and work instructions. - Complete paperwork such as data sheets, lab requests and NCMRs, which may be electronic or hard copy- Complete required read and record data sheets, first article inspections or other documented inspections, as required.- Perform weld inspections using visual inspection procedures and measurement tools. Successfully pass inspection testing for qualification. - Verify previous operations have been completed; rectify before performing inspection.Working hours: 7:00 AM - 12:00 AMSkills:- Working knowledge of basic GD&T symbology, assimilation and measurement methods.- Needs to be OK with SMALL PARTS.- Comfortable using a Microscope, Calibers and Micrometers. - Familiar with computers and Microsoft Applications.- Able to interpret sample size from a standard AQL table.Education:High SchoolExperience:1-4 yearsQualifications:- High School Diploma or equivalent- 1-3 years mechanical inspection experience using a wide variety of equipment and tolerances to at least the 5th decimal point- CMI Certification or equivalent preferred- Comfortable working in a Clean Room Environment.- Ability to work under a microscope for long periods of time and use reticle to perform measurements. This is a temp to perm opportunity located in New Bedford, MA. We have 1st and 2nd shift available.Apply and submit your resume at www.spherion.com/apply (office code 75038)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Bedford, Massachusetts
      • Temp to Perm
      • $13.00 - $17.00 per hour
      • 7:00 AM - 3:30 PM
      Spherion is recruiting for multiple skilled Soldering Technicians in the New Bedford area!Responsibilities:-The day to day production and manufacturing of electric/battery components-Able to perform IPC CLass 3 soldering of SMT and through-hole components-Knowledge of computers to test product-Follow direction to assemble product to specifications and drawings-Use available tools to cut, clean, glue, and strip materials-Follow Quality Control proceduresWorking hours: 7:00 AM - 3:30 PMSkills:-Able to operate automated technologies in the manufacturing process-Computer Literacy-Able to stand and sit for long periods of time-Carry weight up to 50lbs on short periods of timeEducation:TradeExperience:1-4 yearsQualifications:-High School Diploma or equivalent-1-2 years of experience required-J-STD-001 Certification required.-Hand soldering preferred Make your next move your best move, get hired with Spherion!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is recruiting for multiple skilled Soldering Technicians in the New Bedford area!Responsibilities:-The day to day production and manufacturing of electric/battery components-Able to perform IPC CLass 3 soldering of SMT and through-hole components-Knowledge of computers to test product-Follow direction to assemble product to specifications and drawings-Use available tools to cut, clean, glue, and strip materials-Follow Quality Control proceduresWorking hours: 7:00 AM - 3:30 PMSkills:-Able to operate automated technologies in the manufacturing process-Computer Literacy-Able to stand and sit for long periods of time-Carry weight up to 50lbs on short periods of timeEducation:TradeExperience:1-4 yearsQualifications:-High School Diploma or equivalent-1-2 years of experience required-J-STD-001 Certification required.-Hand soldering preferred Make your next move your best move, get hired with Spherion!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Plympton, Massachusetts
      • Temp to Perm
      • $18.00 - $20.00 per hour
      • 7:00 AM - 12:00 AM
      Spherion Staffing is recruitng for Experienced Salvagnini Operators for a client in Plympton, MA!Responsibilities:- Experience with Salvagnini Fiber Lasers is mandatory- Set up and operate CNC Laser to cut light gauge sheet metal- Troubleshoot Salvagnini machine / small repairs and maintenance to Salvagnini machine- Ability to Set up and Operate CNC Lasers, including but not limited to Amada Lasers- Understands machine set up including program retrieval, proper gases, proper nozzles, lenses, etc.- Knowledge of laser lens cleaning, adjusting, focus, how to obtain clean cuts- Locate and move raw material with pallet jack or forklift- Understanding of start up and shut down for laser machines- Understanding of metal fabrication concepts and processes- Knowledge laser cutting machine routine maintenance- Checking accuracy of work using blueprints and precision measuring toolsWorking hours: 7:00 AM - 12:00 AMSkills:- Ability to read and interpret blueprints- Ability to Edit G Code is a plus- Comfortable working in fast paced environmentEducation:High SchoolExperience:1-4 yearsQualifications:- Proficiency and experience using Precision measurement tools, such as calipers, micrometers, and other gauges- Experience with Salvagnini machinery This is a temp to perm opportunity. Apply online today at www.spherion.com/apply. Office: 75038 or call in at 508-991-8170 and ask for Emily.We offer an excellent referral bonus program, as well as health insurance benefits for those who qualify.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is recruitng for Experienced Salvagnini Operators for a client in Plympton, MA!Responsibilities:- Experience with Salvagnini Fiber Lasers is mandatory- Set up and operate CNC Laser to cut light gauge sheet metal- Troubleshoot Salvagnini machine / small repairs and maintenance to Salvagnini machine- Ability to Set up and Operate CNC Lasers, including but not limited to Amada Lasers- Understands machine set up including program retrieval, proper gases, proper nozzles, lenses, etc.- Knowledge of laser lens cleaning, adjusting, focus, how to obtain clean cuts- Locate and move raw material with pallet jack or forklift- Understanding of start up and shut down for laser machines- Understanding of metal fabrication concepts and processes- Knowledge laser cutting machine routine maintenance- Checking accuracy of work using blueprints and precision measuring toolsWorking hours: 7:00 AM - 12:00 AMSkills:- Ability to read and interpret blueprints- Ability to Edit G Code is a plus- Comfortable working in fast paced environmentEducation:High SchoolExperience:1-4 yearsQualifications:- Proficiency and experience using Precision measurement tools, such as calipers, micrometers, and other gauges- Experience with Salvagnini machinery This is a temp to perm opportunity. Apply online today at www.spherion.com/apply. Office: 75038 or call in at 508-991-8170 and ask for Emily.We offer an excellent referral bonus program, as well as health insurance benefits for those who qualify.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Bedford, Massachusetts
