23 Design Manufacturing & Production jobs found

The Senior Controls Engineer is responsible for designing, developing, and maintaining electrical control systems for custom industrial deburring, parts washing, metal finishing machines and panel building equipment. In this position you will work on multiple equipment projects and be responsible for the electrical related aspects of each project, from design to installation and commissioning. We use SolidWorks and SolidWorks Electrical software to model various electrical components, enclosures, panel layouts and wiring schematics as needed for new designs and re-design of existing machines. Our Controls Engineer will work with various customer-submitted industrial equipment specifications as they relate to the electrical portion of the equipment order, write programmable logic controller (PLC) programs along with programs for operator touch screens that are used in the machines, inspect the electrical portion of used equipment that is returned for rebuild, confer with vendors and work with purchasing to specify electrical components needed for projects, and work with customers during equipment build and commissioning. You may have the opportunity to travel (domestically and internationally) in order to troubleshoot and service equipment in the field. The work environment is primarily an office position but does include factory work for commissioning and troubleshooting of equipment. Travel may be required to customer facilities to troubleshoot, program and modify equipment or to assist the customer's workers in doing so.Responsibilities:Serve as a mentor to engineering and manufacturing team members assisting them with the design, panel building, PLC configuration and other areas of expertise.Design functional electrical systems to meet customer specifications through the development and testing of various components.Utilizes SolidWorks and other computer aided design techniques to perform design work. Uses SolidWorks Electrical to create and modify electrical schematics. Develop new PLC and HMI programs from scratch as required for equipment built for customer orders. Conduct detailed research of electrical equipment and systems and report findings.Develop various testing methods and properties to confirm the functionality of components and systems.Communicate engineering information with various stakeholders to facilitate successful completion of projects.Performs a variety of engineering calculations using algebraic, trigonometric, and geometric formulas. Use standard product engineering data for the development of product configurations. Inspect equipment installations and observe operations to ensure compliance with design and equipment specifications ensuring all safety standards are met.Participate in experimental manufacture and testing of finished product.Working hours: 7:00 AM - 4:00 PMSkills:--Excellent computer skills to include a working knowledge of Microsoft Office products.--Ability to analyze problems and select proper corrective action. --Excellent written and verbal communications.--Ability to organize tasks and work independently.--Previous experience mentoring preferred.Education:BachelorsExperience:1-4 yearsQualifications:A degree in engineering, electrical engineering technology, design/drafting, controls, or related field.A minimum of 3 years? experience utilizing SolidWorks as a design program.Extensive work experience in programming and troubleshooting of PLCs (Allen-Bradley, Siemens, and others) and operator touch screens.Previous experience in panel design required, with previous experience with panel building preferred.Experience with three-phase industrial electrical system design and a general working knowledge of industrial machinery is required. Direct Hire

Spherion is hiring for a Mechanical Assembler in Indianapolis, IN. Pay is $22/HRShift is Monday - Friday 6AM - 3:30PMJOB SUMMARY:The Mechanical Assembler III is responsible for the assembly, reworks and repairs on manufactured equipment and products in accordance with established procedures. This position reads work orders; follows and interprets production drawings and sample assemblies or receives verbal instructions regarding duties performed. The Mechanical Assembler II performs assembly work using hand-held tools and soldering equipment, and ensures the products meet quality standards, performing quality work checks.Responsibilities:- Assembles and tests equipment (primarily industrial process pumps) per engineered drawings or as instructed by others.- Uses hand tools, power tools, and measuring devices such as tapes, gauges, calipers, and micrometers, power tools, pallet jacks, fixed gauges, and jigs.- Plans work and follows procedures; gathers required tools and materials based on instructions and specifications provided for the job.- Repairs, takes apart, rebuilds equipment (pumps) to obtain an acceptable result- Inspects completed components for accuracy and functionality.- Performs tests on components as necessary.- Executes individual quality inspection throughout the assembly process, marking and setting aside parts which have obvious defects and informing supervisor and/or set-up personnel of any issues.- Reads and follows production orders and diagrams for the product being produced, tests electric wire and terminal connections for mechanical strength and electrical continuity in assembly.Completes proper paperwork for checklist.- Determines non-conforming material coming from other departments.- Operates and adjusts tools, gauges, use hand Implement continuous improvement practice to reduce errors- Performs other duties of a similar nature and level as assigned.Working hours: 6:00 AM - 3:30 PMSkills:KNOWLEDGE IN:- Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.- Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.- Design - Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.- Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment tothe design and production of various goods and services.Education:High SchoolExperience:0-1 yearsQualifications:A high school degree or GED and 3 plus years of experience working in the assembly, industrial, mechanical, or manufacturing fields. Experience working with hand/power tools, torque wrenches, band saws, sanders/grinders required. Experience with QC or Testing. Electrical experience is a plus, but not required. Experience working with rotating equipment is also a plus, but not required. Must be mechanically inclined and have the drive to learn and grow in the technical space. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Growing Columbia County manufacturing facility is adding to the team! If you're eager to join an organization where you'll be designing tooling, fixtures, and machines for manufacturing operations that are safe, high quality, manufacture-able, accurate and meet project scope error-free, then this is the position you've been searching for!.In this position you will design and implement tooling, fixturing, and machinery to support new process development and continuous improvement projects. This position will collaborate with manufacturing engineering teams to develop equipment solutions for assembly and manufacturing. In addition, you will responsible for researching new technologies and innovations in order to implement cost effective and efficient solutions. If you thrive when responsible for managing project deadlines for both the tool & equipment design team as well as the tool and die department, read on to learn more.Responsibilities include:Coordinate the repair, rebuild and improvement of tooling, fixturing, and machineryResponsible for quoting and project deadlines for new tooling and equipment design projects.Reviews and approves designs, drawings, details, etc. at the group level. Specifies, requisitions, and buys tooling materials and components. Expedites tooling projects to insure their timely completion.Performs as liaison, when assigned, with equipment manufacturers, sub-contractors and tooling service firms engaged by the company.Support NPD and continuous improvement projects by collaborating with engineering and operations teams to ensure project deadlines are achievedProvides engineering assistance during tool construction and initial tool tryout and debug. Ensures that tools are dimensionally verified and are production ready when released.Establish process for design request and direct equipment design and tool and die team prioritiesKeeps abreast of new developments in the field of tooling, applications and methods. Recommends the adoption of innovations when applications are feasible to improve quality and production or reduce manufacturing costs.Maintain tool drawing file to insure that all tool designs are maintained in as-built status in accordance to QSP-0096Must be able to manage multiple projects concurrentlyWorking hours: 7:00 AM - 3:00 PMSkills:The ideal candidate:--Ability to manage multiple projects with time sensitivity--Creativity in problem solving--Proven ability to meet deadlines--Clear communicator and can convert complex ideas into designs--Strong collaborationEducation:AssociateExperience:4-7 yearsQualifications:Qualified candidates should possess:--Min two-year degree required--5+ years of experience as a tool & die or equipment designer--Must be proficient in the use of CAD--Pro E software experience preferred--Strong background in die/fixture design, metal working materials, mechanics, and heat treating--Required experience and familiarity with CNC machine tools and parts making--Preferred experience with WindchillDon't delay, submit your resume and application today: www.spherion.com/apply/75751Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

We are actively seeking a Structural Designer/Detailer position for our client in Superior, WI. This is a Full Time Direct Hire role. The Designer/Detailer position is responsible for various structural designs, layout details, layouts and documentation related to our clients products and systems.Responsibilities:DESIGN AND DOCUMENTATION OF OFF-ROAD MOBILE PRODUCTS??? Support engineers by performing relevant calculations and/or measurements on assemblies and steel fabricated components required for mobile equipment.??? Prepare, modify, and release drawings created in SolidWorks.??? Prepares change requests, requisitions, and parts lists.??? Structure/maintain bill of materials and Engineering Change Orders (ECOs).??? Follow the standards established in the Engineering Standards Manual.??? Support engineers with machine and/or sub-system testing and validation.PROVIDE PRODUCTION DOCUMENTATION FOR NEW PRODUCT??? Create new production drawings from solid model layouts within SolidWorks using the latest drafting standards.??? Assign part numbers for new parts.??? Take solid models from an engineering design level to production level models in SolidWorks.??? Create bill of materials for new product based on solid models.??? Create production release notices.DESIGN SUPPORT FOR EXISTING PRODUCTS??? Implement cost savings suggestions.??? Initiate design or manufacturing process ideas that will reduce the cost of products.PROVIDE SUPPORT FOR MANUFACTURING AND SALES??? Assist shop personnel interpret designs and drawings.??? Seek input from the shop to make designs easier to manufacture.??? Create dimensional layouts and technical specifications for use by sales.Working hours: 8:00 AM - 4:30 PMSkills:Communication: Excellent communication skills, both written and verbal communication.Technology: Strong working knowledge of MS Office, SolidWorks, PDM software and ERP/MRP software preferred. General knowledge of AutoCAD, DraftSight, Parker IQAN, and Zuken E3 preferred.Education:AssociateExperience:1-4 yearsQualifications:Experience and Education:??? Experience: 2+ Years of Experience preferred??? Education: Technical College diploma or related experience in design fundamentals including but not limited to: Mathematics, Drafting, and Shop Processes.??? Communication: Excellent communication skills, both written and verbal communication.??? Technology: Strong working knowledge of MS Office, SolidWorks, PDM software and ERP/MRP software preferred. General knowledge of AutoCAD, DraftSight, Parker IQAN, and Zuken E3 preferred. Apply now! Please include your resume.