South Lebanon, PA manufacturing company is seeking a reliable machine operator/re-roll helper to set up and safely operate a production machine in accordance with established procedures and guidelines. This is a great opportunity if you are looking for a company with advancement opportunity.Responsibilities:-Prepare, operate, and maintain a production machine to required specifications.-Ensure roll is properly placed on unwinding machine.-Safely and efficiently stack completed rolls onto skid.-Document all actions, communications, irregularities, and continuing needs in a production log.Working hours: 10:00 PM - 6:00 AMSkills:-Ability to push, pull and lift up to 50lbs.-High level of attention to detail for all aspects of the job.-Reliable work history.-Punctuality and the willingness to learn.Education:No Degree RequiredExperience:1-4 yearsQualifications:-Previous production experience is a plus.-Must be able to train on 1st shift. Apply on line at spherion.com/lebanon or call/text us at 717.273.8811!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
South Lebanon, PA manufacturing company is seeking a reliable machine operator/re-roll helper to set up and safely operate a production machine in accordance with established procedures and guidelines. This is a great opportunity if you are looking for a company with advancement opportunity.Responsibilities:-Prepare, operate, and maintain a production machine to required specifications.-Ensure roll is properly placed on unwinding machine.-Safely and efficiently stack completed rolls onto skid.-Document all actions, communications, irregularities, and continuing needs in a production log.Working hours: 10:00 PM - 6:00 AMSkills:-Ability to push, pull and lift up to 50lbs.-High level of attention to detail for all aspects of the job.-Reliable work history.-Punctuality and the willingness to learn.Education:No Degree RequiredExperience:1-4 yearsQualifications:-Previous production experience is a plus.-Must be able to train on 1st shift. Apply on line at spherion.com/lebanon or call/text us at 717.273.8811!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Spherion is hiring production workers in the Emigsville area. It's a great entry-level opportunity!
Spanish speaking candidates welcome.
Monday-Thursday 7:00am-5:00pm Friday 7:00am-3:00pm
13.00 hr. pay rate, this is a temp to hire position
Apply directly at www.spherionpajobs.com/apply.php or call us at 717-843-1000
Weekly pay and additional benefits offered!
Spherion is hiring production workers in the Emigsville area. It's a great entry-level opportunity!
Spanish speaking candidates welcome.
Monday-Thursday 7:00am-5:00pm Friday 7:00am-3:00pm
13.00 hr. pay rate, this is a temp to hire position
Apply directly at www.spherionpajobs.com/apply.php or call us at 717-843-1000
Weekly pay and additional benefits offered!
Spherion is hiring production workers in the Emigsville area. It's a great entry-level opportunity!
Spanish speaking candidates welcome.
Monday-Thursday 7:00am-5:00pm Friday 7:00am-3:00pm
13.00 hr. pay rate, this is a temp to hire position
Apply directly at www.spherionpajobs.com/apply.php or call us at 717-843-1000
Weekly pay and additional benefits offered!
Spherion is hiring production workers in the Emigsville area. It's a great entry-level opportunity!
Spanish speaking candidates welcome.
Monday-Thursday 7:00am-5:00pm Friday 7:00am-3:00pm
13.00 hr. pay rate, this is a temp to hire position
Apply directly at www.spherionpajobs.com/apply.php or call us at 717-843-1000
Weekly pay and additional benefits offered!
We are hiring Parts Inspector positions!!
Weekly pay!$12.50/hr + with OT and bonuses available!
Entry level, no experience required
Grow quickly within in company
Support the production of precision plastic injection molded
Shifts available:
2nd, 3pm- 11:30pm
3rd, 11pm- 7:30am
Apply today!
For more information, you can call 814-454-7305!
We are hiring Parts Inspector positions!!
Weekly pay!$12.50/hr + with OT and bonuses available!
Entry level, no experience required
Grow quickly within in company
Support the production of precision plastic injection molded
Shifts available:
2nd, 3pm- 11:30pm
3rd, 11pm- 7:30am
Apply today!
For more information, you can call 814-454-7305!
General Laborer needed in Belle Vernon. 10 hour shifts, Monday through Friday. Placing bags on a line to be filled with salt then boxed. Pay is $13/hour with a monthly bonus for perfect attendance.
