Thank you for subscribing to your personalized job alerts.

    52 jobs found in blooming prairie, minnesota

    Filter2
    • Industry1
      Working in
      Show 52 jobs
      Clear filter
    • Location1
      Location & range
        Show 52 jobs
        Clear filter
      • Job types
        Job types
        Show 52 jobs
        Clear filter
      • Salary
        Salary
        $
        Show 52 jobs
        Clear filter
      Clear all
        • Owatonna, Minnesota
        • Permanent
        • $25.00 - $30.00 per hour
        • 6:00 PM - 6:00 AM
        To support basic plant operations through the installation, troubleshooting, maintenance and repair of all plant electrical systems and components.Responsibilities:Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees.ESSENTIAL FUNCTIONS:Maintain and trouble shoot all electrical devices within the plantAssist in new installation and upgrades of plant equipment.Provide primary service and operation of Pressco Camera and Ink Jet printer systems. Conduct process checks as required.Perform regular safety inspections to IBO and Washer ovens.Work with outside contractors to maintain the fire alarm system in proper working order.Maintain cleanliness of electrical shop and job sites, while practicing appropriate safety procedures.Assist and support other production floor operations as requiredRegular and timely attendance.Properly complete all administrative tasks, including log books, data entry and record keeping.Meet all other duties and responsibilities of a team member.Working hours: 6:00 PM - 6:00 AMSkills:Through experience and/or technical training, demonstrate basic electrical skills in the areas of:Circuit checks for voltage and taking amp readings.D.C. devices, including power supplies, sensors and solenoids.A.C. magnetic controls, including related switches, relays and solenoids.Single and variable speed motorsKnowledge of OSHA Electrical Standard, Lock out /Tag Out requirements and other safety procedures related to the job.Demonstrated knowledge of basic electronics for troubleshooting and calibration of components and the National Electrical CodeDemonstrated ability on how to use multi-meter, amprobe, oscilloscope and soldering station.Know how to use PLCs for troubleshooting purposes and programming of equipment.Education:TradeExperience:1-4 yearsQualifications:Able to effectively use DOS and Windows applications.Able to fashion and run electrical conduit using pipe benders and threaders.Able to communicate well with production crews and work together as a team member. Apply todaySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        To support basic plant operations through the installation, troubleshooting, maintenance and repair of all plant electrical systems and components.Responsibilities:Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees.ESSENTIAL FUNCTIONS:Maintain and trouble shoot all electrical devices within the plantAssist in new installation and upgrades of plant equipment.Provide primary service and operation of Pressco Camera and Ink Jet printer systems. Conduct process checks as required.Perform regular safety inspections to IBO and Washer ovens.Work with outside contractors to maintain the fire alarm system in proper working order.Maintain cleanliness of electrical shop and job sites, while practicing appropriate safety procedures.Assist and support other production floor operations as requiredRegular and timely attendance.Properly complete all administrative tasks, including log books, data entry and record keeping.Meet all other duties and responsibilities of a team member.Working hours: 6:00 PM - 6:00 AMSkills:Through experience and/or technical training, demonstrate basic electrical skills in the areas of:Circuit checks for voltage and taking amp readings.D.C. devices, including power supplies, sensors and solenoids.A.C. magnetic controls, including related switches, relays and solenoids.Single and variable speed motorsKnowledge of OSHA Electrical Standard, Lock out /Tag Out requirements and other safety procedures related to the job.Demonstrated knowledge of basic electronics for troubleshooting and calibration of components and the National Electrical CodeDemonstrated ability on how to use multi-meter, amprobe, oscilloscope and soldering station.Know how to use PLCs for troubleshooting purposes and programming of equipment.Education:TradeExperience:1-4 yearsQualifications:Able to effectively use DOS and Windows applications.Able to fashion and run electrical conduit using pipe benders and threaders.Able to communicate well with production crews and work together as a team member. Apply todaySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $15.00 per hour
        • 7:00 AM - 3:30 PM
        Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 7:00 AM - 3:30 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Abile to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 7:00 AM - 3:30 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Abile to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $18.00 - $23.00 per hour
        • 6:00 AM - 2:15 PM
        Focus on assembling and building machinery through performing a variety of functions in the assembly and fabrication area including but not limited to welding, sawing, drilling, tapping, reaming, and machining. Will use calibrated equipment and machinery, engineering, and simple drawings, as well as written and verbal instructions to perform basic tasks. Will also perform sub assembly and final assembly processes on a variety of mechanical assemblies. Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blueprints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change. Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions. Fabricate components from blueprints and verbal instructions. Perform assignments in accordance with written quality procedures. Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects. Ensure compliance to safety rules and procedures.Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to product?s shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 6:00 AM - 2:15 PMSkills:-Mechanically inclined.-Effectively and safely operate a variety of assigned tools and equipment.-Ability to work independently and in a team setting.-May require heavy lifting.-Proficient with precision measuring instruments. (tape measure, calipers)-Problem solving skills.Education:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent.Passing pre-employment drug screen. Work for a company voted Best Place to Work many times, and 100% Employee Owed! BENEFITS! BENEFITS! BENEFITS! Medical & S
        Focus on assembling and building machinery through performing a variety of functions in the assembly and fabrication area including but not limited to welding, sawing, drilling, tapping, reaming, and machining. Will use calibrated equipment and machinery, engineering, and simple drawings, as well as written and verbal instructions to perform basic tasks. Will also perform sub assembly and final assembly processes on a variety of mechanical assemblies. Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blueprints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change. Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions. Fabricate components from blueprints and verbal instructions. Perform assignments in accordance with written quality procedures. Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects. Ensure compliance to safety rules and procedures.Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to product?s shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 6:00 AM - 2:15 PMSkills:-Mechanically inclined.-Effectively and safely operate a variety of assigned tools and equipment.-Ability to work independently and in a team setting.-May require heavy lifting.-Proficient with precision measuring instruments. (tape measure, calipers)-Problem solving skills.Education:High SchoolExperience:1-4 yearsQualifications:HS Diploma or equivalent.Passing pre-employment drug screen. Work for a company voted Best Place to Work many times, and 100% Employee Owed! BENEFITS! BENEFITS! BENEFITS! Medical & S
        • Albert Lea, Minnesota
        • Permanent
        • $19.00 per hour
        • 2:00 PM - 10:15 PM
        Sets up and operates a variety of presses to perform repetitive work. Performs manual operation only, using pre-sheared strip and blank size stock for a variety of materials. Adjusts mechanical knockout devices and ram stroke. Performs minor repair of dies and determines when maintenance is required. Obtains first piece approval from inspection. Arranges work places, furnishes materials and manufacturing information, and demonstrates operation of equipment to lower level operators. Monitors operation of equipment during production run and makes any necessary adjustments.Responsibilities:?Performs sheet metal operations to fabricate a limited variety of units or products of more standard design.?May do simple layout work.?Able to operate all types of sheet metal machines to cut bend or form parts and uses sheet metal hand tools.?Plans, lays out and performs all types of sheet metal operations to fabricate wide variety of units or products of complex design involving close tolerances.?Must set up and operate all types of sheet metal machines to cut, bend or form parts.?Uses a variety of sheet metal hand tools and measuring instruments.?Uses shop mathematics.Working hours: 2:00 PM - 10:15 PMSkills:--High mechanical aptitude--Knowledge of CNC machines--Organizational skills--Proficient with precision measuring instruments--Must be able to read blueprints--Requires some heavy liftingEducation:High SchoolExperience:0-1 yearsQualifications:?Requires passing a pre-employment screening, which includes a drug screen.High school diploma or equivalent. Able to perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversions *DIRECT HIRE* with a 100% Employee Owned Company! Benefits include Well@Work Clinic, HRA, Medical Plan, Disability & Life Plans, Retirement Plans and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Sets up and operates a variety of presses to perform repetitive work. Performs manual operation only, using pre-sheared strip and blank size stock for a variety of materials. Adjusts mechanical knockout devices and ram stroke. Performs minor repair of dies and determines when maintenance is required. Obtains first piece approval from inspection. Arranges work places, furnishes materials and manufacturing information, and demonstrates operation of equipment to lower level operators. Monitors operation of equipment during production run and makes any necessary adjustments.Responsibilities:?Performs sheet metal operations to fabricate a limited variety of units or products of more standard design.?May do simple layout work.?Able to operate all types of sheet metal machines to cut bend or form parts and uses sheet metal hand tools.?Plans, lays out and performs all types of sheet metal operations to fabricate wide variety of units or products of complex design involving close tolerances.?Must set up and operate all types of sheet metal machines to cut, bend or form parts.?Uses a variety of sheet metal hand tools and measuring instruments.?Uses shop mathematics.Working hours: 2:00 PM - 10:15 PMSkills:--High mechanical aptitude--Knowledge of CNC machines--Organizational skills--Proficient with precision measuring instruments--Must be able to read blueprints--Requires some heavy liftingEducation:High SchoolExperience:0-1 yearsQualifications:?Requires passing a pre-employment screening, which includes a drug screen.High school diploma or equivalent. Able to perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversions *DIRECT HIRE* with a 100% Employee Owned Company! Benefits include Well@Work Clinic, HRA, Medical Plan, Disability & Life Plans, Retirement Plans and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $16.00 - $20.00 per hour
        • 6:00 AM - 2:15 PM
        Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.CLASSIFICATIONS:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:-The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.-The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.-Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.-Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division-Knowledge of decimals, fractions, and metric/English conversions-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders-Lift and position parts into fixturesEducation:High SchoolExperience:1-4 yearsQualifications:HS DiplomaPassing Drug Screen DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! Medical & ST DisabilityHRA 100% Employer Contribution, helps pay medical deductibleFree Clinic For employees and dependentsLT Disability & Life Insurance 100% Employer PaidPTO - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per yearWellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment401K and ESOP Stock ownership retirement funds are invested for you Profit Sharing Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment. Employment is contingent upon the results of a pre-employment drug examination.CLASSIFICATIONS:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork (i.e. Production Job Records, Non-conformances, Time cards, and Product Identification Tags, In-process Inspection Records and Facility maintenance Records).More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:-The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.-The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.-Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.-Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division-Knowledge of decimals, fractions, and metric/English conversions-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders-Lift and position parts into fixturesEducation:High SchoolExperience:1-4 yearsQualifications:HS DiplomaPassing Drug Screen DIRECT HIRE POSITIONS! Work for a company that is 100% Employee owned and repeatedly voted Best Place to Work! Amazing BENEFITS, BENEFITS, BENEFITS! Medical & ST DisabilityHRA 100% Employer Contribution, helps pay medical deductibleFree Clinic For employees and dependentsLT Disability & Life Insurance 100% Employer PaidPTO - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per yearWellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment401K and ESOP Stock ownership retirement funds are invested for you Profit Sharing Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $14.25 per hour
        • 7:00 AM - 3:15 PM
        Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 7:00 AM - 3:15 PMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Experience is a factory setting-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRegularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.Requires passing pre-employment screening, including a drug screen Direct Hire with a 100% owned company voted "Best Place to Work" many years! Impressive BENEFITS, BENEFITS, BENEFITS Package! Medical & Short-Term Disability- Low premium ratesHRA 100% Employer Contribution, helps pay medical deductibleFree Clinic For employees and dependentsLT Disability & Life Insurance 100% Employer PaidPTO - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per yearWellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP Stock ownership retirement fundsProfit Sharing Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 7:00 AM - 3:15 PMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Experience is a factory setting-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRegularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.Requires passing pre-employment screening, including a drug screen Direct Hire with a 100% owned company voted "Best Place to Work" many years! Impressive BENEFITS, BENEFITS, BENEFITS Package! Medical & Short-Term Disability- Low premium ratesHRA 100% Employer Contribution, helps pay medical deductibleFree Clinic For employees and dependentsLT Disability & Life Insurance 100% Employer PaidPTO - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per yearWellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP Stock ownership retirement fundsProfit Sharing Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $16.00 - $18.00 per hour
        • 2:00 PM - 10:15 PM
        Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 2:00 PM - 10:15 PMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Education:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent. Two-year technical degree/certification in machining OR one year of machining experience. Passing a pre-employment drug screen Direct Hire with a 100% owned company voted "Best Place to Work" many years! Impressive Benefits Package! Medical & Short-Term Disability- Low premium ratesHRA 100% Employer Contribution, helps pay medical deductibleFree Clinic For employees and dependentsLT Disability & Life Insurance ? 100% Employer PaidPTO - Vacation and Sick TimeTuition Reimbursement ? Up to $4,000 per yearWellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays ? Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement fundsProfit Sharing Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 2:00 PM - 10:15 PMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Education:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent. Two-year technical degree/certification in machining OR one year of machining experience. Passing a pre-employment drug screen Direct Hire with a 100% owned company voted "Best Place to Work" many years! Impressive Benefits Package! Medical & Short-Term Disability- Low premium ratesHRA 100% Employer Contribution, helps pay medical deductibleFree Clinic For employees and dependentsLT Disability & Life Insurance ? 100% Employer PaidPTO - Vacation and Sick TimeTuition Reimbursement ? Up to $4,000 per yearWellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays ? Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement fundsProfit Sharing Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Temp to Perm
        • $17.25 per hour
        • 2:00 PM - 10:30 PM
        Job Summary: Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:???Basic mechanical aptitude by using machine specific tools.???Ability to work safely when learning the equipment and surroundings???Properly lock out and tag out equipment.???Good Manufacturing Practices (GMPs) and how to keep the product safe???Assist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.???Learn how to tear down equipment for cleaning???Learning how to assemble the equipment???Setting flow rates and starting equipment???Keeping up with equipment and product when running.Working hours: 2:00 PM - 10:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the ???Best Place to Work??? many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $17 (1ST Shift) $18.25 (2nd Shift) & $18.50 (3rd Shift), plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Job Summary: Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:???Basic mechanical aptitude by using machine specific tools.???Ability to work safely when learning the equipment and surroundings???Properly lock out and tag out equipment.???Good Manufacturing Practices (GMPs) and how to keep the product safe???Assist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.???Learn how to tear down equipment for cleaning???Learning how to assemble the equipment???Setting flow rates and starting equipment???Keeping up with equipment and product when running.Working hours: 2:00 PM - 10:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the ???Best Place to Work??? many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $17 (1ST Shift) $18.25 (2nd Shift) & $18.50 (3rd Shift), plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Temp to Perm
        • $17.50 per hour
        • 6:00 PM - 5:30 AM
        Tends machine that performs packaging operation.Responsibilities:???Assemble the dryer.???Starts machine and observe to detect malfunctions.???Stops machine and reports malfunction to supervisor.???Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.???Collect all appropriate samples as needed.???Packages product appropriately when needed.???Insures that all packaging is labeled and recorded correctly.???Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 5:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Voted "Best Place to Work" Many years! TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $17/hr (Days) & $18.50/hr (Nights), plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Tends machine that performs packaging operation.Responsibilities:???Assemble the dryer.???Starts machine and observe to detect malfunctions.???Stops machine and reports malfunction to supervisor.???Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.???Collect all appropriate samples as needed.???Packages product appropriately when needed.???Insures that all packaging is labeled and recorded correctly.???Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 5:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Voted "Best Place to Work" Many years! TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $17/hr (Days) & $18.50/hr (Nights), plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Temp to Perm
        • $15.90 per hour
        • 3:30 PM - 12:00 AM
        With limited supervision, the Warehouse Worker is responsible for operating a fork lift with the purpose of accurate storing, shipping, and receiving of product accurately in a (unionized/non-unionized) public freezer warehouse. Warehouse workers are to meet company standards of safety, security, quality, and productivity continuously. Work is generally performed in a refrigerated to sub-zero environment.Materials Used: Product, material handling forms Tools Used: Fork-lifts (sit-down, stand-ups, shuttle trucks)Responsibilities:SHIPPING/RECEIVING: Unload and load freight in an efficient, accurate and safe manner. Identify, by lot number or other necessary means of identification, on each pallet of product.STORING: Move product to storage areas with proper equipment and efficiently stage the merchandise for storage in the appropriate area. Place palletized product in storage racks in freezer and record or communicate location to the Shipping Receiving Clerk in the office.ORDER PICKING: Pick orders for shipment and assemble various types of merchandise to be shipped. Accurately mark product with appropriate identification and codes as required per customer requirements. Pull and prepare product for shipment, ensuring that the exact number and type of product is loaded and shipped. Make certain product comes from the proper locations and the lot numbers agree according to the picking documents. Perform picking duties in an efficient and safe manner.QUALITY: Ensure inbound and outbound shipments are accurate and free of damage.EQUIPMENT: Operate any materials handling equipment safely and efficiently as required. Use radio frequency equipment for picking, receiving and storing functions, as required. Change fork lift batteries as needed.SAFETY, SANITATION, SECURITY: Maintain an orderly, clean, and neat work area. Operate material handling equipment in a safe manner. Assist in maintaining the security of the warehouse. Comply with OSHA and MSDS standards.OTHER DUTIES: Charge fork lift batteries as needed; participate in physical inventories; perform labeling, sorting, wrapping, packing, and repacking as needed; repair pallets when necessary; clean railcars, trailers, truck bays, and warehouse as requested; cut grass, rake leaves, and remove snow as seasonally required. Perform other, related duties as necessary.Working hours: 3:30 PM - 12:00 AMSkills:The Warehouse Worker must be able to read a work order, add, subtract, multiply, divide in all units of measure and the ability to read and compute rate, ratio, and percentages., count accurately, do simple math, and write legibly. The ability to operate a fork-lift and its attachments is an important skill. Following policies and procedure is vital to the success of each employee. Familiarity with materials handling and radio frequency equipment is beneficial.Education:No Degree RequiredExperience:0-1 yearsQualifications:Minimum of a high school diploma required. High School Education or equivalentValid driver???s license.Forklift Experience. Must be capable of sitting, standing, and walking for extended periods of time IN A COLD ENVIRONMENT. Working Conditions: Clean working environment and the building is well lit. Some moderate to heavy lifting (weights can exceed 60 pounds), and can require overhead work. Some pushing, pulling, bending, & stooping. The building temperatures are below freezing. The job functions require prolonged standing. Accurate depth perception is needed while placing pallets in the freezer racking. Work for a class act company over 100 years old, and family owned for generations! Temp-to-Hire position converted to their Payroll within 30days. Increases at 3mths, 6mths and 9 mths.