Spherion Staffing is looking for a Detailed Assembler to work for a local company in Sioux Falls. These qualified candidates will be responsible for completing the assembly emergency vehicles, accessories and finishing touches. Pay: $17-19/hour DOE Hours: Monday - Friday 6 am - 4:30 pm Responsibilities:-Assemble finishing touches on projects before final inspection-Self-check work and inspect prior processes-Meet production goals-Removal of sharp edges of parts -Operate various equipment or tools -Other duties as assignedResponsibilities:See AboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-HS Diploma or GED-Basic computer skills-Ability to wire electrical connections-Basic math skills-Ability to read, understand and perform printed and verbal work instructions throughout all processesEducation:High SchoolExperience:0-1 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for a Detailed Assembler to work for a local company in Sioux Falls. These qualified candidates will be responsible for completing the assembly emergency vehicles, accessories and finishing touches. Pay: $17-19/hour DOE Hours: Monday - Friday 6 am - 4:30 pm Responsibilities:-Assemble finishing touches on projects before final inspection-Self-check work and inspect prior processes-Meet production goals-Removal of sharp edges of parts -Operate various equipment or tools -Other duties as assignedResponsibilities:See AboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-HS Diploma or GED-Basic computer skills-Ability to wire electrical connections-Basic math skills-Ability to read, understand and perform printed and verbal work instructions throughout all processesEducation:High SchoolExperience:0-1 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Paint Technicians. The Paint Technician is responsible for mixing, matching, and applying paint to cabinets, doors, or panels, completing touchups, and coordinating large painting projects .DIRECT HIRE OPPORTUNITY Pay $19-20.00/hour Schedule: Mon-Thurs, 7am-5:30pm plus mandatory Friday overtime from 7am-3pmResponsibilities:-Apply coatings, such as paint, glaze or lacquer to protect projects-Use of spray guns or brushes-Examine finished surfaces of workspaces-Clean and maintain tools and equipment-Place coated work pieces in ovens or dryers -Select and mix ingredients to prepare coating -Conceal blemishes in work pieces such as nicks and dentsResponsibilities:See AboveWorking hours: 7:00 AM - 5:30 PMSkills:Requirements:-High School diploma or GED-Minimum 6 months experience -Ability to lift 50 pounds consistently and up to 100 pounds frequently-Working with hand tools-Possess good hand-eye coordinationEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered please apply online at www.spherion.com/siouxfalls or call Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Paint Technicians. The Paint Technician is responsible for mixing, matching, and applying paint to cabinets, doors, or panels, completing touchups, and coordinating large painting projects .DIRECT HIRE OPPORTUNITY Pay $19-20.00/hour Schedule: Mon-Thurs, 7am-5:30pm plus mandatory Friday overtime from 7am-3pmResponsibilities:-Apply coatings, such as paint, glaze or lacquer to protect projects-Use of spray guns or brushes-Examine finished surfaces of workspaces-Clean and maintain tools and equipment-Place coated work pieces in ovens or dryers -Select and mix ingredients to prepare coating -Conceal blemishes in work pieces such as nicks and dentsResponsibilities:See AboveWorking hours: 7:00 AM - 5:30 PMSkills:Requirements:-High School diploma or GED-Minimum 6 months experience -Ability to lift 50 pounds consistently and up to 100 pounds frequently-Working with hand tools-Possess good hand-eye coordinationEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered please apply online at www.spherion.com/siouxfalls or call Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Production Associates interested in working rotating shifts working 3 days on and 4 days off. Qualified applicants will provide a variety of repetitive production tasks operating various machines. The machinery can include benders, roll formers, wrappers, slitters, shears, and other machines as assigned.Pay: $20/hour Responsibilities:-Complete all quality checks as documented-Complete all daily orders in assigned area-Meet or exceed goals including safety, productivity, scrap, on-time delivery and accuracy-Perform daily operator preventive maintenance checks, as assigned-Report all machinery issues to Maintenance promptly-Clean and reset work area at the end of each shift-Accurately update all records and visual tracking, whether written or electronic-Cross-train as directed and be willing to work at any production position in the plant, on an as needed basis-Participate in monthly inventoryResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School diploma or GED-Must be willing to cross-train in at least two additional work tasks-Ability to read a tape measure, do basic mathematical calculations and use a calculator-Ability to stand for long periods of time and to lift 75 pounds-Ability to work while being exposed to outside weather conditions; extreme cold and extreme heat-Should be proficient in Microsoft Word and Excel-Be willing to work various shiftsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Production Associates interested in working rotating shifts working 3 days on and 4 days off. Qualified applicants will provide a variety of repetitive production tasks operating various machines. The machinery can include benders, roll formers, wrappers, slitters, shears, and other machines as assigned.Pay: $20/hour Responsibilities:-Complete all quality checks as documented-Complete all daily orders in assigned area-Meet or exceed goals including