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Staffing has an immediate need to fill an Electrical Engineering Technician role in Spokane Valley Industrial Park. In this role you will be developing and maintaining expert operating knowledge of electrical equipment (inverters, batteries, etc) used in energy storage system applications and also of electrical equipment used in general energy storage applications. Assists with the design and development and selection of hardware and creation of hardware control software and algorithms within various energy storage software applications.Responsibilities:Develop and maintain expert operating knowledge of particular electrical equipment.Develop and maintain general knowledge of electrical equipment used in general energy storage applications.Develop and maintain trusted relationships with co-workers and customers.Develop and maintain working operating knowledge of company software.Assist as needed in laboratory experiments and tests.Develop sound alternatives for integrating new solutions into the R&D Lab environment.Other general responsibilities.Working hours: 8:00 AM - 4:30 PMSkills:Experience with embedded microprocessor systems, standalone applications, and web-based systems is highly desired.Demonstrated ability to collaborate effectively with HW and SW development engineers is essential.Experience with various communications protocols a plusExcellent understanding of electrical engineering discipline and the design and test of complex automation/control systems.Education:BachelorsExperience:4-7 yearsQualifications:BS Electrical Engineering or equivalent experience, industrial automation or power engineering specialty a plus.4+ years of general EE experience, power engineering or inverter knowledge and operation a plus. Apply onlineSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is recruiting an Electronics Technician for our client! This innovative company develops, manufactures and sells radiotherapy systems for alternative cancer treatments. The Electronics Technician is for creating documentation of electrical system and sub-system cabling. Documentation will be created in Visio or a similar tool. Secondary responsibilities will be standard electrical engineering technician responsibilities.Responsibilities:- Experience creating documentation in Visio (or similar tool) that can be applied to the creation of cable documentation- Ability to apply sound engineering practices in the design of electrical system and sub-system cabling- Ability to communicate across many Engineering disciplines to work with and gather information, assuring the final cable design meets all necessary requirements- Provide manufacturing support. This would consist of identifying second sources for cable components. Evaluate other cabling options when availability becomes an issue, and when requested, support manufacturing with first article inspections- Ability to build prototype cable assemblies from drawing specifications- Capable of testing first of a kind, and one-off cables- Be available for onsite support when necessary- Ability to populate, rework, and trouble-shoot printed circuit board assemblies, build up and maintain electronic subassemblies using hand tools and test equipment- Support engineering by submitting purchase orders for components and off-the-shelf assemblies and aiding in receiving these items- Participate in evaluating engineering proposals, technical drawings, or design comments for sound electrical engineering practice or conformance with design criteria- Support of engineering project management by providing time estimates on work- Adhere to company procedure and training requirementsWorking hours: 8:00 AM - 5:00 PMSkills:- High degree of experience working with Visio or similar tools- Hands-on experience with electronic test equipment, as well as familiarity with shop machinery that may be utilized to fabricate prototype components- Ability to problem solve electronic board issues and provide recommendations- Good computer skills, including the use of standard office software programs including spreadsheets, word-processing, and email applications- Good verbal and written communication skills- IPC-610 certification is a plus- Experience in a full life cycle for medical electronics projects is desirable, including product development, manufactured, and installed base supportEducation:AssociateExperience:1-4 yearsQualifications:- Associates degree or post-Secondary certificate in electronics/engineering is required- At least 2 years of technician experience in electronics industry. Suitable work experience in a technically related field may be considered in lieu of formal education Apply via the Apply button in the top right hand corner today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Person needs to be able to read/create detailed sketches or notes according to specified dimensions by hand or by computer aided design (CAD) system. Plans and operates numerical control program and equipment to control contour path machining of parts on automatic machine tools.