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        With limited supervision, the Warehouse Worker is responsible for operating a fork lift with the purpose of accurate storing, shipping, and receiving of product accurately in a (unionized/non-unionized) public freezer warehouse. Warehouse workers are to meet company standards of safety, security, quality, and productivity continuously. Work is generally performed in a refrigerated to sub-zero environment.Materials Used: Product, material handling forms Tools Used: Fork-lifts (sit-down, stand-ups, shuttle trucks)Responsibilities:SHIPPING/RECEIVING: Unload and load freight in an efficient, accurate and safe manner. Identify, by lot number or other necessary means of identification, on each pallet of product.STORING: Move product to storage areas with proper equipment and efficiently stage the merchandise for storage in the appropriate area. Place palletized product in storage racks in freezer and record or communicate location to the Shipping Receiving Clerk in the office.ORDER PICKING: Pick orders for shipment and assemble various types of merchandise to be shipped. Accurately mark product with appropriate identification and codes as required per customer requirements. Pull and prepare product for shipment, ensuring that the exact number and type of product is loaded and shipped. Make certain product comes from the proper locations and the lot numbers agree according to the picking documents. Perform picking duties in an efficient and safe manner.QUALITY: Ensure inbound and outbound shipments are accurate and free of damage.EQUIPMENT: Operate any materials handling equipment safely and efficiently as required. Use radio frequency equipment for picking, receiving and storing functions, as required. Change fork lift batteries as needed.SAFETY, SANITATION, SECURITY: Maintain an orderly, clean, and neat work area. Operate material handling equipment in a safe manner. Assist in maintaining the security of the warehouse. Comply with OSHA and MSDS standards.OTHER DUTIES: Charge fork lift batteries as needed; participate in physical inventories; perform labeling, sorting, wrapping, packing, and repacking as needed; repair pallets when necessary; clean railcars, trailers, truck bays, and warehouse as requested; cut grass, rake leaves, and remove snow as seasonally required. Perform other, related duties as necessary.Working hours: 3:30 PM - 12:00 AMSkills:The Warehouse Worker must be able to read a work order, add, subtract, multiply, divide in all units of measure and the ability to read and compute rate, ratio, and percentages., count accurately, do simple math, and write legibly. The ability to operate a fork-lift and its attachments is an important skill. Following policies and procedure is vital to the success of each employee. Familiarity with materials handling and radio frequency equipment is beneficial.Education:No Degree RequiredExperience:0-1 yearsQualifications:Minimum of a high school diploma required. High School Education or equivalentValid driver???s license.Forklift Experience. Must be capable of sitting, standing, and walking for extended periods of time IN A COLD ENVIRONMENT. Working Conditions: Clean working environment and the building is well lit. Some moderate to heavy lifting (weights can exceed 60 pounds), and can require overhead work. Some pushing, pulling, bending, & stooping. The building temperatures are below freezing. The job functions require prolonged standing. Accurate depth perception is needed while placing pallets in the freezer racking. Work for a class act company over 100 years old, and family owned for generations! Temp-to-Hire position converted to their Payroll within 30days. Increases at 3mths, 6mths and 9 mths.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Temp to Perm
        • $15.50 per hour
        • 8:00 AM - 4:30 PM
        With limited supervision, the Warehouse Worker is responsible for operating a fork lift with the purpose of accurate storing, shipping, and receiving of product accurately in a (unionized/non-unionized) public freezer warehouse. Warehouse workers are to meet company standards of safety, security, quality, and productivity continuously. Work is generally performed in a refrigerated to sub-zero environment.Materials Used: Product, material handling forms Tools Used: Fork-lifts (sit-down, stand-ups, shuttle trucks)Responsibilities:SHIPPING/RECEIVING: Unload and load freight in an efficient, accurate and safe manner. Identify, by lot number or other necessary means of identification, on each pallet of product.STORING: Move product to storage areas with proper equipment and efficiently stage the merchandise for storage in the appropriate area. Place palletized product in storage racks in freezer and record or communicate location to the Shipping Receiving Clerk in the office.ORDER PICKING: Pick orders for shipment and assemble various types of merchandise to be shipped. Accurately mark product with appropriate identification and codes as required per customer requirements. Pull and prepare product for shipment, ensuring that the exact number and type of product is loaded and shipped. Make certain product comes from the proper locations and the lot numbers agree according to the picking documents. Perform picking duties in an efficient and safe manner.QUALITY: Ensure inbound and outbound shipments are accurate and free of damage.EQUIPMENT: Operate any materials handling equipment safely and efficiently as required. Use radio frequency equipment for picking, receiving and storing functions, as required. Change fork lift batteries as needed.SAFETY, SANITATION, SECURITY: Maintain an orderly, clean, and neat work area. Operate material handling equipment in a safe manner. Assist in maintaining the security of the warehouse. Comply with OSHA and MSDS standards.OTHER DUTIES: Charge fork lift batteries as needed; participate in physical inventories; perform labeling, sorting, wrapping, packing, and repacking as needed; repair pallets when necessary; clean railcars, trailers, truck bays, and warehouse as requested; cut grass, rake leaves, and remove snow as seasonally required. Perform other, related duties as necessary.Working hours: 8:00 AM - 4:30 PMSkills:The Warehouse Worker must be able to read a work order, add, subtract, multiply, divide in all units of measure and the ability to read and compute rate, ratio, and percentages., count accurately, do simple math, and write legibly. The ability to operate a fork-lift and its attachments is an important skill. Following policies and procedure is vital to the success of each employee. Familiarity with materials handling and radio frequency equipment is beneficial.Education:No Degree RequiredExperience:1-4 yearsQualifications:Minimum of a high school diploma required. High School Education or equivalentValid driver?s license.Forklift Experience. Must be capable of sitting, standing, and walking for extended periods of time IN A COLD ENVIRONMENT. Working Conditions: Clean working environment and the building is well lit. Some moderate to heavy lifting (weights can exceed 60 pounds), and can require overhead work. Some pushing, pulling, bending, & stooping. The building temperatures are below freezing. The job functions require prolonged standing. Accurate depth perception is needed while placing pallets in the freezer racking. Work for a class act company over 100 years old, and family owned for generations! Temp-to-Hire position converted to their Payroll within 30days. Increases at 3mths, 6mths and 9 mths.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        With limited supervision, the Warehouse Worker is responsible for operating a fork lift with the purpose of accurate storing, shipping, and receiving of product accurately in a (unionized/non-unionized) public freezer warehouse. Warehouse workers are to meet company standards of safety, security, quality, and productivity continuously. Work is generally performed in a refrigerated to sub-zero environment.Materials Used: Product, material handling forms Tools Used: Fork-lifts (sit-down, stand-ups, shuttle trucks)Responsibilities:SHIPPING/RECEIVING: Unload and load freight in an efficient, accurate and safe manner. Identify, by lot number or other necessary means of identification, on each pallet of product.STORING: Move product to storage areas with proper equipment and efficiently stage the merchandise for storage in the appropriate area. Place palletized product in storage racks in freezer and record or communicate location to the Shipping Receiving Clerk in the office.ORDER PICKING: Pick orders for shipment and assemble various types of merchandise to be shipped. Accurately mark product with appropriate identification and codes as required per customer requirements. Pull and prepare product for shipment, ensuring that the exact number and type of product is loaded and shipped. Make certain product comes from the proper locations and the lot numbers agree according to the picking documents. Perform picking duties in an efficient and safe manner.QUALITY: Ensure inbound and outbound shipments are accurate and free of damage.EQUIPMENT: Operate any materials handling equipment safely and efficiently as required. Use radio frequency equipment for picking, receiving and storing functions, as required. Change fork lift batteries as needed.SAFETY, SANITATION, SECURITY: Maintain an orderly, clean, and neat work area. Operate material handling equipment in a safe manner. Assist in maintaining the security of the warehouse. Comply with OSHA and MSDS standards.OTHER DUTIES: Charge fork lift batteries as needed; participate in physical inventories; perform labeling, sorting, wrapping, packing, and repacking as needed; repair pallets when necessary; clean railcars, trailers, truck bays, and warehouse as requested; cut grass, rake leaves, and remove snow as seasonally required. Perform other, related duties as necessary.Working hours: 8:00 AM - 4:30 PMSkills:The Warehouse Worker must be able to read a work order, add, subtract, multiply, divide in all units of measure and the ability to read and compute rate, ratio, and percentages., count accurately, do simple math, and write legibly. The ability to operate a fork-lift and its attachments is an important skill. Following policies and procedure is vital to the success of each employee. Familiarity with materials handling and radio frequency equipment is beneficial.Education:No Degree RequiredExperience:1-4 yearsQualifications:Minimum of a high school diploma required. High School Education or equivalentValid driver?s license.Forklift Experience. Must be capable of sitting, standing, and walking for extended periods of time IN A COLD ENVIRONMENT. Working Conditions: Clean working environment and the building is well lit. Some moderate to heavy lifting (weights can exceed 60 pounds), and can require overhead work. Some pushing, pulling, bending, & stooping. The building temperatures are below freezing. The job functions require prolonged standing. Accurate depth perception is needed while placing pallets in the freezer racking. Work for a class act company over 100 years old, and family owned for generations! Temp-to-Hire position converted to their Payroll within 30days. Increases at 3mths, 6mths and 9 mths.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $18.00 - $19.00 per hour
        • 6:00 AM - 2:15 PM
        Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Apply acquired trade skills such as electrical, mechanical, and plumbing to complete assembly process.Install and troubleshoot industrial control panels. Read and build from electrical schematics. Install various types of wiring and cable tray systems. Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Perform checks for quality of parts and adjust as required.Perform other duties as assigned.Working hours: 6:00 AM - 2:15 PMSkills:-Familiar with mechanical and electromechanical components-Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes-Manual dexterity-Ability to work in a team setting-A positive can-do attitude-Motivation and communication skills-Problem solving skills-Refuse to be satisfied with average performance-Familiar with and able to read electrical schematics and symbolsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalent2-year Electrical Degree or 2 - 5 years of related experiencePassing a pre-employment screening. Which includes a drug screen DIRECT HIRE with a 100% Employee Owned Company! Great Benefits Package! Medical & Short-Term Disability, HRA-100% Employer Contribution, Free Clinic for employees and dependents, LT Disability & Life Insurance-100% Employer Paid, PTO, Tuition Reimbursement, Wellness Programs, Employee Assistance Programs, We Care Program, Paid Holidays-1st day of employment, 401K and ESOP, Profit Sharing, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Apply acquired trade skills such as electrical, mechanical, and plumbing to complete assembly process.Install and troubleshoot industrial control panels. Read and build from electrical schematics. Install various types of wiring and cable tray systems. Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Perform checks for quality of parts and adjust as required.Perform other duties as assigned.Working hours: 6:00 AM - 2:15 PMSkills:-Familiar with mechanical and electromechanical components-Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes-Manual dexterity-Ability to work in a team setting-A positive can-do attitude-Motivation and communication skills-Problem solving skills-Refuse to be satisfied with average performance-Familiar with and able to read electrical schematics and symbolsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalent2-year Electrical Degree or 2 - 5 years of related experiencePassing a pre-employment screening. Which includes a drug screen DIRECT HIRE with a 100% Employee Owned Company! Great Benefits Package! Medical & Short-Term Disability, HRA-100% Employer Contribution, Free Clinic for employees and dependents, LT Disability & Life Insurance-100% Employer Paid, PTO, Tuition Reimbursement, Wellness Programs, Employee Assistance Programs, We Care Program, Paid Holidays-1st day of employment, 401K and ESOP, Profit Sharing, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Temporary
        • $17.80 per hour
        • 10:00 PM - 6:30 AM
        General production workers will be responsible to learn and perform various positions. Employees will rotate to different positions as needed, outlined below.Responsibilities:The following responsibilities are rotated. Clean and de-seed vegetables including peppers, cucumbers, tomatoes, oranges, and onions. Inspect potatoes and fill potato trays/racks. Apply lids on salad containers. Make and load boxes. Label boxes and Salad containers. Palletize boxes. Take sleeved bags of mashed potatoes from conveyor belt and load into boxes. Palletize boxes. Place cabbage on prongs to be cored, and cut remaining core and remove outer leaves.Working hours: 10:00 PM - 6:30 AMSkills:Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must be willing to learn various jobs and duties, because they will be required to rotate to different areas.Education:High SchoolExperience:0-1 yearsQualifications:Must be willing to learn and follow all Food Safety procedures and wear personal protective equipment. Must be able to regularly stand, walk push or pull, talk or hear and use hands to finger, handle, or feel; reach with hands and arms. The employee is occasionally required to sit, climb or balance; stoop, kneel, crouch, or crawl; and push or pull. Able to lift 25-30lbs frequently. Must be able to work in 30-50 degree temperature, with moderate noise level. High school diploma or GED. No prior experience or training is necessary. Want to work for one of Albert Leas top employers?! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        General production workers will be responsible to learn and perform various positions. Employees will rotate to different positions as needed, outlined below.Responsibilities:The following responsibilities are rotated. Clean and de-seed vegetables including peppers, cucumbers, tomatoes, oranges, and onions. Inspect potatoes and fill potato trays/racks. Apply lids on salad containers. Make and load boxes. Label boxes and Salad containers. Palletize boxes. Take sleeved bags of mashed potatoes from conveyor belt and load into boxes. Palletize boxes. Place cabbage on prongs to be cored, and cut remaining core and remove outer leaves.Working hours: 10:00 PM - 6:30 AMSkills:Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must be willing to learn various jobs and duties, because they will be required to rotate to different areas.Education:High SchoolExperience:0-1 yearsQualifications:Must be willing to learn and follow all Food Safety procedures and wear personal protective equipment. Must be able to regularly stand, walk push or pull, talk or hear and use hands to finger, handle, or feel; reach with hands and arms. The employee is occasionally required to sit, climb or balance; stoop, kneel, crouch, or crawl; and push or pull. Able to lift 25-30lbs frequently. Must be able to work in 30-50 degree temperature, with moderate noise level. High school diploma or GED. No prior experience or training is necessary. Want to work for one of Albert Leas top employers?! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $18.00 - $20.00 per hour
        • 7:30 AM - 3:30 PM
        The Documentation Specialist will work closely with Manufacturing Engineering and production to develop and maintain standard documentation.Responsibilities:Routinely will create visual aids for associates to better understand work procedures.Documents will be periodically checked with production for accuracy.Develop electronic storage system that houses all assembly procedures in controlled method.Working hours: 7:30 AM - 3:30 PMSkills:Capable of creating visual aids through photographs and Office productsPrevious production experience (preferred but not required)Education:High SchoolExperience:1-4 yearsQualifications:Must be proficient in Microsoft Office Products (Excel, Word, PowerPoint,)Proficient in Microsoft Visio (preferred but not required) Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The Documentation Specialist will work closely with Manufacturing Engineering and production to develop and maintain standard documentation.Responsibilities:Routinely will create visual aids for associates to better understand work procedures.Documents will be periodically checked with production for accuracy.Develop electronic storage system that houses all assembly procedures in controlled method.Working hours: 7:30 AM - 3:30 PMSkills:Capable of creating visual aids through photographs and Office productsPrevious production experience (preferred but not required)Education:High SchoolExperience:1-4 yearsQualifications:Must be proficient in Microsoft Office Products (Excel, Word, PowerPoint,)Proficient in Microsoft Visio (preferred but not required) Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $15.00 - $22.00 per hour
        • 7:00 AM - 3:00 PM
        $1,500 SPOT & STAY BONUSES; $500.00 ON VERY FIRST PAYCHECK!Responsibilities:APPLY TODAY and be DIRECTLY HIRED for any of the following positions on 1st, 2nd, 3rd shifts available. Assembly & Coating Line Operators (Parts Hangers) $15.00 / HRForklift drivers $18.00 / HRPunch Press & Die Cast Machine Operators $20.00 / HR Maintenance Mechanics $22.00 / HRTool & Die $26 / HRSHIFT DIFFERENTIALS 2nd & 3rd SHIFT $1.00 / HRWorking hours: 7:00 AM - 3:00 PMSkills:BENEFITS: PAID TIME OFF, HEALTH BENEFITS, EDUCATION & FITNESS REIMBURSEMENT, SAFETY GLASSES & SHOE REIMBURSEMENT.Education:No Degree RequiredExperience:0-1 yearsQualifications:Physical Effort Required - Continuous standing, visual attention and eye-hand coordination is necessary. Must have good dexterity and work quickly to keep up with coating line. Requires frequent bending, stooping, reaching, pushing, pulling and lifting. Frequent moderate to heavy lifting (40 pounds) and movement of containers. Effort is expended in pushing and pullingcontainers in work areas. Apply or refer a friend and be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        $1,500 SPOT & STAY BONUSES; $500.00 ON VERY FIRST PAYCHECK!Responsibilities:APPLY TODAY and be DIRECTLY HIRED for any of the following positions on 1st, 2nd, 3rd shifts available. Assembly & Coating Line Operators (Parts Hangers) $15.00 / HRForklift drivers $18.00 / HRPunch Press & Die Cast Machine Operators $20.00 / HR Maintenance Mechanics $22.00 / HRTool & Die $26 / HRSHIFT DIFFERENTIALS 2nd & 3rd SHIFT $1.00 / HRWorking hours: 7:00 AM - 3:00 PMSkills:BENEFITS: PAID TIME OFF, HEALTH BENEFITS, EDUCATION & FITNESS REIMBURSEMENT, SAFETY GLASSES & SHOE REIMBURSEMENT.Education:No Degree RequiredExperience:0-1 yearsQualifications:Physical Effort Required - Continuous standing, visual attention and eye-hand coordination is necessary. Must have good dexterity and work quickly to keep up with coating line. Requires frequent bending, stooping, reaching, pushing, pulling and lifting. Frequent moderate to heavy lifting (40 pounds) and movement of containers. Effort is expended in pushing and pullingcontainers in work areas. Apply or refer a friend and be eligible for an additional $1,000 bonus!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Austin, Minnesota
        • Permanent
        • $16.50 - $18.00 per hour
        • 6:00 AM - 4:00 PM
        Laborers assist welders in all aspects of fabrication and assembly in shop and field site work areas. And assist painters and bead blasters in prepping/coating projects.Responsibilities:Operate all hand/automated tools including tape measure, steel square, wrenches, ratchets, grinders, chop saws, come-a-longs, jacks, chain hoists, clamps, welding dogs & pad-eyes, etc.Lay out, position, and secure parts and assemblies using hoists, pry bars, wrenches, hammer, and wedges as directed.Remove rough spots, slag, etc. from work piece, using portable grinder, wire brush, hand file, bench grinder, wire wheel, etc.Lift, move, transport steel parts using hydraulic lifts, plate clamps, chain hoists, dollies and hand carts.Observe and follows all company safety rules and regulations.Clean and maintain an orderly work area.Work well with others to ensure quality of work while maintaining scheduling demands.Performs other miscellaneous tasks as directed by management.Working hours: 6:00 AM - 4:00 PMSkills:Ability to communicate both verbally as well as through written communication.Reliable and punctual.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to lift 50 pounds.Must possess adequate sight, hearing and use of limbs for all aspects of job.Able to work for periods of time while kneeling, crouching, crawling, climbing steps as well as the ability to work from a ladder.Ability to pass a drug and alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant Company 30%, empl 70%. To offset the deductible?company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Laborers assist welders in all aspects of fabrication and assembly in shop and field site work areas. And assist painters and bead blasters in prepping/coating projects.Responsibilities:Operate all hand/automated tools including tape measure, steel square, wrenches, ratchets, grinders, chop saws, come-a-longs, jacks, chain hoists, clamps, welding dogs & pad-eyes, etc.Lay out, position, and secure parts and assemblies using hoists, pry bars, wrenches, hammer, and wedges as directed.Remove rough spots, slag, etc. from work piece, using portable grinder, wire brush, hand file, bench grinder, wire wheel, etc.Lift, move, transport steel parts using hydraulic lifts, plate clamps, chain hoists, dollies and hand carts.Observe and follows all company safety rules and regulations.Clean and maintain an orderly work area.Work well with others to ensure quality of work while maintaining scheduling demands.Performs other miscellaneous tasks as directed by management.Working hours: 6:00 AM - 4:00 PMSkills:Ability to communicate both verbally as well as through written communication.Reliable and punctual.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to lift 50 pounds.Must possess adequate sight, hearing and use of limbs for all aspects of job.Able to work for periods of time while kneeling, crouching, crawling, climbing steps as well as the ability to work from a ladder.Ability to pass a drug and alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant Company 30%, empl 70%. To offset the deductible?company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Austin, Minnesota
        • Permanent
        • $26.00 - $29.00 per hour
        • 6:00 AM - 4:00 PM