safety, productivity, scrap, on-time delivery and accuracy-Perform daily operator preventive maintenance checks, as assigned-Report all machinery issues to Maintenance promptly-Clean and reset work area at the end of each shift-Accurately update all records and visual tracking, whether written or electronic-Cross-train as directed and be willing to work at any production position in the plant, on an as needed basis-Participate in monthly inventoryResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School diploma or GED-Must be willing to cross-train in at least two additional work tasks-Ability to read a tape measure, do basic mathematical calculations and use a calculator-Ability to stand for long periods of time and to lift 75 pounds-Ability to work while being exposed to outside weather conditions; extreme cold and extreme heat-Should be proficient in Microsoft Word and Excel-Be willing to work various shiftsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Production Associates interested in working rotating shifts working 3 days on and 4 days off. Qualified applicants will provide a variety of repetitive production tasks operating various machines. The machinery can include benders, roll formers, wrappers, slitters, shears, and other machines as assigned.Pay: $20/hour Responsibilities:-Complete all quality checks as documented-Complete all daily orders in assigned area-Meet or exceed goals including safety, productivity, scrap, on-time delivery and accuracy-Perform daily operator preventive maintenance checks, as assigned-Report all machinery issues to Maintenance promptly-Clean and reset work area at the end of each shift-Accurately update all records and visual tracking, whether written or electronic-Cross-train as directed and be willing to work at any production position in the plant, on an as needed basis-Participate in monthly inventoryResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School diploma or GED-Must be willing to cross-train in at least two additional work tasks-Ability to read a tape measure, do basic mathematical calculations and use a calculator-Ability to stand for long periods of time and to lift 75 pounds-Ability to work while being exposed to outside weather conditions; extreme cold and extreme heat-Should be proficient in Microsoft Word and Excel-Be willing to work various shiftsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Production Associates interested in working rotating shifts working 3 days on and 4 days off. Qualified applicants will provide a variety of repetitive production tasks operating various machines. The machinery can include benders, roll formers, wrappers, slitters, shears, and other machines as assigned.Pay: $20/hour Responsibilities:-Complete all quality checks as documented-Complete all daily orders in assigned area-Meet or exceed goals including safety, productivity, scrap, on-time delivery and accuracy-Perform daily operator preventive maintenance checks, as assigned-Report all machinery issues to Maintenance promptly-Clean and reset work area at the end of each shift-Accurately update all records and visual tracking, whether written or electronic-Cross-train as directed and be willing to work at any production position in the plant, on an as needed basis-Participate in monthly inventoryResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School diploma or GED-Must be willing to cross-train in at least two additional work tasks-Ability to read a tape measure, do basic mathematical calculations and use a calculator-Ability to stand for long periods of time and to lift 75 pounds-Ability to work while being exposed to outside weather conditions; extreme cold and extreme heat-Should be proficient in Microsoft Word and Excel-Be willing to work various shiftsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for a CNC Machinist to work with a client in the Brookings, SD area. The CNC Machinist will operate CNC machines to safely produce parts that meet company objectives for safety, quality and productivity while machining centers to fabricate metallic and nonmetallic parts. Qualified applicants should have a 1-2 year certificate from college or a technical school along with 1-2 years related experience or training. Direct Hire Opportunity$15-20/ hour DOEMonday - Friday 8 am- 5 pm Responsibilities:-Operate a variety of CNC machines -Set up and operates machine to verify accuracy of machine settings or programmed control data-Operate metal welding equipment to rebuild or fabricate parts-Set up and operates machine on trial run to verify accuracy of machine settings or programmed control data-Verify conformance of finished work piece to specifications-Work cooperatively with Production and Maintenance personnel in troubleshooting manufacturing problems-Participate in ordering supplies and other materials-Manage vendors when outsourced work is required for specific projects-Develop and adhere to project timelines and give periodic reports-Adjust tools and replace as necessary while maintaining a clean, safe work area-Perform daily maintenance of machines-Perform side operations during machine cycle time as required-Other duties as assignedResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Certificate from college or Technical School-1-2 years related Machinist experience-Read and understand CNC programs -Read and understand layouts and blueprints-Perform operations under minimum supervisor and maintain performance levels-Understanding of safety rules and regulationsBenefits: -Paid time off-401K-Tuition reimbursement-Wellness programs-Short / long term disability-Dental -Prescription coverageEducation:TradeExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for a CNC Machinist to work with a client in the Brookings, SD area. The CNC Machinist will