Thank you for subscribing to your personalized job alerts.

    18 jobs found in North Dakota - Page 1

    Filter3
    Clear all
      • Fargo, North Dakota
      • Permanent
      • $25.00 - $28.00 per hour
      • 8:00 AM - 5:00 PM
      Spherion Staffing is now interviewing for a Quality Supervisor position! If you have experience with quality control inspections, have excellent organizational skills, and are detail orientated we want you to apply. The Quality Supervisor will work with the Corporate Quality Department to ensure customer expectations are met. This includes both Quality Control and Quality Assurance activities in support of all departments for cross-functional success. Direct Hire OpportunityPay $25-28/hour DOEMonday-Friday 8 am-5 pm Responsibilities:- Oversee the day-to-day quality activities to maintain and communicate facility and corporate metrics and objectives- Follow all necessary Business System Manual (BSM) and/or QMS procedures and processes- Complete incoming, in-process, and final inspections and verify compliance to product quality standards- Document and segregate non-conforming material and workmanship- Record Non-Conformances, Corrective Actions, and Preventive Actions into the SharePoint Quality Database- Apply problem solving techniques and/or root cause analysis to Non-Conformances, Corrective Actions, and Preventive Actions in the SharePoint Quality Database- Review Non-Conformances, Corrective Actions, and Preventive Actions from the SharePoint Quality Database with Facility Management to identify and implement continuous improvement- Participate in all internal, third party and customer audits and inspections and implement Corrective Action where necessary- Verify Material Test Reports (MTRs) and similar documents for required information upon receipt of materials- Create service requests for calibration and non-destructive testing (NDT) suppliers that clearly state requirements to maintain acceptable quality- Remain current with industry standards, procedures, and processes- Calibrate and verify the necessary QC inspection equipment- Approve validation results for designs (as necessary) per the required specification- Perform final approval of new designs (as necessary) by verifying first article testing achieved the required design functionality and all planned arrangements were met- Organize and record quality related training activities and effectiveness evaluations for all personnel- Ability to work flexible schedules and overtime or weekends when neededResponsibilities:See aboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-High School or Diploma or GED required-Experience in a manufacturing environment-Minimum of 3 years QC Inspector experience -Must have general computer experience along with experience using spreadsheet and word processing programs-Blueprint/drawing reading-Leadership to motivate co-workers to quality workmanship-Strong ability to interact in cross-function ability-Ability to influence others to perform their jobs effectively and to be responsible for making decisionsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is now interviewing for a Quality Supervisor position! If you have experience with quality control inspections, have excellent organizational skills, and are detail orientated we want you to apply. The Quality Supervisor will work with the Corporate Quality Department to ensure customer expectations are met. This includes both Quality Control and Quality Assurance activities in support of all departments for cross-functional success. Direct Hire OpportunityPay $25-28/hour DOEMonday-Friday 8 am-5 pm Responsibilities:- Oversee the day-to-day quality activities to maintain and communicate facility and corporate metrics and objectives- Follow all necessary Business System Manual (BSM) and/or QMS procedures and processes- Complete incoming, in-process, and final inspections and verify compliance to product quality standards- Document and segregate non-conforming material and workmanship- Record Non-Conformances, Corrective Actions, and Preventive Actions into the SharePoint Quality Database- Apply problem solving techniques and/or root cause analysis to Non-Conformances, Corrective Actions, and Preventive Actions in the SharePoint Quality Database- Review Non-Conformances, Corrective Actions, and Preventive Actions from the SharePoint Quality Database with Facility Management to identify and implement continuous improvement- Participate in all internal, third party and customer audits and inspections and implement Corrective Action where necessary- Verify Material Test Reports (MTRs) and similar documents for required information upon receipt of materials- Create service requests for calibration and non-destructive testing (NDT) suppliers that clearly state requirements to maintain acceptable quality- Remain current with industry standards, procedures, and processes- Calibrate and verify the necessary QC inspection equipment- Approve validation results for designs (as necessary) per the required specification- Perform final approval of new designs (as necessary) by verifying first article testing achieved the required design functionality and all planned arrangements were met- Organize and record quality related training activities and effectiveness evaluations for all personnel- Ability to work flexible schedules and overtime or weekends when neededResponsibilities:See aboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-High School or Diploma or GED required-Experience in a manufacturing environment-Minimum of 3 years QC Inspector experience -Must have general computer experience along with experience using spreadsheet and word processing programs-Blueprint/drawing reading-Leadership to motivate co-workers to quality workmanship-Strong ability to interact in cross-function ability-Ability to influence others to perform their jobs effectively and to be responsible for making decisionsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Permanent