General Laborer needed in Belle Vernon. 10 hour shifts, Monday through Friday. Placing bags on a line to be filled with salt then boxed. Pay is $13/hour with a monthly bonus for perfect attendance.
National Fortune 500 organization seeking Assembly/Repair team members for Washington location. Will be responsible for disassembling commercial beverage dispensers, cleaning all parts, identifying any issues or replacements needed, and reassembling. Team members will then prepare dispenser for shipping.
National Fortune 500 organization seeking Assembly/Repair team members for Washington location. Will be responsible for disassembling commercial beverage dispensers, cleaning all parts, identifying any issues or replacements needed, and reassembling. Team members will then prepare dispenser for shipping.
Local, family-owned business with a proven track record of 60 years of success and growth, is seeking Assembly team members to join their company for their second shift. Assemblers will be responsible for assembing components of air sampling equipment and accessories. Will tke tubes and plastic cartridges and fill them with either treated pieces of cloth, foam, plastic or other materials for air sampling cartridges and tubes. This is a temp-to-hire opportunity.
Local, family-owned business with a proven track record of 60 years of success and growth, is seeking Assembly team members to join their company for their second shift. Assemblers will be responsible for assembing components of air sampling equipment and accessories. Will tke tubes and plastic cartridges and fill them with either treated pieces of cloth, foam, plastic or other materials for air sampling cartridges and tubes. This is a temp-to-hire opportunity.
Local commercial printing business in Canonsburg, with growing national footprint, is seeking associates for the Digital Bindery section. The Digital Bindery associate will monitor printing machines, collected completed printed items, sorting, collating, stacking and boxing according to order specifications. Will prepare materials for shipping to other facilities and/or customers.
Local commercial printing business in Canonsburg, with growing national footprint, is seeking associates for the Digital Bindery section. The Digital Bindery associate will monitor printing machines, collected completed printed items, sorting, collating, stacking and boxing according to order specifications. Will prepare materials for shipping to other facilities and/or customers.
Local commerical printing business in Canonsburg, with a growing national footprint, seeking Fulfillment Associates. As a Fulfillment Associate, you will assemble and attach specific pieces and sections of printed marketing materials. Build marketing kits comprised of various printed pieces and prepare for distribution/shipping to client. This is a long-term temporary/temp-to-hire position.
Local commerical printing business in Canonsburg, with a growing national footprint, seeking Fulfillment Associates. As a Fulfillment Associate, you will assemble and attach specific pieces and sections of printed marketing materials. Build marketing kits comprised of various printed pieces and prepare for distribution/shipping to client. This is a long-term temporary/temp-to-hire position.
Local, family-owned company with 60 years of success seeking a Production Improvement Technician for their manufacturing facility in Eighty-Four, PA. The Production Improvement Technician will perform tasks necessary to identify cause and resolution to production problems related to tooling, machines, drawings, methods, quality of parts and training. In addition, the Production Improvement Technician will create, test, troubleshoot, and inspect assembled machines for defects.
This is a temp-to-perm opportunity.
Local, family-owned company with 60 years of success seeking a Production Improvement Technician for their manufacturing facility in Eighty-Four, PA. The Production Improvement Technician will perform tasks necessary to identify cause and resolution to production problems related to tooling, machines, drawings, methods, quality of parts and training. In addition, the Production Improvement Technician will create, test, troubleshoot, and inspect assembled machines for defects.
This is a temp-to-perm opportunity.
Spherion is looking to hire a Night Shift Compounder in the Latrobe area! No prior experience needed, you will be trained!
Duties:
The Compounder’s responsibilities are to accurately add and
properly mix necessary components (raw materials both powder and liquids) for
casting production line. This compound
is used to process the foam for fire retardancy.
Required to transfer materials to and from
workstation on pallets. Help with
unloading latex foam from truck deliveries.
This position will require CPR/First Aid Training, Confined Space
Training, Forklift, Lockout and Tagout Training.
Respirator clearance required.
Position is medium to heavy with bending at
waist and reaching.
Primarily on feet
walking and standing.
May require
push/pull up to 150 lbs.
Spherion employees enjoy weekly pay with additional benefits offered!
Call today at 724-850-8310 or apply online at https://spherionpajobs.com to get started!
Spherion is looking to hire a Night Shift Compounder in the Latrobe area! No prior experience needed, you will be trained!