operate CNC machines to safely produce parts that meet company objectives for safety, quality and productivity while machining centers to fabricate metallic and nonmetallic parts. Qualified applicants should have a 1-2 year certificate from college or a technical school along with 1-2 years related experience or training. Direct Hire Opportunity$15-20/ hour DOEMonday - Friday 8 am- 5 pm Responsibilities:-Operate a variety of CNC machines -Set up and operates machine to verify accuracy of machine settings or programmed control data-Operate metal welding equipment to rebuild or fabricate parts-Set up and operates machine on trial run to verify accuracy of machine settings or programmed control data-Verify conformance of finished work piece to specifications-Work cooperatively with Production and Maintenance personnel in troubleshooting manufacturing problems-Participate in ordering supplies and other materials-Manage vendors when outsourced work is required for specific projects-Develop and adhere to project timelines and give periodic reports-Adjust tools and replace as necessary while maintaining a clean, safe work area-Perform daily maintenance of machines-Perform side operations during machine cycle time as required-Other duties as assignedResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Certificate from college or Technical School-1-2 years related Machinist experience-Read and understand CNC programs -Read and understand layouts and blueprints-Perform operations under minimum supervisor and maintain performance levels-Understanding of safety rules and regulationsBenefits: -Paid time off-401K-Tuition reimbursement-Wellness programs-Short / long term disability-Dental -Prescription coverageEducation:TradeExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for a Fabricator for a local company here in Sioux Falls. The operator is responsible for the daily setup and operation of fabrication equipment. Qualified applicants must have at least 1 year metal manufacturing experience. Hours: Monday - Friday 8 am- 5 pmPay: $17/hour Responsibilities:-Load, install and correctly set up the proper tools-Ability to read blueprints and shop drawings-Perform assigned work to time standards and quality expectations-Make routine decisions and use problem solving to resolve basic manufacturing issues or seek assistance-Assist other operators on other machines as needed-Report and document basic material, production and quality control issues-Maintain performance log books on assigned area equipment and report any deficiencies-Maintain safe and clean working environment by complying with all safety procedures, rules and regulationsResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-HS Diploma or GED-Minimum 1 year experience in a metal manufacturing environment is preferred-Basic fabrication background required-Competent at basic dimensional measuring and math; as well as the ability to quickly learn the use of precision measurement tools-Ability to read blueprints and shop drawings to assure production is accurate to specificationsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for a Fabricator for a local company here in Sioux Falls. The operator is responsible for the daily setup and operation of fabrication equipment. Qualified applicants must have at least 1 year metal manufacturing experience. Hours: Monday - Friday 8 am- 5 pmPay: $17/hour Responsibilities:-Load, install and correctly set up the proper tools-Ability to read blueprints and shop drawings-Perform assigned work to time standards and quality expectations-Make routine decisions and use problem solving to resolve basic manufacturing issues or seek assistance-Assist other operators on other machines as needed-Report and document basic material, production and quality control issues-Maintain performance log books on assigned area equipment and report any deficiencies-Maintain safe and clean working environment by complying with all safety procedures, rules and regulationsResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-HS Diploma or GED-Minimum 1 year experience in a metal manufacturing environment is preferred-Basic fabrication background required-Competent at basic dimensional measuring and math; as well as the ability to quickly learn the use of precision measurement tools-Ability to read blueprints and shop drawings to assure production is accurate to specificationsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing has several openings for General Assembly associates on 1st shift and 2nd Shift. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in this production environmentQualified applicants should have previous manufacturing or assembly experience and be able to lift up to 40 poundsPay $15.50/hour1st Shift: Monday-Friday 7 am -3 pm2nd Shift: Monday-Friday 3 pm - 11 pmResponsibilities:-Set up, assemble, repair, test and package final and sub-assemblies -Maintain required work quality and output at all work stations and assembly lines-Operate test equipment to ensure product meets all required test specifications, document and report any discrepancies -Monitor daily quality of assemblies and report all problems/discrepancies -May be required to train or direct work of co-workers -Maintain and report inventory accuracy -Maintain housekeeping and organization of the department and work area -May be required to sweep area, haul trash and perform minor maintenance of certain pieces of equipment-Perform other duties as assigned, including shipping/receiving functions, material handler etc.Responsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-Must have a high school diploma or equivalent-Must be able to stand/walk/sit, for up to eight hours-Ability to lift up to 40 lbs-Should have good computer skills -Must have a good understanding of blue prints and operation layouts-Previous manufacturing and/or assembly experienceEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing has several openings for General Assembly associates on 1st shift and 2nd Shift. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in this production environmentQualified applicants should have previous manufacturing or assembly experience and be able to lift up to 40 poundsPay $15.50/hour1st Shift: Monday-Friday 7 am -3 pm2nd Shift: Monday-Friday 3 pm - 11 pmResponsibilities:-Set up, assemble, repair, test and package final and sub-assemblies -Maintain required work quality and output at all work stations and assembly lines-Operate test equipment to ensure product meets all required test specifications, document and report any discrepancies -Monitor daily quality of assemblies and report all problems/discrepancies -May be required to train or direct work of co-workers -Maintain and report inventory accuracy -Maintain housekeeping and organization of the department and work area -May be required to sweep area, haul trash and perform minor maintenance of certain pieces of equipment-Perform other duties as assigned, including shipping/receiving functions, material handler etc.Responsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-Must have a high school diploma or equivalent-Must be able to stand/walk/sit, for up to eight hours-Ability to lift up to 40 lbs-Should have good computer skills -Must have a good understanding of blue prints and operation layouts-Previous manufacturing and/or assembly experienceEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Welders for a manufacturing company located in Madison, SD. This Welder will safely perform welding, weld components with welding equipment to fit and join, fabricate and/or repair heavy and large mechanical products per specifications and in accordance with the production schedule.Hours: 1st Shift 4:50 AM - 3:20 PM (M-H, Friday OT)2nd Shift 3:35 pm - 2:05 AM (M-H, Friday OT)Pay $20/hour Responsibilities:-Weld components with weld equipment as specified by procedures, layout, blueprint, diagrams, work order and oral instruction-Set up, lay out and using fixtures and guides to repair and modify parts-Operate equipment and tools such as forklifts, hoists, slings, grinders etc.-Read and understand blueprints-Performs own set-ups -Perform or assist in other assigned duties as qualifiedResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School Diploma or GED -1 year welding experience is preferred-Welding certification -Ability to use basic hand tools, power tools, tape measure, grinders and saws safely-Must have basic math skills-Perform work safety in accordance with all company safety policies -Must be able to lift up to 50lbsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Welders for a manufacturing company located in Madison, SD. This Welder will safely perform welding, weld components with welding equipment to fit and join, fabricate and/or repair heavy and large mechanical products per specifications and in accordance with the production schedule.Hours: 1st Shift 4:50 AM - 3:20 PM (M-H, Friday OT)2nd Shift 3:35 pm - 2:05 AM (M-H, Friday OT)Pay $20/hour Responsibilities:-Weld components with weld equipment as specified by procedures, layout, blueprint, diagrams, work order and oral instruction-Set up, lay out and using fixtures and guides to repair and modify parts-Operate equipment and tools such as forklifts, hoists, slings, grinders etc.-Read and understand blueprints-Performs own set-ups -Perform or assist in other assigned duties as qualifiedResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School Diploma or GED -1 year welding experience is preferred-Welding certification -Ability to use basic hand tools, power tools, tape measure, grinders and saws safely-Must have basic math skills-Perform work safety in accordance with all company safety policies -Must be able to lift up to 50lbsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Welders for a manufacturing company located in Yankton, SD. This Welder will safely perform welding, weld components with welding equipment to fit and join, fabricate and/or repair heavy and large mechanical products per specifications and in accordance with the production schedule.Hours: 1st Shift 4:50 AM - 3:20 PM (M-H, Friday OT)2nd Shift 3:35 pm - 2:05 AM (M-H, Friday OT)Pay $20/hour Responsibilities:-Weld components with weld equipment as specified by procedures, layout, blueprint, diagrams, work order and oral instruction-Set up, lay out and using fixtures and guides to repair and modify parts-Operate equipment and tools such as forklifts, hoists, slings, grinders etc.-Read and understand blueprints-Performs own set-ups -Perform or assist in other assigned duties as qualifiedResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School Diploma or GED -1 year welding experience is preferred-Welding certification -Ability to use basic hand tools, power tools, tape measure, grinders and saws safely-Must have basic math skills-Perform work safety in accordance with all company safety policies -Must be able to lift up to 50lbsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Welders for a manufacturing company located in Yankton, SD. This Welder will safely perform welding, weld components with welding equipment to fit and join, fabricate and/or repair heavy and large mechanical products per specifications and in accordance with the production schedule.Hours: 1st Shift 4:50 AM - 3:20 PM (M-H, Friday OT)2nd Shift 3:35 pm - 2:05 AM (M-H, Friday OT)Pay $20/hour Responsibilities:-Weld components with weld equipment as specified by procedures, layout, blueprint, diagrams, work order and oral instruction-Set up, lay out and using fixtures and guides to repair and modify parts-Operate equipment and tools such as forklifts, hoists, slings, grinders etc.