      • $23.00 - $25.00 per hour
      • 6:00 AM - 4:30 PM
      Spherion Staffing has a QC Welding Inspector position available in Fargo. If you have welding inspection training and 5 years' of welding experience we would love to talk to you.Direct Hire OpportunityPay $23-25/hour DOE6 am-4:30 pmResponsibilities:- Ensure that all materials and workmanship are completed in accordance with UL, STI, AWS, AISC, and CWB standards plans and specifications- Inspect fabricated material to include checking welds, cut and formed parts, band saw cut parts, layout work according to blueprint specification- Insure welding procedures are current and in place for projects- Conduct qualifications of welders to AWS and CWB standards- Review welding specs/requirements for each project- Document non-conforming fabricated material and workmanship- Review non-conformance reports with Department Supervisor and Q. C. Manager- Annual calibration of welding equipment- Remain current with AWS CWI and CWB Supervisor license, code analysis, industry standards, procedures and processes- Understand and implement company Quality Management System- Represent the company, as needed, on field issues requiring investigating and decision of associated with product quality and conformance- Operate overhead crane safelyResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-High School diploma or GED and one year experience in Quality Control.-Minimum of five years welding experience-AWS Certified Weld Inspector or Associate Inspector is preferredEducation:High SchoolExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has a QC Welding Inspector position available in Fargo. If you have welding inspection training and 5 years' of welding experience we would love to talk to you.Direct Hire OpportunityPay $23-25/hour DOE6 am-4:30 pmResponsibilities:- Ensure that all materials and workmanship are completed in accordance with UL, STI, AWS, AISC, and CWB standards plans and specifications- Inspect fabricated material to include checking welds, cut and formed parts, band saw cut parts, layout work according to blueprint specification- Insure welding procedures are current and in place for projects- Conduct qualifications of welders to AWS and CWB standards- Review welding specs/requirements for each project- Document non-conforming fabricated material and workmanship- Review non-conformance reports with Department Supervisor and Q. C. Manager- Annual calibration of welding equipment- Remain current with AWS CWI and CWB Supervisor license, code analysis, industry standards, procedures and processes- Understand and implement company Quality Management System- Represent the company, as needed, on field issues requiring investigating and decision of associated with product quality and conformance- Operate overhead crane safelyResponsibilities:See aboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-High School diploma or GED and one year experience in Quality Control.-Minimum of five years welding experience-AWS Certified Weld Inspector or Associate Inspector is preferredEducation:High SchoolExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • West Fargo, North Dakota
      • Temp to Perm
      • $16.00 - $17.00 per hour
      • Various Shifts Available
      Spherion Staffing has positions on both 1st and 2nd shifts for Assembly/Disassembly Technicians with a local manufacturing company. The Assembly/Disassembly Technicians will be cleaning parts in the assembly area and will operate a variety of tools and equipment to assemble and disassemble products in a manufacturing environment. This position will also be using a hoist/crane frequently.Pay is $16/hour + $1/hour shift differential for 2nd shift1st shift positions is 6am - 4:30pm Monday - Thursday2nd shift schedule is 4:15pm-2:45am Monday - Thursday**must be open to working overtime**Responsibilities:- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications- Use precision measuring devices to effectively assemble and/or disassemble final product - Perform preventive maintenance as required- Assist in identifying issues and initiating corrective action processes as necessary- Perform 5S Audits- Perform Safety Stop Audits observations as required- Identifies and accurately categorizes wear patterns of parts - Troubleshoot quality problemsResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements: -Minimum 2 years job related experience in a manufacturing environment preferred -Must have the ability to effectively interpret blueprints-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environment-Must have good oral and written communication skills -Ability to lift and carry up to 35 pounds -Drug, background screens and physicals are requiredEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has positions on both 1st and 2nd shifts for Assembly/Disassembly Technicians with a local manufacturing company. The Assembly/Disassembly Technicians will be cleaning parts in the assembly area and will operate a variety of tools and equipment to assemble and disassemble products in a manufacturing environment. This position will also be using a hoist/crane frequently.Pay is $16/hour + $1/hour shift differential for 2nd shift1st shift positions is 6am - 4:30pm Monday - Thursday2nd shift schedule is 4:15pm-2:45am Monday - Thursday**must be open to working overtime**Responsibilities:- Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications- Use precision measuring devices to effectively assemble and/or disassemble final product - Perform preventive maintenance as required- Assist in identifying issues and initiating corrective action processes as necessary- Perform 5S Audits- Perform Safety Stop Audits observations as required- Identifies and accurately categorizes wear patterns of parts - Troubleshoot quality problemsResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements: -Minimum 2 years job related experience in a manufacturing environment preferred -Must have the ability to effectively interpret blueprints-Proven record of good attendance-Must possess ability to deal with multiple tasks in a fast paced environment-Must have good oral and written communication skills -Ability to lift and carry up to 35 pounds -Drug, background screens and physicals are requiredEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Temp to Perm