We are looking for Warehouse Associate who is willing to work in fast-paced environment. We have various shifts and positions open and will be discussed during the pre-screening interview.+ Various shifts available+ Warehouse Experience preferredResponsibilities:Organize, coordinate, and execute building and testing of prototypes/products per engineering instructions.Assist in the design and development of new product manufacturing processes.Be a technical resource for projects transitioning to production.Record prototype designs and process steps in a clear and concise format.Communicate project status to internal stakeholdersWorking hours: 2:45 PM - 11:15 PM (Various Shifts Available)Skills:Computer skills required: Microsoft OfficeAbility to execute an experimentTechnical WritingProblem-solving skillsEducation:High SchoolExperience:0-1 yearsQualifications:Associate degree from two-year college or university preferred; or2 years of related experience and/or training; orEquivalent combination of education and experience. Direct depositHealthDentalVisionEmployee DiscountsSpherion?s local offices are waiting to hear from you today! Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Sets up and operates a variety of presses to perform repetitive work. Performs manual operation only, using pre-sheared strip and blank size stock for a variety of materials. Adjusts mechanical knockout devices and ram stroke. Performs minor repair of dies and determines when maintenance is required. Obtains first piece approval from inspection. Arranges work places, furnishes materials and manufacturing information, and demonstrates operation of equipment to lower level operators. Monitors operation of equipment during production run and makes any necessary adjustments.Responsibilities:Performs sheet metal operations to fabricate a limited variety of units or products of more standard design.May do simple layout work.Able to operate all types of sheet metal machines to cut bend or form parts and uses sheet metal hand tools.Plans, lays out and performs all types of sheet metal operations to fabricate wide variety of units or products of complex design involving close tolerances.Must set up and operate all types of sheet metal machines to cut, bend or form parts.Uses a variety of sheet metal hand tools and measuring instruments.Uses shop mathematics.Working hours: 6:00 AM - 2:15 PMSkills:--High mechanical aptitude--Knowledge of CNC machines--Organizational skills--Proficient with precision measuring instruments--Must be able to read blueprints--Requires some heavy liftingEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalentRequires passing a pre-employment screening, which includes a drug screen. BENEFITS! BENEFITS! BENEFITS! The best you will ever find! Voted Best Place to Work many, many times! Employee owned! Direct Hire Position! Get in this door?..NOW!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion has partnered with a local company in The Woodlands for a Upstream Process Technician. The Upstream Process Technician will be responsible for designing, executing, and reporting experimental activities in cell culture process development laboratory.Responsibilities:Design and execute lead activities to meet the project timelinesMaintain upstream development labAssist with the overall maintenance of the production and testing facilitiesEquipment preventative maintenance and sanitationPerform quality systems checksProvide support in the receipt and distribution of incoming raw materials for research and manufacturingWrites and/or reviews protocols, development reports, standard operating procedures, and other technical reports, strictly adhering to established SOPs and regulatory requirementsAccurate and timely completion of recordsAdhere to production schedules and timelinesWorking hours: 8:00 AM - 5:00 PMSkills:Ability to communicate effectively with technicians and managementAbility to work various shiftsWillingness to work in The Woodlands and ConroeAbility to work independently and as part of a cross-functional teamAbility to multitask, understand goals, and set prioritiesStrong attention to detailEducation:BachelorsExperience:1-4 yearsQualifications:BS in Biotechnology, Microbiology, Cell Biology, or other related disciplines1-3 years of relevant industrial experience Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is hiring CNC Machinists for a valve-manufacturing company in Springville. We are looking for motivated Machinists to work with the Machine Shop team. You will be setting up and operating CNC machines as well as manual machines such as vertical/horizontal machining centers, lathes, mills, and other gear cutting equipment. The weekly schedule is a 7am-3:30pm or 3:15pm-1:45am shift, Monday through Friday with overtime available for the near future. Pay starts between $18-$27/hr depending on experience with a great opportunity to go permanent after 3-6 months of high-quality performance.Responsibilities:--Use component drawings, routers, and verbal instructions to produce parts that meet specifications--Maintain quality control by measuring and inspecting finished parts--Maintain equipment by adjusting as needed and performing routine preventative inspections--Plan and lay-out work based on design drawings or sketches--Set-up machines to properly produce any type of componentWorking hours: 7:00 AM - 3:30 AMSkills:--Metal cutting knowledge to make good decisions in fabricating parts--High attention to detail--Comfortable working around machineryEducation:High SchoolExperience:1-4 yearsQualifications:--1-2 years of related experience or a machinist Certificate--High school degree required--Ability to lift up to 50 lbs This is the perfect chance to get on with at world-class company. Apply today and we'll schedule you for a phone interview right away!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