-Read and understand blueprints-Performs own set-ups -Perform or assist in other assigned duties as qualifiedResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School Diploma or GED -1 year welding experience is preferred-Welding certification -Ability to use basic hand tools, power tools, tape measure, grinders and saws safely-Must have basic math skills-Perform work safety in accordance with all company safety policies -Must be able to lift up to 50lbsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing has several openings for Production Technicians. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in a clean and safe production environment.Responsibilities:Job Duties:Perform work as apparent or assigned. This might include but is not limited to the following activities:Assemble products per specifications and prescribed procedures.Set up and operate machines, processes or equipment. Monitor life of tooling and sharpen toolsPerform inspections, tests and audits on processes, products and components. Diagnose faults, conduct repairs, and utilize appropriate measuring, inspection and test equipment and procedures to assure consistency in parts produced.Insure that all parts meet specifications, finishes and special handling requirements utilizing appropriate documentation.Utilize proper storage, handling and disposal methods of all materials, including hazardous material when applicable.Assist in maintaining department supplies and consumables.Assist in the operation of the waste water treatment system to ensure effluents meet EPA parameters. Assist with the filing of all required EPA reporting.Supports the department and continuous improvement concepts by suggesting changes and improvements.Keep department and machines clean and orderly, and maintain housekeeping requirements.Perform work in a safe manner by following safety rules and insuring that proper safety equipment is used.Troubleshoot, maintain and perform routine maintenance / preventative maintenance on department machines and equipment. Maintain department records per established procedures.Seeks and recommends ways to eliminate potential quality problems, to improve procedures and methods, and to increase productivity using the Quality Management System (policy, procedure, work instructions).Working hours: 6:00 AM - 2:30 PMSkills:see aboveEducation:High SchoolExperience:0-1 yearsQualifications:Qualifications:High school diploma or GED.Physical ability to lift, carry and maneuver 65 pounds. Physical ability to stand all day.Demonstrated ability to read and interpret all applicable blueprints, schematics and diagrams.Demonstrated ability to work in a cooperative and team oriented environment.Demonstrated ability to communicate (verbal/written) effectively with customers, suppliers and other employees. To be considered for this position please call or email Greg Stafford 605-335-6010 or gregorystafford@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing has several openings for Production Technicians. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in a clean and safe production environment.Responsibilities:Job Duties:Perform work as apparent or assigned. This might include but is not limited to the following activities:Assemble products per specifications and prescribed procedures.Set up and operate machines, processes or equipment. Monitor life of tooling and sharpen toolsPerform inspections, tests and audits on processes, products and components. Diagnose faults, conduct repairs, and utilize appropriate measuring, inspection and test equipment and procedures to assure consistency in parts produced.Insure that all parts meet specifications, finishes and special handling requirements utilizing appropriate documentation.Utilize proper storage, handling and disposal methods of all materials, including hazardous material when applicable.Assist in maintaining department supplies and consumables.Assist in the operation of the waste water treatment system to ensure effluents meet EPA parameters. Assist with the filing of all required EPA reporting.Supports the department and continuous improvement concepts by suggesting changes and improvements.Keep department and machines clean and orderly, and maintain housekeeping requirements.Perform work in a safe manner by following safety rules and insuring that proper safety equipment is used.Troubleshoot, maintain and perform routine maintenance / preventative maintenance on department machines and equipment. Maintain department records per established procedures.Seeks and recommends ways to eliminate potential quality problems, to improve procedures and methods, and to increase productivity using the Quality Management System (policy, procedure, work instructions).Working hours: 6:00 AM - 2:30 PMSkills:see aboveEducation:High SchoolExperience:0-1 yearsQualifications:Qualifications:High school diploma or GED.Physical ability to lift, carry and maneuver 65 pounds. Physical ability to stand all day.Demonstrated ability to read and interpret all applicable blueprints, schematics and diagrams.Demonstrated ability to work in a cooperative and team oriented environment.Demonstrated ability to communicate (verbal/written) effectively with customers, suppliers and other employees. To be considered for this position please call or email Greg Stafford 605-335-6010 or gregorystafford@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is assisting our client; a local industrial manufacturing company who is looking for 1st shift experienced Welders. The Welder will perform various types of weld and finishing operations using Mig/Tig welding. Qualified candidates should have at least 2 years' welding experience and be forklift certified.Monday-Friday 7 am-4:30 pmDirect Hire OpportunityPay $20-24/hour DOEResponsibilities:-Use blueprints and drawings to plan layouts and procedures-Set up components for welding according to specifications-Weld components using welding equipment in various positions (vertical, and horizontal)-Completes documentation and reporting when required-Tack/Weld a wide variety of metal parts and products as directed-Inspect parts for accuracy and qualityResponsibilities:See AboveWorking hours: 7:00 AM - 4:30 PMSkills:Requirements:-High school diploma/GED-Minimum of 2 years' welding experience -Experience using a variety of welding equipment and procedures (MIG and TIG for repairs as necessary)-Experience in using electrical or manual tools (grinders, jigs, tape measures, etc.)