      • $17.99 - $18.00 per hour
      • 10:30 PM - 6:30 AM
      Spherion Staffing has openings on 3rd shift for Manufacturing- Assembly associates to work with a local manufacturing company. Successful applicant will operate computer automated, high-tech machinery and equipment to produce glass units. This is a VERY physical position.$18/hour10:30pm - 6:30am Sunday - Thursday, OT as neededResponsibilities:- Run production machines that cut glass- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 10:30 PM - 6:30 AMSkills:Requirements:-High School diploma or GED -Previous assembly experience preferred-Must be able to read a tape measure-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basis-Physically capable of manual labor that includes standing, walking, lifting, bending, and reachingEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has openings on 3rd shift for Manufacturing- Assembly associates to work with a local manufacturing company. Successful applicant will operate computer automated, high-tech machinery and equipment to produce glass units. This is a VERY physical position.$18/hour10:30pm - 6:30am Sunday - Thursday, OT as neededResponsibilities:- Run production machines that cut glass- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 10:30 PM - 6:30 AMSkills:Requirements:-High School diploma or GED -Previous assembly experience preferred-Must be able to read a tape measure-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basis-Physically capable of manual labor that includes standing, walking, lifting, bending, and reachingEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Temp to Perm
      • $17.24 - $17.25 per hour
      • 2:30 PM - 10:30 PM
      Spherion Staffing has openings on 2nd shift for Glass Production Associates to work with a local manufacturing client. The Production Associate will operate computer automated, high-tech machinery and equipment to produce glass units.2:30 pm-10:30 pm Sunday-Thursday OT as needed Pay $17.25/hourResponsibilities:- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 2:30 PM - 10:30 PMSkills:Requirements:-High school diploma or GED-Previous production/assembly experience preferred-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basisEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has openings on 2nd shift for Glass Production Associates to work with a local manufacturing client. The Production Associate will operate computer automated, high-tech machinery and equipment to produce glass units.2:30 pm-10:30 pm Sunday-Thursday OT as needed Pay $17.25/hourResponsibilities:- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 2:30 PM - 10:30 PMSkills:Requirements:-High school diploma or GED-Previous production/assembly experience preferred-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basisEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Permanent
      • $20.00 - $21.00 per hour
      • 8:00 AM - 4:30 PM
      Spherion Staffing is looking for an experienced Estimator to work with a local manufacturing company. The Estimator is responsible for gathering, calculating and compiling structural steel and miscellaneous metals data for use in estimates and preparing routine estimates under general supervision. Interested candidates should have an Associate's degree in Estimating or Bachelor's degree in Construction and 2-3 years' of estimating experience.Pay $20-21/hour DOEResponsibilities:- Prepare accurate quantity surveys and estimates as assigned- Complete estimates in agreed upon time frame- Solicit subcontractor and/or supplier quotations or scheduling input as required for the assignments- Participate in plan review and estimate reviews for respective projects- Assist in compiling historical cost data for projects- Collaborate with Architects/Engineers to request clarifications or additional information- Complete pre-construction survey and other preliminary documents- Perform majority of quantity surveys and pricing estimates- Prepare vendor proposal comparison and estimate summary sheets- Develop and complete project scheduleResponsibilities:See aboveWorking hours: 8:00 AM - 4:30 PMSkills:Requirements:-Associate's degree in Estimating or Bachelor's degree in Construction-Management or equivalent experience-2-3 years' of estimating experience-Experience with structural steel and miscellaneous metals preferableEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for an experienced Estimator to work with a local manufacturing company. The Estimator is responsible for gathering, calculating and compiling structural steel and miscellaneous metals data for use in estimates and preparing routine estimates under general supervision. Interested candidates should have an Associate's degree in Estimating or Bachelor's degree in Construction and 2-3 years' of estimating experience.Pay $20-21/hour DOEResponsibilities:- Prepare accurate quantity surveys and estimates as assigned- Complete estimates in agreed upon time frame- Solicit subcontractor and/or supplier quotations or scheduling input as required for the assignments- Participate in plan review and estimate reviews for respective projects- Assist in compiling historical cost data for projects- Collaborate with Architects/Engineers to request clarifications or additional information- Complete pre-construction survey and other preliminary documents- Perform majority of quantity surveys and pricing estimates- Prepare vendor proposal comparison and estimate summary sheets- Develop and complete project scheduleResponsibilities:See aboveWorking hours: 8:00 AM - 4:30 PMSkills:Requirements:-Associate's degree in Estimating or Bachelor's degree in Construction-Management or equivalent experience-2-3 years' of estimating experience-Experience with structural steel and miscellaneous metals preferableEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Permanent