This position is responsible for supporting automotive engineers through testing and troubleshooting prototype designs and making recommendations for continuous improvement.Responsibilities:Support vehicle content development through requirements, design, development, and QA phase.Gather information from vehicles, OE testers, and benchmark tools (reverse engineering).Access and research new information from the web as well as information related to the development of vehicle data, service instructions, and manualsIdentify and procure vehicles for analysis, development, and validation.Utilize automotive bus analyzers and diagnostic equipment to ensure the quality of productsUtilize knowledge of vehicle mechanical fundamentals in order to validate designsWorking hours: 8:00 AM - 4:30 PMSkills:Skilled in the usage of automotive test equipmentModerate knowledge and experience using PC applications such as MS Excel, MS Word, etc.Basic knowledge of databases, MS AccessPC configuration and installation skillsBasic math knowledge such as number systems, basic algebraClear and effective communication skills to work well in a team environment.Ability to follow and understand detailed test proceduresDemonstrated ability to be a self-starterDemonstrated ability to organize work and scheduleAbility to read flow charts including process maps, test plans, and flowsAbility to navigate the internet for research purposesAbility to work independently and with a teamEducation:TradeExperience:0-1 yearsQualifications:Knowledge of fundamental automotive technologiesKnowledge of basic vehicle systems including onboard controls, engine performance, transmission, ABS, and SIR modules Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

As a light Assembler, you will assemble and test high-quality products including, plastic components which meet customer and design engineering specifications.Responsibilities:Assure high-quality products through product testing including complex electronic devices.Perform setup operations for assembly.Safely operate tools and test equipment.Accurately report completion of production and complete required documentation.Respond to changes in the production schedule by prioritizing work to ensure customer and departmental requirements are met.Actively participate and support continuous improvement initiatives, utilizing established methodologies.Follow and continually monitor established safety procedures in order to promote a safe, clean work environment.Working hours: 3:30 PM - 2:00 AMSkills:Must have a good verbal and written understanding of the English languageBasic math skills including percentages, and ability to count accuratelyQuality oriented with ability to perform detailed, repetitive tasksStrong fine motor skillsAbility to work overtime including weekends and alter hours as necessaryEducation:High SchoolExperience:0-1 yearsQualifications:Minimum of a High School Degree or equivalent experience requiredSolder training preferred Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Naples is working with a rapidly growing medical device company and is actively looking to a directly hire CNC programmer.Responsibilities:- Attend meetings on NCRs, variances- Design and develop all machining fixtures- Develop CNC programs to work with setup and fixtures for optimal quality and minimal time- Work within Fusion 360 to make necessary changes- Take prototype models/prints and turn them into manufactured parts- Operate CNC machines- Monitor and verify the accuracy of each jobs initial set-up and final outcome- Maintain library of programs and configuration- Provide required documents for machine set-up (set-up sheet, visual drawings)- Create CNC programs for new development projects, typically direct from CAD model, drawingWorking hours: 8:00 AM - 4:30 PMSkills:- 3+ years of multi axis programming- Must be willing to learn new CAM programming software (Fusion 360)- 3 - years minimum experience as a CNC programmer supporting production of volume medical and firearms parts.- Knowledge on various precision CNC Machinery and principles, fabrication and machining practicesEducation:High SchoolExperience:1-4 yearsQualifications:- 3+ years of multi axis programming- Must be willing to learn new CAM programming software (Fusion 360)- 3 - years minimum experience as a CNC programmer supporting production of volume medical and firearms parts.- Knowledge on various precision CNC Machinery and principles, fabrication and machining practices Apply with a current resume for immediate consideration and brief phone screen with a member of our Professional Services recruiting team!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

As a CNC Machinist, you will support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics.3rd shift hours: Sunday night - Friday morning, 10:00 p.m. - 6:00 a.m.Pay: Starting at $21.80 an hourResponsibilities:Set up, adjust, and operate basic or specialized machine tools used to perform precision machining operations.Fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.Design fixtures, tooling, or experimental parts to meet special engineering needs.Utilize gauges, micrometers, Vernier calipers, charts, and other tools to measure tolerance, make decisions and record data.Working hours: 10:00 PM - 6:00 PMSkills:Ability to machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.Mechanically inclined and good with hand tools. Our team members.Experience in Lean Manufacturing.Experience using complex technical tools, CAD and CAM.Education:High SchoolExperience:1-4 yearsQualifications:A strong, stable work history.High school Diploma or GED equivalent is required.Degree or Certificate in CNC Machining, Completion Right Skills Now Course or equivalent experience required. This is a Direct Hire Opportunity! Please apply online or call and ask for Jennifer at 507-432-2430.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

The Professional Division of Spherion Mid Ohio is partnered with a nationally recognized organization in Willard, Ohio that is seeking a CONTRACT CAD Designer to join their team part time for a minimum of six months! This is a great time to grow in your experience and use this opportunity as a resume builder! Pay Range: $17-$20 per hour Part-time Hours: 20-30 hours per week (during AM shifts); flexible on days/hours – perfect for someone continuing to pursue their education or get back into the workforce. Potential for full time hours if needed.    Job Duties: CAD Support, Uses CAD to develop 2d and 3d Designs Create design concept drawings Work with maintenance, engineering and contractors to revise existing drawings Make sketch of proposed drawings, check dimension of parts, materials to be used, relationship of one part to another, and relationship of various parts to whole structure or project. All current work being completed in AutoCAD – must be comfortable and familiar with AutoCAD and be able to work independently. Project Planning Effectively manage and implement small projects up to $50,000. Collaboration with plant resources to balance schedules, plan work, and assets to execute projects. General Work with minimal supervision Must communicate accurately with co-workers Work with others with an attitude of cooperation and respect