      • Temp to Perm
      • $13.50 - $17.00 per hour
      • 6:00 AM - 6:00 AM
      Spherion is actively recruiting for multiple manufacturing positions in the New Bedford area! Openings on all shift and locations, pay to be determined per assignment.Responsibilities:Looking to staff for the following positions:- Assembly- Picking/Packing- Labelers- Material Handlers- Machine Operators- General Laborers- Press Operator- Shipping/Receiving- Inspectors- Quality ControlWorking hours: 6:00 AM - 6:00 AMSkills:- Ability to stand for long periods of time- Comfortable lifting up to 25 lbs unassisted- Operate machinery to continuously produce materials and finished goods- Work at a fast pace to keep up with production flow- Comfortable with hand tools, machinery, and loud noisesEducation:High SchoolExperience:1-4 yearsQualifications:- Previous manufacturing experience required- Some positions subject to a background check, drug test and COVID test prior to starting Apply online at www.spherion.com/apply (office code 75038) or submit your resume to Emily at emilyduquette@spherion.com!Openings on all shift and locations, pay to be determined per assignment.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is actively recruiting for multiple manufacturing positions in the New Bedford area! Openings on all shift and locations, pay to be determined per assignment.Responsibilities:Looking to staff for the following positions:- Assembly- Picking/Packing- Labelers- Material Handlers- Machine Operators- General Laborers- Press Operator- Shipping/Receiving- Inspectors- Quality ControlWorking hours: 6:00 AM - 6:00 AMSkills:- Ability to stand for long periods of time- Comfortable lifting up to 25 lbs unassisted- Operate machinery to continuously produce materials and finished goods- Work at a fast pace to keep up with production flow- Comfortable with hand tools, machinery, and loud noisesEducation:High SchoolExperience:1-4 yearsQualifications:- Previous manufacturing experience required- Some positions subject to a background check, drug test and COVID test prior to starting Apply online at www.spherion.com/apply (office code 75038) or submit your resume to Emily at emilyduquette@spherion.com!Openings on all shift and locations, pay to be determined per assignment.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Plymouth, Massachusetts
      • Temp to Perm
      • $18.00 - $26.00 per hour
      • 7:00 AM - 12:00 AM
      Recruiting skilled machinists for a client in Plymouth, MA!Responsibilities:Set up, operate, and break down machine station each shift ensuring all machinery is in good working order.Fine detailing of parts for accurate trim and removal of fine discrepancies.Working hours: 7:00 AM - 12:00 AMSkills:Operation of swiss, lathe, kiwa, and mikron machines.Previous CNC/machinist experience required.Medical manufacturing preferred.Education:TradeExperience:1-4 yearsQualifications:Ability to work an off shiftHourly pay to be determined by experience Qualified candidates can submit resumes directly to Emily at emilyduquette@spherion.com or apply online at www.spherion.com/applySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Recruiting skilled machinists for a client in Plymouth, MA!Responsibilities:Set up, operate, and break down machine station each shift ensuring all machinery is in good working order.Fine detailing of parts for accurate trim and removal of fine discrepancies.Working hours: 7:00 AM - 12:00 AMSkills:Operation of swiss, lathe, kiwa, and mikron machines.Previous CNC/machinist experience required.Medical manufacturing preferred.Education:TradeExperience:1-4 yearsQualifications:Ability to work an off shiftHourly pay to be determined by experience Qualified candidates can submit resumes directly to Emily at emilyduquette@spherion.com or apply online at www.spherion.com/applySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Plymouth, Massachusetts
      • Temp to Perm
      • $13.50 - $16.00 per hour
      • 7:00 AM - 3:30 PM
      Spherion is recruiting for a deburring for a popular medical device company in Plymouth, MA! Apply today to be considered.Responsibilities:Remove burrs and chips from medical devicesWash, clean and polish each deburred partWorking hours: 7:00 AM - 3:30 PMSkills:Experience with calipers, gauges, and micrometersAbility to use a microscopeAbility to work with small piecesDetail orientedEducation:High SchoolExperience:1-4 yearsQualifications:Training or Education in the technical field desirableMechanically inclined This is a temp to hire position in Plymouth, MA working Monday-Friday.Send your resume to emilyduquette@spherion.com or call 508-991-8170 to learn more!Apply online today at www.spherion.com/applySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is recruiting for a deburring for a popular medical device company in Plymouth, MA! Apply today to be considered.Responsibilities:Remove burrs and chips from medical devicesWash, clean and polish each deburred partWorking hours: 7:00 AM - 3:30 PMSkills:Experience with calipers, gauges, and micrometersAbility to use a microscopeAbility to work with small piecesDetail orientedEducation:High SchoolExperience:1-4 yearsQualifications:Training or Education in the technical field desirableMechanically inclined This is a temp to hire position in Plymouth, MA working Monday-Friday.Send your resume to emilyduquette@spherion.com or call 508-991-8170 to learn more!Apply online today at www.spherion.com/applySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mansfield, Massachusetts
      • Temp to Perm
      • $14.00 - $16.00 per hour
      Part Puller/Stocker positions are available at Jay Industries in Mansfield, Ohio. Join a great team with growth opportunities and benefits! These positions are full-time OR part-time!3rd Shift (10pm - 6am) Monday - Friday Starting Pay Rate = $14 - $16/hr
      Part Puller/Stocker positions are available at Jay Industries in Mansfield, Ohio. Join a great team with growth opportunities and benefits! These positions are full-time OR part-time!3rd Shift (10pm - 6am) Monday - Friday Starting Pay Rate = $14 - $16/hr

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.