Thank you for subscribing to your personalized job alerts.

    60 jobs found in new richland, minnesota

    Filter2
    • Industry1
      Working in
      Show 60 jobs
      Clear filter
    • Location1
      Location & range
        Show 60 jobs
        Clear filter
      • Job types
        Job types
        Show 60 jobs
        Clear filter
      • Salary
        Salary
        $
        Show 60 jobs
        Clear filter
      Clear all
        • Albert Lea, Minnesota
        • Permanent
        • $16.25 per hour
        • 3:15 PM - 1:15 AM
        Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).?Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Punching, employing recognized tooling and procedures where tolerances are close.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:15 PM - 1:15 AMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Requires a high degree of experience and trade skill-Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRequires a passing pre-employment screening, including a drug screen DIRECT HIRE with 100% Employee owned Company, voted the best place to work in Albert Lea many times. BENEFITS! BENEFITS! BENEFITS! One of the best Benefits packages around. Apply TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).?Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Punching, employing recognized tooling and procedures where tolerances are close.Assist lower-level operators to develop skills and to produce production parts to spec.Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:15 PM - 1:15 AMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Requires a high degree of experience and trade skill-Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRequires a passing pre-employment screening, including a drug screen DIRECT HIRE with 100% Employee owned Company, voted the best place to work in Albert Lea many times. BENEFITS! BENEFITS! BENEFITS! One of the best Benefits packages around. Apply TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $14.25 per hour
        • 5:00 AM - 2:15 PM
        Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Punching, employing recognized tooling and procedures where tolerances are close.Assist lower-level operators to develop skills and to produce production parts to spec. Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 5:00 AM - 2:15 PMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Requires a high degree of experience and trade skill-Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRequires a passing pre-employment screening, including a drug screen DIRECT HIRE with 100% Employee owned Company voted best place to work many times! . BENEFITS! BENEFITS! BENEFITS! One of the best benefits packages around. APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm.Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).Maintain all lubricants and coolants on the machine that are used in daily operation.Keep work area clean.Punching, employing recognized tooling and procedures where tolerances are close.Assist lower-level operators to develop skills and to produce production parts to spec. Operates all common machine shop equipment and hand tools skillfully.Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.Sets up machines for less skills machine operators.Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 5:00 AM - 2:15 PMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Requires a high degree of experience and trade skill-Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Requires a high school diploma or GEDRequires a passing pre-employment screening, including a drug screen DIRECT HIRE with 100% Employee owned Company voted best place to work many times! . BENEFITS! BENEFITS! BENEFITS! One of the best benefits packages around. APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $16.25 per hour
        • 3:00 PM - 1:15 AM
        Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 3:00 PM - 1:15 AMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Experience is a factory setting-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:-Requires a high school diploma or GED-Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.-Requires passing pre-employment screening, including a drug screen Direct Hire with a 100% owned company voted Best Place to Work many years! Impressive BENEFITS, BENEFITS, BENEFITS Package! One of the best around! APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Familiar with mechanical and electromechanical components.Perform checks for quality of parts and adjust as required.Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 3:00 PM - 1:15 AMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Experience is a factory setting-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:-Requires a high school diploma or GED-Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.-Requires passing pre-employment screening, including a drug screen Direct Hire with a 100% owned company voted Best Place to Work many years! Impressive BENEFITS, BENEFITS, BENEFITS Package! One of the best around! APPLY NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $14.00 per hour
        • 8:00 AM - 4:30 PM
        Move materials, supplies and finished goods on and off trucks to designated places within the facility. Administrative duties for billing, invoices, and records. 90% Forklift indoors and outdoors, large / heavy material, hoist work of unloading steel, and lots of paperwork and some computer.Responsibilities:Responsible for the unloading and loading of trucks, vans, flatbeds, forklift etc.Handling of material and product within the shipping and receiving area and throughout the manufacturing departments as required.Receiving of all incoming shipments of material and merchandise at Lou-Rich Inc. Verifies the accuracy of the shipment against the bill of lading, packing slip, invoices, etc.Reports damaged goods and shortages.Attaches all required tags to the material to ensure proper identification and traceability.Prepare product for shipment.Working hours: 8:00 AM - 4:30 PMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Requires a degree of experience -Requires good administrative skills-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Forklift ExperienceRequires a high school diploma or GEDRequires passing pre-employment screening, including a drug screen *DIRECT HIRE* with a 100% Employee Owned Company! Great Benefits including:Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!$2.00 Shift Premium for 2nd and 3rd Shift ? Best shift premium in our region!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Move materials, supplies and finished goods on and off trucks to designated places within the facility. Administrative duties for billing, invoices, and records. 90% Forklift indoors and outdoors, large / heavy material, hoist work of unloading steel, and lots of paperwork and some computer.Responsibilities:Responsible for the unloading and loading of trucks, vans, flatbeds, forklift etc.Handling of material and product within the shipping and receiving area and throughout the manufacturing departments as required.Receiving of all incoming shipments of material and merchandise at Lou-Rich Inc. Verifies the accuracy of the shipment against the bill of lading, packing slip, invoices, etc.Reports damaged goods and shortages.Attaches all required tags to the material to ensure proper identification and traceability.Prepare product for shipment.Working hours: 8:00 AM - 4:30 PMSkills:-Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments-Requires a degree of experience -Requires good administrative skills-Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:Forklift ExperienceRequires a high school diploma or GEDRequires passing pre-employment screening, including a drug screen *DIRECT HIRE* with a 100% Employee Owned Company! Great Benefits including:Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!$2.00 Shift Premium for 2nd and 3rd Shift ? Best shift premium in our region!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $18.00 per hour
        • 8:00 AM - 4:30 PM
        Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $75,000 - $94,000 per year
        • 8:00 AM - 5:00 PM
        The Senior Controls Engineer is responsible for designing, developing, and maintaining electrical control systems for custom industrial deburring, parts washing, metal finishing machines and panel building equipment. In this position you will work on multiple equipment projects and be responsible for the electrical related aspects of each project, from design to installation and commissioning. We use SolidWorks and SolidWorks Electrical software to model various electrical components, enclosures, panel layouts and wiring schematics as needed for new designs and re-design of existing machines. Our Controls Engineer will work with various customer-submitted industrial equipment specifications as they relate to the electrical portion of the equipment order, write programmable logic controller (PLC) programs along with programs for operator touch screens that are used in the machines, inspect the electrical portion of used equipment that is returned for rebuild, confer with vendors and work with purchasing to specify electrical components needed for projects, and work with customers during equipment build and commissioning. You may have the opportunity to travel (domestically and internationally) in order to troubleshoot and service equipment in the field. The work environment is primarily an office position but does include factory work for commissioning and troubleshooting of equipment. Travel may be required to customer facilities to troubleshoot, program and modify equipment or to assist the customers workers in doing so.Responsibilities: Serve as a mentor to engineering and manufacturing team members assisting them with the design, panel building, PLC configuration and other areas of expertise. Design functional electrical systems to meet customer specifications through the development and testing of various components. Utilizes SolidWorks and other computer aided design techniques to perform design work. Uses SolidWorks Electrical to create and modify electrical schematics. Develop new PLC and HMI programs from scratch as required for equipment built for customer orders. Conduct detailed research of electrical equipment and systems and report findings. Develop various testing methods and properties to confirm the functionality of components and systems. Communicate engineering information with various stakeholders to facilitate successful completion of projects. Performs a variety of engineering calculations using algebraic, trigonometric, and geometric formulas. Use standard product engineering data for the development of product configurations. Inspect equipment installations and observe operations to ensure compliance with design and equipment specifications ensuring all safety standards are met. Participate in experimental manufacture and testing of finished product.Working hours: 8:00 AM - 5:00 PMSkills:-Excellent computer skills to include a working knowledge of Microsoft Office products.-Ability to analyze problems and select proper corrective action. -Excellent written and verbal communications.-Ability to organize tasks and work independently.-Previous experience mentoring preferred.Education:BachelorsExperience:1-4 yearsQualifications: A degree in engineering, electrical engineering technology, design/drafting, controls, or related field. A minimum of 3 years? experience utilizing SolidWorks as a design program. Extensive work experience in programming and troubleshooting of PLC?s (Allen-Bradley, Siemens, and others) and operator touch screens. Previous experience in panel design required, with previous experience with panel building preferred. Experience with three-phase industrial electrical system design and a general working knowledge of industrial machinery is required. Direct H