-Ability to read and interpret technical documents and drawings-Must have a clean, valid driver's license-Must have a forklift licenseEducation:High SchoolExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is assisting our client; a local industrial manufacturing company who is looking for 1st shift experienced Welders. The Welder will perform various types of weld and finishing operations using Mig/Tig welding. Qualified candidates should have at least 2 years' welding experience and be forklift certified.Monday-Friday 7 am-4:30 pmDirect Hire OpportunityPay $20-24/hour DOEResponsibilities:-Use blueprints and drawings to plan layouts and procedures-Set up components for welding according to specifications-Weld components using welding equipment in various positions (vertical, and horizontal)-Completes documentation and reporting when required-Tack/Weld a wide variety of metal parts and products as directed-Inspect parts for accuracy and qualityResponsibilities:See AboveWorking hours: 7:00 AM - 4:30 PMSkills:Requirements:-High school diploma/GED-Minimum of 2 years' welding experience -Experience using a variety of welding equipment and procedures (MIG and TIG for repairs as necessary)-Experience in using electrical or manual tools (grinders, jigs, tape measures, etc.)-Ability to read and interpret technical documents and drawings-Must have a clean, valid driver's license-Must have a forklift licenseEducation:High SchoolExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing has an immediate opening for Assemblers with a company located in Alexandria, SD! Pay: $16/hour Shift: Monday - Thursday 6:30 am - 5:00 pm, overtime may be required Responsibilities:-Checking products against standards and specifications-Follow both written and verbal instructions-Assemble product as required -Read and comprehend instructions-Align material and put together complex units-Keep record of production quantities and time-Report all issues -Prepare and file job work reportsResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -Experience using forklift, pallet jack, material handling equipment -Ability to read and write legibly-Accurately use measuring equipment-Ability to lift up to 50lbs-Should have good computer skills -Hand eye coordination -Must have a good understanding of blue prints and operation layoutsBenefits: -Medical, Dental, Vision Insurance-Retirement account with matched contributions-Paid vacation and sick/ personal leave-Holiday Pay-Attendance bonusesEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing has an immediate opening for Assemblers with a company located in Alexandria, SD! Pay: $16/hour Shift: Monday - Thursday 6:30 am - 5:00 pm, overtime may be required Responsibilities:-Checking products against standards and specifications-Follow both written and verbal instructions-Assemble product as required -Read and comprehend instructions-Align material and put together complex units-Keep record of production quantities and time-Report all issues -Prepare and file job work reportsResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -Experience using forklift, pallet jack, material handling equipment -Ability to read and write legibly-Accurately use measuring equipment-Ability to lift up to 50lbs-Should have good computer skills -Hand eye coordination -Must have a good understanding of blue prints and operation layoutsBenefits: -Medical, Dental, Vision Insurance-Retirement account with matched contributions-Paid vacation and sick/ personal leave-Holiday Pay-Attendance bonusesEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing has an immediate opening for a Machine Operator with a company located in Alexandria, SD! This candidate will operate various machines to assemble and package products. Qualified applicants should have previous manufacturing or assembly experience.Pay $20/hour Hours: Monday - Thursday 6:30 am - 5:00 pm, overtime may be requiredResponsibilities:-Operate production machines and equipment-Meet production standards-Machine set-ups -Measure and align materials accurately-Inspect and evaluate materials-Support other production areas as needed-Maintain a clean work environment-Other duties as assignedResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -Ability to read and write legibly-Accurately use measuring equipment-Ability to lift up to 50lbs-Should have good computer skills -Hand eye coordination -Must have a good understanding of blue prints and operation layoutsBenefits: -Medical, Dental, Vision Insurance-Retirement account with matched contributions-Paid vacation and sick/ personal leave-Holiday Pay-Attendance bonusesEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing has an immediate opening for a Machine Operator with a company located in Alexandria, SD! This candidate will operate various machines to assemble and package products. Qualified applicants should have previous manufacturing or assembly experience.Pay $20/hour Hours: Monday - Thursday 6:30 am - 5:00 