      • $20.00 - $2175.00 per hour
      • 4:30 PM - 2:00 AM
      Spherion Staffing is looking for experienced Industrial Painters for 2nd shift. This position is responsible for various application processes on the exterior and interior of the products. These processes include; surface preparation, application of coatings and inspection of finished products all while meeting customer and/or our internal quality specifications.Hours 4:30 pm-2 amPay $20-21.75/hour DOEResponsibilities:- Apply exterior coatings to structural and tank products- Be trained in surface preparations using blast and solvent cleaning processes and application of coatings products- Assist in the loading/unloading of product onto flatbeds/trailers- Operate fork lift and overhead crane- Willing to work flexible hours that includes overtime and weekends as neededResponsibilities:See aboveWorking hours: 4:30 PM - 2:00 AMSkills:Requirements:-High School diploma or GED required-Basic understanding of hand tools and application techniques-Basic knowledge of substrate prep for painting-Ability to successfully pass application qualification training-Basic knowledge of lifting and rigging-Ability to pay attention to the minute details of a project or task and perform work accurately and thoroughlyEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for experienced Industrial Painters for 2nd shift. This position is responsible for various application processes on the exterior and interior of the products. These processes include; surface preparation, application of coatings and inspection of finished products all while meeting customer and/or our internal quality specifications.Hours 4:30 pm-2 amPay $20-21.75/hour DOEResponsibilities:- Apply exterior coatings to structural and tank products- Be trained in surface preparations using blast and solvent cleaning processes and application of coatings products- Assist in the loading/unloading of product onto flatbeds/trailers- Operate fork lift and overhead crane- Willing to work flexible hours that includes overtime and weekends as neededResponsibilities:See aboveWorking hours: 4:30 PM - 2:00 AMSkills:Requirements:-High School diploma or GED required-Basic understanding of hand tools and application techniques-Basic knowledge of substrate prep for painting-Ability to successfully pass application qualification training-Basic knowledge of lifting and rigging-Ability to pay attention to the minute details of a project or task and perform work accurately and thoroughlyEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Permanent
      • $21.99 - $22.00 per hour
      • 8:00 AM - 4:30 PM
      Spherion Staffing is interviewing for Welder/Fabricators to work within a local industrial company. The Welder is responsible for simple performing flat and horizontal welds and flat groove welds. Monday - Friday 1st shift with approx. 5 hours a week of overtime as requiredPay: $22/hour Responsibilities:- Work on basic manufacturing assignments that have set standards- Problem solve simple and non-complex issues that need little judgment- Perform measurements within specified tolerances- Learn to read blueprints- Perform simple flat and horizontal welds and flat groove welds- Fit and weld subassemblies with tack or spot weld- Perform measurements within specified tolerancesResponsibilities:See aboveWorking hours: 8:00 AM - 4:30 PMSkills:Requirements:- High School diploma or GED - Welding experience preferredEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is interviewing for Welder/Fabricators to work within a local industrial company. The Welder is responsible for simple performing flat and horizontal welds and flat groove welds. Monday - Friday 1st shift with approx. 5 hours a week of overtime as requiredPay: $22/hour Responsibilities:- Work on basic manufacturing assignments that have set standards- Problem solve simple and non-complex issues that need little judgment- Perform measurements within specified tolerances- Learn to read blueprints- Perform simple flat and horizontal welds and flat groove welds- Fit and weld subassemblies with tack or spot weld- Perform measurements within specified tolerancesResponsibilities:See aboveWorking hours: 8:00 AM - 4:30 PMSkills:Requirements:- High School diploma or GED - Welding experience preferredEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Temp to Perm
      • $17.69 - $17.70 per hour
      • 10:15 PM - 6:15 AM
      Spherion Staffing is looking for 3rd shift production workers to assemble electronic boards for John Deere in Fargo. The Electronics Assembler is responsible for performing various assembly tasks for the manufacturing process, recording product statistical measurements, and self-managing to ensure productivity and quality levels are met. Qualified applicants should have clear verbal and written communication skills, prior manufacturing or assembly experience, familiarity with hand tools, and be able to repeatedly lift up to 50 pounds.10:15 pm -6:15 am $17.70/hour$800 Performance bonus availableResponsibilities:- Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria - Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 10:15 PM - 6:15 AMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved-Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for 3rd shift production workers to assemble electronic boards for John Deere in Fargo. The Electronics Assembler is responsible for performing various assembly tasks for the manufacturing process, recording product statistical measurements, and self-managing to ensure productivity and quality levels are met. Qualified applicants should have clear verbal and written communication skills, prior manufacturing or assembly experience, familiarity with hand tools, and be able to repeatedly lift up to 50 pounds.10:15 pm -6:15 am $17.70/hour$800 Performance bonus availableResponsibilities:- Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria - Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 10:15 PM - 6:15 AMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved-Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Temp to Perm