Duties:
The Compounder’s responsibilities are to accurately add and
properly mix necessary components (raw materials both powder and liquids) for
casting production line. This compound
is used to process the foam for fire retardancy.
Required to transfer materials to and from
workstation on pallets. Help with
unloading latex foam from truck deliveries.
This position will require CPR/First Aid Training, Confined Space
Training, Forklift, Lockout and Tagout Training.
Respirator clearance required.
Position is medium to heavy with bending at
waist and reaching.
Primarily on feet
walking and standing.
May require
push/pull up to 150 lbs.
Spherion employees enjoy weekly pay with additional benefits offered!
Call today at 724-850-8310 or apply online at https://spherionpajobs.com to get started!
Spherion is hiring for an entry-level Apprentice Machine Operator! No prior experience required, training will be provided!
This facility uses reel to reel electroplating lines which need to constantly run. Each line has multiple chemical tanks and cells for plating. Parts running on each line change daily. Assignment can be keeping the line running / performing routine maintenance / or changing over the line to run the next part. Assignment can change daily so it's an opportunity to learn all aspects of the process!
3 shifts available
1st Shift-7am to 3pm $13.50
2nd Shift-3pm to 11pm $15.00
3rd Shift-11pm to 7am $15.00
Call us today at 724-850-8310 to get started!
Let's Get to Work!
Spherion is hiring for an entry-level Apprentice Machine Operator! No prior experience required, training will be provided!
This facility uses reel to reel electroplating lines which need to constantly run. Each line has multiple chemical tanks and cells for plating. Parts running on each line change daily. Assignment can be keeping the line running / performing routine maintenance / or changing over the line to run the next part. Assignment can change daily so it's an opportunity to learn all aspects of the process!
3 shifts available
1st Shift-7am to 3pm $13.50
2nd Shift-3pm to 11pm $15.00
3rd Shift-11pm to 7am $15.00
Call us today at 724-850-8310 to get started!
Let's Get to Work!
Spherion is looking for a Industrial Production Laborer in Latrobe, PA! In need of a laborer to perform various tasks throughout the plant!
What you need to know..
Weekly pay!
Will be trained!
Heavy lifting may be required
Dependable candidate and good attitude wanted!
$15.70/hr
Additional benefits offered!
Apply today to get started!
Spherion is looking for a Industrial Production Laborer in Latrobe, PA! In need of a laborer to perform various tasks throughout the plant!
What you need to know..
Weekly pay!
Will be trained!
Heavy lifting may be required
Dependable candidate and good attitude wanted!
$15.70/hr
Additional benefits offered!
Apply today to get started!
Our Greensburg, PA client is looking for a 2nd shift CNC machinist for a temp to hire position!
• Candidate shall be proficient at operating CNC lathes and
mills in a production environment.
This includes: Loading and unloading parts, making necessary speed and
feed adjustments, conducting inprocess sample visual and quality inspections,
performing tool and insert changes as needed and
deburring parts as they come off the machine using dremels.
Candidate shall be able to perform set-ups on CNC mills
and lathes using existing programs and fixturing
Candidate shall be accountable for housekeeping of his/her
area and cleanliness of his/her machine as
well as routine machine care and maintenance
Position regularly requires the employee to: stand, use hands to handle and/or feel objects, tools, or
controls, and reach with hands and arms
The work environment includes working near moving mechanical
parts and machines that create
a moderately high noise level. Wear protective equipment, work as part of a team, and
understand and apply work-related
documents such as operating manuals, maintenance
instructions, and drawings!
Weekly pay and additional benefits offered! Pay rate will be based on experience and qualifications!
Our Greensburg, PA client is looking for a 2nd shift CNC machinist for a temp to hire position!
• Candidate shall be proficient at operating CNC lathes and
mills in a production environment.
This includes: Loading and unloading parts, making necessary speed and
feed adjustments, conducting inprocess sample visual and quality inspections,
performing tool and insert changes as needed and
deburring parts as they come off the machine using dremels.