As a CNC Machinist, you will support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics.2nd shift hours: Monday - Friday, 2:00 p.m. - 10:00 p.m.Pay starting at $21.80 an hourResponsibilities:Set up, adjust, and operate basic or specialized machine tools used to perform precision machining operations.Fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.Design fixtures, tooling, or experimental parts to meet special engineering needs.Utilize gauges, micrometers, Vernier calipers, charts, and other tools to measure tolerance, make decisions and record data.Working hours: 2:00 PM - 10:00 PMSkills:Ability to machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.Mechanically inclined and good with hand tools. Our team members.Experience in Lean Manufacturing.Experience using complex technical tools, CAD and CAM.Education:High SchoolExperience:1-4 yearsQualifications:A strong, stable work history.High school Diploma or GED equivalent is required.Degree or Certificate in CNC Machining, Completion Right Skills Now Course or equivalent experience required. This is a Direct Hire Opportunity! Please apply online or call and ask for Jennifer at 507-432-2430.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

.Evol Helpers report to the Converting Supervisor for the shift to which they are assigned. Primary duties / responsibilities include: - following all safety rules and practices; - learn customer requirements and specifications by reading factory work orders, print cards, and design specifications;put bundles coming off of conveyer into a stacking pattern/unitizing to go to shipping for shipment. - coordinating activities with other machine crew members to efficiently set up and run orders; - maintaining quality and production standards as required by the company; - help operators performing set up functions; such as removing and attaching cutting dies, zeroing and opening / closing the machine, raising, autosetting, and lowering the prefeeder, setting the stacker and counter-ejector portions of the machine, recovering ink and washing ink filters, installing inks, cleaning, setting, and adjusting the glue application system, and completing paperwork - continually monitoring the quality and quantity of production; - using available time to prepare for set ups and runs - performing assigned clean up functions, such as blowing down the machine, wiping off shafts, cleaning ink systems, sweeping the machine area, and picking up miscellaneous scrap; - performing quality inspections and tests, and recording findings; - following prescribed practices in all circumstances; and - performing other duties as assigned by supervision.Responsibilities:Assist with general labor needs and assist the Machine Operator with various tasks.Working hours: Various Shifts AvailableSkills:"- Ability to perform in a safe manner - Ability to work in a team environment - Ability to follow written and verbal instructions- Ability to read a tape measure and have basic math and computer skills- Ability and desire to advance into more technical roles- Good communication skills"Education:High SchoolExperience:1-4 yearsQualifications:- Experience working in fast-paced, manufacturing environment or corrugated box manufacturing experience is a plus- Must have a strong desire to grow their career within this company - Must be willing and able to work all work schedules (7AM-7PM or 7PM-7AM) as assigned, as well as overtime to include weekends and holidays." Think that you are an ideal match for this position? APPLY and GET HIRED TODAY! RECRUITING DEPARTMENT 803-731-2227 ColumbiaBranch@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

The Manufacturing Technician may be responsible for the manufacturing and / or assembly operations within any one of the following areas - Laser Machining. The role will be a hands-on interaction with the operations team ensuring daily continuity of manufacturing processes and in-process inspections / product verification. As a member of the Manufacturing Team this person will be expected to work directly with other technicians on a daily basis ensuring product integrity / quality is met at all times.Must be able to work first shift:Mon - Fri, 6:00 AM - 2:30 PM (1st shift)Mon - Fri 2:30 PM - 11:00 PM (2nd shift)Responsibilities:Responsible for manufacturing and / or assembly of medical devices in a fast-paced production environment following specific procedures and manufacturing instructions with daily goals.Perform equipment set-up, operation, and in-process inspection in order to accomplish assigned task(s).Have the ability to learn and comprehend a broad understanding of various equipment set-ups (example - laser, CNC, micro blasting, assembly) and / or general operations in a medical device manufacturing / assembly environment.Ability to perform delicate, repetitive tasks is essential to many operations in the various manufacturing departments here at the organization.Ability to physically handle small, delicate parts is crucial. Position may require using microscope up to 8 hours per day.Need to have the ability / capability to read and understand established work instructions, process guidelines, visual workmanship standards, technical drawings, cGMP / ISO / FDA documentation and design details.Must be able to understand and perform in-process inspection to assure workmanship and quality of in process medical devices.Working hours: 6:00 AM - 2:30 PM (Various Shifts Available)Skills:Good interpersonal skills and written communication skills are important.Must be able to work to production timelines, as customer satisfaction and delivery are key.Education:High SchoolExperience:0-1 yearsQualifications:Position may require standing up to 8 hours per day.Position may require working in a cleanroom environment for up to 8 hours per day.Experience in microscope inspection, small parts manufacturing, and process trouble shooting is a plus.Previous medical device manufacturing experience is preferred, but not required. Spherion's local offices are waiting to hear from you today. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Staffing has a direct hire opportunity for a Safety Manager with a local Fargo company. The Safety Manager will assess, design and implement safety training programs; review and evaluate work environments; and conduct inspections to ensure compliance with applicable laws, regulations, and work rules. Applicants need to have a Bachelor's degree and 3-5 years' of experience in a safety role in the construction or manufacturing fieldSalary $70k+ DOEResponsibilities:- Assess and research safety training needs and programs - Conduct safety-related training for all employees on safety policies, regulations and procedures - Develop, implement and coordinate cost effective safety training programs- Inspect facilities and other work areas to detect unsafe conditions, and takes corrective action as needed- Investigate accidents, injuries, illnesses, and exposures to determine cause and make corrective recommendations based upon findings; develop a process or procedure for preventing reoccurrence- Work with supervisors, injured workers, and others to facilitate return-to-work programs- Develop, implement, and conduct ongoing training of company safety program- Create and communicate weekly Safety Topics to the company employees- Work to create a positive safety culture and not one of safety through fear- Direct activities and serves as chair of safety committee- Prepare and maintain safety and emergency response plans and coordinates review/revision- Maintain SDS and chemical safety information as required by OSHA for all locations- Oversee the maintenance of DQ/DOT Files and ensures compliance with requirements, including random drug testing/post-accident drug testing and Drug & Alcohol Clearinghouse requirements- Maintain quarterly MSHA reporting- Oversee the annual OSHA 300 process- Manage the AEDs through Heart Smart online program for all locations- Oversee the workers compensation claims and workers compensation audits paperwork processesResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Bachelor's degree in a health and safety or a related field-Three to five years of experience in a safety role in the construction or manufacturing fieldEducation:BachelorsExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or email your resume to kerrimattern@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is immediately seeking Machine Operator Helper for- temp to hire positions with a Fortune 500 global leader in paper and packaging products. This company is committed to attracting and developing the right talent.-- These positions offer the opportunity for you to have stable and rewarding work, growth opportunities, and total rewards starting with leading entry-level pay that can quickly lead to top pay for performance. You will work with a stable and motivated team, the majority of whom have been with the company for more than 15 years!-In this role as a Machine Operator Helper you will have the opportunity to learn and advance into more technical roles within the company.Responsibilities:- Following all safety rules and practices;- Learn customer requirements and specifications by reading factory work orders, print cards, and design specifications;put bundles coming off of conveyer into a stacking pattern/unitizing to go to shipping for shipment.- Coordinating activities with other machine crew members to efficiently set up and run orders;- Maintaining quality and production standards as required by the company;-Help operators performing set up functions; such as removing and attaching cutting dies, zeroing and opening / closing the machine, raising, autosetting, and lowering the prefeeder, setting the stacker and counter-ejector portions of the machine, recovering ink and washing ink filters, installing inks, cleaning, setting, and adjusting the glue application system, and completing paperwork- Continually monitoring the quality and quantity of production;- Using available time to prepare for set ups and runs- performing assigned clean up functions, such as blowing down the machine, wiping off shafts, cleaning ink systems, sweeping the machine area, and picking up miscellaneous scrap;- Performing quality inspections and tests, and recording findings;- Following prescribed practices in all circumstances; and- Performing other duties as assigned by supervision.Working hours: work all work schedules (7AM-7PM or 7PM-7AM) as assigned, as well as overtime to include weekends and holidaysSkills:- Ability to perform in a safe manner- Ability to work in a team environment- Ability to follow written and verbal instructions- Ability to read a tape measure and have basic math and computer skills- Ability and desire to advance into more technical roles- Good communication skillsEducation:High SchoolExperience:1-4 yearsQualifications:- High school diploma or GED, or equivalent experience- Experience working in fast-paced, manufacturing environment or corrugated box manufacturing experience is a plus- Must have a strong desire to grow their career within this company- Must be willing and able to work all work schedules (7AM-7PM or 7PM-7AM) as assigned, as well as overtime to include weekends and holidays Think that you are an ideal match for this position? APPLY and GET HIRED TODAY!?Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

1st and 2nd shifts available!Spherion is recruiting a Production Technician for our client! This innovative company develops, manufactures and sells radiotherapy systems for alternative cancer treatments. The Production Technician is responsible for assembling, testing, and shipping activities that will allow the company to provide products that meet customer needs and in accordance with regulatory requirements. This position reports to the Production Supervisor.Responsibilities:- Assembly and manufacture of product, in accordance with quality system requirements, manufacturing procedures, and manufacturing instructions- Perform or assist in received materials, in-process product, and final product inspection/test- Participate in development and review of manufacturing procedures to help ensure manufacturing requirements and goals are achieved- Assist in development of manufacturing instructions that document and control the manufacturing process- Assist the development of manufacturing tool and fixture requirements, and promote ongoing control- Assist the training of manufacturing area personnel, as required- Assist in deployment of product changes to ensure correct implementation- Assist the development of facility requirements to accommodate production, including workflow, shelving, other storage, and workstations- Assist review of packaging and shipping requirements so the product can be transported to the customer without damage- Assist operation of the Material Rejection Area (MRA) to promote resolution of material issues, including the promotion of timely corrective action by the supplier(s)- Provide feedback to Engineering personnel concerning manufacturing needs and product enhancements that would improve both quality and ease of manufacturing/servicing of the product- Interface and support regulatory affairs as required to help ensure production processes and facilities are in accordance with FDA, OSHA and other applicable regulations- Implementation and use of special facility controls that may be required, for example ESD, cleanliness, etc.