        The Senior Controls Engineer is responsible for designing, developing, and maintaining electrical control systems for custom industrial deburring, parts washing, metal finishing machines and panel building equipment. In this position you will work on multiple equipment projects and be responsible for the electrical related aspects of each project, from design to installation and commissioning. We use SolidWorks and SolidWorks Electrical software to model various electrical components, enclosures, panel layouts and wiring schematics as needed for new designs and re-design of existing machines. Our Controls Engineer will work with various customer-submitted industrial equipment specifications as they relate to the electrical portion of the equipment order, write programmable logic controller (PLC) programs along with programs for operator touch screens that are used in the machines, inspect the electrical portion of used equipment that is returned for rebuild, confer with vendors and work with purchasing to specify electrical components needed for projects, and work with customers during equipment build and commissioning. You may have the opportunity to travel (domestically and internationally) in order to troubleshoot and service equipment in the field. The work environment is primarily an office position but does include factory work for commissioning and troubleshooting of equipment. Travel may be required to customer facilities to troubleshoot, program and modify equipment or to assist the customers workers in doing so.Responsibilities: Serve as a mentor to engineering and manufacturing team members assisting them with the design, panel building, PLC configuration and other areas of expertise. Design functional electrical systems to meet customer specifications through the development and testing of various components. Utilizes SolidWorks and other computer aided design techniques to perform design work. Uses SolidWorks Electrical to create and modify electrical schematics. Develop new PLC and HMI programs from scratch as required for equipment built for customer orders. Conduct detailed research of electrical equipment and systems and report findings. Develop various testing methods and properties to confirm the functionality of components and systems. Communicate engineering information with various stakeholders to facilitate successful completion of projects. Performs a variety of engineering calculations using algebraic, trigonometric, and geometric formulas. Use standard product engineering data for the development of product configurations. Inspect equipment installations and observe operations to ensure compliance with design and equipment specifications ensuring all safety standards are met. Participate in experimental manufacture and testing of finished product.Working hours: 8:00 AM - 5:00 PMSkills:-Excellent computer skills to include a working knowledge of Microsoft Office products.-Ability to analyze problems and select proper corrective action. -Excellent written and verbal communications.-Ability to organize tasks and work independently.-Previous experience mentoring preferred.Education:BachelorsExperience:1-4 yearsQualifications: A degree in engineering, electrical engineering technology, design/drafting, controls, or related field. A minimum of 3 years? experience utilizing SolidWorks as a design program. Extensive work experience in programming and troubleshooting of PLC?s (Allen-Bradley, Siemens, and others) and operator touch screens. Previous experience in panel design required, with previous experience with panel building preferred. Experience with three-phase industrial electrical system design and a general working knowledge of industrial machinery is required. Direct H
        • Owatonna, Minnesota
        • Temporary
        • $18.50 per hour
        • 6:00 PM - 6:00 AM
        Ensure that quality packaging materials are supplied to palletizing operations and transport finished quality pallets to appropriate area for the warehouse.Responsibilities:1. Keep palletizer magazines full of pallets, top frames, and slip sheets and ensure the quality of all materials. 2. Keep pallets aligned properly and remove jams as needed. 3. Make sure pallet inventory is properly sorted, with defective pallets stored in separate area. 4. Check conditions of forklift and perform basic P.M.'s at start of each shift. 5. Ensure strappers are full of banding material and pallets are flowing smoothly through lower conveying. Preform band tension check once per shift and document results on check sheet. 6. Inspect and transport finished pallets to warehouse, referring any H.F.I.s for proper disposition. 7. Maintain good housekeeping in lower conveying area. 8. Assist in other areas as needed to maintain a smooth flow of cans through the plan.Working hours: 6:00 PM - 6:00 AMSkills:1. Ability to safely operate all forklifts in plant. 2. Know how to fill tanks and do basic inspections of fork truck at shift start up. 3. Knowledge of can sizes, lacquer finishes and pack sizes.Education:High SchoolExperience:0-1 yearsQualifications:1. Able to read and understand pallet tickets and date coeds. 2. Understand dunnage materials specifications, quality packaging requirements and H.F.I. procedures. 3. Working knowledge of palletizing system and lower conveying. 4. Knowledge of safety regulations which apply to work functions. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Ensure that quality packaging materials are supplied to palletizing operations and transport finished quality pallets to appropriate area for the warehouse.Responsibilities:1. Keep palletizer magazines full of pallets, top frames, and slip sheets and ensure the quality of all materials. 2. Keep pallets aligned properly and remove jams as needed. 3. Make sure pallet inventory is properly sorted, with defective pallets stored in separate area. 4. Check conditions of forklift and perform basic P.M.'s at start of each shift. 5. Ensure strappers are full of banding material and pallets are flowing smoothly through lower conveying. Preform band tension check once per shift and document results on check sheet. 6. Inspect and transport finished pallets to warehouse, referring any H.F.I.s for proper disposition. 7. Maintain good housekeeping in lower conveying area. 8. Assist in other areas as needed to maintain a smooth flow of cans through the plan.Working hours: 6:00 PM - 6:00 AMSkills:1. Ability to safely operate all forklifts in plant. 2. Know how to fill tanks and do basic inspections of fork truck at shift start up. 3. Knowledge of can sizes, lacquer finishes and pack sizes.Education:High SchoolExperience:0-1 yearsQualifications:1. Able to read and understand pallet tickets and date coeds. 2. Understand dunnage materials specifications, quality packaging requirements and H.F.I. procedures. 3. Working knowledge of palletizing system and lower conveying. 4. Knowledge of safety regulations which apply to work functions. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Waseca, Minnesota
        • Permanent
        • $22.00 - $26.00 per hour
        • 6:00 AM - 2:30 PM
        Industrial Maintenance TechnicianReports to: Production SupervisorResponsibilities:Position Requirements: oExperience with industrial machinery troubleshooting and repair, in a manufacturing environmentoFamiliar with industrial electrical power system safety, 480V and belowoExperience troubleshooting and installing pneumatics and hydraulicsoExperience documenting maintenance schedules/plans and activitiesoProvide input regarding equipment repair, upgrade, and replacementoPromote culture of safety, efficiency, and teamworkoWorking hours: 6:00 AM - 2:30 PMSkills:Ability to lift 70lbs and regularly lift 50lbso-Ability to work off ladders or scissor liftso-Ability to work in inclement weather and non-climate-controlled areas.o-Ability to work alone or with a team.o-Position is slated for day shift but must have shift flexibilityEducation:No Degree RequiredExperience:1-4 yearsQualifications:Preferred Experience:oExperience in metal fabrication and weldingoExperience troubleshooting industrial PLC and control wiringPassing Drug screen required Direct Hire position with Benefits in a clean, organized AIR CONDITIONED plant! New facility, new machines. Great working environment (no dust-not dirty work). Culture: This is a high-energy company that encourages employee involvement. We take our business seriously and we have fun doing it. Our manufacturing environment is informal, yet professional. Each customer is special, and our employees are our number one asset. If this position description and company culture fit your interests, let us be your, "Last, Best Place to Work."Benefits Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Industrial Maintenance TechnicianReports to: Production SupervisorResponsibilities:Position Requirements: oExperience with industrial machinery troubleshooting and repair, in a manufacturing environmentoFamiliar with industrial electrical power system safety, 480V and belowoExperience troubleshooting and installing pneumatics and hydraulicsoExperience documenting maintenance schedules/plans and activitiesoProvide input regarding equipment repair, upgrade, and replacementoPromote culture of safety, efficiency, and teamworkoWorking hours: 6:00 AM - 2:30 PMSkills:Ability to lift 70lbs and regularly lift 50lbso-Ability to work off ladders or scissor liftso-Ability to work in inclement weather and non-climate-controlled areas.o-Ability to work alone or with a team.o-Position is slated for day shift but must have shift flexibilityEducation:No Degree RequiredExperience:1-4 yearsQualifications:Preferred Experience:oExperience in metal fabrication and weldingoExperience troubleshooting industrial PLC and control wiringPassing Drug screen required Direct Hire position with Benefits in a clean, organized AIR CONDITIONED plant! New facility, new machines. Great working environment (no dust-not dirty work). Culture: This is a high-energy company that encourages employee involvement. We take our business seriously and we have fun doing it. Our manufacturing environment is informal, yet professional. Each customer is special, and our employees are our number one asset. If this position description and company culture fit your interests, let us be your, "Last, Best Place to Work."Benefits Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $16.50 per hour
        • 6:00 AM - 4:30 PM
        Performs assembly of mechanical and electromechanical component parts and or/upholstered partsResponsibilities:Assembles various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.Analyzes rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.Maintains a safe and clean working environment.Perform other duties as assigned.Working hours: 6:00 AM - 4:30 PMSkills:Mechanical aptitudeUnderstanding of safetyEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentPrevious experience in manufacturing environment Ability to read blueprintsExperience with hand toolsRequires lifting of 50 lbs. occasionally. Will also involve repetitive motion. Work area can be noisy. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Performs assembly of mechanical and electromechanical component parts and or/upholstered partsResponsibilities:Assembles various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.Analyzes rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.Maintains a safe and clean working environment.Perform other duties as assigned.Working hours: 6:00 AM - 4:30 PMSkills:Mechanical aptitudeUnderstanding of safetyEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentPrevious experience in manufacturing environment Ability to read blueprintsExperience with hand toolsRequires lifting of 50 lbs. occasionally. Will also involve repetitive motion. Work area can be noisy. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $15.00 per hour
        • 6:00 AM - 2:30 PM
        POSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:ESSENTIAL FUNCTIONS:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PMSkills:REQUIRED KNOWLEDGE/SKILLS: 1.-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.-End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8? hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:No Degree RequiredExperience:0-1 yearsQualifications:PHYSICAL DEMANDS: 1. Ability to ? Lift and carry up to 8.5lbs from floor to 60 inches-frequently? Stand, twist, bend and rotate ? continuously, Apply now if interested!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        POSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:ESSENTIAL FUNCTIONS:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.Working hours: 6:00 AM - 2:30 PMSkills:REQUIRED KNOWLEDGE/SKILLS: 1.-Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.-Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.-End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8? hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday.Education:No Degree RequiredExperience:0-1 yearsQualifications:PHYSICAL DEMANDS: 1. Ability to ? Lift and carry up to 8.5lbs from floor to 60 inches-frequently? Stand, twist, bend and rotate ? continuously, Apply now if interested!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $16.00 per hour