        Structural Steel Detailer, DrafterResponsibilities:Drafter transfers information off contract documents/governing codes and draft them in shop drawing format.Working hours: 6:00 AM - 4:00 PMSkills:Proficient at reading and understanding prints and specifications.Knowledgeable in AISC Standard connections, charts and code of standard practices.Knowledgeable in IBC, OSHA, NAAMM, NOMMA, ASTM, and ANSI Codes.Knowledgeable in AWS Welding symbols.Familiar with standard steel shapes and sizes.Good working knowledge of steel joists and deck.Education:TradeExperience:1-4 yearsQualifications:Competent at using AutoCAD 2014, SDS2, Microsoft Office, and Adobe.Must be neat, punctual, dependable, have attention to details, follow instructions, work under pressure, organized, able to multi-task and willing to learn.Should be able to make changes to shop drawings and follow through with the changes completely.Ability to pass a drug/alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant Company 30%, empl 70%. To offset the deductible, company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Structural Steel Detailer, DrafterResponsibilities:Drafter transfers information off contract documents/governing codes and draft them in shop drawing format.Working hours: 6:00 AM - 4:00 PMSkills:Proficient at reading and understanding prints and specifications.Knowledgeable in AISC Standard connections, charts and code of standard practices.Knowledgeable in IBC, OSHA, NAAMM, NOMMA, ASTM, and ANSI Codes.Knowledgeable in AWS Welding symbols.Familiar with standard steel shapes and sizes.Good working knowledge of steel joists and deck.Education:TradeExperience:1-4 yearsQualifications:Competent at using AutoCAD 2014, SDS2, Microsoft Office, and Adobe.Must be neat, punctual, dependable, have attention to details, follow instructions, work under pressure, organized, able to multi-task and willing to learn.Should be able to make changes to shop drawings and follow through with the changes completely.Ability to pass a drug/alcohol screen. Direct Hire position with family owned and operated business. Great Benefits including Major Medical $4,250 Deductible. Company pays 80%, empl 20%. Dependant Company 30%, empl 70%. To offset the deductible, company deposits $100/Mth into an HAS account for employees = $1,200yr HSA HS Diploma NOT required.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $18.00 - $20.00 per hour
        • 7:00 AM - 3:30 PM
        Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Second Ops on molded manufactured parts.Responsibilities:Basic machining on molded manufactured parts that may need additional work such as open a hole with too much plastic overflow by reaming and drilling.Working hours: 7:00 AM - 3:30 PMSkills:Basic machining skills. Mechanically inclined. Knowledge of engine laze, Bridgeport mill, surface grinding, reaming & drilling. CNC experience helpful but not required. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. . DIRECT HIRE with a company in Albert Lea that has been around for a very long time and expanding quickly. Known for their willingness to offer 2nd chances in life to employees willing to work hard and prove themselves.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $16.77 per hour
        • 6:00 AM - 6:30 PM
        The Lacquer Spray Machine (L.S.M.) Operators are responsible for the application of the lacquer spray coating to the inside of the can in compliance with quality control specifications. They have primary control of the processing of cans from the point of infeeding of cans into the conveying above the spray machines, until they reach the Internal Bake Ovens (I.B.O.?s).Responsibilities:1. Clearing can jams from Lacquer Spray Machines and from upper conveyors.2. Check and monitor the following: Clean canworksOverall quality of cans Lacquer pressure of LSMsesTemperature of lacquerCopper sulfate checks on flanges3. Monitor, measure and enter into the computer the following data: Metal exposure of cans Weight of lacquer on inside of cansFilm weight distribution 4. Maintain cleanliness of machines including the spray nozzles, turrent wheels, lacquer overspray boxes, machine exterior and general work area. Follow all safety procedures and PPE requirements.5. Perform routine maintenance including the setting of guns, nozzles, can guides and spray delay.6. Perform preventative maintenance which includes the replacement of drive and conveyor belts to the oven, tips, rails, guns, lacquer and vacuum filters.7. Follow proper material handling procedures, which includes proper disposal of waste lacquer and labeling of waste barrels.8. Perform Equipment Set-up Evaluations (ESE) on LSMs after adjustment or changes are made.9. Monitor and assist other production processes on the Back End to ensure a constant flow of cans into and through the LSM process.10. Other duties as required.Working hours: 6:00 AM - 6:30 PMSkills:1. Basic Mechanical Skills2. Basic computer skills to perform data entry.Education:High SchoolExperience:0-1 yearsQualifications:Knowledge of SPC programs and be able to interpret SPC data for trends, principles graphs charts4. Know how to complete and document an ESE for the LSMs.5. Working knowledge of the operation, setup, preventative maintenance & repair, and troubleshooting in the LSM process.6AM - 6PM. 4 on 4 off - could go to full-time. Immediate Openings! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The Lacquer Spray Machine (L.S.M.) Operators are responsible for the application of the lacquer spray coating to the inside of the can in compliance with quality control specifications. They have primary control of the processing of cans from the point of infeeding of cans into the conveying above the spray machines, until they reach the Internal Bake Ovens (I.B.O.?s).Responsibilities:1. Clearing can jams from Lacquer Spray Machines and from upper conveyors.2. Check and monitor the following: Clean canworksOverall quality of cans Lacquer pressure of LSMsesTemperature of lacquerCopper sulfate checks on flanges3. Monitor, measure and enter into the computer the following data: Metal exposure of cans Weight of lacquer on inside of cansFilm weight distribution 4. Maintain cleanliness of machines including the spray nozzles, turrent wheels, lacquer overspray boxes, machine exterior and general work area. Follow all safety procedures and PPE requirements.5. Perform routine maintenance including the setting of guns, nozzles, can guides and spray delay.6. Perform preventative maintenance which includes the replacement of drive and conveyor belts to the oven, tips, rails, guns, lacquer and vacuum filters.7. Follow proper material handling procedures, which includes proper disposal of waste lacquer and labeling of waste barrels.8. Perform Equipment Set-up Evaluations (ESE) on LSMs after adjustment or changes are made.9. Monitor and assist other production processes on the Back End to ensure a constant flow of cans into and through the LSM process.10. Other duties as required.Working hours: 6:00 AM - 6:30 PMSkills:1. Basic Mechanical Skills2. Basic computer skills to perform data entry.Education:High SchoolExperience:0-1 yearsQualifications:Knowledge of SPC programs and be able to interpret SPC data for trends, principles graphs charts4. Know how to complete and document an ESE for the LSMs.5. Working knowledge of the operation, setup, preventative maintenance & repair, and troubleshooting in the LSM process.6AM - 6PM. 4 on 4 off - could go to full-time. Immediate Openings! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $20.95 per hour
        • 5:00 PM - 6:00 AM
        The Front End Maintainers work 12-hour shifts on for four days and off for four days. There are typically 3 Front End Maintainers on at one time. The Front End Maintainers initiate the can making process. Steel coils are transported by a fork lift to the upender where they are tipped on to their side. They are then transported again by coil car to the unwinder where they are mounted in place. Two Front End Maintainers guide the steel sheet through the lubricator and into the press.From this point the Front End Maintainers are responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.Responsibilities:Duties And Responsibilities: Inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press. Set-up, maintenance and operation of the upender, unwinder, lubricator, and cupping press. Set-up maintenance and operation of the body makers, trimmers, and conveying systems. Inspect and monitor, then enter into computer the following can specifications: - flange wall thickness - mid-wall thickness - dome depth - trim can height Perform visual checks and cup weights to insure that process is in compliance and take appropriate measures. Assist in other areas as needed to maintain smooth can flow through the plant.Working hours: 5:00 PM - 6:00 AMSkills:Complete required paperwork and documentation such as coil log, check sheets, etc. Maintain cleanliness of all work areas and machines and practice proper safety procedures. Performs other job-related duties as required or assigned.Education:High SchoolExperience:0-1 yearsQualifications:HS Diploma Pay Increased! Join this great team! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The Front End Maintainers work 12-hour shifts on for four days and off for four days. There are typically 3 Front End Maintainers on at one time. The Front End Maintainers initiate the can making process. Steel coils are transported by a fork lift to the upender where they are tipped on to their side. They are then transported again by coil car to the unwinder where they are mounted in place. Two Front End Maintainers guide the steel sheet through the lubricator and into the press.From this point the Front End Maintainers are responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.Responsibilities:Duties And Responsibilities: Inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press. Set-up, maintenance and operation of the upender, unwinder, lubricator, and cupping press. Set-up maintenance and operation of the body makers, trimmers, and conveying systems. Inspect and monitor, then enter into computer the following can specifications: - flange wall thickness - mid-wall thickness - dome depth - trim can height Perform visual checks and cup weights to insure that process is in compliance and take appropriate measures. Assist in other areas as needed to maintain smooth can flow through the plant.Working hours: 5:00 PM - 6:00 AMSkills:Complete required paperwork and documentation such as coil log, check sheets, etc. Maintain cleanliness of all work areas and machines and practice proper safety procedures. Performs other job-related duties as required or assigned.Education:High SchoolExperience:0-1 yearsQualifications:HS Diploma Pay Increased! Join this great team! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $15.00 per hour
        • 6:00 AM - 4:00 PM
        Performs various industrial powder coat painting activities to produce high quality painted parts on time.Responsibilities:Review job order information and follow instructions.Prepare parts for powder coating.Select proper hooks per part to hang on the paint line.Efficiently load parts of various sizes onto paint line.Mask, plug, blow out, or protect areas on parts per print, routing or work instruction.Efficiently unload parts from paint line, inspect to ensure quality and package per customer specifications.Count and record number of completed parts per job order.Assist in touch-up painting when necessary.Clean up and properly store department supplies and maintain a neat and orderly work area.Keep department lead advised of concerns or issues.This job description is not all-inclusive, but represents the essential and general job functions. Employees are required to perform additional duties as assigned.Working hours: 6:00 AM - 4:00 PMMonday - Thursday Skills:Ability to match products to blueprints, read bills of materials and routings.Must be reliable, have attention to detail, and contribute positively to a team environment.Ability to listen effectively, follow direction, and communicate clearly with others.Education:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Previous experience in a manufacturing environment preferred. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Performs various industrial powder coat painting activities to produce high quality painted parts on time.Responsibilities:Review job order information and follow instructions.Prepare parts for powder coating.Select proper hooks per part to hang on the paint line.Efficiently load parts of various sizes onto paint line.Mask, plug, blow out, or protect areas on parts per print, routing or work instruction.Efficiently unload parts from paint line, inspect to ensure quality and package per customer specifications.Count and record number of completed parts per job order.Assist in touch-up painting when necessary.Clean up and properly store department supplies and maintain a neat and orderly work area.Keep department lead advised of concerns or issues.This job description is not all-inclusive, but represents the essential and general job functions. Employees are required to perform additional duties as assigned.Working hours: 6:00 AM - 4:00 PMMonday - Thursday Skills:Ability to match products to blueprints, read bills of materials and routings.Must be reliable, have attention to detail, and contribute positively to a team environment.Ability to listen effectively, follow direction, and communicate clearly with others.Education:High SchoolExperience:0-1 yearsQualifications:High school diploma or equivalent.Previous experience in a manufacturing environment preferred. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $16.00 - $21.00 per hour