pm, overtime may be requiredResponsibilities:-Operate production machines and equipment-Meet production standards-Machine set-ups -Measure and align materials accurately-Inspect and evaluate materials-Support other production areas as needed-Maintain a clean work environment-Other duties as assignedResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -Ability to read and write legibly-Accurately use measuring equipment-Ability to lift up to 50lbs-Should have good computer skills -Hand eye coordination -Must have a good understanding of blue prints and operation layoutsBenefits: -Medical, Dental, Vision Insurance-Retirement account with matched contributions-Paid vacation and sick/ personal leave-Holiday Pay-Attendance bonusesEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for an experienced welder for a company located in Alexandria, SD. Shifts:Monday - Thursday 6:30AM - 5PM, overtime may be requiredPay: $20-25/hour DOE Responsibilities:-Read and understand blueprints-Read and understand weld symbols-MIG & TIG welding experience, preferred-Assist win other areas of fabrication-Cleaning and maintenance duties as required-Other duties as assigned by weld leadResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -1 year experience or schooling -Organized, self- motivated and strong communication skills -Lifting up to 50 pounds-Must have basic math skills-Ability to review designs and drawingsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for an experienced welder for a company located in Alexandria, SD. Shifts:Monday - Thursday 6:30AM - 5PM, overtime may be requiredPay: $20-25/hour DOE Responsibilities:-Read and understand blueprints-Read and understand weld symbols-MIG & TIG welding experience, preferred-Assist win other areas of fabrication-Cleaning and maintenance duties as required-Other duties as assigned by weld leadResponsibilities:See AboveWorking hours: 6:30 AM - 5:00 PMSkills:Requirements:-High School Diploma or GED -1 year experience or schooling -Organized, self- motivated and strong communication skills -Lifting up to 50 pounds-Must have basic math skills-Ability to review designs and drawingsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for 1st & 2nd Shift Assemblers to work with our client, a manufacturing company with locations in both Madison and Yankton. Assemblers will safely perform assembly and assembly repairs.Shifts: 1st Shift 6:00 AM - 3:30 PM (Mon-Fri)2nd Shift 3:40 pm - 2:05 AM (Mon-Fri)Pay: $19/hourResponsibilities:-Plan, evaluate, set up and run needed equipment -Disassemble and repair assemblies-Work from assembly prints and specifications-Perform machine setups-Record data -Assist other team members as needed-Move and position units-Examine materials visually or physically to ensure conformance with established standardsResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-HS Diploma or GED-Must be able to read and receive instructions -Ability to read, understand and perform printed and verbal work instructions throughout all processes-Must be team-oriented individual who understands and supports the team approach to manufacturing-Strong hand eye coordination-Must be able to lift up to 50lbsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for 1st & 2nd Shift Assemblers to work with our client, a manufacturing company with locations in both Madison and Yankton. Assemblers will safely perform assembly and assembly repairs.Shifts: 1st Shift 6:00 AM - 3:30 PM (Mon-Fri)2nd Shift 3:40 pm - 2:05 AM (Mon-Fri)Pay: $19/hourResponsibilities:-Plan, evaluate, set up and run needed equipment -Disassemble and repair assemblies-Work from assembly prints and specifications-Perform machine setups-Record data -Assist other team members as needed-Move and position units-Examine materials visually or physically to ensure conformance with established standardsResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-HS Diploma or GED-Must be able to read and receive instructions -Ability to read, understand and perform printed and verbal work instructions throughout all processes-Must be team-oriented individual who understands and supports the team approach to manufacturing-Strong hand eye coordination-Must be able to lift up to 50lbsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Electrical Assemblers to work for a local company in Sioux Falls. These qualified candidates will be responsible for completing the wiring of emergency vehicles. Pay: $17-19/hour DOEHours: Monday - Friday 6 am-4:30 pmResponsibilities:-Complete wire routing for all electrical needs-Self-check work and inspection processes-Use of hand tools-Assist team members in other departments as neededResponsibilities:See AboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-HS Diploma or GED-Understanding of 12 volt and AC Electrical Systems-Basic computer skills-Ability to wire electrical connections-Ability to read, understand and perform printed and verbal work instructions throughout all processes-Ability to thrive in a fast paced, high volume production environmentEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered please apply online at www.spherion.com/apply or call Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is looking for Electrical Assemblers to work for a local company in Sioux Falls. These qualified candidates will be responsible for completing the wiring of emergency vehicles. Pay: $17-19/hour DOEHours: Monday - Friday 6 am-4:30 pmResponsibilities:-Complete wire routing for all electrical needs-Self-check work and inspection processes-Use of hand tools-Assist team members in other departments as neededResponsibilities:See AboveWorking hours: 6:00 AM - 4:30 PMSkills:Requirements:-HS Diploma or GED-Understanding of 12 volt and AC Electrical Systems-Basic computer skills-Ability to