        • 6:00 PM - 6:00 AM
        To safely operate the palletizing machinery ensuring that only quality finished cans are properly loaded and packaged on pallets for shipment to the customer.Responsibilities:Reporting directly to the Team Leader, the Palletizer Operator responsibilities would include, but not be limited to, the following: ???Manages machinery set-up and adjustment and inspects products to ensure compliance to standards???Operate the controls of the palletizing machine so that the proper configuration of cans, slip sheets and top frames are loaded onto each pallet, making sure each pallet has the proper pallet ticket attached.???Stand up tipped cans, replace voids and remove jams to maintain standard production.???Visually examine cans for defects and discard as appropriate. Monitor larger patterns to see if pallet is properly packed and replace missing cans.???Visually examine pallets, top frames and slip-sheets and remove if defective.???Check drops and conveyor system when flow is stopped and clear minor jams as necessary.???Report equipment malfunctions or can quality issues to the Team Leader or Back End Maintainer.???Maintain cleanliness of work area and follow safe working procedures. Report unsafe conditions immediately to the Team Leader.???Maintain proper production ticket printing records.???Complete all required process control checks as specified.???Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, comply with lock out/tag out, etc???Change out a roll of strapping when coil runs out???Operate and clear jams on the strappers ???Operate all controls and switches on lower conveying???Troubleshoot and correct problems in the palletizing process???Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements--High School Education/GED --Able to read and understand date codes and pallet tickets, know how to operate computer to generate pallet tickets and the procedures for application.--Know and understand overall can quality requirements and be capable for identifying defects..--Know the quality requirements of dunnage (pallets, slip sheets, top frames).--Basic knowledge of entire can-making process.--Basic data entry skillsEducation:High SchoolExperience:0-1 yearsQualifications:Preferred Requirements???Packaging industry experience???Knowledge of Six Sigma, SPC, and Lean Manufacturing Competencies???Strong problem solving skills through an individual and/or collaborative approach???Ability to work independently or with a team???Must be able to look at new solutions and ???think outside the box???Physical Requirements???While performing the duties of this job, the Team Member is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl. ???The Team Member may lift and/or move up to 10 pounds. ???Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Apply now if interested!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        To safely operate the palletizing machinery ensuring that only quality finished cans are properly loaded and packaged on pallets for shipment to the customer.Responsibilities:Reporting directly to the Team Leader, the Palletizer Operator responsibilities would include, but not be limited to, the following: ???Manages machinery set-up and adjustment and inspects products to ensure compliance to standards???Operate the controls of the palletizing machine so that the proper configuration of cans, slip sheets and top frames are loaded onto each pallet, making sure each pallet has the proper pallet ticket attached.???Stand up tipped cans, replace voids and remove jams to maintain standard production.???Visually examine cans for defects and discard as appropriate. Monitor larger patterns to see if pallet is properly packed and replace missing cans.???Visually examine pallets, top frames and slip-sheets and remove if defective.???Check drops and conveyor system when flow is stopped and clear minor jams as necessary.???Report equipment malfunctions or can quality issues to the Team Leader or Back End Maintainer.???Maintain cleanliness of work area and follow safe working procedures. Report unsafe conditions immediately to the Team Leader.???Maintain proper production ticket printing records.???Complete all required process control checks as specified.???Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, comply with lock out/tag out, etc???Change out a roll of strapping when coil runs out???Operate and clear jams on the strappers ???Operate all controls and switches on lower conveying???Troubleshoot and correct problems in the palletizing process???Performs other job-related duties as required or assignedWorking hours: 6:00 PM - 6:00 AMSkills:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements--High School Education/GED --Able to read and understand date codes and pallet tickets, know how to operate computer to generate pallet tickets and the procedures for application.--Know and understand overall can quality requirements and be capable for identifying defects..--Know the quality requirements of dunnage (pallets, slip sheets, top frames).--Basic knowledge of entire can-making process.--Basic data entry skillsEducation:High SchoolExperience:0-1 yearsQualifications:Preferred Requirements???Packaging industry experience???Knowledge of Six Sigma, SPC, and Lean Manufacturing Competencies???Strong problem solving skills through an individual and/or collaborative approach???Ability to work independently or with a team???Must be able to look at new solutions and ???think outside the box???Physical Requirements???While performing the duties of this job, the Team Member is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl. ???The Team Member may lift and/or move up to 10 pounds. ???Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Apply now if interested!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $14.00 per hour
        • 6:00 AM - 2:30 PM
        Packaging materials returned to us by our customers; may be pallets, cardboard slip sheets, and/or top framesResponsibilities:1.Sorting of cardboard slip sheets that are returned by customers. Sheets must be in good condition to be put back into production. Training aids are available to define a good sheet versus a bad sheet. Examples of bad sheets would be damaged, ripped, stained, and/or contaminated. Any old production tickets would also have to be removed and discarded.2.Sheets that are deemed fit for production are to be stacked neatly in the designated area. The bin for stacking sheets also shows the maximum height of the stack.3.Sheets that are not fit for production are to be stacked in a separate pile and will be banded up and sent to the recycler.4.Sorters may also be asked to separate good and bad rectangular plastic top frames. The correct number of frames then needs to be stacked neatly on a pallet for use in production.5.Each person will be required to assist with daily housekeeping duties in the area. All trash and debris must be picked up, trash emptied when necessary, and the floor is to be swept completely.6.Individuals may be required to assist with other miscellaneous tasks in the plant. Generally some type of cleaning duties, but may vary depending on need.Working hours: 6:00 AM - 2:30 PMSkills:Be able to stand or long periods of time. Work well with othersEducation:No Degree RequiredExperience:0-1 yearsQualifications:No education required Apply now if interested.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Packaging materials returned to us by our customers; may be pallets, cardboard slip sheets, and/or top framesResponsibilities:1.Sorting of cardboard slip sheets that are returned by customers. Sheets must be in good condition to be put back into production. Training aids are available to define a good sheet versus a bad sheet. Examples of bad sheets would be damaged, ripped, stained, and/or contaminated. Any old production tickets would also have to be removed and discarded.2.Sheets that are deemed fit for production are to be stacked neatly in the designated area. The bin for stacking sheets also shows the maximum height of the stack.3.Sheets that are not fit for production are to be stacked in a separate pile and will be banded up and sent to the recycler.4.Sorters may also be asked to separate good and bad rectangular plastic top frames. The correct number of frames then needs to be stacked neatly on a pallet for use in production.5.Each person will be required to assist with daily housekeeping duties in the area. All trash and debris must be picked up, trash emptied when necessary, and the floor is to be swept completely.6.Individuals may be required to assist with other miscellaneous tasks in the plant. Generally some type of cleaning duties, but may vary depending on need.Working hours: 6:00 AM - 2:30 PMSkills:Be able to stand or long periods of time. Work well with othersEducation:No Degree RequiredExperience:0-1 yearsQualifications:No education required Apply now if interested.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $14.00 per hour
        • 6:00 AM - 2:30 PM
        The Lacquer Spray Machine (L.S.M.) Cleaners are in charge of maintaining the cleanliness of the machines.Responsibilities:Daily machine cleaning: All 12 machines to be done daily. Each machine should take approximately 20 min. All required personal protective equipment to be worn at all times.1.Shut machine down and apply the correct lockout/tagout on both electrical disconnects.2.Remove dirty cardboard chutes and dispose of properly.3.Using a putty knife, scrape off all excess lacquer from the front of the turrets and other main areas of the machine. More specific instructions given during training.4.Using paper towels, wipe down the remaining areas of the turrets, spray gun nozzles, and all other areas as needed.5.Install new cardboard chutes.6.Apply a thin film of the appropriate grease to all areas as directed in training.7.May be required to assist with other miscellaneous tasks in the plant. Generally some type of cleaning duties, but may vary depending on need.Working hours: 6:00 AM - 2:30 PMSkills:Good time management skills Work well with others MotivatedEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma SAFETY:Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The Lacquer Spray Machine (L.S.M.) Cleaners are in charge of maintaining the cleanliness of the machines.Responsibilities:Daily machine cleaning: All 12 machines to be done daily. Each machine should take approximately 20 min. All required personal protective equipment to be worn at all times.1.Shut machine down and apply the correct lockout/tagout on both electrical disconnects.2.Remove dirty cardboard chutes and dispose of properly.3.Using a putty knife, scrape off all excess lacquer from the front of the turrets and other main areas of the machine. More specific instructions given during training.4.Using paper towels, wipe down the remaining areas of the turrets, spray gun nozzles, and all other areas as needed.5.Install new cardboard chutes.6.Apply a thin film of the appropriate grease to all areas as directed in training.7.May be required to assist with other miscellaneous tasks in the plant. Generally some type of cleaning duties, but may vary depending on need.Working hours: 6:00 AM - 2:30 PMSkills:Good time management skills Work well with others MotivatedEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma SAFETY:Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $15.50 per hour
        • 2:30 PM - 11:00 PM
        POSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:ESSENTIAL FUNCTIONS:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.REQUIRED KNOWLEDGE/SKILLS: 1.Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8? hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday. 4.Working hours: 2:30 PM - 11:00 PMSkills:PHYSICAL DEMANDS: 1. Ability to ? Lift and carry up to 8.5lbs from floor to 60 inches-frequently? Stand, twist, bend and rotate ? continuously,Education:No Degree RequiredExperience:0-1 yearsQualifications:0-1 Year experience Contact us if interested.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        POSITION PURPOSE: To safely ensure that all end center production meets customer process specifications and is properly packaged and palletized for shipment.SAFETY: Maintain a safety awareness attitude in daily performance of their assigned task and to be alert to the safety of fellow employees. Items include, but not limited to maintaining proper utilization of all required personal protective equipment, safely operating forklift (if assigned), comply with safety directives, job safety analysis (JSA?s), etc.Responsibilities:ESSENTIAL FUNCTIONS:1.Operate end center packaging station and assemble finished product on pallets. 2.Perform visual checks of finished ends to ensure entire process is in compliance and take appropriate measures to correct the process when deficiencies are found. Report the defect to shift maintainer.3.Maintain sufficient supply of sleeves and materials for End Center production needs, including restocking bag trays and marking tops with correct identification, sorting and stacking of pallets and changing shrink wrap.4.Complete required quality checks to ensure process is within specification and enter data into the computer. Perform visual checks of finished lids to ensure entire process is in compliance.5.Complete required paperwork and documentation such as process check sheets, log books, and ESE and maintenance check sheets.6.Ensure that End Center finished product is properly cured, wrapped and stored and perform quality checks as required.7.Check conditions of forklift and perform pre-operating checks as required (if assigned).8.Maintain cleanliness of all work areas and follow all safety procedures and work practices.9.Assist in other production areas as needed to maintain a smooth flow of cans and ends through the plant.REQUIRED KNOWLEDGE/SKILLS: 1.Ability to operate end line bagging stations which package finished can ends into bags and to prepare pallets of ends for delivery.2.Ability to complete required quality and visual checks to insure process is within specifications and to enter data and complete documentation as needed.3.End Line Operators assigned to the end line will work one of three possible shifts: first, second, or third. Shifts are 8? hours/day and include a 30 minute unpaid lunch and 2 ten-minute breaks each day, Monday thru Friday. 4.Working hours: 2:30 PM - 11:00 PMSkills:PHYSICAL DEMANDS: 1. Ability to ? Lift and carry up to 8.5lbs from floor to 60 inches-frequently? Stand, twist, bend and rotate ? continuously,Education:No Degree RequiredExperience:0-1 yearsQualifications:0-1 Year experience Contact us if interested.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $16.77 per hour
        • 6:00 AM - 6:00 PM
        POSITION OVERVIEW:To provide operational assistance and relief to Back End personnel, including Palletizer Operator, LSM Operator and Back End Maintainer.Responsibilities:DUTIES AND RESPONSIBILITIES:?Assist in set-up and maintenance and operation of the flangers, beaders, light testers, spray machines, IBO?s and palletizer.?Assist operators with can quality checks.?Operate Palletizer, LSM?s, and Back End equipment in the absence of other Back End Operators & Maintainers.?Perform quality checks in LSM area while LSM Operator performs daily cleaning of LSM machines.?Perform visual checks of cans to ensure entire process is in compliance and take appropriate measure to correct the process when deficiencies are found.?Complete required paperwork and documentation such as process check sheets, logbooks, and maintenance check sheets.?Assist in other areas as needed to maintain a smooth flow of cans through the plant.?Maintain cleanliness of all work areas and follow all safety procedures and work practices ?Performs other job-related duties as required or assignedWorking hours: 6:00 AM - 6:00 PMSkills:QUALIFICATIONS:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements? Basic mechanical skills.? Ability to read, understand and comply with SOP?s.? Basic data entry and computer.? Ability to safely operate production forklift and maintain certification.? Thorough knowledge and understanding of quality can specifications.? Basic understanding of entire can making process.? Knowledge of safety regulations that apply to work functions. ? High School Education/GEDEducation:High SchoolExperience:0-1 yearsQualifications:Preferred Requirements? Competencies? Strong problem solving skills through an individual and/or collaborative approach? Ability to work independently or with a team? Must be able to look at new solutions and ?think outside the box? Physical Requirements:? While performing the duties of this job, the Team Member is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl. ? The Team Member may lift and/or move up to 10 pounds. ? Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus.Working Conditions:? Generally works in a plant environment but may be required to perform some job duties inside a typical office setting. ? While performing the duties of this job, the Team Member may be exposed to moving mechanical parts and vehicular traffic. ? The Team Member may be exposed to a wide range of temperatures. ? The noise level is frequently loud.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        POSITION OVERVIEW:To provide operational assistance and relief to Back End personnel, including Palletizer Operator, LSM Operator and Back End Maintainer.Responsibilities:DUTIES AND RESPONSIBILITIES:?Assist in set-up and maintenance and operation of the flangers, beaders, light testers, spray machines, IBO?s and palletizer.?Assist operators with can quality checks.?Operate Palletizer, LSM?s, and Back End equipment in the absence of other Back End Operators & Maintainers.?Perform quality checks in LSM area while LSM Operator performs daily cleaning of LSM machines.?Perform visual checks of cans to ensure entire process is in compliance and take appropriate measure to correct the process when deficiencies are found.?Complete required paperwork and documentation such as process check sheets, logbooks, and maintenance check sheets.?Assist in other areas as needed to maintain a smooth flow of cans through the plant.?Maintain cleanliness of all work areas and follow all safety procedures and work practices ?Performs other job-related duties as required or assignedWorking hours: 6:00 AM - 6:00 PMSkills:QUALIFICATIONS:In addition to the specific responsibilities listed above, the ideal candidate will possess the following:Minimum Requirements? Basic mechanical skills.? Ability to read, understand and comply with SOP?s.? Basic data entry and computer.? Ability to safely operate production forklift and maintain certification.? Thorough knowledge and understanding of quality can specifications.? Basic understanding of entire can making process.? Knowledge of safety regulations that apply to work functions. ? High School Education/GEDEducation:High SchoolExperience:0-1 yearsQualifications:Preferred Requirements? Competencies? Strong problem solving skills through an individual and/or collaborative approach? Ability to work independently or with a team? Must be able to look at new solutions and ?think outside the box? Physical Requirements:? While performing the duties of this job, the Team Member is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl. ? The Team Member may lift and/or move up to 10 pounds. ? Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus.Working Conditions:? Generally works in a plant environment but may be required to perform some job duties inside a typical office setting. ? While performing the duties of this job, the Team Member may be exposed to moving mechanical parts and vehicular traffic. ? The Team Member may be exposed to a wide range of temperatures. ? The noise level is frequently loud.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Waseca, Minnesota
        • Permanent
        • $18.00 - $20.00 per hour
        • 2:00 PM - 12:00 AM
        Responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly.Responsibilities: o Prepare machines by loading, positioning, and adjusting materials to start a production cycle according to standard operating procedure.o Ensure all safety devices are fully operational and safety procedures are being observed.o Control and adjust machine settings.o Feed raw materials or parts to semi-automated machinery.o Preform quality checks and inspection on finished materials.o Keep records of approved and defective units.o Maintain activity logs.o Remove finished materials from machinery.o Package materials according to job specifications.o Palletize and complete orders.o Maintain work area in neat and orderly condition.o Perform other duties as assigned.? The skill levels required to operate machines vary with the type of machine being operated, the number of machines being operated and the frequency of change-overs on those machines. Different levels of operator skill shall be set-up so that compensation may vary based upon skills and speed required to operate a group of machines successfully. Requirements:o Excellent safety and attendance record.o Basic knowledge in math, addition, subtraction, multiplication, division, and percentages.o Working knowledge of manufacturing equipment and tools.o Possesses basic computer skills.o Effective communication skills.o Ability to work Swift requirements.o Must be able to withstand a variety of environmental conditions such as extremes in temperature and chemical irritants.o Must be able to stand and walk for extended periods of time.o Must be able to continually bend, stoop, crouch, reach above shoulder, use arms, wrists, grasp and squeeze with hands, access constricted spaces, and lift and carry up to 75 lbs.Qualifications: Passing Drug Screen and BackgroundCall to Action: Direct Hire position with Benefits in a clean, organized AIR CONDITIONED plant! New facility, new machines. Great working environment (no dust-not dirty work). Benefits Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Responsibilities:oPrepare machines by loading, positioning, and adjusting materials to start a production cycle according to standard operating procedure.oEnsure all safety devices are fully operational and safety procedures are being observed.oControl and adjust machine settings.oFeed raw materials or parts to semi-automated machinery.oPreform quality checks and inspection on finished materials.oKeep records of approved and defective units.oMaintain activity logs.oRemove finished materials from machinery.oPackage materials according to job specifications.oPalletize and complete orders.oMaintain work area in neat and orderly condition.oPerform other duties as assigned.The skill levels required to operate machines vary with the type of machine being operated, the number of machines being operated and the frequency of change-overs on those machines. Different levels of operator skill shall be set-up so that compensation may vary based upon skills and speed required to operate a group of machines successfully.Working hours: 2:00 PM - 12:00 AMSkills:o-Excellent safety and attendance record.o-Basic knowledge in math, addition, subtraction, multiplication, division, and percentages.o-Working knowledge of manufacturing equipment and tools.o-Possesses basic computer skills.o-Effective communication skills.o-Ability to work Swift requirements.o-Must be able to withstand a variety of environmental conditions such as extremes in temperature and chemical irritants.o-Must be able to stand and walk for extended periods of time.o-Must be able to continually bend, stoop, crouch, reach above shoulder, use arms, wrists, grasp and squeeze with hands, access constricted spaces, and lift and carry up to 75 lbs.Education:No Degree RequiredExperience:0-1 yearsQualifications:Passing Drug Screen and Background Direct Hire position with Benefits in a clean, organized AIR CONDITIONED plant! New facility, new machines. Great working environment (no dust-not dirty work). Benefits Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly.Responsibilities: o Prepare machines by loading, positioning, and adjusting materials to start a production cycle according to standard operating procedure.o Ensure all safety devices are fully operational and safety procedures are being observed.o Control and adjust machine settings.o Feed raw materials or parts to semi-automated machinery.o Preform quality checks and inspection on finished materials.o Keep records of approved and defective units.o Maintain activity logs.o Remove finished materials from machinery.o Package materials according to