        • 6:00 AM - 4:00 PM
        The Welder is responsible for weld preparation and set-up, welding and finishing operations to ensure quality parts are produced to print, within established production standards.Responsibilities:Welding preparation and set up, including fixturing.Application and product specific welding techniques.Finish grinding or other finishing operations.Examine and inspect finished parts with a variety of precision and inspection measuring instruments, recognize non-conforming parts.Welding equipment maintenance.This job description is not all-inclusive, but represents the essential and general job functions. Employees are required to perform additional duties as assigned.Working hours: 6:00 AM - 4:00 PMMonday-ThursdaySkills:Proficient in assigned welding techniques, may include MIG, TIG and spot.Knowledge of wire and filler materials specific to metals being welded.Ability to read blueprints and interpret bills of materials and routings.Must be reliable, cooperative, with high attention to detail, and work well independently and as part of a team.Ability to prioritize work and respond accordingly to the demands of various departments in order to keep production flowing.Participate in a culture of mutual trust and respect, with teamwork and accountability to each other and to organization goals.Education:High SchoolExperience:1-4 yearsQualifications:Technical training or welding certification, or welding experience of 1 year.Manufacturing experience preferred.Must pass Company's internal welding test APPLY TODAY!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The Welder is responsible for weld preparation and set-up, welding and finishing operations to ensure quality parts are produced to print, within established production standards.Responsibilities:Welding preparation and set up, including fixturing.Application and product specific welding techniques.Finish grinding or other finishing operations.Examine and inspect finished parts with a variety of precision and inspection measuring instruments, recognize non-conforming parts.Welding equipment maintenance.This job description is not all-inclusive, but represents the essential and general job functions. Employees are required to perform additional duties as assigned.Working hours: 6:00 AM - 4:00 PMMonday-ThursdaySkills:Proficient in assigned welding techniques, may include MIG, TIG and spot.Knowledge of wire and filler materials specific to metals being welded.Ability to read blueprints and interpret bills of materials and routings.Must be reliable, cooperative, with high attention to detail, and work well independently and as part of a team.Ability to prioritize work and respond accordingly to the demands of various departments in order to keep production flowing.Participate in a culture of mutual trust and respect, with teamwork and accountability to each other and to organization goals.Education:High SchoolExperience:1-4 yearsQualifications:Technical training or welding certification, or welding experience of 1 year.Manufacturing experience preferred.Must pass Company's internal welding test APPLY TODAY!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $15.00 - $19.00 per hour
        • 4:00 PM - 2:00 AM
        The Laser Operator will be responsible for the set-up and operation of the laser to ensure quality parts are produced to print, within established production standards.Responsibilities:Set up laser by selecting proper program, tooling, and materials. Make adjustments to programming as needed.Examine and inspect finished parts with a variety of precision and inspection measuring instruments, recognize non-conforming parts.Operate manual machines, such as a grinder, as needed to produce parts per print.This job description is not all-inclusive, but represents the essential and general job functions. Employees are required to perform additional duties as assigned.Working hours: 4:00 PM - 2:00 AMMonday-ThursdaySkills:Ability to read blueprints and interpret bills of materials and routings.Must be reliable, cooperative, with high attention to detail, and work well independently and as part of a team.Ability to prioritize work and respond accordingly to the demands of various departments in order to keep production flowing.Participate in a culture of mutual trust and respect, with teamwork and accountability to each other and to organization goals.Education:High SchoolExperience:1-4 yearsQualifications:Manufacturing experience of 2-5 years, orTechnical training related to CNC machine operation. APPLY TODAY!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The Laser Operator will be responsible for the set-up and operation of the laser to ensure quality parts are produced to print, within established production standards.Responsibilities:Set up laser by selecting proper program, tooling, and materials. Make adjustments to programming as needed.Examine and inspect finished parts with a variety of precision and inspection measuring instruments, recognize non-conforming parts.Operate manual machines, such as a grinder, as needed to produce parts per print.This job description is not all-inclusive, but represents the essential and general job functions. Employees are required to perform additional duties as assigned.Working hours: 4:00 PM - 2:00 AMMonday-ThursdaySkills:Ability to read blueprints and interpret bills of materials and routings.Must be reliable, cooperative, with high attention to detail, and work well independently and as part of a team.Ability to prioritize work and respond accordingly to the demands of various departments in order to keep production flowing.Participate in a culture of mutual trust and respect, with teamwork and accountability to each other and to organization goals.Education:High SchoolExperience:1-4 yearsQualifications:Manufacturing experience of 2-5 years, orTechnical training related to CNC machine operation. APPLY TODAY!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Temporary
        • $18.00 per hour
        • 6:00 AM - 2:30 PM
        Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:??? All duties of a Laboratory Aide and Technician I as needed??? Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time??? Conducts and documents testing within prescribed timeframe, as per designated SOP's??? Maintain the various lab databases??? Maintain raw material skip lot testing program??? Assist in conducting complex standardized lab test methods according to established protocols and methods??? Assist in simple instrument maintenance and repair??? Assist in preparation of test solutions, reagents and chemical compounds??? Assist in the stability testing program??? Report analytical results according to sample reporting requirements??? Release raw materials for production use??? Work in a team environment with only minimal supervision??? Conduct basic standardized lab tests??? Assist in ordering laboratory equipment, supplies, standards and reagents??? Train and provide technical assistance to laboratory personnel as required??? Assist in performing basic mathematical and statistical analyses of results??? Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval??? Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary??? Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training??? Track and analyze samples for microbial growth??? Prepare media, plates, and conduct sample destruction in the microbiology lab??? Other duties as assignedWorking hours: 6:00 AM - 2:30 PMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:??? AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful??? Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word)??? Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls??? Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing.??? Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Responsible for tracking and analysis of samples; prepare documents relating to product specifications and analysis results; conduct basic analytical testing of samples; Assist in conducting complex standardized lab test methods according to established protocols and methods; Generate release report documents and maintain controlled documents. Keeps work area and equipment safe, clean and in good working order.Responsibilities:??? All duties of a Laboratory Aide and Technician I as needed??? Track and monitor the flow of samples through the laboratory to make sure analyses are completed in the allotted time??? Conducts and documents testing within prescribed timeframe, as per designated SOP's??? Maintain the various lab databases??? Maintain raw material skip lot testing program??? Assist in conducting complex standardized lab test methods according to established protocols and methods??? Assist in simple instrument maintenance and repair??? Assist in preparation of test solutions, reagents and chemical compounds??? Assist in the stability testing program??? Report analytical results according to sample reporting requirements??? Release raw materials for production use??? Work in a team environment with only minimal supervision??? Conduct basic standardized lab tests??? Assist in ordering laboratory equipment, supplies, standards and reagents??? Train and provide technical assistance to laboratory personnel as required??? Assist in performing basic mathematical and statistical analyses of results??? Assist with the Stability program. Pull and log in samples for observation/testing at appropriate interval??? Coordinate testing with other departments (Micros and Analytical) and outside labs when necessary??? Ensure samples are returned to appropriate locations or disposed of when testing is finished; Use Chain of Custody to track sample location and disposalDepending on experience/training??? Track and analyze samples for microbial growth??? Prepare media, plates, and conduct sample destruction in the microbiology lab??? Other duties as assignedWorking hours: 6:00 AM - 2:30 PMSkills:Ability to interpret, analyze, reason and plan WORKING CONDITIONS: - Laboratory environment with exposure to corrosives, acid fumes, caustic and toxic substancesEducation:High SchoolExperience:0-1 yearsQualifications:??? AS Chemistry 0-1 years of laboratory experience or 3 years laboratory experience; Quality control experience helpful??? Experience and knowledge of Microsoft Office Applications (especially Excel, Access and Word)??? Comprehensive knowledge of laboratory procedures, testing instrumentation, and experimental design and controls??? Experience with the following analytical instruments is useful: Combustion analyzers, pH Meter, FT-IR, physical property testing.??? Experience with microbiological assays and aseptic techniques are helpful Work for a company that values their employees, and has one of the best Benefits Packages you'll find! Click APPLY right NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $16.00 - $21.00 per hour
        • 4:00 PM - 2:00 AM