      • $16.19 - $16.20 per hour
      • 6:15 AM - 2:15 PM
      Spherion Staffing has openings at John Deere on first shift for assembly of Electronic Control Panels and Printed Circuit Boards (PCBs). Qualified candidates must be able to speak, read and comprehend the English language very well.1st shift 6:15 am to 2:15 pm Monday through Friday with the potential of overtime during seasonal peaks$16.20/hour$800 Performance bonus availableResponsibilities: - Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria- Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 6:15 AM - 2:15 PMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved-Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has openings at John Deere on first shift for assembly of Electronic Control Panels and Printed Circuit Boards (PCBs). Qualified candidates must be able to speak, read and comprehend the English language very well.1st shift 6:15 am to 2:15 pm Monday through Friday with the potential of overtime during seasonal peaks$16.20/hour$800 Performance bonus availableResponsibilities: - Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria- Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 6:15 AM - 2:15 PMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved-Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Temp to Perm
      • $17.19 - $17.20 per hour
      • 2:15 PM - 10:15 PM
      Spherion Staffing is now interviewing for 2nd shift Electronic Assembly positions for John Deere in Fargo. Qualified candidates will assemble Electronic Control Panels and Printed Circuit Boards (PCBs). Qualified candidates must be able to speak, read and comprehend the English language very well.2nd shift 2:15 pm-10:15 pm Monday through Friday with the potential of overtime during seasonal peaks$17.20/hour$800 Performance bonus availableResponsibilities: - Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria- Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 2:15 PM - 10:15 PMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved. -Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is now interviewing for 2nd shift Electronic Assembly positions for John Deere in Fargo. Qualified candidates will assemble Electronic Control Panels and Printed Circuit Boards (PCBs). Qualified candidates must be able to speak, read and comprehend the English language very well.2nd shift 2:15 pm-10:15 pm Monday through Friday with the potential of overtime during seasonal peaks$17.20/hour$800 Performance bonus availableResponsibilities: - Perform assembly as required by manufacturing processes- Must stay current with relevant acceptance criteria- Record any product statistical measurements- Maintain a clean and organized work area- Maintain flexible hoursResponsibilities:See aboveWorking hours: 2:15 PM - 10:15 PMSkills:Requirements: -High School Diploma or equivalent -Candidates must be able to speak, read and comprehend the English language very well-Safety shoes with internal metatarsal protection required. Must be ASTM approved. -Manufacturing or assembly experience preferred -Must be able to read, interpret, and follow work instructions (MWI, SOP, etc.)-Experience with productivity, quality, and safety and environmental language and goals -Demonstrated hand tool knowledge and operation-Must be capable of distinguishing part and quantity numbersEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Terfehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Temp to Perm
      • $16.99 - $1700.00 per hour
      • 6:30 AM - 2:30 PM
      Spherion Staffing is interviewing for Rack Assembly/Repair positions with a local manufacturing client. This position will be repairing production racks. Candidates will be operating manual and power tools to complete assigned tasks.Schedule: Monday -Friday 6:30 am-2:30 pmPay $17/hourResponsibilities:- Repair of all production racks, including harp racks, a-frames, bungee racks, and stock racks, and replacing/repairing parts on racks where needed- Help with inventory of rack repair supplies- Communicate in a timely matter when more supplies are needed/entering material needs on a work order- Maintain the appropriate records by recording the results of work done.- Take the initiative to fix flaws in welds or structural imperfections on racksResponsibilities:See aboveWorking hours: 6:30 AM - 2:30 PMSkills:Requirements:-Must be mechanically inclined and able to read a measuring tape-Must be able to stand on feet for extended periods of time-Ability to lift 55#'s on a regular basis-Pre-employment drug test-Criminal BackgroundEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is interviewing for Rack Assembly/Repair positions with a local manufacturing client. This position will be repairing production racks. Candidates will be operating manual and power tools to complete assigned tasks.Schedule: Monday -Friday 6:30 am-2:30 pmPay $17/hourResponsibilities:- Repair of all production racks, including harp racks, a-frames, bungee racks, and stock racks, and replacing/repairing parts on racks where needed- Help with inventory of rack repair supplies- Communicate in a timely matter when more supplies are needed/entering material needs on a work order- Maintain the appropriate records by recording the results of work done.- Take the initiative to fix flaws in welds or structural imperfections on racksResponsibilities:See aboveWorking hours: 6:30 AM - 2:30 PMSkills:Requirements:-Must be mechanically inclined and able to read a measuring tape-Must be able to stand on feet for extended periods of time-Ability to lift 55#'s on a regular basis-Pre-employment drug test-Criminal BackgroundEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Temp to Perm