- Ensure safety and quality considerations and requirements are pro-actively addressed and implemented in product production processes- Assist in the timely resolution of safety and quality issues raised by customers or staff- Supports the companys Quality System and Safety and Health Program by following procedures and advising othersWorking hours: Various Shifts AvailableSkills:- Experience in interpretation and use of product design drawings and related documentation- Experience in the operation of heavily documented and controlled production processes- Experience in product testing and understanding of calibration control- Experience in ESD and cleanliness special control processes- Good written and verbal communication skills, with all levels of employees, suppliers, and customers are preferred- Experience with personal computer systems, including word processing, spreadsheet reports, and E-mail- Experience with safety and health (OSHA), FDA and ISO 9001 quality system requirements- Must regularly lift and/or move physical inventory weighing up to 75 pounds- Frequently required to climb ladders, kneel, crouch, or crawl as required during the manufacturing, inspection, and testing of components and products- Must be able to spend long periods of time standingEducation:High SchoolExperience:1-4 yearsQualifications:- Associate degree in a production, manufacturing engineering, general engineering field, or at least three years experience working in manufacturing or engineering activities Apply via the Apply button in the top right hand corner today!Spherion has helped thousands of people just like you find work happiness! Our experienced staf

1st and 2nd shifts available!Spherion is recruiting a Test Technician for our client! This innovative company develops, manufactures and sells radiotherapy systems for alternative cancer treatments. The Test Technician is responsible for manufacturing and shipping activities that will allow the company to provide products that meet customer needs and in accordance with regulatory requirements. This position is offered for assembly and test operations in our electronics department. Key qualifications for this role include experience with oscilloscopes, DMM and other electronic test equipment.Responsibilities:- Perform or assist in received materials, in-process product, and final product inspection/test- Participate in the development and review of manufacturing procedures to help ensure manufacturing requirements and goals are achieved- Assist in the development of manufacturing instructions, that document and control the manufacturing process- Assist the development of manufacturing tool and fixture requirements, and promote ongoing control- Assist the training of manufacturing area personnel, as required- Assist in deployment of product changes (CNs) to ensure correct implementation- Assist the development of facility requirements to accommodate production, including workflow, shelving, other storage, and workstations- Assist review of packaging and shipping requirements so the product can be transported to the customer without damage- Assist operation of the Material Rejection Area (MRA) to promote resolution of material issues, including the promotion of timely corrective action by the supplier(s)- Provide feedback to Engineering personnel concerning manufacturing needs and product enhancements that would improve both quality and ease of manufacturing/servicing of the product- Interface and support regulatory affairs as required to help ensure production processes and facilities are in accordance with FDA, OSHA and other applicable regulations- Implementation and use of special facility controls that may be required, for example, ESD, cleanliness, etc.- Ensure safety and quality considerations and requirements are proactively addressed and implemented in product production processes- Assist in the timely resolution of safety and quality issues raised by customers or staff.- Supports the companys Quality System and Safety and Health Program by following procedures and advising othersWorking hours: Various Shifts AvailableSkills:- Experience in interpretation and use of product design drawings and related documentation- Experience with personal computer systems, as well as Windows OS and related applications- Experience in the operation of heavily documented and controlled production processes- Experience in product testing and understanding of calibration control- Experience in ESD and cleanliness special control processes- Familiarity and experience with oscilloscopes, DMM and other electronic test equipment- Experience with safety and health (OSHA), FDA and ISO 9001 quality system requirements- Good written and verbal communication skills, with all levels of employees, suppliers, and customers is preferred- Must regularly lift and/or move physical inventory weighing up to 75 pounds- Frequently required to climb ladders, kneel, crouch, or crawl as required during the manufacturing, inspection, and testing of components and products- Must be able to spend long periods of time standingEducation:High SchoolExperience:1-4 yearsQualifications:- Associates or Technical degree in Electronics, Computer Technology, or related discipline is required- Three years experience working in manufacturing test or engineering activities required Apply via the Apply button in the top right hand corner today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.