job specifications.o Palletize and complete orders.o Maintain work area in neat and orderly condition.o Perform other duties as assigned.? The skill levels required to operate machines vary with the type of machine being operated, the number of machines being operated and the frequency of change-overs on those machines. Different levels of operator skill shall be set-up so that compensation may vary based upon skills and speed required to operate a group of machines successfully. Requirements:o Excellent safety and attendance record.o Basic knowledge in math, addition, subtraction, multiplication, division, and percentages.o Working knowledge of manufacturing equipment and tools.o Possesses basic computer skills.o Effective communication skills.o Ability to work Swift requirements.o Must be able to withstand a variety of environmental conditions such as extremes in temperature and chemical irritants.o Must be able to stand and walk for extended periods of time.o Must be able to continually bend, stoop, crouch, reach above shoulder, use arms, wrists, grasp and squeeze with hands, access constricted spaces, and lift and carry up to 75 lbs.Qualifications: Passing Drug Screen and BackgroundCall to Action: Direct Hire position with Benefits in a clean, organized AIR CONDITIONED plant! New facility, new machines. Great working environment (no dust-not dirty work). Benefits Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Responsibilities:oPrepare machines by loading, positioning, and adjusting materials to start a production cycle according to standard operating procedure.oEnsure all safety devices are fully operational and safety procedures are being observed.oControl and adjust machine settings.oFeed raw materials or parts to semi-automated machinery.oPreform quality checks and inspection on finished materials.oKeep records of approved and defective units.oMaintain activity logs.oRemove finished materials from machinery.oPackage materials according to job specifications.oPalletize and complete orders.oMaintain work area in neat and orderly condition.oPerform other duties as assigned.The skill levels required to operate machines vary with the type of machine being operated, the number of machines being operated and the frequency of change-overs on those machines. Different levels of operator skill shall be set-up so that compensation may vary based upon skills and speed required to operate a group of machines successfully.Working hours: 2:00 PM - 12:00 AMSkills:o-Excellent safety and attendance record.o-Basic knowledge in math, addition, subtraction, multiplication, division, and percentages.o-Working knowledge of manufacturing equipment and tools.o-Possesses basic computer skills.o-Effective communication skills.o-Ability to work Swift requirements.o-Must be able to withstand a variety of environmental conditions such as extremes in temperature and chemical irritants.o-Must be able to stand and walk for extended periods of time.o-Must be able to continually bend, stoop, crouch, reach above shoulder, use arms, wrists, grasp and squeeze with hands, access constricted spaces, and lift and carry up to 75 lbs.Education:No Degree RequiredExperience:0-1 yearsQualifications:Passing Drug Screen and Background Direct Hire position with Benefits in a clean, organized AIR CONDITIONED plant! New facility, new machines. Great working environment (no dust-not dirty work). Benefits Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Waseca, Minnesota
        • Permanent
        • $16.00 - $18.00 per hour
        • 6:00 AM - 2:30 PM
        Responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly.Responsibilities:oPrepare machines by loading, positioning, and adjusting materials to start a production cycle according to standard operating procedure.oEnsure all safety devices are fully operational and safety procedures are being observed.oControl and adjust machine settings.oFeed raw materials or parts to semi-automated machinery.oPreform quality checks and inspection on finished materials.oKeep records of approved and defective units.oMaintain activity logs.oRemove finished materials from machinery.oPackage materials according to job specifications.oPalletize and complete orders.oMaintain work area in neat and orderly condition.oPerform other duties as assigned.?The skill levels required to operate machines vary with the type of machine being operated, the number of machines being operated and the frequency of change-overs on those machines. Different levels of operator skill shall be set-up so that compensation may vary based upon skills and speed required to operate a group of machines successfully.Working hours: 6:00 AM - 2:30 PMSkills:o-Excellent safety and attendance record.o-Basic knowledge in math, addition, subtraction, multiplication, division, and percentages.o-Working knowledge of manufacturing equipment and tools.o-Possesses basic computer skills.o-Effective communication skills.o-Ability to work Swift requirements.o-Must be able to withstand a variety of environmental conditions such as extremes in temperature and chemical irritants.o-Must be able to stand and walk for extended periods of time.o-Must be able to continually bend, stoop, crouch, reach above shoulder, use arms, wrists, grasp and squeeze with hands, access constricted spaces, and lift and carry up to 75 lbs.Education:No Degree RequiredExperience:0-1 yearsQualifications:Passing Drug Screen and Background Direct Hire position with Benefits in a clean, organized AIR CONDITIONED plant! New facility, new machines. Great working environment (no dust-not dirty work). Benefits Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Responsible for producing materials by following job specifications, setting up, operating, adjusting, and maintaining machinery to ensure that it functions properly.Responsibilities:oPrepare machines by loading, positioning, and adjusting materials to start a production cycle according to standard operating procedure.oEnsure all safety devices are fully operational and safety procedures are being observed.oControl and adjust machine settings.oFeed raw materials or parts to semi-automated machinery.oPreform quality checks and inspection on finished materials.oKeep records of approved and defective units.oMaintain activity logs.oRemove finished materials from machinery.oPackage materials according to job specifications.oPalletize and complete orders.oMaintain work area in neat and orderly condition.oPerform other duties as assigned.?The skill levels required to operate machines vary with the type of machine being operated, the number of machines being operated and the frequency of change-overs on those machines. Different levels of operator skill shall be set-up so that compensation may vary based upon skills and speed required to operate a group of machines successfully.Working hours: 6:00 AM - 2:30 PMSkills:o-Excellent safety and attendance record.o-Basic knowledge in math, addition, subtraction, multiplication, division, and percentages.o-Working knowledge of manufacturing equipment and tools.o-Possesses basic computer skills.o-Effective communication skills.o-Ability to work Swift requirements.o-Must be able to withstand a variety of environmental conditions such as extremes in temperature and chemical irritants.o-Must be able to stand and walk for extended periods of time.o-Must be able to continually bend, stoop, crouch, reach above shoulder, use arms, wrists, grasp and squeeze with hands, access constricted spaces, and lift and carry up to 75 lbs.Education:No Degree RequiredExperience:0-1 yearsQualifications:Passing Drug Screen and Background Direct Hire position with Benefits in a clean, organized AIR CONDITIONED plant! New facility, new machines. Great working environment (no dust-not dirty work). Benefits Medical Insurance with company contribution, dental, vision, and supplemental life insurance programs availableCompany paid life (short and long term disability) insurancePaid Holidays and paid time off.Company sponsored retirement plan with matching contributions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Temporary
        • $17.80 per hour
        • 10:00 PM - 5:30 AM
        General production workers will be responsible to learn and perform various positions. Employees will rotate to different positions as needed, outlined below.Responsibilities:The following responsibilities are rotated. Clean and de-seed vegetables including peppers, cucumbers, tomatoes, oranges, and onions. Inspect potatoes and fill potato trays/racks. Apply lids on salad containers. Make and load boxes. Label boxes and Salad containers. Palletize boxes. Take sleeved bags of mashed potatoes from conveyor belt and load into boxes. Palletize boxes. Place cabbage on prongs to be cored, and cut remaining core and remove outer leaves.Working hours: 10:00 PM - 5:30 AMSkills:Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must be willing to learn various jobs and duties, because they will be required to rotate to different areas.Education:No Degree RequiredExperience:0-1 yearsQualifications:Must be willing to learn and follow all Food Safety procedures and wear personal protective equipment. Must be able to regularly stand, walk push or pull, talk or hear and use hands to finger, handle, or feel; reach with hands and arms. The employee is occasionally required to sit, climb or balance; stoop, kneel, crouch, or crawl; and push or pull. Able to lift 25-30lbs frequently. Must be able to work in 30-50 degree temperature, with moderate noise level. High school diploma or GED. No prior experience or training is necessary. Want to work for one of Albert Lea's top employers?! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        General production workers will be responsible to learn and perform various positions. Employees will rotate to different positions as needed, outlined below.Responsibilities:The following responsibilities are rotated. Clean and de-seed vegetables including peppers, cucumbers, tomatoes, oranges, and onions. Inspect potatoes and fill potato trays/racks. Apply lids on salad containers. Make and load boxes. Label boxes and Salad containers. Palletize boxes. Take sleeved bags of mashed potatoes from conveyor belt and load into boxes. Palletize boxes. Place cabbage on prongs to be cored, and cut remaining core and remove outer leaves.Working hours: 10:00 PM - 5:30 AMSkills:Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must be willing to learn various jobs and duties, because they will be required to rotate to different areas.Education:No Degree RequiredExperience:0-1 yearsQualifications:Must be willing to learn and follow all Food Safety procedures and wear personal protective equipment. Must be able to regularly stand, walk push or pull, talk or hear and use hands to finger, handle, or feel; reach with hands and arms. The employee is occasionally required to sit, climb or balance; stoop, kneel, crouch, or crawl; and push or pull. Able to lift 25-30lbs frequently. Must be able to work in 30-50 degree temperature, with moderate noise level. High school diploma or GED. No prior experience or training is necessary. Want to work for one of Albert Lea's top employers?! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $15.00 per hour
        • 11:00 PM - 7:30 AM
        Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 11:00 PM - 7:30 AMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $15.00 per hour
        • 3:00 PM - 11:30 PM
        Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:30 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:30 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Temp to Perm
        • $16.00 per hour
        • 5:00 AM - 5:30 PM
        Tends machine that performs packaging operation.Responsibilities:Responsibilities: Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 5:00 AM - 5:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:No Degree RequiredExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $17/hr (Days) & $18.50/hr (Nights), plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Tends machine that performs packaging operation.Responsibilities:Responsibilities: Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 5:00 AM - 5:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:No Degree RequiredExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $17/hr (Days) & $18.50/hr (Nights), plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temp to Perm
        • $15.00 per hour