      • $16.90 - $17.00 per hour
      • 6:30 AM - 6:30 PM (Various Shifts Available)
      Spherion Staffing is currently interviewing for 1st shift Production Associates to work with a local manufacturing client. The Production Associate will operate computer automated, high-tech machinery and equipment to produce glass units. Qualified applicants must be able to lift up to 50#'s regularly and have basic computer, math and tape measuring skills.6:30 am to 6:30 pm is 1st shiftPay $17/hour Responsibilities:- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 6:30 AM - 6:30 PM (Various Shifts Available)Skills:Requirements:-High school diploma or GED-Previous production/assembly experience preferred-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basisEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is currently interviewing for 1st shift Production Associates to work with a local manufacturing client. The Production Associate will operate computer automated, high-tech machinery and equipment to produce glass units. Qualified applicants must be able to lift up to 50#'s regularly and have basic computer, math and tape measuring skills.6:30 am to 6:30 pm is 1st shiftPay $17/hour Responsibilities:- Handle and process glass in a safe an efficient manner- Work to meet daily production goals through effective flow of units- Inspect product for quality throughout the process to meet or exceed expectations- Maintain a clean and safe work environmentResponsibilities:See aboveWorking hours: 6:30 AM - 6:30 PM (Various Shifts Available)Skills:Requirements:-High school diploma or GED-Previous production/assembly experience preferred-Basic computer, math and tape measuring skills-Must be able to stand and walk for long periods of time-Ability to lift up to 50 pounds on a regular basisEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/applyIf you have any questions please contact Elijah Jones at 701-412-2901Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • West Fargo, North Dakota
      • Permanent
      • $21.00 - $25.00 per hour
      • Various Shifts Available
      Spherion Staffing is interviewing for Welders to work within a local industrial company. The Welder is responsible for laying out and fabricating structural steel parts such as plates, bulkheads and frames according to job order, verbal instructions and blueprints along with welding structural and miscellaneous steel from drawings and blueprintsDirect Hire OpportunityPay $21-25/hour DOEEvery other week schedule: Wk1- Monday-Thursday 7:30 am to 5 pm, Fri 8-12. Wk2 - 8am - 4:30Responsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-High school diploma or general education degree (GED)-Three years related experience and/or training or equivalent combination of education and experience-Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints and procedure manualsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is interviewing for Welders to work within a local industrial company. The Welder is responsible for laying out and fabricating structural steel parts such as plates, bulkheads and frames according to job order, verbal instructions and blueprints along with welding structural and miscellaneous steel from drawings and blueprintsDirect Hire OpportunityPay $21-25/hour DOEEvery other week schedule: Wk1- Monday-Thursday 7:30 am to 5 pm, Fri 8-12. Wk2 - 8am - 4:30Responsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-High school diploma or general education degree (GED)-Three years related experience and/or training or equivalent combination of education and experience-Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints and procedure manualsEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Temporary
      • $25.00 - $26.00 per hour
      • 2:00 PM - 10:00 PM
      Spherion Staffing has an Electronics Testing Technician position with John Deere in Fargo. This position will perform electrical/ mechanical testing, design validation, and verification of electronic or electro-mechanical equipment and products.Qualified candidates should have an A.S. in Electronics or a two-year technical diploma, and hands-on SMT soldering experience2nd shift 2 pm-10 pmPay $25-26/hour DOE All applicants must be legally authorized to work in the U.S. without sponsorshipResponsibilities: - Perform intermediate validation testing on prototypes and existing products- Work with Engineering to understand and apply defined test requirements - Troubleshoot defective lab equipment and provide required maintenance as needed Build intermediate test harnesses, loads, and circuit boards to support product verification as required- Document and maintain records relating to work performed- Inform supervisor of process, test, or design problems and assist in the corrective action- Assemble (mechanical/electrical) fixtures and test setups as required. This will require performing intermediate design functions- Perform inspection, test, and failure analysis as necessary to determine cause of defective tests or assemblies- Conduct functional test of electronic circuits and PCBs according to engineering instructions- Create test documentation when required for prototype products - Design basic engineering test boxesResponsibilities:See aboveWorking hours: 2:00 PM - 10:00 PMSkills:Requirements: -A.S. in Electronics or a two-year technical diploma, equivalent military certification or equivalent