Candidate shall be able to perform set-ups on CNC mills
and lathes using existing programs and fixturing
Candidate shall be accountable for housekeeping of his/her
area and cleanliness of his/her machine as
well as routine machine care and maintenance
Position regularly requires the employee to: stand, use hands to handle and/or feel objects, tools, or
controls, and reach with hands and arms
The work environment includes working near moving mechanical
parts and machines that create
a moderately high noise level. Wear protective equipment, work as part of a team, and
understand and apply work-related
documents such as operating manuals, maintenance
instructions, and drawings!
Weekly pay and additional benefits offered! Pay rate will be based on experience and qualifications!
Spherion is looking for an Apprentice Machine Operator/Welder in the Saltsburg Area! This is an entry-level position and no prior experience is needed!
Duties:
Operate welding and T-bolt V-band machines
These machines weld and assemble components to completed assembly. They automatically weld together parts of fabricated metal products!
Operators select and identify and move parts (bands, screws, housings, springs, etc.) as required
Must be able to work all 3 shifts-Union after 90 days
$15.20 & Up
Temp to Hire! If hired on permanently this is a Union position with potential to make over $27/hr in 2 years.
Spherion offers weekly pay and additional benefits!
To get started, call 724-850-8310!
Spherion is looking for an Apprentice Machine Operator/Welder in the Saltsburg Area! This is an entry-level position and no prior experience is needed!
Duties:
Operate welding and T-bolt V-band machines
These machines weld and assemble components to completed assembly. They automatically weld together parts of fabricated metal products!
Operators select and identify and move parts (bands, screws, housings, springs, etc.) as required
Must be able to work all 3 shifts-Union after 90 days
$15.20 & Up
Temp to Hire! If hired on permanently this is a Union position with potential to make over $27/hr in 2 years.
Spherion offers weekly pay and additional benefits!
To get started, call 724-850-8310!
·
Follows
ALL Safety Guidelines / Practices.
·
Ability
to perform press basic job functions:
Ø Crane operation
Ø Crane scales
Ø Scrape / Vacuum molds
Ø Apply mold release
Ø Load & level molds
·
Detailed
understanding of Manufacturing Order (MO), including Bill of Material components
& operational steps; along with text instructions.
·
Responsible
to follow established standard operating & quality procedures.
·
Utilize
Fork Truck to move & stage materials, understands Pallet Load Restrictions.
·
Understands
Press schedule & maintains production according to the schedule.
·
Performs
sheet quality inspections / measurements & documents, as necessary, to
ensure first quality with accuracy.
·
Operate
Press Saw, as required.
·
Perform
Housekeeping / TPEM / 5S, as required.
·
Perform
Movex transactions, as required.
·
Operate whirlwind & high-speed mixers; as
trained.
·
Follows
ALL Safety Guidelines / Practices.
·
Ability
to perform press basic job functions:
Ø Crane operation
Ø Crane scales
Ø Scrape / Vacuum molds
Ø Apply mold release
Ø Load & level molds
·
Detailed
understanding of Manufacturing Order (MO), including Bill of Material components
& operational steps; along with text instructions.
·
Responsible
to follow established standard operating & quality procedures.
·
Utilize
Fork Truck to move & stage materials, understands Pallet Load Restrictions.
·
Understands
Press schedule & maintains production according to the schedule.
·
Performs
sheet quality inspections / measurements & documents, as necessary, to
ensure first quality with accuracy.
·
Operate
Press Saw, as required.
·
Perform
Housekeeping / TPEM / 5S, as required.
·
Perform
Movex transactions, as required.
·
Operate whirlwind & high-speed mixers; as
trained.
Work on one packaging station to finish and pack product. Packaging associates move through the following operations on a regular basis: Slitting and splicing ribbons and attaching take up core. Banding and packaging TTR and hand packaging rolls in a carton and a box Operate production machines and complete all required duties. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Overnight 12 hour shifts on a 2, 2, 3 schedule. Work only 14 days per month.
The employee is occasionally required to walk.
The employee must constantly grasp, lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.
Work on one packaging station to finish and pack product. Packaging associates move through the following operations on a regular basis: Slitting and splicing ribbons and attaching take up core. Banding and packaging TTR and hand packaging rolls in a carton and a box Operate production machines and complete all required duties. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Overnight 12 hour shifts on a 2, 2, 3 schedule. Work only 14 days per month.
The employee is occasionally required to walk.
The employee must constantly grasp, lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.