wire electrical connections-Ability to read, understand and perform printed and verbal work instructions throughout all processes-Ability to thrive in a fast paced, high volume production environmentEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered please apply online at www.spherion.com/apply or call Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is searching for Welders-Fabricators-Powder coater and Assembly Techs for a client in Brookings, SD! These position will be responsible for operation of various fabricating machines, welding or Powder Coating and Assembly. Shifts: Days: Mon-Thurs 7am-4:30pm, Friday 7a-11amNights: Mon-Thurs, 4:30pm-3amWeekend: Fri-Sun, 7am-7pmPay: $17-$24.00 /hour+ DOE$2.00 /hour shift differential for night shift$4.00/ hour shift differential for weekendsResponsibilities:-Set up and operate fabricating machines-Read tape measures and calipers-Record and monitor material usage-Maintain a clean and orderly work area-Perform prescribed preventive maintenance on machineResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School Diploma or GED-1 year of manufacturing experience, preferred-Ability to lift 50 pounds -Attention to details -Ability to read and understand blueprintsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing is searching for Welders-Fabricators-Powder coater and Assembly Techs for a client in Brookings, SD! These position will be responsible for operation of various fabricating machines, welding or Powder Coating and Assembly. Shifts: Days: Mon-Thurs 7am-4:30pm, Friday 7a-11amNights: Mon-Thurs, 4:30pm-3amWeekend: Fri-Sun, 7am-7pmPay: $17-$24.00 /hour+ DOE$2.00 /hour shift differential for night shift$4.00/ hour shift differential for weekendsResponsibilities:-Set up and operate fabricating machines-Read tape measures and calipers-Record and monitor material usage-Maintain a clean and orderly work area-Perform prescribed preventive maintenance on machineResponsibilities:See AboveWorking hours: Various Shifts AvailableSkills:Requirements:-High School Diploma or GED-1 year of manufacturing experience, preferred-Ability to lift 50 pounds -Attention to details -Ability to read and understand blueprintsEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing has 1st shift openings for Press Brake Operators with a client in Tea, SD. The Press Brake Operator will produce precision metal parts as specified by the work order, job specifications, and blueprints.The position performs all levels of set-ups, creates simple programs manually or using software, and prepares minor fixture designs for CNC lathes and millsMonday-Thursday 7 am-4:30 pm and Friday 7 am-11 amPay $20-24/hour DOEDirect Hire Opportunity Responsibilities:- Review work order to identify job specifications and required material and parts- Locate, measure, and check quality of material to be fabricated- Set-up, calibrate, and adjust machines and equipment to job specifications- Prepare and organize raw material on pallets to maximize workspace- Operate brake, shear, and press machinery to form raw material into parts according to job specifications and blueprints from work orders- Review completed work to ensure parts meet company and customer quality requirements - Load and unload completed material and parts onto pallets- Track and record rejected parts, time cycles, production levels, and tool control- Perform regular cleaning and maintenance duties on machines, tools, equipment- Deliver cut material and parts to other departments for the next stage in processingResponsibilities:See aboveWorking hours: 7:00 AM - 4:30 PMSkills:Requirements:-High school diploma or equivalent -3 to 5 years of brake press experience -Clean, valid driver's license-Forklift license-Ability to work on multiple tasks at one time in a fast-paced environment-Ability to work independently as well as in a team environmentEducation:High SchoolExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-610-3350Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion Staffing has 1st shift openings for Press Brake Operators with a client in Tea, SD. The Press Brake Operator will produce precision metal parts as specified by the work order, job specifications, and blueprints.The position performs all levels of set-ups, creates simple programs manually or using software, and prepares minor fixture designs for CNC lathes and millsMonday-Thursday 7 am-4:30 pm and Friday 7 am-11 amPay $20-24/hour DOEDirect Hire Opportunity Responsibilities:- Review work order to identify job specifications and required material and parts- Locate, measure, and check quality of material to be fabricated- Set-up, calibrate, and adjust machines and equipment to job specifications- Prepare and organize raw material on pallets to maximize workspace- Operate brake, shear, and press machinery to form raw material into parts according to job specifications and blueprints from work orders- Review completed work to ensure parts meet company and customer quality requirements - Load and unload completed material and parts onto pallets- Track and record rejected parts, time cycles, production levels, and tool control- Perform regular cleaning and maintenance duties on machines, tools, equipment- Deliver cut material and parts to other departments for the next stage in processingResponsibilities:See aboveWorking hours: 7:00 AM - 4:30 PMSkills:Requirements:-High school diploma or equivalent -3 to 5 years of brake press experience -Clean, valid driver's license-Forklift license-Ability to work on multiple tasks at one time in a fast-paced environment-Ability to work independently as well as in a team environmentEducation:High SchoolExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Greg Stafford at 605-610-3350Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.