experience-Minimum of one year of related experience in electronics, manufacturing, or engineering-Hands-on SMT soldering experience-Must possess effective written and verbal communication skills-Working knowledge of computers, spreadsheets, and word processing-Understanding of manufacturing processes and electronic components-Knowledge of test equipment, e.g., multimeters, oscilloscopes, etc-Understanding of trouble shooting methodologies to identify root cause-Ability to read basic engineering documents-Ability to comprehend product/process component datasheets-Ability to assemble and disassemble products-Looking for candidates that can troubleshoot boards down to the component levelEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Tefehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing has an Electronics Testing Technician position with John Deere in Fargo. This position will perform electrical/ mechanical testing, design validation, and verification of electronic or electro-mechanical equipment and products.Qualified candidates should have an A.S. in Electronics or a two-year technical diploma, and hands-on SMT soldering experience2nd shift 2 pm-10 pmPay $25-26/hour DOE All applicants must be legally authorized to work in the U.S. without sponsorshipResponsibilities: - Perform intermediate validation testing on prototypes and existing products- Work with Engineering to understand and apply defined test requirements - Troubleshoot defective lab equipment and provide required maintenance as needed Build intermediate test harnesses, loads, and circuit boards to support product verification as required- Document and maintain records relating to work performed- Inform supervisor of process, test, or design problems and assist in the corrective action- Assemble (mechanical/electrical) fixtures and test setups as required. This will require performing intermediate design functions- Perform inspection, test, and failure analysis as necessary to determine cause of defective tests or assemblies- Conduct functional test of electronic circuits and PCBs according to engineering instructions- Create test documentation when required for prototype products - Design basic engineering test boxesResponsibilities:See aboveWorking hours: 2:00 PM - 10:00 PMSkills:Requirements: -A.S. in Electronics or a two-year technical diploma, equivalent military certification or equivalent experience-Minimum of one year of related experience in electronics, manufacturing, or engineering-Hands-on SMT soldering experience-Must possess effective written and verbal communication skills-Working knowledge of computers, spreadsheets, and word processing-Understanding of manufacturing processes and electronic components-Knowledge of test equipment, e.g., multimeters, oscilloscopes, etc-Understanding of trouble shooting methodologies to identify root cause-Ability to read basic engineering documents-Ability to comprehend product/process component datasheets-Ability to assemble and disassemble products-Looking for candidates that can troubleshoot boards down to the component levelEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact David Tefehr at 701-412-2886Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Jamestown, North Dakota
      • Permanent
      • $17.00 - $25.00 per hour
      • 7:30 AM - 3:30 PM
      Spherion Staffing is interviewing candidates for the position of Inventory Coordinator in Jamestown, ND. The Inventory Coordinator will ensure the accuracy of inventory balances. This position will manage customer and vendor returns, shop production material adjustments, damaged materials, shipped ticket material cost review, and inventory reconciliations. This position requires high attention to detail, strong communications skills, and accurate reporting skills.This is your opportunity to work with a company whose product is American made and manufactured from start to finish! Monday-Friday 7:30 am-3:30 pmPay $17-25/hour DOEResponsibilities:- Issue or distribute materials, products, and supplies to customers or coworkers based on information from incoming tickets- Verify inventory totals by comparing them to physical counts of stock and investigate discrepancies or adjust errors- Keep records on the use or damage of stock- Assist customers with returns and appropriate product placement- Maintain inventory adjustments for shop material modifications and special orders- Manage vendor returns, tracking, and credits- Track damaged materials, freight claims, and in-house repairsResponsibilities:See aboveWorking hours: 7:30 AM - 3:30 PMSkills:Requirements:-High School Diploma or GED -Prior relevant experience-Forklift certified-Inventory control knowledge-Overhead crane experience-Attention to detailEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Jon Meidinger at 701-250-1111Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is interviewing candidates for the position of Inventory Coordinator in Jamestown, ND. The Inventory Coordinator will ensure the accuracy of inventory balances. This position will manage customer and vendor returns, shop production material adjustments, damaged materials, shipped ticket material cost review, and inventory reconciliations. This position requires high attention to detail, strong communications skills, and accurate reporting skills.This is your opportunity to work with a company whose product is American made and manufactured from start to finish! Monday-Friday 7:30 am-3:30 pmPay $17-25/hour DOEResponsibilities:- Issue or distribute materials, products, and supplies to customers or coworkers based on information from incoming tickets- Verify inventory totals by comparing them to physical counts of stock and investigate discrepancies or adjust errors- Keep records on the use or damage of stock- Assist customers with returns and appropriate product placement- Maintain inventory adjustments for shop material modifications and special orders- Manage vendor returns, tracking, and credits- Track damaged materials, freight claims, and in-house repairsResponsibilities:See aboveWorking hours: 7:30 AM - 3:30 PMSkills:Requirements:-High School Diploma or GED -Prior relevant experience-Forklift certified-Inventory control knowledge-Overhead crane experience-Attention to detailEducation:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Jon Meidinger at 701-250-1111Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Jamestown, North Dakota