Spherion is looking to hire an Apprentice Machine Operator! No experience needed; training will be provided! Full-time with possible over-time opportunities!
Machine Operators will produce fittings and pipes for gas furnaces, stoves, hot water tanks, etc.
Several work stations to man including Residential, Centerline, Furnace and Air Test positions
2nd and 3rd Shifts available!
$15.00/$15.50/$16.00
Apply today!
Spherion is looking to hire an Apprentice Machine Operator! No experience needed; training will be provided! Full-time with possible over-time opportunities!
Machine Operators will produce fittings and pipes for gas furnaces, stoves, hot water tanks, etc.
Several work stations to man including Residential, Centerline, Furnace and Air Test positions
2nd and 3rd Shifts available!
$15.00/$15.50/$16.00
Apply today!
Our client in Delmont, PA seeks a temp to hire fabricator for 2nd shift 3pm-11pm
Primary Responsibilities:
·
Follows
ALL Safety Guidelines / Practices.
·
Utilize
Fork Truck to move & stage material.
·
Perform
Movex transactions, as required.
·
Perform
Housekeeping / TPEM / 5S, as required.
·
Shaper
operation:
Ø Set-up
Ø Operation
Ø Preventive Maintenance
Ø Emergency Stops
Ø Guarding
Ø Arbor identification & angle
capabilities
Ø Chip Removal
Ø Cutter identification, storage, &
care of
·
Record
quality information on Data Collections Sheets (DCS).
·
Verification
of measuring tool calibration.
·
Work
In-process Inspection.
·
Read
& comprehend Blueprints.
·
Molder:
Ø Set-up
Ø Operation
Ø Preventive Maintenance
Ø Emergency Stops
Ø Guarding
Ø Chip Removal
Ø Cutter identification, storage, &
care of
·
Understand
Regrind / material knowledge; including Rapid Mill operation.
·
Read
Manufacturing Orders, product identification, & check product quality.
·
Power
Feeder:
Ø Set-up
Ø Operation
Ø Preventive Maintenance
Ø Emergency Stops
Ø Guarding
·
Utilize
hand tools:
Ø Circular Saw
Ø Routers
Ø Cordless Drill
Ø Grinders
Ø Pneumatic tools in a safe &
professional manner
·
Understand
warehouse locations, skid tags, sheet labels, & basic plant layout.
·
Be
aware of when equipment requires maintenance & notify proper personnel.
·
Calculate
left over pounds for cut offs.
·
Perform
duties of:
Ø Banding equipment
Ø Packaging material
Ø Deburring
·
Micro
Skiver:
Ø Set-up
Ø Operation
Ø Preventive Maintenance
Ø Emergency Stops
Ø Guarding
Our client in Delmont, PA seeks a temp to hire fabricator for 2nd shift 3pm-11pm
Primary Responsibilities:
·
Follows
ALL Safety Guidelines / Practices.
·
Utilize
Fork Truck to move & stage material.
·
Perform
Movex transactions, as required.
·
Perform
Housekeeping / TPEM / 5S, as required.
·
Shaper
operation:
Ø Set-up
Ø Operation
Ø Preventive Maintenance
Ø Emergency Stops
Ø Guarding
Ø Arbor identification & angle
capabilities
Ø Chip Removal
Ø Cutter identification, storage, &
care of
·
Record
quality information on Data Collections Sheets (DCS).
·
Verification
of measuring tool calibration.
·
Work
In-process Inspection.
·
Read
& comprehend Blueprints.
·
Molder:
Ø Set-up
Ø Operation
Ø Preventive Maintenance
Ø Emergency Stops
Ø Guarding
Ø Chip Removal
Ø Cutter identification, storage, &
care of
·
Understand
Regrind / material knowledge; including Rapid Mill operation.
·
Read
Manufacturing Orders, product identification, & check product quality.
·
Power
Feeder:
Ø Set-up
Ø Operation
Ø Preventive Maintenance
Ø Emergency Stops
Ø Guarding
·
Utilize
hand tools:
Ø Circular Saw
Ø Routers
Ø Cordless Drill
Ø Grinders
Ø Pneumatic tools in a safe &
professional manner
·
Understand
warehouse locations, skid tags, sheet labels, & basic plant layout.
·
Be
aware of when equipment requires maintenance & notify proper personnel.