        Machinist will be responsible for the set-up and operation of the CNC mill, CNC lathe, and manual drill press machines to ensure quality parts are produced to print, within established production standards.Responsibilities:Set up machines by selecting proper program and tooling. Make adjustments to programming as needed.Examine and inspect finished parts with a variety of precision and inspection measuring instruments, recognize non-conforming parts.Operate manual machines, such as a drill press, as needed to meet production demands.This job description is not all-inclusive, but represents the essential and general job functions. Employees are required to perform additional duties as assigned.Working hours: 4:00 PM - 2:00 AMMonday - Thursday Skills:Ability to read blueprints and interpret bills of materials and routings.Must be reliable, cooperative, with high attention to detail, and work well independently and as part of a team.Ability to prioritize work and respond accordingly to the demands of various departments in order to keep production flowing.Participate in a culture of mutual trust and respect, with teamwork and accountability to each other and to organization goals.Education:High SchoolExperience:4-7 yearsQualifications:Manufacturing experience of 2-5 years, orTechnical training related to CNC machine operation. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Machinist will be responsible for the set-up and operation of the CNC mill, CNC lathe, and manual drill press machines to ensure quality parts are produced to print, within established production standards.Responsibilities:Set up machines by selecting proper program and tooling. Make adjustments to programming as needed.Examine and inspect finished parts with a variety of precision and inspection measuring instruments, recognize non-conforming parts.Operate manual machines, such as a drill press, as needed to meet production demands.This job description is not all-inclusive, but represents the essential and general job functions. Employees are required to perform additional duties as assigned.Working hours: 4:00 PM - 2:00 AMMonday - Thursday Skills:Ability to read blueprints and interpret bills of materials and routings.Must be reliable, cooperative, with high attention to detail, and work well independently and as part of a team.Ability to prioritize work and respond accordingly to the demands of various departments in order to keep production flowing.Participate in a culture of mutual trust and respect, with teamwork and accountability to each other and to organization goals.Education:High SchoolExperience:4-7 yearsQualifications:Manufacturing experience of 2-5 years, orTechnical training related to CNC machine operation. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $16.00 - $21.00 per hour
        • 6:00 AM - 4:00 PM
        Machinist will be responsible for the set-up and operation of the CNC mill, CNC lathe, and manual drill press machines to ensure quality parts are produced to print, within established production standards.Responsibilities:Set up machines by selecting proper program and tooling. Make adjustments to programming as needed.Examine and inspect finished parts with a variety of precision and inspection measuring instruments, recognize non-conforming parts.Operate manual machines, such as a drill press, as needed to meet production demands.This job description is not all-inclusive, but represents the essential and general job functions. Employees are required to perform additional duties as assigned.Working hours: 6:00 AM - 4:00 PMSkills:Ability to read blueprints and interpret bills of materials and routings.Must be reliable, cooperative, with high attention to detail, and work well independently and as part of a team.Ability to prioritize work and respond accordingly to the demands of various departments in order to keep production flowing.Participate in a culture of mutual trust and respect, with teamwork and accountability to each other and to organization goals.Education:High SchoolExperience:4-7 yearsQualifications:Manufacturing experience of 2-5 years, orTechnical training related to CNC machine operation. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Machinist will be responsible for the set-up and operation of the CNC mill, CNC lathe, and manual drill press machines to ensure quality parts are produced to print, within established production standards.Responsibilities:Set up machines by selecting proper program and tooling. Make adjustments to programming as needed.Examine and inspect finished parts with a variety of precision and inspection measuring instruments, recognize non-conforming parts.Operate manual machines, such as a drill press, as needed to meet production demands.This job description is not all-inclusive, but represents the essential and general job functions. Employees are required to perform additional duties as assigned.Working hours: 6:00 AM - 4:00 PMSkills:Ability to read blueprints and interpret bills of materials and routings.Must be reliable, cooperative, with high attention to detail, and work well independently and as part of a team.Ability to prioritize work and respond accordingly to the demands of various departments in order to keep production flowing.Participate in a culture of mutual trust and respect, with teamwork and accountability to each other and to organization goals.Education:High SchoolExperience:4-7 yearsQualifications:Manufacturing experience of 2-5 years, orTechnical training related to CNC machine operation. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Austin, Minnesota
        • Permanent
        • $24.00 - $38.00 per hour
        • 6:00 AM - 5:00 PM
        Reliability Maintenance Engineer to be responsible for the execution of preventive & predictive programs at our client sites, which includes health facilities and ethanol plants. This position will be responsible to ensure a safe and efficient work environment along with proper documentation of the work performed. A Reliability Maintenance Engineer will provide corrective maintenance solutions for rotating and mechanical systems to be implemented on equipment in multiple facilities. As a team member you will be expected to work independently and make technical decisions and recommendations in the field.Responsibilities:Perform major equipment installation, maintenance, overhauls and inspections ? including corrective, preventative or predictive work of industrial mechanical and rotating systems and equipment (For Example: Hammer Mills, Pumps, Centrifugal Pumps, Turbines, Cooling Towers, Fans, etc?)This position requires a combination of mechanical and diagnostics work. Compliance with workplace policies and procedures for risk identification, risk assessment and risk control Active participation in activities associated with the management of workplace health and safety Identification and reporting of health and safety risks, accidents, incidents, injuries and property damage at the workplace Correct utilization of appropriate personal protective equipmentWorking hours: 6:00 AM - 5:00 PMSkills:-Excellent customer communication skills. External contacts include Tech Support and Plant Maintenance Supervisor-High level mechanical skills are a must-Knowledge of vibration analysis, laser alignment, and dynamic balancing are preferred, but will train. -Data Collection-SKF Software (creating routes, using route manager, importing/exporting data, speed tagging, changing input setup values)-Laser Alignment (Belt & Direct couple machines)-Balancing (Dynamic & Static Balancing) PTI will provide training as needed-Knowledge of computers and software (Word/Excel/Outlook)-Non-Destructive Testing, Ultra Sonic Testing, Oil Analysis.Education:AssociateExperience:1-4 yearsQualifications:Minimum: Associates Degree in Industrial Maintenance and/or Mechanical background in work experience. Vibration Analyst ISO Category III: Level II or obtain Level II within 2 years. PTI will provide training as needed. Manages no one. Will work with PTI employee for approximately the first 6-12 mths. Able to work required hours. Hours are dictated by job/customer needs. Typical hours are four 10-12 hour days per week, and available for jobs that pop up on Fridays. Anything over 12 hours is overtime. Required to work 8-10 nights/month and be part of an on-call schedule. The Employee will be required to work in different plant environments throughout the Midwest. Heres an example of hard work paying off! If you have an Associates Degree in Industrial Maintenance and/or Mechanical background in work experience and willing to put in the time.this company is willing to compensate you well for it, PLUS a full Benefit Package and Clothing Allowance!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Reliability Maintenance Engineer to be responsible for the execution of preventive & predictive programs at our client sites, which includes health facilities and ethanol plants. This position will be responsible to ensure a safe and efficient work environment along with proper documentation of the work performed. A Reliability Maintenance Engineer will provide corrective maintenance solutions for rotating and mechanical systems to be implemented on equipment in multiple facilities. As a team member you will be expected to work independently and make technical decisions and recommendations in the field.Responsibilities:Perform major equipment installation, maintenance, overhauls and inspections ? including corrective, preventative or predictive work of industrial mechanical and rotating systems and equipment (For Example: Hammer Mills, Pumps, Centrifugal Pumps, Turbines, Cooling Towers, Fans, etc?)This position requires a combination of mechanical and diagnostics work. Compliance with workplace policies and procedures for risk identification, risk assessment and risk control Active participation in activities associated with the management of workplace health and safety Identification and reporting of health and safety risks, accidents, incidents, injuries and property damage at the workplace Correct utilization of appropriate personal protective equipmentWorking hours: 6:00 AM - 5:00 PMSkills:-Excellent customer communication skills. External contacts include Tech Support and Plant Maintenance Supervisor-High level mechanical skills are a must-Knowledge of vibration analysis, laser alignment, and dynamic balancing are preferred, but will train. -Data Collection-SKF Software (creating routes, using route manager, importing/exporting data, speed tagging, changing input setup values)-Laser Alignment (Belt & Direct couple machines)-Balancing (Dynamic & Static Balancing) PTI will provide training as needed-Knowledge of computers and software (Word/Excel/Outlook)-Non-Destructive Testing, Ultra Sonic Testing, Oil Analysis.Education:AssociateExperience:1-4 yearsQualifications:Minimum: Associates Degree in Industrial Maintenance and/or Mechanical background in work experience. Vibration Analyst ISO Category III: Level II or obtain Level II within 2 years. PTI will provide training as needed. Manages no one. Will work with PTI employee for approximately the first 6-12 mths. Able to work required hours. Hours are dictated by job/customer needs. Typical hours are four 10-12 hour days per week, and available for jobs that pop up on Fridays. Anything over 12 hours is overtime. Required to work 8-10 nights/month and be part of an on-call schedule. The Employee will be required to work in different plant environments throughout the Midwest. Heres an example of hard work paying off! If you have an Associates Degree in Industrial Maintenance and/or Mechanical background in work experience and willing to put in the time.this company is willing to compensate you well for it, PLUS a full Benefit Package and Clothing Allowance!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $19.00 per hour
        • 2:00 PM - 10:15 PM