      • Permanent
      • $17.00 - $25.00 per hour
      • 7:30 AM - 3:30 PM
      Spherion Staffing is looking for a full-time Machine Operators to work 1st shift for a local company in Jamestown ND. The Machine Operator is responsible for operating equipment throughout the manufacturing process, with all work being completed with varying levels of supervision from the Team Lead. This is your opportunity to work with a company whose product is American made and manufactured from start to finish! Pay $17-25/hour DOEMonday-Friday 7:30 am-3:30 pmResponsibilities:- Operate manufacturing equipment safely- Demonstrate competency on routine, repetitive tasks- Learn machine capacities- Participate in routine maintenance procedures- Exhibit a working knowledge of material identification- Responsible for the proper use and care of tools and equipment- Practice and promote Safety and Housekeeping- Prompt and dependable attendance- Others duties as assignedResponsibilities:See aboveWorking hours: 7:30 AM - 3:30 PMSkills:Requirements:-High School diploma or GED-Forklift certification-Overhead crane experience-Inventory control knowledge-Experience with manufacturing machinery-Ability to read shop drawings-Ability to read a tape measure (imperial and metric)Education:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Jon Meidinger at 701-250-1111Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for a full-time Machine Operators to work 1st shift for a local company in Jamestown ND. The Machine Operator is responsible for operating equipment throughout the manufacturing process, with all work being completed with varying levels of supervision from the Team Lead. This is your opportunity to work with a company whose product is American made and manufactured from start to finish! Pay $17-25/hour DOEMonday-Friday 7:30 am-3:30 pmResponsibilities:- Operate manufacturing equipment safely- Demonstrate competency on routine, repetitive tasks- Learn machine capacities- Participate in routine maintenance procedures- Exhibit a working knowledge of material identification- Responsible for the proper use and care of tools and equipment- Practice and promote Safety and Housekeeping- Prompt and dependable attendance- Others duties as assignedResponsibilities:See aboveWorking hours: 7:30 AM - 3:30 PMSkills:Requirements:-High School diploma or GED-Forklift certification-Overhead crane experience-Inventory control knowledge-Experience with manufacturing machinery-Ability to read shop drawings-Ability to read a tape measure (imperial and metric)Education:High SchoolExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Jon Meidinger at 701-250-1111Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Jamestown, North Dakota
      • Permanent
      • $20.00 - $25.00 per hour
      • 7:30 AM - 3:30 PM
      Spherion Staffing is looking for experienced Welders to work with a client in Jamestown ND. In this role, the welder will perform a wide variety of welding, cutting, finish and tack welding. This is your opportunity to work with a company whose product is American made and manufactured from start to finish! Pay $20-25/hour DOEMonday-Friday 7:30 am-3:30 pmResponsibilities:- Read and interpret blueprints or welding process specifications- Know weld symbols - Operate manual or semi-automatic welding equipment to fuse metal segments using processes with Tack and Finish welding skills- Operate manual or semi-automatic flame-cutting equipment- Assist with the maintenance and repair of welding equipment- Adjust welding machine and tooling according to work specifications- Perform such other duties as the supervisor may deem necessaryResponsibilities:See aboveWorking hours: 7:30 AM - 3:30 PMSkills:Requirements:-Tack welding experience -Finish welding experience-Welding certifications-Ability to read shop drawings-Knowledgeable and ability to install and use consumablesEducation:TradeExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Jon Meidinger at 701-250-1111Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for experienced Welders to work with a client in Jamestown ND. In this role, the welder will perform a wide variety of welding, cutting, finish and tack welding. This is your opportunity to work with a company whose product is American made and manufactured from start to finish! Pay $20-25/hour DOEMonday-Friday 7:30 am-3:30 pmResponsibilities:- Read and interpret blueprints or welding process specifications- Know weld symbols - Operate manual or semi-automatic welding equipment to fuse metal segments using processes with Tack and Finish welding skills- Operate manual or semi-automatic flame-cutting equipment- Assist with the maintenance and repair of welding equipment- Adjust welding machine and tooling according to work specifications- Perform such other duties as the supervisor may deem necessaryResponsibilities:See aboveWorking hours: 7:30 AM - 3:30 PMSkills:Requirements:-Tack welding experience -Finish welding experience-Welding certifications-Ability to read shop drawings-Knowledgeable and ability to install and use consumablesEducation:TradeExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Jon Meidinger at 701-250-1111Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    Explore over 18 jobs in North Dakota

    It looks like you want to switch your language. This will reset your filters on your current job search.