·
Calculate
left over pounds for cut offs.
·
Perform
duties of:
Ø Banding equipment
Ø Packaging material
Ø Deburring
·
Micro
Skiver:
Ø Set-up
Ø Operation
Ø Preventive Maintenance
Ø Emergency Stops
Ø Guarding
1st and 2nd Shifts needed!
Part Time Position is Mon-Fri 9am to 2pm- $13/hour. Get kids on and off the school bus!
Packing cookies for shipment on an assembly line: 1st shift $13/hr, 2nd shift $15/hr
Bakery Cutter Position: 1st shift $15, 2nd shift $17 per hour
Mandatory Overtime on 1st shift!
Weekly pay and weekly attendance bonus!
Apply Today!
1st and 2nd Shifts needed!
Part Time Position is Mon-Fri 9am to 2pm- $13/hour. Get kids on and off the school bus!
Packing cookies for shipment on an assembly line: 1st shift $13/hr, 2nd shift $15/hr
Bakery Cutter Position: 1st shift $15, 2nd shift $17 per hour
Mandatory Overtime on 1st shift!
Weekly pay and weekly attendance bonus!
Apply Today!
Our client in Export, PA is looking for people to train as an Industrial Press Operator! Second chance employer!
Reliable person with a good attitude is what we're looking for!
Our client is a second-chance employer
This is a temporary to permanent position
You will be trained!
$17 an hour!
Please fill out our online application, today!
Our client in Export, PA is looking for people to train as an Industrial Press Operator! Second chance employer!
Reliable person with a good attitude is what we're looking for!
Our client is a second-chance employer
This is a temporary to permanent position
You will be trained!
$17 an hour!
Please fill out our online application, today!
A local company is hiring shipping and manufacturing associates. Work in a relaxed environment
A local company is hiring shipping and manufacturing associates. Work in a relaxed environment
Located in Loyalhanna, PA an Airo Division Company looking for Full-time Finishers!
Duties:
Use of gauges to assure the quality of the castings
Stand and operate machine or equipment continuously
Capable and willing to work overtime
Participate in training to upgrade skills as necessary, and move forward with changing technology!
This opportunity is Temp to hire, and offerings training to improve your skill set!
Weekly Pay
2nd and 3rd shift available
Attendance Incentive - Increase your hourly rate $3.63 to $4.70
Benefits offered: Medical, Vision, Dental, Short Term Disability, and Life Insurance
Call us today at 724-850-8310 to get started!
Located in Loyalhanna, PA an Airo Division Company looking for Full-time Finishers!
Duties:
Use of gauges to assure the quality of the castings
Stand and operate machine or equipment continuously
Capable and willing to work overtime
Participate in training to upgrade skills as necessary, and move forward with changing technology!
This opportunity is Temp to hire, and offerings training to improve your skill set!
Weekly Pay
2nd and 3rd shift available
Attendance Incentive - Increase your hourly rate $3.63 to $4.70
Benefits offered: Medical, Vision, Dental, Short Term Disability, and Life Insurance
Call us today at 724-850-8310 to get started!
We are hiring Production Associates in Erie, PA!
Weekly Pay
$14/hr +
1st shift: Monday-Friday 7a-330pm
2nd shift: Monday- Friday 3pm-11:30pm
Very clean work environment
Plenty of Departments and opportunity!
APPLY NOW - For more information call 814.454.7305
We are hiring Production Associates in Erie, PA!
Weekly Pay
$14/hr +
1st shift: Monday-Friday 7a-330pm
2nd shift: Monday- Friday 3pm-11:30pm
Very clean work environment
Plenty of Departments and opportunity!
APPLY NOW - For more information call 814.454.7305
Bedford Spherion is hiring a qualified full-time Welder for a spectacular manufacturer in Bedford, PA!
Here's What to Know:
Weekly pay!
Immediate opening!
Pick and choose your own benefits!
Monday through Friday!
Dayshift!
Opportunities of overtime!
Knowledge of stainless & aluminum welding experience
Comfortable working in a fast-paced manufacturing environment
If interested, please call one of our Spherion representatives at 814-623-6360 to schedule an interview!
Bedford Spherion is hiring a qualified full-time Welder for a spectacular manufacturer in Bedford, PA!
Here's What to Know:
Weekly pay!