        • 7:00 AM - 3:30 PM
        This position is accountable for the set-up, assembly and packaging of products.Responsibilities:Prior assembly experience preferredWorking hours: 7:00 AM - 3:30 PMSkills:Ability to operate hand tools, such as arbor presses, tape machines, and bandersAbility to work overtime including weekends, and alter hours as business needs dictateAbility to work effectively as part of a teamAbility to read and interpret blueprints.Ability to read and understand written EnglishAbility to read and interpret process routings, bills of materials, and proceduresEducation:No Degree RequiredExperience:0-1 yearsQualifications:Basic Math skills, including percentages and the ability to count accurately Immediate openings! Apply online or call us at 507-451-3400.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        This position is accountable for the set-up, assembly and packaging of products.Responsibilities:Prior assembly experience preferredWorking hours: 7:00 AM - 3:30 PMSkills:Ability to operate hand tools, such as arbor presses, tape machines, and bandersAbility to work overtime including weekends, and alter hours as business needs dictateAbility to work effectively as part of a teamAbility to read and interpret blueprints.Ability to read and understand written EnglishAbility to read and interpret process routings, bills of materials, and proceduresEducation:No Degree RequiredExperience:0-1 yearsQualifications:Basic Math skills, including percentages and the ability to count accurately Immediate openings! Apply online or call us at 507-451-3400.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $54,080 - $66,560 per year
        • 8:00 AM - 5:00 PM
        The Technician II is primarily responsible for the construction, installation, maintenance, and repair ofelectronic test equipment, test fixtures and cables used for production acceptance testing of commercialand consumer fitness equipment. Production acceptance testing includes board level and final assemblytest equipment. PRIMARY RESPONSIBILITIES? Construct and maintain test equipment at company?s facilities.? Debug, verify, calibrate, and repair test equipment using oscilloscope, DMM, and othermeasurement equipment.? Interface with Test Operators/Line Supervisors on the final assembly manufacturing line regardingtest equipment issues.? Install test equipment for final assembly test equipment on the manufacturing line.? Perform punching, drilling, sawing of metal or plastic plates and cabinets, assembly of mechanicalcomponents and cable harness wiring, labeling, assembly and soldering of printed circuit boards.? Interface with Test Engineers regarding the fabrication, maintenance, and repair of electronic testequipment.? Perform testing of electronic assemblies using computer-controlled automated test equipment.? Collect and evaluate test result data. Set up and perform tests on a variety of electronic equipment.Package and ship test equipmentREQUIREMENTS? Working knowledge of electronic theory, principles, and testing procedures.? Working knowledge with electronic, mechanical, and electromechanical systems.? Ability to read engineering wiring drawings and electrical schematics.? Proficient with hand tools and fabrication equipment.? Proficient with soldering PCB assemblies and fabrication of wire harnesses.? Proficient with electronic assembly troubleshooting skills.? Working knowledge of following written test procedures.? Working knowledge of computer-controlled automated test equipment.? Hands-on instrumentation and data acquisition experience.? Quality oriented with attention to detail in the construction and maintenance of test equipment.? Proficient in using Windows OS and Microsoft Office applications.? Excellent verbal, writing and organizational skills to maintain records, provide data, and supportproblem resolution.? Must be willing to travel for test equipment installs, training, and repair.? Must be able to lift 50 lbs.EXPERIENCE 5 years of related experience Prefer Experience Using Automated Test Applications/SystemsEDUCATION2-year technical degree is preferredResponsibilities:Construct and maintain test equipment at company?s facilities. Debug, verify, calibrate, and repair test equipment using oscilloscope, DMM, and othermeasurement equipment. Interface with Test Operators/Line Supervisors on the final assembly manufacturing line regardingtest equipment issues. Install test equipment for final assembly test equipment on the manufacturing line. Perform punching, drilling, sawing of metal or plastic plates and cabinets, assembly of mechanicalcomponents and cable harness wiring, labeling, assembly and soldering of printed circuit boards. Interface with Test Engineers regarding the fabrication, maintenance, and repair of electronic testequipment. Perform testing of electronic assemblies using computer-controlled automated test equipment. Collect and evaluate test result data. Set up and perform tests on a variety of electronic equipment.Package and ship test equipmentWorking hours: 8:00 AM - 5:00 PMSkills:Working knowledge of electronic theory, principles, and testing procedures. Working knowledge with electronic, mechanical, and electromechanical systems. Ability to read engineering wiring drawings and electrical schematics. Proficient with hand tools and fabrication equipment. Proficient with soldering PCB assemblies and fabrication of wire harnesses. Proficient with electronic assembly troubleshooting skills. Working knowledge of following written test procedures. Working knowledge of computer-controlled automated test equipment. Hands-on instrumentation and data acquisition experience. Quality oriented with attention to detail in the construction and maintenance of test equipment. Proficient in using Windows OS and Microsoft Office applications. Excellent verbal, writing and organizational skills to maintain records, provide data, and supportproblem resolution. Must be willing to travel for test equipment installs, training, and repair. Must be able to lift 50 lbs.Education:TradeExperience:1-4 yearsQualifications:5 years of related experiencePrefer Experience Using Automated Test Applications/Systems2-year technical degree is preferred This is a great opportunity! Apply NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The Technician II is primarily responsible for the construction, installation, maintenance, and repair ofelectronic test equipment, test fixtures and cables used for production acceptance testing of commercialand consumer fitness equipment. Production acceptance testing includes board level and final assemblytest equipment. PRIMARY RESPONSIBILITIES? Construct and maintain test equipment at company?s facilities.? Debug, verify, calibrate, and repair test equipment using oscilloscope, DMM, and othermeasurement equipment.? Interface with Test Operators/Line Supervisors on the final assembly manufacturing line regardingtest equipment issues.? Install test equipment for final assembly test equipment on the manufacturing line.? Perform punching, drilling, sawing of metal or plastic plates and cabinets, assembly of mechanicalcomponents and cable harness wiring, labeling, assembly and soldering of printed circuit boards.? Interface with Test Engineers regarding the fabrication, maintenance, and repair of electronic testequipment.? Perform testing of electronic assemblies using computer-controlled automated test equipment.? Collect and evaluate test result data. Set up and perform tests on a variety of electronic equipment.Package and ship test equipmentREQUIREMENTS? Working knowledge of electronic theory, principles, and testing procedures.? Working knowledge with electronic, mechanical, and electromechanical systems.? Ability to read engineering wiring drawings and electrical schematics.? Proficient with hand tools and fabrication equipment.? Proficient with soldering PCB assemblies and fabrication of wire harnesses.? Proficient with electronic assembly troubleshooting skills.? Working knowledge of following written test procedures.? Working knowledge of computer-controlled automated test equipment.? Hands-on instrumentation and data acquisition experience.? Quality oriented with attention to detail in the construction and maintenance of test equipment.? Proficient in using Windows OS and Microsoft Office applications.? Excellent verbal, writing and organizational skills to maintain records, provide data, and supportproblem resolution.? Must be willing to travel for test equipment installs, training, and repair.? Must be able to lift 50 lbs.EXPERIENCE 5 years of related experience Prefer Experience Using Automated Test Applications/SystemsEDUCATION2-year technical degree is preferredResponsibilities:Construct and maintain test equipment at company?s facilities. Debug, verify, calibrate, and repair test equipment using oscilloscope, DMM, and othermeasurement equipment. Interface with Test Operators/Line Supervisors on the final assembly manufacturing line regardingtest equipment issues. Install test equipment for final assembly test equipment on the manufacturing line. Perform punching, drilling, sawing of metal or plastic plates and cabinets, assembly of mechanicalcomponents and cable harness wiring, labeling, assembly and soldering of printed circuit boards. Interface with Test Engineers regarding the fabrication, maintenance, and repair of electronic testequipment. Perform testing of electronic assemblies using computer-controlled automated test equipment. Collect and evaluate test result data. Set up and perform tests on a variety of electronic equipment.Package and ship test equipmentWorking hours: 8:00 AM - 5:00 PMSkills:Working knowledge of electronic theory, principles, and testing procedures. Working knowledge with electronic, mechanical, and electromechanical systems. Ability to read engineering wiring drawings and electrical schematics. Proficient with hand tools and fabrication equipment. Proficient with soldering PCB assemblies and fabrication of wire harnesses. Proficient with electronic assembly troubleshooting skills. Working knowledge of following written test procedures. Working knowledge of computer-controlled automated test equipment. Hands-on instrumentation and data acquisition experience. Quality oriented with attention to detail in the construction and maintenance of test equipment. Proficient in using Windows OS and Microsoft Office applications. Excellent verbal, writing and organizational skills to maintain records, provide data, and supportproblem resolution. Must be willing to travel for test equipment installs, training, and repair. Must be able to lift 50 lbs.Education:TradeExperience:1-4 yearsQualifications:5 years of related experiencePrefer Experience Using Automated Test Applications/Systems2-year technical degree is preferred This is a great opportunity! Apply NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $16.50 per hour
        • 6:00 AM - 4:25 PM
        ASSEMBLER HOURS ARE MONDAY THROUGH THURSDAY; 6 AM UNTIL 4:30 PM. OVERTIME IS DONE ON FRIDAYS.WE NEED ASSEMBLERS TO WEAR ESD SHOES; IF THEY DONT HAVE ESD, THEN WE HAVE STRIPS FROM OUR TOOL CRIB THEY CAN WEAR.BREAKS ARE 9:00 - 9:10 AM; 11:30 - 12:00 PM; 1:50 - 2:10 PMJob Purpose:Performs assembly of mechanical and electromechanical component parts and or/upholstered partsResponsibilities:Assembles various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.Analyzes rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.Maintains a safe and clean working environment.Perform other duties as assigned.Working hours: 6:00 AM - 4:25 PMSkills:-Mechanical aptitude-Understanding of safetyEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentPrevious experience in manufacturing environment Ability to read blueprintsExperience with hand toolsWorking Conditions:Requires lifting of 50 lbs. occasionally. Will also involve repetitive motion. Work area can be noisy. Get the job you want today, not the job you need later! Apply NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        ASSEMBLER HOURS ARE MONDAY THROUGH THURSDAY; 6 AM UNTIL 4:30 PM. OVERTIME IS DONE ON FRIDAYS.WE NEED ASSEMBLERS TO WEAR ESD SHOES; IF THEY DONT HAVE ESD, THEN WE HAVE STRIPS FROM OUR TOOL CRIB THEY CAN WEAR.BREAKS ARE 9:00 - 9:10 AM; 11:30 - 12:00 PM; 1:50 - 2:10 PMJob Purpose:Performs assembly of mechanical and electromechanical component parts and or/upholstered partsResponsibilities:Assembles various components using hand tools, air tools and measuring equipment ensuring that all specifications are being met to manufacture the highest quality product.Analyzes rejected product, communicating this with the Lead Assembler and assisting in the problem resolution.Uses calibration and testing equipment effectively, ensuring that the product functions according to specifications.Maintains a safe and clean working environment.Perform other duties as assigned.Working hours: 6:00 AM - 4:25 PMSkills:-Mechanical aptitude-Understanding of safetyEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentPrevious experience in manufacturing environment Ability to read blueprintsExperience with hand toolsWorking Conditions:Requires lifting of 50 lbs. occasionally. Will also involve repetitive motion. Work area can be noisy. Get the job you want today, not the job you need later! Apply NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $15.00 per hour