        Sets up and operates a variety of presses to perform repetitive work. Performs manual operation only, using pre-sheared strip and blank size stock for a variety of materials. Adjusts mechanical knockout devices and ram stroke. Performs minor repair of dies and determines when maintenance is required. Obtains first piece approval from inspection. Arranges work places, furnishes materials and manufacturing information, and demonstrates operation of equipment to lower level operators. Monitors operation of equipment during production run and makes any necessary adjustments.Responsibilities:?Performs sheet metal operations to fabricate a limited variety of units or products of more standard design.?May do simple layout work.?Able to operate all types of sheet metal machines to cut bend or form parts and uses sheet metal hand tools.?Plans, lays out and performs all types of sheet metal operations to fabricate wide variety of units or products of complex design involving close tolerances.?Must set up and operate all types of sheet metal machines to cut, bend or form parts.?Uses a variety of sheet metal hand tools and measuring instruments.?Uses shop mathematics.Working hours: 2:00 PM - 10:15 PMSkills:--High mechanical aptitude--Knowledge of CNC machines--Organizational skills--Proficient with precision measuring instruments--Must be able to read blueprints--Requires some heavy liftingEducation:High SchoolExperience:0-1 yearsQualifications:?Requires passing a pre-employment screening, which includes a drug screen.High school diploma or equivalent. Able to perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversions *DIRECT HIRE* with a 100% Employee Owned Company! Benefits include Well@Work Clinic, HRA, Medical Plan, Disability & Life Plans, Retirement Plans and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Sets up and operates a variety of presses to perform repetitive work. Performs manual operation only, using pre-sheared strip and blank size stock for a variety of materials. Adjusts mechanical knockout devices and ram stroke. Performs minor repair of dies and determines when maintenance is required. Obtains first piece approval from inspection. Arranges work places, furnishes materials and manufacturing information, and demonstrates operation of equipment to lower level operators. Monitors operation of equipment during production run and makes any necessary adjustments.Responsibilities:?Performs sheet metal operations to fabricate a limited variety of units or products of more standard design.?May do simple layout work.?Able to operate all types of sheet metal machines to cut bend or form parts and uses sheet metal hand tools.?Plans, lays out and performs all types of sheet metal operations to fabricate wide variety of units or products of complex design involving close tolerances.?Must set up and operate all types of sheet metal machines to cut, bend or form parts.?Uses a variety of sheet metal hand tools and measuring instruments.?Uses shop mathematics.Working hours: 2:00 PM - 10:15 PMSkills:--High mechanical aptitude--Knowledge of CNC machines--Organizational skills--Proficient with precision measuring instruments--Must be able to read blueprints--Requires some heavy liftingEducation:High SchoolExperience:0-1 yearsQualifications:?Requires passing a pre-employment screening, which includes a drug screen.High school diploma or equivalent. Able to perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversions *DIRECT HIRE* with a 100% Employee Owned Company! Benefits include Well@Work Clinic, HRA, Medical Plan, Disability & Life Plans, Retirement Plans and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $16.00 - $18.00 per hour
        • 3:00 PM - 11:15 PM
        Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities: Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required. Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm. Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).? Maintain all lubricants and coolants on the machine that are used in daily operation. Keep work area clean. Assist lower-level operators to develop skills and to produce production parts to spec. Operates all common machine shop equipment and hand tools skillfully. Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill. Sets up machines for less skills machine operators. Produces precision items beyond the capabilities of production machine operators. Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 11:15 PMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Education:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen This is a company you want to work for! 100% Employee owned, and great benefits! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities: Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required. Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also, to review machine operating criteria such as cycle time and spindle rpm. Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).? Maintain all lubricants and coolants on the machine that are used in daily operation. Keep work area clean. Assist lower-level operators to develop skills and to produce production parts to spec. Operates all common machine shop equipment and hand tools skillfully. Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill. Sets up machines for less skills machine operators. Produces precision items beyond the capabilities of production machine operators. Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 11:15 PMSkills:Must be self-motivated and able to work responsibly with limited supervision. Must meet production standards.Education:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or equivalent. Requires two-year technical degree/certification in machining OR one year of machining experience. Requires passing a pre-employment drug screen This is a company you want to work for! 100% Employee owned, and great benefits! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Claremont, Minnesota
        • Permanent
        • $18.00 per hour
        • 6:00 AM - 6:30 PM
        Plant Operators are responsible for the safe and efficient operation of all plant process equipment,routine maintenance, and equipment and facility cleaning. Operators will develop and maintain anunderstanding of plant processes including equipment conceptual operation and design, process safety,and standard operating procedures. This company operates on a 24-hour continuous basis. Theposition entails 12 hour rotating shifts, participation in the on-call program, and occasional scheduledand unscheduled overtime.Responsibilities:1. Maintain a clean and safe working environment2. Participate in safety, health, and environmental compliance programs3. Learn about all ethanol plant process operations including grain handling, cook, fermentation,distillation, drying, oxidizers, boilers, and water treatment4. Operate the digital control system for the plant.5. Collect, analyze, and report on process and quality assurance/quality control samples, and makeadjustments to plant operations when necessary6. Collect process operations data and prepare daily logs to support the operation of the plant.7. Learn about and operate laboratory analytical equipment including HPLCs, PH meters, titrators,and microscopes8. Perform scheduled preventative maintenance and planned or unplanned repairs includingassisting the Maintenance and Utility Operator teams where required.9. Inspect and safely operate all equipment and machinery as necessary including forklifts,telehandlers, and skid loaders10. Comply with relevant safety and compliance regulations and policies in the execution of all jobtasks11. Keep the facility, including production and office areas, clean and in tour ready condition12. Be available for overtime or call-in as required13. Inspect, troubleshoot, and report on equipment operational issues including piping andmechanical problems14. Communicate verbally and in writing to coordinate with team members and other departmentsto safely execute Operations job tasks15. Other duties as assignedWorking hours: 6:00 AM - 6:30 PMSkills:1. High school diploma or equivalent required2. 2 years experience in plant operations or equivalent production or industrial environmentpreferred. No experience necessary.3. Ability to read material safety data sheets (MSDS) and ready chemical labels4. Knowledge in Microsoft Office Suite and ability to learn new software applications5. Possess a valid driver?s license and be able to driveEducation:No Degree RequiredExperience:1-4 yearsQualifications:While performing the duties of this job, the employee is frequently exposed to odors, fumes orairborne particles, moving mechanical parts and vibration. The employee is occasionally exposed toa variety of extreme outside weather conditions including wet, cold and/or humid conditions. Thenoise level in the work environment is quiet to noisy.Physical DemandsThe physical demands described here are representative of those that must be met by an employeeto successfully perform the essential functions of this job. While performing the duties of this job,the employee is regularly required to talk and hear. This position requires sitting, standing, walking,bending, kneeling, stooping, crouching, crawling, turning, reaching, climbing and balancing. Theemployee must frequently lift or move items up to 60 pounds. The employee must also be able towork at heights and in confined spaces. He employee must be able to drive a mechanical vehicle.Specific vision abilities required by this job include close vision, distance vision, color vision,peripheral vision, depth perception and ability to adjust focus. Apply Today!Spherion has helped thousands of people ju
        Plant Operators are responsible for the safe and efficient operation of all plant process equipment,routine maintenance, and equipment and facility cleaning. Operators will develop and maintain anunderstanding of plant processes including equipment conceptual operation and design, process safety,and standard operating procedures. This company operates on a 24-hour continuous basis. Theposition entails 12 hour rotating shifts, participation in the on-call program, and occasional scheduledand unscheduled overtime.Responsibilities:1. Maintain a clean and safe working environment2. Participate in safety, health, and environmental compliance programs3. Learn about all ethanol plant process operations including grain handling, cook, fermentation,distillation, drying, oxidizers, boilers, and water treatment4. Operate the digital control system for the plant.5. Collect, analyze, and report on process and quality assurance/quality control samples, and makeadjustments to plant operations when necessary6. Collect process operations data and prepare daily logs to support the operation of the plant.7. Learn about and operate laboratory analytical equipment including HPLCs, PH meters, titrators,and microscopes8. Perform scheduled preventative maintenance and planned or unplanned repairs includingassisting the Maintenance and Utility Operator teams where required.9. Inspect and safely operate all equipment and machinery as necessary including forklifts,telehandlers, and skid loaders10. Comply with relevant safety and compliance regulations and policies in the execution of all jobtasks11. Keep the facility, including production and office areas, clean and in tour ready condition12. Be available for overtime or call-in as required13. Inspect, troubleshoot, and report on equipment operational issues including piping andmechanical problems14. Communicate verbally and in writing to coordinate with team members and other departmentsto safely execute Operations job tasks15. Other duties as assignedWorking hours: 6:00 AM - 6:30 PMSkills:1. High school diploma or equivalent required2. 2 years experience in plant operations or equivalent production or industrial environmentpreferred. No experience necessary.3. Ability to read material safety data sheets (MSDS) and ready chemical labels4. Knowledge in Microsoft Office Suite and ability to learn new software applications5. Possess a valid driver?s license and be able to driveEducation:No Degree RequiredExperience:1-4 yearsQualifications:While performing the duties of this job, the employee is frequently exposed to odors, fumes orairborne particles, moving mechanical parts and vibration. The employee is occasionally exposed toa variety of extreme outside weather conditions including wet, cold and/or humid conditions. Thenoise level in the work environment is quiet to noisy.Physical DemandsThe physical demands described here are representative of those that must be met by an employeeto successfully perform the essential functions of this job. While performing the duties of this job,the employee is regularly required to talk and hear. This position requires sitting, standing, walking,bending, kneeling, stooping, crouching, crawling, turning, reaching, climbing and balancing. Theemployee must frequently lift or move items up to 60 pounds. The employee must also be able towork at heights and in confined spaces. He employee must be able to drive a mechanical vehicle.Specific vision abilities required by this job include close vision, distance vision, color vision,peripheral vision, depth perception and ability to adjust focus. Apply Today!Spherion has helped thousands of people ju
      30 of 52 jobs seen

      Thank you for subscribing to your personalized job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.