Immediate opening!
Pick and choose your own benefits!
Monday through Friday!
Dayshift!
Opportunities of overtime!
Knowledge of stainless & aluminum welding experience
Comfortable working in a fast-paced manufacturing environment
If interested, please call one of our Spherion representatives at 814-623-6360 to schedule an interview!
Looking for reliable candidates for a Lebanon, Pa production facility for 2nd and 3rd shift.Responsibilities:- Packing/Stacking/Shrink Wrapping product.- Inspecting product for an imperfections.- Logging accurate count of product and boxes.Working hours: Various Shifts AvailableSkills:- Ability to lift up to 40lbs- Attention to detail- Ability to bend/stoopEducation:No Degree RequiredExperience:0-1 yearsQualifications:Warehouse/Production experience helpful but not necessary. Apply on line or call/text us at 717.273.8811Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
Looking for reliable candidates for a Lebanon, Pa production facility for 2nd and 3rd shift.Responsibilities:- Packing/Stacking/Shrink Wrapping product.- Inspecting product for an imperfections.- Logging accurate count of product and boxes.Working hours: Various Shifts AvailableSkills:- Ability to lift up to 40lbs- Attention to detail- Ability to bend/stoopEducation:No Degree RequiredExperience:0-1 yearsQualifications:Warehouse/Production experience helpful but not necessary. Apply on line or call/text us at 717.273.8811Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
A Lebanon Pa food production facility is looking for 1st shift production workers.Responsibilities:This work includes opening bags of ingredient, packing product into boxes and stacking boxes on skids.Working hours: 7:00 AM - 3:30 PMSkills:-Ability to lift up to 35lbs.-Prolonged standing for periods of time.-Basic mathematical abilities.-Work independently and as a part of a team.Education:No Degree RequiredExperience:1-4 yearsQualifications:-Reliable work history.-Follow safe work habits and GMP's Apply on line or call/text us at 717/273-8811Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
A Lebanon Pa food production facility is looking for 1st shift production workers.Responsibilities:This work includes opening bags of ingredient, packing product into boxes and stacking boxes on skids.Working hours: 7:00 AM - 3:30 PMSkills:-Ability to lift up to 35lbs.-Prolonged standing for periods of time.-Basic mathematical abilities.-Work independently and as a part of a team.Education:No Degree RequiredExperience:1-4 yearsQualifications:-Reliable work history.-Follow safe work habits and GMP's Apply on line or call/text us at 717/273-8811Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
The Injection Molding Utility-Quality Inspector is responsible for handling materials and general/basic operation and upkeep of machinery in the mold shop.Responsibilities:Ensures all safety procedures are followed and actively works to improve our safety program.Ensures all quality procedures are followed and actively works to improve our quality program.Follows all procedures & work instructionsWorks to maintain a clean & organized working environment (5s)The requirements for completing the quality check procedures in the Molding Department will consist primarily of one - full part inspections for all running machines, visual inspections of parts on all machines, end box inspectionsConduct molding department first piece checks within 15 minutes of receipt of email notification (when possible)Conduct daily tensile testing on all automotive links to verify they meet mechanical requirementsConduct pitch testing of links dailyCommunicate deviations, concerns, process improvement suggestions to both the Molding Manager and Quality ManagerComplete all required paperwork and documentation as instructed and enter data into manufacturing systems and/or databasesMaintain a positive attitude and strong work ethic meeting the high standard required of all personnelMaintain quality of daily activities- (thoroughly investigates issues, uses sound judgement, etc.)Notify the Quality Manager and Production Manager of any deviations that will affect the assembly of and shipping of an order on time. (email address will be provided)Work overtime when required and necessaryOther duties as assignedWorking hours: 7:00 AM - 7:00 PM (Various Shifts Available)Skills:Must be able to work in the USMust be an effective communicatorAbility to use measuring equipment such as calipers, micrometers and tape measuresFamiliarity with MSOffice SuiteHigh School Diploma or equivalentEducation:High SchoolExperience:1-4 yearsQualifications:Detail orientedCommunicates effectivelyWorks well within a Team environmentMust be able to complete tasks effectively, efficiently and accurately with exceptional attention to detailAbility to frequently lift up to 55 pounds.This position is very active and requires frequent standing, walking, bending, kneeling, stooping, crouching, crawling, climbing; use of hands to finger, handle or feel, reach with hands and arms.This position requires frequent communications with other employees. Must be able to exchange accurate information in these situations.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Looking for a positive, motivated individual that wants to join a talented Team in a company currently undergoing a large expansion project - NEW MACHINES, NEW TECHNOLOGY, NEW FACILITY!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