        • 7:00 AM - 3:00 PM
        Assemble finished window hardware products for shipment to customer, according to output plan, while maintaining qualitystandards.Responsibilities:Assemble metal parts: a. May walk to producing area to get pan of parts for assembly and complete necessary paperwork.b. Read order to verify parts are correct. c. Check quality of components before assembling by referring to written standardsfor quality control and/or blueprints. d. Record daily individual or work center production quantity on Production Board and inred book. e. Inspects final assembly by referring to written criteria. f. Assemble boxes for final packing of product.May assist in machine set-up as necessary.Assist in training department personnel with operations and procedures.Meets briefly with following shift to communicate problems, possible solutions and issues requiring attention.May make minor adjustments to machines to keep them in working order.May act as back-up Material Handler, as necessary.May occasionally check and approve work of temporary personnel.May stock parts at work center and stack finished goods on pallet.May perform minor preventive maintenance on machinery.Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Learn to read blueprints, operate assembly equipment and use computer to verify information.Education:High SchoolExperience:0-1 yearsQualifications:Supervision Received - Under regular supervision, only exceptional or unusual tasks are fully checked, normal tasks arespot-checked on a regular basis, generally daily. Assignments are specific, incumbent uses standardized methods tocomplete.Problem solving and Decision Making - Assesses parts to determine if they meet quality standards, if they do not, mayshut down machine and notify Lead.Relations with Others - Interacts with personnel from Assembly area, Plating, Punch Press and Maintenance. Mayparticipate in small group activities such as Quality Circles, task teams, safety meetings and other improvement efforts.Learning Period - The basics of working in the Assembly area can be learned in two to three weeks. To handle all aspectsof the job with minimal supervision requires six to nine months of on-the-job training.Work Environment / Other RequirementsEquipment Operated - Performs mechanical operations using riveters, presses, air vices, semi-automatic assemblymachines, packaging equipment, calculator, various hand tools. Some care is required to recognize trouble and shut downequipment and power hand tools to prevent or minimize damage.Working Conditions and Hazards - General conditions are good, occasional temperature fluctuations as a result ofseasonal changes. Exposure to occasional hazards of machine operation. Uniform safety practices consist of safety shoes,safety glasses and other devices as required.Physical Effort Required - Sitting, standing, walking required. Must be able to lift 40 pounds. Eye-hand coordinationnecessary. Requires repetitive motion. Direct Hire placement with a great company! Apply NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Assemble finished window hardware products for shipment to customer, according to output plan, while maintaining qualitystandards.Responsibilities:Assemble metal parts: a. May walk to producing area to get pan of parts for assembly and complete necessary paperwork.b. Read order to verify parts are correct. c. Check quality of components before assembling by referring to written standardsfor quality control and/or blueprints. d. Record daily individual or work center production quantity on Production Board and inred book. e. Inspects final assembly by referring to written criteria. f. Assemble boxes for final packing of product.May assist in machine set-up as necessary.Assist in training department personnel with operations and procedures.Meets briefly with following shift to communicate problems, possible solutions and issues requiring attention.May make minor adjustments to machines to keep them in working order.May act as back-up Material Handler, as necessary.May occasionally check and approve work of temporary personnel.May stock parts at work center and stack finished goods on pallet.May perform minor preventive maintenance on machinery.Perform other duties as assigned.Working hours: 7:00 AM - 3:00 PMSkills:Learn to read blueprints, operate assembly equipment and use computer to verify information.Education:High SchoolExperience:0-1 yearsQualifications:Supervision Received - Under regular supervision, only exceptional or unusual tasks are fully checked, normal tasks arespot-checked on a regular basis, generally daily. Assignments are specific, incumbent uses standardized methods tocomplete.Problem solving and Decision Making - Assesses parts to determine if they meet quality standards, if they do not, mayshut down machine and notify Lead.Relations with Others - Interacts with personnel from Assembly area, Plating, Punch Press and Maintenance. Mayparticipate in small group activities such as Quality Circles, task teams, safety meetings and other improvement efforts.Learning Period - The basics of working in the Assembly area can be learned in two to three weeks. To handle all aspectsof the job with minimal supervision requires six to nine months of on-the-job training.Work Environment / Other RequirementsEquipment Operated - Performs mechanical operations using riveters, presses, air vices, semi-automatic assemblymachines, packaging equipment, calculator, various hand tools. Some care is required to recognize trouble and shut downequipment and power hand tools to prevent or minimize damage.Working Conditions and Hazards - General conditions are good, occasional temperature fluctuations as a result ofseasonal changes. Exposure to occasional hazards of machine operation. Uniform safety practices consist of safety shoes,safety glasses and other devices as required.Physical Effort Required - Sitting, standing, walking required. Must be able to lift 40 pounds. Eye-hand coordinationnecessary. Requires repetitive motion. Direct Hire placement with a great company! Apply NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $16.00 per hour
        • 3:00 PM - 11:00 PM
        Assemble finished window hardware products for shipment to customer, according to output plan, while maintaining qualitystandards.Responsibilities:Assemble metal parts: a. May walk to producing area to get pan of parts for assembly and complete necessary paperwork.b. Read order to verify parts are correct. c. Check quality of components before assembling by referring to written standardsfor quality control and/or blueprints. d. Record daily individual or work center production quantity on Production Board and inred book. e. Inspects final assembly by referring to written criteria. f. Assemble boxes for final packing of product.May assist in machine set-up as necessary.Assist in training department personnel with operations and procedures.Meets briefly with following shift to communicate problems, possible solutions and issues requiring attention.May make minor adjustments to machines to keep them in working order.May act as back-up Material Handler, as necessary.May occasionally check and approve work of temporary personnel.May stock parts at work center and stack finished goods on pallet.May perform minor preventive maintenance on machinery.Perform other duties as assigned.Working hours: 3:00 PM - 11:00 PMSkills:Learn to read blueprints, operate assembly equipment and use computer to verify information.Education:High SchoolExperience:0-1 yearsQualifications:Supervision Received - Under regular supervision, only exceptional or unusual tasks are fully checked, normal tasks arespot-checked on a regular basis, generally daily. Assignments are specific, incumbent uses standardized methods tocomplete.Problem solving and Decision Making - Assesses parts to determine if they meet quality standards, if they do not, mayshut down machine and notify Lead.Relations with Others - Interacts with personnel from Assembly area, Plating, Punch Press and Maintenance. Mayparticipate in small group activities such as Quality Circles, task teams, safety meetings and other improvement efforts.Learning Period - The basics of working in the Assembly area can be learned in two to three weeks. To handle all aspectsof the job with minimal supervision requires six to nine months of on-the-job training.Work Environment / Other RequirementsEquipment Operated - Performs mechanical operations using riveters, presses, air vices, semi-automatic assemblymachines, packaging equipment, calculator, various hand tools. Some care is required to recognize trouble and shut downequipment and power hand tools to prevent or minimize damage.Working Conditions and Hazards - General conditions are good, occasional temperature fluctuations as a result ofseasonal changes. Exposure to occasional hazards of machine operation. Uniform safety practices consist of safety shoes,safety glasses and other devices as required.Physical Effort Required - Sitting, standing, walking required. Must be able to lift 40 pounds. Eye-hand coordinationnecessary. Requires repetitive motion. Direct Hire position with a great company! Apply NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Assemble finished window hardware products for shipment to customer, according to output plan, while maintaining qualitystandards.Responsibilities:Assemble metal parts: a. May walk to producing area to get pan of parts for assembly and complete necessary paperwork.b. Read order to verify parts are correct. c. Check quality of components before assembling by referring to written standardsfor quality control and/or blueprints. d. Record daily individual or work center production quantity on Production Board and inred book. e. Inspects final assembly by referring to written criteria. f. Assemble boxes for final packing of product.May assist in machine set-up as necessary.Assist in training department personnel with operations and procedures.Meets briefly with following shift to communicate problems, possible solutions and issues requiring attention.May make minor adjustments to machines to keep them in working order.May act as back-up Material Handler, as necessary.May occasionally check and approve work of temporary personnel.May stock parts at work center and stack finished goods on pallet.May perform minor preventive maintenance on machinery.Perform other duties as assigned.Working hours: 3:00 PM - 11:00 PMSkills:Learn to read blueprints, operate assembly equipment and use computer to verify information.Education:High SchoolExperience:0-1 yearsQualifications:Supervision Received - Under regular supervision, only exceptional or unusual tasks are fully checked, normal tasks arespot-checked on a regular basis, generally daily. Assignments are specific, incumbent uses standardized methods tocomplete.Problem solving and Decision Making - Assesses parts to determine if they meet quality standards, if they do not, mayshut down machine and notify Lead.Relations with Others - Interacts with personnel from Assembly area, Plating, Punch Press and Maintenance. Mayparticipate in small group activities such as Quality Circles, task teams, safety meetings and other improvement efforts.Learning Period - The basics of working in the Assembly area can be learned in two to three weeks. To handle all aspectsof the job with minimal supervision requires six to nine months of on-the-job training.Work Environment / Other RequirementsEquipment Operated - Performs mechanical operations using riveters, presses, air vices, semi-automatic assemblymachines, packaging equipment, calculator, various hand tools. Some care is required to recognize trouble and shut downequipment and power hand tools to prevent or minimize damage.Working Conditions and Hazards - General conditions are good, occasional temperature fluctuations as a result ofseasonal changes. Exposure to occasional hazards of machine operation. Uniform safety practices consist of safety shoes,safety glasses and other devices as required.Physical Effort Required - Sitting, standing, walking required. Must be able to lift 40 pounds. Eye-hand coordinationnecessary. Requires repetitive motion. Direct Hire position with a great company! Apply NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $15.00 per hour