The Injection Molding Utility-Quality Inspector is responsible for handling materials and general/basic operation and upkeep of machinery in the mold shop.Responsibilities:Ensures all safety procedures are followed and actively works to improve our safety program.Ensures all quality procedures are followed and actively works to improve our quality program.Follows all procedures & work instructionsWorks to maintain a clean & organized working environment (5s)The requirements for completing the quality check procedures in the Molding Department will consist primarily of one - full part inspections for all running machines, visual inspections of parts on all machines, end box inspectionsConduct molding department first piece checks within 15 minutes of receipt of email notification (when possible)Conduct daily tensile testing on all automotive links to verify they meet mechanical requirementsConduct pitch testing of links dailyCommunicate deviations, concerns, process improvement suggestions to both the Molding Manager and Quality ManagerComplete all required paperwork and documentation as instructed and enter data into manufacturing systems and/or databasesMaintain a positive attitude and strong work ethic meeting the high standard required of all personnelMaintain quality of daily activities- (thoroughly investigates issues, uses sound judgement, etc.)Notify the Quality Manager and Production Manager of any deviations that will affect the assembly of and shipping of an order on time. (email address will be provided)Work overtime when required and necessaryOther duties as assignedWorking hours: 7:00 AM - 7:00 PM (Various Shifts Available)Skills:Must be able to work in the USMust be an effective communicatorAbility to use measuring equipment such as calipers, micrometers and tape measuresFamiliarity with MSOffice SuiteHigh School Diploma or equivalentEducation:High SchoolExperience:1-4 yearsQualifications:Detail orientedCommunicates effectivelyWorks well within a Team environmentMust be able to complete tasks effectively, efficiently and accurately with exceptional attention to detailAbility to frequently lift up to 55 pounds.This position is very active and requires frequent standing, walking, bending, kneeling, stooping, crouching, crawling, climbing; use of hands to finger, handle or feel, reach with hands and arms.This position requires frequent communications with other employees. Must be able to exchange accurate information in these situations.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Looking for a positive, motivated individual that wants to join a talented Team in a company currently undergoing a large expansion project - NEW MACHINES, NEW TECHNOLOGY, NEW FACILITY!!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
We are interviewing for Metal Fabrication Assemblers in the Johnstown area!
The role of the assembler is to assemble various parts according to customer orders. This position may also require working in different departments when needed.
Hours are Monday - Friday, 7:00 to 3:00 pm, with possible OT on Saturdays.
Pay is $12.00 an hour, with weekly pay through Spherion.
Previous manufacturing experience is highly desired.
Apply on our website at https://www.spherionpajobs.com.
We are interviewing for Metal Fabrication Assemblers in the Johnstown area!
The role of the assembler is to assemble various parts according to customer orders. This position may also require working in different departments when needed.
Hours are Monday - Friday, 7:00 to 3:00 pm, with possible OT on Saturdays.
Pay is $12.00 an hour, with weekly pay through Spherion.
Previous manufacturing experience is highly desired.
Apply on our website at https://www.spherionpajobs.com.
We are currently interviewing for qualified Board Maskers for our Johnstown facility.
The role of the circuit board masker is to ensure accurate masking placements on all boards according to schematics. They must make sure the masking material covers all parts with no exposure.
This is a great opportunity for those with an electrical background with weekly pay through Spherion!
Hourly pay is $11.00.
Apply on our website:
www.spherionPAjobs.com click on the "Apply Now" button at the upper
right-hand corner and complete our application!
We are currently interviewing for qualified Board Maskers for our Johnstown facility.
The role of the circuit board masker is to ensure accurate masking placements on all boards according to schematics. They must make sure the masking material covers all parts with no exposure.
This is a great opportunity for those with an electrical background with weekly pay through Spherion!
Hourly pay is $11.00.
Apply on our website:
www.spherionPAjobs.com click on the "Apply Now" button at the upper
right-hand corner and complete our application!