        • 7:00 AM - 3:00 PM
        Backup Material Handler (24th) 90% of the duties would be doing the Coating Line Operator (Hanging Parts) position. For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 7:00 AM - 3:00 PMSkills:Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:High SchoolExperience:0-1 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts.Work Environment / Other RequirementsEquipment Operated - Process and quality testing equipment, weigh scales, computer, R&T clocks, various small hand toolsand material movement equipment. Moderate care is required to prevent damage to equipmentWorking Conditions and Hazards - General working conditions are good. Exposed to hazards of machine operation andminimal exposure to fumes from coating operation. Safety equipment required consists of gloves, safety shoes, safetyglasses with side shields, and other PPE safety devices as required. Body jewelry and rings must be post style only. Wearingof rings is not permitted at the Paint Services
        Backup Material Handler (24th) 90% of the duties would be doing the Coating Line Operator (Hanging Parts) position. For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 7:00 AM - 3:00 PMSkills:Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessary.Education:High SchoolExperience:0-1 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from other manufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts.Work Environment / Other RequirementsEquipment Operated - Process and quality testing equipment, weigh scales, computer, R&T clocks, various small hand toolsand material movement equipment. Moderate care is required to prevent damage to equipmentWorking Conditions and Hazards - General working conditions are good. Exposed to hazards of machine operation andminimal exposure to fumes from coating operation. Safety equipment required consists of gloves, safety shoes, safetyglasses with side shields, and other PPE safety devices as required. Body jewelry and rings must be post style only. Wearingof rings is not permitted at the Paint Services
        • Owatonna, Minnesota
        • Permanent
        • $17.00 - $22.00 per hour
        • 7:00 AM - 3:30 PM (Various Shifts Available)
        Come work for a company that is local and cares about its employees - WORK DIRECT FOR THE COMPANY!As a Cabinet Installer you will work with removing existing cabinets, measure each installation area, prepare the surfaces, and install cabinets according to specifications. Maintain a clean workspace and take pride in their finished product. Will use hand and power tools, and travel to each installation location.Full time-Direct Hire positionOvertime payCompetitive compensation based on experiencePaid vacationPaid holidays & sick time401K plan after 6 monthsCabinet installation training is providedPay based on experienceResponsibilities:Cabinet InstallerLoad, deliver and unload custom cabinetsInstallation of closet systemsSet up and clean up, before and after the cabinetry is installedInstall cabinetry: Ensure installation quality is met 100% of the timeUnderstand cabinetry prints for placement within the homeInstall base shoe, crown molding, laminate counter-tops and hardwareWorking hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Understanding of general carpentry preferred Experience with power and hand tools preferredCustomer service skills, able to speak to customersEducation:High SchoolExperience:0-1 yearsQualifications:Valid drivers licenseAbility to stand and/or walk for extended periods of timeAbility to lift or move items weighing up to 100 lbs on a regular basis; will ask for assistance for lifting or moving heavier objectsAble to work overtime when necessary APPLY NOW! GET THE JOB YOU WANT NOW! NOT THE ONE YOU WILL NEED LATER!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Come work for a company that is local and cares about its employees - WORK DIRECT FOR THE COMPANY!As a Cabinet Installer you will work with removing existing cabinets, measure each installation area, prepare the surfaces, and install cabinets according to specifications. Maintain a clean workspace and take pride in their finished product. Will use hand and power tools, and travel to each installation location.Full time-Direct Hire positionOvertime payCompetitive compensation based on experiencePaid vacationPaid holidays & sick time401K plan after 6 monthsCabinet installation training is providedPay based on experienceResponsibilities:Cabinet InstallerLoad, deliver and unload custom cabinetsInstallation of closet systemsSet up and clean up, before and after the cabinetry is installedInstall cabinetry: Ensure installation quality is met 100% of the timeUnderstand cabinetry prints for placement within the homeInstall base shoe, crown molding, laminate counter-tops and hardwareWorking hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Understanding of general carpentry preferred Experience with power and hand tools preferredCustomer service skills, able to speak to customersEducation:High SchoolExperience:0-1 yearsQualifications:Valid drivers licenseAbility to stand and/or walk for extended periods of timeAbility to lift or move items weighing up to 100 lbs on a regular basis; will ask for assistance for lifting or moving heavier objectsAble to work overtime when necessary APPLY NOW! GET THE JOB YOU WANT NOW! NOT THE ONE YOU WILL NEED LATER!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Permanent
        • $18.00 - $22.00 per hour
        • 7:00 AM - 3:30 PM (Various Shifts Available)
        Come work for a company that is local and cares about its employees - WORK DIRECT FOR THE COMPANY!As a Cabinet Builder, you'll be using a combination of traditional woodworking and state-of-the-art tools to complete orders throughout each week. We are seeking highly motivated builders to perform high quality fabrication. Qualified candidates must be able to work individually, and as part of a team, with minimal supervision. They should be dependable, bear excellent attention to detail and can comfortably work with both hand-powered tools (drills, routers, saws, etc.) and large industrial equipment (CNC machine). Reading blue prints and cut lists is preferred, but not a must.Responsibilities:Assemble cabinets efficientlyGlues, fits, and clamps parts together to form a complete cabinet using clamps or clamping machine Sands and scrapes surfaces to prepare cabinet components for finishingMatches materials for color and grain Cut and assemble face frames to be applied to cabinet boxFit out finished cabinets; assemble drawer boxes, installing hinges, drawer slides, etc.Assemble doors and sand them for final finishingHelp in other departments within the shop as needed (i.e. edge banding, taping, cleaning, sand sealing)Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Experience with hand and power toolsAble to operate manufacturing machinesAble to read blue printsAble to multi-taskGood math skillsAble to read and take measurementsVisualization, creativity and attention to detailAble to work as a team and as an individualEducation:High SchoolExperience:1-4 yearsQualifications:Valid drivers licenseAble to understand quality and production standardsTakes direction wellWillingness to learn and understand the companies? production specificationsLarge machinery, CNC, experience preferred, but not a mustMust be able to lift up to 50lbs at a time; help from fellow builders is there when neededMust be able to stand 100% of your dayPrior carpentry experience or custom woodworking skills preferred, but not a mustBenefits IncludedOvertime payCompetitive compensation based on experience, WILL PAY MORE FOR PREVIOUS CABINET BUILDER/MAKER EXPERIENCE, DEPENDS ON SKILL SET. Paid vacationPaid holidays & sick time401K plan after 6 months APPLY NOW! GET THE JOB YOU WANT NOW! NOT THE ONE YOU WILL NEED LATER!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Come work for a company that is local and cares about its employees - WORK DIRECT FOR THE COMPANY!As a Cabinet Builder, you'll be using a combination of traditional woodworking and state-of-the-art tools to complete orders throughout each week. We are seeking highly motivated builders to perform high quality fabrication. Qualified candidates must be able to work individually, and as part of a team, with minimal supervision. They should be dependable, bear excellent attention to detail and can comfortably work with both hand-powered tools (drills, routers, saws, etc.) and large industrial equipment (CNC machine). Reading blue prints and cut lists is preferred, but not a must.Responsibilities:Assemble cabinets efficientlyGlues, fits, and clamps parts together to form a complete cabinet using clamps or clamping machine Sands and scrapes surfaces to prepare cabinet components for finishingMatches materials for color and grain Cut and assemble face frames to be applied to cabinet boxFit out finished cabinets; assemble drawer boxes, installing hinges, drawer slides, etc.Assemble doors and sand them for final finishingHelp in other departments within the shop as needed (i.e. edge banding, taping, cleaning, sand sealing)Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Experience with hand and power toolsAble to operate manufacturing machinesAble to read blue printsAble to multi-taskGood math skillsAble to read and take measurementsVisualization, creativity and attention to detailAble to work as a team and as an individualEducation:High SchoolExperience:1-4 yearsQualifications:Valid drivers licenseAble to understand quality and production standardsTakes direction wellWillingness to learn and understand the companies? production specificationsLarge machinery, CNC, experience preferred, but not a mustMust be able to lift up to 50lbs at a time; help from fellow builders is there when neededMust be able to stand 100% of your dayPrior carpentry experience or custom woodworking skills preferred, but not a mustBenefits IncludedOvertime payCompetitive compensation based on experience, WILL PAY MORE FOR PREVIOUS CABINET BUILDER/MAKER EXPERIENCE, DEPENDS ON SKILL SET. Paid vacationPaid holidays & sick time401K plan after 6 months APPLY NOW! GET THE JOB YOU WANT NOW! NOT THE ONE YOU WILL NEED LATER!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Albert Lea, Minnesota
        • Permanent
        • $15.00 per hour
        • 3:00 PM - 11:30 PM
        Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:30 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Entry level Machine OperatorResponsibilities:Operate Press. Mix Materials. Feeds product into hopper. Removes Parts. Inspect Parts. Trim parts and clip off excess material. Stops machine and reports any malfunction to supervisor immediately. Some Presses are fast operating, some are slower. Will move around to different paced Presses daily.Working hours: 3:00 PM - 11:30 PMSkills:Mechanically Inclined. Detail Oriented. Self Motivated. Dependable. Team Player.Education:No Degree RequiredExperience:0-1 yearsQualifications:Able to life 30lbs frequently and up to 50 lbs. Able to work at a fast pace. Able to stand and walking all day. Able to work in a repetitive work environment. Able to add, subtract, multiply, and divide in all units of measure. Able to read a tape measurer. Steel Toed Boots required and a reimbursement % is paid by company to purchase new. DIRECT HIRE company in Albert Lea that has been around for a very long time and expanding quickly, is searching for entry level machine operators! Willing to train, and known for their willingness to offer people 2nd chances in life.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      30 of 60 jobs seen

      Thank you for subscribing to your personalized job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.